Danby DAC100ECB4GDB Le manuel du propriétaire

Marque: Danby

Modèle: DAC100ECB4GDB

Catégorie: Climatiseurs split-system

Taper: Le manuel du propriétaire

OWNER’S USE AND CARE GUIDE

GUIDE D’UTILISATION ET D'ENTRETIEN

02'(/02'Ê/(

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840

2015.12.11

AIR CONDITIONER

CLIMATISEUR

DAC100ECB4GDB

DO NOT RETURN THIS UNIT TO THE RETAILER

WITHOUT FURTHER INSTRUCTIONS

Dear valued customer, we hope your Danby product purchase fulfills all

your requirements. Your satisfaction is our priority!

Please contact us at our toll free consumer service number for any inquiries

you may have about your new unit.

NE PAS RETOURNER CET APPAREIL CHEZ LE

DÉTAILLANT SANS CONSIGNES SUPPLÉMENTAIRES

Cher(ère) client(e) important(e), nous espérons que votre produit Danby

répond à tous vos besoins. Votre satisfaction est notre priorité!

Veuillez nous contacter au numéro gratuit de service après-vente, si

vous avez des questions quelconques à propos de votre nouvel appareil.

NO DEVUELVA ESTA UNIDAD A LA TIENDA SIN

INSTRUCCIONES ADICIONALES

Estimado cliente, esperamos que el producto Danby que ha comprado

satisfaga completamente sus necesidades. Su satisfacción

es nuestra prioridad!

Por favor, contáctenos gratuitamente a nuestro número de Servicio al

Cliente para cualquier pregunta que tenga sobre su nuevo electrodoméstico.

1-800-263-2629

(1-800-26-DANBY)

Danby 28.08.2014

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF

PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE

REFERENCE.

_____________________________________________________________________

POUR OBTENIR LE SERVICE SUR GARANTIE, VOUS DEVEZ FOURNIR UNE

PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE

POUR RÉFÉRENCE FUTURE.

_____________________________________________________________________

This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must

be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and

applicable local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the

responsibility and obligation of the customer to exchange the existing receptacle in accordance with the

National Electrical Code and applicable local codes and ordinances. The third ground prong should not,

under any circumstances, be cut or removed. Never use the cord, the plug or the appliance when they show

any sign of damage. Do not use your appliance with an extension cord unless it has been checked and

tested by a qualiﬁ ed electrician or electrical supplier.

IMPORTANT - GROUNDING METHOD

Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois ﬁ ches. Il doit être

branché dans une prise avec une ﬁ che de mise à la terre en conformité avec le Code national de l’électricité

et les codes et règles locaux applicables. Si la prise murale n’a pas de mise à la terre, il est de la

responsabilité et l’obligation du client de changer la prise existante pour la rendre conforme au Code

national de l’électricité et aux codes et règles locaux applicables. La ﬁ che de mise à la terre ne doit pas, en

aucune circonstance, être coupée ou retirée. Si vous apercevez des signes de dommage, n’utilisez jamais le

cordon d’alimentation, la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été

vériﬁ ée et testée par un électricien qualiﬁ é ou un fournisseur de matériel électrique.

IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

CONTENTS

Model • Modèle

DAC100ECB4GDB

CAUTION:

Read and follow all safety rules and operating

instructions before ﬁ rst use of this product.

TABLE DES MATIÈRES

AVERTISSEMENT :

Veuillez lire attentivement les consignes de

sécurité et les instructions d’utilisation avant

l’utilisation initiale de ce produit.

AIR CONDITIONER

Owner’s Use and Care Guide ................................1-14

• Welcome

• Important Safety Information

• Features

• Installation Instructions

• Operation Instructions

• Care and Maintenance

• Troubleshooting

• Warranty

CLIMATISEUR

Guide d’utilisation et d’entretien............................14-28

• Bienvenue

• Consignes de sécurité importantes

• Caractéristiques

• Consignes d’installation

• Consignes d’utilisation

• Soins et entretien

• Dépannage

• Garantie

WELCOME

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will

ﬁ nd in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best of

all, you will experience these values each and every time you use your Danby appliance. That is important, because your

new appliance will be a part of your family for a long time.

For easy reference, we suggest you attach a copy of your sales slip/receipt to this page, along with the following

information, located on the manufacturer’s nameplate on the right side of the unit above the powercord.

Note the information below; you will need this information to obtain service under warranty.

To receive service, you must provide the original receipt.

NOTE: THIS UNIT IS NOT DESIGNED FOR “THROUGH-THE-WALL” INSTALLATION.

