Ariston OS 99D P IX Mode d'emploi

Marque: Ariston

Modèle: OS 99D P IX

Catégorie: Fours

Taper: Mode d'emploi

OS 99D P IX

Contents

Installation, 2-3

Positioning

Electrical connection

Technical data

Description of the appliance, 4

Overall view

Control panel

Display

Oven structure, 5

Start-up and use, 6-12

Setting the clock

Setting the timer

ExtraLarge Space

Small Space

Main Space

Using the Small Space and Main Space at the same

time

Programming cooking

Practical cooking advice

Cooking advice table for ovens with the ExtraLarge

Space feature

Cooking advice table for the Small Space feature

Cooking advice table for the Main Space feature

Cooking advice table for using the Small Space and

Main Space at the same time

Precautions and tips, 13

General safety

Disposal

Respecting and conserving the environment

Care and maintenance, 14-15

Switching the appliance off

Cleaning the appliance

Cleaning the oven door

Replacing the light bulb

Automatic cleaning with the FAST CLEAN function

Assistance, 16

Operating Instructions

OVEN

Français, 17

Espanol, 33

Portuges, 49

English,1

Ventilation

To ensure adequate ventilation is provided, the back

panel of the cabinet must be removed. It is

advisable to install the oven so that it rests on two

strips of wood, or on a completely flat surface with

an opening of at least 45 x 560 mm (see diagrams).

Centring and fixing

Position the 4 tabs on the side of the oven so that

they are aligned with the 4 holes on the outer frame.

Adjust the tabs in accordance with the thickness of

the cabinet side panel, as shown below:

20 mm thick: take off the

removable part of the tab (see

diagram).

18 mm thick: use the first

groove, which has already

been set in the factory (see

diagram).

16 mm thick: use the second

groove (see diagram).

Secure the appliance to the cabinet by opening the

oven door and inserting 4 screws into the 4 holes on

the outer frame.

 All parts which ensure the safe operation of the

appliance must not be removable without the aid of

a tool.

 Before operating your new appliance please read

this instruction booklet carefully. It contains

important information concerning the safe operation,

installation and maintenance of the appliance.

 Please keep these operating instructions for future

reference. Pass them on to any new owners of the

appliance.

Positioning

 Keep all packaging material out of reach of

children. It may present a choking or suffocation

hazard (see Precautions and tips).

 The appliance must be installed by a qualified

professional in accordance with the instructions

provided. Incorrect installation may damage

property or cause harm to people or animals.

Built-in appliance

Use a suitable cabinet to ensure that the appliance

functions properly.

 The panels adjacent to the oven must be made of

heat-resistant material.

 Cabinets with a veneer exterior must be

assembled with glues which can withstand

temperatures of up to 100°C.

 To install the oven under the counter (see

diagram) or in a kitchen unit, the cabinet must

have the following dimensions:

 The appliance must not come into contact with

electrical parts once it has been installed.

The indications for consumption given on the data

plate have been calculated for this type of

installation.

595 mm.

24 mm.

545 mm.

5 mm.

576 mm.

23 mm.

593 mm.

45 mm.

558 mm.

. m

Installation

560 m

45 mm.

Electrical connection

 Ovens equipped with a three-pole power supply

cable are designed to operate with alternating

current at the voltage and frequency indicated on

the data plate located on the appliance (see below).

Fitting the power supply cable

1. Open the terminal

board by inserting a

screwdriver into the

side tabs of the cover.

Use the screwdriver as

a lever by pushing it

down to open the cover

(see diagram).

2. Install the power

supply cable by

loosening the cable

clamp screw and the

three wire contact

screws L-N-

Connect the wires to

the corresponding

terminals: the Blue wire

to the terminal marked

(N), the Brown wire to

the terminal marked (L)

and the Yellow/Green

wire to the terminal

marked

(see diagram).

3. Secure the cable by fastening the clamp screw.

4. Close the cover of the terminal board.

Connecting the electricity supply cable to the

mains

Install a standardised plug corresponding to the

load indicated on the data plate (see table).

The appliance must be directly connected to the mains

using an omnipolar switch with a minimum contact

opening of 3 mm installed between the appliance and

the mains. The switch must be suitable for the charge

indicated and must comply with current electrical

regulations (the earthing wire must not be interrupted

by the switch). The supply cable must be positioned

so that it does not come into contact with temperatures

higher than 50°C at any point.

 The installer must ensure that the correct electrical

connection has been made and that it is fully

compliant with safety regulations.

Before connecting the appliance to the power

supply, make sure that:

 The appliance is earthed and the plug is compliant

with the law.

 The socket can withstand the maximum power of

the appliance, which is indicated on the data

plate (see below).

 The voltage is in the range between the values

indicated on the data plate (see below).

 The socket is compatible with the plug of the

appliance. If the socket is incompatible with the

plug, ask an authorised technician to replace it.

Do not use extension cords or multiple sockets.

 Once the appliance has been installed, the power

supply cable and the electrical socket must be

easily accessible.

 The cable must not be bent or compressed.

 The cable must be checked regularly and replaced

by authorised technicians only (see Assistance).

 The manufacturer declines any liability should

these safety measures not be observed.

APPLIANCE SPECIFICATIONS

Dimensions

width 43.4 cm

height 39.5 cm

depth 40.8 cm

Volume

70 l

Electrical

connections

voltage: 220 - 240 V~ 50Hz

maximum power absorbed

3400 W (see data plate)

ENERGY

LABEL

Directive 2002/40/EC on the

label of electric ovens.

Standard EN 50304

Declared energy consumption

for Forced convection Class –

heating mode:

Gratin.

This appliance conforms to the

following European Economic

Community directives:

2006/95/EEC dated 12/12/06

(Low Voltage) and subsequent

amendments - 89/336/EEC

dated 03/05/89

(Electromagnetic Compatibility)

and subsequent amendments -

93/68/EEC dated 22/07/93 and

subsequent amendments.

2002/96/EEC

Control panel

RACK shelf

DRIPPING PAN shelf

GUIDE RAILS

for the sliding racks

position 5

position 4

position 3

position 7

position 6

Divider "D" position

position 2

position 1

DIVIDER shelf

Description of

the appliance

Overall view

Control panel

Display

EXTRALARGE

SPACE FUNCTION

knob

SET

TEMPERATURE/TIMER

knob

DISPLAY

SET TIMER

button

SELECT RECESS

button

MAIN SPACE

FUNCTION

knob

SMALL SPACE

FUNCTION

knob

¡•OC

•• ••

¡•OC

•• ••

TEMPERATURE and

TIME numerical digits

END OF COOKING

icon

DURATION

icon

TIMER icon

RECESS

SELECTED

icon

DOOR LOCK

icon

The Openspace oven has a capacity of 70 litres and

offers users the option of cooking on 4 shelves at

the same time or cooking large quantities, which

would not necessarily be possible in a traditional

oven.

