AEG IEB64000XB Manuel utilisateur

USER

MANUAL

EN User Manual 2

Hob

FR Notice d'utilisation 20

Table de cuisson

DE Benutzerinformation 41

Kochfeld

IEB64000XB

CONTENTS

1. SAFETY INFORMATION......................................................................................2

2. SAFETY INSTRUCTIONS.................................................................................... 4

3. INSTALLATION.....................................................................................................7

4. PRODUCT DESCRIPTION...................................................................................8

5. DAILY USE......................................................................................................... 10

6. HINTS AND TIPS................................................................................................14

7. CARE AND CLEANING...................................................................................... 16

8. TROUBLESHOOTING........................................................................................16

9. TECHNICAL DATA............................................................................................. 18

10. ENERGY EFFICIENCY.....................................................................................19

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler – features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website to:

Get usage advice, brochures, trouble shooter, service and repair information:

www.aeg.com/support

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible for any injuries or damages that are the

result of incorrect installation or usage. Always keep the

www.aeg.com2

instructions in a safe and accessible location for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Children between 3 and 8 years of age and persons

with very extensive and complex disabilities shall be

kept away unless continuously supervised.

• Children of less than 3 years of age should be kept

away unless continuously supervised.

• Do not let children play with the appliance.

• Keep all packaging away from children and dispose of

it appropriately.

• Keep children and pets away from the appliance when

it operates or when it cools down. Accessible parts are

hot.

• If the appliance has a child safety device, it should be

activated.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

• WARNING: The appliance and its accessible parts

become hot during use. Care should be taken to avoid

touching heating elements.

• Do not operate the appliance by means of an external

timer or separate remote-control system.

• WARNING: Unattended cooking on a hob with fat or

oil can be dangerous and may result in fire.

• NEVER try to extinguish a fire with water, but switch

off the appliance and then cover flame e.g. with a lid

or a fire blanket.

ENGLISH 3

• CAUTION: The cooking process has to be supervised.

A short term cooking process has to be supervised

continuously.

• WARNING: Danger of fire: Do not store items on the

cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control and

do not rely on the pan detector.

• If the glass ceramic surface / glass surface is cracked,

switch off the appliance and unplug it from the mains.

In case the appliance is connected to the mains

directly using junction box, remove the fuse to

disconnect the appliance from power supply. In either

case contact the Authorised Service Centre.

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

• WARNING: Use only hob guards designed by the

manufacturer of the cooking appliance or indicated by

the manufacturer of the appliance in the instructions

for use as suitable or hob guards incorporated in the

appliance. The use of inappropriate guards can cause

accidents.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

WARNING!

Risk of injury or damage to

the appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Follow the installation instructions

supplied with the appliance.

• Keep the minimum distance from

other appliances and units.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware falling from the

www.aeg.com4

appliance when the door or the

window is opened.

• Each appliance has cooling fans on

the bottom.

• If the appliance is installed above a

drawer:

– Do not store any small pieces or

sheets of paper that could be

pulled in, as they can damage the

cooling fans or impair the cooling

system.

– Keep a distance of minimum 2 cm

between the bottom of the

appliance and parts stored in the

drawer.

2.2 Electrical Connection

WARNING!

Risk of fire and electric

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before connecting the hob to an oven

and before every wiring make sure

the main terminals of both appliances

are not live.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Use the correct electricity mains

cable.

• Do not let the electricity mains cable

tangle.

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the

cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug (if applicable) or to the

mains cable. Contact our Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

2.3 Use

WARNING!

Risk of injury, burns and

electric shock.

• Remove all the packaging, labelling

and protective film (if applicable)

before first use.

• Use this appliance in a household

environment.

• Do not change the specification of this

appliance.

• Make sure that the ventilation

openings are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after

each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with wet

hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

ENGLISH 5

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it

may splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and

oils when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

WARNING!

Risk of damage to the

appliance.

• Do not keep hot cookware on the

control panel.

• Do not put a hot pan cover on the

glass surface of the hob.

• Do not let cookware to boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones

with empty cookware or without

cookware.

• Do not put aluminium foil on the

appliance.

• Cookware made of cast iron,

aluminium or with a damaged bottom

can cause scratches on the glass /

glass ceramic. Always lift these

objects up when you have to move

them on the cooking surface.

• This appliance is for cooking

purposes only. It must not be used for

other purposes, for example room

heating.

