Revell AV-8B Harrier Assembly Manual

Taper
Assembly Manual
Dark Ghost Gray
Dark Gray
Dark Gull Gray
Flat Black
Gloss Black
Gloss White
Gray
Gray-Green
Gunship Gray
Olive Drab
Red
Silver
Steel
Tan
Yellow
If you have any questions or comments, call our hotline at: (800) 833-3570
or, please write to:
Revell-Monogram Consumer Service Department, 725 Landwehr Road, Northbrook, Illinois 60062
Be sure to include the plan number (85687800200), part number, description, your return address and phone number.
Visit our website: www.revell-monogram.com
AV-8B HARRIER
KIT6878 85687800200
* REPEAT SEVERAL TIMES
* A REPETER PLUSIEURS FOIS
* CEMENT TOGETHER
* A COLLER
* ALTERNATIVE ASSEMBLY
* ENSEMBLAGE ALTERNATIVE
* REMOVE AND THROW AWAY
* A RETIRER ET JETER
* DO NOT CEMENT
* NE PAS COLLER
* OPTIONAL PARTS
* PIECES EN OPTION
* DECAL
* DECAL COMANIE
REVELL-MONOGRAM, LLC Northbrook, IL. Copyright © 2003. All rights reserved.
The AV-8B Harrier traces its origins back to
a British designed vertical take-off and landing
(VTOL) aircraft. The first Harrier used by the U. S.
Marine Corps was the AV-8A which entered service
in the 1960s. The present AV-8B entered service
in the mid-1980s, and it is a much larger and more
powerful variant. The payload capability of the AV-
8B is twice that of the earlier AV-8A. Capable of
operating from amphibious assault ships or unim-
proved forward areas without runways, AV-8Bs
provide close air support to Marine forces on the
ground. They can deliver a wide variety of con-
ventional and precision guided weapons to include
the latest Joint Direct Attack Munitions (JDAM) and
laser-guided bombs. For self defense, AIM-9M
Sidewinder missiles provide the Harrier with a good
air-to-air capability. AV-8Bs currently in operation
with the Marine Corps include the AV-8B II+, which
features an AN/APG-65 radar, and the Night Attack
AV-8B. During Operation Iraqi Freedom, seventy
Marine AV-8B II+ and Night Attack Harriers flew
from assault ships and shore bases to help over-
throw the regime of Saddam Hussein and liberate
the people of Iraq.
Gris fantôme foncé
Gris foncé
Gris cendré foncé
Noir mat
Noir brilliant
Blanc brilliant
Gris
Vert-gris
Gris hélicoptère
Gris vert
Rouge
Argent
Acier
Havane
Jaune
This optional paint guide is provided if
you choose to detail paint your model.
Ce guide de peinture vous sera fourni si vous choisis-
sez de peindre votre modèle en détail.
* Study the assembly drawings.
* Each plastic part is identified by a number.
* In the assembly drawings, some parts will be
marked by a star () to indicate chrome
plated plastic.
* For better paint and decal adhesion, wash
the plastic parts in a mild detergent solution.
Rinse and let air dry.
* Check the fit of each piece before
cementing in place.
* Use only cement for polystyrene plastic.
* Scrape plating and paint from areas
to be cemented.
* Allow paint to dry thoroughly before
handling parts.
* Any unused parts may be discarded.
DECAL APPLICATION INSTRUCTIONS
1. Cut desired decal from sheet.
2. Dip decal in water for a few seconds.
3. Place wet decal on paper towel.
4. Wait until decal is movable on paper backing.
5. Place decal in position on model, face up and
slide backing away.
6. Press out air bubbles with a soft damp cloth.
7. Milkiness that may appear is for better decal
adhesion and will dry clear. Wipe away any
excess adhesive.
8. Do not touch decal until fully dry.
9. Allow the decals 48 hours to dry before
applying clear coat.
NOTE: Decals are compatible with
setting solutions or solvents.
READ THIS BEFORE YOU BEGIN LIRE CE QUI SUIT AVANT DE COMMENCER
* Etudier les schémas de montage.
