Electrolux END33601X Manuel utilisateur

Catégorie
Frigos
Taper
Manuel utilisateur

Ce manuel convient également à

NO-FROST REFRIGERATOR
Freezer-Fridge
Instruction booklet
RÉFRIGÉRATEUR A FROID VENTILE
Réfrigérateur - Congélateur
Guide d’utilisation
FRIGORÍFICO CON TECNOLOGÍA NO FROST
Congelador - Frigorífico
Manual de Instrucciones
FRIGORIFICO “NO FROST”
Congelador - Frigorífico
Manual de Instruções
NO-FROST
(ΧΩΡΙΣ ΠΑΓΟ) Ψυγείο
Οδηγίες Χρήσης
END33601X
UK - 1 -
Index
BEFORE USING THEAPPLIANCE ..................................................................... 2
Recommendations ............................................................................................................ 3
Installation and Switching On The Appliance ................................................................. 4
Before Switching On .......................................................................................................... 4
THE VARIOUS FUNCTIONAND POSSIBILITIES ............................................... 5
Thermostat Setting ............................................................................................................ 5
ACCESSORIES .................................................................................................. 6
Ice tray ................................................................................................................................. 6
ARRANGING FOOD IN THE APPLIANCE .......................................................... 7
Refrigerator Compartment ............................................................................................... 7
Freezer Compartment ....................................................................................................... 7
CLEANINGAND MAINTENANCE ....................................................................... 8
Defrosting .......................................................................................................................... 8
Replacing The Light Bulb ................................................................................................. 9
TRANSPORTATIONAND CHANGING OF INSTALLATION POSITION ............... 9
Changing of Door Opening Direction .............................................................................. 9
BEFORE CALLING YOURAFTER SALES SERVICE .........................................10
THE PARTS OF THEAPPLIANCEAND THE COMPARTMENTS ....................... 11
UK - 2 -
PART- 1. BEFORE USING THE APPLIANCE
Special Instructions
• If the model contains R600a-see name plate under refrigerant (the coolant isobutane),
naturals gas that, is very environmentally friendly but also combustible. When
transporting and installing the unit care must be taken to ensure that none of the
refrigeration circuit components become damaged. In the event of damage avoid
naked flames or ignition sources and ventilate the room in which the unit is placed
for a few minutes.
Warning: Keep ventilation openings in appliance enclosure or in structure for building
in, clear of obstruction.
Do not use mechanical devices or other artificial means to accelerate the defrosting
process.
Do not use electrical appliances in the refrigerator or freezer compartment of the
appliance.
If this appliance is to replace an old refrigerator with a lock; break or remove the lock
as a safety measure before storing it, to protect children while playing might lock
themselves inside.
Old refrigerators and freezers contain insulation gases and refrigerant, which must
be disposed of properly. Entrust the disposal of a scrap unit categorically to
competence of your local waste disposal service and contact your local authority or
your dealer if you have any questions. Please ensure that the pipe of work of your
refrigerating unit does not get damaged prior to being picked-up by the relevant waste
disposal service.
Important note:
Please read this booklet before installing and switching on this appliance. The
manufacturer assumes no responsibility for incorrect installation and usage as described
in this booklet.
UK - 3 -
Recommendations
Warning: Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer. Do not use electrical
appliances inside the food storage compartments of the appliance, unless they are of
the type recommended by the manufacturer. Keep ventilation openings, in the appliance
enclosure or in the built-in structure, clear of obstruction. Do not damage the refrigerant
circuit.
Do not use adopters or shunts which could cause overheating or burning.
Do not plug old, warped power supply cables.
Do not twist and bend the cables.
Do not allow children to play with the appliance. Children must
NEVER sit on drawers/shelves or hang from the door.
Do not plug the power supply with wet hands.
• Do not place containers (glass bottles or tin containers) of liquids
into the freezer especially gassy liquids as they could cause
the container to burst during freezing.
Bottles, which contain a high percentage of alcohol must be
sealed well and placed vertically in the refrigerator.
