Samsung WA92J7 Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur

Ce manuel convient également à

FEATURES 1
SAFETY INSTRUCTIONS 2
DESCRIPTION OF PARTS 3
CONTROL PANEL 4
WASHING PROCEDURE 5
Fuzzy(Digital) course 5
Blanket course 5
Speedy course 5
Wool course 5
Eco
+
course 5
Delay start course 5
Air Turbo course 5
MANUAL FUNCTIONS 6
INSTALLATION & MAINTENANCE 7
Environment 7
Levelling 7
Connecting the water supply hose 7
Assembling the rat protection
panel 8
In case of pump-drained washer
8
Connecting the drain hose 8
How to add the fabric softener 8
How to put the detergent in 8
Water supply connector filter 9
Cleaning the filter net. 9
How to clean the filter 9
How to assemble the legs 9
TROUBLESHOOTING 10
SPECIFICATIONS
Please read this manual before using and note
how to use in the proper manner.
Please be careful of keeping the manual.
Otherwise, it should be bought separately.
WASHING MACHINE
Users Manual
Register your product at
www.samsung.com/global/register
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
WA90J7G1-02205A-0719.indd 1 2005-07-20 ¿ÀÈÄ 6:08:06
AIR TURBO
- Faster Drying Performance without Twists & Tangles
• Time Saving
AIR T
URBO saves your time, ensuring your clothes are dried 30%-40% faster than line drying alone.
Especially during the rainy season and in high-humid weather, laundry that once took days to drip-dry, such
as heavy jeans, bulky sweaters, and thick blankets are dried more rapidly.
With AIR TURBO you can wash your clothes in the evening, hang them to dry indoors, and have them
ready to wear the next morning. Therefore, you can wear your favorite clothes more often with the
knowledge that they are always clean.
• Easy-to-iron
AIR TURBO is perfect for delicates and clothes made of synthetic fabrics. No more hanging and waiting.
Simply iron straight-out-of-the washer, since AIR TURBO eliminates just enough moisture to keep clothes
adequately damp for ironing.
TUB DRYING FUNCTION
After the wash is finished, the user can select the tub drying function to remove the remaining water within
the tub. This will help prevent black mold from building up in the inner tub. The user can ensure that the
tub is always clean.
• When using this program, do not place any laundry inside the tub.
FUZZY(DIGITAL) CONTROL
Fuzzy(Digital) control operates with best washing course by sensing the washload like artificial intelligence.
TRANSPARENT WINDOW
This Transparent Window is the new concept to solve the curiosity of users to see inside of washing
machine while operation.
While operation, the laundry progress inside of washing machine can be checked by looking through the
transparent window.
PULSATOR
The Pulsator helps water and detergent to go through fabrics efficiently while providing both the powerful
water action to clean larger and heavier clothes and the gentle water action to clean all delicates with less
wear and tear on clothes.
WATERFALL FLOW
The Waterfall Flow injected from under the pulsator cascades with full force back into the tub, pushing
down any clothes that float right under the water surface. It is this Waterfall Flow that enables this washing
machine to effectively wash large and heavy items, such as bluejeans and blankets.
MAGIC FILTER
This unique magic Filter ensures that all the lint inside the tub is captured for top quality filtering results to
deliver consistently effective cleaning results.
SOFTENER DISPENSER
The Softener Dispenser releases the fabric softener at the appropriate time when the last rinsing proceeds.
AUTO RESTART
The power is turned on automatically after power failure.
CHILD-LOCK SYSTEM
• This is a device to protect children from being accidentally hurt while playing with the washer.
• How to start the Child-Lock function:
- Press the "Power" button to go to an initial washing mode.
-
By pressing "Start/Hold" button, you start washing and in case Child Lock function is needed during the laundry
- Press and hold down both the “Course” and “Function” buttons simultaneously for more than 3 seconds.
In the event that you would like to modify the Child-Lock function, "L" signal flashes in the "signal window
showing the rest of the set time" every two seconds, which means it is locked and indicates how much time is left
until the function is released.
• To release the function of Child-Lock:
- In case the "Child-Lock" is programmed, Press and hold down both the “Course” and “Function” buttons
simultaneously for more than 3 seconds.
1
FEATURES
WA90J7G1-02205A-0719.indd 2 2005-07-20 ¿ÀÈÄ 6:08:06
2
SAFETY INSTRUCTIONS
Please note that the following precautions for safety intend to prevent unpredictable danger and damage by
helping the proper use in safety.
When using hot water in washing, please make sure that the water should not exceed 50˚C.
Plastic parts may be deformed or damaged, and an electric shock or a fire may take place.
