Whirlpool WOS51EC0HW Mode d'emploi

Catégorie
Cuisinières
Taper
Mode d'emploi
THANK YOU for purchasing this high-quality product. Register your new oven at www.whirlpool.com. In Canada, register your
oven at www.whirlpool.ca.
For future reference, please make a note of your product model and serial numbers. These can be located on the right-hand side
underneath the control panel.
Model Number __________________________________________ Serial Number ___________________________________________
Table of Contents
BUILT-IN ELECTRIC
SINGLEAND DOUBLE OVEN
USERINSTRUCTIONS
W11220321A
OVEN SAFETY ................................................................................2
OVEN USE
....................................................................................... 3
Feature Guide
............................................................................... 3
Touch Panel
..................................................................................4
Display
..........................................................................................4
Display Navigation
.......................................................................4
Cooking Methods
......................................................................... 4
Setup and Demo Mode
................................................................ 4
Favorites
.......................................................................................6
Assisted Cooking
.........................................................................6
Tools
.............................................................................................7
More Modes
.................................................................................8
Aluminum Foil
............................................................................... 9
Positioning Racks and Bakeware
................................................9
Oven Vent(s)
...............................................................................10
Preheating and Oven Temperature
............................................10
Baking and Roasting
..................................................................10
Broiling........................................................................................10
OVEN CARE
..................................................................................11
Self-Cleaning Cycle
....................................................................11
Steam Clean
...............................................................................12
General Cleaning
........................................................................12
Oven Lights
................................................................................13
TROUBLESHOOTING
..................................................................13
ASSISTANCE OR SERVICE
.........................................................15
In the U.S.A.
...............................................................................15
Accessories
................................................................................15
In Canada
...................................................................................15
WARRANTY
..................................................................................16
2
OVEN SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the oven, follow
basic precautions, including the following:
Proper Installation Be sure the oven is properly installed
and grounded by a qualified technician.
Never Use the Oven for Warming or Heating the Room.
Do Not Leave Children Alone Children should not be left
alone or unattended in area where oven is in use. They
should never be allowed to sit or stand on any part of the
oven.
Wear Proper Apparel Loose-fitting or hanging garments
should never be worn while using the oven.
User Servicing Do not repair or replace any part of the
oven unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
Storage in Oven Flammable materials should not be
stored in an oven.
Do Not Use Water on Grease Fires Smother fire or flame
or use dry chemical or foam-type extinguisher.
Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
Use Care When Opening Door – Let hot air or steam
escape before removing or replacing food.
Do Not Heat Unopened Food Containers Build-up of
pressure may cause container to burst and result in injury.
Keep Oven Vent Ducts Unobstructed.
Placement of Oven Racks – Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN Heating elements may be hot
even though they are dark in color. Interior surfaces of an
oven become hot enough to cause burns. During and after
use, do not touch, or let clothing or other flammable
materials contact heating elements or interior surfaces of
oven until they have had sufficient time to cool. Other
surfaces of the oven may become hot enough to cause
burns – among these surfaces are oven vent openings and
surfaces near these openings,
oven doors, and windows of
oven doors.
For self-cleaning ovens:
Do Not Clean Gasket – The gasket is essential for a good
seal. Care should be taken not to rub, damage, or move
the gasket.
Do Not Use Oven Cleaners – No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
Clean Only Parts Listed in Manual.
Before Self-Cleaning the Oven – Remove broiler pan and
other utensils.
For smart enabled ranges and ovens:
Remote Operation This appliance is configurable to allow
remote operation at any time. Do not store any flammable
materials or temperature sensitive items inside, on top or
near surface units of the appliance.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
3
OVEN SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the oven, follow
basic precautions, including the following:
Proper Installation Be sure the oven is properly installed
and grounded by a qualified technician.
Never Use the Oven for Warming or Heating the Room.
Do Not Leave Children Alone Children should not be left
alone or unattended in area where oven is in use. They
should never be allowed to sit or stand on any part of the
oven.
Wear Proper Apparel Loose-fitting or hanging garments
should never be worn while using the oven.
User Servicing Do not repair or replace any part of the
oven unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
Storage in Oven Flammable materials should not be
stored in an oven.
Do Not Use Water on Grease Fires Smother fire or flame
or use dry chemical or foam-type extinguisher.
Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
Use Care When Opening Door – Let hot air or steam
escape before removing or replacing food.
Do Not Heat Unopened Food Containers Build-up of
pressure may cause container to burst and result in injury.
Keep Oven Vent Ducts Unobstructed.
Placement of Oven Racks – Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN Heating elements may be hot
even though they are dark in color. Interior surfaces of an
oven become hot enough to cause burns. During and after
use, do not touch, or let clothing or other flammable
materials contact heating elements or interior surfaces of
oven until they have had sufficient time to cool. Other
surfaces of the oven may become hot enough to cause
burns – among these surfaces are oven vent openings and
surfaces near these openings,
oven doors, and windows of
oven doors.
For self-cleaning ovens:
Do Not Clean Gasket – The gasket is essential for a good
seal. Care should be taken not to rub, damage, or move
the gasket.
Do Not Use Oven Cleaners – No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
Clean Only Parts Listed in Manual.
Before Self-Cleaning the Oven – Remove broiler pan and
other utensils.
For smart enabled ranges and ovens:
Remote Operation This appliance is configurable to allow
remote operation at any time. Do not store any flammable
materials or temperature sensitive items inside, on top or
near surface units of the appliance.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
Feature Guide
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked
Questions (FAQs) section of our website at www.whirlpool.com for more detailed instructions. In Canada, reference the Customer
Service section at www.whirlpool.ca.
Single Oven
Double Oven
Keypad Feature Instructions
Tools Oven Use
Functions
Enables you to personalize the audible tones and oven operation to suit your needs.
Seethe“Tools” and “More Modes” sections.
Home Home Screen If pressed once, it enables the user to return to the “Cooking Methods” and “Assisted
Cooking” screen. If pressed twice, the time of day is displayed.
Favorites Favorites The Favorites keypad allows the user to save the cycles that they use on a frequent basis.
Oven Light Oven Cavity
Light
The oven light is controlled by a keypad on the oven control panel. While the oven door
is closed, press the Oven Light keypad to turn the light on and off. When the oven door is
opened, the oven light will automatically turn on.
Oven Power
(Single ovens only)
Oven Function
Power
The Oven Power keypad begins oven function and wakes it from sleep mode.
Oven Cancel
(Single ovens only)
Oven Function
Cancel
The Oven Cancel keypad stops any oven function except the Clock, Timer, and Control Lock
intheselected oven.
Upper
Lower
(Double ovens
only)
Oven Function
Power/Cancel
The Upper and Lower keypad turns the selected oven on and wakes it from Sleep mode.
If the selected oven is already on, the Upper or Lower keypad stops any oven function except
the Clock, Timer, and Control Lock in the selected oven.
OVEN
UPPER/LOWER
OVEN USE
4
Touch Panel
The touch panel houses the control menu and function controls.
The touch keypads are very sensitive and require only a light touch
to activate. Scroll up, down, left, or right to explore the different
options and features.
For more information about the individual controls, see their
respective sections in this manual.
Display
The display is for both the menu and oven function controls. The
touch panel allows you to scroll through the oven menus. The
display is very sensitive and requires only a light touch to activate
and control.
When an oven is in use, the display will show the clock, mode,
oven temperature, kitchen timer, and oven timer, if set. If the oven
timer is not set, you can set it from this screen.
After approximately 2 minutes of inactivity, the display will go
into sleep mode and the display will dim. When the oven is in
operation, the display will remain bright.
During use, the display will show menus and the appropriate
selections for the options being chosen.
Display Navigation
If the oven is off, touch the Oven Power or Upper or Lower keypad
for the desired oven to activate the menu. From this screen, all
automatic cooking programs can be activated, all manual cooking
programs can be set, options can be adjusted, and instructions,
preparation, and tips can be accessed.
Cooking Method Feature Instructions
BAKE Baking and
Roasting
1. Press the Oven Power or Upper or Lower keypad for the desired oven.
2. Select COOKING METHODS.
3. Select BAKE.
4. Select the desired temperature by scrolling left to right or manually by selecting the grid in the
upper right corner and entering the Bake temperature into the keypad.
5. Select START to begin preheating. A tone will sound when preheating is complete.
NOTE: To quickly preheat the oven, see the “Rapid Preheat” section for more information.
6. Press the Oven Cancel or Upper or Lower keypad for the desired oven when nished.
BROIL Broiling
1. Press the Oven Power or Upper or Lower keypad for the desired oven.
2. Select COOKING METHODS.
3. Select BROIL.
4. Select the desired temperature by scrolling left to right or manually by selecting the grid in the
upper right corner and entering the Broil temperature into the keypad.
5. Select START.
6. Press the Oven Cancel or Upper or Lower keypad for the desired oven when nished.
Cooking Methods
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
Setup and Demo Mode
1. Select STORE DEMO MODE to enter Demo Mode.
OR
1. Select NEXT to enter into product use.
2. Follow the prompts on the display screen to select a language,
set up Wi-Fi/connect to network, accept the terms of service
and set the time.
NOTE: The display screen will show the time and date (default
screen/standby mode).
3. If you selected Store Demo Mode, select TRY THE PRODUCT
to explore various features and options of the product.
NOTE: Select VIEW PRODUCT VIDEOS to view a video about
how to navigate and interact with the product and explore
Voice Control.
4. Scroll and select EXPLORE.
5. Select the Tools keypad.
To exit Demo Mode, see the “Tools” section.
5
Cooking Method Feature Instructions
KEEP WARM Keep Warm Food must be at serving temperature before placing it in the warmed oven.
1. Press the Oven Power or Upper or Lower keypad for the desired oven.
2. Select COOKING METHODS.
3. Select KEEP WARM.
4. Select the desired temperature by scrolling left to right or manually by selecting the grid in the
upper right corner and entering the desired temperature into the keypad.
5. Select START.
6. Press the Oven Cancel or Upper or Lower keypad for the desired oven when nished.
RAPID Rapid Oven
Preheating
Provides the fastest preheat time for the Bake function. Rapid Preheat is preset to off.
1. Select RAPID to toggle between turning the rapid preheat off and on.
2. The current setting will be displayed.
IMPORTANT: This feature should only be used for one-rack baking. Unused racks should be
removed prior to Rapid Preheat. A standard rack should be used for Rapid Preheat. If preheating
for the BAKE cycle has already started, Rapid Preheat may be started by selecting Rapid.
DELAY START Delayed Start Delay Start is used to enter the ending cook time for an oven function with a delayed start. Once
the cooking method is selected, input the bake temperature. Select DELAY START and follow the
prompts on the screen.
NOTE: Delay Start should not be used for foods such as breads and cakes because they may not
bake properly.
COOK TIME Timed
Cooking
Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length of
time, and/or shut off automatically.
6
Assisted Cooking
Assisted cooking helps you select the right mode for your
everyday cooking needs.
Some modes allow you to skip preheat. Follow the prompts on
screen for guidance throughout the cooking process.
Favorites
The Favorites feature stores the oven mode and temperature
for your favorite recipe. As you continue to utilize your Favorites
tool, your product will rene and tailor suggestions towards your
cooking cravings/needs.
NOTE: A select set of Favorites and suggestions may be
automatically shown on the Home screen based on your meal
times.
To save a recipe, select the Favorites keypad and follow the
prompts on the screen to customize your favorites.
Add an image or name to the favorite to customize it to your
preferences.
Assisted Cooking
Modes
Food Selections
Tips for Best Results
FROZEN Frozen Pizza
Frozen Pie
Frozen Fries
Frozen Lasagna
Frozen Nuggets
Frozen Meals
Frozen foods do not require preheat. Insert food right away. Input the
manufacturer’s maximum recommended time and temperature.
For more information, see the “Frozen Bake” section.
7
The Tools keypad allows you access to functions and
customization options for your oven. These tools allow you to set
the clock, change the oven temperature between Fahrenheit and
Celsius, turn the audible signals and prompts on and off, adjust
the oven calibration, change the language, and more.
Select the Tools keypad to view the Tools features:
Remote Enable
Kitchen Timer
Light
Self-Clean
Mute
Control Lock
See the “More Modes” section for more information.
Tool Notes
Remote Enable Select REMOTE ENABLE to enable the ability
to utilize the Whirlpool
®
app.
NOTE:
Remote Enable does not turn off
when the door is opened. Do not store any
ammable materials or temperature sensitive
items inside the oven.
Kitchen Timer Set a kitchen timer by manually entering the
desired time into the keypad.
1. Select KITCHEN TIMER.
2. Manually input the time to the desired
timer length.
3. Select START.
4. Select the Cancel keypad to end the
Kitchen Timer.
Light Select the Light keypad to turn the light on
and off. When the oven door is opened, the
oven light will automatically turn on.
Self-Clean See the “Self-Cleaning” section.
Mute Select MUTE to mute or unmute the
ovensounds.
Control Lock The Control Lock shuts down the control
panel keypads to avoid unintended use of the
oven(s). The Control Lock will remain set after
a power failure, if set before the power failure
occurs. When the control is locked, only the
Oven Power, Tools, and Oven Light keypads
will function.
The Control Lock is preset unlocked, but can
be locked.
To Lock or Unlock Control:
1. Check that the oven is off.
2. Select CONTROL LOCK.
3. “Control Lock” will display.
4. Scroll up to unlock. No keypads will
function.
Sound Volume
Set sound volume preferences.
Timers and Alerts
Buttons and Effects
Display Settings
Set the screen brightness.
Display Brightness
Regional
Set regional preferences.
Language: English, Spanish, or French
Temperature Units: Fahrenheit and Celsius.
Wi-Fi
Connect to Network: Download the Whirlpool
®
app from the
app store on your mobile phone. See the Connectivity Setup
sheet for more detailed instructions.
SAID Code: The SAID code is used to sync a smart device
with your appliance.
MAC Address: MAC Address is displayed for the Wi-Fi
module.
Wi-Fi Radio: Turn Wi-Fi on or off.
Info
Service and Support: Displays model number, Customer
Support contact info, and Diagnostics.
Store Demo Mode: Select Store Demo Mode to toggle Demo
Mode off and on.
Start Demo Mode
1. Select the Tools keypad.
2. Scroll and select INFO.
3. Select STORE DEMO MODE and select ON.
NOTE: The display screen will show the time (default screen/
stanby mode).
4. Select the Tools keypad.
5. Select TRY THE PRODUCT or VIEW PRODUCT VIDEOS.
If the unit is in Demo Mode after power up, follow these steps
to exit Demo Mode:
To Exit Demo Mode:
1. Select TRY THE PRODUCT.
2. Scroll and select EXPLORE.
3. Select the Tools keypad.
4. Scroll and select INFO.
5. Select STORE DEMO MODE and select OFF.
6. Select YES on the conrmation screen.
Restore Factory: This will restore your product to the original
factory default settings.
Wi-Fi Terms and Conditions: www.whirlpool.com/connect.
Software Terms and Conditions.
Tools
Preferences
Times and Dates
Set time and date preferences.