Do not touch the cooling surfaces, especially with wet hands as
you could be burnt or hurt.
Do not eat ice, which have just been removed from the freezer.
If the supply cord is damaged it must be replaced by the
manufacturer or service agent or appointed qualified person.
The appliance is not intended for use by people (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by
a person responsible for their safety. Children should be supervised to ensure that
they don’t play with the appliance.
If the supply cord is damaged it must be replaced by the manufacturer or service
agent or similary qualified people in order to avoid a hazard.
UK - 4 -
Installation and Switching On The Appliance
This appliance is connecting to 220-240V and 50 Hz.
You can offer help from the service to install and switching on the appliance.
Before making the connection to the power supply, ensure that the voltage on the
nameplate corresponds to the voltage of electrical system in your home.
If the socket does not match the refrigerator plug, replace the plug with a suitable
one (at least 16 A)
Insert the plug into a socket with an efficient ground connection. If the socket has no
ground contact, we suggest you call an electrician for assistance.
Manufacturer is not responsible for failure to complete the
ground connection as described in this booklet.
Do not place the appliance in direct sunlight.
Do not use in open air and shall not be exposed to the rain.
Place the refrigerator far from heat sources and in a
well-ventilated position. The refrigerator should be at least 50
cm from radiators, gas or coal stoves and 5 cm far from electrical
stoves.
Keep the top free for at least 15 cm.
Do not place heavy and lots of things on the appliance.
If the appliance is installed next to another refrigerator or freezer,
observe a minimum distance of 2 cm to prevent condensation.
The appliance must be stand firmly and level on the floor Use
the two front levelling-feet to compensate for an even floor.
In order to have air circulation under the appliance, the space
under the appliance must be open. Don’t close it with carpet,
etc.
The outside of the appliance and the accessories inside should
be cleaned with a solution of water and liquid soap; the inside
of the appliance with sodium bicarbonate dissolved in lukewarm
water. After drying replace all the accessories.
Before Switching On
• Wait after 3 hours before plugging the appliance in to the main power
to ensure proper performance.
There can be an odour when you first switch on the appliance. It will
disappear after the appliance starts to cool.
UK - 5 -
PART- 2.
THE VARIOUS FUNCTION AND POSSIBILITIES
Thermostat Setting
FREEZER THERMOSTAT REFRIGERATOR THERMOSTAT
CLIMATE
WINTER
SPRING / AUTUMN
SUMMER
10
o
C< T
amb
<16
o
C
16
o
C< T
amb
<25
o
C25
o
C< T
amb
<43
o
C
Remarks
Freezer
Thermostat
Cooler
Thernostat
Ambient
temperateure
Set to appropriate position
between 1 and 2.
Positions 2.5 and 3 would
be enough according to
your refrigerator model.
Set to appropriate position
between 2 and 3.
Positions 2.5 and 3 would
be enough according to
your refrigerator model.
Set to appropriate position
between 3 and 6.
Positions 2.5 and 3 would
be enough according to
your refrigerator model.
If your refrigerator is in an
extremely cold place with
an ambient temperature of
10
o
C, and if you think the
cooler compartement is
cold with cooler thermostat
set to minimum, you can
set freezer thermostat to
lower positions.
With ambient temperatures
over 38
o
C, if your cooler
compartement is not cool
enough as you want, you
can set freezer thermostat
to higher positions.
Default positions values of your refrigerator are 2.5-3 for freezer compartement
thermostat, and 3 for cooler compartment thermostat.
We advise you not to change your freezer thermostat positions except above
mentioned conditions. Your cooler thermostat can be set according to the ambient
temperature as mentioned above.
The values mentioned in the table are recommended thermostat positions. These
values can change according to usage conditions.
Freezer and refrigerator thermostat automatically
regulates the inside temperature of the compartments.
By rotating the freezer thermostat knob from position
1 to 4 and refrigerator thermostat knob from MIN to MAX,
colder temperatures can be obtain. In cold seasons,
you can set lower positions in order to decrease the
energy consumption.
