Miller MC400091T Le manuel du propriétaire

Marque: Miller

Modèle: MC400091T

Catégorie: Système de soudage

Taper: Le manuel du propriétaire

Ce manuel convient également à

XR - PISTOL - PLUS

Processes

OM-248 663E

2012−08

MIG (GMAW) Welding

File: MIG (GMAW)

Visit our website at

www.MillerWelds.com

Description

Semi-Automatic, Air/Water-

Cooled, MIG (GMAW) Welding

Gun

XR - Pistol - Plus

(Air And Water-Cooled Guns)

Miller Electric manufactures a full line

of welders and welding related equipment.

For information on other quality Miller

products, contact your local Miller distributor to receive the latest full

line catalog or individual specification sheets. To locate your nearest

distributor or service agency call 1-800-4-A-Miller, or visit us at

www.MillerWelds.com on the web.

Thank you and congratulations on choosing Miller. Now you can get

the job done and get it done right. We know you don’t have time to do

it any other way.

That’s why when Niels Miller first started building arc welders in 1929,

he made sure his products offered long-lasting value and superior

quality. Like you, his customers couldn’t afford anything less. Miller

products had to be more than the best they could be. They had to be the

best you could buy.

Today, the people that build and sell Miller products continue the

tradition. They’re just as committed to providing equipment and service

that meets the high standards of quality and value established in 1929.

This Owner’s Manual is designed to help you get the most out of your

Miller products. Please take time to read the Safety precautions. They

will help you protect yourself against potential hazards on the worksite.

We’ve made installation and operation quick

and easy. With Miller you can count on years

of reliable service with proper maintenance.

And if for some reason the unit needs repair,

there’s a Troubleshooting section that will

help you figure out what the problem is. The

parts list will then help you to decide the

exact part you may need to fix the problem.

Warranty and service information for your

particular model are also provided.

Miller is the first welding

equipment manufacturer in

the U.S.A. to be registered to

the ISO 9001 Quality System

Standard.

Working as hard as you do

− every power source from

Miller is backed by the most

hassle-free warranty in the

business.

From Miller to You

Mil_Thank 2009−09

TABLE OF CONTENTS

SECTION 1 −SAFETY PRECAUTIONS FOR GMAW WELDING GUNS − READ BEFORE USING 1........

1-1. Symbol Usage 1........................................................................

1-2. Arc Welding Hazards 1..................................................................

1-3. Proposition 65 Warnings 2...............................................................

1-4. Principal Safety Standards 2.............................................................

1-5. EMF Information 2......................................................................

SECTION 2 − MESURES DE SÉCURITÉ VISANT LES PISTOLETS DE SOUDAGE GMAW − À LIRE AVANT

UTILISATION 3................................................................................

2-1. Signification des symboles 3.............................................................

2-2. Dangers relatifs au soudage à l’arc 3......................................................

2-3. Proposition californienne 65 Avertissements 4...............................................

2-4. Principales normes de sécurité 4..........................................................

2-5. Informations relatives aux CEM 4.........................................................

SECTION 3 − DEFINITIONS 5...................................................................

3-1. Additional Safety Symbols And Definitions 5................................................

3-2. Miscellaneous Symbols And Definitions 5...................................................

SECTION 4 − INTRODUCTION 6.................................................................

4-1. Specifications 6........................................................................

4-2. Duty Cycle And Overheating 6............................................................

SECTION 5 − INSTALLATION 7..................................................................

5-1. Equipment Connection Diagram - Single Feeder 7...........................................

5-2. Equipment Connection Diagram - Dual Feeder 8.............................................

5-3. 14-Pin Plug Information For Connecting Wire Feeder To Power Source 9........................

5-4. Opening Top Cover Of XR - Pistol - Plus Gun 9..............................................

5-5. Threading Welding Wire Through Gun 10....................................................

SECTION 6 − OPERATION 11....................................................................

6-1. Gun Controls 11.........................................................................

6-2. Gun Pressure Roll Tension Setting 11.......................................................

6-3. Shielding Gas 12........................................................................

6-4. Sequence Of Gas Metal Arc Welding (GMAW) − Continuous Or Spot 12..........................

6-5. Coolant Supply For Water-Cooled Models Only 12............................................

SECTION 7 − MAINTENANCE & TROUBLESHOOTING 13...........................................

7-1. Changing Gun Contact Tip 13.............................................................

7-2. Replacing Head Tube Liner 14.............................................................

7-3. Replacing The Liner 15...................................................................

7-4. Gun Drive Assembly Maintenance 16.......................................................

7-5. Troubleshooting Table 17.................................................................

SECTION 8 − ELECTRICAL DIAGRAMS 18........................................................