NOTE: If user is connected to Wi-Fi, time and date will be set
automatically.
Your Meal Times: Adjust when breakfast/lunch/dinner is
shown
Time
Date
Time Format (AM/PM vs 24 hour [Military Time])
8
More Modes
Temperature Calibration
IMPORTANT: Do not use a thermometer to measure the oven
temperature. Elements will cycle on and off as needed to maintain
a consistent temperature but may run slightly hot or cool at any
point in time due to this cycling. Opening the oven door will affect
cycling of the elements and impact the temperature.
The oven provides accurate temperatures and has been
thoroughly tested at the factory. However, it may cook faster
or slower than your previous oven, causing baking or browning
differences. If necessary, the temperature calibration can be
adjusted in either Fahrenheit or Celsius.
On double ovens, the upper oven and the lower oven can each be
calibrated independently.
A minus sign means the oven will be cooler by the displayed
amount. The absence of a minus sign means the oven will be
warmer by the displayed amount. Adjust the oven temp up to
+,-30° (+,-18°C). It is recommended to make changes in 5°F (3°C)
increments until desired results are achieved.
NOTE: The oven display will continue to show the original
settemperature and will not reect the calibration offset. For
example, if set to 350° (177°C) and calibrated to -20, the display
will continue to show 350° (177°C).
To Adjust Oven Temperature Calibration:
1. Press the Tools keypad.
2. Select MORE MODES.
3. Select TEMPERATURE CALIBRATION.
4. Scroll from left to right to increase or decrease the
temperature.
NOTE: Each oven calibration can be independently set.
Sabbath Mode
For guidance on usage and a complete list of models with
Sabbath Mode, visit www.star-k.org.
The Sabbath Mode sets the oven to remain on in a bake setting
until disabled.
When the Sabbath Mode is activated, only the Bake cycle will
operate. All other cooking and cleaning cycles are disabled. No
tones will sound, and the displays will not indicate temperature
changes. When the oven door is opened or closed, the oven light
will not turn on or off, and the heating elements will not turn on or
off immediately.
For double ovens, the upper and lower oven temperatures and
cook timers can be set independently.
If a cook timer is set, the countdown will appear. The timer will
countdown once the timer is set.
NOTE: If a power failure happens while Sabbath Mode is running,
the oven will show Sabbath Mode is on, but the Bake cycle will not
be on. If the oven door is opened during this time, the oven light
will not turn on.
To enable and activate Sabbath Mode:
1. Press the Tools keypad.
2. Select MORE MODES.
3. Select SABBATH MODE.
4. Press SABBATH MODE again to enable Sabbath Mode
(Sabbath Mode is preset to off).
5. Select YES if you would like to have both ovens or just one
oven on and baking during the Sabbath.
6. If only one oven is to be used, select that one. Once the cavity
is selected, the user will be prompted to input the temperature
and cook time.
If Sabbath Mode is to be used for both ovens, select each
oven cavity separately. Once the cavity is selected, the user
will be prompted to input the temperature and cook time for
each cavity independently.
OPTIONAL: For timed cooking in Sabbath Mode, press ADD A
COOK TIME for the selected oven, enter the desired cook time
and then press NEXT.
7. Select START.
To Disable and Exit Sabbath Mode:
1. Press the Oven Power/Cancel Keypad.
2. Press and hold the display screen for three seconds.
To Adjust Temperature for single and double oven models:
1. Press the +/- 25 on the display screen to select the new
temperature.
NOTE: The temperature adjustment will not appear on the
display, and no tones will sound.
9
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom
nish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire oven rack with foil
because air must be able to move freely.
To catch spills, place foil on rack below dish. Make sure foil is at
least 1/2" (13 mm) larger than the dish and that it is turned up at
the edges.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain
nish, do not place food or bakeware directly on the oven
doororbottom.
Racks
Position racks before turning on the oven.
Do not position racks with bakeware on them.
Make sure racks are level.
Place food so it will not rise into the broil element. Allow at
least 1/2" (13 mm) between pans and the broil element.
To move a rack, pull it out to the stop position, raise the front
edge, and then lift it out. Use the following illustration and charts
as a guide for positioning racks.
Rack Positions: Upper and Lower Oven
Broiling
Food Rack Position
Most broiling 6
For hamburger patties to have a well-seared exterior and a
rareinterior, use a at rack in position 6. Side 1 should cook for
approximately 3 minutes. Side 2 should cook for approximately
3to 4 minutes. Expect a moderate degree of smoke when broiling.
6
5
4
3
2
1
Traditional Cooking
Food Rack Position
Large roasts, turkeys, angel food,
bundt cakes, quick breads, pies
1 or 2
Yeast breads, casseroles,
meatandpoultry
2
Cookies, biscuits, mufns, cakes 2 or 3 when single-rack
baking; 2 and 5 when
multi-rack baking.
Baking Layer Cakes on Two Racks
For best results when baking cakes on two racks, use rack
positions 2 and 5 with the Bake function. Place the cakes on the
racks as shown. Keep at least 2" (5.0 cm) of space between the
front of theracks and the front of the cakes.
Baking Cookies on Two Racks
For best results when baking cookies on two racks, use rack
positions 2 and 5.
Bakeware
To cook food evenly, hot air must be able to circulate.
Allow2"(5.0cm) of space around bakeware and oven walls.
Usethefollowing chart as a guide.
Number of Pan(s) Position on Rack
1 Center of rack.
2 Side by side or slightly staggered.
3 or 4 Refer to the previous illustration.
NOTE: Bakeware materials and color may affect results. Dark,
dull, non-stick, or glass pans may require shorter baking times,
in contrast insulated or stainless steel pans may require longer
baking times. Follow bakeware manufacturer’s recommendations.
10
Oven Vent(s)
The oven vent(s) should not be blocked or covered since they
allow the inlet of fresh air into the cooling system. Also, the bottom
vent should not be blocked or covered since it allows the inlet of
fresh air into the cooling system and the outlet of hot air from the
cooling system. Blocking or covering vents will cause poor air
circulation, affecting cooking, cleaning, and cooling results.
Preheating and Oven Temperature
Preheating
When beginning a Bake cycle, the oven will begin preheating
after Start is pressed. The oven will take approximately 12 to 17
minutes to reach 350°F (177°C) with all of the oven racks provided
with your oven inside the oven cavity. Higher temperatures will
take longer to preheat. Thepreheat cycle rapidly increases the
oven temperature. The actual oven temperature will go above your
set temperature to offset the heat lost when your oven door is
opened to insert food. This ensures that when you place your food
in the oven, the oven, will begin at the proper temperature. Insert
your food when the preheat tone sounds. Do not open the door
during preheat before the tone sounds.
Rapid Preheat
Rapid Preheat can be used to shorten the preheating time. Only
one standard at oven rack should be in the oven during Rapid
Preheat. Extra racks should be removed prior to starting. The
preheating cycle should be completed before placing food in the
oven. When the Rapid Preheat cycle is complete, the oven starts a
normal Bake cycle.
IMPORTANT: Rapid Preheat should be used only for one-rack
baking.
Oven Temperature
While in use, the oven elements will cycle on and off as needed
to maintain a consistent temperature, but they may run slightly
hot or cool at any point in time due to this cycling. Opening the
oven door while in use will release the hot air and cool the oven
which could impact the cooking time and performance. It is
recommended to use the oven light to monitor cooking progress.
Before baking and roasting, position racks according to the
“Positioning Racks and Bakeware” section. When roasting,
itisnot necessary to wait for the oven preheat cycle to end
beforeputtingfood in unless it is recommended in the recipe.
