Whirlpool WOS51EC0HW Mode d'emploi

Marque: Whirlpool

Modèle: WOS51EC0HW

Catégorie: Cuisinières

Taper: Mode d'emploi

THANK YOU for purchasing this high-quality product. Register your new oven at www.whirlpool.com. In Canada, register your

oven at www.whirlpool.ca.

For future reference, please make a note of your product model and serial numbers. These can be located on the right-hand side

underneath the control panel.

Model Number __________________________________________ Serial Number ___________________________________________

Table of Contents

BUILT-IN ELECTRIC

SINGLEAND DOUBLE OVEN

USERINSTRUCTIONS

W11220321A

OVEN SAFETY ................................................................................2

OVEN USE

....................................................................................... 3

Feature Guide

............................................................................... 3

Touch Panel

..................................................................................4

Display

..........................................................................................4

Display Navigation

.......................................................................4

Cooking Methods

......................................................................... 4

Setup and Demo Mode

................................................................ 4

Favorites

.......................................................................................6

Assisted Cooking

.........................................................................6

Tools

.............................................................................................7

More Modes

.................................................................................8

Aluminum Foil

............................................................................... 9

Positioning Racks and Bakeware

................................................9

Oven Vent(s)

...............................................................................10

Preheating and Oven Temperature

............................................10

Baking and Roasting

..................................................................10

Broiling........................................................................................10

OVEN CARE

..................................................................................11

Self-Cleaning Cycle

....................................................................11

Steam Clean

...............................................................................12

General Cleaning

........................................................................12

Oven Lights

................................................................................13

TROUBLESHOOTING

..................................................................13

ASSISTANCE OR SERVICE

.........................................................15

In the U.S.A.

...............................................................................15

Accessories

................................................................................15

In Canada

...................................................................................15

WARRANTY

..................................................................................16

OVEN SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the oven, follow

basic precautions, including the following:

■ Proper Installation – Be sure the oven is properly installed

and grounded by a qualified technician.

■ Never Use the Oven for Warming or Heating the Room.

■

Do Not Leave Children Alone – Children should not be left

alone or unattended in area where oven is in use. They

should never be allowed to sit or stand on any part of the

oven.

■ Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the oven.

■ User Servicing – Do not repair or replace any part of the

oven unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

■ Storage in Oven – Flammable materials should not be

stored in an oven.

■ Do Not Use Water on Grease Fires – Smother fire or flame

or use dry chemical or foam-type extinguisher.

■ Use Only Dry Potholders – Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

■ Use Care When Opening Door – Let hot air or steam

escape before removing or replacing food.

■ Do Not Heat Unopened Food Containers – Build-up of

pressure may cause container to burst and result in injury.

■ Keep Oven Vent Ducts Unobstructed.

■ Placement of Oven Racks – Always place oven racks in

desired location while oven is cool. If rack must be moved

while oven is hot, do not let potholder contact hot heating

element in oven.

■ DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN – Heating elements may be hot

even though they are dark in color. Interior surfaces of an

oven become hot enough to cause burns. During and after

use, do not touch, or let clothing or other flammable

materials contact heating elements or interior surfaces of

oven until they have had sufficient time to cool. Other

surfaces of the oven may become hot enough to cause

burns – among these surfaces are oven vent openings and

surfaces near these openings,

oven doors, and windows of

oven doors.

For self-cleaning ovens:

■ Do Not Clean Gasket – The gasket is essential for a good

seal. Care should be taken not to rub, damage, or move

the gasket.

■ Do Not Use Oven Cleaners – No commercial oven cleaner

or oven liner protective coating of any kind should be used

in or around any part of the oven.

■ Clean Only Parts Listed in Manual.

■ Before Self-Cleaning the Oven – Remove broiler pan and

other utensils.

For smart enabled ranges and ovens:

■ Remote Operation – This appliance is configurable to allow

remote operation at any time. Do not store any flammable

materials or temperature sensitive items inside, on top or

near surface units of the appliance.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

OVEN SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING:

To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the oven, follow

basic precautions, including the following:

■ Proper Installation – Be sure the oven is properly installed

and grounded by a qualified technician.

■ Never Use the Oven for Warming or Heating the Room.

■

Do Not Leave Children Alone – Children should not be left

alone or unattended in area where oven is in use. They

should never be allowed to sit or stand on any part of the

oven.

■ Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the oven.

■ User Servicing – Do not repair or replace any part of the

oven unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

■ Storage in Oven – Flammable materials should not be

stored in an oven.

■ Do Not Use Water on Grease Fires – Smother fire or flame

or use dry chemical or foam-type extinguisher.

■ Use Only Dry Potholders – Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

■ Use Care When Opening Door – Let hot air or steam

escape before removing or replacing food.

■ Do Not Heat Unopened Food Containers – Build-up of

pressure may cause container to burst and result in injury.

■ Keep Oven Vent Ducts Unobstructed.

■ Placement of Oven Racks – Always place oven racks in

desired location while oven is cool. If rack must be moved

while oven is hot, do not let potholder contact hot heating

element in oven.

■ DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN – Heating elements may be hot

even though they are dark in color. Interior surfaces of an

oven become hot enough to cause burns. During and after

use, do not touch, or let clothing or other flammable

materials contact heating elements or interior surfaces of

oven until they have had sufficient time to cool. Other

surfaces of the oven may become hot enough to cause

burns – among these surfaces are oven vent openings and

surfaces near these openings,

oven doors, and windows of

oven doors.

For self-cleaning ovens:

■ Do Not Clean Gasket – The gasket is essential for a good

seal. Care should be taken not to rub, damage, or move

the gasket.

■ Do Not Use Oven Cleaners – No commercial oven cleaner

or oven liner protective coating of any kind should be used

in or around any part of the oven.

■ Clean Only Parts Listed in Manual.

■ Before Self-Cleaning the Oven – Remove broiler pan and

other utensils.

For smart enabled ranges and ovens:

■ Remote Operation – This appliance is configurable to allow

remote operation at any time. Do not store any flammable

materials or temperature sensitive items inside, on top or

near surface units of the appliance.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

Feature Guide

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked

Questions (FAQs) section of our website at www.whirlpool.com for more detailed instructions. In Canada, reference the Customer

Service section at www.whirlpool.ca.

Single Oven

Double Oven

Keypad Feature Instructions

Tools Oven Use

Functions

Enables you to personalize the audible tones and oven operation to suit your needs.

Seethe“Tools” and “More Modes” sections.

Home Home Screen If pressed once, it enables the user to return to the “Cooking Methods” and “Assisted

Cooking” screen. If pressed twice, the time of day is displayed.

Favorites Favorites The Favorites keypad allows the user to save the cycles that they use on a frequent basis.

Oven Light Oven Cavity

Light

The oven light is controlled by a keypad on the oven control panel. While the oven door

is closed, press the Oven Light keypad to turn the light on and off. When the oven door is

opened, the oven light will automatically turn on.

Oven Power

(Single ovens only)

Oven Function

Power

The Oven Power keypad begins oven function and wakes it from sleep mode.

Oven Cancel

(Single ovens only)

Oven Function

Cancel

The Oven Cancel keypad stops any oven function except the Clock, Timer, and Control Lock

intheselected oven.

Upper

Lower

(Double ovens

only)

Oven Function

Power/Cancel

The Upper and Lower keypad turns the selected oven on and wakes it from Sleep mode.

If the selected oven is already on, the Upper or Lower keypad stops any oven function except

the Clock, Timer, and Control Lock in the selected oven.

OVEN

UPPER/LOWER

OVEN USE

Touch Panel

The touch panel houses the control menu and function controls.

The touch keypads are very sensitive and require only a light touch

to activate. Scroll up, down, left, or right to explore the different

options and features.

For more information about the individual controls, see their

respective sections in this manual.

