ICF18, ICF32, ICF40, ICF60, ICF80DZ Safety instructions
13
Please read these instructions carefully and follow all instructions, guidelines, and warnings included in
this product manual in order to ensure that you install, use, and maintain the product properly at all times.
These instructions MUST stay with this product.
By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings
carefully and that you understand and agree to abide by the terms and conditions as set forth herein. You
agree to use this product only for the intended purpose and application and in accordance with the
instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all
applicable laws and regulations. A failure to read and follow the instructions and warnings set forth herein
may result in an injury to yourself and others, damage to your product or damage to other property in the
vicinity. This product manual, including the instructions, guidelines, and warnings, and related documen-
tation, may be subject to changes and updates. For up-to-date product information, please visit
dometic.com.
!WARNING!
Also observe the safety instructions on page 3 to page 4.
1 Safety instructions
DDANGER! Failure to obey these warnings will result in death or serious
injury.
Electrocution hazard
• On boats: If the device is powered by the mains, ensure that the power supply
has a residual current device (RCD), a residual current circuit breaker (RCCB),
or a ground fault circuit interrupter (GFCI). Installation, especially in potentially
damp areas, must be in accordance with all applicable installation regulations.
• Do not touch exposed cables with your bare hands. This applies especially
when operating the device from the AC mains.
• Before starting the device, ensure that the power supply line and the plug are
dry.
!WARNING! Failure to obey these warnings could result in death or serious
injury.
Electrocution hazard
• Do not operate the cooling device if it is visibly damaged.
• If the cooling device's power cable is damaged, it must be replaced with a suit-
able power cable or assembly available from the manufacturer or its service
agent to prevent safety hazard.
• This cooling device may only be repaired by qualified personnel. Improper
repairs can lead to considerable hazards.
Find the full operating manual online on
qr.dometic.com/beHMWQ
Igloo ICF18, ICF32, ICF40, ICF60, ICF80DZ_SOM_4445104081_ AMER_202x-xx-xx.book Page 13 Thursday, October 26, 2023 7:01 PM