Note that; freezer and refrigerator temperatures affect each other. For example; when the
refrigerator thermostat is at maximum, for obtaining lower temperatures in refrigerator
compartment, set the freezer thermostat to a higher value. When the freezer thermostat
is at its maximum, for obtaining lower temperatures in freezer compartment, set the
refrigerator thermostat to a lower value.
MIN
MAX
1
2
3
4
5
6
UK - 6 -
PART- 4.
ARRANGING FOOD IN THE APPLIANCE
Refrigerator Compartment
To set the refrigerator compartment to 2-3 graphic bar will be enough for normal
conditions.
To reduce humidity and consequent increase of frost never place liquids in unsealed
containers in the refrigerator.
Never place warm food in the refrigerator. Warm food should be allowed to cool at
room temperature and should be arranged to ensure adequate air circulation in the
refrigerator compartment.
Arrange the meat and cleaned fish (wrapped in packages or sheets of plastic) which
you will use in 1-2 days.
You can put the fruits and vegetables into crisper without packing.
Note that; the ambient temperature, temperature of the freshly stored food and how often
the door is opened, affects the temperature in the refrigerator and freezer compartment. If
required, change the temperature setting.
In order to prevent sweating and accumulation of bacteria inside the refrigerator
compartmen, it is recommended not to set the refrigerator thermostat to MIN position
even there is no storage of food inside.
When you first switch on the appliance, for starting a suitable cooling, the appliance
should work 24 hours continuously until it cools down to sufficient temperature.
In this time do not open the door so often and do not place a lot of food inside the
appliance.
If the unit is switched off or unplugged, you must allow at least 5 minutes before
restarting or re-plugging the unit in order not to damage the compressor.
PART- 3.
ACCESSORIES
Ice tray
Fill the ice tray with water and place in freezer compartment.
• After the water completely turned into ice, you can twist the tray as shown below to
get the ice cube.
It is suggested to freeze fresh foods at the upper shelf and far from the thermostat.
UK - 7 -
Freezer Compartment
To set the freezer compartment to 2-3 graphic bar will be enough for normal conditions.
The use of freezer is, storing of deep-frozen or frozen foods for long periods of time
and making ice cubes.
Do not put fresh and warm foods to the freezer door shelves to be frozen. Only use
for storage of frozen foods.
• Do not put fresh and warm food with frozen food side by side as it can thaw the frozen
food.
Use the fast freezing shelf to freeze home cooking (and the foods which is wanted to
freeze) more quickly because of the freezing rooms greater freezing power.
While freezing fresh foods (i.e. meat, fish and mincemeat) divide them in parts you
will use in one time.
While freezing fresh foods ; Maximum amount of fresh food (in kg) that can be frozen
in 24 hours is indicated on the appliance label.
It is suggested to freeze fresh foods at the upper shelf and far from the thermostat.
For storing the frozen foods; the instructions shown on frozen food packages should
always be followed carefully and if no information is provided food should not be
stored for more than 3 months from the purchased date.
When buying frozen foods ensure that these have been frozen at suitable
temperatures and that the packing is intact.
Frozen foods should be transported in appopriate containers to maintain the quality
of the food and should be returned to the freezing surfaces of the unit in the shortest
possible time.
If a package of frozen food shows the sign of humidity and abnormal swelling it is
probable that it has been previously stored at an unsuitable temperature and that
the contents have deteriorated.
The storage life of frozen foods depends on the room temperature, thermostat
setting, how often the door is opened, the type of food and the length of time required
to transport the product from the shop to your home. Always follow the instructions
printed on the package and never exceed the maximum storage life indicated.
UK - 8 -
PART- 5. CLEANING AND MAINTENANCE
Disconnect unit from the power supply before cleaning.
Do not clean the appliance by pouring water.
The refrigerator and freezer compartment should be
cleaned periodically using a solution of bicarbonate of
soda and lukewarm water
Clean the accessories separately with soap and water.
