Samsung HW-K950 Guide de démarrage rapide

HW-K950

For further information, refer to the Web Manual.

Web manual : www.Samsung.com Support

Product name search HW-K950

User Manual

· 2 · English

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that high voltage is

present inside. It is dangerous to make any

kind of contact with any internal part of this

product.

This symbol indicates that important literature

concerning operation and maintenance has

been included with this product.

Class II product : This symbol indicates that it does not require a safety connection to electrical

earth (ground).

AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC

voltage.

DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC

voltage.

Caution, Consult instructions for use : This symbol instructs the user to consult the user

manual for further safety related information.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the

mains plug shall be readily operable.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on

the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the

power plug must be easily and readily accessible at all times.

· 3 · English

PRECAUTIONS

1. Ensure that the AC power supply in your house complies with the power requirements listed on the

identification sticker located on the back of your product. Install your product horizontally, on a suitable base

(furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not

covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is

designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the

unit if you intend to leave it unused for a long period of time.

2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could

damage the unit.

3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the

unit to malfunction.

4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong

magnetic or electric fields. Disconnect the power cable from the AC supply if the unit malfunctions. Your

product is not intended for industrial use. It is for personal use only. Condensation may occur if your product

has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours

until the unit has reached room temperature before using.

5. The batteries used with this product contain chemicals that are harmful to the environment.

Do not dispose of batteries in the general household trash. Do not dispose of batteries in a fire. Do not short

circuit, disassemble, or overheat the batteries. There is a danger of explosion if the battery is incorrectly

replaced. Replace only with the same or equivalent type.

· 4 · English

FEATURES

Lets you enjoy TV sound after connecting the Soundbar to your TV with or without a cable.

You can enjoy rich and realistic TV sound through the Soundbar connected to your TV with or without a cable.

c Refer to Method 1 on page 8 to see how to connect the Soundbar to your TV using an HDMI Cable.

c Refer to Method 2 on page 9 to see how to connect the Soundbar to your TV using a wireless network.

This product supports Dolby Atmos®.

* What is Dolby Atmos®?

Atmos technology enhances existing 5.1 channel surround sound systems by adding an overhead speaker. This

envelops the listener in 360 degrees of sound, delivering an immersive, high-definition, rich, detailed, and deeper

experience. See page 13 to learn how to connect the system.

· 5 · English

CHECKING THE COMPONENTS

4 AC/DC Adapter3 AC Plug

(Depending on the

country and model)

Top

Soundbar Main Unit

Subwoofer Surround Speaker

Remote Control /

Batteries

HDMI Cable

Left Right

1 Power Cord

2 Power Cord

SOUND

SOURCE

EFFECT

LEVEL

VOL WOOFER

SOUNDBAR

c To distinguish the left surround speaker from the right, check the label on the rear of each speaker.

CONNECTING ELECTRICAL POWER

Use the power components (1, 2, 3, 4) to connect the power supplies in the following order:

Subwoofer  Left and Right Surround Speakers  Soundbar Main Unit

c For more information about the power supply and power consumption, refer to the label attached to the

product. (Label : Bottom of Soundbar main unit)

LINK STANDBY ID SET

POWER

Connecting

electrical power

Connecting

electrical power

1 Power Cord

Rear of

Subwoofer

Bottom of the Left and

Right Surround Speakers

Wi-Fi SETUP SPK ADD

AUX IN

DIGITAL AUDIO IN

(OPTICAL)

HDMI OUT

(TV-ARC)

HDMI IN 1

HDMI IN 2

DC 19V

SERVICE

DC 19V

4 AC/DC Adapter

3 AC Plug

DC 19V

(Power Jack)

Bottom of the

Soundbar Main Unit

2 Power Cord

· 6 · English

CONNECTING SUBWOOFER AND SURROUND SPEAKERS

TO THE SOUNDBAR MAIN UNIT

You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.