Model No:

Serial No:

Date Purchased:

NEED HELP?

Before you call for service, here are a few things you can do to

help us serve you better:

Read this Owner’s Use and Care Guide:

It contains instructions to help you use and maintain your

appliance properly.

If you received a damaged appliance:

Immediately contact the retailer (or builder) that sold you the

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide

before calling. This section helps you solve common problems

that may occur.

If you do need service, you can relax, knowing help is only a

phone call away.

1-800-26-

(1-800-263-2629

)

(1-800-263-2629)

WARNING

Improper connection of the grounding plug can result in risk of

ﬁ re, electric shock and/or injury to persons associated with the

appliance. Check with a qualiﬁ ed service representative if in doubt

that the appliance is properly grounded.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

FOR YOUR SAFETY: Read these instructions carefully before operating the unit.

1. All wiring must comply with local and national electrical codes and must be installed by a qualiﬁ ed electrician. If you

have any questions regarding the following instructions, contact a qualiﬁ ed electrician.

2. Check available power supply and resolve any wiring problems BEFORE installing and operating this unit.

3. This 115V air conditioner uses 7.5 or less nameplate amps and may be used in any properly wired, general-purpose

household receptacle. See Table 1 for the speciﬁ cations for the individual branch circuit.

4. For your safety and protection, this unit is grounded through the powercord plug when plugged into a matching wall

outlet. If you are not sure whether your wall outlet is properly grounded, please consult a qualiﬁ ed electrician.

5. The wall outlet must match the 3-prong plug on the service cord supplied with the unit. DO NOT use plug adapters.

See Table 2 for receptacle and fuse information.

6. The rating plate on the unit contains electrical and other technical data. The rating plate is located on the right side of

the unit, above the powercord.

ELECTRICAL SPECIFICATIONS

TABLE 1

DAC100ECB4GDB

Suggested Individual Branch Circuit

Nameplate Amps

7.5

*AWG Wire Size

AWG- American Wire Gauge

*Based on copper wire at 60°C temperature rating

TABLE 2

Receptacle and Fuse Types

Rated Volts 125

Amps 15

Wall Outlet

Fuse Size 15

Time Delay Fuse Plug Type

(or Circuit Breaker)

FEATURES

Your appliance is designed to be highly efﬁ cient in energy savings. Follow these recommendations for greater ef-

ﬁ ciency.

1. Select a thermostat setting that suits your comfort needs and leave at that chosen setting.

2. The air ﬁ lter is very efﬁ cient in removing airborne particles. Keep the air ﬁ lter clean at all times (usually cleaned every

2 weeks depending on indoor air quality).

3. Use drapes, curtains or shades to keep direct sunlight from penetrating and heating the room, but do not allow drapes

or curtains to obstruct the air ﬂ ow around the unit.

4. Start your air conditioner before the outdoor air becomes hot, to avoid an initial period of discomfort while the unit is

cooling the room.

5. When outdoor temperatures are cool enough, use the Fan Mode setting. This circulates indoor air, providing some

cooling comfort, and uses less electricity than operating on a Cooling setting.

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

FOR YOUR SAFETY: Read these instructions carefully before operating the unit.

ENERGY SAVING TIPS

Interior Air Inlet

Control Panel

*Fresh Air Ventilation Switch

Interior Air Outlet

(open for Fan only operation, only

available on DAC120)

Air FIlter

Cabinet

Exterior Air Inlet

*Pushed in, means the vent is closed.

Pulled out, means the vent is open.

INSTALLATION INSTRUCTIONS

TOOLS NEEDED FOR INSTALLATION:

• Screwdrivers: Phillips and ﬂ at head.

• Power Drill: 1/8in. (3.2mm) diameter drill bit

• Pencil

• Measuring Tape

• Scissors

• Carpenter’s Level

NOTE: Save the shipping carton and packing materials for future storage or transportation. From

the carton, remove the plastic bag containing the installation hardware kit necessary for the instal-

lation of your air conditioner. Please check the contents of the hardware kit against the corre-

sponding model check list, prior to installation of the unit. See Fig. 1.

ELECTRIC SHOCK HAZARD

To avoid the possibility of personal

injury, disconnect power to the unit

before installing or servicing.

NOTE: Your Room Air Conditioner is designed for easy

installation in a single or double-hung window. This unit

is NOTdesigned for vertical (slider type) windows and/or

through-the-wall applications.