Display

The display is for both the menu and oven function controls. The

touch panel allows you to scroll through the oven menus. The

display is very sensitive and requires only a light touch to activate

and control.

When an oven is in use, the display will show the clock, mode,

oven temperature, kitchen timer, and oven timer, if set. If the oven

timer is not set, you can set it from this screen.

After approximately 2 minutes of inactivity, the display will go

into sleep mode and the display will dim. When the oven is in

operation, the display will remain bright.

During use, the display will show menus and the appropriate

selections for the options being chosen.

Display Navigation

If the oven is off, touch the Oven Power or Upper or Lower keypad

for the desired oven to activate the menu. From this screen, all

automatic cooking programs can be activated, all manual cooking

programs can be set, options can be adjusted, and instructions,

preparation, and tips can be accessed.

Cooking Method Feature Instructions

BAKE Baking and

Roasting

1. Press the Oven Power or Upper or Lower keypad for the desired oven.

2. Select COOKING METHODS.

3. Select BAKE.

4. Select the desired temperature by scrolling left to right or manually by selecting the grid in the

upper right corner and entering the Bake temperature into the keypad.

5. Select START to begin preheating. A tone will sound when preheating is complete.

NOTE: To quickly preheat the oven, see the “Rapid Preheat” section for more information.

6. Press the Oven Cancel or Upper or Lower keypad for the desired oven when nished.

BROIL Broiling

1. Press the Oven Power or Upper or Lower keypad for the desired oven.

2. Select COOKING METHODS.

3. Select BROIL.

4. Select the desired temperature by scrolling left to right or manually by selecting the grid in the

upper right corner and entering the Broil temperature into the keypad.

5. Select START.

6. Press the Oven Cancel or Upper or Lower keypad for the desired oven when nished.

Cooking Methods

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

Setup and Demo Mode

1. Select STORE DEMO MODE to enter Demo Mode.

1. Select NEXT to enter into product use.

2. Follow the prompts on the display screen to select a language,

set up Wi-Fi/connect to network, accept the terms of service

and set the time.

NOTE: The display screen will show the time and date (default

screen/standby mode).

3. If you selected Store Demo Mode, select TRY THE PRODUCT

to explore various features and options of the product.

NOTE: Select VIEW PRODUCT VIDEOS to view a video about

how to navigate and interact with the product and explore

Voice Control.

4. Scroll and select EXPLORE.

5. Select the Tools keypad.

To exit Demo Mode, see the “Tools” section.

Cooking Method Feature Instructions

KEEP WARM Keep Warm Food must be at serving temperature before placing it in the warmed oven.

1. Press the Oven Power or Upper or Lower keypad for the desired oven.

2. Select COOKING METHODS.

3. Select KEEP WARM.

4. Select the desired temperature by scrolling left to right or manually by selecting the grid in the

upper right corner and entering the desired temperature into the keypad.

5. Select START.

6. Press the Oven Cancel or Upper or Lower keypad for the desired oven when nished.

RAPID Rapid Oven

Preheating

Provides the fastest preheat time for the Bake function. Rapid Preheat is preset to off.

1. Select RAPID to toggle between turning the rapid preheat off and on.

2. The current setting will be displayed.

IMPORTANT: This feature should only be used for one-rack baking. Unused racks should be

removed prior to Rapid Preheat. A standard rack should be used for Rapid Preheat. If preheating

for the BAKE cycle has already started, Rapid Preheat may be started by selecting Rapid.

DELAY START Delayed Start Delay Start is used to enter the ending cook time for an oven function with a delayed start. Once

the cooking method is selected, input the bake temperature. Select DELAY START and follow the

prompts on the screen.

NOTE: Delay Start should not be used for foods such as breads and cakes because they may not

bake properly.

COOK TIME Timed

Cooking

Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length of

time, and/or shut off automatically.

Assisted Cooking

Assisted cooking helps you select the right mode for your

everyday cooking needs.

Some modes allow you to skip preheat. Follow the prompts on

screen for guidance throughout the cooking process.

Favorites

The Favorites feature stores the oven mode and temperature

for your favorite recipe. As you continue to utilize your Favorites

tool, your product will rene and tailor suggestions towards your

cooking cravings/needs.

NOTE: A select set of Favorites and suggestions may be

automatically shown on the Home screen based on your meal

times.

To save a recipe, select the Favorites keypad and follow the

prompts on the screen to customize your favorites.

Add an image or name to the favorite to customize it to your

preferences.

Assisted Cooking

Modes

Food Selections

Tips for Best Results

FROZEN Frozen Pizza

Frozen Pie

Frozen Fries

Frozen Lasagna

Frozen Nuggets

Frozen Meals

Frozen foods do not require preheat. Insert food right away. Input the

manufacturer’s maximum recommended time and temperature.

For more information, see the “Frozen Bake” section.

The Tools keypad allows you access to functions and

customization options for your oven. These tools allow you to set

the clock, change the oven temperature between Fahrenheit and

Celsius, turn the audible signals and prompts on and off, adjust

the oven calibration, change the language, and more.

Select the Tools keypad to view the Tools features:

■ Remote Enable

■ Kitchen Timer

■ Light

■ Self-Clean

■ Mute

■ Control Lock

See the “More Modes” section for more information.

Tool Notes

Remote Enable Select REMOTE ENABLE to enable the ability

to utilize the Whirlpool

app.

NOTE:

Remote Enable does not turn off

when the door is opened. Do not store any

ammable materials or temperature sensitive

items inside the oven.

Kitchen Timer Set a kitchen timer by manually entering the

desired time into the keypad.

1. Select KITCHEN TIMER.

2. Manually input the time to the desired

timer length.

3. Select START.

4. Select the Cancel keypad to end the

Kitchen Timer.

Light Select the Light keypad to turn the light on

and off. When the oven door is opened, the

oven light will automatically turn on.

Self-Clean See the “Self-Cleaning” section.

Mute Select MUTE to mute or unmute the

ovensounds.

Control Lock The Control Lock shuts down the control

panel keypads to avoid unintended use of the

oven(s). The Control Lock will remain set after

a power failure, if set before the power failure

occurs. When the control is locked, only the

Oven Power, Tools, and Oven Light keypads

will function.

The Control Lock is preset unlocked, but can

be locked.

To Lock or Unlock Control:

1. Check that the oven is off.

2. Select CONTROL LOCK.

3. “Control Lock” will display.

4. Scroll up to unlock. No keypads will

function.

Sound Volume

Set sound volume preferences.

■ Timers and Alerts

■ Buttons and Effects

Display Settings

Set the screen brightness.

■ Display Brightness

Regional

Set regional preferences.

■ Language: English, Spanish, or French

■ Temperature Units: Fahrenheit and Celsius.

Wi-Fi

■ Connect to Network: Download the Whirlpool

app from the

app store on your mobile phone. See the Connectivity Setup

sheet for more detailed instructions.

■ SAID Code: The SAID code is used to sync a smart device

with your appliance.

■ MAC Address: MAC Address is displayed for the Wi-Fi

module.

■ Wi-Fi Radio: Turn Wi-Fi on or off.

Info

■ Service and Support: Displays model number, Customer

Support contact info, and Diagnostics.

■ Store Demo Mode: Select Store Demo Mode to toggle Demo

Mode off and on.

Start Demo Mode

1. Select the Tools keypad.

2. Scroll and select INFO.

3. Select STORE DEMO MODE and select ON.

NOTE: The display screen will show the time (default screen/

stanby mode).

4. Select the Tools keypad.

5. Select TRY THE PRODUCT or VIEW PRODUCT VIDEOS.

If the unit is in Demo Mode after power up, follow these steps

to exit Demo Mode:

To Exit Demo Mode:

1. Select TRY THE PRODUCT.

2. Scroll and select EXPLORE.

3. Select the Tools keypad.

4. Scroll and select INFO.

5. Select STORE DEMO MODE and select OFF.

6. Select YES on the conrmation screen.

■ Restore Factory: This will restore your product to the original

factory default settings.

