HEAT EXPERIENCE 9V Outdoor Series Manuel utilisateur

Marque: HEAT EXPERIENCE

Modèle: 9V Outdoor Series

Taper: Manuel utilisateur

9V OUTDOOR SERIES

USER MANUAL

BRUKSANVISNING

ANVÄNDARMANUAL

BETRIEBSANLEITUNG

KÄYTTÖOHJE

MANUEL UTILISATEUR

MANUAL DE USUARIO

MANUALE UTENTE

MANUAL DO USUÁRIO

FRONT

Power button

High quality YKK zippers

Powerbank pocket inside

Front heating elements

placed over chest

BACK

Back heating elements

is placed over lower back

BEFORE USE

Congratulations on your new Heat Experience Heated Hybrid Jacket

Before you start using it, there are some things you should know.

The battery should be fully charged before ﬁrst use, or after a long

period of no use (2 months or more).

Charge the battery by connecting it to a charger. Do not charge

unattended.

The heat can be adjusted either using the button, or our app. To

download the Heat Experience Remote App, scan the qr-code on the

back of this document, or visit https://heatexperience.no/app/

We recomend that you get to know how the product works before you

head out on longer adventures.

GETTING STARTED

Open the zipper on the powerbank pocket, placed on the inside.

Connect the powerbank to the cable before inserting it into the

pocket. Close the pocket zipper.

Note: Do not turn the powerbank on before connecting, this will

possibly lead to the power switching off after a few minutes.

Press and hold the power button for ~5 seconds, until the light

turns on. The heating system goes directly to boost mode, which is

the warmest heating level. Press the button to switch between the

four heating levels. The white blinking light indicates the system is

ready for bluetooth connection.

The heating level can also be adjusted using our app, which gives

you even more possibilities to ﬁne-tune the heat, and a broader

range of adjustment. Download and open the app, activate

bluetooth on your phone, then select “add new product”. Note that

location services needs to be activated to use the app. The app will

not collect or save any personal data.

1. CHARGE POWERBANK

2. CONNECT POWERBANK

3. HOLD BUTTON 5 SEC. TO TURN ON AND OFF

4.  ALT. 2.  APP CONTROL

-download and open app

-activate bluetooth on phone

-select “add new product”

-choose correct product

*Location services needs to be

activated to use the app. We do not collect

or save any personal information.

4.  ALT. 1.  POWER BUTTON CONTROL

short press to select heat level

CARE AND MAINTENANCE

Before washing the garment, remember to remove the powerbank

and add the protection cap to the usb cable.

Follow the instructions on the care label, to ensure maxiumum

lifespan of your heated product.

Hang dry the garment. Remove the protection cap after washing to

let the connection dry properly before use.

Allow to dry after use, and store the product disconnected from

powerbank and charger. Charge powerbank to about 50% for long

term storage. Allow product to cool down before storing.

A spare powerbank is a good idea if you use your product for

prolonged time, remember to keep the extra powerbank at a

temperature as close to room temperature as possible. A cold

powerbank will have reduced output.

• Keep out of high temperatures. The polymer lithium battery may

explode or be damged if exposed to high temperatures or ﬁre.

• Do not charge unattended, use only original charger. Disconnect

charger after use.

• Battery may explode if disposed of in ﬁre.

• Do not crush or dissasemble.

• All components should be recycled in according to local laws and

regulations.

• Keep the heated garment away from children - not to be used by very

young children (0-3 years). Not to be used by children over the age of

three, unless the controls have been pre set by a guardian, or unless the

child is adequately instructed on how to operate the controls safely.

• Should not be used by users unable to feel changes in temperature. If

you experience any signs of burns or discomfort, please check product

before further use.

• This appliance is not intended for medical use in hospitals

• Always disconnect battery when not in use.

• When storing the appliance, allow it to cool down beforehand.

CAUTION

• Examine the appliance frequently for signs of wear or damage. If there

are such signs, if the appliance has been misused or does not work,

stop using the product and contact the supplier for further information.

• Do not insert pins.

• Electronic Equipment are known to interfere with avalanche beacon

reception. Switch off while searching. Read your beacon instructions for

more information.

Level Temperature* Indicator light Duration*

LOW ~35°C/95°F ●○○○ 7 hours

MEDIUM ~40°C/104°F ●●○○ 4,5 hours

HIGH ~45°C/113°F ●●●○ 2,5 hours

BOOST ~50°C/122°F ●●●● 1,5 hours

OPERATION WITH POWER BUTTON

*Duration based on using a 10.000mAh powerbank.

*This product is designed to work with powerbanks with 9V

PowerDelivery (PD) compatability. Any other type of powerbank

might cause a lower temperature output, or no function at all.

*The duration and given temperature will vary depending on

ambient temperature and conditions.

OPERATION WITH APP

*Duration based on using a 10.000mAh powerbank.

*This product is designed to work with powerbanks with 9V

PowerDelivery (PD) compatability. Any other type of powerbank

might cause a lower temperature output, or no function at all.

*The duration and given temperature will vary depending on

ambient temperature and conditions.

By using the Heat Experience app, you can take full control over your

heating system. The app will allow you to ﬁne tune the temperature

to your needs, and also gives you the possibility to maximize the run

time by lowering the output below what is possible using the power

button.

Using the app the temperature can be adjusted from approximately

50°C to 20°C. At the lowest output this will give you operating times

over 10 hours, given reasonable circumstances.

Scan this code with your mobile phone

to download the app.

www.heatexperience.app

HeatX Battery Heated Garments

Turn your layers

ON and OFF

CONTACT

Do you have any more questions, feel free to reach out;

e-mail: [email protected]

Address:

Heatexp AS

Østre Rosten 102b

7075 Tiller

NORWAY

Read more about Heat Experience, discover new products, and get

inspired on our webpage www.heatexperience.eu

facebook.com/theheatexperience

Instagram: Heat Experience

We hope you enjoy your product.

Kind regards, The Heat Experience Team.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by manufacturer

could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

RF Exposure Information

ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.

Thedevicecanbeusedinportableexposurecondition, compliance with exposure

requirements.

Pour télécharger ce manuel de l’utilisateur dans une autre

langue, rendez-vous sur heatx.eu/support.

Para descargar este manual de usuario en otro idioma, visite

heatx.eu/support.

Per scaricare questo manuale utente in un’altra lingua, visita

heatx.eu/support.

Para baixar este manual do usuário em outro idioma, acesse

heatx.eu/support.

För att ladda ner den här bruksanvisningen på ett annat språk,

besök heatx.eu/support

HEAT EXPERIENCE 9V Outdoor Series Manuel utilisateur

Marque: HEAT EXPERIENCE

Modèle: 9V Outdoor Series

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: HEAT EXPERIENCE 9V Outdoor Series User manual

HEAT EXPERIENCE 9V Outdoor Series Manuel utilisateur

HEAT EXPERIENCE 9V Outdoor Series Manuel utilisateur

dans d''autres langues

Autres documents