SocketModem
®
Cell
MTSMC-MNA1 Device Guide
SOCKETMODEM® CELL DEVICE GUIDE
2 SocketModem
®
Cell MTSMC-MNA1 Device Guide
SocketModem
®
Cell Device Guide
Models: MTSMC-MNA1, MTSMC-MNA1-U
Part Number: S000708, Version 1.2
Copyright
This publication may not be reproduced, in whole or in part, without the specific and express prior written permission signed by an executive officer of
Multi-Tech Systems, Inc. All rights reserved. Copyright © 2019 by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties, whether express, implied or by estoppels, with respect to the content, information,
material and recommendations herein and specifically disclaims any implied warranties of merchantability, fitness for any particular purpose and non-
infringement.
Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of
Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
Trademarks and Registered Trademarks
Multi-Tech, and the Multi-Tech logo, and SocketModem are trademarks and registered trademarks of Multi-Tech Systems, Inc. All other products and
technologies are the trademarks or registered trademarks of their respective holders.
Legal Notices
The MultiTech products are not designed, manufactured or intended for use, and should not be used, or sold or re-sold for use, in connection with
applications requiring fail-safe performance or in applications where the failure of the products would reasonably be expected to result in personal injury or
death, significant property damage, or serious physical or environmental damage. Examples of such use include life support machines or other life
preserving medical devices or systems, air traffic control or aircraft navigation or communications systems, control equipment for nuclear facilities, or
missile, nuclear, biological or chemical weapons or other military applications (“Restricted Applications”). Use of the products in such Restricted
Applications is at the user’s sole risk and liability.
MULTITECH DOES NOT WARRANT THAT THE TRANSMISSION OF DATA BY A PRODUCT OVER A CELLULAR COMMUNICATIONS NETWORK WILL BE
UNINTERRUPTED, TIMELY, SECURE OR ERROR FREE, NOR DOES MULTITECH WARRANT ANY CONNECTION OR ACCESSIBILITY TO ANY CELLULAR
COMMUNICATIONS NETWORK. MULTITECH WILL HAVE NO LIABILITY FOR ANY LOSSES, DAMAGES, OBLIGATIONS, PENALTIES, DEFICIENCIES, LIABILITIES,
COSTS OR EXPENSES (INCLUDING WITHOUT LIMITATION REASONABLE ATTORNEYS FEES) RELATED TO TEMPORARY INABILITY TO ACCESS A CELLULAR
COMMUNICATIONS NETWORK USING THE PRODUCTS.
The MultiTech products and the final application of the MultiTech products should be thoroughly tested to ensure the functionality of the MultiTech
products as used in the final application. The designer, manufacturer and reseller has the sole responsibility of ensuring that any end user product into
which the MultiTech product is integrated operates as intended and meets its requirements or the requirements of its direct or indirect customers.
MultiTech has no responsibility whatsoever for the integration, configuration, testing, validation, verification, installation, upgrade, support or maintenance
of such end user product, or for any liabilities, damages, costs or expenses associated therewith, except to the extent agreed upon in a signed written
document. To the extent MultiTech provides any comments or suggested changes related to the application of its products, such comments or suggested
changes is performed only as a courtesy and without any representation or warranty whatsoever.
Contacting MultiTech
Knowledge Base
The Knowledge Base provides immediate access to support information and resolutions for all MultiTech products. Visit http://www.multitech.com/kb.go.
Support Portal
To create an account and submit a support case directly to our technical support team, visit: https://support.multitech.com.
Support
Business Hours: M-F, 8am to 5pm CT
Country By Email By Phone
Warranty
To read the warranty statement for your product, visit https://www.multitech.com/legal/warranty. For other warranty options, visit
www.multitech.com/es.go.