Do not clean them in the washing machine.
Do not use abrasive products, detergents or soaps. After
washing, rinse with clean water and dry carefully. When
the cleaning operations have been completed reconnect
the plug of the unit with dry hands.
You should clean the condenser with
broom at least once a year in order to
provide energy saving and increase the
productivity.
THE POWER SUPPLY MUST BE DISCONNECTE D.
Defrosting
Defrosting occurs fully automatically during
operation; the defrost water is collected by the
evaporating tray and evaporates automatically.
UK - 9 -
Replacing The Light Bulb
1. Unplug the unit from the power supply,
2. Remove the refrigerator light cover with a
minus screw driver, and take out the cover.
(A)
3. Change the present light bulb with a new
one of not more than 15 W. (B)
4. Replace the light cover (C) and after waiting
5 minutes plug the unit.
PART- 6.
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
Transportation and Changing of Installation Position
The original packages and foamed polystyrene (PS) can be concealed if required.
In transportation the appliance should be tied with a wide stripe or a strong rope.
The rules written on the corrugated box must be applied while transporting.
Before transporting or changing old installation position, all the moving objects (i.e.,
shelves, crisper…) should be taken out or fixed with bands in order to prevent the
shake.
Changing of Door Opening Direction
In case you need to change door-opening direction, please consult the domestic after
sales service.
(For some models)
UK - 10 -
PART- 7.
BEFORE CALLING YOUR AFTER SALES SERVICE
If your refrigerator is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your refrigerator does not operate;
Check that;
•Thereisnopower ,
The general switch in your home is disconnected ,
The thermostat setting is on «1 / MIN» position ,
The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your refrigerator performs poorly;
Check that;
You have not overloaded the appliance ,
The doors are closed perfectly ,
There is no dust on the condenser ,
There is enough place at the rear and side walls.
If there is noise;
The cooling gas which circulates in the refrigerator circuit may make a slight noise
(bubbling sound) even when the compressor is not running. Do not worry this is quite
normal. If these sounds are different check that;
The appliance is well levelled
Nothing is touching the rear.
The stuffs on the appliance are vibrating.
If your fridge is not cooling enough;
Your fridge is designed to operate in the ambient temperature intervals stated in the
standards, according to the climate class stated in the information label. We do not
recommend operating your fridge out of stated temperatures value limits in terms of cooling
effectiveness.
Climate Class Ambient Temperature (°C)
T
Between 16 and 43 (°C)
ST Between 16 and 38 (°C)
N
Between 16 and 32 (°C)
SN Between 10 and 32 (°C)
UK - 11 -
PART- 8.
THE PARTS OF THE APPLIANCE AND THE
COMPARTMENTS
This presentation is only for information about the parts of the appliance.
Parts may vary according to the appliance model.
Tropical Climate Class is described as between 16°C and 43°C of ambient
temperatures according to EN ISO15502 standards.
Appliance complies with EN15502, IEC60335-1 / IEC60335-2-24, 2004/108/EC
standards.
Recommendations
If the appliance is not used for long time (for example during the summer holidays)
unplug and clean the refrigerator leaving the door open to prevent the formation of
mildew and smell.
To stop the appliance completely, unplug from main socket (for cleaning and when
the doors are left open)
A
B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
A) FREEZER COMPARMENT
B) REFRIGERATOR COMPARTMENT
1) FREEZERTERMOSTAT BOX
2) ICE TRAY
3) FREEZER SHELF
4) REFRIGERATORTHERMOSTAT BOX
5)REFRIGERATOR SHELVES
6) REFRIGERATOR LAMP BOX/COVER
7) CRISPER COVER
8) CRISPER
9) KICK PLATE
10) EGG HOLDER
11) TOP SHELF
12) AROMATIC BOX
(*)
13) BOTTLE HOLDER
(*)
14) BOTTLE SHELF
15) BOTTOM SHELF
(*) Optional
UK - 12 -
The symbol on the product or on its packaging
indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information
about recycling of this product, please contact your local
city office, your household waste disposal service or the
shop where you purchased the product.