■ Wi-Fi Terms and Conditions: www.whirlpool.com/connect.

■ Software Terms and Conditions.

Tools

Preferences

Times and Dates

Set time and date preferences.

NOTE: If user is connected to Wi-Fi, time and date will be set

automatically.

■ Your Meal Times: Adjust when breakfast/lunch/dinner is

shown

■ Time

■ Date

■ Time Format (AM/PM vs 24 hour [Military Time])

More Modes

Temperature Calibration

IMPORTANT: Do not use a thermometer to measure the oven

temperature. Elements will cycle on and off as needed to maintain

a consistent temperature but may run slightly hot or cool at any

point in time due to this cycling. Opening the oven door will affect

cycling of the elements and impact the temperature.

The oven provides accurate temperatures and has been

thoroughly tested at the factory. However, it may cook faster

or slower than your previous oven, causing baking or browning

differences. If necessary, the temperature calibration can be

adjusted in either Fahrenheit or Celsius.

On double ovens, the upper oven and the lower oven can each be

calibrated independently.

A minus sign means the oven will be cooler by the displayed

amount. The absence of a minus sign means the oven will be

warmer by the displayed amount. Adjust the oven temp up to

+,-30° (+,-18°C). It is recommended to make changes in 5°F (3°C)

increments until desired results are achieved.

NOTE: The oven display will continue to show the original

settemperature and will not reect the calibration offset. For

example, if set to 350° (177°C) and calibrated to -20, the display

will continue to show 350° (177°C).

To Adjust Oven Temperature Calibration:

1. Press the Tools keypad.

2. Select MORE MODES.

3. Select TEMPERATURE CALIBRATION.

4. Scroll from left to right to increase or decrease the

temperature.

NOTE: Each oven calibration can be independently set.

Sabbath Mode

For guidance on usage and a complete list of models with

Sabbath Mode, visit www.star-k.org.

The Sabbath Mode sets the oven to remain on in a bake setting

until disabled.

When the Sabbath Mode is activated, only the Bake cycle will

operate. All other cooking and cleaning cycles are disabled. No

tones will sound, and the displays will not indicate temperature

changes. When the oven door is opened or closed, the oven light

will not turn on or off, and the heating elements will not turn on or

off immediately.

For double ovens, the upper and lower oven temperatures and

cook timers can be set independently.

If a cook timer is set, the countdown will appear. The timer will

countdown once the timer is set.

NOTE: If a power failure happens while Sabbath Mode is running,

the oven will show Sabbath Mode is on, but the Bake cycle will not

be on. If the oven door is opened during this time, the oven light

will not turn on.

To enable and activate Sabbath Mode:

1. Press the Tools keypad.

2. Select MORE MODES.

3. Select SABBATH MODE.

4. Press SABBATH MODE again to enable Sabbath Mode

(Sabbath Mode is preset to off).

5. Select YES if you would like to have both ovens or just one

oven on and baking during the Sabbath.

6. If only one oven is to be used, select that one. Once the cavity

is selected, the user will be prompted to input the temperature

and cook time.

If Sabbath Mode is to be used for both ovens, select each

oven cavity separately. Once the cavity is selected, the user

will be prompted to input the temperature and cook time for

each cavity independently.

OPTIONAL: For timed cooking in Sabbath Mode, press ADD A

COOK TIME for the selected oven, enter the desired cook time

and then press NEXT.

7. Select START.

To Disable and Exit Sabbath Mode:

1. Press the Oven Power/Cancel Keypad.

2. Press and hold the display screen for three seconds.

To Adjust Temperature for single and double oven models:

1. Press the +/- 25 on the display screen to select the new

temperature.

NOTE: The temperature adjustment will not appear on the

display, and no tones will sound.

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

nish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil

because air must be able to move freely.

To catch spills, place foil on rack below dish. Make sure foil is at

least 1/2" (13 mm) larger than the dish and that it is turned up at

the edges.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain

nish, do not place food or bakeware directly on the oven

doororbottom.

Racks

■ Position racks before turning on the oven.

■ Do not position racks with bakeware on them.

■ Make sure racks are level.

■ Place food so it will not rise into the broil element. Allow at

least 1/2" (13 mm) between pans and the broil element.

To move a rack, pull it out to the stop position, raise the front

edge, and then lift it out. Use the following illustration and charts

as a guide for positioning racks.

Rack Positions: Upper and Lower Oven

Broiling

Food Rack Position

Most broiling 6

For hamburger patties to have a well-seared exterior and a

rareinterior, use a at rack in position 6. Side 1 should cook for

approximately 3 minutes. Side 2 should cook for approximately

3to 4 minutes. Expect a moderate degree of smoke when broiling.

Traditional Cooking

Food Rack Position

Large roasts, turkeys, angel food,

bundt cakes, quick breads, pies

1 or 2

Yeast breads, casseroles,

meatandpoultry

Cookies, biscuits, mufns, cakes 2 or 3 when single-rack

baking; 2 and 5 when

multi-rack baking.

Baking Layer Cakes on Two Racks

For best results when baking cakes on two racks, use rack

positions 2 and 5 with the Bake function. Place the cakes on the

racks as shown. Keep at least 2" (5.0 cm) of space between the

front of theracks and the front of the cakes.

Baking Cookies on Two Racks

For best results when baking cookies on two racks, use rack

positions 2 and 5.

Bakeware

To cook food evenly, hot air must be able to circulate.

Allow2"(5.0cm) of space around bakeware and oven walls.

Usethefollowing chart as a guide.

Number of Pan(s) Position on Rack

1 Center of rack.

2 Side by side or slightly staggered.

3 or 4 Refer to the previous illustration.

NOTE: Bakeware materials and color may affect results. Dark,

dull, non-stick, or glass pans may require shorter baking times,

in contrast insulated or stainless steel pans may require longer

baking times. Follow bakeware manufacturer’s recommendations.

Oven Vent(s)

The oven vent(s) should not be blocked or covered since they

allow the inlet of fresh air into the cooling system. Also, the bottom

vent should not be blocked or covered since it allows the inlet of

fresh air into the cooling system and the outlet of hot air from the

cooling system. Blocking or covering vents will cause poor air

circulation, affecting cooking, cleaning, and cooling results.

Preheating and Oven Temperature

Preheating

When beginning a Bake cycle, the oven will begin preheating

after Start is pressed. The oven will take approximately 12 to 17

minutes to reach 350°F (177°C) with all of the oven racks provided

with your oven inside the oven cavity. Higher temperatures will

take longer to preheat. Thepreheat cycle rapidly increases the

oven temperature. The actual oven temperature will go above your

set temperature to offset the heat lost when your oven door is

opened to insert food. This ensures that when you place your food

in the oven, the oven, will begin at the proper temperature. Insert

your food when the preheat tone sounds. Do not open the door

during preheat before the tone sounds.

Rapid Preheat

Rapid Preheat can be used to shorten the preheating time. Only

one standard at oven rack should be in the oven during Rapid

Preheat. Extra racks should be removed prior to starting. The

preheating cycle should be completed before placing food in the

oven. When the Rapid Preheat cycle is complete, the oven starts a

normal Bake cycle.

IMPORTANT: Rapid Preheat should be used only for one-rack

baking.

Oven Temperature

While in use, the oven elements will cycle on and off as needed

to maintain a consistent temperature, but they may run slightly

hot or cool at any point in time due to this cycling. Opening the

oven door while in use will release the hot air and cool the oven

which could impact the cooking time and performance. It is

recommended to use the oven light to monitor cooking progress.

Before baking and roasting, position racks according to the

“Positioning Racks and Bakeware” section. When roasting,

itisnot necessary to wait for the oven preheat cycle to end

beforeputtingfood in unless it is recommended in the recipe.

Single and Double Oven

A. Control panel

B. Oven vent

C. Single oven or upper

double oven

G. Bottom vent

Double Oven

D. Upper oven

E. Oven vent

F. Lower oven

G. Bottom vent

Baking and Roasting

The oven will take approximately 12 to 17 minutes to reach

350°F (177°C) with all oven racks inside the oven cavity. The

preheat cycle rapidly increases the temperature inside the

oven cavity. Higher temperatures will take longer to preheat.

Factors that impact preheat times include room temperature,

oven temperature, and the number of racks. Unused oven racks

can be removed prior to preheating your oven to help reduce

preheat time. The actual oven temperature will go above the set

temperature to offset the heat lost when the oven door is opened

to insert food. This ensures that the oven will begin at the proper

temperature when you place food in the oven. Insert food when

the preheat tone sounds. Do not open the door during preheat

until the tone sounds.

During baking or roasting, the bake and broil elements will cycle

on and off in intervals to maintain the oven temperature.

Depending on the model, if the oven door is opened during baking

or roasting, the heating elements (bake and broil) will turn off

approximately 30 seconds after the door is opened. They will turn

on again approximately 30 seconds after the door is closed.

Frozen Bake

Technology automatically adjusts the

manufacturer’s bake time by combining preheating and baking

to deliver great packaged frozen food results without the wait.

There are multiple preprogramed food options. When using

Frozen Bake

Technology, it is important that you follow all

manufacturer’s instructions including venting, covering, stirring or

placing on a baking sheet to ensure a good result. When cooking

frozen meals, only cook items that provide instructions for cooking

in a conventional oven. Place your dish in the center of the rack

and select one of the rack positions recommended for Frozen

Bake in the “Positioning Racks and Bakeware” section and bake

only one package or pan at a time. Use the temperature and

maximum bake time from the package.

A tone will alert you to check the food for doneness before the

cook time is complete and again at the end of the cook time. The

display will prompt you to add additional cook time if needed.

Broiling

When broiling, no preheating is necessary unless recommended

otherwise in the recipe. Position food on grid in a broiler pan, and

then place it in the center of the oven rack. Close the oven door

toensure proper broiling temperature.

NOTE: Odors and smoke are normal the rst few times the oven

isused or if the oven is heavily soiled.

Changing the temperature when broiling allows more precise

control when cooking. The lower the broil setting, the slower

thecooking. Thicker cuts and unevenly shaped pieces of meat,

sh and poultry may cook better at lower broil settings. Place

thefood in the upper or lower oven. Refer to the “Positioning

Racks and Bakeware” section for more information.

On lower settings, the broil element will cycle on and off

tomaintain the proper temperature.

■ For best results, use a broiler pan and grid. It is designed

todrainjuices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may

beordered. Please refer to the “Accessories” section

formoreinformation.

OVEN CARE

Self-Cleaning Cycle

IMPORTANT: The health of some birds is extremely sensitive to

the fumes given off during the Self-Cleaning cycle. Exposure to the

fumes may result in death to certain birds. Always move birds to

another closed and well-ventilated room.

Self-clean the oven before it becomes heavily soiled. Heavy soil

results in longer cleaning and more smoke.

Keep the kitchen well-ventilated during the Self-Cleaning cycle

tohelp get rid of heat, odors, and smoke.

Do not block the oven vent(s) during the Self-Cleaning cycle.

Airmust be able to move freely. See the “Oven Vents” section.

Do not clean, rub, damage, or move the oven door gasket.

Thedoor gasket is essential for a good seal.

Prepare Oven:

■ Remove the broiler pan, grid, cookware and bakeware, and,

onsome models, the temperature probe from the oven.

■ Remove oven racks to keep them shiny and easy to slide.

Seethe “General Cleaning” section for more information.

■ Remove any foil from the oven because it may burn or melt,

damaging the oven.

■ Hand clean inside door edge and the 1

" (3.8 cm) area

around the inside oven cavity frame, being certain not to

move or bend the gasket. This area does not get hot enough

during high-temp self-cleaning to remove soil. Do not let water,

cleaner, etc., enter slots on door frame. Use a damp cloth to

clean this area.

■ Wipe out any loose soil to reduce smoke and avoid damage.

At high temperatures, foods react with porcelain. Staining,

etching, pitting, or faint white spots can result. This is normal

and will not affect cooking performance.

How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel in the

oven may result in discoloring, loss of gloss, hairline cracks, and

popping sounds.

The Self-Cleaning cycle uses very high temperatures, burning soil

to a powdery ash.

Suggested clean times are 3 hours for light soil, 4 hours for

medium soil, and 5 hours for heavy soil.

Once the oven has completely cooled, remove ash with a damp

cloth. To avoid breaking the glass, do not apply a cool damp cloth

to the inner door glass before it has completely cooled.

The oven lights will not work during the Self-Cleaning cycle.

NOTE: The oven has a two-speed cooling fan motor. During the

Self-Cleaning cycle, the fan(s) will operate at its highest speed to

increase airow to better exhaust the hotter air through the oven

vent(s). An increase in noise may be noticeable during and after

the Self-Cleaning cycle until the oven cools.

Before Self-Cleaning, make sure the door is closed completely

or it will not lock and the cycle will not begin. When the oven is

locked, the doors of the oven cannot be opened. To avoid damage

to the doors, do not force the doors open when the oven is locked.

1. Touch the Tools keypad.

2. Select the Self Clean icon.

(On double-oven models) Select Upper Cavity or Lower Cavity.

3. Select type of Self-Cleaning:

Steam: 1 hour: Clean up after everyday light spills using lower

heat and 1

cups (295.74 mL) of water.

High temp: 4 hours: 3 hour cycle and 1 hour cooling.

High temp: 5 hours: 4 hour cycle and 1 hour cooling.

High temp: 6 hours: 5 hour cycle and 1 hour cooling.

4. Follow the prompts on the oven display to prepare the oven.

5. Select START to begin the cleaning process.

Select DELAY START to set a delayed Self-Cleaning cycle. See

the “ToDelay Start Self-Cleaning Cycle” Section.

The oven doors will automatically lock.

NOTE: It may take a couple moments for the oven door to

automatically lock after starting the Self-Clean Cycle.

When the self cleaning cycle is complete and the oven cools,

the oven doors will unlock.

6. When the oven is completely cooled, remove ash with a damp

cloth.

To Delay Start Self-Cleaning Cycle:

Follow steps 1 through 4 above, then:

1. Select DELAY START.

2. Select the start time of when the Self-Cleaning cycle should

begin by scrolling from left to right.

3. Select START DELAY.

The oven doors will automatically lock after the Delay Start

countdown.

When the Self-Cleaning cycle is complete and the oven cools,

the oven doors will unlock.

4. When the oven is completely cooled, remove ash with a

dampcloth.

To Stop Self-Cleaning Anytime:

Touch the Oven Cancel Keypad for single oven models, or the

keypads for double oven models. If the oven temperature is too

high, the door will remain locked. It will not unlock until the oven

cools.

WARNING

Burn Hazard

Do not touch the oven during the Self-Cleaning cycle.

Keep children away from oven during

Self-Cleaning cycle.

Failure to follow these instructions can result in burns.

Steam Clean

The Steam Clean feature is designed for light oven cavity bottom

cleaning on models that have hidden bake in both ovens.

Allow the oven to cool to room temperature before using the

Steam Clean feature. If your oven cavity is above 200°F (93°C),

the Steam Clean feature will not activate until it cools down.

Remove all racks and accessories from the oven cavity.

For best results, use 10 oz (295.7 mL) of distilled or ltered water.