TV

Soundbar Main Unit

Subwoofer

Surround

Speaker L

Surround

Speaker R

Recommended Speaker Layout

Subwoofer

Surround Speaker

Soundbar Main Unit

Left Right

90°

110°

90°

110°

S

i

t

Automatic Connection

1. Connect a power supply to the subwoofer and surround sound speakers.

2. Connect a power supply to the Soundbar, and then press the button on the remote control or on the right

side of the Soundbar.

3. The subwoofer and surround sound speakers are automatically connected to the Soundbar.

4. When auto pairing is complete, the blue indicators at the rear of the subwoofer and surround speakers turn on.

c If the red indicator at the rear of the subwoofer or surround speakers is on or the blue indicator flashes

continuously, auto pairing cannot occur. If this happens, connect each of the speakers manually.

(See page 7)

c Important: Before you begin, put the batteries into the remote. See page 18 for instructions.

LINK STANDBY ID SET

POWER

LINK

LINK STANDBY ID SET

LINK

Rear of Subwoofer Rear of Surround Speaker

· 7 · English

Connecting the Subwoofer and Surround Speakers Manually if the

Automatic Connection Fails

c Before You Begin

• Make sure that the Soundbar, the subwoofer, and the surround speakers are plugged in.

• Make sure that the Soundbar is turned on.

1. Press and hold ID SET on the rear of the subwoofer and surround speakers for at least 5 seconds. The red

indicator at the rear of each speaker turns off and the blue indicator blinks.

LINK STANDBY ID SET

POWER

LINK STANDBY ID SET

Rear of Subwoofer Rear of the Left and Right Surround Speakers

2. Turn off the Soundbar.

3. Press and hold the VOL button on the remote control for at least 5 seconds with the Soundbar turned off

(OFF).

EFFECT

LE

VOL

WOOFE

R

SOUND

BA

4. The ID SET message appears on the display of the Soundbar for a short period of time, and then

disappears.

ID SET

Right Side of the Soundbar

5. When the blue indicators on the subwoofer and surround sound speakers blink, turn on the power by

pressing button on the right side of the Soundbar or on the remote control.

6. When the connection is successfully established, the blue indicators on the rear of the subwoofer and

surround speakers turn on without blinking.

c If the connection process fails, the blue indicators will flash continuously. Go to Step 1 and start again.

· 8 · English

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.

c Important: Before you begin, put the batteries into the remote. See page 18 for instructions.

Method 1. Connecting with a Cable

HDMI OUT

(TV-ARC)

DIGITAL AUDIO IN

(OPTICAL)

HDMI OUT

(TV-ARC)

HDMI IN 1

HDMI IN 2

AUX IN

Bottom of

Soundbar

Check the HDMI OUT (TV-ARC)

port on the Soundbar main unit.

HDMI Cable

Check the HDMI IN

(TV-ARC) port on your TV.

1. Connect the HDMI cable as shown in the illustration above.

2. TV ARC appears on the display window of the Soundbar main unit and the TV sound is played.

TV ARC

Right Side of the Soundbar

c If the TV sound is not played, press either on the right side of the Soundbar or the SOURCE button on

the remote control, and then select D.IN on the display window of Soundbar main unit. The D.IN mode

changes to TV ARC and TV sound is output.

c If TV ARC does not appear on the display window of the Soundbar main unit, check that the cable is

connected to the correct port.

c You can conveniently control the volume of the Soundbar and can set Auto Power Link to ON and have the

Soundbar turn on automatically when you turn the TV on.

T

· 9 · English

Method 2. Connecting to a Wireless Network

Installing the Samsung Multiroom App and Connecting Wirelessly

To install Samsung Multiroom app for the first time, follow the

steps shown below.

1. Press and hold the SPK ADD button on the bottom of the

Soundbar for more than 1 second.

• There is a notification sound and the message

“ADD SPEAKER” appears on the Soundbar’s main unit.

Afterwards, the message “WIFI READY” appears when

standby-for-connection mode activates.