WARNING
There might be serious injury or fatal accident when
you violate this instruction.
If the plug (power supply cord) is damaged, it must
be replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid a hazard.
Do not pull the cord off or touch it with moist
hands.
- An electric shock or a fire may take place.
Do not bend the power supply cord by force or
press it with heavy things.
- An electric shock or a fire may take place.
Do not install the washer nearby electric imple-
ment or don’t put a candle light or cigarette light
on the washer.
- A fire may take place.
During operation, do not put your hands or metal
materials under the washer.
- You may be hurt by spinning board beneath the
washer.
Stay away from the washer when the bottom of
the washer sinks into the water.
- There might be an electric shock. Please wait
until the water drains out completely.
Do not put laundry stained with gasoline, benzene,
or alcohol in the washer, and keep the materials
away from the washer.
- An explosion or a fire may take place.
During spinning, don’t put your hand in the spin-
ning tub.
- It may hurt your hands. If it does not stop within
15 seconds after you open the lid, call
service
agent immediately.
This appliance is not intended for use by young
children or infirm persons unless they have been
adequately supervised by a responsible person
to ensure that they can use the appliance safely.
Young children should be supervised to ensure
that they do not play with the appliance.
This appliance has to be connected to the plug
endurable to proper power consumption.
This appliance has to be positioned so that the
plug is accessible after installation.
No user-serviceable parts inside. Refer any ser-
vicing to qualified service personnel.
- Otherwise this may cause a mechanical error,
electric shock, fire or physical damage.
- The product warranty does not cover problems
resulting from disassembling the product.
• Do not use this product for business purposes.
CAUTIONS
There might be a slight injury or damage when you
violate this instruction.
Don’t install it in the area with moisture or outdoor
where it has rain or snow
- An electric shock or a fire may take place.
Please unplug the power supply cord when you do
not use it.
- An electric shock or a fire may take place.
If there is dust or water on the power supply plug
and its connected part, please remove it complete
-
ly.
- An electric shock or a fire may take place.
Do not make your kids look into the inside of the
washer.
- If your kid falls into the washer, his life could be
in danger.
Ventilate immediately without touching the power
plug if gas is leaking.
- An electric shock or a fire may take place if it
catches flame.
If the washer makes strange noise, smell or
smoke, unplug it promptly and call service agent.
- An electric shock or a fire may take place.
When cleaning, don’t spray water to the parts of
the washer directly.
- It may make it’s life span shorten.
Also an electric shock or fire may take place
Don’t use several appliances together with an out-
let.
- A fire may take place due to unusual heat.
• Don’t press the button with an awl or pin.
- An electric shock or a fire may take place.
Use the new hose-sets and old hose-sets should
not be reused.
If the damage is found on the current cord in use,
it should be replaced by manufacturer, service
cener or authorized person in order to avoid the
risk.
Connect the grounding wire to the shell plate, and
bury it under at least 25cm of earth:elternatively,
connect the ground wire to the appropriate pin
on a properly grounded power receptacle. Never
connect the wire to a telephone line, lightning rod,
or gas pipe.
WA90J7G1-02205A-0719.indd 3 2005-07-20 ¿ÀÈÄ 6:08:06
3
DESCRIPTION OF PARTS
WATER SUPPLY HOSE (COLD)
Lint will be collected in
the filter during
washing.
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
POWER CORD
SPIN BASKET
ADJUSTABLE LEGS
Adjust the length
of the legs when
installing the washer.
FRONT CONTROL
PANEL
BLEACH INLET
PULSATOR
FABRIC SOFTENER
DISPENSER
GROUND LEAD
When the water pipe is
metal, make sure to cover
the end of the ground wire.
WATER DRAIN HOSE
SOUND ABSORPTION
PANEL
FILTER
LID
Be sure to keep the lid
closed during washing
and spinning.
DRAIN-HOSE (PUMP)
DETERGENT BOX
WA90J7G1-02205A-0719.indd 4 2005-07-20 ¿ÀÈÄ 6:08:07
For more details, see control panel of your washing machine.
4
CONTROL PANEL
POWER BUTTON
Press this button once to operate.
Press once again to turn the power off.
START/HOLD BUTTON
Use to pause and restart the operation.
To change the washing procedure during operation, press this button to stop,
and once again to restart after changing the procedure.
DELAY START BUTTON
Press this button when delay start washing is needed.