Do not use oven cleaners.

The Steam Clean feature will take approximately 1 hour. A tone will

sound at the end of the cycle.

IMPORTANT: Because the water in the oven bottom is hot, do not

open the oven door during the Steam Clean cycle.

Touch the Oven Cancel keypad for single oven models and the

Upper/Lower keypads for double oven models at any time to end

the cycle. The display will return to the time of day.

Helpful Hints

■ Once the Steam Clean cycle is complete and the oven is

completely cooled, remove all remaining water in the bottom

ofthe oven with a sponge or cloth.

■ Wipe any remaining moisture from the oven door interior, oven

cavity interior sides, and cooktop.

■ Use a soft brush or nylon scrubber to wipe the oven interior.

This may help with more stubborn stains.

■ It is recommended to use distilled or ltered water, as tap

water may leave mineral deposits on the oven bottom. Use

acloth soaked with vinegar or lemon juice to remove any

mineral deposits that may be left after the Steam Clean cycle.

■ If the oven is heavily soiled, use the Self-Cleaning cycle. The

Steam Clean cycle may be used rst to eliminate most of the

debris, resulting in a more effective self-cleaning.

To Steam Clean:

1. Open the oven door of the selected oven and remove all racks

and accessories from the oven cavity.

2. Pour 10 oz (295.7 mL) of distilled or ltered water into the oven

bottom. Then close the oven door.

3. Touch the Tools keypad.

(On double-oven models) Select Upper Cavity or Lower Cavity.

4. Select STEAM CLEAN.

5. Select START.

6. After approximately 1 hour, a tone will sound to signal the end

of the cycle. Touch the keypad for single oven models and the

keypads for double oven models to clear the display.

7. When the oven is completely cooled, remove any excess

waterwith a sponge or cloth and wipe down oven interior.

Ifneeded, use a non-scratch copper scrubbing pad to

removestubborn soils.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are

off andthe oven is cool. Always follow label instructions on

cleaning products. For additional information, you can visit the

FrequentlyAsked Questions (FAQs) section of our website at

www.whirlpool.com. In Canada, refer to the Customer Service

section at www.whirlpool.ca.

Soap, water, and a soft cloth or sponge are suggested rst unless

otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES

(onsomemodels)

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the entire oven is cool. These spills may

affect the nish.

Cleaning Method:

■ Glass cleaner, mild liquid cleaner or nonabrasive

scrubbingpad:

Gently clean around the model/serial/rating plate

becausescrubbing may remove numbers.

■ Affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use

soap-lled scouring pads, abrasive cleaners, steel-wool pads,

gritty washcloths or abrasive paper towels. Damage may occur

tostainless steel surfaces, even with one-time or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

■ Affresh

Stainless Steel Cleaner Part Number W10355016:

See the “Accessories” section for more information.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust

removers,ammonia or sodium hydroxide (lye) because

paintsurface may stain.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage, do not use abrasive cleaners, steel-wool pads,

gritty washcloths, or abrasive papertowels.

Cleaning Method:

■ Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly

onpanel.

■ Affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

OVEN RACKS

Cleaning Method:

■ Steel-wool pad.

■ For racks that have discolored and are harder to slide, a light

coating of vegetable oil applied to the rack guides will help

them slide.

OVEN CAVITY AND OVEN DOOR INTERIOR

Do not use oven cleaners.

Food spills should be cleaned after the oven cools. At high

temperatures, foods react with porcelain and staining, etching,

pitting, or faint white spots can result.

Cleaning Method:

■ Self-Cleaning cycle:

See the “Self-Cleaning Cycle” section rst.

■ For optimal door cleaning results, wipe away any deposits with

a damp sponge before running cycle.

Oven Lights

The oven light(s) are standard 25-watt appliance bulbs.

Beforereplacing, make sure the oven is cool and the controls

areturned off.

To Replace:

1. Disconnect power.

2. Open oven door.

3. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

4. Turn bulb counterclockwise to remove from socket.

5. Replace bulb, and then bulb cover, by turning clockwise.

6. Reconnect power.

TROUBLESHOOTING

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid

aservicecall,refer to the warranty page in this manual or visit producthelp.whirlpool.com. InCanada, visit http://www.whirlpool.ca.

In the U.S.A.:

Whirlpool Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

In Canada:

Whirlpool Brand Home Appliances

Customer eXperience Centre

200 - 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

Problem Possible Causes and/or Solutions

Nothing will operate Household fuse is blown, or a circuit breaker is tripped: Replace the fuse or reset the circuit breaker.

Ifthe problem continues, call an electrician.

Oven will not operate Control Lock is on: “Control Lock” will display on the screen. Scroll up to unlock.

Sabbath Mode is set: See the “Sabbath Mode” section.

On double oven models, one oven is self-cleaning: When one oven is self-cleaning, the other

ovencannot be set or turned on.

Oven temperature

toohighor too low

Oven temperature needs adjustment: See the “Temperature Calibration” section.

Display shows

messages

Power failure: On some models, reset the clock if needed. See “Preferences” in the “Tools” section.

Error code (display shows letter followed by number): Press the oven Cancel keypad to clear the

display. If it reapears, call for service. See the “Warranty” section for contact information.

Demo Mode (product is in Demo Mode): See “To Exit Demo Mode” in the “Tools” section.

Clean cycle did not

workonall spills

Several cooking cycles between Clean cycles or spills on oven walls and doors: Run additional

Cleancycles. The affresh

Kitchen and Appliance Cleaner can be used for stubborn soils. See the

“Accessories” and “Self-Cleaning Cycle” sections for more information.

Warm air coming

fromovenvent

Warm air coming from the oven vent is normal. During a self-clean cycle, the air stream is increased.

The cooling fan may operate both during an oven’s cycle and after the cycle has ended, causing warm

airto exit from the oven vent.

Long preheat times Not all cycles require preheating. See cycle instructions for preheat recommendations. Most cycles

preheatto 350°F (177°C) in 12 to 17 minutes. Higher temperatures will take more time. Removing

unusedoven racks prior to preheating can help reduce preheat time.

Problem Possible Causes and/or Solutions

Self-Cleaning cycle

willnotoperate

The oven door is open: Close the oven door all the way.

The function has not been entered: See the “Self-Cleaning Cycle” section.

A Timed Self-Clean cycle has been set: See the “Self-Cleaning Cycle” section.

On double oven models, one oven is self-cleaning: When one oven is self-cleaning, the other

ovencannot be set to self-clean.

Oven cooking results

notwhat expected

The set temperature was incorrect: Double-check the recipe in a reliable cookbook.

Oven temperature needs adjustment: See “Temperature Calibration” in the “More Modes”section.

Oven was not preheated: See the “Baking and Roasting” section.

Racks were positioned improperly: See the “Positioning Racks and Bakeware” section.

Not enough air circulation around bakeware: See the “Positioning Racks and Bakeware” section.

Batter distributed unevenly in pan: Check that batter is level in the pan.

Darker browning of food caused by dull or dark bakeware: Lower the oven temperature 25°F (15°C)

ormove rack to a higher position in the oven.

Lighter browning of food caused by shiny or light colored bakeware: Move rack to a lower position

inthe oven.

Incorrect length of cooking time was used: Adjust cooking time.

Oven door was not closed: Be sure that the bakeware does not keep the door from closing.

Oven door was opened during cooking: Oven peeking releases oven heat and can result in longer

cooking times.

Rack is too close to bake burner, making baked items too brown on bottom: Move rack to higher

position in the oven.

Pie crusts browning too quickly: Use aluminum foil to cover the edge of the crust and/or reduce

bakingtemperature.

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check the

“Troubleshooting” section. It may save you the cost of a service

call. If you still need help, follow the instructions below.