2. Connect your smart device (smart phone, tablet, etc.)

to your wireless router.

Samsung

Multiroom

Internet Wireless Router Smart Device

3. Install the Samsung Multiroom app on your smart device (smart phone, tablet, etc.).

4. Launch the Samsung Multiroom app.

Android iOS

Samsung Multiroom app

Samsung

Multiroom

5. Complete the initial settings by following the instructions on the app screen.

Complete the settings

by following the

instructions on the

Samsung Multiroom

app screen.

Start screen Entering the password

for the wireless router

Speaker connection

complete

c You must enter the password of your wireless router to connect your Soundbar to your wireless network

through Samsung Multiroom app.

c If your wireless router has no designated password, the app completes the initial settings without asking you

to enter a password.

Wi-Fi SETUP SPK ADD

AUX IN

DIGITAL AUDIO IN

(OPTICAL)

HDMI OUT

(TV-ARC)

HDMI IN 1

HDMI IN 2

DC 19V

SERVICE

Wi-Fi SETUP SPK ADD

Bottom of the Soundbar

· 10 · English

Adding the Soundbar to an Existing Multiroom Audio System

If the Samsung Multiroom app is already installed for use with another

multiroom audio device, follow these steps to add the Soundbar.

1. Press and hold the SPK ADD button on the bottom of the

Soundbar for more than 1 second.

• There is a notification sound and the message

“ADD SPEAKER” appears on the Soundbar’s main unit.

Afterwards, the message “WIFI READY” appears when

standby-for-connection mode activates.

2. Connect your smart device (smart phone, tablet, etc.)

to your wireless router.

Samsung

Multiroom

Internet Wireless Router Smart Device

3. Launch the Samsung Multiroom app.

4. Touch

to go to the list of all speakers.

5. Select More > Add New Speaker in the app, and then follow the instructions on the app screen.

Complete the settings

by following the

instructions on the

Samsung Multiroom

app screen.

Start screen Selection of network

Speaker addition

complete

c To connect a different network, select No.

You must enter the password of your wireless router to connect your Soundbar to your wireless network

through the Samsung Multiroom app.

If your wireless router does not have a designated password, the app completes the initial settings without

asking you to enter a password.

Wi-Fi SETUP SPK ADD

AUX IN

DIGITAL AUDIO IN

(OPTICAL)

HDMI OUT

(TV-ARC)

HDMI IN 1

HDMI IN 2

DC 19V

SERVICE

Wi-Fi SETUP SPK ADD

Bottom of the Soundbar

Y

· 11 · English

Connecting the Soundbar to your Samsung Smart TV

You can connect your TV to the Soundbar through a wireless network and enjoy the TV sound.

c Important: Make sure that the TV and Soundbar are connected to the same network.

(How to check your Samsung TV network : Home menu  Network  Network Status)

Configuring Settings from your Samsung Smart TV

c To play sound via the Soundbar, make sure that your TV model supports the Multiroom feature

(Samsung Smart TVs released after 2014).

c If the TV is disconnected from the wireless network due to a change to the input source of the Soundbar,

use the TV menu to re-establish the connection.

 For TVs released in 2016

1. Home menu  Settings ( )  Sound  Sound Output  Select [AV] Samsung Soundbar Kxxx (Wi-Fi)

2. TV sound is output.

 For TVs released in 2015

1. Home menu



Sound

 Speaker List 

Select [AV] Samsung Soundbar Kxxx (Wi-Fi)

2. TV sound is output.

 For TVs released in 2014

1. Home menu



Sound

 Speaker Settings 

Select

Multiroom Link - Settings  Soundbar+Surround

2. From the Soundbar position, select "K950" and select "OK".

3. Home menu



Sound

 Speaker Settings 

Select

TV Sound Output  Multiroom Link

TV Speaker

•

TV Installation Type

Stand

TV SoundConnect

• Samsung Audio Device List

• Add New Device On

Multiroom Link

• Settings

Soundbar+Surround

Bluetooth headphone

• Bluetooth headphone List

Speaker Settings

TV Sound Output Multiroom Link

OK

󰟵

󰟳

Multiroom Link

OK Volume Level Speaker Test

Soundbar

[AV] Samsung Soundbar K950

Soundbar+Surround

c

[AV] Samsung Soundbar K950

Don't Use

󰟴

Edit Na

4. TV sound is output.

· 12 · English

CONNECTION VIA BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!

c It is not possible to connect multiple Bluetooth devices at the same time.

Connect

Bluetooth device

1. Press the

button on the right side of the Soundbar or the SOURCE button on the remote control to

select BT.

2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's

user manual.)

3. Select "[AV] Samsung Soundbar Kxxx" from the list.

• When the connection is established between the Soundbar and Bluetooth device, the front display

window of the Soundbar displays [Bluetooth device name] → BT.

4. Play music on the connected device.

[If failed to connect to the Bluetooth device / If device searching is needed again]

• If "[AV] Samsung Soundbar Kxxx" is found in the search results on the Bluetooth device, delete it.

• Press and hold either the

button on the right side of the Soundbar or the SOURCE button on the remote

control to switch to BT PAIRING mode, then select "[AV] Samsung Soundbar Kxxx" from the displayed list

of available devices on the Bluetooth device. (Refer to steps 2 and 3 above).

c If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

c In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar

and the Bluetooth device exceeds 10 meters.

c The Soundbar automatically turns off after 5 minutes in the Ready state.

c The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances:

If there is a strong electrical field around the Soundbar.

If several Bluetooth devices are simultaneously paired with the Soundbar.

If the Bluetooth device is turned off, not in place, or malfunctions.

c Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be

kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

Disconnecting the Soundbar from the Bluetooth device

Press the SOURCE button on the remote control or the button on the product's

rig

ht side to switch from

BT to another mode or turn off the Soundbar.

• The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before

terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)

· 13 · English

CONNECTING DEVICES IN ORDER TO USE DOLBY ATMOS®

This product supports Dolby Atmos®.

c Important: Dolby Atmos® works only in HDMI mode. It is not compatible with other input sources.

HDMI OUT

(TV-ARC)

HDMI IN 1

HDMI IN 2

HDMI Cable

External

Device

Or

Soundbar

HDMI IN

HDMI OUT

Bottom of the

Soundbar

1. Connect an HDMI cable from the HDMI IN 1 or HDMI IN 2 jack on the back of the product to the HDMI OUT

jack on your digital device.

Use the HDMI cable to connect the HDMI IN port on the TV to the HDMI OUT

(TV-ARC) port on the bottom of the Soundbar.

2. Press the

button on the right side of the Soundbar or the SOURCE button on the remote control to

select HDMI1 or HDMI2.

3. The selected HDMI mode is displayed on the Soundbar display panel and sound plays.

c When Dolby Atmos® operated, the Blue LED on the right edge of the Soundbar will turn on and glow.

4. Configuring Dolby Atmos® on your BD player, or other device.

• Check the audio output options using the settings menu on your BD player, or other device.

• Make sure that "No Encoding" is selected for bitstream in the audio output options.

e.g., On a Samsung Player: Home menu  Settings  Sound 

Digital Output: Select Bitstream (Unprocessed).

Settings

Sound

Speaker Settings

Digital Output

PCM Downsampling

Dynamic Range Control

Downmixing Mode

DTS Neo:6 Mode Off

Audio Sync 0 ms

PCM

Bitstream (Unprocessed)

Bitstream (Re-encoded DTS)

Bitstream (Re-encoded Dolby D)

• If the Audio Output options include Secondary Audio, make sure it is set to Off.

c Dolby Atmos® works only on 5.1.4 channels.

c Make sure that the content supports Dolby Atmos®.