Thanks to the ExtraLarge Space, Openspace offers

10 cooking functions, 6 of which are universal and

suitable for any type of cooking, while the remaining

4 are automatic programmes which can be used to

achieve perfect results for any recipe.

Openspace also offers maximum comfort for all

requirements, with 4 different operating options: the

oven is one large compartment but can be divided

into separate spaces of various sizes, each with its

Oven structure

own independent temperature and duration controls.

This is made possible thanks to the heat-insulating

DIVIDER, which divides the whole ExtraLarge Space

into two different-sized spaces: the Main Space and

the Small Space.

The two Main and Small Space compartments may

be used at the same time to cook different dishes

more quickly, or they may be used separately so

that only the space necessary is used.

When the two compartments are used at the same

time, the cooking temperature of each may be

adjusted to a value between 50° and 250°. There

may be a difference in temperature of 100° between

the two zones, which means it is possible to cook

very different dishes without any flavours or aromas

intermingling.

RACK

DRIPPING PAN

RACK

EXTRALARGE

SPACE

ExtraLarge Space: cooking on 4 shelf levels

RACK or DRIPPING PAN

DRIPPING PAN

(cooking on 3 shelves)

Divider "D" (fixed position)

RACK (cooking on 3 shelves)

SMALL

SPACE

MAIN

SPACE

DRIPPING PAN

(cooking on 3 shelves)

Divider "D" (fixed position)

RACK (cooking on 3 shelves)

SMALL

SPACE

MAIN

SPACE

Main and Small Space: simultaneous operation

RACK or DRIPPING PAN

Divider "D"

(fixed position)

SMALL

SPACE

MAIN

SPACE

Cooking using the Small Space only

Cooking using the Main Space only: cooking on 3 shelf levels

The table below lists the possible temperature

values which may be set. The intelligent display will

guide you through the correct procedure used to

adjust the temperature of the two recesses.

To cancel any of the settings, simply tu rn the Small Space or Main Space function knob to the "0"

position.

Temperature in the first cavity

(Main or Small Space)

Temperature in the second cavity

(Small or Main Space)

Between 40°C and 150°C The temperature difference in relation to the first recess

selected is no greater than 50°C

For example: if you set one recess to 90°C,

you may set a value of between 40°C (90°C-50°C) and 140°C (90°C+50°C) for the other.

Between 155°C and 200°C The temperature difference in relation to the first recess

selected is no greater than 70°C

For example: if you set one recess to 180°C,

you may set a value of between 110°C (180°C-70°C) and 250°C (180°C+70°C) for the other.

Between 205°C and 250°C The temperature difference in relation to the first recess

selected is no greater than 100°C

For example: if you set one recess to 210°C,

you may set a value of between 110°C (210°C-100°C) and 250°C (maximum temperature setting) for the other.

 The first time you use your appliance, heat the empty

oven with its door closed at its maximum temperature for

at least half an hour. Make sure that the room is well

ventilated before switching the oven off and opening the

oven door. The appliance may emit a slightly unpleasant

odour caused by protective substances used during the

manufacturing process burning away.

 Never put objects directly on the bottom of the oven; this

will prevent the enamel coating from being damaged.

 Always place cookware on the racks provided.

 During use, we suggest removing any crockery or

delicate foodstuffs from the recesses not in function.

 We suggest not opening the door when cooking

foodstuffs which require leavening, so as to not

compromise cooking results.

 If the door is subject to repeated jerking, the divider may

come out of its housing. If this happens, the time will

appear on the display. Make sure that the divider is

correctly installed then re-start cooking.

Cooling ventilation

In order to cool down the external temperature of the oven,

a cooling fan blows a stream of air between the control

panel and the oven door.

 Once cooking is completed, the cooling fan activates

and deactivates automatically until the oven has cooled

down sufficiently.

Setting the clock

 This may only be set while the oven is switched off.

1. Press the

button until the first numerical digit flashes

on the display and the

, and icons are switched

off.

2. Turn the TIMER KNOB towards + and - to adjust

the hour value.

3. Press the

button again so that the other two

numerical digits on the DISPLAY begin to flash.

4. Turn the TIMER KNOB towards + and - to adjust

the minute value.

5. Press the

button again to confirm.

Setting the timer

 This function does not interrupt cooking and does not

affect the oven; it is simply used to activate the buzzer

when the set amount of time has elapsed.

1. Press the

button until the icon and the three

digits on the DISPLAY begin to flash.

2. Turn the TIMER KNOB towards + and - to adjust

the minute value.

3. Press the

button again to confirm.

The display will then show the time as it counts down.

When this period of time has elapsed the buzzer will be

activated.

ExtraLarge Space

Starting the oven

1. Select the desired cooking function by turning the

EXTRALARGE SPACE FUNCTION knob. If the

icon

on the display is lit, this indicates that the ExtraLarge

Space has been selected and therefore that only the

settings corresponding to the ExtraLarge Space may be

used.

2. The oven will begin its preheating stage. The

temperature may be changed by turning the

TEMPERATURE knob. The

indicator light flashes

during the pre-heating stage.

3. Once the pre-heating stage is completed, the

icon

stops flashing (becomes fixed) and a buzzer sounds. It is

now possible to introduce foodstuffs into the oven.

4. During cooking it is always possible to:

- Change the cooking function by turning the

EXTRALARGE SPACE FUNCTION knob.

- Adjust the temperature using the TEMPERATURE knob

(for the universal cooking functions only).

- Set a duration (for universal cooking functions only) and

the cooking end time.

- Stop cooking by turning the EXTRALARGE SPACE

FUNCTION knob to the 0 position.

5. If a blackout occurs while the oven is already in

operation, an automatic system within the appliance will

reactivate the cooking function from the point at which it

was interrupted, as long as the temperature has not

dropped below a certain level. Programmed cooking

modes which have not started will not be restored and

must be reprogrammed.

 When using the oven in its ExtraLarge configuration, it

will not be possible to use the Main and Small Space

features: the SMALL SPACE and MAIN SPACE

FUNCTION knobs will be disabled.

Universal cooking functions

 All functions have a default cooking temperature which

may be adjusted manually to a value between 40°C and

250°C as desired.

For the BARBECUE function, the default power level value

is indicated as a percentage (%) and may also be

adjusted manually.

Start-up and use

2. Place the rotisserie

support in position 3 and

insert the spit in the hole

provided on the back

panel of the oven.

3. Begin spit roast

operation by selecting the

or functions.

Automatic cooking functions

 The temperature and cooking duration are pre-set

values, guaranteeing a perfect result every time -

automatically. These values are set using the C.O.P.®

(Programmed Optimal Cooking) system. The cooking

cycle stops automatically and the oven indicates when

the dish is cooked. The cooking duration may be modified

by a period of several minutes, as specified in the

description of the individual functions below.

ROAST function

Use this function to cook veal, pork, lamb and beef. Place

the food inside the oven while it is still cold. The dish may

also be placed in a preheated oven. It will only be

possible to adjust the duration by -10/+10 minutes.

BAKED CAKES function

This function is ideal for baking cakes. Place the food

inside the oven while it is still cold. The dish may also be

placed in a preheated oven. It will only be possible to

adjust the duration by -10/+15 minutes.

BREAD function

Use this function to make bread. Please see the following

chapter for the recipe and further details.

To achieve the best possible results, we recommend that

you carefully observe the instructions below:

 Follow the recipe.

 Remember to pour 150 g (150 ml) of cold water into

the baking tray, which should be placed in position

Place the food inside the oven while it is still cold. If you

wish to place the food in the oven after it has been

preheated, immediately following a high-temperature

cooking programme, the text Hot will appear on the

display until the temperature of the oven has fallen to 40°.

At this point it will be possible to place the bread in the

oven.

PIZZA function

Use this function to make pizza. Please see the following

chapter for further details. It will only be possible to adjust

MULTILEVEL function

All heating elements and the fan are activated. Since the heat

remains constant throughout the oven, the air cooks and

browns food in a uniform manner. A maximum of four racks

may be used at the same time. If you are using several

racks at the same time, we recommend you place the

dripping pan on the lower rack. If you are cooking on 4 levels

at the same time, we recommend you place the shelves on

racks 3, 5 and 6 and the dripping pan on rack 1.

GRATIN function

The top heating element and the rotisserie spit (where

present) are activated and the fan begins to operate.

During part of the cycle the circular heating element is

also activated. This combination of features increases the

effectiveness of the unidirectional thermal radiation

provided by the heating elements through the forced

circulation of the air throughout the oven.

This helps prevent food from burning on the surface and

allows the heat to penetrate right into the food. Always

cook in this mode with the oven door closed.

BARBECUE function

The top heating element and the rotisserie spit (where

present) are activated. By turning the TEMPERATURE

knob, the different power levels which may be set will

appear on the display; these range between 5% and

100%. The high and direct temperature of the grill is

recommended for food which requires a high surface

temperature. Always cook in this mode with the oven door

closed.

LOW TEMPERATURE function

This type of cooking can be used for proving, defrosting,

preparing yoghurt, heating dishes at the required speed

and slow cooking at low temperatures. The temperature

options are: 40, 65 and 90 °C.

FAST CLEAN mode

This mode cleans the oven automatically and thoroughly

by pyrolysis (see Maintenance and care).

! The default setting is 90 minutes.

Spit roast (only available in certain models)

To operate the spit roast function (see diagram) proceed as

follows:

1. Place the dripping pan in position 1.

the duration by -5/+12 minutes.

To achieve the best possible results, we recommend that

you carefully observe the instructions below:

 Follow the recipe.

 The weight of the dough should be between 350 g and

500 g.

 Lightly grease the dripping pan and the baking trays.

Place the food inside the oven while it is still cold. If you

wish to place the food in the oven after it has been

preheated, immediately following a high-temperature

cooking programme, the text Hot will appear on the

display until the temperature of the oven has fallen to

120°. At this point it will be possible to place the pizza in

the oven.

Recipe for PIZZA:

Makes 3 or 4 pizzas: 1000 g flour, 500 ml water, 20 g salt,

20 g sugar, 100 ml olive oil, 20 g fresh yeast (or 2 sachets

of powder yeast)

 Leavening at room temperature: 1 hour, or LOW

TEMPERATURE manual function set to 40°. Leave to

rise for approximately 30-45 minutes.

 Place the food inside the oven while it is still cold.

 Start the

PIZZA cooking mode.

Recipe for BREAD (maximum amount of dough):

Ingredients:

 1.3 kg flour

 700 g water

 25 g salt

 50 g fresh bakers yeast or 4 sachets dried yeast

powder.

Method:

 Mix the flour and salt in a large bowl.

 Dilute the yeast in lukewarm water (approximately 35

degrees).

 Make a small well in the mound of flour.

 Pour in the water and yeast mixture.

 Knead the dough by stretching and folding it over itself

with the palm of your hand for 10 minutes, until it has a

uniform consistency and is not too sticky.

 Form the dough into a ball shape, place it in a large

bowl and cover it with transparent plastic wrap to

prevent the surface of the dough from drying out. Place

the bowl in the oven, set to 40° using the LOW

TEMPERATURE manual function, and leave to rise for

approximately 3045 minutes. Alternatively, leave at

room temperature for approximately 1 hour (until the

dough has doubled in volume).

 Break up the dough, kneading gently, and divide it to

create several loaves.

 Place them on a sheet of baking paper (cut to the same

size as the inside of the dripping pan) on top of the

rack (or on 2 or 3 racks if you wish to cook the loaves

on different shelves) and dust them lightly with flour.

 Make a few incisions in the top using a sharp blade.

 Place the rack in the oven, on shelf level 2 if using only

one level, or place two racks on shelf levels 1 and 4 if

using two levels, or place three racks on shelf levels 1,

3 and 5 if using three levels.

 Place the dripping pan on shelf level 7 and pour in

150 g cold water.

 Place the food inside the oven while it is still cold.

 Start the automatic function

BREAD.

 When the cooking process has finished, leave the

loaves to rest on the rack until they have completely

cooled.

Small Space

Starting the oven

1. Fit the DIVIDER to the DIVIDER shelf D using the two

pins, with the arrows turned towards the rear part of the

oven. After it has been fitted correctly, you will be able to

read the text OPENSPACE on the front part of the

DIVIDER frame. A buzzer will sound to confirm that the

DIVIDER has been fitted correctly; it will then be possible

to use the two Main and Small space compartments

separately or at the same time.

 The EXTRALARGE SPACE FUNCTION knob will be

disabled.

2. Select the desired cooking function by turning the

SMALL SPACE FUNCTION knob.

3. The oven will begin its preheating stage. The

temperature may be changed by turning the

TEMPERATURE knob. The

indicator light flashes

during the pre-heating stage.

4. Once the pre-heating stage is completed, the

icon

stops flashing (becomes fixed) and a buzzer sounds. It is

now possible to introduce foodstuffs into the oven.

5. During cooking it is always possible to:

- Change the cooking function by turning the SMALL

SPACE FUNCTION knob.

- Change the temperature by turning the TEMPERATURE

knob.

- Set the cooking duration in addition to the cooking end

time.

- Stop cooking by turning the SMALL SPACE FUNCTION

knob to the 0 position.

6. If a blackout occurs while the oven is already in

operation, an automatic system within the appliance will

reactivate the cooking function from the point at which it

was interrupted, as long as the temperature has not

dropped below a certain level. Programmed cooking

modes which have not started will not be restored and

must be reprogrammed.

Cooking functions

GRILL function

The top heating element is activated. By turning the

TEMPERATURE knob, the different power levels which

may be set will appear on the display; these range

between 5% and 100%. The high and direct temperature

of the grill is recommended for food which requires a high

surface temperature. This function is particularly suitable

for browning food, cooking gratins, colouring meringues,

making toasted sandwiches and grilling small quantities

of thin, lean meat. Always cook in this mode with the oven

door closed.

FAST COOKING function

This function requires the oven to be preheated. This

function is particularly suitable for cooking pre-packed

food quickly (frozen or pre-cooked).

Main Space

Starting the oven

1. Fit the DIVIDER to the DIVIDER shelf D using the two

pins, with the arrows turned towards the rear part of the

oven. After it has been fitted correctly, you will be able to

read the text OPENSPACE on the front part of the

DIVIDER frame. A buzzer will sound to confirm that the

DIVIDER has been fitted correctly; it will then be possible

to use the two Main and Small space compartments

separately or at the same time.

 The EXTRALARGE SPACE FUNCTION knob will be

disabled.

2. Select the desired cooking function by turning the

MAIN SPACE FUNCTION knob.

3. The oven will begin its preheating stage. The

temperature may be changed by turning the

TEMPERATURE knob. The

indicator light flashes

during the pre-heating stage.

4. Once the pre-heating stage is completed, the

icon

stops flashing (becomes fixed) and a buzzer sounds. It is

now possible to introduce foodstuffs into the oven.

5. During cooking it is always possible to:

- Change the temperature by turning the TEMPERATURE

knob.

- Set the cooking duration in addition to the cooking end

time.

- Stop cooking by turning the MAIN SPACE FUNCTION

knob to the 0 position.

6. If a blackout occurs while the oven is already in

operation, an automatic system within the appliance will

reactivate the cooking function from the point at which it

was interrupted, as long as the temperature has not

dropped below a certain level. Programmed cooking

modes which have not started will not be restored and

must be reprogrammed.

Cooking functions

UNIVERSAL function

All heating elements and the fan are activated. Since the

heat remains constant throughout the oven, the air cooks

and browns food in a uniform manner. A maximum of

three racks may be used at the same time. If you are using

several racks at the same time, we recommend you place

the dripping pan on shelf level 1. If you are cooking on 3

levels at the same time, we recommend you place the

shelves on racks 3 and 5, and the dripping pan on rack 1.

Using the Small Space and Main Space at the

same time

Starting the oven

1. Fit the DIVIDER to the DIVIDER shelf D using the two

pins, with the arrows turned towards the rear part of the

oven. After it has been fitted correctly, you will be able to

read the text OPENSPACE on the front part of the

DIVIDER frame. A buzzer will sound to confirm that the

DIVIDER has been fitted correctly; it will then be possible

to use the two Main and Small space compartments

separately or at the same time.

 The EXTRALARGE SPACE FUNCTION knob will be

disabled.

 In order to improve the ovens energy efficiency, the pre-

heating time of the SMALL SPACE cavity lasts about 15

minutes.

 If the MAIN SPACE is set at a temperature below 150°C,

in order to safeguard the cooking results, the grill function

will not start: the display will visualise OFF.

2. Select the desired cooking function for each recess by

turning the SMALL SPACE FUNCTION and/or MAIN

SPACE FUNCTION knobs. The

icon indicates that the

Small Space has been selected and that it is therefore

possible to adjust the Small Space settings; the

icon

lit up on the display indicates that the Main Space has

been selected and that it is therefore possible to adjust

the Main Space settings.

3. Both ovens will begin the preheating stage. The

temperature may be changed by turning the

TEMPERATURE knob. The

indicator light flashes

during the pre-heating stage.

2. Next, press the button until the icon and the

three numerical digits on the DISPLAY begin to flash.

3. Turn the TIMER KNOB towards + and - to adjust

the hour value.

4. Press the

button again so that the other two

numerical digits on the DISPLAY begin to flash.

5. Turn the TIMER KNOB towards + and - to adjust

the minute value.

6. Press the

button again to confirm.

7. When the set time has elapsed, the text END appears

on the DISPLAY, the oven will stop cooking and a buzzer

sounds.

Programming has been set when the

and icons

flash. The DISPLAY shows the cooking end time and the

cooking duration alternately.

To cancel programming, turn the FUNCTION knob to the

0 position.

Practical cooking advice

MULTILEVEL

 Use positions 1, 3, 5 and 6.

 Place the dripping pan at the bottom and the rack at

the top.

BARBECUE

 Preheat the oven for 5 minutes.

 Keep the oven door closed when cooking in this mode.

 Place the dripping pan on shelf level 3. Place the rack

in a position between 4 and 7, depending on how bulky

the food is, and make sure the food is in the centre of

the rack. Examples: beef ribs should be cooked on

shelf level 4 and bacon on shelf level 6 or 7.

PIZZA or FOCACCIA

 Use a light aluminium tray with a maximum diameter of

30 cm, placing it on top of the rack supplied.

 If the pizza has a lot of toppings, we recommend

adding the mozzarella cheese on top of the pizza

halfway through the cooking process.

GRILL

 Preheat the oven for 5 minutes.

 Fit the DIVIDER to the DIVIDER rack D.

 Keep the oven door closed when cooking in this mode.

 Place the rack in position 7. Position the food in the

centre of the rack. Position the dripping pan on shelf

level 6.

 This function is particularly suitable for browning food,

cooking gratins, colouring meringues, making toasted

4. Once the pre-heating stage is completed, the

icon

stops flashing (becomes fixed) and a buzzer sounds. It is

now possible to introduce foodstuffs into the oven.

5. The digits on the display become brighter to indicate

which recess you are adjusting. To modify the settings for

the other recess, press the

button. The Small Space

and Main Space settings may actually be changed during

simultaneous cooking:

- Change the cooking function by turning the SMALL

SPACE FUNCTION and/or MAIN SPACE FUNCTION

knob.

- Change the temperature by turning the TEMPERATURE

knob.

- Set the cooking duration in addition to the cooking end

time.

- Stop cooking by turning the SMALL SPACE FUNCTION

and/or MAIN SPACE FUNCTION knob to the 0 position.

6. If a blackout occurs while the oven is already in

operation, an automatic system within the appliance will

reactivate the cooking function from the point at which it

was interrupted, as long as the temperature has not

dropped below a certain level. Programmed cooking

modes which have not started will not be restored and

must be reprogrammed.

Programming cooking

 A cooking function must be selected before

programming can take place.

Programming is possible in all oven configurations:

EXTRALARGE, MAIN and SMALL SPACE, even if the

latter two are being used simultaneously.

Programming the cooking duration

1. Press the

button several times until the icon and

the three digits on the DISPLAY begin to flash.

2. Turn the TIMER KNOB towards + and - to adjust the

duration.

3. Press the

button again to confirm.

4. When the set time has elapsed, the text END appears

on the DISPLAY, the oven will stop cooking and a buzzer

sounds.

 For example: it is 9:00 a.m. and a time of 1 hour and 15

minutes is programmed. The function will stop

automatically at 10:15 a.m.

Setting the end time for a cooking mode

 A cooking duration must be set before the cooking end

time can be scheduled.

1. Follow steps 1 to 3 to set the duration as detailed

above.

sandwiches and grilling small quantities of thin, lean

meat.

 We recommend that the power level is set to

maximum. The top heating element is regulated by a

thermostat and may not always operate constantly.

Cooking advice table for ovens with an ExtraLarge Space cavity

Cook on

no. of

shelves

Rack position

Function

Foods

Weight

(in kg)

No.

Dripping

pan

Rack 1

Rack 2

Rack 3

Preheating

Recommended

temperature

(°C)

Cooking

duration

(minutes)

Pies / Tarts

2 or 3

1 to 2

3 to 5

Yes

180

30-40

35-45

40-50

45-55

Cream puffs

2 or 3

1 to 2

3 to 5

Yes

190

25-35

30-40

Pizza

2 or 3

1 to 2

3 to 5

Yes

220

15-25

20-30

25-35

30-40

Biscuits

2 or 3

1 to 2

3 to 5

Yes

180

15-25

20-30

Pastries

2 or 3

Yes

200

30-40

35-45

40-50

Crème caramel

(bain-marie)

2 or 3

Yes

170

35-45

40-50

Panettone 1 1 or 2 Yes 160 45-60

Sponge cake made

with yoghurt

2 or 3

4 or 5

Yes

160

60-75

Sponge cake

2 or 3

Yes

190

30-35

35-40

40-45

Multilevel*

Large cut of meat 1 1 2 Yes 160 90-240

Rotisserie 1 2 3 No 200 35-75

Gratin 1 3 or 4 No 190 40-60

Large roast 1 1 2 No 200 90-120

Gratin*

Large roast game 1 1 2 No 200 90-120

Beef ribs 1 3 4 or 5 Yes 100% 20-30

Sausages 1 3 5 to 7 Yes 100% 10-20

Pork ribs 1 3 5 to 7 Yes 100% 15-25

Barbecue*

Bacon 1 3 5 to 7 Yes 100% 3-6

Proving / Defrosting

1 2 No 40

White meringues 4 1 3 5 6 No 65 8-12 hours**

Low

temperature

Meat / Fish 3 1 3 5 No 90 90-180**

Automatic

bread

Bread (see recipe)

7***

Automatic

roast

Roasts

1 2 3 No 60-90**

Automatic

baked

cakes

Desserts

35-60**

Automatic

pizza

Pizza (see recipe)

23-30**

25-35**

30-35**

35-40**

* The cooking times listed above are intended as guidelines only and may be modified according to personal tastes. Oven preheating times are set

as standard and may not be modified manually.

** The duration of the automatic cooking functions are set by default. The values in the table refer to the minimum and maximum duration, which

may be modified by the user, taking the default value as a starting point.

*** As stated in the recipe, pour 150

water into the drippin

pan.

FAST COOKING

 Preheat the oven, making sure the dripping pan is on

shelf level 6.

 When cooking frozen foods, always follow the

instructions on the packaging.

Cooking advice table for the Small Space feature

Function Foods Weight

(in kg)

Cook on

no. of

shelves

Rack position Preheating Recommended

temperature

(°C)

Cooking

duration

(minutes)

No. Dripping

pan

Rack 1 Divider

Fast

cooking*

Fish fillets 1 6 D Yes 180-200 20-30

Meat fillets 1 6 D Yes 180-200 30-40

Frozen pizza 1 6 D Yes

Frozen prepared foods 1 6 D Yes

Grill

Toast 1 - 6-7 D Yes 100% 3-5

Bacon 1 6 7 D Yes 100% 3-6

Pork steaks 1 6 7 D Yes 100% 15-25

* The cooking times listed above are intended as guidelines only and may be modified in accordance with personal tastes. Oven preheating times

are set as standard and may not be modified manually.

Cooking advice table for the Main Space feature

Function Foods Weight

(in kg)

Cook on

no. of

shelves

Rack position Preheating Recommended

temperature

(°C)

Cooking

duration

(minutes)

No. Dripping

pan

Rack 1 Divider

Universal*

Pies / Tarts 1

Yes

200

30-40

35-45

Cream puffs 1

Yes

190

25-35

Pizza 1

Yes

220

15-25

20-30

Biscuits 1

Yes

180

15-25

Pastries 1

Yes

200

30-40

35-45

Crème caramel (bain-

marie)

1 2 D Yes 170 35-45

Sponge cake made

with yoghurt

1 2 D Yes 160 60-75

Sponge cake 1

Yes

190

30-35

35-40

Small roasting joints 1 2 3 D Yes 210 30-60

* The cooking times listed above are intended as guidelines only and may be modified in accordance with personal tastes. Oven preheating times

are set as standard and may not be modified manually.

Cooking advice table for using the Small Space and Main Space at the same time

Small Space

Function Foods Weight

(in kg)

Cook on

no. of

shelves

Rack position Preheating Recommended

temperature

(°C)

Cooking

duration

(minutes)

No. Dripping

pan

Rack 1 Divider

Fast

cooking*

Fish fillets 1 6 D Yes 200-220 20-30

Meat fillets 1 6 D Yes 200-220 30-40

Frozen pizza 1 6-7 D Yes

Frozen prepared foods 1 6-7 D Yes

“Pilaf” rice 1 6 D Yes 180-200 30-45

Grill

Browning 1 6-7 D Yes 100% 3-6

Main Space

Function Foods Weight

(in kg)

Cook on

no. of

shelves

Rack position Preheating Recommended

temperature

(°C)

Cooking

duration

(minutes)

No. Dripping

pan

Rack 1 Divider

Universal*

Cakes, pies / tarts 1

1 and 2

3 to 5

Yes

200

30-40

35-45

Biscuits 1

1 and 2

3 to 5

Yes

180

15-25

Crème caramel (bain-

marie)

1 2 D Yes 160 45

Pizza 1

1 and 2

3 to 5

Yes

220

15-25

20-30

Potato gratin 1 2 D Yes 200 60

Roasting joint 1 2 D Yes 200 60-90

Dishes with pastry

crust

1 2 D Yes 200 35-45

* The cooking times listed above are intended as guidelines only and may be modified in accordance with personal tastes. Oven preheating times

are set as standard and ma

not be modified manuall

Precautions and tips

 This appliance has been designed and

manufactured in compliance with international safety

standards. The following warnings are provided for

safety reasons and must be read carefully.

General safety

 The appliance was designed for domestic use

inside the home and is not intended for

commercial or industrial use.

 The appliance must not be installed outdoors, even

in covered areas. It is extremely dangerous to

leave the appliance exposed to rain and storms.

 When moving or positioning the appliance, always

use the handles provided on the sides of the

oven.

 Do not touch the appliance with bare feet or with

wet or damp hands and feet.

 The appliance must be used by adults only for the

preparation of food, in accordance with the

instructions provided in this booklet.

 Do not touch the heating elements or certain parts of

the oven door when the appliance is in use; these

parts become extremely hot. Keep children well

away from it and do not touch the hot parts yourself.

 Make sure that the power supply cables of other

electrical appliances do not come into contact

with the hot parts of the oven.

 The openings used for the ventilation and

dispersion of heat must never be covered.

 Always grip the oven door handle in the centre:

the ends may be hot.

 Always use oven gloves when placing cookware

in the oven or when removing it.

 Do not use aluminium foil to line the bottom of the

oven.

 Do not place flammable materials in the oven: If

the appliance is switched on accidentally, the

materials could catch fire.

 Always make sure the knobs are in the l/

¡

position when the appliance is not in use.

 When unplugging the appliance, always pull the

plug from the mains socket; do not pull on the

cable.

 Never perform any cleaning or maintenance work

without having disconnected the appliance from

the electricity mains.

 If the appliance breaks down, under no

circumstances should you attempt to perform the

repairs yourself. Repairs carried out by

inexperienced individuals may cause injury or

further malfunctioning of the appliance. Contact a

Service Centre (see Assistance).

 Do not rest heavy objects on the open oven door.

 The appliance should not be operated by people

(including children) with reduced physical, sensory

or mental capacities, by inexperienced individuals

or by anyone who is not familiar with the product.

These individuals should, at the very least, be

supervised by someone who assumes responsibility

for their safety or receive preliminary instructions

relating to the operation of the appliance.

 Do not let children play with the appliance.

Disposal

 When disposing of packaging material: observe

local legislation so that the packaging may be

reused.

 The European Directive 2002/96/EC relating to

Waste Electrical and Electronic Equipment

(WEEE) states that household appliances should

not be disposed of using the normal solid urban

waste cycle. Exhausted appliances should be

collected separately in order to optimise the cost

of re-using and recycling the materials inside the

machine, while preventing potential damage to

the atmosphere and to public health. The

crossed-out dustbin is marked on all products to

remind the owner of their obligations regarding

separated waste collection. For further information

relating to the correct disposal of exhausted

household appliances, owners may contact the

relevant public service or their local dealer.

Respecting and conserving the

environment

 You can help to reduce the peak load of the

electricity supply network companies by using the

oven in the hours between late afternoon and the

early hours of the morning. The cooking mode

programming options, the delayed cooking

mode (see Cooking modes) and delayed

automatic cleaning mode (see Care and

Maintenance) in particular, enable the user to

organise their time efficiently.

 Always keep the oven door closed when using the

BARBECUE and GRATIN modes: this will achieve

improved results while saving energy

(approximately 10%).

 Check the door seals regularly and wipe them

clean to ensure they are free of debris so that

they adhere properly to the door, thus avoiding

heat dispersion.

Care and maintenance

Switching the appliance off

Disconnect your appliance from the electricity

supply before carrying out any work on it.

Cleaning the appliance

 The stainless steel or enamel-coated external

parts and the rubber seals may be cleaned using

a sponge that has been soaked in lukewarm water

and neutral soap. Use specialised products for

the removal of stubborn stains. After cleaning,

rinse and dry thoroughly. Do not use abrasive

powders or corrosive substances.

 The inside of the oven should ideally be cleaned

after each use, while it is still lukewarm. Use hot

water and detergent, then rinse well and dry with

a soft cloth. Do not use abrasive products.

 All accessories can be washed like everyday

crockery, and are even dishwasher safe.

 Never use steam cleaners or pressure cleaners on

the appliance.

Cleaning the oven door

Clean the glass part of the oven door using a

sponge and a non-abrasive cleaning product, then

dry thoroughly with a soft cloth. Do not use rough

abrasive material or sharp metal scrapers as these

could scratch the surface and cause the glass to

crack.

For more thorough cleaning purposes, the oven door

may be removed:

1. Open the oven door fully (see diagram).

2. Use a screwdriver to lift up and turn the small

levers F located on the two hinges (see diagram).

3. Grip

the door on the two outer

sides and close it

approximately half way. Pull

the door towards you lifting it

out of its seat (see diagram).

To replace the door, reverse

this sequence.

Inspecting the seals

Check the door seals around the oven at regular

intervals. If the seals are damaged, please contact

your nearest After-sales Service Centre (see

Assistance). We recommend that the oven is not

used until the seals have been replaced.

Replacing the light bulb

To replace the oven light bulb:

1. Remove the

glass cover of the

lamp-holder.

2. Remove the

light bulb and

replace it with a

similar one:

halogen lamp

voltage 230 V,

wattage 25 W,

cap G 9.

3. Replace the glass cover (see diagram).

 Do not touch the light bulb directly with your

hands.

Glass cover

Lamp

Oven

compartment

Automatic cleaning with the FAST

CLEAN function

With the FAST CLEAN mode, the internal

temperature of the oven reaches 500°C. The

pyrolytic cycle is activated, burning away food and

grime residues. Dirt is literally incinerated.

Keep children away from the appliance during the

automatic cleaning cycle as surfaces may become

very hot. Particles may ignite inside the oven due to

the combustion process. There is no cause for

concern: this process is both normal and hazard-

free.

Before initiating the FAST CLEAN mode:

 Remove large or coarse food residues from the

inside of the oven using a damp sponge. Do not use

detergents.

 Remove all accessories.

 Remove the DIVIDER.

 Do not place tea towels or pot holders over the

oven handle.

 If the oven is too hot, the pyrolytic cycle may not

start. Wait for the oven to cool down.

 The programme may only be started once the oven

door has been closed.

To enable the FAST CLEAN cycle, turn the

EXTRALARGE SPACE FUNCTION knob to

Press the

button. The TIMER KNOB may be

used to select the desired cleaning level; there are

three default time settings which cannot be

modified.

1. Economy (ECO): turn the knob towards -.

Duration 1 hour.

2. Normal (NOR): initial level. Duration 1 hour and 30

minutes.

3. Intensive (INT): turn the knob towards +.

Duration 2 hours.

4. Press the

button to confirm.

An end time for the FAST CLEAN cycle (as for a

normal cooking cycle) may be programmed (see

Programming the automatic cleaning end time).

Safety devices

 The

icon on the display, when lit, indicates

that the oven door was automatically locked as soon

as the temperature reached a high value.

 If a malfunction occurs, the heating elements will

be switched off.

 Once the oven door has been locked, you cannot

change the duration and cycle end time settings.

Programming the automatic cleaning end time

1. Press the

button until the icon and the two

digits on the DISPLAY begin to flash.

2. Turn the TIMER KNOB towards + and - to

adjust the hour value.

3. Press the

button again until the other two

digits on the DISPLAY begin to flash.

4. Turn the TIMER KNOB towards + and - to

adjust the minute value.

5. Press the

button again to confirm.

6. When the set time has elapsed, the text END

appears on the display and a buzzer sounds.

 For example: it is 9:00 a.m. and the Economy

(ECO) FAST CLEAN level has been selected, with

the default duration of 1 hour. 12:30 is scheduled as

the end time. The programme will start automatically

at 11:30 a.m.

Programming has been set when the

and

buttons are illuminated. The display shows the FAST

CLEAN end time and duration alternately.

Once the automatic cleaning cycle is over

You will have to wait until the temperature inside the

oven has cooled down sufficiently before you can

open the oven door. You will notice some white dust

deposits on the bottom and the sides of your oven;

remove these deposits with a damp sponge once

the oven has cooled down completely. Alternatively,

you can make use of the already heated oven, in

which case it is not necessary to remove the

deposits, they are completely harmless and will not

affect your food in any way.

Warning:

The appliance is fitted with an automatic diagnostic system which detects any malfunctions. Malfunctions are

displayed by messages of the following type: F, followed by numbers.

Call for technical assistance should a malfunction occur.

 Never use the services of an unauthorised technician.

Please have the following information to hand:

 The type of problem encountered.

 The appliance model (Mod.).

 The serial number (S/N).

The latter two pieces of information can be found on the data plate located on the appliance.

Assistance

ARISTON

PRIORITY SERVICE

If you are not completely satisfied with your appliance

or require service call:

Australia

Phone: 1300 815 589

New Zealand

Phone: (09) 306 1020

AUSTRALIA

ARISIT PTY LIMITED

40-44 Mark Anthony Drive, Dandenong South,

VIC 3175, Australia

Fax: Service & Sales (03) 9768 0838

Email: consumer.care@arisit.com

GENUINE ACCESSORIES

& SPARE PARTS

A wide range of genuine

accessories are available for your appliance call:

Australia

Phone: 03 9768 0888

New Zealand

Phone: (09) 306 1020

NEW ZEALAND

ARISIT PTY LIMITED

PO Box 68-140 Newton, Auckland

1145, New Zealand

Fax: (09) 302 0077

Email: [email protected].nz

OS 99D P IX

Sommaire

Installation, 18-19

Positionnement

Raccordement électrique

Caractéristiques techniques

Description de lappareil, 20

Vue densemble

Tableau de bord

Afficheur

Structure du four, 21

Mise en marche et utilisation, 22-28

Mise à lheure de lhorloge

Programmer la minuterie

ExtraLarge Space

Small Space

Main Space

Utilisation simultanée de Small Space et Main

Space

Comment programmer une cuisson

Conseils de cuisson

Tableau de cuisson ExtraLarge Space

Tableau de cuisson Small Space

Tableau de cuisson Main Space

Tableau de cuisson simultanée Small Space et Main

Space

Précautions et conseils, 29

Sécurité générale

Mise au rebut

Economies et respect de lenvironnement

Nettoyage et entretien, 30-31

Mise hors tension

Nettoyage de lfappareil

Nettoyage de la porte

Remplacement de lampoule déclairage

Nettoyage automatique avec la fonction FAST

CLEAN

Assistance, 32

Mode demploi

FOUR

Français, 17 Espanol, 33

Portuges, 49

English,1

FR ES

Aération

Pour garantir une bonne aération, la cavité

dencastrement doit être dépourvue de paroi arrière.

Il est conseillé dinstaller le four de manière à ce

quil repose sur deux cales en bois ou bien sur un

plan dappui continu qui ait une découpe dau moins

45 x 560 mm (voir figures).

Centrage et fixation

Positionner les 4 taquets situés sur les côtés du four

en face des 4 trous pratiqués sur le cadre et les

régler selon lépaisseur de la joue du meuble:

épaisseur 20 mm : enlever la

partie amovible du taquet (voir

figure) ;

épaisseur 18 mm : utiliser la

première rainure, comme

prévu par le fabricant (voir

figure) ;

épaisseur 16 mm : utiliser la

deuxième rainure (voir figure).

Pour fixer lappareil au meuble : ouvrir la porte du

four et visser 4 vis à bois dans les 4 trous du cadre.

 Toutes les parties qui servent de protection doivent

être fixées de manière à ne pouvoir être enlevées

quavec laide dun outil.

 Conserver ce mode demploi pour pouvoir le

consulter à tout moment. En cas de vente, de

cession ou de déménagement, veiller à ce qufil

suive lfappareil pour informer le nouveau

propriétaire sur son fonctionnement et lui fournir les

conseils correspondants.

 Lire attentivement les instructions : elles

contiennent des conseils importants sur linstallation,

lutilisation et la sécurité de cet appareil.

Positionnement

 Les emballages ne sont pas des jouets pour

enfants, il faut les mettre au rebut en respectant la

réglementation sur le tri sélectif des déchets (voir

Précautions et conseils).

 Linstallation doit être effectuée par un

professionnel du secteur conformément aux

instructions du fabricant. Une mauvaise installation

peut causer des dommages à des personnes, des

animaux ou des biens.

Encastrement

Pour garantir le bon fonctionnement de lappareil, il

faut que le meuble possède des caractéristiques

bien précises :

 les panneaux adjacents doivent être fabriqués

dans un matériau résistant à la chaleur;

 dans le cas notamment de meubles plaqués bois,

il faut que les colles résistent à une température

de 100°C;

 la cavité du meuble pour encastrement du four,

tant sous plan (voir figure) quen colonne, doit

avoir les dimensions suivantes :

 Après encastrement de lappareil, il ne doit plus y

avoir possibilité de contact avec les parties

électrifiées.

Les déclarations de consommation indiquées sur

létiquette des caractéristiques ont été mesurées

pour ce type dinstallation

595 mm.

24 mm.

545 mm.

5 mm.

576 mm.

23 mm.

593 mm.

45 mm.

558 mm.

. m

Installation

560 m

45 mm.

Raccordement électrique

!Les fours munis dun câble dalimentation tripolaire

sont prévus pour un fonctionnement au courant

alternatif à la tension et à la fréquence indiquées sur

la plaque signalétique apposée sur lappareil (voir

ci-dessous).

Montage du câble dalimentation

1. Pour ouvrir le bornier, faire pression à laide dun

tournevis sur les

languettes latérales du

couvercle : tirer et ouvrir

le couvercle (voir

figure).

2. Montage du câble

dalimentation :

dévisser la vis du serre-

câble ainsi que les trois

vis des contacts L-N-

puis fixer les fils

sous les têtes de vis

en respectant les

couleurs Bleu (N)

Marron (L) Jaune-Vert

(voir figure).

3. Fixer le câble dans

le serre-câble prévu.

4. Fermer le couvercle

du bornier.

Branchement du câble dalimentation au réseau

électrique

Monter sur le câble une prise normalisée pour la

charge indiquée sur létiquette des caractéristiques

(voir ci-contre).

En cas de raccordement direct au réseau, il faut

intercaler entre lappareil et le réseau un interrupteur

à coupure omnipolaire ayant au moins 3 mm

décartement entre les contacts, dimensionné à la

charge et conforme aux normes en vigueur (le fil de

terre ne doit pas être interrompu par linterrupteur).

Le câble dalimentation ne doit atteindre, en aucun

point, une température dépassant de 50 °C la

température ambiante.

 Linstallateur est responsable du bon raccordement

électrique de lappareil et du respect des normes de

sécurité.

Avant de procéder au branchement, sassurer que :

 la prise est bien munie dune terre conforme à la loi ;

 la prise est bien apte à supporter la puissance

maximale de lappareil, indiquée sur la plaque

signalétique (voir ci-dessous) ;

 la tension dalimentation est bien comprise entre

les valeurs indiquées sur la plaque signalétique

(voir ci-dessous) ;

 la prise est bien compatible avec la fiche de

lappareil. Si ce nest pas le cas, remplacer la

prise ou la fiche, ne pas utiliser de rallonges ni de

prises multiples.

 Après installation de lappareil, le câble électrique

et la prise de courant doivent être facilement

accessibles

 Le câble ne doit être ni plié ni excessivement

écrasé.

 Il doit être contrôlé périodiquement et ne peut être

remplacé que par un technicien agréé (voir

Assistance).

 Nous déclinons toute responsabilité en cas de

non respect des normes énumérées ci-dessus.

PLAQUE SIGNALÉTIQUE

Dimensions

largeur 43,4 cm

hauteur 39,5 cm

profondeur 40,8 cm

Volume

l 70

Raccordements

électriques

tension 220-240V~ 50 Hz ou

puissance maximum

absorbée 3400W (voir plaque

signalétique)

ETIQUETTE

ENERGIE

Directive 2002/40/CE sur

l'étiquette des fours

électriques Norme EN 50304

Consommation énergie

déclaration Classe convection

Forcée – fonction four :

Gratin.

Cet appareil est conforme aux

Directives Communautaires

suivantes : 2006/95/CEE du

12.12.06 (Basse Tension) et

modifications successives -

89/336/CEE du 03/05/89

(Compatibilité

Electromagnétique) et

modifications successives -

93/68/CEE du 22/07/93 et

modifications successives.

2002/96/CE

Tableau de bord

Support GRILLE

Support LÈCHEFRITE

GLISSI

RES

de coulissement

niveau 5

niveau 4

niveau 3

niveau 7

niveau 6

niveau Séparateur "D"

niveau 2

niveau 1

Support SÉPARATEUR

Description de

lappareil

Vue densemble

Tableau de bord

Afficheur

Bouton

FONCTIONS

EXTRALARGE SPACE

Bouton

SÉLECTION

TEMPÉRATURE/TEMPS

AFFICHEUR

Touche

SÉLECTION

TEMPS

Touche

SÉLECTION ENCEINTE

Bouton

FONCTIONS

MAIN SPACE

Bouton

FONCTIONS

SMALL SPACE

¡•OC

•• ••

¡•OC

•• ••

Chiffres

TEMPERATURE et TEMPS

Icône

FIN DE CUISSON

Icône

DURÉE

Icône

MINUTEUR

Icône

ENCEINTE

SÉLECTIONNÉE

Icône

PORTE VERROUILLEE

La page charge ...

Ariston OS 99D P IX Mode d'emploi

Marque: Ariston

Modèle: OS 99D P IX

Catégorie: Fours

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Ariston OS 99D P IX User guide
español: Ariston OS 99D P IX Guía del usuario
português: Ariston OS 99D P IX Guia de usuario

Ariston OS 99D P IX Mode d'emploi

Ariston OS 99D P IX Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents