Sony Bravia KDL-V32A11E Manuel utilisateur

KDL-V32A11E

KDL-V40A11E

LCD Digital Colour TV

2-658-162-11(4)

GB

DE

FR

ES

Operating Instructions

Before operating the TV, please read the “Safety

information” section of this manual.

Retain this manual for future reference.

Bedienungsanleitung

Lesen Sie vor der Inbetriebnahme des Fernsehgeräts bitte

den Abschnitt „Sicherheitsinformationen“ in dieser

Anleitung. Bewahren Sie die Anleitung zum späteren

Nachschlagen auf.

Mode d’emploi

Avant d’utiliser le téléviseur, lisez attentivement la section

« Consignes de sécurité » de ce manuel.

Conservez ce manuel pour toute référence ultérieure.

Manual de instrucciones

Antes de utilizar el televisor, lea la sección “Información de

seguridad” de este manual.

Conserve este manual para consultarlo en el futuro.

For useful information about Sony products

Fur hilfreiche Informationen zu Sony Produkten

Pour obtenir les informations utiles concernant les produits

Sony

Información de utilidad para productos Sony

2

GB

• To prevent the risk of electric shock, do not insert the plug

cut off from the mains lead into a socket outlet. This plug

cannot be used and should be destroyed.

• To prevent the risk of fire or electric shock, do not expose

the TV set to rain or moisture.

• Dangerously high voltages are present inside the TV set.

Do not open the cabinet. Refer servicing to qualified

personnel only.

Thank you for choosing this Sony product.

Before operating the TV, please read this manual

thoroughly and retain it for future reference.

Trademark information

• is a registered trademark of the DVB Project

• “PlayStation” is a trademark of Sony Computer

Entertainment, Inc.

• TruSurround technology is used as a virtualizer for Dolby

Virtual Surround.

• TruSurround, SRS and symbol are trademarks of

SRS Labs, Inc.

TruSurround technology is incorporated under license

from SRS Labs, Inc.

• This TV incorporates

High-Definition Multimedia

Interface (HDMI™) technology. HDMI, the HDMI logo

and High-Definition Multimedia Interface are trademarks

or registered trademarks of HDMI Licensing LLC.