· 14 · English

CONNECTING AN EXTERNAL DEVICE

HDMI OUT

(TV-ARC)

HDMI IN 1

HDMI IN 2

HDMI Cable

External

Device

Or

Soundbar

HDMI IN

HDMI OUT

Bottom of the

Soundbar

1. Connect an HDMI cable from the HDMI IN 1 or HDMI IN 2 jack on the back of the product to the HDMI OUT

jack on your digital device.

Use the HDMI cable to connect the HDMI IN port on the TV to the HDMI OUT

(TV-ARC) port on the bottom of the Soundbar.

2. Press the

button on the right side of the Soundbar or the SOURCE button on the remote control to

select HDMI1 or HDMI2.

3. The selected HDMI mode is displayed on the Soundbar display panel and sound plays.

SOFTWARE UPDATE

Samsung may offer updates for the Soundbar's system firmware in the future.

Auto Update

The automatic update function is enabled on the Soundbar by default. Automatic firmware updates are searched

for and performed if the Soundbar is connected to the Internet, irrespective of whether it is turned on or off.

c To use the Auto Update function, the Soundbar must be connected to the Internet.

The Wi-Fi connection to the Soundbar will be terminated if its power cord is disconnected or the power is cut

off. If the power is cut off, turn on the Soundbar and reconnect it.

Updating with USB

Wi-Fi SETUP SPK ADD

AUX IN

DIGITAL AUDIO IN

(OPTICAL)

HDMI OUT

(TV-ARC)

HDMI IN 1

HDMI IN 2

DC 19V

SERVICE

Micro USB to USB adapter Cable (not supplied)

If an update is offered, you can update the firmware by connecting a USB device with the firmware update

stored on it to the USB port on your Soundbar.

For more information about how to download update files, go to the Samsung Electronics website at

(samsung.com/sec)  search for the model name  download the firmware from the customer support menu

option. The option name can vary.

c If the input source has been changed after an update or a reconnection of the power cable, change the input

source to TV, or the desired source.

· 15 · English

INSTALLING THE WALL

MOUNT

You can use the wall mount bracket to mount this unit

on a wall.

I nstallation Precautions

• Install on a vertical wall only.

• Do not install the Soundbar system in a location

with high temperature and/or humidity. Install the

system on a stable wall that can bear the weight of

the Soundbar main unit.

• Check the strength of the wall. To install the

Soundbar system on a wall that may not bear the

Soundbar main unit weight, reinforce the wall

before installation. If this is not possible, install the

system on another wall, one stable enough to bear

the weight of the Soundbar main unit.

• Purchase and use the fixing screws or anchors

appropriate for the kind of wall you have (plaster

board, iron board, wood, etc.). If possible, fix the

support screws into wall studs.

• Purchase wall mounting screws according to the

type and thickness of the wall you will mount the

Soundbar on.

- Diameter: M5

- Length: 35 mm or longer recommended.

• Connect cables from the unit to external devices

before you install it on the wall.

• Make sure the unit is turned off and unplugged

before you install it. Otherwise, it may cause an

electric shock.

Wallmount Components

Bracket-Wall Mount (2 EA)

Holder-Screw (2 EA) Screw (2EA)

C TYPE : 700mm

CENTER LINE

C C

Wall Mount Guide

1. Place the Wall Mount Guide against the wall

surface.

●

The Wall Mount Guide must be level.

●

If your TV is mounted on the wall, install the

Soundbar at least 5 cm below the TV.

5 cm or more

· 16 · English

2. Align the Paper Template's Centre Line with the

centre of your TV (if you are mounting the

Soundbar below your TV), and then fix the Wall

Mount Guide to the wall using tape.

c If you are not mounting below a TV, place the

Centre Line in the centre of the installation area.

Centre Line

C TYPE : 700mm

CENTER LINE

C C

3. Push a pen tip or sharpened pencil tip through the

centre of the C-TYPE images on each end of the

Guide to mark the holes for the supporting

screws, and then remove the Wall Mount Guide.