2.4 Care and cleaning

• Clean the appliance regularly to

prevent the deterioration of the

surface material.

• Deactivate the appliance and let it

cool down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use any abrasive products,

abrasive cleaning pads, solvents or

metal objects.

2.5 Service

• To repair the appliance contact the

Authorised Service Centre. Use

original spare parts only.

• Concerning the lamp(s) inside this

product and spare part lamps sold

separately: These lamps are intended

to withstand extreme physical

conditions in household appliances,

such as temperature, vibration,

humidity, or are intended to signal

information about the operational

status of the appliance. They are not

intended to be used in other

applications and are not suitable for

household room illumination.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains electrical cable

close to the appliance and dispose of

it.

www.aeg.com6

3. INSTALLATION

WARNING!

Refer to Safety chapters.

3.1 Hob and oven connection

type

This appliance has a yellow 1x14 pole

connector and can be connected to an

oven with a yellow 1x14 pole connector.

3.2 Before the installation

Before you install the hob, write down the

information bellow from the rating plate.

The rating plate is on the bottom of the

hob.

Serial number ...........................

3.3 Built-in hobs

First install the oven then the hob in its

cutout.

Only use the built-in hobs after you

assemble the hob into correct built-in

units and work surfaces that align to the

standards.

3.4 Assembly

min.

50mm

min.

500mm

R 5mm

min.

55mm

560

+1

mm

490

+1

mm

min.

28 mm

min. 60mm

ENGLISH 7

If the appliance is installed

above a drawer, the hob

ventilation can warm up the

items stored in the drawer

during the cooking process.

4. PRODUCT DESCRIPTION

4.1 Cooking surface layout

180 mm

210 mm

180 mm145 mm

11

1 1

2

1

Induction cooking zone

2

Control panel

4.2 Control panel layout

321

4

8

9

5

7

6

Use the sensor fields to operate the appliance. The displays, indicators and sounds

tell which functions operate.

Sen‐

sor

field

Function Comment

1

- Heat setting display To show the heat setting.

2

- Timer indicators of cooking

zones

To show for which zone you set the time.

3

- Timer display To show the time in minutes.

www.aeg.com8

Sen‐

sor

field

Function Comment

4

- To select the cooking zone.

5

/

- To increase or decrease the time.

6

Hob²Hood To activate and deactivate the manual

mode of the function.

7

Lock / Child Safety Device To lock / unlock the control panel.

8

Pause To activate and deactivate the function.

9

PowerBoost To activate the function.

4.3 Heat setting displays

Display Description

The cooking zone is deactivated.

-

The cooking zone operates.

Pause operates.

Automatic Heat Up operates.

PowerBoost operates.

+ digit

There is a malfunction.

/ /

OptiHeat Control (3 step Residual heat indicator): continue cooking /

keep warm / residual heat.

Lock / Child Safety Device operates.

Incorrect or too small cookware or no cookware on the cooking zone.

Automatic Switch Off operates.

ENGLISH 9

4.4 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / There is a risk of

burns from residual heat.

The indicator shows the

level of the residual heat.

The induction cooking zones make the

heat necessary for cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat

of the cookware.

5. DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Operating the hob

You operate the hob with the knobs of

the oven and control panel of the hob.

The "Daily use" chapter for the oven tells

how to operate the hob.

5.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after

you activate the hob,

• you spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• the hob gets too hot (e.g. when a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• you use incorrect cookware. The

symbol

comes on and the cooking

zone deactivates automatically after 2

minutes.

• you do not deactivate a cooking zone

or change the heat setting. After some

time comes on and the hob

deactivates.

The relation between the heat setting

and the time after which the hob

deactivates:

Heat setting The hob deacti‐

vates after

, 1 - 2

6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hour

5.3 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: turn the knob clockwise until

comes on. Immediately set the correct

heat setting. After 3 seconds comes

on.

To deactivate the function: turn the

knob counterclockwise.

5.4 PowerBoost

This function makes more power

available to the induction cooking zones.

The function can be activated for the

induction cooking zone only for a limited

period of time. After this time the

induction cooking zone automatically

sets back to the highest heat setting.

Refer to “Technical data”

chapter.

www.aeg.com10

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

5.5 Timer

Count Down Timer

You can use this function to set how long

the cooking zone should operate for a

single cooking session.

First set the heat setting for the cooking

zone then set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of

the timer to set the time (00 - 99

minutes). When the indicator of the

cooking zone starts to flash slowly the

time counts down.

