AEG FSK93705P Manuel utilisateur
- Catégorie
- Lave-vaisselle
- Taper
- Manuel utilisateur
CONTENTS
1. SAFETY INFORMATION.............................................................................................2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. PRODUCT DESCRIPTION...........................................................................................6
4. CONTROL PANEL....................................................................................................... 7
5. PROGRAMMES............................................................................................................7
6. SETTINGS.....................................................................................................................9
7. OPTIONS....................................................................................................................11
8. BEFORE FIRST USE................................................................................................... 13
9. DAILY USE..................................................................................................................15
10. HINTS AND TIPS..................................................................................................... 17
11. CARE AND CLEANING.......................................................................................... 18
12. TROUBLESHOOTING.............................................................................................21
13. TECHNICAL INFORMATION................................................................................. 24
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
www.aeg.com
2
manufacturer is not responsible for any injuries or
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
1.1 Children and vulnerable people safety
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
• Children between 3 and 8 years of age and persons
with very extensive and complex disabilities shall be
kept away unless continuously supervised.
• Children of less than 3 years of age should be kept
away unless continuously supervised.
• Do not let children play with the appliance.
• Keep detergents away from children.
• Keep children and pets away from the appliance when
the door is open.
• Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
1.2
General Safety
• This appliance is intended to be used in household
and similar applications such as:
– farm houses; staff kitchen areas in shops, offices
and other working environments;
– by clients in hotels, motels, bed & breakfast and
other residential type environments.
• Do not change the specification of this appliance.
• The operating water pressure (minimum and
maximum) must be between 0.5 (0.05) / 8 (0.8) bar
(MPa)
• Obey the maximum number of 15 place settings.
ENGLISH
3
• If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
• Put the cutlery in the cutlery basket with the sharp
ends pointing down or put them in the cutlery drawer
in a horizontal position with the sharp edges down.
• Do not leave the appliance with the open door
unattended to avoid stepping accidentally onto it.
• Before any maintenance operation, deactivate the
appliance and disconnect the mains plug from the
socket.
• Do not use high pressure water sprays and/or steam
to clean the appliance.
• If the appliance has ventilation openings in the base,
they must not be covered e.g. by a carpet.
• The appliance is to be connected to the water mains
using the new supplied hose-sets. Old hose sets must
not be reused.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• Follow the installation instructions
supplied with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
• Make sure that the appliance is
installed below and adjacent to safe
structures.
2.2 Electrical connection
WARNING!
Risk of fire and electric
shock.
• The appliance must be earthed.
• Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
• Always use a correctly installed
shockproof socket.
• Do not use multi-plug adapters and
extension cables.
• Make sure not to cause damage to
the mains plug and to the mains
cable. Should the mains cable need
to be replaced, this must be carried
out by our Authorised Service Centre.
• Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
www.aeg.com
4
• Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
• This appliance complies with the
E.E.C. Directives.
• UK and Ireland only. This appliance is
fitted with a 13 A mains plug. If it is
necessary to change the mains plug
fuse, use only a 13 A ASTA (BS 1362)
fuse.
2.3 Water connection
• Do not cause damage to the water
hoses.
• Before connection to new pipes,
pipes not used for a long time, where
repair work has been carried out or
new devices fitted (water meters,
etc.), let the water flow until it is clean
and clear.
• Ensure that there are no visible water
leaks during and after the first use of
the appliance.
• The water inlet hose has a safety valve
and a sheath with an inner mains
cable.
WARNING!
Dangerous voltage.
• If the water inlet hose is damaged,
immediately close the water tap and
disconnect the mains plug from the
mains socket. Contact the Authorised
Service Centre to replace the water
inlet hose.
2.4 Use
• Do not sit or stand on the open door.
• Dishwasher detergents are
dangerous. Obey the safety
instructions on the detergent
packaging.
• Do not drink and play with the water
in the appliance.
• Do not remove the dishes from the
appliance until the programme is
complete. Some detergent may
remain on the dishes.
• The appliance can release hot steam
if you open the door while a
programme operates.
• Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
2.5 Internal lighting
WARNING!
Risk of injury.
• This appliance has an internal lamp
that comes on when you open the
door and goes off when the door is
closed.
• The type of lamp used for this
appliance is for household appliances
only. Do not use it for house lighting.
• To replace the internal lighting,
contact the Authorised Service
Centre.