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive, Mounds View, MN 55112
Phone: (800) 328-9717 or (763) 785-3500
Fax (763) 785-9874
CONTENTS
SocketModem
®
Cell MTSMC-MNA1 Device Guide 3
Contents
Chapter 1 – Product Overview ................................................................................................................................. 6
Product Overview.......................................................................................................................................................... 6
Documentation ............................................................................................................................................................. 6
Product Build Options................................................................................................................................................... 7
Chapter 2 – Mechanical Drawings............................................................................................................................ 8
MTSMC-Mxx1................................................................................................................................................................ 8
MTSMC-Mxx1-U............................................................................................................................................................ 9
Chapter 3 – Specifications ...................................................................................................................................... 10
MTSMC-MNA1 and MTSMC-MNA1-U Specifications ................................................................................................. 10
Powering Down Your Device ...................................................................................................................................... 11
UART DC Electrical Characteristics.............................................................................................................................. 11
Absolute Maximum Rating........................................................................................................................................ 11
Electrical Characteristics Other Pins ........................................................................................................................... 12
Pinout Specifications................................................................................................................................................... 12
Pin Availability by Build............................................................................................................................................... 13
Power Measurements................................................................................................................................................. 14
MTSMC-MNA1 Power Draw ..................................................................................................................................... 14
MTSMC-MNA1-U Power Draw.................................................................................................................................. 15
Mounting Hardware.................................................................................................................................................... 15
Recommended Parts................................................................................................................................................. 15
Chapter 4 – Antennas ............................................................................................................................................ 16
Antenna System Cellular Devices................................................................................................................................ 16
Requirements for Cellular Antennas with regard to FCC/IC Compliance................................................................. 16
Antenna....................................................................................................................................................................... 16
Antenna Specifications ............................................................................................................................................. 16
OEM Integration ......................................................................................................................................................... 17
FCC & IC Information to Consumers ......................................................................................................................... 17
FCC Grant Notes........................................................................................................................................................ 17
Host Labeling............................................................................................................................................................. 17
Chapter 5 – SIM Card and Account Activation ........................................................................................................ 18
Chapter 6 – Dual Carrier Firmware for Cellular Radio............................................................................................. 19
Chapter 7 – Carrier Specific Notice......................................................................................................................... 20
Firmware Over the Air (FOTA) Script .......................................................................................................................... 20
Verizon Requirement: Firmware Over The Air (FOTA) - Scripting ............................................................................ 20
Cellular Module FOTA Script Example Process ......................................................................................................... 20
FOTA Client Example Session Log ............................................................................................................................. 22
CONTENTS
4 SocketModem
®
Cell MTSMC-MNA1 Device Guide
Chapter 8 – Safety Information .............................................................................................................................. 24
Handling Precautions .................................................................................................................................................. 24
Radio Frequency (RF) Safety ....................................................................................................................................... 24
Sécurité relative aux appareils à radiofré quence (RF).............................................................................................. 24
Interference with Pacemakers and Other Medical Devices ...................................................................................... 25
Potential interference ............................................................................................................................................... 25
Precautions for pacemaker wearers ........................................................................................................................ 25
Vehicle Safety.............................................................................................................................................................. 25
Device Maintenance ................................................................................................................................................... 25
User Responsibility...................................................................................................................................................... 26
Chapter 9 – Regulatory Information....................................................................................................................... 27