* Chaque pièce en plastique est identifiée par un numéro.
* Sur les schémas de montage, certaines pièces sont
marquées d'une étoile () pour indiquer qu'elles sont en
plastique chromé.
* Pour une meilleure prise de la peinture et des autocollants,
laver les pièces en plastique avec une solution détergente
peu concentrée. Les rincer et les laisser sécher à l'air.
* Vérifier que chaque pièce s'ajuste bien avant
de la coller en place.
* N'utiliser que de la colle pour polystyrène.
* Gratter les parties à coller pour enlever le chrome et la peinture.
* Laisser la peinture biencher avant de manipuler les pièces.
* Toute pièce inutilisée peut être jetée.
DIRECTIVES D'APPLICATION DES AUTOCOLLANTS
1. Découper l'autocollant désiré de la feuille.
2. Tremper l'autocollant dans de l'eau pendant quelques secondes.
3. Placer l'autocollant mouillé sur une serviette en papier.
4. Attendez que l'autocollant puisse être déplacé sur son support
en papier.
5. Mettre l'autocollant en position sur le modèle face sur
le dessus et faire glisser le support pour l'enlever.
6. Appuyer avec un chiffon doux humide pour éliminer les bulles d'air.
7. La substance laiteuse qui peut apparaître est destinée à
améliorer l'adhésion de l'autocollant et devient incolore au
séchage. Essuyer pour enlever tout excédent d'adhésif.
8. Ne pas toucher l'autocollant tant qu'il n'est pas bien sec.
9. Laisser l'autocollant sécher pendant 48 heures avant
d'appliquer une couche transparente.
REMARQUE: Les autocollants sont compatibles avec
les solutions de fixage ou les solvants.
COCKPIT AND FUSELAGE ASSEMBLY
1
1
FUSELAGE
HALF
2
FUSELAGE
HALF
RESIN NIGHT
ATTACK NOSE
7
COCKPIT
INTERIOR
DARK GULL GRAY
25
WHEEL WELL
HALF
GLOSS WHITE
26
WHEEL WELL
HALF
GLOSS WHITE
10
SEAT
SIDE
FLAT BLACK
9
SEAT
SIDE
FLAT BLACK
74
CONTROL
STICK
DARK GULL
GRAY
FLAT BLACK
FLAT BLACK
FLAT BLACK
FLAT BLACK
A B
C
F
G H
I
D E
75
THROTTLE
FLAT BLACK
8
FENCE WELL
GLOSS WHITE
STEEL
17
BRAKE WELL
GLOSS WHITE
15
COMPRESSOR
FAN
20
MAIN
GEAR STRUT
GLOSS WHITE
FLAT BLACK
OLIVE DRAB
OLIVE DRAB
OLIVE DRAB
FLAT BLACK
YELLOW
DARK GULL
GRAY
DARK GULL
GRAY INTERIOR
NOTE: USE RESIN NOSE FOR NIGHT
ATTACK VERSION OF VMA-211.
USE THE STANDARD NOSE FOR
AIRCRAFT OF VMA-311
NOTE: USE RESIN NOSE FOR NIGHT
ATTACK VERSION OF VMA-211.
