The PT00170793 Secure RFID Reader has been granted modular approval for mobile applications. The RFID module

D. Devices incorporating PT00170793 Secure RFID Reader for US applications must include an external, visible,

permanent marking or label which states the following:

E. Devices incorporating PT00170793 Secure RFID Reader must include the following information in product

labeling for US and Canada applications:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must

A. The final host with module integrated must be evaluated against CA ICES-003 for unintentional radiators.

B. The final host with the module integrated is to be evaluated for spurious emissions to ensure the final

configuration continues to be compliant with the ISED limits.

D. Devices incorporating PT00170793 Secure RFID Reader for Canada applications must include an external,

visible, permanent marking or label which states the following:

E. Devices incorporating RFID module PT00170793 must include the following information in product labeling for US

and Canada applications:

Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage ; 2.

L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en

compromettre le fonctionnement.

To ensure compliance with ISED RF exposure requirements this device must be installed to provide a minimum of

20cm between the device and people.

Pour garantir la conformité aux exigences d’exposition RF de la d’ISED Canada, cet appareil doit être installé de

manière à laisser un minimum de 20 cm entre l’appareil et les personnes.