2.6 Service
• To repair the appliance contact an
Authorised Service Centre.
• Use original spare parts only.
2.7 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent
children and pets to get closed in the
appliance.
ENGLISH
5
3. PRODUCT DESCRIPTION
5
4
10
9
67
11
12
2
3
1
8
1
Top spray arm
2
Upper spray arm
3
Lower spray arm
4
Filters
5
Rating plate
6
Salt container
7
Air vent
8
Rinse aid dispenser
9
Detergent dispenser
10
Lower basket
11
Upper basket
12
Cutlery drawer
3.1 TimeBeam
TimeBeam displays the following
information on the floor below the
appliance door:
• The programme duration when the
programme begins.
• 0:00 and CLEAN when the
programme is completed.
• DELAY and the countdown duration
when the delay start begins.
• An alarm code when the appliance
has a malfunction.
www.aeg.com6
When AirDry is activated
during the drying phase, the
projection on the floor may
not be completely visible. To
check the remaining time of
the running programme,
look at the control panel
display.
4. CONTROL PANEL
1 2 3 4
6 5
1
On/off button
2
Navigation button (up)
3
Display
4
Option button
5
OK button
6
Navigation button (down)
4.1 Button behaviour
Navigation buttons (up and down)
• Use these buttons to scroll the lists
and information texts on the display.
Option button
• Short press to open the option list.
• Short press in the option list to return
to the programme list.
• Short press in the settings list to
return to the option list.
• Long press (3 sec.) when a delay start
or a programme is running to cancel
the delay start, the programme and
options. The display shows the default
programme: ECO 50°.
OK button
• Short press to confirm the selection of
the programme, options and settings.
• Long press (3 sec.) to start the
MyFavourite programme. If no
programme has been saved, the
display shows: Set MyFavourite.
5. PROGRAMMES
Programme Degree of soil
Type of load
Programme phases Options
ECO 50°
1)
• Normal soil
• Crockery and cut-
lery
• Prewash
• Wash 50 °C
• Rinses
• Dry
• Extra Hygiene
• XtraDry
ENGLISH 7
Programme Degree of soil
Type of load
Programme phases Options
AutoSense
45°-70°
2)
• All
• Crockery, cutlery,
pots and pans
• Prewash
• Wash from 45 °C
to 70 °C
• Rinses
• Dry
• Extra Hygiene
• XtraDry
ProZone 50°-65°
3)
• Mixed soil
• Crockery, cutlery,
pots and pans
• Prewash
• Wash 50 °C and
65 °C
• Rinses
• Dry
• TimeSaver
• XtraDry
Pro 70°
4)
• Heavy soil
• Crockery, cutlery,
pots and pans
• Prewash
• Wash 70 °C
• Rinses
• Dry
• Extra Hygiene
• TimeSaver
• XtraDry
30 Minutes 60°
5)
• Fresh soil
• Crockery and cut-
lery
• Wash 60 °C
• Rinses
• Extra Hygiene
• XtraDry
Glass 45°
6)
• Normal or light
soil
• Delicate crockery
and glassware
• Wash 45 °C
• Rinses
• Dry
• XtraDry
Extra Silent
7)
• Normal soil
• Crockery and cut-
lery
• Prewash
• Wash 50 °C
• Rinses
• Dry
• XtraDry
Prewash
8)
• All • Prewash
1)
This programme offers the most efficient use of water and energy consumption for crockery and cut-
lery with normal soil. This is the standard programme for test institutes.
2)
The appliance senses the degree of soil and the quantity of items in the baskets. It automatically ad-
justs the temperature and quantity of water as well as the wash duration.
3)
This programme is suitable for washing a load with mixed soil. Place items with heavy soil in the lower
basket and with normal soil in the upper basket. The pressure and temperature of the water in the lower
basket are higher than in the upper basket.
4)
This programme is designed to wash heavily soiled items with high water pressure and at a high tem-
perature.
5)
This programme is suitable for washing a load or a half load with fresh or light soil in a short time.
6)
This programme controls the temperature of the water to provide special care for delicate items,
glassware in particular.
7)
This is the most silent programme. The wash pump works at a very low speed to reduce the noise
generated by the appliance. Due to the low speed, the programme duration is long.