To see the remaining time: set the

cooking zone with . The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To change the time: set the cooking

zone with . Touch or .

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

To deactivate the function you can also

touch and at the same time.

When the time comes to an

end, the sound operates and

00 flashes. The cooking

zone deactivates.

To stop the sound: touch .

CountUp Timer (The count up timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of

the timer. comes on. When the

indicator of the cooking zone starts to

flash slowly the time counts up. The

display switches between and

counted time (minutes).

To see how long the cooking zone

operates: set the cooking zone with .

The indicator of the cooking zone starts

to flash quickly. The display shows how

long the zone operates.

To deactivate the function: set the

cooking zone with

and touch or

. The indicator of the cooking zone

goes out.

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and

the cooking zones do not operate. The

heat setting display shows .

To activate the function: touch

.

Touch or of the timer to set the

time. Cooking zones display deactivates

automatically after 10 seconds. When

the time comes to an end, the sound

operates and 00 flashes.

To stop the sound: touch .

To deactivate the function: activate for

a short time and deactivate left front

cooking zone.

The function has no effect

on the operation of the

cooking zones.

5.6 Pause

This function sets all cooking zones that

operate to the lowest heat setting.

The function does not stop the timer

functions.

Touch

to activate the function.

comes on. The heat setting is lowered

to 1.

To deactivate the function, touch

. The

previous heat setting comes on.

If you change the heat

setting, the function stops

and the display shows the

new heat setting.

ENGLISH 11

5.7 Lock

You can lock the sensors on the hob

while cooking zones operate.

Set the heat setting first.

To activate the function: touch

.

comes on for 4 seconds. The Timer stays

on.

To deactivate the function: touch .

The previous heat setting comes on.

When you deactivate the

hob, you also deactivate this

function.

5.8 Child Safety Device

This function prevents an accidental

operation of the hob.

To activate the function: the hob must

be deactivated. Touch for 4 seconds

until flashes. Touch . comes on

for 4 seconds.

To deactivate the function: the hob

must be deactivated. Touch for 4

seconds until

flashes. Touch .

comes on for 4 seconds.

To override the function for only one

cooking time: activate a cooking zone.

comes on. Touch for 4 seconds

until

comes on for all zones. Set the

heat setting in 4 seconds. You can

operate the hob. When you deactivate

the appliance the function operates

again.

5.9 OffSound Control

(Deactivation and activation

of the sounds)

Deactivate the hob. Touch for 3

seconds. Touch for 3 seconds. or

comes on. Touch of the timer to

choose one of the following:

•

- the sounds are off

• - the sounds are on.

To confirm your selection wait until the

hob deactivates automatically.

When the function is set to you can

hear the sounds only when:

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control

panel.

5.10 Power management

• All cooking zones are connected to

one phase. See the illustration.

• The phase has a maximum electricity

loading of 3700 W.

• The function divides the power

between cooking zones.

• The function activates when the total

electricity loading of the cooking

zones exceeds 3700 W.

• The function decreases the power to

the other cooking zones.

• The heat setting display of the

reduced zones alternates between the

chosen heat setting and the reduced

heat setting. After some time the heat

setting display of the reduced zones

stays on the reduced heat setting.

5.11 Hob²Hood

It is an advanced automatic function

which connects the hob to a special

hood. Both the hob and the hood have

an infrared signal communicator. Speed

of the fan is defined automatically on

basis of mode setting and temperature of

the hottest cookware on the hob. You

can also operate the fan from the hob

manually.

www.aeg.com12

For most of the hoods the

remote system is originally

deactivated. Activate it

before you use the function.

For more information refer to

hood user manual.

Operating the function automatically

To operate the function automatically set

the automatic mode to H1 – H6. The hob

is originally set to H5. The hood reacts

whenever you operate the hob. The hob

recognizes temperature of the cookware

automatically and adjusts the speed of

the fan.

Automatic modes

Auto‐

matic

light

Boil‐

ing

1)

Frying

2)

Mode H0 Off Off Off

Mode H1 On Off Off

Mode

H2

3)

On Fan

speed 1

Fan

speed 1

Mode H3 On Off Fan

speed 1

Mode H4 On Fan

speed 1

Fan

speed 1

Mode H5 On Fan

speed 1

Fan

speed 2

Mode H6 On Fan

speed 2

Fan

speed 3

1)

The hob detects the boiling process and acti‐

vates fan speed in accordance with automatic

mode.