Because the compressor is located on the controls side of the unit (left side), this side

will be heavier and more awkward to manipulate. Inadequate support on the control side

of the unit can result in personal injury and damage to your unit and property. Therefore,

it is recommended that you have someone assist you during the installation of this unit.

CAUTION

INSTALLATION

HARDWARE

1/2in. (13 mm)

screws (7)

Safety Lock (1)

3/8in. (9.5mm) screws

(4) *Factory installed

on some models

“L” Shaped

mounting

bracket (1)

* Factory installed

on some models

Sash bracket (2)

Adhesive

Foam Seal(1)

Side Curtain LH (1)

Side Curtain RH (1)

Regular

Foam Seal(1)

Foam insert

2 pieces

Weather-stripping

(5)

Fig. 1

1. This room air conditioner is designed to ﬁ t easily into a single or double hung window. However, since window designs

vary, it may be necessary to make some modiﬁ cations for safe, proper installation.

2. Make sure window and frame are structurally sound and free from dry and rotted wood.

3. For maximum efﬁ ciency, install the air conditioner on a side of the house or building which favours more shade than

sunlight. If the unit is in direct sunlight, it is advisable to provide an awning over the unit.

4. Provide sufﬁ cient clearance around the cabinet to allow for ample air circulation through the unit (See Fig. 2). The

rear of the unit should be outdoors. It should not be in a garage, or inside a building. Keep unit as far away as possi-

ble from obstacles/obstructions and at least 30 in. (76 cm) above the ﬂ oor or ground. Curtains and other objects within

the room should be prevented from blocking the air ﬂ ow.

5. Be certain that the proper electrical outlet is within reach of the installation. Use only a single outlet circuit rated at 15

amps. All wiring should be in accordance with local and national electrical codes.

6. DO NOT install unit where leakage of combustible gas is suspected. Your air conditioner may fail to operate in air

containing oils (including machine oils), sulﬁ de gas, near hot springs, etc.

NOTE: Your unit is designed to evaporate condensation under normal conditions. However, under extreme humidity con-

ditions, excess condensation may cause basepan to overﬂ ow to the outside. The unit should be installed where conden-

sation run-off cannot drip on pedestrians or neighbouring properties.

NOTE: It is normal for your unit to drip a small amount of water, especially on excessively humid days.

INSTALLATION INSTRUCTIONS

LOCATION

Awning

Fence,

wall, or

other

obstacle

Ground

Side

Obstruction

20 in.

(50.8 cm)

Min

30 in. (76.2 cm)

Min

12 in. (30.5 cm) Min

20 in.

(50.8 cm)

Fig. 2

INSTALLATION INSTRUCTIONS

1. Assembly of the upper channel to the cabinet (factory installed on some units).

• “L” Shaped Top Channel: install the “L” shaped channel to the top of the cabinet as shown in Fig. 3, using four (4)

3/8 in. (9.5 mm) screws.

2. Assembly of the side curtains to the cabinet.

• Extend the shutter from the shutter frame and slide it into the shutter tabs on the side channel of the air conditioner,

as shown in Fig. 4.

• Slide the shutters into the top (“L” shaped) and bottom (“U” shaped) channels. The shutters are identiﬁ ed (on frame)

as left and right.

3/8 in. (9.5 mm)

“L” shaped mounting

bracket

“U” shaped Channel

(Factory Installed)

Fig. 3

Slide down into tabs

Shutter tabs

Shutter

Shutter frame

Fig. 4

3. Completing the installation.

• Cut the foam (non adhesive) sealing strip to ﬁ t the area of the window sill that the air conditioner will rest on.

• Carefully place the air conditioner into the window with the “L” shaped mounting bracket (on top) positioned in front

of the upper window sash. The bottom of the cabinet should be positioned on the “recessed” portion of the window

frame. Pull the window down until it rests just behind the front ﬂ ange of the (top) “L” shaped mounting bracket (See

Fig. 5).

• Expand the shutter frames (fully) on each side and secure the top of the frames to the window sash using one 1/2 in.

(13 mm) screw on each side and one in the “L” shaped mounting bracket (Fig. 5).

• Secure the shutter clamp on each side of the lower part of the shutter, and secure to window sill using one 1/2 in.

(13 mm) screw on each side (Fig. 5).

• Place the second foam sealing strip to ﬁ t the opening between the inside and outside windows, then attach the safety

lock to the outside window frame using one 1/2 in. (13 mm) screw (See Fig. 6).

PLEASE NOTE: Window applications come in a variety of different styles. Therefore, it may be necessary to modify your

particular installation.