47 CFR Part 15 Regulation Class B Devices ................................................................................................................. 27
FCC Grant Information ................................................................................................................................................ 28
Chapter 10 – Environmental Notices ...................................................................................................................... 29
Waste Electrical and Electronic Equipment Statement .............................................................................................. 29
WEEE Directive.......................................................................................................................................................... 29
Instructions for Disposal of WEEE by Users in the European Union ........................................................................ 29
REACH Statement ....................................................................................................................................................... 29
Registration of Substances........................................................................................................................................ 29
Restriction of the Use of Hazardous Substances (RoHS) ............................................................................................ 30
Chapter 11 – Labels................................................................................................................................................ 31
Approvals and Certifications ....................................................................................................................................... 31
Example Labels............................................................................................................................................................ 31
Chapter 12 – Using Connection Manager ............................................................................................................... 33
Installing Connection Manager ................................................................................................................................... 33
Setting Up a Serial Device in Windows Device Manager............................................................................................ 34
Connecting a Device.................................................................................................................................................... 36
Uninstalling Connection Manager............................................................................................................................... 37
Connection Manager User Interface........................................................................................................................... 37
Main tab.................................................................................................................................................................... 38
Settings tab ............................................................................................................................................................... 39
Connection tab.......................................................................................................................................................... 39
Details tab ................................................................................................................................................................. 39
Terminal tab.............................................................................................................................................................. 39
Charts tab.................................................................................................................................................................. 39
Troubleshooting.......................................................................................................................................................... 39
Serial COM port is not available in the Serial Modem Settings................................................................................ 39
Device is not detected ("No Device") ....................................................................................................................... 39
MultiConnect Cell USB Modem is not detected ....................................................................................................... 40
Connection Manager is not working, and a device connected to the computer is not detected............................ 40
Connection Manager displays "Device Error" status for a serial device .................................................................. 40
PRODUCT OVERVIEW
6 SocketModem
®
Cell MTSMC-MNA1 Device Guide
Chapter 1 – Product Overview
Product Overview
SocketModem Cell models are complete, ready-to-integrate communications devices that offer standards-based
LTE performance. Designed for IoT applications, these models offer enhanced coverage and optimized power
consumption. These quick-to-market communications devices allow developers to add wireless communication to
products with a minimum of development time and expense. SocketModem Cell models are based on industry-
standard open interfaces and use MultiTech ’s Universal Socket design.
Documentation
The following documentation is available at multitech.com/support.
Document Description Part Number
SocketModem Cell Cat-M1
MTSMC-MNA1 Device Guide
This document. Provides overview, safety and regulatory
information, design considerations, schematics, and device
information.
S000669
Universal Developer Kit 2.0
Developer Guide
Information for developing with the MTUDK2 Developer Kit.
Includes an overview, design considerations, schematics, and
installation and operation information.
S000610
USB Driver Installation Guide
for LTE Devices
Instructions for installing USB drivers on Linux and Windows
Systems.
S000616
Telit ME910C1 AT Commands
Reference Guide
Lists AT Commands and parameters used to configure your
device.
80529ST10815A
PRODUCT OVERVIEW
SocketModem
®
Cell MTSMC-MNA1 Device Guide 7
Product Build Options
Product Description Carrier/Region
MTSMC-MNA1 Embedded LTE Cat M1 serial modem with GNSS US/AT&T/Verizon
MTSMC-MNA1-U Embedded LTE Cat M1 USB modem with GNSS US/AT&T/Verizon
Developer Kit
MTUDK2-ST-Cell Developer Kit for SocketModem and Dragonfly cellular
devices.
All
Note:
These units ship without network activation.
To connect them to the cellular network, you need a cellular account. For more information, refer to
SIM Card and Account Activation.
The complete product code may end in .Rx. For example, MTSMC-MNA1.Rx, where R is revision and
x is the revision number.
All builds can be ordered individually or in 50-packs. Add SP to the model number for a single pack.
MECHANICAL DRAWINGS
8 SocketModem
®
Cell MTSMC-MNA1 Device Guide
Chapter 2 – Mechanical Drawings
MTSMC-Mxx1
MECHANICAL DRAWINGS
SocketModem
®
Cell MTSMC-MNA1 Device Guide 9
MTSMC-Mxx1-U
SPECIFICATIONS
10 SocketModem
®
Cell MTSMC-MNA1 Device Guide
Chapter 3 – Specifications
MTSMC-MNA1 and MTSMC-MNA1-U Specifications
Category Description
General
Standards LTE UE Category M1, 3GPP release 13 compliant
USB Interface is CDC-ACM compliant
TCP/IP Functions SSL, IPv4/IPv6 stack with TCP and UDP protocol
Frequency Bands 4G: 1900 (B2) / 700 (B12) / 700 (B13) / AWS 1700 (B4)
Speed
Data Speed LTE Cat M1: Up to 375 Kbps uplink / Up to 300 Kbps downlink
Interface
USB Interface USB 2.0 high speed 480 Mbps
Serial Modem Interface Up to 921.6 Kbps
Physical Description
Weight 0.4 oz. (10 g)
Dimensions Refer to Mechanical Drawing for Dimensions.