SECTION 9 − PARTS LIST 20.....................................................................

SECTION 10 − PARTS LIST INCLUDING CONSUMABLES 25........................................

WARRANTY

OM-248 663 Page 1

SECTION 1 −SAFETY PRECAUTIONS FOR GMAW

WELDING GUNS − READ BEFORE USING

SR7 (MIG) 2011-10

Protect yourself and others from injury — read, follow, and save these important safety precautions and operating instructions.

1-1. Symbol Usage

DANGER! − Indicates a hazardous situation which, if

not avoided, will result in death or serious injury. The

possible hazards are shown in the adjoining symbols

or explained in the text.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury. The possible

hazards are shown in the adjoining symbols or ex-

plained in the text.

NOTICE − Indicates statements not related to personal injury.

. Indicates special instructions.

This group of symbols means Warning! Watch Out! ELECTRIC

SHOCK, MOVING PARTS, and HOT PARTS hazards. Consult sym-

bols and related instructions below for necessary actions to avoid the

hazards.

1-2. Arc Welding Hazards

The symbols shown below are used throughout this manual

to call attention to and identify possible hazards. When you

see the symbol, watch out, and follow the related instructions

to avoid the hazard. The safety information given below is

only a summary of the more complete safety information

found in the welding power source Owner’s Manual. Read

and follow all Safety Standards.

Only qualified persons should install, operate, maintain, and

repair this unit.

During operation, keep everybody, especially children, away.

ELECTRIC SHOCK can kill.

D Always wear dry insulating gloves.

D Insulate yourself from work and ground.

D Do not touch live electrode or electrical parts.

D Repair or replace worn, damaged, or cracked gun or cable insula-

tion.

D Turn off welding power source before changing contact tip or gun

parts.

D Keep all covers and handle securely in place.

D Keep your head out of the fumes.

D Ventilate area, or use breathing device.

D Read Material Safety Data Sheets (MSDSs)

and manufacturer’s instructions for material

used.

FUMES AND GASES can be hazardous.

D Do not weld near flammable material.

D Do not weld on containers that have held com-

bustibles, or on closed containers such as

tanks, drums, or pipes unless they are properly prepared ac-

cording to AWS F4.1 and AWS A6.0 (see Safety Standards).

D Watch for fire; keep extinguisher nearby.

WELDING can cause fire or explosion.

BUILDUP OF GAS can injure or kill.

D Shut off compressed gas supply when not in

use.

D Always ventilate confined spaces or use ap-

proved air-supplied respirator.

MOVING PARTS can injure.

D Keep away from moving parts.

D Keep away from pinch points such as drive

rolls.

D Wear welding helmet with correct shade of fil-

ter.

D Wear correct eye and body protection.

D Cover exposed skin with spatter-resistant

clothing.

ARC RAYS can burn eyes and skin.

HOT PARTS can burn.

D Allow gun to cool before touching.

D Do not touch hot metal.

D Protect hot metal from contact by others.

NOISE can damage hearing.

Noise from some processes or equipment can

damage hearing.

D Check for noise level limits exceeding those

specified by OSHA.

D Use approved ear plugs or ear muffs if noise level is high.

D Warn others nearby about noise hazard.

WELDING WIRE can injure.

D Keep hands and body away from gun tip when

trigger is pressed.

READ INSTRUCTIONS.

D Read and follow all labels and the Owner’s

Manual carefully before installing, operating, or

servicing unit. Read the safety information at

the beginning of the manual and in each

section.

D Use only genuine replacement parts from the manufacturer.

D Perform maintenance and service according to the Owner’s

Manuals, industry standards, and national, state, and local

codes.

OM-248 663 Page 2

1-3. Proposition 65 Warnings

Welding or cutting equipment produces fumes or gases

which contain chemicals known to the State of California to

cause birth defects and, in some cases, cancer. (California

Health & Safety Code Section 25249.5 et seq.)

This product contains chemicals, including lead, known to

the state of California to cause cancer, birth defects, or other

reproductive harm. Wash hands after use.

1-4. Principal Safety Standards

Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1,

is available as a free download from the American Welding Society at

http://www.aws.org or purchased from Global Engineering Documents

(phone: 1-877-413-5184, website: www.global.ihs.com).

Safe Practice For Occupational And Educational Eye And Face Protec-

tion, ANSI Standard Z87.1, from American National Standards Institute,

25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-

site: www.ansi.org).

Safe Practices for the Preparation of Containers and Piping for Welding

and Cutting, American Welding Society Standard AWS F4.1, from Glob-

al Engineering Documents (phone: 1-877-413-5184, website: www.glo-

bal.ihs.com).