When calling, please know the purchase date and the complete

model and serial number of your appliance. This information will

help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you

use only FSP

replacement parts. FSP

replacement parts will

t right and work right because they are made with the same

precision used to build every new Whirlpool

appliance.

To locate FSP

replacement parts in your area, call us or your

nearest Whirlpool designated service center.

In the U.S.A.

Ifyou have any problems or questions, call Whirlpool Corporation

Connected Appliances at 1-866-333-4591.

Our consultants provide assistance with:

■ Scheduling of service. Whirlpool appliances designated

service technicians are trained to fulll the product warranty

and provide after-warranty service anywhere in the United

States.

■ Features and specications on our full line of appliances.

■ Referrals to local Whirlpool appliance dealers.

■ Installation information.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

■ Specialized customer assistance (Spanish speaking, hearing

impaired, limited vision, etc.).

Accessories

Affresh

Stainless Steel Cleaning Wipes

(stainless steel models)

Order Part Number W10355049

Affresh

Stainless Steel Cleaner

(stainless steel models)

Order Part Number W10355016

Affresh

Kitchen and Appliance Cleaner

Order Part Number W10355010

Brick Baking Stone

Order Part Number 4378577

Double Built-In Side Trim Kit

Order Part Number W10536161

Premium Broiler Pan and Roasting Rack

Order Part Number W10123240

Porcelain Broiler Pan and Grid

Order Part Number 4396923

Standard Flat Oven Rack

Order Part Number W10317430

Single Built-In Side Trim Kit

Order Part Number W10536160

For further assistance:

If you need further assistance, you can write to Whirlpool with any

questions or concerns at:

Whirlpool Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

In Canada

Ifyou have any problems or questions, call Whirlpool Corporation

Connected Appliances at 1-866-333-4591.

Our consultants provide assistance with:

■ Scheduling of service. Whirlpool appliances designated

service technicians are trained to fulll the product warranty

and provide after-warranty service anywhere in Canada.

■ Features and specications on our full line of appliances.

■ Referrals to local Whirlpool appliance dealers.

■ Use and maintenance procedures.

■ Accessory and repair parts sales.

For further assistance:

If you need further assistance, you can write to Whirlpool with any

questions or concerns at:

Customer eXperience Centre

Whirlpool Canada LP

200 - 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

11/14

IF YOU NEED SERVICE:

1. Before contacting us to arrange service, please determine whether your product requires repair. Some questions can be addressed without

service. Please take a few minutes to review the Troubleshooting or Problem Solver section of the Use and Care Guide, or visit

www.whirlpool.com/product_help.

2. All warranty service is provided exclusively by our authorized Whirlpool Service Providers. IntheU.S.and Canada, direct all requests for

warranty service to:

Whirlpool Customer eXperience Center

In the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777.

If outside the 50 United States or Canada, contact your authorized Whirlpool dealer to determine whether another warranty applies.

WHIRLPOOL

MAJORAPPLIANCE

LIMITEDWARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED

TO OBTAIN WARRANTY SERVICE.

Please have the following information available when you call the

Customer eXperience Center:

■ Name, address and telephone number

■ Model number and serial number

■ A clear, detailed description of the problem

■ Proof of purchase including dealer or retailer name and address

ONE YEAR LIMITED WARRANTY

WHAT IS COVERED WHAT IS NOT COVERED

For one year from the date of purchase,

when this major appliance is installed,

operated and maintained according to

instructions attached to or furnished

with the product, Whirlpool Corporation

or Whirlpool Canada LP (hereafter

“Whirlpool”) will pay for Factory

Specied Replacement Parts and repair

labor to correct defects in materials or

workmanship that existed when this

major appliance was purchased, or at

its sole discretion replace the product.

In the event of product replacement,

your appliance will be warranted for

the remaining term of the original unit’s

warranty period.

YOUR SOLE AND EXCLUSIVE

REMEDY UNDER THIS LIMITED

WARRANTY SHALL BE PRODUCT

REPAIR AS PROVIDED HEREIN.

Service must be provided by a

Whirlpool designated service company.

This limited warranty is valid only in

the United States or Canada and

applies only when the major appliance

is used in the country in which it was

purchased. This limited warranty is

effective from the date of original

consumer purchase. Proof of original

purchase date is required to obtain

service under this limited warranty.

1. Commercial, non-residential, multiple-family use, or use inconsistent with published user, operator or

installation instructions.

2. In-home instruction on how to use your product.

3. Service to correct improper product maintenance or installation, installation not in accordance with

electrical or plumbing codes or correction of household electrical or plumbing (i.e. house wiring, fuses

or water inlet hoses).

4. Consumable parts (i.e. light bulbs, batteries, air or water lters, preservation solutions, etc.).

5. Defects or damage caused by the use of non-genuine Whirlpool parts or accessories.

6. Conversion of products from natural gas or propane gas.

7. Damage from accident, misuse, abuse, re, oods, acts of God or use with products not approved by

Whirlpool.

8. Repairs to parts or systems to correct product damage or defects caused by unauthorized service,

alteration or modication of the appliance.

9. Cosmetic damage including scratches, dents, chips, and other damage to the appliance nishes

unless such damage results from defects in materials and workmanship and is reported to Whirlpool

within 30 days.

10. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive environments including

but not limited to high salt concentrations, high moisture or humidity or exposure to chemicals.

11. Food or medicine loss due to product failure.

12. Pick-up or delivery. This product is intended for in-home repair.

13. Travel or transportation expenses for service in remote locations where an authorized Whirlpool

servicer is not available.

14. Removal or reinstallation of inaccessible appliances or built-in xtures (i.e. trim, decorative panels,

ooring, cabinetry, islands, countertops, drywall, etc.) that interfere with servicing, removal or

replacement of the product.

15. Service or parts for appliances with original model/serial numbers removed, altered or not easily

determined.

The cost of repair or replacement under these excluded circumstances shall be borne by

thecustomer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow

limitations on the duration of implied warranties of merchantability or tness, so this limitation may not apply to you. This warranty gives you specic

legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Whirlpool makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations

contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you

should ask Whirlpool or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. WHIRLPOOL

SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of

incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specic legal rights, and you

also may have other rights that vary from state to state or province to province.

MERCI d’avoir acheté ce produit de grande qualité. Enregistrez la cuisinière sur www.whirlpool.ca.

Pour référence ultérieure, consignez par écrit les numéros de modèle et de série de votre produit. Ceux-ci se trouvent sur le côté

droit sous le tableau de commande.

Numéro de modèle ______________________________________ Numéro de série _________________________________________

Table des matières

FOUR ÉLECTRIQUE SIMPLE ET

DOUBLE, ENCASTRÉ

INSTRUCTIONS D'UTILISATION

SÉCURITÉ DU FOUR ...................................................................18

UTILISATION DU FOUR ...............................................................19

Guide des caractéristiques ........................................................19

Panneau tactile ...........................................................................20

Afchage ....................................................................................20

Méthodes de cuisson .................................................................20

Afchage du menu .....................................................................20

Mode de paramétrage et de démonstration..............................20

Favoris ........................................................................................22

Cuisson assistée ........................................................................22

Outils ..........................................................................................23

Plus de modes ...........................................................................24

Papier d’aluminium ....................................................................25

Positionnement des grilles et des ustensiles

de cuisson au four ......................................................................26

Évent(s) du four ..........................................................................27

Préchauffage et température du four .........................................27

Cuisson au four et rôtissage ......................................................28

Cuisson au gril ............................................................................28

ENTRETIEN DU FOUR .................................................................29

Programme d’autonettoyage .....................................................29

Nettoyage à la vapeur ................................................................30

Nettoyage général ......................................................................30

Lampes du four ..........................................................................31

DÉPANNAGE .................................................................................31

ASSISTANCE OU SERVICE .........................................................33

Aux É.-U. ....................................................................................33

Accessoires ................................................................................33

Au Canada ..................................................................................33

GARANTIE .....................................................................................34

SÉCURITÉ DU FOUR

Risque possible de décès ou de blessure grave si

Risque possible de décès ou de blessure grave

si vous ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

DANGER

AVERTISSEMENT

Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer.