8)
With this programme, you can quickly rinse off food remains from dishes and prevent odours forming
in the appliance. Do not use detergent with this programme.
www.aeg.com
8
5.1 Consumption values
Programme
1)
Water
(l)
Energy
(kWh)
Duration
(min)
ECO 50° 11 0.857 235
AutoSense 45°-70° 8 - 15 0.7 - 1.7 46 - 170
ProZone 50°-65° 14 - 16 1.2 - 1.5 160 - 180
Pro 70° 12.5 - 14.5 1.4 - 1.7 170 - 190
30 Minutes 60° 10 0.9 30
Glass 45° 12 - 14 0.8 - 1.0 82 - 92
Extra Silent 12 - 13 1.1 - 1.3 230 - 250
Prewash 4 0.1 14
1)
The pressure and the temperature of the water, the variations of the mains supply, the options and the
quantity of dishes can change the values.
5.2 Information for test
institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
In your request please include the
product number code (PNC) found on
the rating plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
6. SETTINGS
6.1 Setting list
Settings Values Description
Set MyFavourite List of programmes Set your favourite daily pro-
gramme. Refer to specific in-
formation provided in this
chapter.
AirDry ON
OFF
Set the automatic opening
of the door during the drying
phase. Refer to specific infor-
mation provided in this
chapter.
Factory setting: ON.
End sound ON
OFF
Set the acoustic signal that
sounds when the pro-
gramme is complete.
Factory setting: OFF.
ENGLISH 9
Settings Values Description
Key tones Click
Beep
Off
Set the sound of the buttons
when pressed.
Volume From level 1 to level 10 Adjust the sound volume.
Brightness From level 0 to level 9 Adjust the brightness of the
display.
Contrast From level 0 to level 9 Adjust the contrast of the
display.
Water hardness From level 1 to level 10 Adjust the level of the water
softener according to the
water hardness in your area.
Factory setting: level 5.
Rinse aid level From level 0 to level 6
Level 0 = no release of
rinse aid
Adjust the released quantity
of the rinse aid according to
the required dosage.
Factory setting: level 4.
Languages List of languages Set the preferred language.
Default language: English.
Display on floor List of colours
None
Set the colour of the Time-
Beam or deactivate the
TimeBeam.
Reset settings Reset
Cancel
Reset the appliance to the
factory settings.
6.2 How to change a setting
with 2 values (ON and OFF)
Saved settings remain valid until you
change them again.
1. Press .
The display shows the option list.
2. Select Settings and press .
The display shows the setting list.
3. Select a setting and press
to
change the setting value.
• The setting value changes from
ON to OFF or vice versa.
• The display remains in the
settings list.
4. Press repeatedly until the display
shows the programme list.
6.3 How to change a setting
with multiple values
Saved settings remain valid until you
change them again.
1. Press
.
The display shows the option list.
2. Select Settings and press .
The display shows the setting list.
3. Select a setting and press
to
enter the setting.
4.
Use and to change the
setting value.
5. Press to save the setting.
The display returns to the setting list.
6. Press
repeatedly until the display
shows the programme list.
www.aeg.com
10
6.4 How to save the
MyFavourite programme
You can save your favourite programme
along with applicable options. It is not
possible to save the MyFavourite
programme with the Delay option.
You can save one programme at a time.
A new setting cancels the previous one.
1. Press .
The display shows the option list.
2. Select Settings and press
.
The display shows the setting list.
3. Select Set MyFavourite and press
.
The display shows the programme list.
4. Select a programme and press .
The display shows two values.
• Add option: select the value to
add an option to the programme.
• Done: select the value to save the
programme without options or to
finish adding options to the
programme.
5. Press .
If the programme is applicable to the
TimeSaver option, the display shows two
values with corresponding programme
durations.
• Fast: select the value to activate
TimeSaver.
• Normal: select the value to
deactivate TimeSaver.
6. Press
to confirm.
The display confirms that the
MyFavourite programme is saved.
6.5 AirDry
AirDry improves the drying results with
less energy consumption.
During the drying phase, the
door opens automatically
and remains ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
opening. This can cause
damage to the appliance.
If, afterwards, the door is
closed for another 3
minutes, the running
programme ends.
AirDry is automatically activated with all
programmes excluding Prewash (if
applicable).
To improve the drying performance refer
to the XtraDry option or activate AirDry.
CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
7. OPTIONS
Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Activating options can affect
the water and energy
consumption as well as the
programme duration.
ENGLISH 11
7.1 Option list
Options Values Description
Delay From 1 to 24 hours
OFF (default value)
Delays the start of a pro-
gramme.
