Haier LET24C400F Manuel utilisateur

LED LCD TV RECEIVER

USER MANUAL

Please read this manual carefully before using

your television and keep this manual in a good

place for future reference.

MODEL:

LET22C400F

LET24C400F

LET26C400F

LET19C400F

02 Introduction

03 Remote Control

05

Main Parameter …………………………………………………………………

Control Panel ……………………………………………………………………

Rear/Side Sockets ………………………………………………………………

Connecting your T …………………………………………………………………

Remote Control …………………………………………………………………

Trouble shooting

Trouble shooting ………………………………………………………………

04 Operation

Installation Guide …………………………………………………………………

01 Safety and warnings

Welcome …………………………………………………………………………

Important information ……………………………………………………………

Safety notice ……………………………………………………………………

Warnings and cautions …………………………………………………………

Specification ……………………………………………………………………

V

P.05

P.11

P.12

P.14

P.24

P.16

P.02

P.03

P.04

P.25

Common interface ………………………………………………………………… P.13

Base Stand Assembly Instruction …………………………………………… P.07

Wall Mounting Installation Guidelines ………………………………………… P.09

P.02

Thanks

for buying this 19"/ 22"/24"/26"

LED LCD TV. This guide will help you set up and begin using your TV.

19" HD Ready LED LCD TV.

Remote control

AAA ba x2

Instruction Manual

Quick start guide

ttery

22" Full HD 1080P Digital LED LCD TV

Remote control

AAA ba x2

Instruction Manual

Quick start guide

ttery

24" Full HD 1080P Digital LED LCD TV

Remote control

AAA ba x2

Instruction Manual

Quick start guide

ttery

Stand

Now you can get star

ted!

IMPOR

TANT INFORMATION

READ ALL INSTRUCTIONS BEFORE USE AND KEEP FOR FUTURE REFERENCE.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).NO USER SERVICEABLE PARTS INSIDE.

FOR ANY PROBLEMS, REFER SERVICING TO THE CUSTOMER HELP LINE. THERE IS A LIGHTNING ARROW SYMBOL IN

THE TRIANGLE: THIS SYMBOL INDICATES HIGH VOLTAGE IS PRESENT INSIDE. IT IS DANGEROUS TO MAKE ANY KIND OF

CONTACT WITH ANYINSIDE PART OF THIS PRODUCT.

THERE IS A EXCLAMATION MARK IN THE TRIANGLE: THIS SYMBOL ALERTS YOU THAT IMPORTANT LITERATURE

CONCERNING OPERATION AND MAINTENANCE HAS BEEN INCLUDED WITH THIS PRODUCT.

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK AND FIRE, DO NOT PUT THE TV SET NEAR

SOURCES OF HUMIDITY. DO NOT USE ANY ABRASIVE CLEANERS WHICH MAY SCRATCH OR DAMAGE

THE LCD SCREEN. AVOID CONTACT WITH OBJECTS THAT MAY SCRATCH THE LCD SCREEN.

NOTE: SERVICING THE UNIT

YOURSELF IS UNAUTHORISED AND COULD LEAD TO INJURY OR PRODUCT

DAMAG

E. REFER ALL SERVICING TO THE CUSTOMER HELPLINE.

Stand Stand

26" Full HD 1080P Digital LED LCD TV

Remote control

AAA ba x2

Instruction Manual

Quick start guide

ttery

Stand

P.03

the

P.04

WARNINGS AND CAUTIONS

Warning

High voltages are used in the operation

of this television receiver. Do not remove

the cabinet back from your set. Refer

servicing to qualified service personnel.

Warning

To prevent fire or electrical shock

hazard, do not expose the television

receiver to rain or moisture.

Warning

Do not drop or push objects into the

television cabinet slots or openings.

Never spill any kind of liquid on the

television receiver.

Caution

Do not block the ventilation holes in the

back cover. Adequate ventilation is

essential to prevent failure of electrical

components.