E
D
F
B
A
C
G
Single and Double Oven
A. Control panel
B. Oven vent
C. Single oven or upper
double oven
G. Bottom vent
Double Oven
D. Upper oven
E. Oven vent
F. Lower oven
G. Bottom vent
Baking and Roasting
The oven will take approximately 12 to 17 minutes to reach
350°F (177°C) with all oven racks inside the oven cavity. The
preheat cycle rapidly increases the temperature inside the
oven cavity. Higher temperatures will take longer to preheat.
Factors that impact preheat times include room temperature,
oven temperature, and the number of racks. Unused oven racks
can be removed prior to preheating your oven to help reduce
preheat time. The actual oven temperature will go above the set
temperature to offset the heat lost when the oven door is opened
to insert food. This ensures that the oven will begin at the proper
temperature when you place food in the oven. Insert food when
the preheat tone sounds. Do not open the door during preheat
until the tone sounds.
During baking or roasting, the bake and broil elements will cycle
on and off in intervals to maintain the oven temperature.
Depending on the model, if the oven door is opened during baking
or roasting, the heating elements (bake and broil) will turn off
approximately 30 seconds after the door is opened. They will turn
on again approximately 30 seconds after the door is closed.
Frozen Bake
TM
Frozen Bake
TM
Technology automatically adjusts the
manufacturer’s bake time by combining preheating and baking
to deliver great packaged frozen food results without the wait.
There are multiple preprogramed food options. When using
Frozen Bake
TM
Technology, it is important that you follow all
manufacturer’s instructions including venting, covering, stirring or
placing on a baking sheet to ensure a good result. When cooking
frozen meals, only cook items that provide instructions for cooking
in a conventional oven. Place your dish in the center of the rack
and select one of the rack positions recommended for Frozen
Bake in the “Positioning Racks and Bakeware” section and bake
only one package or pan at a time. Use the temperature and
maximum bake time from the package.
A tone will alert you to check the food for doneness before the
cook time is complete and again at the end of the cook time. The
display will prompt you to add additional cook time if needed.
Broiling
When broiling, no preheating is necessary unless recommended
otherwise in the recipe. Position food on grid in a broiler pan, and
then place it in the center of the oven rack. Close the oven door
toensure proper broiling temperature.
NOTE: Odors and smoke are normal the rst few times the oven
isused or if the oven is heavily soiled.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting, the slower
thecooking. Thicker cuts and unevenly shaped pieces of meat,
sh and poultry may cook better at lower broil settings. Place
thefood in the upper or lower oven. Refer to the “Positioning
Racks and Bakeware” section for more information.
On lower settings, the broil element will cycle on and off
tomaintain the proper temperature.
For best results, use a broiler pan and grid. It is designed
todrainjuices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may
beordered. Please refer to the “Accessories” section
formoreinformation.
11
OVEN CARE
Self-Cleaning Cycle
IMPORTANT: The health of some birds is extremely sensitive to
the fumes given off during the Self-Cleaning cycle. Exposure to the
fumes may result in death to certain birds. Always move birds to
another closed and well-ventilated room.
Self-clean the oven before it becomes heavily soiled. Heavy soil
results in longer cleaning and more smoke.
Keep the kitchen well-ventilated during the Self-Cleaning cycle
tohelp get rid of heat, odors, and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle.
Airmust be able to move freely. See the “Oven Vents” section.
Do not clean, rub, damage, or move the oven door gasket.
Thedoor gasket is essential for a good seal.
Prepare Oven:
Remove the broiler pan, grid, cookware and bakeware, and,
onsome models, the temperature probe from the oven.
Remove oven racks to keep them shiny and easy to slide.
Seethe “General Cleaning” section for more information.
Remove any foil from the oven because it may burn or melt,
damaging the oven.
Hand clean inside door edge and the 1
1
/
2
" (3.8 cm) area
around the inside oven cavity frame, being certain not to
move or bend the gasket. This area does not get hot enough
during high-temp self-cleaning to remove soil. Do not let water,
cleaner, etc., enter slots on door frame. Use a damp cloth to
clean this area.
Wipe out any loose soil to reduce smoke and avoid damage.
At high temperatures, foods react with porcelain. Staining,
etching, pitting, or faint white spots can result. This is normal
and will not affect cooking performance.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks, and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
Suggested clean times are 3 hours for light soil, 4 hours for
medium soil, and 5 hours for heavy soil.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp cloth
to the inner door glass before it has completely cooled.
The oven lights will not work during the Self-Cleaning cycle.
NOTE: The oven has a two-speed cooling fan motor. During the
Self-Cleaning cycle, the fan(s) will operate at its highest speed to
increase airow to better exhaust the hotter air through the oven
vent(s). An increase in noise may be noticeable during and after
the Self-Cleaning cycle until the oven cools.
Before Self-Cleaning, make sure the door is closed completely
or it will not lock and the cycle will not begin. When the oven is
locked, the doors of the oven cannot be opened. To avoid damage
to the doors, do not force the doors open when the oven is locked.
1. Touch the Tools keypad.
2. Select the Self Clean icon.
(On double-oven models) Select Upper Cavity or Lower Cavity.
3. Select type of Self-Cleaning:
Steam: 1 hour: Clean up after everyday light spills using lower
heat and 1
1
/
4
cups (295.74 mL) of water.
High temp: 4 hours: 3 hour cycle and 1 hour cooling.
High temp: 5 hours: 4 hour cycle and 1 hour cooling.
High temp: 6 hours: 5 hour cycle and 1 hour cooling.
4. Follow the prompts on the oven display to prepare the oven.
5. Select START to begin the cleaning process.
OR
Select DELAY START to set a delayed Self-Cleaning cycle. See
the “ToDelay Start Self-Cleaning Cycle” Section.
The oven doors will automatically lock.
NOTE: It may take a couple moments for the oven door to
automatically lock after starting the Self-Clean Cycle.
When the self cleaning cycle is complete and the oven cools,
the oven doors will unlock.
6. When the oven is completely cooled, remove ash with a damp
cloth.
To Delay Start Self-Cleaning Cycle:
Follow steps 1 through 4 above, then:
1. Select DELAY START.
2. Select the start time of when the Self-Cleaning cycle should
begin by scrolling from left to right.
3. Select START DELAY.
The oven doors will automatically lock after the Delay Start
countdown.
When the Self-Cleaning cycle is complete and the oven cools,
the oven doors will unlock.
4. When the oven is completely cooled, remove ash with a
dampcloth.
To Stop Self-Cleaning Anytime:
Touch the Oven Cancel Keypad for single oven models, or the
keypads for double oven models. If the oven temperature is too
high, the door will remain locked. It will not unlock until the oven
cools.
WARNING
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
12
Steam Clean
The Steam Clean feature is designed for light oven cavity bottom
cleaning on models that have hidden bake in both ovens.
Allow the oven to cool to room temperature before using the
Steam Clean feature. If your oven cavity is above 200°F (93°C),
the Steam Clean feature will not activate until it cools down.
Remove all racks and accessories from the oven cavity.
For best results, use 10 oz (295.7 mL) of distilled or ltered water.
Do not use oven cleaners.
The Steam Clean feature will take approximately 1 hour. A tone will
sound at the end of the cycle.
IMPORTANT: Because the water in the oven bottom is hot, do not
open the oven door during the Steam Clean cycle.
Touch the Oven Cancel keypad for single oven models and the
Upper/Lower keypads for double oven models at any time to end
the cycle. The display will return to the time of day.
Helpful Hints
Once the Steam Clean cycle is complete and the oven is
completely cooled, remove all remaining water in the bottom
ofthe oven with a sponge or cloth.