XtraDry ON
OFF (default value)
Boosts the drying perform-
ance. Refer to specific infor-
mation provided in this
chapter.
Extra Hygiene ON
OFF (default value)
Ensures better hygiene re-
sults by keeping the temper-
ature at 70 °C for at least 10
minutes during the last rins-
ing phase.
Settings Shows the appliance settings
7.2 How to set an option
The option list shows only the options
that are applicable to the selected
programme.
Not all options are compatible with each
other. If you select options that are not
compatible, the appliance automatically
deactivates one or more of them. The
display informs which options are
deactivated.
When the programme is complete or
cancelled, the options are set to the
default values.
1. Select a programme.
2. Press .
The display shows applicable options.
3. Select an option.
The display shows the default option
value in parenthesis.
4. Press
to change the value from
OFF to ON or vice versa.
If you select Delay and press , the
display shows the number of hours
available for the delay start. Select the
desired delay time and press
to
confirm.
5. Press
repeatedly until the display
shows the selected programme.
7.3 XtraDry
Activate this option to boost the drying
performance.
XtraDry is a permanent option for all
programmes other than ECO 50°. It is
automatically activated in next cycles.
This configuration can be changed at any
time.
Every time ECO 50° is
activated, XtraDry is off and
needs to be chosen
manually.
Activating XtraDry deactivates TimeSaver
and vice versa.
7.4 TimeSaver
TimeSaver allows to reduce the duration
of a selected programme by
approximately 50%.
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The washing results are the same as with
the normal programme duration. The
drying results can decrease.
Activate TimeSaver the following way:
Select a programme and press
.
www.aeg.com
12
If TimeSaver is applicable to the selected
programme, the display shows two
values with corresponding programme
durations.
• Fast: select the value to activate
TimeSaver and press to
confirm.
• Normal: select the value to
deactivate TimeSaver and press
to confirm.
Activating TimeSaver deactivates XtraDry
and vice versa.
8. BEFORE FIRST USE
When you activate the appliance for the
first time, you need to set the language.
The default language is English.
1. Set the language.
• Press to confirm English.
• Select a different language and
press
to confirm.
2. Make sure that the current level of
the water softener agrees with the
hardness of the water supply. If
not, adjust the level of the water
softener.
3. Fill the salt container.
4. Fill the rinse aid dispenser.
5. Open the water tap.
6. Start a programme to remove any
residuals from the manufacturing
process. Do not use detergent and
do put dishes in the baskets.
After starting the programme, the
appliance recharges the resin in the
water softener for up to 5 minutes. The
washing phase starts only after this
procedure is complete. The procedure is
repeated periodically.
8.1 The water softener
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
Water hardness
German de-
grees (°dH)
French degrees
(°fH)
mmol/l Clarke de-
grees
Water softener lev-
el
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
ENGLISH 13
German de-
grees (°dH)
French degrees
(°fH)
mmol/l Clarke de-
grees
Water softener lev-
el
<4 <7 <0.7 < 5
1
2)
1)
Factory setting.
2)
Do not use salt at this level.
Regardless of the type of detergent
used, set the proper water hardness
level to keep the salt refill notification
active.
Multi-tabs containing salt
are not effective enough to
soften hard water.
8.2 The salt container
CAUTION!
Use rough salt designed for
dishwashers only. Fine salt
increases the risk of
corrosion.
The salt is used to recharge the resin in
the water softener and to assure good
washing results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt
container (only for the first time).
3. Fill the salt container with dishwasher
salt (until it is full).
4. Carefully shake the funnel by its
handle to get the last granules
inside.
5. Remove the salt around the opening
of the salt container.
6.
Turn the cap of the salt container
clockwise to close the salt container.
CAUTION!
Water and salt can come out
of the salt container when
you fill it. After you fill the
salt container, immediately
start a programme to
prevent corrosion.
When the salt container
needs refilling, the display
shows the related message.
8.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
www.aeg.com
14
How to fill the rinse aid
dispenser
A
B
C
CAUTION!
Only use rinse aid designed
specifically for dishwashers.
1. Open the lid (C).
2. Fill the dispenser (B) until the rinse
aid reaches the marking ''MAX''.
3. Remove the spilled rinse aid with an
absorbent cloth to prevent excessive
foam formation.
4. Close the lid. Make sure that the lid
locks into position.
