English 9
Important safety instructions
Important safety instructions
SAVE THESE INSTRUCTIONS
Read instructions completely and carefully.
Installation of this range must conform with local codes
or, in the absence of local codes, with the National Fuel
Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada,
installation must conform with the current Natural Gas
Installation Code, CAN/CGA-B149.1, or the current Propane
Installation Code, CAN/CGA-B149.2, and with local codes
where applicable. This range has been design-certied by
ETL according to ANSI Z21.1, latest edition, and Canadian
Gas Association according to CAN/CGA-1.1, latest edition.
Do not install this range in a place which is exposed to a
strong draft.
Installation and service must be performed by a qualied
installer, service agency, or gas supplier.
Have the installer show you the location of the gas shut-
off valve and how to shut it off.
Always use NEW exible connectors when installing a gas
appliance. Never reuse old exible connectors. The use of
old exible connectors can cause gas leaks and personal
injury.
GAS WARNINGS
WARNING
If the instructions in this manual are not followed exactly, a
re or explosion may result, causing death, personal injury, or
property damage.
If you smell gas:
1. Close the valve and do not use the range.
2. DO NOT light a match, candle, or cigarette.
3. DO NOT turn on any gas or electric appliances.
4. DO NOT touch any electrical switches or plug a power cord
into an outlet.
5. DO NOT use any phone in your building.
6. Clear the room, building, or area of all occupants.
7. Immediately call your gas supplier from a neighbor’s phone.
Follow the gas supplier’s instructions.
8. If you cannot reach your gas supplier, call the re
department.