USE THE STANDARD NOSE FOR
AIRCRAFT OF VMA-311
J
CUT OFF
FOR
VMA-211
NIGHT
ATTACK
VERSION
NOSE
1
4
ENGINE ASSEMBLY
2
NOSE AND MAIN WHEEL ASSEMBLY
3
19
MAIN WHEEL
HALF
FLAT BLACK
21
NOSE GEAR
STRUT HALF
GLOSS WHITE
11
INTAKE
12
INTAKE
13
INLET
DOOR
13
INLET
DOOR
22
NOSE GEAR
STRUT HALF
GLOSS WHITE
18
MAIN WHEEL
HALF
FLAT BLACK
GLOSS WHITE
GLOSS WHITE
GLOSS WHITE
18
MAIN WHEEL
HALF
FLAT BLACK
23
NOSE WHEEL
HALF
FLAT BLACK
19
MAIN WHEEL
HALF
FLAT BLACK
35
BLAST SHIELD
BURNT STEEL
36
BLAST
SHIELD
BURNT STEEL
34
NOZZLE HALF
STEEL
56
FUEL VENT
55
ENGINE
VENT
4
STABILIZER
3
STABILIZER
14
AIR
TEMPERATURE
PROBE
33
NOZZLE HALF
STEEL
31
NOZZLE HALF
STEEL
32
NOZZLE HALF
STEEL
REPEAT FOR
OTHER SIDE
FUSELAGE AND GUN PACK ASSEMBLY
4
WING AND DROP TANK ASSEMBLY
5
45
LIFT FENCE
GLOSS WHITE
5
WING TOP
90
FIN
39
DROP
TANK HALF
38
DROP
TANK HALF
37
DROP
TANK HALF
40
DROP
TANK HALF
90
FIN
6
WING
BOTTOM
16
SPEED BRAKE
GLOSS WHITE
79
BRAKE
CYLINDER
GLOSS WHITE
76
FUSELAGE
STRAKE
GRAY
29
GUN PACK
HALF
30
GUN PACK
HALF
27
AMMO PACK
HALF
28
AMMO PACK
HALF
77
FUSELAGE
STRAKE
GRAY
GLOSS
WHITE
SILVER
GLOSS
WHITE
RIGHT
LEFT
BOMB ASSEMBLY
6
MISSILE ASSEMBLY
7
42
INNER PYLON
GRAY
41
INNER PYLON
GRAY
44
OUTER
PYLON
GRAY
58
FIN
LIGHT GRAY
58
FIN
LIGHT
GRAY
43
OUTER
PYLON
GRAY
57
SIDEWINDER
LIGHT GRAY
STEEL
STEEL
STEEL
BLACK
YELLOW
YELLOW
61
BOMB HALF
OLIVE DRAB
60
BOMB HALF
OLIVE DRAB
YELLOW
61
BOMB HALF
OLIVE DRAB
60
BOMB HALF
OLIVE DRAB
STEEL
NOTE: SEE PAINTING INSTRUC
-
TIONS AT THE END OF THIS
BOOKLET FOR INFORMATION ON
HOW TO PAINT THE MISSILES
AND WHERE TO APPLY DECALS
FINAL ASSEMBLY
8
CANOPY ASSEMBLY
9
81
CANOPY
CLEAR
83
MIRRORS
FLAT BLACK
(PAINT MIRROR FACE SILVER
83
MIRROR
FLAT BLACK
(PAINT MIRROR FACE SILVER
TAN
70
CANOPY FRAME
CLEAR
A
B
C
D
46
OUTRIGGER
GEAR
47
OUTRIGGER
GEAR
78
REFUELING
PROBE
52
AIR SCOOPS
48
GEAR
COVER
49
GEAR
COVER
FLAT BLACK
FLAT BLACK
FLAT BLACK
GLOSS WHITE
(PAINT OLEO
PORTION SILVER)
GLOSS WHITE
(PAINT OLEO POR
-
TION SILVER)
84
NOSE LENS
CLEAR
73
INSTRUMENT
PANEL
FLAT BLACK
80
WINDSHIELD
CLEAR
54
PITOT TUBE
STEEL
54
PITOT TUBE
STEEL
93
YAW
INDICATOR
STEEL
82
HEAD UP
DISPLAY
FLAT BLACK
FLAT BLACK
GRAY-
GREEN
GLOSS WHITE
GRAY-GREEN
TAN
DARK
GREEN
OLIVE
GREEN
OLIVE
GREEN
OLIVE
DRAB
71
PILOT
72
PILOTS
ARM
STEEL
(NOZZLE)
NOTE: USE WATER
BASED WHITE GLUE
TO ATTACH CLEAR
CLOSED
OPEN
2
3
PAINTING NOTE:
GLOSS BLACK
INSTRUMENTS WITH
WHITE DETAILS AND
SILVER SWITCHES
DECAL PLACEMENT
10
85687800200
DECAL PLACEMENT
CONTINUED
10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Revell AV-8B Harrier Assembly Manual

Taper
Assembly Manual

dans d''autres langues