WARNING Introduction

3

GB

Table of Contents

Safety information ....................................... 4

Precautions ................................................. 7

Disposal of the TV set........................................ 7

Overview of the remote ............................ 8

Overview of the TV buttons and

indicators.............................................. 9

1: Checking the accessories ..................... 10

2: Inserting batteries into the remote......... 10

3: Connecting an aerial/VCR..................... 11

4: Preventing the TV from toppling over.... 12

5: Switching on the TV .............................. 12

6: Selecting the language and

country/region ...................................... 13

7: Auto-tuning the TV ................................ 14

Watching TV.............................................. 15

Checking the Digital Electronic Programme

Guide (EPG) ............................... 18

Using the Favourite list .................... 20

Viewing pictures from connected

equipment ............................................ 21

Navigating through menus ........................ 21

Overview of the menus.................................... 22

Picture Adjustment menu .......................... 23

Mode ............................................................... 23

Contrast/Brightness/Colour/Hue/Sharpness/

Backlight.................................................... 23

Colour Tone..................................................... 23

Noise Reduction.............................................. 24

Dynamic Picture .............................................. 24

Gamma Correction.......................................... 24

Reset ............................................................... 24

Sound Adjustment menu........................... 25

Effect (sound effect)........................................ 25

Treble/Bass/Balance ....................................... 25

Auto Volume .................................................... 25

Dual Sound...................................................... 26

Volume (headphone volume)...................... 26

Dual Sound..................................................26

Reset ................................................................26

Screen Control menu.................................27

Auto Format......................................................27

Screen Format..................................................27

Screen Shift......................................................27

Features menu ..........................................28

Power Saving ...................................................28

Speaker............................................................28

AV2 Output.......................................................28

Picture Off ........................................................29

Timer menu ...............................................30

Sleep Timer ......................................................30

Auto Shutoff......................................................30

Set Up menu..............................................31

Auto Start Up....................................................31

Language.........................................................31

Country.............................................................31

Auto Tuning (Analogue mode only) .................32

Programme Sorting (Analogue mode only)......32

Programme Labels (Analogue mode only) ......32

AV Preset..........................................................33

Manual Programme Preset (Analogue mode

only)............................................................33

Digital Set Up .........................................36

Connecting optional equipment .................39

Programming the remote...........................41

Specifications ............................................43

Troubleshooting.........................................44

Index..........................................................47

Getting Started

Watching TV

Using the Menu

Using Optional Equipment

Additional Information

GB

: for digital channels

only

4

GB

Safety information

Mains lead

• Unplug the mains lead

when moving the TV

set. Do not move the

TV set with the mains

lead plugged in. It may

damage the mains lead

and result in fire or electric shock.

• If you damage the mains lead, it may

result in fire or electric shock.

– Do not pinch, bend, or twist the

mains lead excessively. The core

conductors may be exposed or

broken, causing a short-circuit,

which may cause fire or electric

shock.

– Do not modify or damage the mains

lead.

– Do not put anything heavy on the

mains lead. Do not pull the mains

lead.

– Keep the mains lead away from heat sources.

– Be sure to grasp the plug when disconnecting the mains

lead.

• If the mains lead is damaged, stop using it and ask your

dealer or Sony service centre to exchange it.

• Do not use the supplied mains lead on any other

equipment.

• Use only an original Sony mains lead, not other brands.

Mains lead/cable protection

Pull out the mains lead/cable by

the plug. Do not pull on the mains

lead/cable itself.

Mains

Do not use a poor fitting mains socket. Insert

the plug fully into the mains socket. A poor

fit may cause arcing and result in fire.

Contact your electrician to have the mains

socket changed.

Optional accessories

Observe the following when installing the

TV set using a stand or wall-mount bracket.

If you do not do so, the TV set may fall and

cause serious injury.

• It is strongly recommended that you use Sony accessories

for safety reasons:

– KDL-V40A11E:

Wall-mount bracket SU-PW2, TV stand SU-FF51.

– KDL-V32A11E:

Wall-mount bracket SU-WL31, TV stand SU-FF51.

• It is strongly recommended that you use the official Sony

wall-mount bracket to allow adequate air circulation and

to avoid dust build up around the TV, wall and ceiling.

• Secure the TV set properly, following the instructions

supplied with your stand or wall-mount bracket when

installing the TV set.

• Be sure to attach the brackets supplied with your stand.

Installation

If the TV set is to be installed on a

wall, have the installation carried

out by qualified service men.

Improper installation may render

the TV set unsafe.

Medical institutions

Do not place this TV set in a place

where medical equipment is in

use. It may cause malfunction of

medical instruments.

Carrying

• Before carrying the TV set, disconnect

all the cables from the TV set.

• When you carry the TV set by hand,

hold the TV set as illustrated on the

right. If you do not do so, the TV set

may fall and be damaged or cause

serious injury. If the TV set has been

dropped or damaged, have it checked immediately by

qualified service personnel.

• When transporting it, do not subject the TV set to jolts or

excessive vibration. The TV set may fall and be damaged

or cause serious injury.

• When you carry the TV set in for repair or when you move

it, pack it using the original carton and packing material.

• Carrying the TV set requires two or more people.

Ventilation

• Never cover the ventilation

holes in the cabinet. It may

cause overheating and result in

fire.

• Unless proper ventilation is provided, the TV set may

gather dust and get dirty. For proper ventilation, observe

the following:

– Do not install the TV set turned backwards or sideways.

– Do not install the TV set turned over or upside down.

– Do not install the TV set on a shelf or in a closet.

– Do not place the TV set on a rug or bed.

– Do not cover the TV set with cloth, such as curtains, or

items such as newspapers, etc.

• Leave some space around the TV set. Otherwise, air-

circulation may be inadequate and cause overheating,

which may cause fire or damage to the TV set.

30 cm

Leave

at least

this

much

space.

10 cm 10 cm

5

GB

• When installing the TV set on the wall, leave at least 10

cm space from the bottom of the TV set.

• Never install the TV set as follows:

Ventilation holes

Do not insert anything in the ventilation

holes. If metal or liquid is inserted in these

holes, it may result in fire or electric shock.

Placement

• Never place the TV set in hot, humid

or excessively dusty places.