Fill the rinse aid dispenser
when the indicator (A) is
clear.
When the rinse aid
dispenser needs refilling, the
display shows the related
message.
If you use multi-tablets and the drying
performance is satisfactory, the message
about refilling the dispenser can be
disabled by setting the rinse aid level to
0.
We recommend to always
use rinse aid for better
drying performance, also in
combination with multi-
tablets containing rinsing
agent.
9. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance.
• Fill the salt container if the display
shows the related message.
• Fill the rinse aid dispenser if the
display shows the related
message.
3. Load the baskets.
4. Add the detergent.
5. Set and start a programme suitable
for the type of load and the degree
of soil.
9.1 Using the detergent
A
B
C
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1.
Press the release button (A) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (B).
ENGLISH
15
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
9.2 Setting and starting a
programme
How to start a programme
1. Press the on/off button to activate
the appliance.
The display shows the programme list.
2. Select a programme. ECO 50° is
always the default programme.
3. Set applicable options if desired.
Once you set options, return to the
programme list.
4. Press
.
If the programme is applicable to the
TimeSaver option, the display shows two
values with corresponding programme
durations.
• Fast: select the value to activate
TimeSaver and press to
confirm.
• Normal: select the value to
deactivate TimeSaver and press
to confirm.
5. Close the appliance door to start the
programme.
How to start the MyFavourite
programme
1. Press and hold for about 3
seconds until the display shows the
MyFavourite programme.
2. Close the appliance door to start the
programme.
How to delay the start of a
programme
It is not possible to set the delay start of
the MyFavourite programme.
1. Select a programme.
2. Press .
The display shows the option list.
3.
Select Delay and press .
The display shows the number of hours
available for the delay start (from 1 to 24).
4. Select the desired number of hours
and press to confirm.
The display returns to the option list.
5. You can set other applicable options.
6. Press repeatedly until the display
shows the selected programme.
7. Press
to confirm the
programme selection.
8. Close the appliance door to start the
countdown.
When the countdown is completed, the
programme starts.
How to cancel the delay start
while the countdown operates
The programme and options are set to
their default values when you cancel the
delay start.
1. Open the appliance door.
2. Press and hold for about 3
seconds. The display shows: Stop
washing? and two values.
• Stop: select the value to cancel
the delay start. Press
to
confirm.
• Resume: select the value to
resume the countdown. Press
to confirm. Close the
appliance door.
How to cancel the running
programme
1. Open the appliance door.
2. Press and hold for about 3
seconds. The display shows: Stop
washing? and two values.
• Stop: select the value to cancel
the running programme. Press
to confirm.
• Resume: select the value to
resume the running programme.
Press to confirm. Close the
appliance door.
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
www.aeg.com
16
Opening the door while the
appliance operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the
door, the appliance continues from the
point of interruption.
If the door is opened for
more than 30 seconds
during the drying phase, the
running programme ends. It
does not happen if the door
is opened by AirDry
function.
End of the programme
When the programme is complete, the
TimeBeam displays 0:00 and CLEAN.
1. Press the on/off button or wait for
the Auto Off function to
automatically deactivate the
appliance. If you open the door
before the activation of Auto Off, the
appliance is automatically
deactivated.
2. Close the water tap.
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
10. HINTS AND TIPS
10.1 General
Follow the hints below to ensure optimal
cleaning and drying results in daily use
and to help you protect the environment.
• Remove larger residues of food from
the dishes into the waste bin.
• Do not pre-rinse dishes by hand.
When needed, select a programme
with a prewash phase.
• Always use the whole space of the
baskets.
• Make sure that items in the baskets
do not touch or cover each other.
Only then can the water completely
reach and wash the dishes.
• You can use dishwasher detergent,
rinse aid and salt separately or you
can use the multi-tablets (e.g. ''All in
1''). Follow the instructions on the
packaging.
• Select a programme according to the
type of load and the degree of soil.
ECO 50° offers the most efficient use
of water and energy consumption.
10.2 Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
• In areas with hard and very hard water
we recommend to use plain
dishwasher detergent (powder, gel,
tablets containing no additional
agents), rinse aid and salt separately
for optimal cleaning and drying
results.
• At least once a month run the
appliance with the use of appliance
cleaner which is particularly suitable
for this purpose.
• Detergent tablets do not fully dissolve
with short programmes. To prevent
detergent residues on the tableware,
we recommend that you use the
tablets with long programmes.
• Do not use more than the correct
quantity of detergent. Refer to the
instructions on the detergent
packaging.
ENGLISH
17
10.3 What to do if you want to
stop using multi-tablets
Before you start to use separately
detergent, salt and rinse aid, complete
the following steps:
1. Set the highest level of the water
softener.
2. Make sure that the salt and rinse aid
containers are full.
3. Start the shortest programme with a
rinsing phase. Do not add detergent
and do not load the baskets.
4. When the programme is completed,
adjust the water softener according
to the water hardness in your area.
5. Adjust the released quantity of rinse
aid.
10.4 Loading the baskets
• Use the appliance to wash
dishwasher-safe items only.
• Do not wash in the appliance items
made of wood, horn, aluminium,
pewter and copper.
• Do not wash in the appliance items
that can absorb water (sponges,
household cloths).
• Remove large food residues from
dishes.
• Soak cookware with burnt-on food
before washing it in the appliance.
• Put hollow items (cups, glasses and
pans) with the opening facing
downwards.
• Make sure that glasses do not touch
each other.
• Put light items in the upper basket.
Make sure that the items do not move
freely.
• Put cutlery and small items in the
cutlery drawer.
• Make sure that the spray arms can
move freely before you start a
programme.
10.5 Before starting a
programme
Before you start the selected
programme, make sure that:
• The filters are clean and correctly
installed.
• The cap of the salt container is tight.
• The spray arms are not clogged.
• There is enough salt and rinse aid
(unless you use multi-tablets).
• The arrangement of the items in the
baskets is correct.
• The programme is suitable to the
type of load and the degree of soil.
• The correct quantity of detergent is
used.
10.6 Unloading the baskets
1. Let the tableware cool down before
you remove it from the appliance.
Hot items can be easily damaged.
2. First remove items from the lower
basket, then from the upper basket.
After the programme is
completed, water can still
remain on the inside
surfaces of the appliance.
11. CARE AND CLEANING
WARNING!
Before maintenance,
deactivate the appliance and
disconnect the mains plug
from the main socket.
Dirty filters and clogged
spray arms decrease the
washing results. Make a
check regularly and, if
necessary, clean them.
11.1 Cleaning the filters
The filter system is made of 3 parts.
www.aeg.com18
C
B
A
1. Turn the filter (B) counterclockwise
and remove it.
2. Remove the filter (C) out of filter (B).
3. Remove the flat filter (A).
4. Wash the filters.
5. Make sure that there are no residues
of food or soil in or around the edge
of the sump.
6. Put back in place the flat filter (A).
Make sure that it is correctly
positioned under the 2 guides.
7. Reassemble the filters (B) and (C).
8. Put back the filter (B) in the flat filter
(A). Turn it clockwise until it locks.
CAUTION!
An incorrect position of the
filters can cause bad
washing results and damage
to the appliance.
ENGLISH 19
11.2 Cleaning the upper spray
arm
We recommend to clean the upper spray
arm regularly to prevent soil from
clogging the holes.
Clogged holes can cause unsatisfactory
washing results.
1. Pull out the upper basket.
2. To detach the spray arm from the
basket, press the spray arm upwards
and simultaneously turn it clockwise.
3. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes.
4. To install the spray arm back, press
the spray arm upwards and
simultaneously turn it
counterclockwise until it locks into
place.
11.3 External cleaning
• Clean the appliance with a moist soft
cloth.
• Only use neutral detergents.
• Do not use abrasive products,
abrasive cleaning pads or solvents.
11.4 Internal cleaning
• Carefully clean the appliance,
including the rubber gasket of the
door, with a soft damp cloth.
• To maintain the performance of your
appliance, use a cleaning product
designed specifically for dishwashers
at least once a month. Carefully follow
the instructions on the packaging of
the product.
• Do not use abrasive products,
abrasive cleaning pads, sharp tools,
strong chemicals, scourer or solvents.
• Using short-duration programmes
regularly can cause grease and
limescale buildup inside the
appliance. Run long-duration
programmes at least twice a month to
prevent the buildup.
www.aeg.com
20
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
La page charge ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
AEG FSK93705P Manuel utilisateur
- Catégorie
- Lave-vaisselle
- Taper
- Manuel utilisateur
dans d''autres langues
- English: AEG FSK93705P User manual