Wipe any remaining moisture from the oven door interior, oven
cavity interior sides, and cooktop.
Use a soft brush or nylon scrubber to wipe the oven interior.
This may help with more stubborn stains.
It is recommended to use distilled or ltered water, as tap
water may leave mineral deposits on the oven bottom. Use
acloth soaked with vinegar or lemon juice to remove any
mineral deposits that may be left after the Steam Clean cycle.
If the oven is heavily soiled, use the Self-Cleaning cycle. The
Steam Clean cycle may be used rst to eliminate most of the
debris, resulting in a more effective self-cleaning.
To Steam Clean:
1. Open the oven door of the selected oven and remove all racks
and accessories from the oven cavity.
2. Pour 10 oz (295.7 mL) of distilled or ltered water into the oven
bottom. Then close the oven door.
3. Touch the Tools keypad.
(On double-oven models) Select Upper Cavity or Lower Cavity.
4. Select STEAM CLEAN.
5. Select START.
6. After approximately 1 hour, a tone will sound to signal the end
of the cycle. Touch the keypad for single oven models and the
keypads for double oven models to clear the display.
7. When the oven is completely cooled, remove any excess
waterwith a sponge or cloth and wipe down oven interior.
Ifneeded, use a non-scratch copper scrubbing pad to
removestubborn soils.
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are
off andthe oven is cool. Always follow label instructions on
cleaning products. For additional information, you can visit the
FrequentlyAsked Questions (FAQs) section of our website at
www.whirlpool.com. In Canada, refer to the Customer Service
section at www.whirlpool.ca.
Soap, water, and a soft cloth or sponge are suggested rst unless
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES
(onsomemodels)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire oven is cool. These spills may
affect the nish.
Cleaning Method:
Glass cleaner, mild liquid cleaner or nonabrasive
scrubbingpad:
Gently clean around the model/serial/rating plate
becausescrubbing may remove numbers.
Affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
STAINLESS STEEL (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use
soap-lled scouring pads, abrasive cleaners, steel-wool pads,
gritty washcloths or abrasive paper towels. Damage may occur
tostainless steel surfaces, even with one-time or limited use.
Cleaning Method:
Rub in direction of grain to avoid damaging.
Affresh
®
Stainless Steel Cleaner Part Number W10355016:
See the “Accessories” section for more information.
METALLIC PAINT (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust
removers,ammonia or sodium hydroxide (lye) because
paintsurface may stain.
CONTROL PANEL AND OVEN DOOR EXTERIOR
To avoid damage, do not use abrasive cleaners, steel-wool pads,
gritty washcloths, or abrasive papertowels.
Cleaning Method:
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly
onpanel.
Affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
13
OVEN RACKS
Cleaning Method:
Steel-wool pad.
For racks that have discolored and are harder to slide, a light
coating of vegetable oil applied to the rack guides will help
them slide.
OVEN CAVITY AND OVEN DOOR INTERIOR
Do not use oven cleaners.
Food spills should be cleaned after the oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting, or faint white spots can result.
Cleaning Method:
Self-Cleaning cycle:
See the “Self-Cleaning Cycle” section rst.
For optimal door cleaning results, wipe away any deposits with
a damp sponge before running cycle.
Oven Lights
The oven light(s) are standard 25-watt appliance bulbs.
Beforereplacing, make sure the oven is cool and the controls
areturned off.
To Replace:
1. Disconnect power.
2. Open oven door.
3. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
4. Turn bulb counterclockwise to remove from socket.
5. Replace bulb, and then bulb cover, by turning clockwise.
6. Reconnect power.
TROUBLESHOOTING
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid
aservicecall,refer to the warranty page in this manual or visit producthelp.whirlpool.com. InCanada, visit http://www.whirlpool.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
In Canada:
Whirlpool Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
Problem Possible Causes and/or Solutions
Nothing will operate Household fuse is blown, or a circuit breaker is tripped: Replace the fuse or reset the circuit breaker.
Ifthe problem continues, call an electrician.
Oven will not operate Control Lock is on: “Control Lock” will display on the screen. Scroll up to unlock.
Sabbath Mode is set: See the “Sabbath Mode” section.
On double oven models, one oven is self-cleaning: When one oven is self-cleaning, the other
ovencannot be set or turned on.
Oven temperature
toohighor too low
Oven temperature needs adjustment: See the “Temperature Calibration” section.
Display shows
messages
Power failure: On some models, reset the clock if needed. See “Preferences” in the “Tools” section.
Error code (display shows letter followed by number): Press the oven Cancel keypad to clear the
display. If it reapears, call for service. See the “Warranty” section for contact information.
Demo Mode (product is in Demo Mode): See “To Exit Demo Mode” in the “Tools” section.
Clean cycle did not
workonall spills
Several cooking cycles between Clean cycles or spills on oven walls and doors: Run additional
Cleancycles. The affresh
®
Kitchen and Appliance Cleaner can be used for stubborn soils. See the
“Accessories” and “Self-Cleaning Cycle” sections for more information.
Warm air coming
fromovenvent
Warm air coming from the oven vent is normal. During a self-clean cycle, the air stream is increased.
The cooling fan may operate both during an oven’s cycle and after the cycle has ended, causing warm
airto exit from the oven vent.
Long preheat times Not all cycles require preheating. See cycle instructions for preheat recommendations. Most cycles
preheatto 350°F (177°C) in 12 to 17 minutes. Higher temperatures will take more time. Removing
unusedoven racks prior to preheating can help reduce preheat time.
14
Problem Possible Causes and/or Solutions
Self-Cleaning cycle
willnotoperate
The oven door is open: Close the oven door all the way.
The function has not been entered: See the “Self-Cleaning Cycle” section.
A Timed Self-Clean cycle has been set: See the “Self-Cleaning Cycle” section.
On double oven models, one oven is self-cleaning: When one oven is self-cleaning, the other
ovencannot be set to self-clean.
Oven cooking results
notwhat expected
The set temperature was incorrect: Double-check the recipe in a reliable cookbook.
Oven temperature needs adjustment: See “Temperature Calibration” in the “More Modes”section.
Oven was not preheated: See the “Baking and Roasting” section.
Racks were positioned improperly: See the “Positioning Racks and Bakeware” section.
Not enough air circulation around bakeware: See the “Positioning Racks and Bakeware” section.
Batter distributed unevenly in pan: Check that batter is level in the pan.
Darker browning of food caused by dull or dark bakeware: Lower the oven temperature 25°F (15°C)
ormove rack to a higher position in the oven.
Lighter browning of food caused by shiny or light colored bakeware: Move rack to a lower position
inthe oven.
Incorrect length of cooking time was used: Adjust cooking time.
Oven door was not closed: Be sure that the bakeware does not keep the door from closing.
Oven door was opened during cooking: Oven peeking releases oven heat and can result in longer
cooking times.
Rack is too close to bake burner, making baked items too brown on bottom: Move rack to higher
position in the oven.
Pie crusts browning too quickly: Use aluminum foil to cover the edge of the crust and/or reduce
bakingtemperature.
15
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check the
“Troubleshooting” section. It may save you the cost of a service
call. If you still need help, follow the instructions below.
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
If you need replacement parts
If you need to order replacement parts, we recommend that you
use only FSP
®
replacement parts. FSP
®
replacement parts will
t right and work right because they are made with the same
precision used to build every new Whirlpool
®
appliance.
To locate FSP
®
replacement parts in your area, call us or your
nearest Whirlpool designated service center.
In the U.S.A.
Ifyou have any problems or questions, call Whirlpool Corporation
Connected Appliances at 1-866-333-4591.