• Do not install the TV set where

insects may enter.

• Do not install the TV set where it

may be exposed to mechanical vibration.

• Place the TV set on a stable, level surface.

Otherwise, the TV set may fall and cause

injury.

• Do not install the TV set in a location

where it may protrude, such as on or

behind a pillar, or where you might bump

your head on it. Otherwise, it may result

in injury.

Water and moisture

• Do not use this TV set near water

– for example, near a bathtub or

shower room. Also do not expose

to rain, moisture or smoke. This

may result in fire or electric shock.

• Do not touch the mains lead and the TV

set with wet hands. Doing so may cause

electric shock or damage to the TV set.

Moisture and flammable objects

• Do not let this TV set get wet. Never

spill liquid of any kind on the TV set.

If any liquid or solid object does fall

through openings in the cabinet, do

not operate the TV set. It may result in

electric shock or damage to the TV set.

Have it checked immediately by

qualified service personnel.

• To prevent fire, keep flammable objects (candles, etc.) and

electric bulbs away from the TV set.

Oils

Do not install this TV set in restaurants that use oil. Dust

absorbing oil may enter and damage the TV set.

Fall

Place the TV set on a secure, stable stand. Do

not hang anything on the TV set. If you do,

the TV set may fall from the stand or wall-

mount bracket, causing damage or serious

injury.

Do not allow children to climb on the TV set.

Vehicle or ceiling

Do not install this TV set in a

vehicle. The motion of the vehicle

may cause the TV set to fall down

and cause injury. Do not hang this

TV set from the ceiling.

Ships and other vessels

Do not install this TV set on a ship

or other vessel. If the TV set is

exposed to seawater, it may cause

fire or damage the TV set.

Outdoor use

• Do not expose the TV set to

direct sunlight. The TV set may

heat up and this may result in

damage to the TV set.

• Do not install this TV set

outdoors.

Wiring

• Unplug the mains lead when wiring cables. When hooking

up, be sure to unplug the mains lead for your safety.

• Take care not to catch your feet on the cables. It may

damage the TV set.

Cleaning

• Unplug the mains lead when cleaning the

mains plug and this TV set. If you do not,

it may result in electric shock.

• Clean the mains plug regularly. If the

plug is covered with dust and it picks up

moisture, its insulation may deteriorate

and result in fire.

Lightning storms

For your own safety, do not touch any

part of the TV set, mains lead, or

aerial lead during lightning storms.

Air circulation

is blocked.

Air circulation

is blocked.

Wall Wall

Continued

6

GB

Damage requiring service

If the surface of the TV set cracks, do not touch it until you

have unplugged the mains lead. Otherwise electric shock

may result.

Servicing

Do not open the cabinet. Entrust the

TV set to qualified service personnel

only.

Small accessories removal and

fittable

Keep accessories out of children’s reach. If they are

swallowed, choking or suffocation may occur. Call a doctor

immediately.

Broken glass

Do not throw anything at the TV set. The

screen glass may explode by the impact

and cause serious injury.

When not in use

For environmental and safety

reasons, it is recommended that

the TV set is not left in standby

when unused. Disconnect from

the mains. However, some TV

sets may have features which need the TV set to be left in

standby to work correctly. The instructions in this manual

will inform you if this applies.

Viewing the TV

• To view the TV comfortably, the recommended viewing

position is from four to seven times the screen’s vertical

length away from the TV set.

• View the TV in moderate light, as viewing the TV in poor

light strains your eyes. Watching the screen continuously

for long periods of time can also strain your eyes.

• If the angle of the TV set is to be adjusted, steady the base

of the stand with your hand to prevent the TV set from

becoming separated from the stand. Be careful not to get

your fingers caught between the TV set and the stand.

Volume adjustment

• Adjust the volume so as not to trouble your neighbours.

Sound carries very easily at night time. Therefore, closing

the windows or using headphones is suggested.

• When using headphones, adjust the volume so as to avoid

excessive levels, as hearing damage may result.

Overloading

This TV set is designed to operate on

a 220–240 V AC supply only. Take

care not to connect too many

appliances to the same mains socket

as this could result in fire or electric

shock.

Heat

Do not touch the surface of the TV set. It remains hot, even

after the TV set has been turned off for some time.