4. Using an appropriately sized drill bit, drill a hole in

the wall at each marking.

c If the markings do not correspond to the

positions of studs, make sure you insert

appropriate anchors or mollies into the holes

before you insert the support screws. If you use

anchors or mollies, make sure the holes you drill

are large enough for the anchors or mollies you

use.

C

ENTER LINE

C

C TYPE : 700mm

CENTER LINE

C

5. Push a screw (not supplied) through each

Holder-Screw, and then screw each screw

firmly into a support screw hole.

6. Install 2 Bracket-Wall Mounts in the right

orientation on the bottom of the Soundbar, using

2 Screws (M4 x L12)

●

When assembling, make sure the hanger parts

of the Bracket-Wall Mounts are located

behind the rear of the Soundbar. See the

illustration below.

Rear of the Soundbar

Right end of the Soundbar

· 17 · English

7. Install the Soundbar with the attached Bracket-

Wall Mounts by hanging the Bracket-Wall

Mounts on the Holder-Screws on the wall.

8. Slide the Soundbar down as shown below so that

the Bracket-Wall Mounts rest securely on the

Holder-Screws.

c Slide the Bracket-Wall Mounts down from the

bottom to install it onto the Holder-Screws.

INSTALLING THE SURROUND

SPEAKERS ON A WALL

You can purchase wall mounts separately to install

the surround speakers on a wall.

Considerations for Purchasing

• Endurable load : Above 8.0 Kg

• Hole size : 1/4 - 20 threaded insert

c Since wall-mount installation is optional, you

must purchase the corresponding accessories

separately.

c Please have a qualified installer install the

surround speaker Wall Mount Brackets.

c Ask a professional installation company to mount

your product on the wall.

c Check the strength of the wall before you install

the Wall Mount Brackets. If the strength is

insufficient, make sure to reinforce the wall before

installing the Wall Mount Brackets and the

speakers on the wall.

c For more information, please refer to the Wall

Mount's manual.

c Samsung Electronics is not liable for any damage

to the product due to the product being installed

inappropriately.

c Take care not to install the speakers sideways or

upside down.

· 18 · English

REMOTE CONTROL BUTTONS & FEATURES

SOUND

SOURCE

EFFECT

LEVEL

VOL WOOFER

SOUNDBAR

󰟳

󰟴

󰟵

󰟶

󰟷

󰟹

󰟸

󰟺

󰟼

󰟻

Inserting Batteries before using the Remote

Control (AA batteries X 2)

Slide the battery cover in the direction of the arrow until it is

completely removed.

Insert 2 AA batteries (1.5V) in the correct +/- polarity. Slide the

battery cover back into position.

Controlling the Volume of Soundbar by using

Your TV Remote Control

1. Press and hold the SOUND button for more than

5 seconds while the Soundbar is turned on.

2. "ON - TV REMOTE" appears on the Soundbar's display.

3. In the TV's menu, set the TV speaker to external speaker.

c Not available in TV ARC, BT, HDMI1 and HDMI2 modes.

(Available only in D.IN (optical) and AUX modes)

c On the TV remote control, only the volume and mute buttons

are available. Other buttons are disabled.

c TV menus differ by manufacturer and model. Refer to the TV's

user manual for further information.

c Manufacturers supporting this function:

●

VIZIO, LG, Sony, Sharp, PHILIPS, PANASONIC, TOSHIBA,

GRUNDIG, Hisense, RCA

●

This function may not be compatible with your TV's remote

depending on the remote control's manufacturer.

c To turn off this function, press the SOUND button for

5 seconds. "OFF - TV REMOTE" appears on the Soundbar's

display.

󰟳

Power

Turns the Soundbar on and off.

󰟴

SOUND

Turns Surround Sound on and off. The Surround Sound function adds depth and a

sense of space to sound.

Each time you press this button, ON and OFF alternate.

• ON: Play sound over all the speakers.

c You can also hear 5.1.4 channel sound for music sources that are not Dolby

Atmos®.

• OFF: Play sound through the original source channel.