Window sash

“L” Shaped

Mounting

Bracket

Shutter clamps

1/2 in. (13mm) screws

Safety Lock

1/2 in. (13 mm) screw

Foam Seal

(adhesive)

Fig. 6Fig. 5

ASSEMBLY AND INSTALLATION

Check that the air conditioner is tilted downwards to the outside, about 3° to 4°, as shown in Fig. 7. After proper installa-

tion, condensed water should not drain from the overﬂ ow drain hole during normal use. If you notice water leaking out,

check the angle of tilt, and make any necessary adjustments. However, on a very humid day, water leakage can occur –

this is normal.

Note: To achieve 3° to 4°, you must measure the H, see ﬁ gure 7.

Measure the tilt angle from the cabinet’s edge. The distance H should be approximately 1 in. to 1 3/8 in. (2.5 cm - 3.5 cm)

for DAC100ECB4GDB.

ASSEMBLY AND INSTALLATION (cont’d)

Fig. 7

Measure the tilt angle from the cabinet’s edge

WINDOW

: approximately 3/4 in. (19 mm) to

1 in. (2.5 cm) for

: approximately 1 in. (2.5 cm) to

1 3/8 in. (3.5 cm) for

DAC080E

DAC100E

INSTALLATION INSTRUCTIONS

4. Installing the Energy Efﬁ cient Foam Insert

• After the unit is installed in the window, measure the width of the side curtain.

• If necessary, cut the foam insert down to the width of the side curtain.

• Slide the foam insert into the side curtain.

• Repeat for the other side. (See below)

NOTE: Apply the supplied weather-stripping where needed (cracks and spaces between the foam insert, window

kit and window frame).





123

456789

11 12 13 14 15 16 17

123

Step 1 Step 3Step 2

OPERATING INSTRUCTIONS

KEY PAD FEATURES

LED DISPLAY: Displays the following information independently - Set Temperature, Ambient RoomTemperature and

Auto Timer On/Off settings.

POWER: Turns unit On/Off. NOTE: The unit will automatically launch the Energy Saver function when it is in Cool,

Dry, and Auto modes.

MODE: Allows you to scroll through and select the desired operating mode: Cool, Dry, Fan Only and *Auto. The

selected mode will be denoted by the adjacent indicator light.

*Auto mode is a pre-set factory program that automatically deﬁ nes the mode (Cool or Dry) and fan speed, based

on the set temperature. The unit will automatically launch the Energy Saver function when it is in Cool, Dry, or Auto

modes.

FAN SPEED: Select from four different fan settings: Low, Medium, High and Auto during Cool and Fan Only mode.

Please note, during Dry mode the fan speed is automatically deﬁ ned.

TEMP/ TIMER

CONTROL

CHECK

FILTER

MODE

SELECTOR

ENERGY

SAVER

LED

DISPLAY

AUTO

TIMER

SLEEP

MODE

FAN

SPEED

POWER

BUTTON

ENERGY SAVER: Automatically cycles the fan on and off while the compressor is not in use. This function

is available in Cool, Dry, and Auto modes (only Auto-Cool and Auto-Fan modes). The fan will continue to run

for 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes at 10 minute intervals,until

the room temperature is above the set temperature. At this point, the compressor turns back on and cooling

restarts.

TEMP / TIMER CONTROL: Used to increase or decrease the Temperature setting in 1°C / 1°F increments,

and Auto-Timer On/Off settings in 30min./1hr. increments. Note: This appliance allows you to select the

temperature scale to be displayed in either “Celsius” or “Fahrenheit” according to your preference.To change

the temperature scale displayed on the electronic display, press both the “Temp/Timer” adjust arrows simulta-

neously to alternate between Celsius and Fahrenheit.

CHECK FILTER: The adjacent indicator light will illuminate as a reminder to clean the air conditioner ﬁ lter

(see page 11). Once the ﬁ lter has been cleaned and replaced, depress the Check Filter button in order to

resume operation.

SLEEP MODE: In this mode, the selected temperature will increase (when in cooling mode) by 1°C / 2°F

one half-hour after Sleep mode has been selected. The temperature will then increase by another 1°C / 2°F

after an additional half hour. This new temperature will be maintained for 6 hours before returning to the

originally selected temperature. This ends the Sleep mode and the unit will continue to operate as originally

programmed. The Sleep mode program can be cancelled at any time during operation by pressing the Sleep

button again.

AUTO-TIMER: Used to initiate the Auto On/ Auto Off timer.

When the air conditioner is off (Auto-On feature):

1) Press the Auto-Timer button once and the adjacent Auto-On indicator light will illuminate.