Safe Practices for Welding and Cutting Containers that have Held Com-

bustibles, American Welding Society Standard AWS A6.0, from Global

Engineering Documents (phone: 1-877-413-5184,

website: www.global.ihs.com).

National Electrical Code, NFPA Standard 70, from National Fire Protec-

tion Association, Quincy, MA 02269 (phone: 1-800-344-3555, website:

www.nfpa.org and www. sparky.org).

Safe Handling of Compressed Gases in Cylinders, CGA Pamphlet P-1,

from Compressed Gas Association, 14501 George Carter Way, Suite

103, Chantilly, VA 20151 (phone: 703-788-2700, website:

www.cganet.com).

Safety in Welding, Cutting, and Allied Processes, CSA Standard

W117.2, from Canadian Standards Association, Standards Sales, 5060

Spectrum Way, Suite 100, Ontario, Canada L4W 5NS (phone:

800-463-6727, website: www.csa-international.org).

Safe Practice For Occupational And Educational Eye And Face Protec-

tion, ANSI Standard Z87.1, from American National Standards Institute,

25 West 43rd Street, New York, NY 10036 (phone: 212-642-4900, web-

site: www.ansi.org).

Standard for Fire Prevention During Welding, Cutting, and Other Hot

Work, NFPA Standard 51B, from National Fire Protection Association,

Quincy, MA 02269 (phone: 1-800-344-3555, website: www.nfpa.org.

OSHA, Occupational Safety and Health Standards for General Indus-

try, Title 29, Code of Federal Regulations (CFR), Part 1910, Subpart Q,

and Part 1926, Subpart J, from U.S. Government Printing Office, Super-

intendent of Documents, P.O. Box 371954, Pittsburgh, PA 15250-7954

(phone: 1-866-512-1800) (there are 10 OSHA Regional Offices—

phone for Region 5, Chicago, is 312-353-2220, website:

www.osha.gov).

1-5. EMF Information

Electric current flowing through any conductor causes localized electric

and magnetic fields (EMF). Welding current creates an EMF field

around the welding circuit and welding equipment. EMF fields may inter-

fere with some medical implants, e.g. pacemakers. Protective meas-

ures for persons wearing medical implants have to be taken. For ex-

ample, restrict access for passers−by or conduct individual risk assess-

ment for welders. All welders should use the following procedures in or-

der to minimize exposure to EMF fields from the welding circuit:

1. Keep cables close together by twisting or taping them, or using a

cable cover.

2. Do not place your body between welding cables. Arrange cables

to one side and away from the operator.

3. Do not coil or drape cables around your body.

4. Keep head and trunk as far away from the equipment in the

welding circuit as possible.

5. Connect work clamp to workpiece as close to the weld as

possible.

6. Do not work next to, sit or lean on the welding power source.

7. Do not weld whilst carrying the welding power source or wire

feeder.

About Implanted Medical Devices:

Implanted Medical Device wearers should consult their doctor and the

device manufacturer before performing or going near arc welding, spot

welding, gouging, plasma arc cutting, or induction heating operations.

If cleared by your doctor, then following the above procedures is recom-

mended.

OM-248 663 Page 3

SECTION 2 − MESURES DE SÉCURITÉ VISANT LES

PISTOLETS DE SOUDAGE GMAW − À LIRE AVANT

UTILISATION

SR7(MIG)_2011−10fre

Pour écarter les risques de blessure pour vous−même et pour autrui — lire, appliquer et ranger en lieu sûr ces consignes relatives

aux précautions de sécurité et au mode opératoire.

2-1. Signification des symboles

DANGER! − Indique une situation dangereuse qui si on

l’évite pas peut donner la mort ou des blessures graves.

Les dangers possibles sont montrés par les symboles

joints ou sont expliqués dans le texte.

Indique une situation dangereuse qui si on l’évite pas

peut donner la mort ou des blessures graves. Les dan-

gers possibles sont montrés par les symboles joints ou

sont expliqués dans le texte.

NOTE − Indique des déclarations pas en relation avec des blessures

personnelles.

. Indique des instructions spécifiques.

Ce groupe de symboles veut dire Avertissement! Attention! DANGER

DE CHOC ELECTRIQUE, PIECES EN MOUVEMENT, et PIECES

CHAUDES. Consulter les symboles et les instructions ci-dessous y

afférant pour les actions nécessaires afin d’éviter le danger.

2-2. Dangers relatifs au soudage à l’arc

Les symboles présentés ci-après sont utilisés tout au long du

présent manuel pour attirer votre attention et identifier les ris-

ques de danger. Lorsque vous voyez un symbole, soyez vigi-

lant et suivez les directives mentionnées afin d’éviter tout

danger. Les consignes de sécurité présentées ci-après ne

font que résumer l’information contenue dans les normes de

sécurité énumérées dans le manuel d’utilisation du poste de

soudage. Veuillez lire et respecter toutes ces normes de sé-

curité.

L’installation, l’utilisation, l’entretien et les réparations ne

doivent être confiés qu’à des personnes qualifiées.

Au cours de l’utilisation, tenir toute personne à l’écart et plus

particulièrement les enfants.

UN CHOC ÉLECTRIQUE peut tuer.

D Porter toujours des gants secs et isolants.

D S’isoler de la pièce et de la terre.

D Ne jamais toucher une électrode ou des pièces

électriques sous tension.

D Réparer ou remplacer un pistolet ou la gaine d’isolement d’un

câble usée, endommagée ou fissurée.

D Mettre la soudeuse hors tension avant de remplacer un bec con-

tact ou des pièces de pistolet.

D S’assurer que tous les couvercles et poignées sont fermement

assujettis.

LES VAPEURS ET LES FUMÉES

peuvent être nocives.

D Éloigner sa tête des endroits renfermant des

vapeurs.

D Aérer la zone de travail ou porter un appareil re-

spiratoire.

D Consulter les fiches toxicologiques (MSDS) et les notices du fab-

ricant de chaque matériel utilisé.

LE SOUDAGE peut causer un incen-

die ou une explosion.

D Ne pas souder à proximité de matériaux inflam-

mables.

D Ne pas effectuer le soudage sur des conte-

neurs fermés tels que des réservoirs,

tambours, ou conduites, à moins qu’ils n’aient

été préparés correctement conformément à

AWS F4.1 et AWS A6.0 (voir les Normes de

Sécurité).

D Prendre garde aux incendies et toujours avoir un extincteur à

proximité.

L’ACCUMULATION DE VAPEURS

peut causer des lésions ou la mort.

D Quand on n’utilise pas le gaz comprimé de

protection, fermer le robinet de la bouteille.

D Assurer toujours la ventilation des zones fer-

mées ou utiliser un appareil respiratoire avec

alimentation en air.

Les PIÈCES MOBILES peuvent

causer des blessures.

D Ne pas s’approcher des organes mobiles.

D Ne pas s’approcher des points de coincement

tels que des rouleaux de commande.

LE RAYONNEMENT DE L’ARC peut

brûler les yeux et la peau.

D Porter un casque de soudage muni d’un filtre

de protection oculaire approprié.

D Porter une protection oculaire et des vête-

ments de protection appropriés.

D Protéger la peau nue en portant des vêtements anti-éclabous-

sures.

OM-248 663 Page 4

LES PIÈCES CHAUDES peuvent

provoquer des brûlures.

D Laisser refroidir le pistolet avant de le toucher.

D Ne pas toucher d’objets métalliques chauds.

D Abriter les objets métalliques contre tout con-

tact par les personnes à proximité.

Le BRUIT peut endommager l’ouie.

Le bruit des processus et des équipements peut

affecter l’ouïe.

D Vérifier si les niveaux de bruit excèdent les lim-

ites spécifiées par l’OSHA.

D Utiliser des bouche-oreilles ou des serre-tête antibruit approuvés

si le niveau de bruit est élevé.

D Avertir les personnes à proximité au sujet du danger inhérent au

bruit.

LES FILS DE SOUDAGE peuvent

provoquer des blessures.

D Éloigner les mains et le corps de la buse du pis-

tolet après avoir appuyé sur la gâchette.

LIRE LES INSTRUCTIONS.

D Lire et appliquer les instructions sur les

étiquettes et le Mode d’emploi avant

l’installation, l’utilisation ou l’entretien de

l’appareil. Lire les informations de sécurité au

début du manuel et dans chaque section.

D N’utiliser que les pièces de rechange recommandées par le

constructeur.

D Effectuer l’entretien en respectant les manuels d’utilisation,

les normes industrielles et les codes nationaux, d’état et locaux.

2-3. Proposition californienne 65 Avertissements

Les équipements de soudage et de coupage produisent des

fumées et des gaz qui contiennent des produits chimiques

dont l’État de Californie reconnaît qu’ils provoquent des

malformations congénitales et, dans certains cas, des

cancers. (Code de santé et de sécurité de Californie, chapitre

25249.5 et suivants)

Ce produit contient des éléments chimiques, dont le plomb,

reconnus par l’État de Californie pour leur caractère

cancérogène ainsi que provoquant des malformations

congénitales ou autres problèmes de procréation. Se laver

les mains après toute manipulation.

2-4. Principales normes de sécurité