Corrosion

If you use this TV set near the seashore, salt may corrode

metal parts of the TV set and cause internal damage or fire.

It may also shorten the life of the TV set. Steps should be

taken to reduce the humidity and moderate the temperature

of the area where the TV set is located.

7

GB

Precautions

LCD Screen

• Although the LCD screen is made with high-precision

technology and 99.99% or more of the pixels are effective,

black dots may appear or bright points of light (red, blue,

or green) may appear constantly on the LCD screen. This

is a structural property of the LCD panel and is not a

malfunction.

• Do not expose the LCD screen surface to the sun. Doing

so may damage the screen surface.

• Do not push or scratch the front filter, or place objects on

top of this TV set. The image may be uneven or the LCD

panel may be damaged.

• If this TV set is used in a cold place, a smear may occur in

the picture or the picture may become dark.

This does not indicate a failure. These phenomena

disappear as the temperature rises.

• Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in

use. This is not a malfunction.

• The LCD contains a small amount of liquid crystal and

mercury. The fluorescent tube used in this TV set also

contains mercury. Follow your local ordinances and

regulations for disposal.

Fluorescent lamp

This TV set uses a special fluorescent lamp as its light

source. If the screen image becomes dark, flickers, or does

not appear, the fluorescent lamp has worn out and the LCD

screen should be replaced. For replacement, consult qualified

service personnel.

Installing the TV set

• Do not install the TV set in places subject to extreme

temperature, for example in direct sunlight, or near a

radiator, or heating vent. If the TV set is exposed to

extreme temperature, the TV set may overheat and cause

deformation of the casing or cause the TV set to

malfunction.

• The TV set is not disconnected from the mains when the

TV set is switched off. To disconnect the TV set

completely, pull the plug from the mains.

• To obtain a clear picture, do not expose the screen to direct

illumination or direct sunlight. If possible, use spot

lighting directed down from the ceiling.

• Do not install optional components too close to the TV set.

Keep optional components at least 30 cm away from the

TV set. If a VCR is installed in front of the TV set or

beside the TV set, the picture may become distorted.

Handling and cleaning the screen surface/cabinet of

the TV set

The screen surface is finished with a special coating to

prevent strong light reflections.

To avoid material degradation or screen coating degradation,

observe the following precautions.

• Do not push on the screen, scratch it with a hard object, or

throw anything at it. The screen may be damaged.

• Do not touch the display panel after operating the TV set

continuously for a long period as the display panel

becomes hot.

• We recommend that the screen surface be touched as little

as possible.

• To remove dust from the screen surface/cabinet, wipe

gently with a soft cloth. If dust is persistent, wipe with a

soft cloth slightly moistened with a diluted mild detergent

solution. You can wash and repeatedly use the soft cloth.

• Never use any type of abrasive pad, alkaline/acid cleaner,

scouring powder, or volatile solvent, such as alcohol,

benzene, thinner or insecticide. Using such materials or

maintaining prolonged contact with rubber or vinyl

materials may result in damage to the screen surface and

cabinet material.

• The ventilation holes can accumulate dust over time. To

ensure proper ventilation, we recommend removing the

dust periodically (once a month) using a vacuum cleaner.

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on

its packaging indicates that this

product shall not be treated as

household waste. Instead it shall

be handed over to the applicable

collection point for the recycling

of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment and

human health, which could otherwise be caused by

inappropriate waste handling of this product. The recycling

of materials will help to conserve natural resources. For more

detailed information about recycling of this product, please

contact your local Civic Office, your household waste

disposal service or the shop where you purchased the

product.

Disposal of the TV set

8

GB

Overview of the remote

1 TV "/1 – TV standby

Switches off the TV temporarily and on from standby mode.

2 Media selector (page 41)

Selects which equipment you want to operate. A green light will be momentarily

lit to show which one you have selected.

3 ANALOG – Analogue mode (page 15)

4 / – Input select / Text hold

• In TV mode (page 21): Selects the input source from equipment connected to

the TV sockets.

• In Text mode (page 16): Holds the current page.

5 – Screen mode (page 17)

6 Number buttons

• In TV mode: Selects channels. For channel numbers 10 and above, enter the

second digit within two seconds.