· 19 · English

󰟵

EFFECT

You can select from 6 sound modes: STANDARD, MUSIC, CLEAR VOICE, SPORTS,

MOVIE, and NIGHT.

c NIGHT mode

When changing a channel or music source, the volume difference between

different music input sources is automatically adjusted to be suitable for listening.

c DRC (Dynamic Range Control)

Lets you apply dynamic range control to Dolby Digital tracks. Press and hold the

EFFECT button for about 5 seconds in standby mode to toggle the DRC (Dynamic

Range Control) function ON - DRC and OFF - DRC.

󰟶

Sound control

You can select from TREBLE, BASS, or AUDIO SYNC.

• To control the volume of the treble or bass sound, select TREBLE or BASS in

Sound Settings, and then adjust the volume between -3~+3 by using the

Up/Down buttons.

• If the video and audio between the TV and your Soundbar are not synchronized,

select AUDIO SYNC in Sound Settings, and then set audio delay between 0~300

milliseconds by using the Up/Down buttons.

c Audio Sync is only supported in some functions.

󰟷

SOURCE

Press to select a source connected to the Soundbar.

c BT PAIRING mode

To turn on BT PAIRING mode in Bluetooth function, press and hold the SOURCE

button for more than 5 seconds.

󰟸

Play/Pause

(BT/WIFI)

Press the

&

button to pause a music temporarily.

Press the

&

button again to play the selected music.

󰟹

SOUND

৻ࠗੑ۱

Up/Down/

Left/Right

SOUND

৻ࠗੑ۱

Press the indicated areas to select Up/Down/Left/Right.

Press Up/Down/Left/Right on the button to select or set functions.

c Music Skip

Press the Right button to select the next music; press the Left button to select the

previous music.

c Anynet+ / Auto Power Link

You can turn the Anynet+ and Auto Power Link on or off.

The Anynet+ and Auto Power Link are controlled by the Right and Left buttons

respectively.

• Anynet+: If connected through an HDMI cable, you can control your Soundbar

with a Samsung TV remote control. Press and hold the Right button for

5 seconds to toggle Anynet+ ON and OFF.

• Auto Power Link: If connected through a digital optical cable, the Soundbar can

automatically turn on when you turn on your TV. Press and hold the Left button for

5 seconds to toggle Auto Power Link ON and OFF.

· 20 · English

󰟺

LEVEL

FL FR

FTRFTL

STL STR

SL

SR

C

Soundbar Main Unit

Surround

Speaker L

Surround

Speaker R

The ATMOS Soundbar has 5.1.4 channel sound. Use this button to adjust the volume

of each of the speakers. Press this button, use the Left/Right buttons to select a

speaker, and then use the Up/Down buttons to increase or decrease the level

(volume).

Speaker

Displayed on OLED when

adjusting the level

Soundbar Main Unit

Front Left FL

Front Top Left FTL

Centre C

Front Right FR

Front Top Right FTR

Surround Speaker L

Surround Left SL

Surround Top Left STL

Surround Speaker R

Surround Right SR

Surround Top Right STR

c See the description under item 9 for instructions on how to adjust the subwoofer

level (volume).

󰟻

WOOFER

EFFECT

LE

VE

VOL

WOOFE

R

SOUN

DB

OOFE

R

EFFECT

LE

VE

VOL

WOOF

ER

SOUN

DB

Push the button up or down to adjust the volume of the subwoofer to -12 or -6 to +6.

Pressing the button reverts the subwoofer volume to level 0.

󰟼

VOL

EFFECT

VOL

WOOFE

R

SOUN

DB

VOL

EFFECT

VOL

WOOF

ER

SOUN

DB

Push the button up or down to adjust the volume.

c Mute

Press the VOL button to mute the sound. Press it again to unmute the sound.

La page charge ...

Samsung HW-K950 Guide de démarrage rapide

Samsung HW-K950 Guide de démarrage rapide

dans d''autres langues

Documents connexes