aquabrass 19014 Installation Procedures

Catégorie
Robinets
Taper
Installation Procedures
GUIDE D’INSTALLATION
Date 15-2-12
info: www.aquabrass.com
INSTALLATION PROCEDURES
19014
Single hole lavatory faucet
Robinet de lavabo mono trou
GUIDE D’INSTALLATION
Date 15-2-12
info: www.aquabrass.com
INSTALLATION PROCEDURES
GUIDE D’INSTALLATION
Date 15-2-12
info: www.aquabrass.com
INSTALLATION PROCEDURES
3/8” connection
Cutting hole /
perçage Ø 1-3/8”
HOT
CHAUDE
COLD
FROIDE
rubber washer/
rondelle en caoutchou
metal washer/
rondelle en métal
base ange
anneau nition
thread rod
tige letée
metal nut/ écrou
3/8” connection
Cutting hole /
perçage Ø 1-3/8”
HOT
CHAUDE
COLD
FROIDE
rubber washer/
rondelle en caoutchou
metal washer/
rondelle en métal
base ange
anneau nition
thread rod
tige letée
metal nut/ écrou
1/ At the bottom of the spout, insert the flange
base.
2/ Screw the threaded rod and the flexible hoses
into the holes located below the faucet body
(fig.01).
3/ Insert the threaded rod and the flexible hoses
into the hole (fig.02). From under the basin,
insert the metal washer. Secure firmly with
metal nut
4/ Connect two flexibles hoses to the water supply
lines (3/8” connection)
1/ Insérez l’anneau de finition à la base du bec
2/ Sérez la tige filetée and les tubes flexibles dans
le trous se trouvent à la base du robinet.
3/ Insérez la tige filetée dans le trou de votre
lavabo (fig.02) .
En dessous, enfiler la demi-rondelle en métal
autour de la tige et vissez l’écrou en métal pour
bien tenir le robinet en place.
4/ Connectez ensuite les deux flexibles à la ligne
d’alimentation en eau (3/8”)
Fig.01
Fig.02
GUIDE D’INSTALLATION
Date 15-2-12
info: www.aquabrass.com
INSTALLATION PROCEDURES
All aquabrass products carry a full warranty against defects in materials and workmanship. The
warranty will be applied only if the product is purchased from an authorized aquabrass dealer.
The aquabrass warranty is limited strictly to the original consumer purchaser of the product.
Proof of purchase must be made available to aquabrass for all limited warranty claims. Products
that are deemed defective must be returned to our factory for inspection prior to replacement.
The limited warranty is not transferable and is limited to products sold and installed in Canada
and the United States.
residential applications
Mechanical working parts including ceramic disc cartridges for both side valves and pressure
balance, thermo cartridges, stops, diverters etc.
All carry our full limited lifetime warranty to the original purchaser.
aquabrass polished chrome and brushed nickel nishes are warranted for the life of the product
to the original purchaser.
All other nishes will be warranted for ve years. Normal wear of the nish is not covered by
this warranty.
All electronic components and faucets are warranted for two years.
All glass and ceramic basins, light xtures are warranted for one year. Light bulbs are subject to
the warranty of the manufacturer and carry no aquabrass warranty.
All other aquabrass products are warranted for ve years.
commercial industrial applications
All the above product applications will be warranted for two years with the exception of the glass
and ceramic basins, light xtures which will carry a one year warranty. Light bulbs are subject to
the warranty of the manufacturer and carry no aquabrass warranty.
the aquabrass warranty does not cover the following:
- Damages resulting in whole or part from installation error, product abuse, misuse, neglect,
improper maintenance, abrasives,
corrosion and/or accidents whether caused or performed by a professional or anyone else.
- Any and all aquabrass products that are subjected to any type of harsh abrasive, such as deter-
gents or window cleaners.
- Normal wear of the nish.
- The damage is caused by hard water, calcareous deposits or sediments.
- The damage or loss is sustained in a natural calamity such as re, earthquake, ood, thunder,
electrical storm, etc.
aquabrass is not responsible for any labor or shipping charges, or damages whatsoever incurred
in whole or in part from installation, removal, re-installation, repair or replacement of any
aquabrass product or part, as well as any incidental or consequential damages, expenses, losses,
direct or indirect, arising from any cause whatsoever.
To obtain warranty service, please contact the retailer where the product was purchased. The
orginal sales receipt must be available to exercise our warranty.
This warranty is extended to the rst purchaser at retail. This warranty is NOT transferrable.
aquabrass reserves the right to make product specication changes without notice or obligation
and to change or discontinue certains models.
All aquabrass products carry a full warranty against defects in materials and workmanship. The warranty
will be applied only if the product is purchased from an authorized aquabrass dealer. The aquabrass
warranty is limited strictly to the original consumer purchaser of the product. Proof of purchase must be
made available to aquabrass for all limited warranty claims. Products that are deemed defective must be
returned to our factory for inspection prior to replacement.
The limited warranty is not transferable and is limited to products sold and installed in Canada and the
United States.
residential applications
Mechanical working parts including ceramic disc cartridges for both side valves and pressure balance,
thermo cartridges, stops, diverters etc.
All carry our full limited lifetime warranty to the original purchaser.
aquabrass polished chrome and brushed nickel nishes are warranted for the life of the product to the
original purchaser.
All other nishes will be warranted for ve years. Normal wear of the nish is not covered by this war-
ranty.
All electronic components and faucets are warranted for two years.
All glass and ceramic basins, light xtures are warranted for one year. Light bulbs are subject to the war-
ranty of the manufacturer and carry no aquabrass warranty.
All other aquabrass products are warranted for ve years.
commercial industrial applications
All the above product applications will be warranted for two years with the exception of the glass and
ceramic basins, light xtures which will carry a one year warranty. Light bulbs are subject to the warranty
of the manufacturer and carry no aquabrass warranty.
the aquabrass warranty does not cover the following:
- Damages resulting in whole or part from installation error, product abuse, misuse, neglect, improper
maintenance, abrasives,
corrosion and/or accidents whether caused or performed by a professional or anyone else.
- Any and all aquabrass products that are subjected to any type of harsh abrasive, such as detergents or
window cleaners.
- Normal wear of the nish.
- The damage is caused by hard water, calcareous deposits or sediments.
- The damage or loss is sustained in a natural calamity such as re, earthquake, ood, thunder, electrical
storm, etc.
aquabrass is not responsible for any labor or shipping charges, or damages whatsoever incurred in whole
or in part from installation, removal, re-installation, repair or replacement of any aquabrass product or
part, as well as any incidental or consequential damages, expenses, losses, direct or indirect, arising from
any cause whatsoever.
To obtain warranty service, please contact the retailer where the product was purchased. The orginal
sales receipt must be available to exercise our warranty.
This warranty is extended to the rst purchaser at retail. This warranty is NOT transferrable.
aquabrass reserves the right to make product specication changes without notice or obligation and to
change or discontinue certains models.
Limited lifetime warranty
Garantie limitée à vie
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

aquabrass 19014 Installation Procedures

Catégorie
Robinets
Taper
Installation Procedures

dans d''autres langues