Our consultants provide assistance with:
Scheduling of service. Whirlpool appliances designated
service technicians are trained to fulll the product warranty
and provide after-warranty service anywhere in the United
States.
Features and specications on our full line of appliances.
Referrals to local Whirlpool appliance dealers.
Installation information.
Use and maintenance procedures.
Accessory and repair parts sales.
Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.).
Accessories
Affresh
®
Stainless Steel Cleaning Wipes
(stainless steel models)
Order Part Number W10355049
Affresh
®
Stainless Steel Cleaner
(stainless steel models)
Order Part Number W10355016
Affresh
®
Kitchen and Appliance Cleaner
Order Part Number W10355010
Brick Baking Stone
Order Part Number 4378577
Double Built-In Side Trim Kit
Order Part Number W10536161
Premium Broiler Pan and Roasting Rack
Order Part Number W10123240
Porcelain Broiler Pan and Grid
Order Part Number 4396923
Standard Flat Oven Rack
Order Part Number W10317430
Single Built-In Side Trim Kit
Order Part Number W10536160
For further assistance:
If you need further assistance, you can write to Whirlpool with any
questions or concerns at:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
Please include a daytime phone number in your correspondence.
In Canada
Ifyou have any problems or questions, call Whirlpool Corporation
Connected Appliances at 1-866-333-4591.
Our consultants provide assistance with:
Scheduling of service. Whirlpool appliances designated
service technicians are trained to fulll the product warranty
and provide after-warranty service anywhere in Canada.
Features and specications on our full line of appliances.
Referrals to local Whirlpool appliance dealers.
Use and maintenance procedures.
Accessory and repair parts sales.
For further assistance:
If you need further assistance, you can write to Whirlpool with any
questions or concerns at:
Customer eXperience Centre
Whirlpool Canada LP
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
16
11/14
IF YOU NEED SERVICE:
1. Before contacting us to arrange service, please determine whether your product requires repair. Some questions can be addressed without
service. Please take a few minutes to review the Troubleshooting or Problem Solver section of the Use and Care Guide, or visit
www.whirlpool.com/product_help.
2. All warranty service is provided exclusively by our authorized Whirlpool Service Providers. IntheU.S.and Canada, direct all requests for
warranty service to:
Whirlpool Customer eXperience Center
In the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777.
If outside the 50 United States or Canada, contact your authorized Whirlpool dealer to determine whether another warranty applies.
WHIRLPOOL
®
MAJORAPPLIANCE
LIMITEDWARRANTY
ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED
TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you call the
Customer eXperience Center:
Name, address and telephone number
Model number and serial number
A clear, detailed description of the problem
Proof of purchase including dealer or retailer name and address
ONE YEAR LIMITED WARRANTY
WHAT IS COVERED WHAT IS NOT COVERED
For one year from the date of purchase,
when this major appliance is installed,
operated and maintained according to
instructions attached to or furnished
with the product, Whirlpool Corporation
or Whirlpool Canada LP (hereafter
“Whirlpool”) will pay for Factory
Specied Replacement Parts and repair
labor to correct defects in materials or
workmanship that existed when this
major appliance was purchased, or at
its sole discretion replace the product.
In the event of product replacement,
your appliance will be warranted for
the remaining term of the original unit’s
warranty period.
YOUR SOLE AND EXCLUSIVE
REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE PRODUCT
REPAIR AS PROVIDED HEREIN.
Service must be provided by a
Whirlpool designated service company.
This limited warranty is valid only in
the United States or Canada and
applies only when the major appliance
is used in the country in which it was
purchased. This limited warranty is
effective from the date of original
consumer purchase. Proof of original
purchase date is required to obtain
service under this limited warranty.
1. Commercial, non-residential, multiple-family use, or use inconsistent with published user, operator or
installation instructions.
2. In-home instruction on how to use your product.
3. Service to correct improper product maintenance or installation, installation not in accordance with
electrical or plumbing codes or correction of household electrical or plumbing (i.e. house wiring, fuses
or water inlet hoses).
4. Consumable parts (i.e. light bulbs, batteries, air or water lters, preservation solutions, etc.).
5. Defects or damage caused by the use of non-genuine Whirlpool parts or accessories.
6. Conversion of products from natural gas or propane gas.
7. Damage from accident, misuse, abuse, re, oods, acts of God or use with products not approved by
Whirlpool.
8. Repairs to parts or systems to correct product damage or defects caused by unauthorized service,
alteration or modication of the appliance.
9. Cosmetic damage including scratches, dents, chips, and other damage to the appliance nishes
unless such damage results from defects in materials and workmanship and is reported to Whirlpool
within 30 days.
10. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive environments including
but not limited to high salt concentrations, high moisture or humidity or exposure to chemicals.
11. Food or medicine loss due to product failure.
12. Pick-up or delivery. This product is intended for in-home repair.
13. Travel or transportation expenses for service in remote locations where an authorized Whirlpool
servicer is not available.
14. Removal or reinstallation of inaccessible appliances or built-in xtures (i.e. trim, decorative panels,
ooring, cabinetry, islands, countertops, drywall, etc.) that interfere with servicing, removal or
replacement of the product.
15. Service or parts for appliances with original model/serial numbers removed, altered or not easily
determined.
The cost of repair or replacement under these excluded circumstances shall be borne by
thecustomer.
DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow
limitations on the duration of implied warranties of merchantability or tness, so this limitation may not apply to you. This warranty gives you specic
legal rights, and you also may have other rights that vary from state to state or province to province.
DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY
Whirlpool makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations
contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance, you
should ask Whirlpool or your retailer about buying an extended warranty.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. WHIRLPOOL
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation of
incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specic legal rights, and you
also may have other rights that vary from state to state or province to province.
17
MERCI d’avoir acheté ce produit de grande qualité. Enregistrez la cuisinière sur www.whirlpool.ca.
Pour référence ultérieure, consignez par écrit les numéros de modèle et de série de votre produit. Ceux-ci se trouvent sur le côté
droit sous le tableau de commande.
Numéro de modèle ______________________________________ Numéro de série _________________________________________
Table des matières
FOUR ÉLECTRIQUE SIMPLE ET
DOUBLE, ENCASTRÉ
INSTRUCTIONS D'UTILISATION
SÉCURITÉ DU FOUR ...................................................................18
UTILISATION DU FOUR ...............................................................19
Guide des caractéristiques ........................................................19
Panneau tactile ...........................................................................20
Afchage ....................................................................................20
Méthodes de cuisson .................................................................20
Afchage du menu .....................................................................20
Mode de paramétrage et de démonstration..............................20
Favoris ........................................................................................22
Cuisson assistée ........................................................................22
Outils ..........................................................................................23
Plus de modes ...........................................................................24
Papier d’aluminium ....................................................................25
Positionnement des grilles et des ustensiles
de cuisson au four ......................................................................26
Évent(s) du four ..........................................................................27
Préchauffage et température du four .........................................27
Cuisson au four et rôtissage ......................................................28
Cuisson au gril ............................................................................28
ENTRETIEN DU FOUR .................................................................29
Programme d’autonettoyage .....................................................29
Nettoyage à la vapeur ................................................................30
Nettoyage général ......................................................................30
Lampes du four ..........................................................................31
DÉPANNAGE .................................................................................31
ASSISTANCE OU SERVICE .........................................................33
Aux É.-U. ....................................................................................33
Accessoires ................................................................................33
Au Canada ..................................................................................33
GARANTIE .....................................................................................34
18
SÉCURITÉ DU FOUR
Risque possible de décès ou de blessure grave si
Risque possible de décès ou de blessure grave
si vous ne suivez pas les instructions.
Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de
Votre sécurité et celle des autres est très importante.
Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager.
Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves
Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou
“AVERTISSEMENT”. Ces mots signifient :
DANGER
AVERTISSEMENT
Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer.
à vous et à d’autres.
Voici le symbole d’alerte de sécurité.
vous ne suivez pas immédiatement les instructions.
blessure et ce qui peut se produire en cas de non-respect des instructions.
CONSERVER CES INSTRUCTIONS
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
AVERTISSEMENT : Afin de réduire le risque d’incendie, de choc
électrique ou de blessures corporelles lors de l’utilisation du four, il
convient d’observer certaines précautions fondamentales, notamment :
Installation correcte – S’assurer que le four est bien installé et que la
mise à la terre est réalisée par un technicien qualifié.
Ne jamais utiliser le four pour chauffer ou réchauffer la pièce.
Ne pas laisser les enfants seuls – Les enfants ne doivent pas être
laissés seuls ou sans surveillance dans la zone où le four est utilisé.
Ils ne doivent jamais être autorisés à s’asseoir ou à se tenir debout
sur une partie quelconque du four.
Porter des vêtements adaptés – Les vêtements pendants ou non
ajustés ne doivent jamais être portés lorsqu’on utilise le four.
Entretien par l’utilisateur – Ne pas réparer ou remplacer une
quelconque pièce du four sans recommandation spécifique du
manuel. Toutes les autres tâches d’entretien doivent être effectuées
par un technicien qualifié.
Entreposage dans le four – Les matières inflammables ne doivent
pas être entreposées dans le four.
Ne pas utiliser d’eau sur les feux de friture – Étouffer le feu ou la
flamme ou utiliser un extincteur avec agent chimique sec ou
mousseux.
Utiliser uniquement des mitaines sèches – Les mitaines humides ou
trempées sur les surfaces chaudes peuvent provoquer des brûlures
dues à la vapeur. Ne pas laisser les mitaines toucher des éléments
chauffants et chauds. Ne pas utiliser un chiffon ou tout autre tissu
encombrant.
Ouvrir la porte lentement – Laisser la chaleur ou la vapeur
s’échapper avant de retirer ou de remettre en place un plat.
Ne pas faire chauffer un contenant qui n’a pas été ouvert –
L’accumulation de pression pourrait faire éclater le contenant et
causer des blessures.
Garder dégagés les conduits de ventilation du four.
Position des grilles du four – toujours placer les grilles à la
position souhaitée lorsque le four est froid. Si une grille doit
être déplacée pendant que le four est chaud, ne pas laisser la
poignée entrer en contact avec l’élément chaud du four.
NE PAS TOUCHER LES ÉLÉMENTS CHAUFFANTS OU LES
SURFACES INTÉRIEURES DU FOUR – Les éléments
chauffants peuvent être chauds même s’ils sont de couleur
foncée. Les surfaces intérieures du four peuvent être
suffisamment chaudes pour provoquer des brûlures. Pendant et
après l’utilisation, ne pas toucher ou laisser des vêtements ou
d’autres matériaux inflammables en contact avec les éléments
chauffants ou les surfaces intérieures tant qu’ils n’ont pas
suffisamment refroidi. Les autres surfaces du four peuvent
devenir suffisamment chaudes pour causer des brûlures – les
ouvertures de ventilation et les surfaces autour de ces
ouvertures, les portes du four et les hublots de portes font
partie de ces surfaces.
Pour les fours autonettoyants :
Ne pas nettoyer le joint – Le joint est essentiel pour une bonne
étanchéité. Faire attention à ne pas frotter, endommager ou
déplacer le joint.
Ne pas utiliser de nettoyants à four – Aucun nettoyant
commercial ou revêtement de protection pour four d’aucune
sorte ne devrait être utilisé dans le four ou près de ses parties.
Ne nettoyer que les pièces indiquées dans le manuel.
Avant de mettre en marche l’autonettoyage – Enlever la
lèchefrite et les autres ustensiles.
Pour les cuisinières et fours intelligents :
Utilisation à distance – Cet appareil peut être configuré pour
permettre l’utilisation à distance en tout temps. Ne pas ranger
de matériaux inflammables ou sensibles à la température sur le
dessus ou près de la surface de l’appareil.
Avertissements de la Proposition 65 de l'État de la Californie:
AVERTISSEMENT: Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
cancers.
AVERTISSEMENT: Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
malformations et autres déficiences de naissance.
19
SÉCURITÉ DU FOUR
Risque possible de décès ou de blessure grave si
Risque possible de décès ou de blessure grave
si vous ne suivez pas les instructions.
Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de
Votre sécurité et celle des autres est très importante.
Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager.
Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves
Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou
“AVERTISSEMENT”. Ces mots signifient :
DANGER
AVERTISSEMENT
Assurez-vous de toujours lire tous les messages de sécurité et de vous y conformer.
à vous et à d’autres.
Voici le symbole d’alerte de sécurité.
vous ne suivez pas immédiatement les instructions.
blessure et ce qui peut se produire en cas de non-respect des instructions.
CONSERVER CES INSTRUCTIONS
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
AVERTISSEMENT : Afin de réduire le risque d’incendie, de choc
électrique ou de blessures corporelles lors de l’utilisation du four, il
convient d’observer certaines précautions fondamentales, notamment :
Installation correcte – S’assurer que le four est bien installé et que la
mise à la terre est réalisée par un technicien qualifié.
Ne jamais utiliser le four pour chauffer ou réchauffer la pièce.
Ne pas laisser les enfants seuls – Les enfants ne doivent pas être
laissés seuls ou sans surveillance dans la zone où le four est utilisé.
Ils ne doivent jamais être autorisés à s’asseoir ou à se tenir debout
sur une partie quelconque du four.
Porter des vêtements adaptés – Les vêtements pendants ou non
ajustés ne doivent jamais être portés lorsqu’on utilise le four.
Entretien par l’utilisateur – Ne pas réparer ou remplacer une
quelconque pièce du four sans recommandation spécifique du
manuel. Toutes les autres tâches d’entretien doivent être effectuées
par un technicien qualifié.
Entreposage dans le four – Les matières inflammables ne doivent
pas être entreposées dans le four.
Ne pas utiliser d’eau sur les feux de friture – Étouffer le feu ou la
flamme ou utiliser un extincteur avec agent chimique sec ou
mousseux.
Utiliser uniquement des mitaines sèches – Les mitaines humides ou
trempées sur les surfaces chaudes peuvent provoquer des brûlures
dues à la vapeur. Ne pas laisser les mitaines toucher des éléments
chauffants et chauds. Ne pas utiliser un chiffon ou tout autre tissu
encombrant.
Ouvrir la porte lentement – Laisser la chaleur ou la vapeur
s’échapper avant de retirer ou de remettre en place un plat.
Ne pas faire chauffer un contenant qui n’a pas été ouvert –
L’accumulation de pression pourrait faire éclater le contenant et
causer des blessures.
Garder dégagés les conduits de ventilation du four.
Position des grilles du four – toujours placer les grilles à la
position souhaitée lorsque le four est froid. Si une grille doit
être déplacée pendant que le four est chaud, ne pas laisser la
poignée entrer en contact avec l’élément chaud du four.