à vous et à d’autres.

Voici le symbole d’alerte de sécurité.

vous ne suivez pas immédiatement les instructions.

blessure et ce qui peut se produire en cas de non-respect des instructions.

CONSERVER CES INSTRUCTIONS

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

AVERTISSEMENT : Afin de réduire le risque d’incendie, de choc

électrique ou de blessures corporelles lors de l’utilisation du four, il

convient d’observer certaines précautions fondamentales, notamment :

■

Installation correcte – S’assurer que le four est bien installé et que la

mise à la terre est réalisée par un technicien qualifié.

■

Ne jamais utiliser le four pour chauffer ou réchauffer la pièce.

■

Ne pas laisser les enfants seuls – Les enfants ne doivent pas être

laissés seuls ou sans surveillance dans la zone où le four est utilisé.

Ils ne doivent jamais être autorisés à s’asseoir ou à se tenir debout

sur une partie quelconque du four.

■

Porter des vêtements adaptés – Les vêtements pendants ou non

ajustés ne doivent jamais être portés lorsqu’on utilise le four.

■

Entretien par l’utilisateur – Ne pas réparer ou remplacer une

quelconque pièce du four sans recommandation spécifique du

manuel. Toutes les autres tâches d’entretien doivent être effectuées

par un technicien qualifié.

■

Entreposage dans le four – Les matières inflammables ne doivent

pas être entreposées dans le four.

■

Ne pas utiliser d’eau sur les feux de friture – Étouffer le feu ou la

flamme ou utiliser un extincteur avec agent chimique sec ou

mousseux.

■

Utiliser uniquement des mitaines sèches – Les mitaines humides ou

trempées sur les surfaces chaudes peuvent provoquer des brûlures

dues à la vapeur. Ne pas laisser les mitaines toucher des éléments

chauffants et chauds. Ne pas utiliser un chiffon ou tout autre tissu

encombrant.

■

Ouvrir la porte lentement – Laisser la chaleur ou la vapeur

s’échapper avant de retirer ou de remettre en place un plat.

■

Ne pas faire chauffer un contenant qui n’a pas été ouvert –

L’accumulation de pression pourrait faire éclater le contenant et

causer des blessures.

■

Garder dégagés les conduits de ventilation du four.

■

Position des grilles du four – toujours placer les grilles à la

position souhaitée lorsque le four est froid. Si une grille doit

être déplacée pendant que le four est chaud, ne pas laisser la

poignée entrer en contact avec l’élément chaud du four.

■

NE PAS TOUCHER LES ÉLÉMENTS CHAUFFANTS OU LES

SURFACES INTÉRIEURES DU FOUR – Les éléments

chauffants peuvent être chauds même s’ils sont de couleur

foncée. Les surfaces intérieures du four peuvent être

suffisamment chaudes pour provoquer des brûlures. Pendant et

après l’utilisation, ne pas toucher ou laisser des vêtements ou

d’autres matériaux inflammables en contact avec les éléments

chauffants ou les surfaces intérieures tant qu’ils n’ont pas

suffisamment refroidi. Les autres surfaces du four peuvent

devenir suffisamment chaudes pour causer des brûlures – les

ouvertures de ventilation et les surfaces autour de ces

ouvertures, les portes du four et les hublots de portes font

partie de ces surfaces.

Pour les fours autonettoyants :

■

Ne pas nettoyer le joint – Le joint est essentiel pour une bonne

étanchéité. Faire attention à ne pas frotter, endommager ou

déplacer le joint.

■

Ne pas utiliser de nettoyants à four – Aucun nettoyant

commercial ou revêtement de protection pour four d’aucune

sorte ne devrait être utilisé dans le four ou près de ses parties.

■

Ne nettoyer que les pièces indiquées dans le manuel.

■

Avant de mettre en marche l’autonettoyage – Enlever la

lèchefrite et les autres ustensiles.

Pour les cuisinières et fours intelligents :

■

Utilisation à distance – Cet appareil peut être configuré pour

permettre l’utilisation à distance en tout temps. Ne pas ranger

de matériaux inflammables ou sensibles à la température sur le

dessus ou près de la surface de l’appareil.

Avertissements de la Proposition 65 de l'État de la Californie:

AVERTISSEMENT: Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

cancers.

AVERTISSEMENT: Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

malformations et autres déficiences de naissance.

SÉCURITÉ DU FOUR

Risque possible de décès ou de blessure grave si

Risque possible de décès ou de blessure grave

si vous ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

DANGER

AVERTISSEMENT

Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer.

à vous et à d’autres.

Voici le symbole d’alerte de sécurité.

vous ne suivez pas immédiatement les instructions.

blessure et ce qui peut se produire en cas de non-respect des instructions.

CONSERVER CES INSTRUCTIONS

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

AVERTISSEMENT : Afin de réduire le risque d’incendie, de choc

électrique ou de blessures corporelles lors de l’utilisation du four, il

convient d’observer certaines précautions fondamentales, notamment :

■

Installation correcte – S’assurer que le four est bien installé et que la

mise à la terre est réalisée par un technicien qualifié.

■

Ne jamais utiliser le four pour chauffer ou réchauffer la pièce.

■

Ne pas laisser les enfants seuls – Les enfants ne doivent pas être

laissés seuls ou sans surveillance dans la zone où le four est utilisé.

Ils ne doivent jamais être autorisés à s’asseoir ou à se tenir debout

sur une partie quelconque du four.

■

Porter des vêtements adaptés – Les vêtements pendants ou non

ajustés ne doivent jamais être portés lorsqu’on utilise le four.

■

Entretien par l’utilisateur – Ne pas réparer ou remplacer une

quelconque pièce du four sans recommandation spécifique du

manuel. Toutes les autres tâches d’entretien doivent être effectuées

par un technicien qualifié.

■

Entreposage dans le four – Les matières inflammables ne doivent

pas être entreposées dans le four.

■

Ne pas utiliser d’eau sur les feux de friture – Étouffer le feu ou la

flamme ou utiliser un extincteur avec agent chimique sec ou

mousseux.

■

Utiliser uniquement des mitaines sèches – Les mitaines humides ou

trempées sur les surfaces chaudes peuvent provoquer des brûlures

dues à la vapeur. Ne pas laisser les mitaines toucher des éléments

chauffants et chauds. Ne pas utiliser un chiffon ou tout autre tissu

encombrant.

■

Ouvrir la porte lentement – Laisser la chaleur ou la vapeur

s’échapper avant de retirer ou de remettre en place un plat.

■

Ne pas faire chauffer un contenant qui n’a pas été ouvert –

L’accumulation de pression pourrait faire éclater le contenant et

causer des blessures.

■

Garder dégagés les conduits de ventilation du four.

■

Position des grilles du four – toujours placer les grilles à la

position souhaitée lorsque le four est froid. Si une grille doit

être déplacée pendant que le four est chaud, ne pas laisser la

poignée entrer en contact avec l’élément chaud du four.

■

NE PAS TOUCHER LES ÉLÉMENTS CHAUFFANTS OU LES

SURFACES INTÉRIEURES DU FOUR – Les éléments

chauffants peuvent être chauds même s’ils sont de couleur

foncée. Les surfaces intérieures du four peuvent être

suffisamment chaudes pour provoquer des brûlures. Pendant et

après l’utilisation, ne pas toucher ou laisser des vêtements ou

d’autres matériaux inflammables en contact avec les éléments

chauffants ou les surfaces intérieures tant qu’ils n’ont pas

suffisamment refroidi. Les autres surfaces du four peuvent

devenir suffisamment chaudes pour causer des brûlures – les

ouvertures de ventilation et les surfaces autour de ces

ouvertures, les portes du four et les hublots de portes font

partie de ces surfaces.