FR - 13 -
Sommaire
AVANT D’UTILISER CET APPAREIL .................................................................14
Instructions de sécuri................................................................................................... 14
Recommandations .......................................................................................................... 15
Installation et branchement de l’appareil ...................................................................... 16
Avant de brancher l’appareil ............................................................................................ 16
FONCTIONS DIVERSES ...................................................................................17
Réglage du thermostat .................................................................................................... 17
Accessoires ...................................................................................................................... 18
Bac à glaçons ............................................................................................................................. 18
Afficheur de température ................................................................................................. 19
RANGEMENT DESALIMENTS ..........................................................................20
Compartiment réfrigérateur ............................................................................................. 20
Compartiment congélateur ............................................................................................. 20
NETTOYAGEETENTRETIEN ............................................................................21
Dégivrage .......................................................................................................................... 21
Remplacement de l’ampoule ......................................................................................... 22
TRANSPORT ET DEPLACEMENT .....................................................................22
Changement du sens d’ouverture de la porte............................................................... 22
AVANT D’APPELER LE SERVICE APRES-VENTE .............................................23
ELEMENTS ET COMPARTIMENTS DE L’APPAREIL .........................................24
FR - 14 -
SECTION 1.
AVANT D’UTILISER CET APPAREIL
Instructions de sécurité
Si le modèle contient le R600a, voir plaque signalétique qui se trouve sous le
frigérant (l’isobutane du dispositif de refroidissement), un gaz naturel très
écologique mais aussi combustible. Vous devez être prudent lors du transport et de
l’installation du dispositif pour vous assurer qu’aucun des composants du circuit
de refroidissement n’est endommagé. En cas de dommage, évitez les flammes
nues ou les sources d’allumage, ventilez la chambre dans laquelle le dispositif se
trouve pendant quelques minutes.
Avertissement: Ne bloquez pas les ouvertures situées dans l’appareil ou dans la
structure.
N’utilisez pas des instruments caniques ou autres voies artificielles pour accélérer
le processus de dégivrage.
N’utilisez pas des appareils électriques dans le réfrigérateur ou dans le compartiment
congélateur de l’appareil.
Si cet appareil sert à remplacer un vieux réfrigérateur comportant un cadenas, cassez
ou retirez le cadenas, mesure de curi, avant de le garder pour éviter que les
enfants ne s’y enferment pendant leurs jeux.
Les vieux réfrigérateurs et congélateurs contiennent des gaz isolants et réfrigérants
qui doivent être éliminés convenablement. Assignez entièrement la mise au rebus
des appareils au service d’élimination d’ordures de votre localité et contactez
l’autori locale ou votre fournisseur en cas de questions. Veuillez vous assurer
que le tuyau dalimentation de votre unité frigorifique nest pas endommagé avant
que le service d’élimination de déchet ne le récupère.
Remarque importante:
Lisez attentivement ce livret avant d’installer et de mettre en marche lappareil. Le fabricant
n’assume aucune responsabili quant à une mauvaise installation et utilisation tel que
le livret le décrit.
Les produits électriques et électroniques usagés ne doivent pas être
jetés avec les ordures ménagères. Renseignez-vous auprès du
revendeur vous avez ache ce produit pour obtenir la marche à
suivre en matière de recyclage.
FR - 15 -
Recommandations
Avertissement : Nutilisez pas dappareils mécaniques ou d’autres moyens artificiels
pour accélérer le processus de décongélation. N’utilisez pas d’appareils électriques dans
l’espace de stockage des aliments de l’appareil. N’obstruez pas les ouvertures de
ventilation de l’appareil. N’endommagez pas le circuit de liquide réfrigérant du
frigérateur.
N’utilisez pas d’adaptateurs électrique ni de dérivations qui
risqueraient de provoquer une surchauffe ou un embrasement.