2) Use the Temp/Timer control cursors to select a delayed ON time of up to 24 hours.

3) Select the appropriate mode under which you want the unit to operate (Auto-Cool-Dry-Fan Only).

4) Select the fan speed setting.

5) The time you selected will appear in the LED display.

When the air conditioner is on (Auto-Off feature):

1) Press the Auto-Timer button twice and the adjacent Auto-Off indicator light will illuminate.

2) Use the Temp/Timer control cursors to select a delayed OFF time of up to 24 hours.

3) The time you selected will appear in the LED display. The Auto-On and Auto-Off timer features can operate

during the same program by deﬁ ning the Auto-Off parameters immediately after the Auto-On parameters.The

Auto-Timer may be cancelled at any time by turning the unit On/Off.

For example, if you want to turn the unit on one hour later, to operate for one hour and then stop, set Auto-On

“1” and Auto-Off “2”.

Note: This is a “one-shot” timer. It does not continue to cycle on and off. It will turn the unit on (if set by the

user) ONE time. It will turn the unit off (if set by the user) ONE time. If you require the unit to turn on/off again

automatically, then you must set the timer again.

OPERATING INSTRUCTIONS

KEY PAD FEATURES (cont’d)

Electronic Display

OPERATING INSTRUCTIONS

USING THE REMOTE CONTROL

Location of the remote controller

• Use the remote controller within a distance of 8 meters from the appliance, pointing it

towards the receiver. Reception is conﬁ rmed by a beep.

• The air conditioner will not operate if curtains, doors or other materials block

the signals from the remote controller to the indoor unit.

• Prevent any liquid from falling into the remote controller. Do not expose the

remote controller to direct sunlight or heat.

• If the infrared signal receiver on the indoor unit is exposed to direct sunlight,

the air conditioner may not function properly. Use curtains to prevent the

sunlight from falling on the receiver.

• If other electrical appliances react to the remote controller, either move these

appliances or call the service depot.

CAUTION

Electronic Display displays the following information:

A: Remote Control power On/OFF and Mode Icons

B: Clock and Auto-Timer settings

C: Current set temperature

D: Fan speed setting control buttons

1. Power switch

Note: The unit will automatically launch the Energy Saver

function when it is in Cool, Dry, and Auto modes.

2. Mode

3. Fan Speed

4. Energy Saver - default setting which allows the fan to cycle on

and off (instead of running continuously) when the compressor

is not in use.

5. Auto-Timer

6. Used to increase or decrease temperature settings in 1° incre-

ments on the Celcius or Fahrenheit scale.

7. Cancels current Timer ON/OFF settings.

8. Lock prevents the remote control settings from inadvertently

being changed.

9. Clock: Depress the button for 3 seconds in order to set the

clock. Press the increase or decrease arrow to adjust the time

in 10 minute intervals.

10. Used to activate the SLEEP program.

11. Toggle the LED backlight on/off.

12. Restore remote control default settings.

NOTE: The clock feature is only available on the remote, the unit

does not have a clock. The remote clock is a 24 hour clock only.

OPERATING INSTRUCTIONS

CHANGING THE BATTERIES ON THE REMOTE

• Protect the remote control from high temperatures, and keep it away from radiation exposure.

• Keep the control panel receiver out of direct sunlight.

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh,etc) batteries.

• The remote operates within a range of 8 meters (26 ft.) from the receiver located inside the main unit. Any obstruction

between the receiver and remote may cause signal interference, limiting the ability to program the main unit.

This Class B digital apparatus complies with the Canadian ICES-003 standard. CAN ICES-3 (B)

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residen-

tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁ cations not approved by the party responsible for FCC compliance could void the user’s authority to

operate the equipment.

This appliance complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This device may not cause harmful interference.

2) This device must accept any interference received, including interference that may cause undesired operation.

Battery replacement:

1. Slide the rear cover on the remote in the direction of the arrow. Continue pulling

(gently) until the cover separates completely from the unit.

2. Insert (2) batteries (AAA) following the same orientation (polarity) depicted inside

the battery chamber (+/-).

3. Re-install rear cover.

4. If the remote control will not be used for extended periods of time (vacations

etc.), batteries should be removed.

To operate the hand-held remote control will require two “AAA” alkaline batteries (included). Batteries should be replaced

when:

a) No signal (beep) is heard when attempting to program the main unit.

b) The main unit does not respond to a command issued by the remote control.

When cleaning the air conditioner be sure to disconnect the power cord from the electrical outlet.

1. DO NOT use gasoline, benzene, thinner, or any other chemicals to clean this unit, as these substances may cause

damage to the ﬁ nish and deformation of plastic parts.

2. Never attempt to clean the unit by pouring water directly over any of the surface areas, as this will cause deterioration

of electrical components and wiring insulation.

If the air ﬁ lter becomes clogged with dust, air ﬂ ow is obstructed and reduces efﬁ ciency. The air ﬁ lter should be cleaned

every 2 weeks.

AIR FILTER REMOVAL:

The air ﬁ lter is located behind the air intake front grill. To remove the air ﬁ lter, grasp the ﬁ lter tab on the right side of the

grill and slide it out to the right. If your air intake front grill has 2 indents, put the grill forward and remove the air ﬁ lter.

To reinstall the air ﬁ lter, reverse the above procedures. The air ﬁ lter must be vacuumed or washed by hand in warm water.

Dry thoroughly before re-installing.

CLEANING AIR FILTER:

1. Use a vacuum cleaner with a soft brush attachment.

2. Wash the ﬁ lter in lukewarm water below 40°C (104°F). To get best results, wash with soapy water or a neutral clean-

ing agent.

3. Rinse the ﬁ lter with clean water and dry thoroughly before re-installing.

1. Operate the fan alone for half a day to dry out the inside of the unit.

2. Turn off power and remove plug from wall socket.

3. Clean ﬁ lter.

4. Store (covered) air conditioner in a dry location.

CLEANING

END OF SEASON CARE

CARE AND MAINTENANCE

IMPORTANT

DO NOT forget to install the air ﬁ lter. If the air conditioner is left to operate without the air

ﬁ lter, dust is not removed from the room air and may result in machine failure. When the

air inlet grill and cabinet are dirty, wipe with lukewarm water (below 40 °C). Use of a mild

detergent is recommended.

CAUTION

When installing and/or removing the air conditioner from the window, ensure that caution

is taken to prevent it from falling backward. It is recommended that installation or removal

of the air conditioner is done with assistance, to prevent injury to persons or damage to the

unit or property.

DISPOSAL

Check for local regulatory compliance regarding the approved and safe disposal of this appliance.

NOTE: In order to avoid electric shock, please turn

off the A/C and unplug the plug before mainte-

nance or repair.

AIR FILTER

Occasionally a problem may arise that is minor in nature, and a service call may not be neccessary. Use this troubleshoot-

ing guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or

Danby’s Toll Free Number 1-800-263-2629 for assistance.

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

Air conditioner will

not operate

• No power to the unit • Check connection of power cord to power

source.

• Check fuse or circuit breaker.

• Set SELECTOR SWITCH to position other than

“OFF”. The power cord “RESET” button must

always be pushed in (engaged) for correct op-

eration.

Inefﬁ cient or no cool-

ing

• Dirty air ﬁ lter • Clean/replace air ﬁ lter

• Unit size inappropriate for application • Check with dealer to determine proper unit ca-

pacity for application

• Blocked air ﬂ ow • Remove obstruction from grill or outdoor louvres

• Power interruption, settings changed

too quickly, or compressor overload

tripped

• Turn the unit off and wait 5 minutes before at-

tempting to restart

Noisy unit • Loose parts • Tighten loose parts

• Inadequate support • Provide additional support to unit

Odors • Formation of mold, mildew, or algae

on wet surfaces

• Clean unit thoroughly

• Place algaecide tablet in base pan

Water dripping

outside

• Hot and humid weather • Condensation run-off is normal under these

conditions.

Water dripping inside • Unit is not properly angled to allow

water to drain outside

• Unit must be installed on an angle for proper

condensation run-off. Check the unit and make

any adjustments.

• It is an extremely humid day • On an extremely humid day, this effect is expect-

ed. No action required.

Ice or frost build-up • Low outside temperature • When outdoor temperature is approximately

18.3°C (65°F) or below, frost may form when

unit is in cooling mode. Switch unit to FAN (only)

operation until frost melts.

• Unit air ﬁ lter is dirty • Remove and clean ﬁ lter

NOTES:

1. If circuit breaker is tripped repeatedly, or fuse is blown more than once, contact a qualiﬁ ed technician.

2. When the unit is installed using proper installation steps, the unit is properly tipped toward the outdoors to allow for

condensation run-off.

LIMITED IN-HOME APPLIANCE WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating

conditions intended by the manufacturer.

This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby Products Inc. (U.S.A.) (hereafter

“Danby”) or by an authorized distributor of Danby, and is non-transferable.

TERMS OF WARRANTY

Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.