Caution

Do not trap the power supply cord under

the television receiver.

Caution

Never stand on, lean on, or suddenly push

the television or its stand. You should pay

special attention to children. Serious injury

may result if it should fall.

Caution

Do not place your television on an unstable

cart, stand, shelf or table. Serious injury to

an individual , and damage to the

television, may result if it should fall.

Caution

When the television receiver is not

used for an extended period of time, it

is advisable to disconnect the AC power

cord from the AC outlet.

Dim:5 15*32 0mm(不包括底座）

Caution

If the television is to be built into a

compartment or similar enclosure, the

minimum distances must be maintained.

Heat build-up can reduce the service life of

your television, and can also be dangerous.

01

Safety and warnings

Introduction

INSTALLATIONCAUTION

*Locate the TV in the room where light

does not strike the screen directly.

*Total darkness or a reflection on the

picture screen can cause eyestrain. Soft

and indirect lighting is recommended for

comfortable viewing.

*Allow enough space between the TV and

the wall to permit ventilation.

*Avoid excessively warm locations to

prevent possible damage to the cabinet or

premature component failure.

*Do not cover the ventilation openings

when using theTV.

Never tamper with any components inside

the TV, or any other adjustment controls not

described in this manual. All LED-TV's are

high voltage electrical equipment.

When you clean dust or any water drops off

the SCREEN or CABINET or around any of

the buttons or connectors, the power cabled

should be removed from the power socket.

Wipe the TV with a soft, dry, dust free cloth.

During thunderstorms, unplug the power

cable and aerial / antenna cable to prevent

damage to your TV and any other devices

connected to it.

All repairs to this TV should only be

performed by qualified TV service

personnel.

Panel

Input Power Voltage

Main parameter

Main features

02

100-240V~ 50/60Hz

Terminals:

Analog RGB(PC)x1

Video Input x1

Audio Input x1

USB Input x1

YPbPr x1

SCART x 1

COMMON INTERFACE(CI)

PC audio x1

HEADPHONE x 1

RF Co-Ax x 1

Composite Video

input >=350

YPbPr >=400

Horizontal definition (TV line)

2x3W

Audio Output Power

(THD 7%)

High-Definition Multimedia Interface (HDMI) x 2

Used as Television, display terminal,

PC display；

High luminance, wide viewing

Angle；

4 NICAM；

3

HDMI interface and SCART

Interface；

5 T ；ime-shift

2

1

Standby Power consumption

<0.5W

P.05

19" 22" 24" 26"

PRESET MODE

PC

02

Introduction

3

5

6

1024x768

1280x1024

60

1

640x480

60 31.47

2

800x600

60 37.88

48.36

63.98

RESOLUTION

V.Freq.(Hz) H.Freq.(KHz)

4

1360x768

60 47.7

1920x1080

(Only for 21.5",23.6",26")

60

66.64

P.06

INSTALLATION NOTES

Locate the TV in a room where light does not strike the screen directly. Total darkness

or a reflection on the screen can cause eyestrain. Soft and indirect lighting is

recommended for comfortable viewing.

Allow enough space between the TV and the wall to permit ventilation.

Avoid excessively warm locations to prevent possible damage to the cabinet or

premature component failure.

Base Stand Assembly Instruction

1. Place the TV with the display side down

on a flat surface.Use a cloth to protect.

Locate the bottom at the stand.

2. Fix the bottom with turning the screw

tightly on the stand.

19"/22"/24"

P.07

26"

INSTALLATION NOTES

Locate the TV in a room where light does not strike the screen directly. Total darkness

or a reflection on the screen can cause eyestrain. Soft and indirect lighting is

recommended for comfortable viewing.

Allow enough space between the TV and the wall to permit ventilation.

Avoid excessively warm locations to prevent possible damage to the cabinet or

premature component failure.

Base Stand Assembly Instruction

1. Insert the stand support pillar into the stand as the arrow indicated

direction, and then fastened with three screws.