Nutilisez pas de câbles dalimentation électrique vieux et
endommagés.
Ne tordez pas et ne pliez pas le câble électrique.
Interdisez aux enfants de jouer avec cet appareil. Ils ne doivent en
aucun cas s’asseoir sur les compartiments ou les étagères, ni se
suspendre à la porte.
Ne branchez pas la prise électrique avec des mains mouillées.
Ne placez pas de récipients contenant des liquides (bouteilles en
verre ou canettes) dans le congélateur, tout particulrement
lorsqu’il s’agit de boissons gazeuses. Ils risqueraient d’exploser
pendant la congélation.
Les bouteilles d’alcool doivent être parfaitement rebouchées et
placées verticalement dans le réfrigérateur.
Ne touchez pas les surfaces de refroidissement, tout
particulièrement si vos mains sont mouillées, car vous risqueriez
de vous brûler ou de vous blesser.
Ne mangez pas de la glace qui vient juste de sortir du congélateur.
Cet appareil n’est pas destiné à être utilisé par des personnes (enfants inclus) dont
les capacités physiques, sensorielles ou intellectuelles sont réduites ou bien
manquant d’expérience et de connaissances à moins d’avoir été encades ou
formées au niveau de l’utilisation de l’appareil par une personne responsable de
leur curité. Surveillez les enfants pour s’assurer qu’ils ne jouent pas avec
l’appareil.
Si le cordon d’alimentation est endomma, il doit être rempla par le fabriquant
ou par un agent de maintenance ou une personne dûment qualifiée.
FR - 16 -
Installation et branchement de l’appareil
Cet appareil fonctionne sur courant alternatif 220-240V, 50 Hz.
Avant d’effectuer le raccordement électrique, assurez-vous que le voltage indiqué
sur la plaque signalétique correspond au voltage de l’installation électrique de votre
habitation.
Si la prise de courant et la prise du frigérateur ne sont pas compatibles, remplacez
cette dernière par une prise adéquate (au moins 16 A).
L’appareil doit être rel à la terre. Si vous ne disposez pas de prise de terre, nous
vous conseillons de contacter un électricien.
Le fabricant décline toute responsabili en cas de non-
raccordement à la terre conformément aux recommandations
de cette brochure.
N’exposez pas l’appareil aux rayons directs du soleil.
Cet appareil ne doit pas être utili en plein air, ni exposé à la
pluie.
Placez le frigérateur loin des sources de chaleur, dans un
endroit bien ventilé. Il doit se trouver au moins à 50 cm des
radiateurs, fours à gaz ou à charbon et à 5 cm des fours
électriques.
Prévoyez un espace libre d’au moins 15 cm au-dessus de
l’appareil.
Evitez de placer des objets lourds ou un grand nombre d’objets
sur l’appareil.
Si l’appareil est installé à cô d’un autre réfrigérateur ou
congélateur, observez une distance minimale de 2 cm pour
éviter la condensation.
La base de l’appareil doit être stable et horizontale. Utilisez les
pieds glables situés à l’avant de l’appareil pour compenser
les irrégularités du sol.
L’espace situé en dessous de l’appareil doit rester libre pour
assurer la circulation de l’air. Ne le bouchez pas avec un tapis,
etc.
L’extérieur de l’appareil et les accessoires intérieurs doivent être nettoyés avec une
solution d’eau et de savon liquide. L’intérieur doit être netto avec du bicarbonate
de soude dissous dans de l’eau tiède. Séchez avec soin et remettez les accessoires
en place.
Avant de brancher l’appareil
Attendez 3 heures avant de brancher lappareil, afin de garantir des
performances optimales.
Votre appareil neuf peut avoir une odeur particulre. Celle-ci
disparaîtra une fois qu’il commencera à se refroidir.
FR - 17 -
SECTION 2.