2)

The hob detects the frying process and acti‐

vates fan speed in accordance with automatic

mode.

3)

This mode activates the fan and the light and

does not rely on the temperature.

Changing the automatic mode

1. Deactivate the appliance.

2. Touch for 3 seconds until you

hear a beep.

3. Touch for 3 seconds until or

comes on.

4. Touch until H and a digit (0 - 6)

comes on. H5 is the default setting.

5. Touch of the Timer to select the

desired mode (H0 - H6). The chosen

mode activates automatically after 10

seconds.

To operate the hood directly

on the hood panel deactivate

the automatic mode of the

function.

When you finish cooking and

deactivate the hob, the hood

fan may still operate for a

certain period of time. After

that time the system

deactivates the fan

automatically and prevents

you from accidental

activation of the fan for the

next 30 seconds.

Operating the fan speed manually

You can also operate the function

manually. To do that touch when the

hob is active. This deactivates automatic

operation of the function and allows you

to change the fan speed manually. When

you press you raise the fan speed by

one. When you reach an intensive level

and press again you will set fan speed

to 0 which deactivates the hood fan. To

start the fan again with fan speed 1 touch

.

To activate automatic

operation of the function,

deactivate the hob and

activate it again.

Activating the light

You can set the hob to activate the light

automatically whenever you activate the

hob. To do so set the automatic mode to

H1 – H6.

The light on the hood

deactivates 2 minutes after

deactivating the hob.

ENGLISH 13

6. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

6.1 Cookware

For induction cooking zones

a strong electro-magnetic

field creates the heat in the

cookware very quickly.

Use the induction cooking

zones with suitable

cookware.

Cookware material

• correct: cast iron, steel, enamelled

steel, stainless steel, multi-layer

bottom (with a correct marking from a

manufacturer).

• not correct: aluminium, copper,

brass, glass, ceramic, porcelain.

Cookware is suitable for an induction

hob if:

• water boils very quickly on a zone set

to the highest heat setting.

• a magnet pulls on to the bottom of the

cookware.

The bottom of the cookware

must be as thick and flat as

possible.

Ensure pan bases are clean

and dry before placing on

the hob surface.

Cookware dimensions

Induction cooking zones adapt to the

dimension of the bottom of the cookware

automatically.

The cooking zone efficiency is related to

the diameter of the cookware. The

cookware with a diameter smaller than

the minimum receives only a part of the

power generated by the cooking zone.

Refer to "Technical data".

6.2 The noises during

operation

If you can hear:

• crack noise: cookware is made of

different materials (sandwich

construction).

• whistle sound: you use the cooking

zone with high power level and the

cookware is made of different

materials (sandwich construction).

• humming: you use high power level.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not

refer to hob malfunction.

6.3 Öko Timer (Eco Timer)

To save energy, the heater of the

cooking zone deactivates before the

count down timer sounds. The difference

in the operation time depends on the

heat setting level and the length of the

cooking operation.

6.4 Examples of cooking

applications

The correlation between the heat setting

of a zone and its consumption of power

is not linear. When you increase the heat

setting, it is not proportional to the

increase of the consumption of power. It

means that a cooking zone with the

medium heat setting uses less than a

half of its power.

The data in the table is for

guidance only.

www.aeg.com14

Heat setting Use to: Time

(min)

Hints

- 1

Keep cooked food warm. as nec‐

essary

Put a lid on the cookware.

1 - 2 Hollandaise sauce, melt: but‐

ter, chocolate, gelatine.

5 - 25 Mix from time to time.

1 - 2 Solidify: fluffy omelettes, baked

eggs.

10 - 40 Cook with a lid on.

2 - 3 Simmer rice and milkbased

dishes, heat up ready-cooked

meals.

25 - 50 Add at least twice as much liq‐

uid as rice, mix milk dishes

halfway through the proce‐

dure.

3 - 4 Steam vegetables, fish, meat. 20 - 45 Add a couple of tablespoons

of liquid.

4 - 5 Steam potatoes. 20 - 60 Use max. ¼ l of water for 750

g of potatoes.

4 - 5 Cook larger quantities of food,

stews and soups.

60 - 150 Up to 3 l of liquid plus ingredi‐

ents.

6 - 7 Gentle fry: escalope, veal cor‐

don bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts.

as nec‐

essary

Turn halfway through.

7 - 8 Heavy fry, hash browns, loin

steaks, steaks.

