TP-LINK DECO S4 3-PACK AC1200 Le manuel du propriétaire

Taper
Le manuel du propriétaire
Whole Home Mesh Wi-Fi System
Seamless Roaming | Parental Controls | Adaptive Path Selection | Easy Setup
User Guide
AC1200 Whole Home Mesh Wi-Fi System
1910012710 REV2.0.0
Contents
About This Guide ···················································· 1
Appearance ······························································· 2
Set Up Your Deco ··················································· 3
Dashboard ·································································· 6
Wi-Fi Settings···························································· 8
Blacklist ········································································ 9
Online Update ·························································10
Advanced Features ·············································11
WPS ··············································································16
Parental Controls ··················································17
QoS···············································································18
Monthly Report ······················································19
Managers ··································································20
1
About This Guide
This guide provides a brief introduction to Deco Whole Home Mesh Wi-Fi System and the Deco app, as well as regulatory information.
Note: Features available in Deco may vary by model and software version. Deco availability may also vary by region or ISP. All images, steps, and
descriptions in this guide are only examples and may not reect your actual Deco experience.
Conventions
In this guide, the following conventions are used:
Convention Description
Deco
Stands for Deco Whole Home Mesh Wi-Fi System/Unit.
Underline
Hyperlinks are in teal and underlined. You can click to
redirect to a website or a specic section.
Teal
Key information appears in teal, including management
page text such as menus, items, buttons and so on.
Note:
Ignoring this type of note might result in a malfunction
or damage to the device.
Tips:
Indicates important information that helps you make
better use of your device.
More Info
Specific product information can be found on the product page at
https://www.tp-link.com.
A Technical Community is provided for you to discuss our products at
https://community.tp-link.com.
Our Technical Support contact information can be found at the Help
center of the Deco app and the Contact Technical Support page at
https://www.tp-link.com/support.
Speed/Coverage/Device Quantity Disclaimer
Maximum wireless transmission rates are the physical rates derived from
IEEE Standard 802.11 specifications. Range, coverage, and maximum
quantity of connected devices are based on test results under normal
usage conditions. Actual wireless data throughput. wireless coverage,
and quantity of connected devices are not guaranteed and will vary
as a result of 1) environmental factors, including building materials,
physical objects, and obstacles, 2) network conditions, including local
interference, volume and density of traffic, product location, network
complexity, and network overhead, and 3) client limitations, including
rated performance, location, connection quality, and client condition.
MU-MIMO Disclaimer
Use of MU-MIMO requires clients to also support MU-MIMO.
HomeCare Disclaimer
A basic TP-Link HomeCare™, powered by Trend Micro™, package is
included for 3 years from date of activation at no additional cost. It
includes Parental Controls, Quality of Service, and Antivirus. Deactivation
of HomeCare™ will disable certain controls and protections. For a
complete list of HomeCare™ functions, go to www.tp-link.com.
IoT Compatibility Disclaimer
IoT compatibility refers only to smart devices that can be controlled
via the Deco app. Other wireless devices can still connect to Deco for
normal Wi-Fi use.
Seamless Roaming Disclaimer
Clients need to support 802.11k/v/r and may require additional set up.
Performance may vary depending on the client device.
2
Appearance
Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports, a power slot, and a Reset button. See the explanation
below:
Power Slot:
For connecting Deco to the power socket via
the provided power adapter.
Ethernet Ports:
For connecting Deco to your modem, the
Ethernet outlet or other internet devices.
Reset Button:
Press 1 second to reset Deco to factory default
settings.
Yellow pulse:
Deco is resetting.
Yellow solid:
Deco is starting up.
Blue pulse:
Deco is ready for setup.
Blue solid:
Deco is setting up.
White pulse:
Deco is upgrading rmware.
White solid:
Deco is registered and all is well.
Red pulse:
Deco is disconnected from main Deco.
Red solid:
Deco has an issue.
3
Set Up Your Deco
Follow the steps below to set up your Deco Whole Home Mesh Wi-Fi System.
1. Download and install the Deco app
Scan the QR code below or go to Google Play
or the Apple App Store to download the Deco
app.
Install the app on your Android or iOS
smartphone or tablet.
or
2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in.
If you don’t have a TP-Link ID, tap Sign Up. The
Deco app will guide you through the rest.
3. Connect Deco to your modem
Find and power off your modem. Connect your
Deco to the modem and power them both on.
If you don't have a modem, connect the
Ethernet outlet directly to your Deco.
4
4. Select a location
Select a location for this Deco. If its location
is not listed, you can create a new one by
choosing Custom.
5. Set up internet connection
Select the internet connection type and enter
the information. If you are not sure, contact
your internet service provider.
6. Create your Wi-Fi network
Set a network name and a password. These
will be the name and password you use to
connect your devices to Wi-Fi.
5
7. Connect to your Wi-Fi network
Connect your devices to the Deco's Wi-Fi to
continue the set up.
8. Setup complete
Setup completed. Connect all devices to the
Deco network for better connections.
6
Dashboard
After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can check the working status of all the Decos,
manage the connected devices, add more decos, use friends of Deco, and more.
Tap to view connected devices Tap to check all Deco status Select a Deco to view the details View connected devices details
7
Tap to set up more features
Swipe right to open the menu Tap to add more devices
8
Wi-Fi Settings
You can change the network name and password of your main network, create a separate network for guests, and shake your device to share the
network details easily with family and friends.
Tap > Wi-Fi
Manage main Wi-Fi network Enable guest network Shake to share Wi-Fi
9
Blacklist
Compile a blacklist to avoid devices added on the blacklist to access to your network, ensuring the safety of your personal information shared in the
network.
Tap > Blacklist
Add clients to blacklist Add other devices to blacklist Manage blacklist
10
Online Update
TP-Link is dedicated to improving product features and providing a better customer experience. Update Deco when prompted in the Deco app.
Tap > Update Deco
Deco is up-to-date
11
Advanced Features
Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 & IPv6), add IPv6 rewall rules, modify LAN IP, set up
DHCP server, enable VLAN/IPTV/MAC Clone mode, reserve the same IP address for a specic device, set up port forwarding rules to make your local
computers accessible to other devices over the internet, enable TP-Link DDNS, SIP ALG, fast roaming and beamforming, control Deco's LED, change
the working mode, and congure the notication settings.
Tap > Advanced
View IPv4 details Enable IPv6 Add IPv6 firewall rules
12
Modify LAN IP Set DHCP server Enable VLAN mode Enable IPTV mode
13
Enable MAC Clone Reserve IP addresses for specific
devices
Set up port forwarding rules Register a TP-Link DDNS domain
name
14
Enable SIP ALG Enable Fast Roaming Enable Beamforming Enable LED controls
15
Change the operating mode Set notifications
16
WPS
Easily connect a client to the network by turning on WPS for a nearby Deco and then for the client.
Tap > WPS
Tap the WPS icon on Deco app and then on
the client
Successfully connected to the network
17
Parental Controls
Create proles for family members and specify the devices that belong to them. Set individualized parental controls including when and for how long
each person can access the internet. Block inappropriate content and pause the internet if necessary.
Tap > Parental Controls
Add new profile Set filter level Set time controls
18
QoS
Prioritize the connection of a particular device for a set duration, such as a family member's laptop for one hour during a video call.
Tap > QoS
Set bandwidth Prioritize devices
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

TP-LINK DECO S4 3-PACK AC1200 Le manuel du propriétaire

Taper
Le manuel du propriétaire

dans d''autres langues