NE PAS TOUCHER LES ÉLÉMENTS CHAUFFANTS OU LES
SURFACES INTÉRIEURES DU FOUR – Les éléments
chauffants peuvent être chauds même s’ils sont de couleur
foncée. Les surfaces intérieures du four peuvent être
suffisamment chaudes pour provoquer des brûlures. Pendant et
après l’utilisation, ne pas toucher ou laisser des vêtements ou
d’autres matériaux inflammables en contact avec les éléments
chauffants ou les surfaces intérieures tant qu’ils n’ont pas
suffisamment refroidi. Les autres surfaces du four peuvent
devenir suffisamment chaudes pour causer des brûlures – les
ouvertures de ventilation et les surfaces autour de ces
ouvertures, les portes du four et les hublots de portes font
partie de ces surfaces.
Pour les fours autonettoyants :
Ne pas nettoyer le joint – Le joint est essentiel pour une bonne
étanchéité. Faire attention à ne pas frotter, endommager ou
déplacer le joint.
Ne pas utiliser de nettoyants à four – Aucun nettoyant
commercial ou revêtement de protection pour four d’aucune
sorte ne devrait être utilisé dans le four ou près de ses parties.
Ne nettoyer que les pièces indiquées dans le manuel.
Avant de mettre en marche l’autonettoyage – Enlever la
lèchefrite et les autres ustensiles.
Pour les cuisinières et fours intelligents :
Utilisation à distance – Cet appareil peut être configuré pour
permettre l’utilisation à distance en tout temps. Ne pas ranger
de matériaux inflammables ou sensibles à la température sur le
dessus ou près de la surface de l’appareil.
Avertissements de la Proposition 65 de l'État de la Californie:
AVERTISSEMENT: Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
cancers.
AVERTISSEMENT: Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
malformations et autres déficiences de naissance.
Guide des caractéristiques
Ce manuel concerne plusieurs modèles. Le modèle que vous avez peut comporter toutes les caractéristiques énumérées ou seulement
certaines d’entre elles. Se reporter à ce manuel ou à la section Foire Aux Questions (FAQ) de notre site Web sur www.whirlpool.com pour
des instructions plus détaillées. Au Canada, consulter la section service à la clientèle à www.whirlpool.ca.
Four simple
Four double
Clavier Fonction Instructions
Outils Fonction
d’utilisation du
four
Permet de personnaliser les signaux sonores et le fonctionnement du four selon les
préférences de l’utilisateur. Voir les sections “Outils” et “Plus de modes”.
Accueil Écran Home
(Accueil)
En appuyant une fois, l’utilisateur peut accéder à l’écran des méthodes de cuisson et de la
cuisson assistée. L’heure est afchée en appuyant deux fois.
Favoris Favoris Le clavier des favoris permet à l’utilisateur de sauvegarder les programmes qu’il utilise le plus
souvent.
Lampe du four Lampe de la
cavité du four
La lampe du four est commandée par une touche située sur le tableau de commande du four.
Alors que la porte du four est fermée, appuyer sur la touche lampe du four\) pour allumer ou
éteindre la lampe. La lampe du four s’allume automatiquement à l’ouverture de la porte.
Alimentation
(fours simples
seulement)
Fonction
d’alimentation
La touche d’alimentation met en marche les fonctions du four et le réveille lorsqu’il est en
mode de veille.
Annulation
de la fonction
d'alimentation
(fours simples
seulement)
Annulation
de la fonction
d’alimentation
La touche annulation du four désactive toutes les fonctions du four à l’exception de l’horloge,
de la minuterie et du verrouillage des commandes du four sélectionné.
Supérieur/Inférieur
(fours doubles
seulement)
Alimentation/
Annulation
de la fonction
d’alimentation
du four
Les touches supérieur et inférieur mettent sous tension le four sélectionné et le réveillent
lorsqu'il est en mode de veille.
Si le four sélectionné est déjà allumé (On), la touche supérieur ou inférieur désactive toutes les
fonctions du four à l’exception de l’horloge, de la minuterie et du verrouillage des commandes
du four sélectionné.
OVEN
UPPER/LOWER
UTILISATION DU FOUR
20
Panneau tactile
Le panneau tactile regroupe le menu de commande et les
commandes des différentes fonctions. Le panneau tactile est très
sensible, il suft d’un léger toucher pour l’activer. Naviguer vers
le haut, le bas, la gauche ou la droite pour explorer les différentes
options et fonctions.
Pour plus d’information sur chaque commande, voir leurs sections
respectives dans ce manuel.
Afchage
L’afchage est pour le menu et les commandes de fonctionnement
du four. L’écran tactile permet de faire déler les menus du four.
L’afchage est très sensible ; il suft d’un léger toucher pour
l’activer et sélectionner les commandes.
Lorsque le four est utilisé, l’afchage indique l’horloge, le mode, la
température du four, la minuterie de cuisine, et la minuterie du four
si réglée. Si la minuterie du four n’est pas réglée, on peut la régler
à partir de cet écran.
Après environ 2 minutes d’inactivité, l’afchage passe au mode
de veille et l’afchage s’assombrit. Lorsque le four fonctionne,
l’afchage reste lumineux.
Au cours de l’utilisation, l’afchage indique les menus et les
sélections appropriées pour les options choisies.
Afchage du menu
Si le four est éteint, appuyer sur la touche alimentation du four ou
supérieur/inférieur du four désiré pour activer le menu. À partir de
cet écran, tous les programmes de cuisson automatique peuvent
être activés; tous les programmes de cuisson manuels peuvent
être réglés; les options peuvent être ajustées et les instructions,
les directives de préparation et les conseils sont accessibles.
Méthode de
cuisson
Fonction Instructions
BAKE
(cuisson au
four)
Cuisson
au four et
rôtissage
1. Appuyer sur la touche alimentation du four ou supérieur/inférieur pour le four désiré.
2. Sélectionner COOKING METHODS (méthodes de cuisson).
3. Sélectionner BAKE (cuisson).
4. Sélectionner la température de CUISSON souhaitée en naviguant vers la gauche et la droite ou
manuellement à l’aide de la grille située dans le coin supérieur droit pour saisir la température de
cuisson à l’aide du clavier.
5. Appuyer sur START (démarrer) pour commencer le préchauffage. Une tonalité se fait entendre une fois
le préchauffage terminé.
OPTIONELLE: Consulter la section “Préchauffage rapide” pour obtenir plus d’information sur le
préchauffage rapide du four.
6. Appuyer sur la touche annulation de la fonction d'alimentation du four ou supérieur/inférieur pour le
four désiré lorsque le tout est terminé.
Méthodes de cuisson
AVERTISSEMENT
Risque d'empoisonnement alimentaire
Ne pas laisser des aliments dans un four plus d'une
heure avant ou après la cuisson.
Le non-respect de cette instruction peut causer un
empoisonnement alimentaire ou une maladie.
Mode de paramétrage et de
démonstration
1. Sélectionner STORE DEMO MODE (mode de démonstration
en magasin) pour activer ce mode.
OU
1. Sélectionner NEXT (suivant) pour utiliser le produit.
2. Suivre les instructions à l’écran pour sélectionner une langue,
congurer Wi-Fi/connexion au réseau, accepter les modalités
et régler l’heure.
REMARQUE: L’écran afche l’heure et la date (écran par
défaut/mode Veille).
3. Sélectionner TRY THE PRODUCT (essayer le produit) pour
découvrir diverses caractéristiques et options du produit.
FACULTATIF: Sélectionner VIEW PRODUCT VIDEOS (afcher
les vidéos du produit) pour afcher une vidéo sur la façon
de naviguer et d’interagir avec le produit et d’explorer Voice
Control (commande vocale).
4. Faire déler l’écran et sélectionner EXPLORE (explorer).
5. Sélectionner la touche outils.
Pour quitter le mode Demo (démonstration), voir la
section“Outils”.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Whirlpool WOS51EC0HW Mode d'emploi

Catégorie
Cuisinières
Taper
Mode d'emploi