First Year

During the rst twelve (12) months, any functional parts of this product found to be defective, will be repaired or replaced, at warrantor’s

option, at no charge to the ORIGINAL purchaser.

To obtain

Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app liance

Service

requiring service outside the limited boundaries of “In Home Service” , it will be the consumer’s responsibility to transport the appliance (at

their own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv ice” below.

Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service

must be performed by a qualied service technician.

If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli cation, all

obligations of Danby under this warranty shall be void.

Boundaries of

If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit must be

In Home Service

delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualied and certif ied for

warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are t he

responsibility of the purchaser.

Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other c ontents of this appliance, whether due

to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, Danby, there are no other warranties, conditions, representations or guarantees, express or implied, m ade or intended by Danby or its

authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditio ns, representations or guarantees

under any Sale of Goods Act or like legislation or statue is hereby expressly excluded. Save as herein provided, Danby shall no t be responsible for any damages

to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o f the unit and by the purchase of

the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for damages to persons or propert y caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

1) Power failure.

2) Damage in transit or when moving the appliance.

3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.

4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating con ditions

(extremely high or low room temperature).

5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).

6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, oods etc.

7) Service calls resulting in customer education.

8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out door application).

Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is required, present this document to our

AUTHORIZED SERVICE DEPOT.

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

Danby Products Inc.

PO Box 669, Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

04/09

1-800-263-2629

Warranty Service

In-home

If the appliance is installed in a location that is 100 kilometres (62 miles) or more from the nearest

service centre your unit must be delivered to the nearest authorized Danby Service Depot, as service

must only be performed by a technician qualified and certified for warranty service by Danby. Transpor-

tation charges to and from the service location are not protected by this warranty and are the responsi-

bility of the purchaser.

During the first twelve (12) months, any functional parts of this product found to be defective, will be

repaired or replaced, at warrantor’s option, at no charge to the ORIGINAL purchaser.

Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized

Service Depot. Any appliance requiring service outside the limited boundaries of “In Home Service” ,it

will be the consumer’s responsibility to transport the appliance (at their own expense) to the original

retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Service” below.

Contact your dealer from whom your unit was purchased, or contact your nearest authorized Danby

service depot, where service must be performed by a qualified service technician. If service is performed

on the units by anyone other than an authorized service depot, or the unit is used for commercial

application, all obligations of Danby under this warranty shall be void.

First year

To obtain

service

Boundaries of

in-home service

LIMITED IN-HOME APPLIANCE WARRANTY

This quality product is warranted to be free from manufacturer’s defects in material and workmanship, provided that the unit is

used under the normal operating conditions intended by the manufacturer.

This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or

Danby Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby, and is non-transferable.

TERMS OF WARRANTY

Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.

Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other

contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.

EXCLUSIONS

Save as herein provided, by Danby, there are no other warranties, conditions, representations or guarantees, express or

implied, made or intended by Danby or its authorized distributors and all other warranties, conditions, representations or

guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation

or statute is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages to persons

or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit

and by the purchase of the unit, the purchaser does hereby agree to indemnify and hold harmless Danby from any claim for

damages to persons or property caused by the unit.

GENERAL PROVISIONS

No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

1) Power failure.

2) Damage in transit or when moving the appliance.

3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.

4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating

conditions (extremely high or low room temperature).

5) Use for commercial or industrial purposes (i.e., If the appliance is not installed in a domestic residence).

6) Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.

7) Service calls resulting in customer education.

8) Improper Installation (i.e., building-in of a free standing appliance or using an appliance outdoors that is not approved for

outdoor application). Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event

warranty service is required, present this document to our AUTHORIZED SERVICE DEPOT.

Warranty Service

In-home

Danby Products Limited

PO Box 1778, Guelph, Ontario, Canada N1H 6Z9

Telephone: (519) 837-0920 FAX: (519) 837-0449

Danby Products Inc.

PO Box 669, Findlay, Ohio, U.S.A. 45840

Telephone: (419) 425-8627 FAX: (419) 425-8629

1-800-263-2629

07/14

BIENVENUE

Bienvenue dans la famille Danby. Nous sommes ﬁ ers de la qualité de nos produits et nous croyons fermement au service

par une assistance ﬁ able. Vous le découvrirez à la lecture de ce guide facile d’utilisation et vous en aurez la conﬁ rmation

par notre service d’assistance à la clientèle. Mais ce qui est encore mieux, vous pourrez bénéﬁ cier de ces avantages à

chaque utilisation de votre appareil. Ceci est important parce que votre nouvel appareil fera partie de votre famille pour

longtemps.