5 - 15 Turn halfway through.

9 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.

Boil large quantities of water. PowerBoost is activated.

6.5 Hints and Tips for

Hob²Hood

When you operate the hob with the

function:

• Protect the hood panel from direct

sunlight.

• Do not spot halogen light on the hood

panel.

• Do not cover the hob control panel.

• Do not interrupt the signal between

the hob and the hood (for example

with a hand or a cookware handle).

See the picture.

The hood in the picture is only

exemplary.

ENGLISH 15

Other remotely controlled

appliances may block the

signal. Do not use any

remotely controlled

appliances at the time when

you use the function on the

hob.

Cooker hoods with the Hob²Hood

function

To find the full range of cooker hoods

which work with this function refer to our

consumer website. The AEG cooker

hoods that work with this function must

have the symbol .

7. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

7.1 General information

• Clean the hob after each use.

• Always use cookware with a clean

base.

• Scratches or dark stains on the

surface have no effect on how the hob

operates.

• Use a special cleaner suitable for the

surface of the hob.

• Use a special scraper for the glass.

7.2 Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage

to the hob. Take care to avoid burns.

Use a special hob scraper on the

glass surface at an acute angle and

move the blade on the surface.

• Remove when the hob is

sufficiently cool: limescale rings,

water rings, fat stains, shiny metallic

discoloration. Clean the hob with a

moist cloth and a non-abrasive

detergent. After cleaning, wipe the

hob dry with a soft cloth.

• Remove shiny metallic

discoloration: use a solution of water

with vinegar and clean the glass

surface with a cloth.

8. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

8.1 What to do if...

Problem Possible cause Remedy

You cannot activate or oper‐

ate the hob.

The fuse is blown. Make sure that the fuse is

the cause of the malfunction.

If the fuse is blown again

and again, contact a quali‐

fied electrician.

You touched 2 or more sen‐

sor fields at the same time.

Touch only one sensor field.

Pause operates. Refer to "Daily use".

www.aeg.com16

Problem Possible cause Remedy

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

You put something on one or

more sensor fields.

Remove the object from the

sensor fields.

Residual heat indicator does

not come on.

The zone is not hot because

it operated only for a short

time or the sensor is dam‐

aged.

If the zone operated suffi‐

ciently long to be hot, speak

to an Authorised Service

Centre.

Hob²Hood does not work. You covered the control pan‐

el.

Remove the object from the

control panel.

Automatic Heat Up does not

operate.

The zone is hot. Let the zone become suffi‐

ciently cool.

The highest heat setting is

set.

The highest heat setting has

the same power as the func‐

tion.

The heat setting changes

between two levels.

Power management oper‐

ates.

Refer to "Daily use".

The sensor fields become

hot.

The cookware is too large or

you put it too near to the

controls.

Put large cookware on the

rear zones if possible.

There is no sound when you

touch the panel sensor

fields.

The sounds are deactivated. Activate the sounds. Refer to

"Daily use".

comes on.

Automatic Switch Off oper‐

ates.

Deactivate the hob and acti‐

vate it again.

comes on.

Child Safety Device or Lock

operates.

Refer to "Daily use".

comes on.

There is no cookware on the

zone.

Put cookware on the zone.

The cookware is unsuitable. Use suitable cookware. Re‐

fer to "Hints and tips".

The diameter of the bottom

of the cookware is too small

for the zone.

Use cookware with correct

dimensions. Refer to "Tech‐

nical data".

ENGLISH 17

Problem Possible cause Remedy

and a number come on.

There is an error in the hob. Deactivate the hob and acti‐

vate it again after 30 sec‐

onds. If comes on again,

disconnect the hob from the

electrical supply. After 30

seconds, connect the hob

again. If the problem contin‐

ues, speak to an Authorised

Service Centre.

You can hear a constant

beep noise.

The electrical connection is

incorrect.

Disconnect the hob from the

electrical supply. Ask a

qualified electrician to check

the installation.

8.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Give also

three digit letter code for the glass

ceramic (it is in the corner of the glass

surface) and an error message that

comes on. Make sure, you operated the

hob correctly. If not the servicing by a

service technician or dealer will not be

free of charge, also during the warranty

period. The instructions about the

Service Centre and conditions of

guarantee are in the guarantee booklet.