2. Insert the stand Ass'y into back cover as the arrow indicated direction,

and then fastened with screws. one

P.08

WALL MOUNTING INSTALLATION GUIDELINES

This television can be wall mounted as follows:

1.Place the LED LCD Television onto a solid surface. Please place some soft material

over the front of the screen to protect it from any damage.

2.Remove the screws from the lower part of the television, where the base joins to the

TV, and take away the stand (put the stand somewhere safe for future use).

3.Use the four screws provided to fix the TV onto a wall mounting bracket (not included)

via the four VESA standard holes on the back of the television.

02

Introduction

100mm

19"/22"/24"

M4X5

P.09

WALL MOUNTING INSTALLATION GUIDELINES

This television can be wall mounted as follows:

1.Place the LED LCD Television onto a solid surface. Please place some soft material

over the front of the screen to protect it from any damage.

2.Remove the screws from the lower part of the television, where the base joins to the

TV, and take away the stand (put the stand somewhere safe for future use).

3.Use the four screws provided to fix the TV onto a wall mounting bracket (not included)

via the four VESA standard holes on the back of the television.

02

Introduction

26"

200mm

100mm

M4X5

P.10

Front control panel

SOURCE

MENU

CH+

CH-

VOL+

VOL-

STANDBY

1

2

3

4

5

1

2

3

Remote control sensor.

Indicator LED:

BLUE: POWER ON. RED: STAND BY.

Key board.

Rear/Side Sockets

1

SOURCE

Display the input source menu.

MENU

Display main MENU.

3

4

CH+/CH-

In TV mode,press CH+ or CH- to change

the channel up and down.

In MENU, press CH+ or CH- to select items .

In standby mode, it can Turn on the TV.

STANDBY

2

VOL+/VOL-

Adjust sound level.

In MENU,adjust the item that you Selected.

5

3

1

2

COMMON INTERFACE (CI)

USB

1 2 3

4 5 6

7 8 9 0

+

CH

_

+

_

VOL

30 30

1

VIDEO

2

input

3

4

input

5

input

8

9

10

L/R AUDIO

11

12

input

6

input

SCART

HEADPHONE

PC AUDIO

VGA

input

analogue audio output

USB

COMMON INTERFACE(CI)

YPbPr

7

input

HDMI2

5

6 7 8 9

10 11 12

3

1 2

4

P.11

input

HDMI1

input

RF

P.12

02

Introduction

HEADPHONE OUTPUT

Insert the plug of the earphone into the earphone

jack on the unit HEADPHONE. The speakers

are now muted.

CONNECTING YOUR

TV

Haier

The common interface (CI) slot is designed to

accept the conditional Access (CA) Module

and Smart card in order to view the pay TV

programmes and additional services.

Contact your Common Interface service

provider to get more information about the

modules and subscription.

Please noted that CA modules and smart

cards are neither supplied nor optional

accessories from us.

COMMON INTERFACE

ATV Manual Tuning

Programme Edit

Signal Information

< >

CHANNEL

Auto Tuning

DTV Manual Tuning

Software Update(USB)

Software Update(OAD)Off

CI Information

P.13

P.14

E

T

EXT

SELECTING A PAGE

DIRECT ACCESS

TO THE ITEMS

INDEX

SUB PAGE

HOLD

REVEAL

Press:

You will obtain :

LIST

TELETEXT

Enter the number of the page required using the 0 to 9 up/down.

Example: page 120, enter 120. The number is displayed top left, the

counter turns and then the page is displayed. Repeat this operation to

view another page. If the counter continues to search, this means

that the page is not transmitted. Select another number.

Coloured are as are displayed at the bottom of the screen. The 4

coloured keys are used to access the items or corresponding pages.

The coloured areas flash when the item or the page is not yet

available.

This returns to the contents page (usually page 100).

Certain pages contain sub-pages which are automatically

displayed successively. This key is used to stop or resume sub-

page acquisition. The indication appears top left.

To freeze the page.