À titre de référence, vous pouvez agrafer à cette page une copie de votre ﬁ che d’achat de l’appareil. Inscrivez les rensei-

gnements suivants fournis (sur la plaque signalétique du fabricant sur le côté droit de l’appareil au-dessus du cordon

d’alimentation).

Veuillez noter les informations ci-dessous; ces renseignements seront nécessaires si votre appareil a besoin

d’entretien ou pour les demandes de renseignements généraux. Pour bénéﬁ cier d’une opération de maintenance

ou de dépannage, le reçu original sera exigé.

REMARQUE : CET APPAREIL N’A PAS ÉTÉ CONÇU POUR UNE INSTALLATION À TRAVERS UNE PAROI MURALE.

Numéro de modèle :

Numéro de série :

Date d’achat :

BESOIN D’ASSISTANCE ?

Veuillez trouver quelques conseils avant de faire appel à nos

services, cela nous aidera à mieux vous servir :

Lisez ce guide :

Il comprend des instructions pour l’utilisation et l’entretien

adapté de votre appareil.

Si votre nouvel appareil est endommagé :

Contactez immédiatement le revendeur (ou le fabricant).

Gagnez du temps et de l’argent :

Avant de faire appel à nos services, consultez à nouveau

la section « Dépannage ». Cette section vous aidera à

résoudre des problèmes courants.

Si une réparation est nécessaire, ne vous inquiétez pas, la

solution est au bout du ﬁ l.

1-800-26-

(1-800-263-2629)

AVERTISSEMENT :

Une ﬁ che de mise à la terre mal branchée peut entraîner un risque d’incendie, de

choc électrique ou de blessures aux personnes qui utilisent l’appareil. Si vous

n’êtes pas certain que l’appareil est correctement mis à la terre, consultez un

préposé du service qualiﬁ é.

Consignes de sécurité importantes

LISEZ TOUTE L’INFORMATION DE SÉCURITÉ AVANT UTILISATION

POUR VOTRE SÉCURITÉ : Lire attentivement ces instructions avant d’utiliser l’appareil.

1. Tous les câblages doivent être conformes aux codes électriques locaux et nationaux et doivent être installés par un

électricien qualiﬁ é. Si vous avez la moindre question au suject des instructions ci-dessous, contactez un électricien

qualiﬁ é.

2. Vériﬁ ez la fourniture d’alimentation électrique disponible et résolvez tout problème de câblage AVANT d’installer et de

faire fonctionner cet appareil.

3. Ce climatiseur de 115V utilise 7.5 ampères ou moins de puissance nominale et peut être utilisé dans toute prise de

courant domestique d’usage général adéquatement câblée. Reportez-vous au Tableau 1 pour les spéciﬁ cations con-

cernant le circuit de dérivation individuel.

4. Pour votre sécurité et votre protection, cet appareil est mis à la terre par la ﬁ che du cordon d’alimentation lorsqu’elle

est branchée dans une prise murale qui lui correspond. Si vous n’êtes pas certain que votre prise de courant murale

est mise à la terre adéquatement, veuillez consulter un électricien qualiﬁ é.

5. La prise murale doit correspondre à la ﬁ che à 3 broches sur le cordon de service fourni avec l’appareil. N’utilisez PAS

de ﬁ ches d’adaptation. Voir le Tableau 2 pour les renseignements sur les prises de courant et les fusibles.

6. La plaque signalétique sur l’appareil contient des données électriques et techniques; elle se trouve sur le côté droit de

l’appareil, au-dessus du cordon d’alimentation.

SPÉCIFICATIONS ÉLECTRIQUES

TABLEAU 1

DAC100ECB4GDB

Circuit de distribution individuel suggéré

Ampères de puissance

nominale

7,5

Calibre de ﬁ l AWG*

AWG – American Wire Gauge

(Calibre de ﬁ l américain)

*Basé sur le ﬁ l en cuivre à une température nominale

de 60 °C

TABLEAU 2

Types de fusibles et de réceptacles

Tension nominale 125

Ampères 15

Prise de courant

Intensité de fusible 15

La page est en cours de chargement...

Danby DAC100ECB4GDB Le manuel du propriétaire

Marque: Danby

Modèle: DAC100ECB4GDB

Catégorie: Climatiseurs split-system

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: Danby DAC100ECB4GDB Owner's manual

Danby DAC100ECB4GDB Le manuel du propriétaire

Danby DAC100ECB4GDB Le manuel du propriétaire

dans d''autres langues

Documents connexes