9. TECHNICAL DATA

9.1 Rating plate

Model IEB64000XB PNC 949 597 293 00

Typ 61 B4B 00 AA 220 - 240 V 50 - 60 Hz

Induction 7.35 kW Made in Germany

Ser.Nr. ................. 7.35 kW

AEG

9.2 Cooking zones specification

Cooking zone Nominal power

(maximum

heat setting)

[W]

PowerBoost

[W]

PowerBoost

maximum dura‐

tion [min]

Cookware di‐

ameter [mm]

Left front 2300 3700 10 180 - 210

Left rear 1400 2500 4 125 - 145

Right front 1800 2800 10 145 - 180

Right rear 1800 2800 10 145 - 180

www.aeg.com18

The power of the cooking zones can be

different in some small range from the

data in the table. It changes with the

material and dimensions of the

cookware.

For optimal cooking results use

cookware no larger than the diameter in

the table.

10. ENERGY EFFICIENCY

10.1 Product information according to EU 66/2014

Model identification IEB64000XB

Type of hob Built-In Hob

Number of cooking zones 4

Heating technology Induction

Diameter of circular cook‐

ing zones (Ø)

Left front

Left rear

Right front

Right rear

21.0 cm

14.5 cm

18.0 cm

Energy consumption per

cooking zone (EC electric

cooking)

Left front

Left rear

Right front

Right rear

178.4 Wh / kg

183.2 Wh / kg

184.9 Wh / kg

Energy consumption of the

hob (EC electric hob)

182.9 Wh / kg

EN 60350-2 - Household electric cooking

appliances - Part 2: Hobs - Methods for

measuring performance

10.2 Energy saving

You can save energy during everyday

cooking if you follow below hints.

• When you heat up water, use only the

amount you need.

• If it is possible, always put the lids on

the cookware.

• Before you activate the cooking zone

put the cookware on it.

• Put the smaller cookware on the

smaller cooking zones.

• Put the cookware directly in the centre

of the cooking zone.

• Use the residual heat to keep the food

warm or to melt it.

11. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol .

Put the packaging in relevant containers

to recycle it. Help protect the

environment and human health by

recycling waste of electrical and

electronic appliances. Do not dispose of

appliances marked with the symbol

with the household waste. Return the

product to your local recycling facility or

contact your municipal office.

ENGLISH 19

TABLE DES MATIÈRES

1. INFORMATIONS DE SÉCURITÉ....................................................................... 20

2. CONSIGNES DE SÉCURITÉ............................................................................. 23

3. INSTALLATION...................................................................................................25

4. DESCRIPTION DE L'APPAREIL........................................................................ 27

5. UTILISATION QUOTIDIENNE............................................................................29

6. CONSEILS..........................................................................................................34

7. ENTRETIEN ET NETTOYAGE...........................................................................36

8. DÉPANNAGE......................................................................................................37

9. CARACTÉRISTIQUES TECHNIQUES...............................................................39

10. RENDEMENT ÉNERGÉTIQUE........................................................................ 39

POUR DES RÉSULTATS PARFAITS

Merci d’avoir choisi ce produit AEG. Nous l’avons conçu pour qu’il vous offre des

performances irréprochables pendant de nombreuses années, en intégrant des

technologies innovantes vous simplifiant la vie – fonctions que vous ne trouverez

peut-être pas sur des appareils ordinaires. Veuillez prendre quelques instants

pour lire cette notice afin d’utiliser au mieux votre appareil.

Consultez notre site pour :

Obtenir des conseils d’utilisation, des brochures, un dépanneur, des

informations sur le service et les réparations :

www.aeg.com/support

Enregistrer votre produit pour un meilleur service :

www.registeraeg.com

Acheter des accessoires, consommables et pièces de rechange d’origine pour

votre appareil :

www.aeg.com/shop

SERVICE ET ASSISTANCE À LA CLIENTÈLE

N’utilisez que des pièces de rechange d’origine.

Avant de contacter notre centre de service agréé, assurez-vous de disposer des

informations suivantes : Modèle, PNC, numéro de série.

Ces informations figurent sur la plaque signalétique.

Avertissement/Consignes de sécurité

Informations générales et conseils

Informations environnementales

Sous réserve de modifications.

1. INFORMATIONS DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez

soigneusement les instructions fournies. Le fabricant ne

pourra être tenu pour responsable des blessures et

dégâts résultant d'une mauvaise installation ou

www.aeg.com20

La page charge ...

AEG IEB64000XB Manuel utilisateur

AEG IEB64000XB Manuel utilisateur

dans d''autres langues