To display or hide the concealed information (games solutions).

The user can set four favorite pages to be directly linked to the four

color keys. While list mode is activated, it is not possibility to use TOP

or FLOF navigation with the colorkeys. The favorite page numbers

should be stored and restored to/from nonvolatile memory for each

channel by the system software.

This is used to call or exit teletext modes. The summary appears with

a list of items that can be accessed. Each item has a corresponding

3 digit page number. If the channel selected does not broadcast

teletext, theindication 100 will be displayed and the screen will

remain blank (in this case, exit teletext and select another channel).

Teletext is an information system broadcast by certain channels which can be

consulted like a newspaper. It also offers access to subtitles for viewers with hearing

problems or who are not familiar with the transmission language(cable networks,

satellite channels, etc.)

REMOTE CONTROL

P.15

WELCOME!

Thank you for choosing

Password

Please enter old password

Please enter new password

Confirm new password

Home Mode

Mode Select

OK

Shop Mode

OPERATION

04

Operation

The installation guide only appear when the TV

first time turn on or reset to factory set.

Installation Guide

P.16

Dansk

Deutsch

Hrvatski

Italiano

Please select an OSD Language

OK

Magyar

Nederlands

Norsk

PolskiEnglish

Cesky

E ka

Espanol

~

Fran ais

Portugues

Pycck

Switzerland

NewZealand

Norway

Poland

Portugal

Slovenia

Spain

Sweden

Country

OK

Rumania

Russian

Serbia

Morocco

Tunis

Algeria

UK

You can choose OSD language,Home/Shop mode

and country, auto tuning programs .And after

tuning the screen will skip to the first DTV program.

Note:The default password is 6666.

HOME or SHOP modes

1. Home Mode is an energy-saving Mode. Home

Mode is recommended for normal viewing setting

and is set as default during manufacturer.

2. Shop Mode is an option for retailers for

Advertising or product presentation.

Shop Mode has a brighter image than Home Mode.

3. You may switch between Home or Shop Mode

as you choose.If you c

hoose Shop Mode ,it will

enter HDMI1 source automatically,and you wil

press Exit key to exit POP menu.

1.CHANNEL MENU

The first item of the MENU is channel menu( for

TV or DTV source only).

You can search channels and edit programs here.

1).Auto tuning:

Search all the channels automatically(you can

select ATV and DTV)

ATV Manual Tuning

Programme Edit

Signal Information

< >

CHANNEL

Auto Tuning

DTV Manual Tuning

Software Update(USB)

Software Update(OAD)Off

CI Information

Tune Type DTV+ATV

Germany

Greece

Hungary

Italy

Luxembourg

Netherlands

Norway

Poland

Portugal

MENU

Pls press to select country at first , then

press OK button to start auto tuning .

Channel Tuning

TV : 0 Programme(s)

DTV : 0 Programme(s)

Radio : 0 Programme(s)

Data: 0 Programme(s)

96% UHF CH 68 DTV

NOTE:

All the channels including ATV, DTV and Radio

can be tuning by one time,if the Tune Type is

DTV+ATV .

All the stored channels will be disappear after

auto tuning .

After auto tuning , the channel will skip to

the first DTV channel.

2).DTV Manual tuning:

You can select a DTV channel then find the

program in this channel.

Pls press to select the channel , then press

OK to search the programs .

NOTE:

Bad Normal Good means signal intensity.

NOTE:

1).There are four picture modes can be

selected standard,mild,user,Eco

(energy-saving mode).

2).Tint is available in NTSC system only.

3).There are four colors temperature modes

can be selected medium, warm, cool,user

4).Screen is available in PC mode only which,

can adjust Horizontal position, vertical

position, size and phase.

3.SOUND MENU

The third item of the MENU is the SOUND

MENU.

You can adjust the sound effect here such as

treble, bass, balance etc.

Press to move, press OK to adjust.

Note:

Auto volume: only available when the input

signal volume is too large or distortion.