FONCTIONS DIVERSES
glage du thermostat
THERMOSTAT DU CONGELATEUR THERMOSTAT DU REFRIGERATEUR
Les thermostats du congélateur et du réfrigérateur
régulent automatiquement la température interne des
compartiments. En tournant le bouton du thermostat
du congélateur de la position 1 à 4 et le bouton du
thermostat du réfrigérateur de la position MIN à MAX,
vous obtiendrez des températures plus froides. Lors
des saisons froides, vous pouvez régler le thermostat
sur des positions plus faibles afin d’économiser de
l’énergie.
Remarque : les températures du congélateur et du réfrigérateur influent l’une sur l’autre.
Par exemple, si le thermostat du frigérateur est au maximum, augmentez le
thermostat du congélateur afin que le compartiment réfrigérateur soit plus froid.
SAISON
HIVER
PRINTEMPS/AUTOMNE
ÉTÉ
10
o
C< T
amb
<16
o
C
16
o
C< T
amb
<25
o
C
25
o
C< T
amb
<43
o
C
Remarques
Thermostat
de
congélation
Thermostat de
refroidissement
Température
ambiante
Placez sur la position
correcte entre 1 et 2.
Les positions 2.5 et 3
seront suffisantes selon le
modèle du réfrigérateur.
Si votre réfrigérateur est sit
dans un local ts froid avec
une température ambiante de
10ºC, et si le compartiment de
refroidissement est froid avec
le thermostat de
refroidissement au minimum,
vous pouvez régler le
thermostat de congélation au
minimum.
Avec des températures
ambiantes supérieures à
38ºC, si le compartiment de
refroidissement n’est pas
suffisamment froid, vous
pouvez régler le thermo-
stat de congélation au
maximum.
Les valeurs par défaut de votre réfrigérateur sont 2,5-3 pour le thermostat du compartiment
de congélation, et 3 pour le thermostat du compartiment de refroidissement.
Il est recommandé de ne pas changer les positions du thermostat de congélation sauf dans
les conditions visées ci-dessus. Le thermostat de refroidissement peut être réglé selon la
température ambiante comme décrit ci-dessus.
DLes valeurs indiqes dans le tableau sont les positions recommandées du thermostat.
Ces valeurs peuvent varier selon les conditions d’utilisation.
Placez sur la position
correcte entre 2 et 3.
Placez sur la position
correcte entre 3 et 6.
Les positions 2.5 et 3
seront suffisantes selon le
modèle du réfrigérateur.
Les positions 2.5 et 3
seront suffisantes selon le
modèle du réfrigérateur.
Commande de la température du conlateur et du frigérateur :
MIN
MAX
1
2
3
4
5
6
FR - 18 -
Accessoires
Remarque : la température ambiante, la temrature des aliments tout juste rangés et la
fréquence d’ouverture de la porte affectent la température des compartiments réfrirateur
et congélateur. Si nécessaire, glez à nouveau le thermostat.
Afin d’éviter l’humidi et l’accumulation de bactéries dans le compartiment
frigérateur, nous vous recommandons de ne pas gler le thermostat sur la
position MIN, même s’il n’y a aucun aliment.
Lors de la mise en marche initiale de l’appareil, pour un refroidissement optimal,
nous vous recommandons de laisser l’appareil fonctionner sans interruption durant
24 heures jusqu’à ce qu’il atteigne une température suffisamment froide.
Pendant ce temps, évitez d’ouvrir la porte trop fréquemment et placez le moins
d’aliments possible dans l’appareil.
Si vous éteignez ou débranchez l’appareil, attendez au moins 5 minutes avant de le
remettre en marche ou le rebrancher afin de ne pas endommager le compresseur.
Ba c à gla çons :
Versez de l’eau dans le bac à glaçons et placez-le dans le compartiment congélateur.
Une fois l’eau complètement gelée, pliez le bac suivant le schéma ci-dessous pour
cupérer les glaçons.
1 / 1

Electrolux END33601X Manuel utilisateur

Catégorie
Frigos
Taper
Manuel utilisateur
Ce manuel convient également à