• In Text mode: Enters the three digit page number to select the page.

7 / -/-- – Previous channel / VCR double digit

• In TV mode: Returns to the previous channel watched (for more than five

seconds).

• In VCR mode: Selects the double-digit channels for Sony’s VCR (e.g., for 23,

press -/-- and then the 2 and 3).

8 / – Text (page 16)

9 M/m/</,/OK (page 16, 21)

q; – Favourite (page 20)

qa PROG +/- (page 15)

• In TV mode: Selects the next (+) or previous (-) channel.

• In Text mode: Selects the next (+) or previous (-) page.

qs MENU (page 21)

qd 2 +/- – Volume

qf – This button has no function for this TV.

qg – EPG (Digital Electronic Programme Guide) (page 18) / NexTView (page 16)

qh Coloured buttons

• In digital mode (page 18, 20): Selects the options at the bottom of the Favourite and EPG digital menus.

• In VCR and DVD mode (page 41): Operates the main functions of your VCR or DVD.

qj / – Info / Text reveal

• In digital mode: Displays brief details of the programme currently being watched.

• In analogue mode: Displays information such as current channel number and screen mode.

• In Text mode (page 16): Reveals hidden information (e.g., answers to a quiz).

qk – Picture mode (page 23)

ql 9 – Sound effect (page 25)

w; DIGITAL – Digital mode (page 15)

wa % – Mute (page 15)

ws AUX/VIDEO "/1

Switches your equipment on/off, as programmed on the remote (page 41).

Tip

The M/m/</,, 2 +, PROG +, and number 5 buttons have tactile dots. Use the tactile dots as references when operating the TV.

9

GB

Overview of the TV buttons and indicators

1 1 – Power

Switches the TV on or off.

2 PROG +/-/ /

• In TV mode: Selects the next (+) or previous

(-) channel.

• In TV menu: Moves through the options up

() or down ().

3 2 +/-/ /

• Increases (+) or decreases (-) the volume.

• In TV menu: Moves through the options left

( ) or right ( ).

4 / – Input select/OK

• In TV mode (page 21): Selects the input

source from equipment connected to the TV

sockets.

• In TV menu: Selects the menu or option, and

confirm the setting.

5 (page 21)

6 – Picture Off/Timer indicator

• Lights up in green when the picture is

switched off (page 29). Only the picture is

switched off (the sound remains unchanged).

• Lights up in orange when the timer is set

(page 30).

7 1 – Standby indicator

Lights up in red when the TV is in standby mode.

8 " – Power indicator

Lights up in green when the TV is switched on.

9 Remote control sensor

10

GB

1: Checking the

accessories

Remote RM-ED001 (1)

Size AA batteries (R6 type) (2)

Coaxial cable (1)

Mains lead (Type C-6) (1)

Cable holder (1)

Support belt (1) and screws (2)

2: Inserting batteries

into the remote

Notes

• Observe the correct polarity when inserting batteries.

• Dispose of batteries in an environmentally friendly way.

Certain regions may regulate disposal of the battery.

Please consult your local authority.

• Do not use different types of batteries together or mix old

and new batteries.

• Handle the remote with care. Do not drop or step on it, or

spill liquid of any kind onto it.

• Do not place the remote in a location near a heat source, or

in a place subject to direct sunlight, or in a damp room.

Getting Started

Do not remove these ferrite cores.

11

GB

Getting Started

3: Connecting an aerial/VCR

1 Connect your aerial to the socket on the

rear of the TV.

If connecting to an aerial only

Go to step 3.

2 Connect your VCR.

1 Connect the socket on the rear of the TV to

the input socket on your VCR with the RF

lead.

2 Connect the scart socket on your VCR to the

/ 2 scart socket on the rear of the TV

with a scart lead.

3 Connect the supplied mains lead to the AC

IN socket on the rear of the TV.

Note

Do not connect the mains lead to your mains socket until

all connections are complete.

4 Bundle the cable.

1 Attach the cable holder to the rear of the TV

(A), then turn the cable holder a quarter turn

to the left (B).

2 Push the clasp lever in to release the lock and

open the cover, and then insert the cables.