COURSE SELECT BUTTON
With every press of this button, the washing course changes;
FUZZY(DIGITAL)
BLANKET
SPEEDY
WOOL ECO
+
FUZZY(DIGITAL)
FUNCTION SELECT BUTTON
With every press of this button, the function changes; SOAK,WASH,RINSE,SPIN
WASH RINSE SPIN WASH&RINSE RINSE&SPIN TUB DRYING WASH,RINSE,SPIN
WATER LEVEL SELECT BUTTON
According to the washload,select the water level ;
MEDIUM
HIGH EXTRA LOW LOW MEDIUM
AIR TURBO SELECT BUTTON
As you press this button, the additional spinning time is selected in the following order;
15min
30min OFF 15min
REMAINING TIME INDICATOR LIGHT
The indicator light shows the remaining time (in minutes) of each wash cycle.
At the end of the cycle,the power automatically switches off.
POWER
START/
HOLD
DELAY
START
COURSE
FUNCTION
AIR
TURBO
WATER
LEVEL
WA90J7G1-02205A-0719.indd 5 2005-07-20 ¿ÀÈÄ 6:08:08
5
FUZZY(DIGITAL) COURSE
Selects the best washing course
automatically.
1. Press the POWER Button to"ON".
2. Press the START/HOLD button.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
3. Close the lid.
BLANKET COURSE
1. Press the power button to "ON".
2. Press the course select button once.
3. Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
SPEEDY COURSE
Because washing is speedy, it is
good for light or less stained laundry.
1. Press the power button to "ON".
2. Press the course select button twice.
3. Press the START/HOLD button
Water level is selected automatically
.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
WOOL COURSE
1.Press the power button to "ON".
2.Press the course select three times.
3.Press the START/HOLD button.
Washing,rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
CAUTION . . .
-Do not use water above 30˚C for WOOL washing.
-Refer to the tag attached on the clothes for washing
information.
-Fasten buttons and turn inside out before washing.
-Use the detergent indicated in the laundry.
-When the degree of dirt is extreme, soak the laundry in warm
water for about 10 minutes before pressing the WOOL course
button in order to enhance washing efficiency.
ECO
+
COURSE
1. Press the power button to "ON".
2. Press the course select button four times.
3. Press the START/HOLD button
Water level is selected automatically.
Washing, rinsing, and spinning follow.
If you want to pause, press the START/HOLD
button again.You can change the course when paused.
4. Close the lid.
DELAY START COURSE
Select this course when you have to go out or do
something else.
1. Press the power button to "ON".
2. Press the DELAY START button once.
You may change the delay start time with
use the DEALY START button. (from 3 hours to 18 hours)
3. Press the START/HOLD button and put
the proper amount of detergent into tub.
4. Close the lid.
The washing finishes by the time you reserved.
AIR TURBO
COURSE
1. Press the power button to "ON".
2. Press the AIR TURBO button.
Each time the Air Turbo button is pressed, the operations
are performed in the following order:
15min
30min
OFF
15min
3. Press the START/HOLD button
4. Close the lid.
-This can be selected as an additional option for all courses
except Wool.
-The Air Turbo function is only available when SPIN or
Tub Drying is selected.
-Select this when you want to half-dry the laundry.
WASHING PROCEDURE
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a
tap open. Plug the power cord in. Make sure to lay down
the drain hose. (In case no drain pump)
Put the laundry into the washer and add detergent, too.
Be careful not to overload. Use right detergent
for the fabrics you are washing.
POWER
COURSE
START/
HOLD
COURSE
POWER
START/
HOLD
DELAY
START
POWER
START/
HOLD
POWER
COURSE
START/
HOLD
POWER
COURSE
START/
HOLD
POWER
COURSE
START/
HOLD
POWER
AIR
TURBO
START/
HOLD
WA90J7G1-02205A-0719.indd 6 2005-07-20 ¿ÀÈÄ 6:08:09
POWER
START/
HOLD
FUNCTION
6
Each washing course changes manually.
Ex) If you want to wash in the speedy course : Power - Select speedy course - Wash - Start/Hold button
once
POWER COURSE
FUNCTION
START/
HOLD
twice
four times
three times
five times
six times
seven times
MANUAL FUNCTIONS
SOAK FUNCTION (Including WASH, RINSE, SPIN)
Press the POWER button.
Select the course(Press the course button).
FUZZY(DIGITAL), BLANKET, SPEED, WOOL,
ECO
+
Press the FUNCTION SELECT button once.
Press the START/HOLD button once.
Water level is selected automatically.
Washing,rinsing, and spinning follow.
WASH ONLY
Press the POWER button.
Press the FUNCTION SELECT button twice.
Press the START/HOLD button once.
Washing goes on for 18 minutes.
When the FUNCTION button is pressed during washing, the wash
time can be changed to between 3 and 25 minutes in duration.
RINSE ONLY
Press the FUNCTION button three times.
Press the START/HOLD button once.
Rinsing goes on for 15 minutes.
When the FUNCTION button is pressed during rinsing, the rinse
times can be changed to between 1 to 5 times in duration.
SPIN ONLY
Press the FUNCTION button four times.
Press the START/HOLD button once.
Spin drying goes on for 11 minutes.
When the FUNCTION button is pressed during spinning,
the spin time can be changed to from 1 to 7 minutes.
WASH AND RINSE
Press the FUNCTION button five times.
Press the START/HOLD button once.
Washing and rinsing go on for 38 minutes.
When the FUNCTION button is pressed during working, the rinse
times can be changed to between 1 to 5 times in duration.
RINSE AND SPIN
Press the FUNCTION button six times.
Press the START/HOLD button once.
Rinsing and spin drying follow.
When the FUNCTION button is pressed during working, the rinse
times can be changed to between 1 and 5 times in duration.
TUB DRYING
Press the FUNCTION button seven times.
Press the START/HOLD button once.
Spin drying goes on for 14 minutes.
When the FUNCTION button is pressed during spinning,
the spin time can’t be changed.
POWER
START/
HOLD
FUNCTION
POWER
START/
HOLD
FUNCTION
POWER
START/
HOLD
FUNCTION
POWER
START/
HOLD
FUNCTION
POWER
START/
HOLD
FUNCTION
WA90J7G1-02205A-0719.indd 7 2005-07-20 ¿ÀÈÄ 6:08:09
1. Remove the adaptor
from the water
supply hose.
5. Connect the other end of the water
supply hose to the inlet water valve
at the back of the washer.
Screw the hose clockwise all the
way in.
2. First,using a "+" type
screw driver, loosen the
four screws on the adaptor.
Next,take the adaptor and
turn part(b) following the
arrow for gap about 5mm
between them.
a
b
5-1.Connect the other end of the water
supply hose to the inlet water valve
at the top of the washer.
Screw the hose clockwise all the
way in.
3. Connect adaptor to the
water tap by tightening
the screws firmly.
Then, turn part (b)
following the arrow and
put (a) and (b)together.
a
b
If the water tap is a screw type, assemble
a water supply hose that fits to the
tap as shown.
4. Connect the water supply
hose to the adaptor. Pull down
the part (c) of the water supply
hose .When the part (c)is
released, the hose is automatically
connected to the adaptor
making a 'click' sound.
c
NOTICE After completing connection, if water leaks from the hose,
then repeat the same steps.
Use the most conventional type of faucet for water supply.
In case the faucet is square or too big,remove the spacing
efore inserting the faucet into the adaptor.
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
7
INSTALLATION & MAINTENANCE
Lock Loosen
ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface,
noise or vibration occurs. (Allowable is 1˚)
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the
washer is directly exposed to rain.Moisture may destroy the
electrical insulation causing an electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic and electrical components are affected by direct
heat,never place the washer near furnaces, boilers, etc.
Do not place under direct sunlight.
LEVELLING
If the washer is not leveled with the ground, it makes the machine tremble more or be out of order.
So, make sure that the washer is leveled properly.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
Open the lid of the machine, pour water into the tub up to the level just
below the pulsator, and adjust the legs so that the pulsator is positioned
at the center of the water as shown in the figure.
Place the machine more than
10cm away from the wall.
Adjust the legs on feet
for levelling .
1. Adjust the side horizontally
first and the front
in same direction next.
2. If the thread is not
within the limit, adjust
the height of
the legs.
CONNECTING THE WATER SUPPLY HOSE
WA90J7G1-02205A-0719.indd 8 2005-07-20 ¿ÀÈÄ 6:08:11
Install the drain hose in the
position of about 90~100cm
above the ground.
8
When a proper amount (one time does) of fabric
softener is stored in the softener inlet,it is
automatically put in at the last rinsing cycle.
Do not use detergent, bleach or starch into
the Softener Inlet.
Using too much softener may produce
unsatisfactory results.
Do not open the lid during the Spin Dry cycle.
If added too early, its effectiveness will decrease.
Do not leave the softener
into the Softener
Dispenser for a long time.
Because softner
became stiff.
CONNECTING THE DRAIN HOSE
After pressing the joint ring(a), insert the drain hose(b)
to drain direction.
(a)
(b)
Rear-side
70~80cm
Be sure to join tightly the drain
hose into the drain-outlet
on the side of the machine.
Be sure to join tightly the drain hose into
the drain-outlet on the back of the
machine.
Take out the cap-hose and
connect the outlet-hose.
IN CASE OF PUMP-DRAINED WASHER
cap-hose
outlet-hose
ASSEMBLING THE RAT PROTECTION PANEL
1.Insert the sound
absorbing panel
to the assembling
hole on back side
to the end.
2.If you have difficulty
inserting the panel
lift up the washer a
little and insert it
Tilt the washer a little and lift up the panel until it clicks,
finally fix the panel with screw to the base as shown
in the figure.
HOW TO ADD THE FABRIC SOFTENER
90~100cm
1.Open the detergent box by pulling in the direction of the arrow as shown in the
figure and then put the powder detergent in the detergent box.
2. Put in one-time amount of detergent evenly so the detergent may not brim over the box.
HOW TO PUT THE DETERGENT IN
Detergent Device
Put the detergent
in proportion to
water level
Softener Device
Softener
baseline
CAUTION : If softener is stored over the above base line, it may flow down at any time.
WA90J7G1-02205A-0719.indd 9 2005-07-20 ¿ÀÈÄ 6:08:14
9
WATER SUPPLY CONNECTOR FILTER
1.
Pull out the filter and wash well.
2.
Pull in the filter and connect
the hose to the inlet water
valve tightly.
inlet water
valve
3.
Check if there is a leakage.
Note to tighten up the
connector.
CLEANING THE FILTER NET
Clean the filter net often to keep the washer clean.
1. Push the upper part
of the filter and pull in.
2. Open the cover as
shown in the figure.
3. Clean the filter. 4. Close the cover and insert the
lower part of the filter in the
basket first and then push the
filter with "click" sound .
HOW TO CLEAN THE FILTER
1. Place a rag under the washer filter not to wet the floor.
2. Rotate the filter counterclockwise
and pull out the filter.
3. Remove dirts and rotate
the filter clockwise
until it locks in position.
(pump drained washer)
1.Place a rag under washer filter not to wet the floor.
2.Turn the filter-cap to the left.
3.Take the filter out and
remove dirts.
4. Reassemble in
reverse order.
1. Check the 4 Legs.(Front-right. Front-left.
Rear-right. Rear-left)
2. Lay down the Washing Machine to the front.
3. Insert the hook of leg in to the square hole
of base.
4. Push the leg to the arrow direction to “Click”.
5. Finaly fix the legs on the base
with screw like a figure.
HOW TO ASSEMBLE THE LEGS
Screw
Base
Hole
Hook
WA90J7G1-02205A-0719.indd 10 2005-07-20 ¿ÀÈÄ 6:08:17
Washing machine won't work
Is the water tap opened?
Is the washer plugged in?
Is the power cut off?
Is there enough water?
Water is not supplied
Is the water tap opened?
Is the water cut off?
Is the water supply hose or hose
connection clogged?
Is the water tap frozen?
If water is not supplied in 1 hour,a
buzzer will sound, and the remaining
time indicator will show "4E".
Water dose not drain
Is the drain hose down?(No pump)
Is the drain hose frozen?
Is the drain hose clogged?
If the water dose not drain in 15
minutes, a buzzer will sound,and the
remaining time indicator will show "5E".
Spinning does not work
Is the laundry spread out evenly
in the washer?
Is the washer set on a sturdy
flat surface?
Water is overflowed
Restart after spinning.
If the error sign still indicates,
call agency.
10
TROUBLESHOOTING
WA90J7G1-02205A-0719.indd 11 2005-07-20 ¿ÀÈÄ 6:08:18
IN CASE THE NEED FOR SERVICING ARISES.
If any problem occurs with your products,do not hestitate to call any nearby.
Name, address, telephone number is required.
CODE NO. : DC68-02205A
SPECIFICATIONS
POWER
CONSUMPTION
WASH
330W
STANDARD
WATER LEVEL
HIGH
56 l
SPIN
246W
MEDIUM
49 l
IMENSIONS(mm)
W540xD560xH850(LOW BASE)
W540xD560xH910(HIGH
BASE)
LOW
41 l
EXTRA LOW
34 l
WEIGHT 31 kg
WATER USAGE
140
l
WATER
PRESSURE
0.05~0.78 MPa
(0.5 ~ 8.0 kg
.
f/cm
2
)
PULSATOR
ROTATING SPEED
113 rpm
WASHING TYPE Stirring Type
SPIN
ROTATING SPEED
720 rpm
WA90J7G1-02205A-0719.indd 12 2005-07-20 ¿ÀÈÄ 6:08:19
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Samsung WA92J7 Manuel utilisateur

Catégorie
Machines à laver
Taper
Manuel utilisateur
Ce manuel convient également à

dans d''autres langues