Favourite

Press to choose the program , press FAV

button , it will show on the right side of the

program.Choose the FAV program , press

FAV button again , you can cancel the FAV,

the will disappear .

Once your favorite group is created, you can

press the FAV key to quickly access your favorite

channel.

The second item of the MENU is PICTURE MENU.

You can adjust picture effect here, such as

contrast, brightness, etc.

Press OK to move, press OK to adjust.

2. PICTURE MENU

5). CI information: (optional)

This menu can display the CI card' s information.

Color Temperature

Aspect Ratio

Noise Reduction

Screen

Picture Mode Standard

< >

PICTURE

MENU

Picture Mode Standard

Contrast 82

Brightness 50

Color 50

Sharpness 50

Tint 50

Color Temperature Medium

Red 40

Green 31

Blue 50

MENU

Use the Arrow Buttons to select the channel you

wish to move. Then press the Yellow Button to

select Move function. Once active, enter the

number button and then press OK to confirm.

NOTE:

Press teletext red button to storage to channels

after manual tuning .

4). Program edit:

You can Delete ,Rename ,Move, Skip , FAV any

programs.

Press teletext red button , the program in cursor

will delete.

Delete

Press to choose the program , press teletext

blue button to skip this program, The will

show on the right side of the program .

Choose the skipped program, press blue button

again , you can cancel the skip ,The will

disappear .

ATV Manual Tuning

Storage To 1

System BG

Current CH 1

Search

Fine-Tune

Frequency 255.25 MHz

Save MENU

_

+

Only can rename ATV programs .

Move the cursor to the program, press teletext

green button to rename the program.

Press to choose the character. Press to

move the cursor .

Press MENU button to exit edit , Press EXIT to

exit the menu.

Note: ATV programs name only can be 5 ,

DTV programs name can be 25

characters long

characters long.

Rename:

< >

Balance

Auto Volume

Sound Mode Standard

SOUND

Surround Sound

P.17

3). ATV Manual tuning :

You can change the sound system to search

the analog TV channels and fine tune the

channels , then storage the channels you

selected.

DTV Manual Tuning

VHF CH 5

_

+

Bad Nomal

Good

Press OK to search

4.TIME MENU

The forth item of the menu is the TIME MENU

You can adjust the clock, power on/off time,

sleep time etc Press to move, press OK to

adjust.

5.OPTION MENU

The fifth item of the MENU is the OPTION

MENU. You can adjust the Menu language,

Audio language,Subtitle language etc.

NOTE:

Within 15 minutes there is no signal, the TV

will auto sleep , if Auto Sleep is set ON. The

clock time can get from the DTV system auto.

Off Time

On Time

Sleep Timer

Auto Sleep

Time Zone

Clock -- -- -- --

TIME

< >

04

Operation

6.LOCK MENU

The sixth item of the menu is the LOCK MENU

You can lock system, set password, block program

and set parental guidance Once you set the lock

system on you can not search the channels or

change any programs.

Set Password

Lock System

LOCK

< >

Block Program

Parental Guidance Off

NOTE:

The default pass word is 0000, If you forget the

password, you can use the super password:9443.

Block program: Press to choose the

program ,press teletext green button to block

the program. If you want unblock the program,

pls enter the main menu , input the password,

then press green button again.Parental

guidance: Press to choose rating.

7.EPG Menu(Electronic Program

Guide).

The EPG menu is used to look at what is being

broadcasted on DTV or Radio channel in the day.

To access the EPG menu, press the EPG

botton,the following menu will be displayed:

28 Apr 04:39

800 SZTVM01 No Information

801 SZTVM02

802 SZTVM03

803 SZTVM04

804 Date

No Information

PROGRAMME GUIDE TIME

ScheduleRecord INFO

Remind

OK

INDEX

1.

Use to choose the programs , Press

INFO key, you can display the highlight program's

information.

INFO

2.

Press the teletext yellow key, It can list

all the reminder schedule, press to choose

the list, press red key to delete the

schedule list.