3 Close the cover until it clicks shut and locks.

Coaxial

cable

(supplied)

Scart lead (not supplied)

RF lead

(not supplied)

2-1

2-2

Mains lead

(supplied)

1

VCR

Rear of the TV

3

12

GB

4: Preventing the TV from toppling over

After all connections are completed, secure the TV.

1 Fasten the supplied support belt to the stand with the supplied screw.

2 Fit the supplied support belt to the TV stand, then firmly fasten with the supplied screw using a

screw driver or coin, etc.

3 While supporting the TV, tighten the supplied support belt to adjust the length.

5: Switching on the TV

1 Connect the TV to your mains socket (220-240V AC, 50Hz).

2 Press 1 on the TV (right side).

When you switch on the TV for the first time, the Language menu appears on the screen, then go to “6: Selecting

the language and country/region” on page 13.

When the TV is in standby mode (the

1 (standby) indicator on the TV (front) is red), press TV "/1 on the

remote to switch on the TV.

2

3

1

2

13

GB

Getting Started

6: Selecting the

language and country/

region

When you switch on the TV for the first time, the

Language menu appears on the screen.

1 Press M/m to select the language

displayed on the menu screens, then press

OK.

2 Press M/m to select the country/region in

which you will operate the TV, then press

OK.

If the country/region in which you want to use the

TV does not appear in the list, select “-” instead of

a country/region.

The message confirming the TV start auto-tuning

appears on the screen, then go to “7: Auto-tuning

the TV” on page 14.

PROG

456

78

0

9

OK

DIGITAL ANALOG

123

TV

AUX/VIDEO

MODE

V

C

R

T

V

D

V

D

A

U

X

1,2

14

GB

7: Auto-tuning the TV

After selecting the language and country/region, a

message confirming the TV start auto-tuning appears

on the screen.

You must tune the TV to receive channels (TV

broadcasts). Do the following to search and store all

available channels.

1 Press OK to select “Yes”.

The TV starts searching for all available digital

channels, followed by all available analogue

channels. This may take some time, please be

patient and do not press any buttons on the TV or

remote.

Once all available digital and analogue channels

have been stored, the TV returns to normal

operation, displaying the digital channel stored on

channel number 1. If no digital channels are

found, the analogue channel stored on channel 1 is

displayed.

When a message appears for you to confirm the

aerial connections

No digital or analogue channels are found. Check

all the aerial connections and press OK to start

auto-tuning again.

2 When the Programme Sorting menu

appears on the screen, follow steps 2 to 3

of “Programme Sorting (Analogue mode

only)” (page 32).

If you do not change the order in which the

analogue channels are stored on the TV, go to step

3.

3 Press MENU to exit.

The TV has now tuned in all the available

channels.

3

1

m

Digital auto-tune display

m

Analogue auto-tune display

15

GB

Watching TV

1 Press 1 on the TV (right side) to switch on

the TV.

When the TV is in standby mode (the 1 (standby)

indicator on the TV (front) is red), press TV "/1

on the remote to switch on the TV.

2 Press DIGITAL to switch to digital mode or

ANALOG to switch to analogue mode.

The channels available vary depending on the

mode.

3 Press the number buttons or PROG +/- to

select a TV channel.

To select channel numbers 10 and above using the

number buttons, enter the second and third digits

within two seconds.

To select a digital channel using the Digital

Electronic Programme Guide (EPG), see page 18.

In digital mode

An information banner appears briefly. The

following icons may be indicated on the banner.

Additional operations

Watching TV

3

1

22

3

: Radio service

: Scrambled/Subscription service

: Multiple audio languages available

: Subtitles available

: Subtitles available for the hearing impaired

: Recommended minimum age for current

programme (from 4 to 18 years)

: Parental Lock

: Current programme is being recorded

To Do this

Turn off the TV

temporarily

(Standby mode)

Press TV "/1.

Turn off the TV

completely

Press 1 on the TV (right side).

Adjust the volume Press 2 + (increase)/

- (decrease).

Mute the sound Press %. Press again to restore.

Switch to digital

mode

Press DIGITAL.

Hide interactive

prompts from the

screen (in digital

mode only)

Switch to analogue

mode

Press ANALOG.

Continued

16

GB

To access Text

Press /. Each time you press /, the display changes

cyclically as follows:

Text t Text over the TV picture (mix mode) t No

Text (exit the Text service)

To select a page, press the number buttons or PROG

+/-.

To hold a page, press / .

To reveal hidden information, press / .

Tips

• Ensure that the TV is receiving a good signal, or some text

errors may occur.

• Most TV channels broadcast a Text service. For

information on the use of the service, select the index page

(usually page 100).

• When four coloured items appear at the bottom of the Text

page, Fastext is available. Fastext allows you to access

pages quickly and easily. Press the corresponding

coloured button to access the page.

To access NexTView (depending on

availability of service)

NexTView is an electronic programme guide.

1 When a channel which provides a

NexTView service is selected (“NexTView”

is displayed as soon as the data is

available), press .

2 Press M/m/</, to select the displayed

option, then press OK to confirm.

To turn off NexTView, press again.

1 (All)/ (Entertainment)/ (Children)/

(Art)/ (Sports)/ (News)/ (Movies)/

(Music):

Lists programmes by category.

2 (Only when more than eight channels provide

NexTView):

Creates a channel list. You can store up to eight

channels. To restore the factory setting channels,

select “Auto B”.

3 :

Shows a reminder list (for details, see “5 Info:”).

4 Programmes:

Displays the programme list by time when the TV

receives 50% or less of the NexTView data

(“NexTView” is displayed in orange when a channel

is selected), and displays the programme list by time

and channel when the TV receives more than 50% of

the NexTView data (“NexTView” is displayed in

black when a channel is selected). The percentage

may differ depending on your area.

5 Info:

Displays programme description.

To record the programme (only VCRs which support

SmartLink and Timer Programming features), press

the red button.

To display a reminder message when the programme

is broadcast, press the green button. You can set up

to five programmes.

Notes

• Wrong characters appear on the screen if the language

used in the NexTView does not match the language set on

your TV. Set “Language” to the language used in the

NexTView (page 31). Also set “Country” to the country/

region from which the NexTView programme is broadcast

(page 31).

• “Record” and “Remind” are not available once the

programme has started.

Return to the

previous channel

watched (for more

than five seconds)

Press .

Access the

Programme index

table (in analogue

mode only)

Press OK. To select an analogue

channel, press M/m, then press

OK.

To access the Input signal index

table, see page 21.

To Do this

17

GB

Watching TV

To change the screen mode manually to

suit the broadcast

Press repeatedly to select Wide, Smart, 4:3, 14:9,

or Zoom.

Displays wide screen (16:9) broadcasts in the correct

proportions.

Displays conventional 4:3 broadcasts with an

imitation wide screen effect. The 4:3 picture is

stretched to fill the screen.

Displays conventional 4:3 broadcasts (e.g., non-wide

screen TV) in the correct proportions.

Displays 14:9 broadcasts in the correct proportions.

As a result, black border areas are visible on the

screen.

Displays cinemascopic (letter box format) broadcasts

in the correct proportions.

* Parts of the top and bottom of the picture may be cut off.

Tips

• Alternatively, you can set “Auto Format” to “On”. The TV

will automatically select the best mode to suit the

broadcast (page 27).

• You can adjust the portion of the picture when selecting

Smart, 14:9, or Zoom. Press M/m to move up or down

(e.g., to read subtitles).

Wide

Smart*

4:3

14:9*

Zoom*

18

GB

Checking the Digital Electronic Programme Guide

(EPG)

1 In digital mode, press to display the

Digital Electronic Programme Guide

(EPG).

2 Perform the desired operation, as shown in

the following table.

Note

Programme information will only be displayed if the TV

station is transmitting it.

Digital Electronic Programme

Guide (EPG)

To Do this

Turn off the EPG Press .

Move through the EPG Press M/m/</,.

Display the previous or next six channels Press the red (previous) or green (next) button.

Watch a current programme Press OK while the current programme is selected.

Sort the programme information by

category – Category list

1 Press the blue button.

2 Press M/m/</, to select a category. The category name is

displayed on the side.

The categories available include:

Favourite

Contains all the channels that have been stored in the Favourite list

(page 20).

All Categories

Contains all available channels.

News

Contains all news channels.

3 Press OK.

The Digital Electronic Programme Guide (EPG) now only displays the

current programmes from the category selected.

Set a programme to be recorded – Timer

REC

1 Press M/m/</, to select the future programme you want to

record.

2 Press OK.

3 Press M/m to select “Timer REC”.

4 Press OK to set the TV and your VCR timers.

A symbol appears by that programme’s information. The

indicator on the TV (front) lights up in standby mode.

Notes

• You can set VCR timer recording on the TV only for Smartlink compatible

VCRs. If your VCR is not Smartlink compatible, a message will be displayed to

remind you to set your VCR timer.

• Once a recording has begun, you can switch the TV to standby mode, but do not

switch off the TV completely or the recording may be cancelled.

• If an age restriction for programmes has been selected, a message asking for pin

code will appear on the screen. For more details refer to Parental Lock on

page 37.

19

GB

Watching TV

Set a programme to be displayed

automatically on the screen when it starts

– Reminder

1 Press M/m/</, to select the future programme you want to

display.

2 Press OK.

3 Press M/m to select “Reminder”.

4 Press OK to automatically display the selected programme

when the programme starts.

A c symbol appears by that programme’s information. The indicator

on the TV (front) lights up in standby mode.

Note

If you switch the TV to standby mode, it will automatically turn itself on

when the programme is about to start.

Set the time and date of a programme you

want to record – Manual timer REC

1 Press OK.

2 Press M/m to select “Manual timer REC”.

3 Press M/m to select the date, then press ,.

4 Set the start and stop time in the same way as in step 3.

5 Press M/m to select the channel, then press OK to set the TV

and your VCR timers.

A symbol appears by that programme’s information. The

indicator on the TV (front) lights up in standby mode.

Notes

• You can set VCR timer recording on the TV only for Smartlink compatible

VCRs. If your VCR is not Smartlink compatible, a message will be displayed to

remind you to set your VCR timer.

• Once a recording has begun, you can switch the TV to standby mode, but do not

switch off the TV completely or the recording may be cancelled.

• If an age restriction for programmes has been selected, a message asking for pin

code will appear on the screen. For more details refer to Parental Lock on

page 37.

Cancel a recording/reminder – Timer list

1 Press OK.

2 Press M/m to select “Timer list”.

3 Press M/m to select the programme you want to cancel, then

press OK.

A display appears to confirm that you want to cancel the programme.

4 Press , to select “Yes”, then press OK to confirm.

To Do this

20

GB

Using the Favourite list

To Do this

Create your Favourite list for the first time A message appears asking if you want to add channels to the Favourite list

when you press for the first time.

1 Press OK to select “Yes”.

2 Press M/m to select the channel you want to add, then press

OK.

If there are more than five channels in the list, press the green button for

the next five channels or press the red button for the previous five

channels. If you know the channel number, you can use the number

buttons to directly select a channel.

3 Press OK.

Channels that are stored in the Favourite list are indicated by a

symbol.

Turn off the Favourite list Press .

Move through in the Favourite list Press M/m.

Display the previous or next five channels Press the red (previous) or green (next) button.

See brief details on current programmes Press while selecting a channel. Press again to cancel.

Watch a channel Press OK while selecting a channel.

Add or remove channels in the Favourite

list

1 Press the blue button.

Channels that are stored in the Favourite list are indicated by a

symbol.

2 Press M/m to select the channel you want to add or remove.

If there are more than five channels in the list, press the green button for

the next five channels or press the red button for the previous five

channels. If you know the channel number, you can use the number

buttons to directly select a channel.

3 Press OK.

4 Press the blue button to return to the Favourite list.

Remove all channels from the Favourite list

1 Press the blue button.

2 Press the yellow button.

A display appears to confirm that you want to delete all channels from the

Favourite list.

3 Press < to select “Yes”, then press OK to confirm.

1 In digital mode, press to display the

Favourite list.

A message appears asking if you want to add

channels to the Favourite list when the Favourite

list is blank.

2 Perform the desired operation, as shown in

the following table.

Favourite list

La page charge ...

Sony Bravia KDL-V32A11E Manuel utilisateur

Ce manuel convient également à

Sony Bravia KDL-V32A11E Manuel utilisateur

dans d''autres langues

Documents connexes