Pour les fours autonettoyants :

■

Ne pas nettoyer le joint – Le joint est essentiel pour une bonne

étanchéité. Faire attention à ne pas frotter, endommager ou

déplacer le joint.

■

Ne pas utiliser de nettoyants à four – Aucun nettoyant

commercial ou revêtement de protection pour four d’aucune

sorte ne devrait être utilisé dans le four ou près de ses parties.

■

Ne nettoyer que les pièces indiquées dans le manuel.

■

Avant de mettre en marche l’autonettoyage – Enlever la

lèchefrite et les autres ustensiles.

Pour les cuisinières et fours intelligents :

■

Utilisation à distance – Cet appareil peut être configuré pour

permettre l’utilisation à distance en tout temps. Ne pas ranger

de matériaux inflammables ou sensibles à la température sur le

dessus ou près de la surface de l’appareil.

Avertissements de la Proposition 65 de l'État de la Californie:

AVERTISSEMENT: Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

cancers.

AVERTISSEMENT: Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

malformations et autres déficiences de naissance.

Guide des caractéristiques

Ce manuel concerne plusieurs modèles. Le modèle que vous avez peut comporter toutes les caractéristiques énumérées ou seulement

certaines d’entre elles. Se reporter à ce manuel ou à la section Foire Aux Questions (FAQ) de notre site Web sur www.whirlpool.com pour

des instructions plus détaillées. Au Canada, consulter la section service à la clientèle à www.whirlpool.ca.

Four simple

Four double

Clavier Fonction Instructions

Outils Fonction

d’utilisation du

four

Permet de personnaliser les signaux sonores et le fonctionnement du four selon les

préférences de l’utilisateur. Voir les sections “Outils” et “Plus de modes”.

Accueil Écran Home

(Accueil)

En appuyant une fois, l’utilisateur peut accéder à l’écran des méthodes de cuisson et de la

cuisson assistée. L’heure est afchée en appuyant deux fois.

Favoris Favoris Le clavier des favoris permet à l’utilisateur de sauvegarder les programmes qu’il utilise le plus

souvent.

Lampe du four Lampe de la

cavité du four

La lampe du four est commandée par une touche située sur le tableau de commande du four.

Alors que la porte du four est fermée, appuyer sur la touche lampe du four\) pour allumer ou

éteindre la lampe. La lampe du four s’allume automatiquement à l’ouverture de la porte.

Alimentation

(fours simples

seulement)

Fonction

d’alimentation

La touche d’alimentation met en marche les fonctions du four et le réveille lorsqu’il est en

mode de veille.

Annulation

de la fonction

d'alimentation

(fours simples

seulement)

Annulation

de la fonction

d’alimentation

La touche annulation du four désactive toutes les fonctions du four à l’exception de l’horloge,

de la minuterie et du verrouillage des commandes du four sélectionné.

Supérieur/Inférieur

(fours doubles

seulement)

Alimentation/

Annulation

de la fonction

d’alimentation

du four

Les touches supérieur et inférieur mettent sous tension le four sélectionné et le réveillent

lorsqu'il est en mode de veille.

Si le four sélectionné est déjà allumé (On), la touche supérieur ou inférieur désactive toutes les

fonctions du four à l’exception de l’horloge, de la minuterie et du verrouillage des commandes

du four sélectionné.

OVEN

UPPER/LOWER

UTILISATION DU FOUR

Panneau tactile

Le panneau tactile regroupe le menu de commande et les

commandes des différentes fonctions. Le panneau tactile est très

sensible, il suft d’un léger toucher pour l’activer. Naviguer vers

le haut, le bas, la gauche ou la droite pour explorer les différentes

options et fonctions.

Pour plus d’information sur chaque commande, voir leurs sections

respectives dans ce manuel.

Afchage

L’afchage est pour le menu et les commandes de fonctionnement

du four. L’écran tactile permet de faire déler les menus du four.

L’afchage est très sensible ; il suft d’un léger toucher pour

l’activer et sélectionner les commandes.

Lorsque le four est utilisé, l’afchage indique l’horloge, le mode, la

température du four, la minuterie de cuisine, et la minuterie du four

si réglée. Si la minuterie du four n’est pas réglée, on peut la régler

à partir de cet écran.

Après environ 2 minutes d’inactivité, l’afchage passe au mode

de veille et l’afchage s’assombrit. Lorsque le four fonctionne,

l’afchage reste lumineux.

Au cours de l’utilisation, l’afchage indique les menus et les

sélections appropriées pour les options choisies.

Afchage du menu

Si le four est éteint, appuyer sur la touche alimentation du four ou

supérieur/inférieur du four désiré pour activer le menu. À partir de

cet écran, tous les programmes de cuisson automatique peuvent

être activés; tous les programmes de cuisson manuels peuvent

être réglés; les options peuvent être ajustées et les instructions,

les directives de préparation et les conseils sont accessibles.

Méthode de

cuisson

Fonction Instructions

BAKE

(cuisson au

four)

Cuisson

au four et

rôtissage

1. Appuyer sur la touche alimentation du four ou supérieur/inférieur pour le four désiré.

2. Sélectionner COOKING METHODS (méthodes de cuisson).

3. Sélectionner BAKE (cuisson).

4. Sélectionner la température de CUISSON souhaitée en naviguant vers la gauche et la droite ou

manuellement à l’aide de la grille située dans le coin supérieur droit pour saisir la température de

cuisson à l’aide du clavier.

5. Appuyer sur START (démarrer) pour commencer le préchauffage. Une tonalité se fait entendre une fois

le préchauffage terminé.

OPTIONELLE: Consulter la section “Préchauffage rapide” pour obtenir plus d’information sur le

préchauffage rapide du four.

6. Appuyer sur la touche annulation de la fonction d'alimentation du four ou supérieur/inférieur pour le

four désiré lorsque le tout est terminé.

Méthodes de cuisson

AVERTISSEMENT

Risque d'empoisonnement alimentaire

Ne pas laisser des aliments dans un four plus d'une

heure avant ou après la cuisson.

Le non-respect de cette instruction peut causer un

empoisonnement alimentaire ou une maladie.

Mode de paramétrage et de

démonstration

1. Sélectionner STORE DEMO MODE (mode de démonstration

en magasin) pour activer ce mode.

1. Sélectionner NEXT (suivant) pour utiliser le produit.

2. Suivre les instructions à l’écran pour sélectionner une langue,

congurer Wi-Fi/connexion au réseau, accepter les modalités

et régler l’heure.

REMARQUE: L’écran afche l’heure et la date (écran par

défaut/mode Veille).

3. Sélectionner TRY THE PRODUCT (essayer le produit) pour

découvrir diverses caractéristiques et options du produit.

FACULTATIF: Sélectionner VIEW PRODUCT VIDEOS (afcher

les vidéos du produit) pour afcher une vidéo sur la façon

de naviguer et d’interagir avec le produit et d’explorer Voice

Control (commande vocale).

4. Faire déler l’écran et sélectionner EXPLORE (explorer).

5. Sélectionner la touche outils.

Pour quitter le mode Demo (démonstration), voir la

section“Outils”.

La page charge ...

Whirlpool WOS51EC0HW Mode d'emploi

Marque: Whirlpool

Modèle: WOS51EC0HW

Catégorie: Cuisinières

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Whirlpool WOS51EC0HW User guide
español: Whirlpool WOS51EC0HW Guía del usuario
português: Whirlpool WOS51EC0HW Guia de usuario

Autres documents

KitchenAid KOSE900HBS Le manuel du propriétaire