Connectors
Antenna Connector 1 surface mount UFL connector for cellular and 1 for GNSS
SIM 1.8V and 3V SIM holder for mini-SIM card
Environment
Operating Temperature -40° C to +85 ° C
Humidity 20%-90% RH, non-condensing
Power Requirements
Input Voltage 3.3-5 VDC
Certifications and Compliance
EMC and Radio
Compliance
FCC Part 15 Class B
FCC Part 24E
FCC Part 27
Safety Compliance UL 60950-1 2nd ED
Carrier AT&T/PTCRB/Verizon
SPECIFICATIONS
SocketModem
®
Cell MTSMC-MNA1 Device Guide 11
Powering Down Your Device
CAUTION: Failing to properly power down the device before removing power may corrupt your device's file
system.
To properly power down your device, use the following sequence :
1. Issue the AT#SHDN command.
2. Wait 30 seconds.
3. Power off or disconnect power.
Note: If you send AT#SHDN and do not remove power, the radio restarts after 60 seconds.
UART DC Electrical Characteristics
Units: Volts
Applies to the following pins:
Pin Signal Name Pin Signal Name
J33 -RTS J37 -DSR
J34 -RXD J38 -CTS
J35 -TXD J39 -DCD
J36 -RI J40 -DTR
Parameter Minimum Maximum
3.3 Volt Powered
Input Low Level 0 0.55
Input High Level 1.5 3.3
Output Low Level 0 0.55
Output High Level 2.35 3.3
5 Volt Powered
Input Low Level 0 0.8
Input High Level 2.3 5
Output Low Level 0 0.55
Output High Level 3.7 5
Absolute Maximum Rating
All models can run with an input voltage of either 3.3V or 5V. The maximum voltage on any signal pin equals the
input voltage.
SPECIFICATIONS
12 SocketModem
®
Cell MTSMC-MNA1 Device Guide
Electrical Characteristics Other Pins
Pin Signal
Name
VIL Min VIL Max VIH Min VIH Max VOL Min VOL Max VOH Min VOH Max
J24 -RESET -- 0.8 2.0 -- -- -- -- --
J25 USB VBUS -0.3 0.8 2.0 8.7 -- -- -- --
J26 GND -- -- -- -- -- -- -- --
J27 USB DP -- 0.8 2 -- -- 0.3 2.8 --
J28 USB DN -- 0.8 2 -- -- 0.3 2.8 --
J41 GND -- -- -- -- -- -- -- --
J58 -LED LINK -- -- -- -- 0 0.45 2.85 3.3
J61 VCC -- -- -- -- -- -- -- --
J63 GND -- -- -- -- -- -- -- --
Pinout Specifications
Pin Signal Name Logic Level Voltage
1
In/Out Description
J24 –RESET 3.3 – 5.0 I Device reset (active low)
J25 USB VBUS 3.3 – 5.0 I USB power supply input
J26 GND GND GND Ground
J27 USB DP 3.3 I/O USB data
J28 USB DN 3.3 I/O USB data
J33 –RTS 5.0 I Request to send (active low)
J34 –RXD 5.0 O Received data (active low)
J35 –TXD 5.0 I Transmitted data (active low)
J36 –RI 5.0 O Ring indicator (active low)
J37 –DSR 5.0 O Data set ready (active low)
J38 –CTS 5.0 O Clear to send (active low)
J39 –DCD 5.0 O Data carrier detect (active low)
J40 –DTR 5.0 I Data terminal ready (active low)
J41 GND GND GND Ground
J58 –LED LINK 3.3 O Link status (active low, can sink up to
150mA)
J61 VCC 5.0 PWR DC input power
J63 GND GND GND Ground
1
A hyphen (-) indicates a range of acceptable logic levels.
SPECIFICATIONS
SocketModem
®
Cell MTSMC-MNA1 Device Guide 13
Pin Availability by Build
Pin Signal Name Serial Only USB Only
J24 –RESET X X
J25 USB VBUS X
J26 GND X X
J27 USB DP X
J28 USB DN X
J33 –RTS X
J34 –RXD X
J35 –TXD X
J36 –RI X
J37 –DSR X
J38 –CTS X
J39 –DCD X
J40 –DTR X
J41 GND X X
J58 –LED LINK X
J61 VCC X X
J63 GND X X
SPECIFICATIONS
14 SocketModem
®
Cell MTSMC-MNA1 Device Guide
Power Measurements
Multi-Tech Systems, Inc. recommends that you incorporate a 10% buffer into your power source when determining
product load.
Note:
The following notes apply to the following tables.
Tx Pulse: The average peak current during an LTE connection.
Maximum Power: The continuous current during maximum data rate with the radio transmitter at
maximum power.
Inrush Charge: The input current during power up, or a reset.
MTSMC-MNA1 Power Draw
Radio
Protocol
Sleep Mode
Current (if
applicable)
Cellular
Connection
Idle No Data
Average
Measured
Current
(Amps) at
Maximum
Power
TX Pulse (Avg)
Amplitude
Current
(Amps) Peak
Current for LTE
Total Inrush
Charge
Measured in
Millicoulombs
Total Inrush
Charge
Duration
during Power
Up (Inrush
duration)
3.3 Volts
LTE 12 mA 21 mA 181 mA 476 mA 1.36 mC 1.53 mS
5.0 Volts
LTE 9 mA 14 mA 122 mA 268 mA 1.44 mC 1.38 mS
SPECIFICATIONS
SocketModem
®
Cell MTSMC-MNA1 Device Guide 15
MTSMC-MNA1-U Power Draw
Radio
Protocol
Sleep Mode
Current (if
applicable)
Cellular
Connection
Idle No Data
Average
Measured
Current
(Amps) at
Maximum
Power
TX Pulse (Avg)
Amplitude
Current
(Amps) Peak
Current for LTE
Total Inrush
Charge
Measured in
Millicoulombs
Total Inrush
Charge
Duration
during Power
Up (Inrush
duration)
3.3 Volts
LTE NA 45 mA 230 mA 556 mA 1.70 mC 1.78 mS
5 Volts
LTE NA 28 mA 151 mA 328 mA 1.45 mC 1.02 mS
Mounting Hardware
The board has three mounting holes at corners. Use #4 or M3 hardware for mounting the SocketModem to the
board. Refer to the Mechanical Drawings for more information.
Recommended Parts
Manufacturer Part Part Number
PEM (Penn Engineering &
Manufacturing)
Surface Mount Standoff SMTSO-M3-4ET
RAF Electronic Hardware 3/16” Hex Female Standoff 2051T-440-S-12-Zinc
RAF Electronic Hardware 4.5mm Hex Female Standoff 1251-3005-S-12-Zinc
ANTENNAS
16 SocketModem
®
Cell MTSMC-MNA1 Device Guide
Chapter 4 – Antennas
Antenna System Cellular Devices
The cellular/wireless performance depends on the implementation and antenna design. The integration of the
antenna system into the product is a critical part of the design process; therefore, it is essential to consider it early
so the performance is not compromised. Devices were approved with the following antenna(s) and for alternate
antennas meeting the given specifications.
The antenna system is defined as the UFL connection point from the device to the specified cable specifications
and specified antenna specifications.
Requirements for Cellular Antennas with regard to FCC/IC Compliance
This device has been designed to operate with the antennas listed below and having a maximum antenna gain of
6.18 dBi for the 700 MHz band, 6.00 dBi for 1700 MHz band, and 9.01 dBi for the 1900 MHz frequency band.
Antennas not included in this list or that have a gain greater than specified are strictly prohibited for use with this
device. The required antenna impedance is 50 ohms.
Antenna
Devices were approved with the following antenna or for alternate antennas meeting the given specifications:
Manufacturer: Wieson
Description: LTE Antenna with SMA-Male Connector
Model Number GY115IE002-001
MultiTech ordering information:
Model Quantity
ANLTE4-1HRA 1
ANLTE4-2HRA 2
ANLTE4-10HRA 10
ANLTE4-50HRA 50
Antenna Specifications
Category Description
Frequency Range 0.698 - 0.96 GHz
1.710 - 2.170 GHz
2.30 - 2.69 GHz
VSWR 3:1 maximum
Gain 2.06 dBi
Impedance 50Ω nominal
ANTENNAS
SocketModem
®
Cell MTSMC-MNA1 Device Guide 17
Category Description
Radiation Omni-directional
Polarization Linear, vertical
OEM Integration
FCC & IC Information to Consumers
The user manual for the consumer must contain the statements required by the following FCC and IC regulations:
47 C.F.R. 15.19(a)(3), 15.21, 15.105 and RSS-Gen Issue 3, Dec 2010; 7.1.2 and 7.1.3
FCC Grant Notes
The OEM should follow all the grant notes listed below. Otherwise, further testing and device approvals may be
necessary.
FCC Definitions
Portable: ( §2.1093) — A portable device is defined as a transmitting device designed to be used so that the
radiating structure(s) of the device is/are within 20 centimeters of the body of the user.
Mobile: (§ 2.1091) — A mobile device is defined as a transmitting device designed to be used in other than fixed
locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally
maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons.
Actual content pending Grant: This device is a mobile device with respect to RF exposure compliance. The
antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons, and must not be collocated or operate in conjunction with any other antenna or transmitter except in
accordance with FCC multi-transmitter product guidelines. Installers and end-users must be provided with specific
information required to satisfy RF exposure compliance for installations and final host devices. (See note under
Grant Limitations.) Compliance of this device in all final host configurations is the responsibility of the Grantee.
Note: Host design configurations constituting a device for portable use (<20 cm from human body) require
separate FCC/IC approval.
Note: Only use antennas approved respectively as listed for the unlicensed radios (Bluetooth/Wi-Fi)
Host Labeling
The following statements are required to be on the host label:
This device contains FCC ID: {Add the FCC ID of the specific device}
This device contains equipment certified under IC ID: {Add the IC ID of the specific device}
For additional labeling requirements, see the product's Labeling Requirements. For the FCC and IC IDs, see specific
certificate information in the Regulatory Statement chapter.
SIM CARD AND ACCOUNT ACTIVATION
18 SocketModem
®
Cell MTSMC-MNA1 Device Guide
Chapter 5 – SIM Card and Account Activation
To use the device, set up a wireless account with your network provider:
1. Contact your network provider to obtain an account and a SIM card for their network. This device
requires a mini SIM (2FF).
2. Give the provider the following:
a. The device’s unique 15-character IMEI number located on the device label.
b. The device model number, also located on the device label. This number allows the carrier to verify
that the device is approved for operation on their network.
Important: Check your product’s label for the correct information to provide your wireless carrier.
Provide the model number (not the ordering part number) listed on the label.
3. Follow your provider's instructions for activating their SIM card on their network.
DUAL CARRIER FIRMWARE FOR CELLULAR RADIO
SocketModem
®
Cell MTSMC-MNA1 Device Guide 19
Chapter 6 – Dual Carrier Firmware for Cellular Radio
This device uses a cellular radio with dual carrier firmware meaning that it can be used on different carrier
networks (not simultaneously). The device can be used on either the Verizon or AT&T/other networks. The device
is configured for AT&T/others by default.
To check that your device is configured for the desired network:
AT#FWSWITCH?
If response is:
#FWSWITCH: 0
The device is configured for AT&T/other networks.
If response is:
#FWSWITCH: 1
The device is configured for Verizon.
To switch carrier networks:
From AT &T to Verizon:
AT#FWSWITCH=1,1
From Verizon to AT&T:
AT#FWSWITCH=0,1
Note: For the Link status (LS) LED to function, you must issue the command AT#GPIO=1,0,2 any time you use
the firmware switch command (AT#FWSWITCH=0 or AT#FWSWITCH=1).
CARRIER SPECIFIC NOTICE
20 SocketModem
®
Cell MTSMC-MNA1 Device Guide
Chapter 7 – Carrier Specific Notice
Firmware Over the Air (FOTA) Script
Verizon Requirement: Firmware Over The Air (FOTA) - Scripting
Products: MultiTech MTC-MVW1, MTC-MNA1, MTC-LNA4, MTSMC-MVW1, MTSMC-MNA1, MTSMC-LNA4, MTSMC-
MNG2, MTCM-LNA3, and MTCAP-LNA3 Series
Cellular Radio Modules:
For MVW1 (Cat M1): ME910C1-NV
For MNA1 (Cat M1): ME910C1-NA
For MNG2 (Cat M1): ME910C1-WW
For LNA4 (Cat 4): LE910-NA V2
For LNA3 (Cat 1): LE910-NA1
At times, your device may require a critical update to radio firmware for devices connecting to the network. To
stay compliant to Verizon’s LTE requirements you must implement FOTA. Failure to perform a critical update could
result in losing access to the Verizon network.
MultiTech has developed a script for customers to use in order to initiate a FOTA update from the (the customer’s)
local host processor (pull FOTA).
MultiTech LTE Category M1, Cat 1, and Cat 4 devices for Verizon will allow the customer to initiate a FOTA update
from a remote server (push FOTA) as required and communicated by Verizon.
If your device does not include local processing capabilities, you will be required to upgrade when that release
becomes available.
Below is an example of a FOTA process for an LTE cellular module (the same steps would work for other LTE
devices just using different file names) you could implement in your host system. You may implement the process
below or implement your own FOTA solution.
In the example below, your host system application periodically accesses a file placed on an FTP server of your
choosing and reads file contents to determine if a firmware update is required. Contact MultiTech at
support.multitech.com for test delta files and to review your process prior to deployment.
Cellular Module FOTA Script Example Process
1. Set up an FTP server to contain a folder for future module firmware files.
2. Assign a unique username/password to access the FTP server.
3. Create and place a file on your FTP server named firmwarecheck.csv to be downloaded and read by your
cellular radio module FTP client host application. Include the following types of information in the file.
You can include additional information as needed.
a. The firmware version and build your LTE device should currently be using.
b. Path on current FTP server where firmware update file resides.
c. The date/time interval at which the host application should next perform a FOTA check in.
d. FTP server IP address which the host application should access during next FOTA check in.
e. Credentials for the FTP server where host application should next perform a FOTA check in.
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
La page est en cours de chargement...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
Multitech MTSMC-MNA1 Mode d'emploi
- Taper
- Mode d'emploi
- Ce manuel convient également à
dans d''autres langues
- English: Multitech MTSMC-MNA1 User guide
Documents connexes
-
Multitech MTSMC-L4N1 Mode d'emploi
-
Multitech MTQ-MNA1-B02-SP Mode d'emploi
-
Multitech MTQ-MNA1-B01-SP Mode d'emploi
-
-
-
Multitech MTSMC-LSP3-U Mode d'emploi
-
Multitech MTSMC-LVW3.R2-SP Mode d'emploi
-
-
-