Schedule

DELETE

Schedule List 04:55 28th Apr Delete

Time Date

Programme Title

Channel Name

NOTE:

Restore factory default will clear all the programs

and password.

Check PVR File System Start

USB Disk

Format

Time Shift Size

Speed

Free Record Limit 6 Hr.

Select Disk C:

In PVR File system menu you can set up USB

disk for PVR.

< >

Restore Factory Default

Automatic power-down(4H)

Home/Shop Mode

DCR

OSD Language English

OPTION

Audio Languages UK

Subtitle Languages UK

Country UK

PVR File System

Automatic Power-down

1.If after 4 hours from switch on and no changes

have been made to the TV, for example no channel

or volume changes,the TV will start the automatic

power down sequence.

And pop-up window will appear on screen.

After 150 seconds the TV will automatically switch

to standby. To override the automatic shutdown

press any button on the remote control.

2. To cancel the automatic power-down

On the Option Menu select Automatic power-

down(4H)

Press OK. A pop-up message will app

ear

“Are you sure you want to enable automatic power-

down?”

Use the right arrow key to select NO

The TV screen returns to the Option Menu and the

Automatic

power-down(4H) option will display.

Automatic power-down(4H) OFF

To return to auto shutdown after 4 hours repeat the

above except

use the left arrow key to select YES

XXX’s to automatic power- down

Please press any Key to Cancel

P.18

3. Record

Press the red key ,It can set the program

to be recorded.

4.

Press the blue key to choose one program

and set up one reminder time, the TV screen will

skip to the choosed program in the reminder time

automatically.

Remind

802 SZTVM03

08 Minute

05 Hour

Apr Month

28 Date

Once Mode

Reminder setting

BACK

OK

_

+

Check PVR File System: check if the PVR File

System set up in the USB device or not.

Format:

Select Disk

USB 0

Disk C:

PVR File System Type Hi Speed FS

PVR File System Size All

SD 104 Mins

HD 29 Mins

File System Size

Select Disk:select which disc to save the

record file.

MENU

OK

Check PVR File System Start

USB Disk

Format

Time Shift Size

Speed

Free Record Limit 6 Hr.

Select Disk C:

PVR File System Type FAT32

PVR File System Size All

SD 104 Mins

HD 29 Mins

OK

File System Size

MENU

1.Prepare to record the program

8.PVR function

PVR function only works in DTV.

From OPTION MENU enter into PVR File

System In “OPTION MENU”, please

choose “check PVR File System”. Click

“OK”, until “checking”change into

“Success”.

Note: please check the term “speed”. If it

is “HD support”, that means the speed of

USB device is available for time shift and

record. If not, please format the device, to

make sure the device available. The default

“Free Record Limit” is 6 hour, if the space

on the disk is big enough. If the space is not

big enough, the record time should be

shorte

r, depends on the room on the

device. During the

“check PVR File

System” checking, please do not take any

The recordings must be done with the TV PVR

system. It can only be played in the same TV,

not in any other kind of device (computer,

DVD, etc.) which is not compatible with .

TS. file format.

Please note that in order to carry out any kind of

recording, the TV will require you to format the

connected USB device to store the recording.

WARNING. WHEN YOU FORMAT, THE

EXTERNAL USB DEVICE YOU WILL LOSE ALL

THE FILES AND INFORMATION YOU HAVE

STORAGE ON THE DEVICE.

The USB file system will li

mit the size of the

storage size.

File system: NTFS up to 2TB

FAT32 with up to 192GB

FAT16 with up to 2GB

From OPTION MENU enter into PVR File

System as below:

P.19

< >

Restore Factory Default

Automatic power-down(4H)

Home/Shop Mode

DCR

OSD Language English

OPTION

Audio Languages UK

Subtitle Languages UK

Country UK

PVR File System

La page charge ...

Haier LET24C400F Manuel utilisateur

Ce manuel convient également à

Haier LET24C400F Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents