Sollae Systems CIE-H12G Manuel utilisateur

CIE-H12G User Manual Ver. 1.1

- 0 -

https://www.eztcp.com

Sollae Systems Co., Ltd.

https://www.ezTCP.com

Remote I/O Controller

CIE-H12G User Manual

Version 1.1

CIE-H12G User Manual Ver. 1.1

- 1 -

https://www.eztcp.com

This symbol, found on your product or on its packaging, indicates that this

product should not be treated as household waste when you wish to dispose of

it. Instead, it should be handed over to an applicable collection point for

the recycling of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent potential negative consequences

to the environment and human health, which could otherwise be caused by inappropriate

disposal of this product. The recycling of materials will help to conserve natural

resources. For more detailed information about the recycling of this product, please

contact your local city office, household waste disposal service or the retail store

where you purchased this product.

CIE-H12G User Manual Ver. 1.1 
 
- 2 - 
https://www.eztcp.com 
 
Contents 
Contents ............................................................................................................................................ - 2 - 
1 Overview .................................................................................................................................. - 5 - 
1.1  Overview ............................................................................................................................................................ - 5 - 
1.2  Main Features .................................................................................................................................................. - 5 - 
1.3  Application Examples .................................................................................................................................. - 6 - 
1.4  Specification ..................................................................................................................................................... - 7 - 
1.4.1
 
H/W specification ................................................................................................................................... - 7 -
 
1.4.2
 
S/W specification .................................................................................................................................... - 7 -
 
1.5  Interface ............................................................................................................................................................. - 8 - 
1.5.1
 
Input Ports ................................................................................................................................................. - 8 -
 
1.5.2
 
An Output Port ..................................................................................................................................... - 10 -
 
1.5.3
 
Ethernet Interface ................................................................................................................................ - 11 -
 
1.5.4
 
Power ......................................................................................................................................................... - 11 -
 
1.5.5
 
System LED ............................................................................................................................................. - 12 -
 
1.5.6
 
ISP Switch ................................................................................................................................................ - 12 -
 
2 Installation and Test ............................................................................................................ - 13 - 
2.1  Installation ..................................................................................................................................................... - 13 - 
2.1.1
 
Setting Network Aera ........................................................................................................................ - 13 -
 
2.2  Simple Test .................................................................................................................................................... - 15 - 
2.2.1
 
Modbus/TCP ........................................................................................................................................... - 15 -
 
2.2.2
 
HTTP Test with a WEB browser ..................................................................................................... - 17 -
 
3 Configuration ....................................................................................................................... - 18 - 
3.1  Configuration with ezManager ............................................................................................................ - 18 - 
3.1.1
 
Configuration via LAN ....................................................................................................................... - 18 -
 
4 Operation Modes ................................................................................................................ - 19 - 
4.1  Operation Modes ....................................................................................................................................... - 19 - 
4.2  How to enter each mode ....................................................................................................................... - 19 - 
4.3  Normal Mode ............................................................................................................................................... - 20 - 
4.4  Serial Configuration mode ..................................................................................................................... - 20 - 
4.4.1
 
Factory Reset .......................................................................................................................................... - 20 -
 
4.5  ISP mode ........................................................................................................................................................ - 20 - 
4.5.1
 
Configuring Parameters .................................................................................................................... - 20 -
 

CIE-H12G User Manual Ver. 1.1 
 
- 3 - 
https://www.eztcp.com 
 
4.5.2
 
Changing Firmware ............................................................................................................................. - 20 -
 
5 I/O Control ............................................................................................................................ - 21 - 
5.1  MODBUS/TCP ............................................................................................................................................... - 21 - 
5.1.1
 
Related Parameters ............................................................................................................................. - 21 -
 
5.1.2
 
Modbus/TCP Slave Mode ................................................................................................................ - 22 -
 
5.1.3
 
Modbus/TCP Master Mode ............................................................................................................. - 22 -
 
5.1.4
 
TCP Connection Modes .................................................................................................................... - 22 -
 
5.1.5
 
Initial Output Value ............................................................................................................................. - 22 -
 
5.1.6
 
Write Pulse .............................................................................................................................................. - 23 -
 
5.1.7
 
Communication with HMI ................................................................................................................ - 23 -
 
5.2  Macro Mode ................................................................................................................................................. - 24 - 
5.2.1
 
Operators ................................................................................................................................................. - 24 -
 
5.2.2
 
Operands ................................................................................................................................................. - 25 -
 
5.2.3
 
Examples of Equations ...................................................................................................................... - 25 -
 
5.3  Web (HTTP) ................................................................................................................................................... - 26 - 
5.3.1
 
Changing port number for HTTP ................................................................................................. - 26 -
 
5.3.2
 
Changing a web page ....................................................................................................................... - 26 -
 
6 Management ........................................................................................................................ - 27 - 
6.1  Changing Firmware ................................................................................................................................... - 27 - 
6.1.1
 
Firmware ................................................................................................................................................... - 27 -
 
6.1.2
 
Processes ................................................................................................................................................. - 27 -
 
6.2  Changing a Web page ............................................................................................................................. - 28 - 
6.2.1
 
Processes ................................................................................................................................................. - 28 -
 
6.3  Status Monitoring....................................................................................................................................... - 29 - 
6.3.1
 
Using TELNET ......................................................................................................................................... - 29 -
 
6.3.2
 
Using ezManager ................................................................................................................................. - 31 -
 
6.4  Factory Reset ................................................................................................................................................ - 35 - 
7 Additional Functions ........................................................................................................... - 36 - 
7.1  General ............................................................................................................................................................ - 36 - 
7.1.1
 
ezTCP Firewall ........................................................................................................................................ - 36 -
 
7.1.2
 
Setting Password .................................................................................................................................. - 37 -
 
7.1.3
 
Notify IPv4 Change ............................................................................................................................. - 37 -
 
7.2  I/O Control .................................................................................................................................................... - 38 - 
7.2.1
 
Notify Input Port Change ................................................................................................................ - 38 -
 
7.2.2
 
Valid Time ................................................................................................................................................ - 38 -

CIE-H12G User Manual Ver. 1.1

- 4 -

https://www.eztcp.com

7.2.3

Delay .......................................................................................................................................................... - 38 -

7.2.4

Master function for configuring Internet switches .............................................................. - 39 -

8 Self-Test in Trouble ............................................................................................................. - 40 -

8.1 Searching problem with ezManager ................................................................................................. - 40 -

8.2 Connection Problem over Modbus/TCP .......................................................................................... - 41 -

8.3 Communication Problem over Modbus/TCP ................................................................................. - 42 -

9 Technical Support and Warranty ...................................................................................... - 43 -

9.1 Technical Support ....................................................................................................................................... - 43 -

9.2 Warranty ......................................................................................................................................................... - 43 -

9.2.1

Free Repair Services ............................................................................................................................ - 43 -

9.2.2

Charged Repair Services ................................................................................................................... - 43 -

10 Precaution and Exemption from Liability ....................................................................... - 44 -

10.1 Precaution ...................................................................................................................................................... - 44 -

10.2 Exemption from Liability ......................................................................................................................... - 45 -

10.2.1

English version ...................................................................................................................................... - 45 -

10.2.2

French version ....................................................................................................................................... - 46 -

11 History ................................................................................................................................... - 48 -

CIE-H12G User Manual Ver. 1.1

- 5 -

https://www.eztcp.com

1 Overview

1.1 Overview

CIE-H12G provides the functionality of remotely monitoring sensors such as

temperature, humidity, and pressure, as well as controlling power supplies remotely.

CIE-H12G detects ON/OFF by receiving digital output from sensors and controls an

output port through remote requests. It supports Modbus/TCP, HTTP, and macro

functions for input/output control.

1.2 Main Features

⚫ 2 digital input ports (dry contact and wet contact)

⚫ 1 digital output port (relay interface)

⚫ Support Modbus/TCP for I/O control function

⚫ Support HTTP for I/O control function

⚫ Provide custom web page function

⚫ Support macro function for output control

⚫ Support for IPv6 (IPv4/IPv6 dual stack)

CIE-H12G User Manual Ver. 1.1

- 6 -

https://www.eztcp.com

1.3 Application Examples

⚫ 1:1 Connection with a remote host (HMI)

Figure 1-1 1:1 Connection with a remote host (HMI)

⚫ 1:N Connection with a remote host (Web)

Figure 1-2 1:N Connection with a remote host (Web)

⚫ Internet switch

Figure 1-3 Internet switch

CIE-H12G User Manual Ver. 1.1

- 7 -

https://www.eztcp.com

1.4 Specification

1.4.1 H/W specification

Power

Input Power

DC 5V (±10%)

Current Consumption

160mA typical

Size

96mm x 57mm x 24mm

Weight

Approximately 68g

Interfaces

Digital Input

2 Digital input ports

(Dry contact / wet contact)

Digital Output

1 Digital output port with relays

Ethernet

RJ45

Network

Ethernet 10Base-T or 100Base-TX (Auto-Sensing)

Auto MDI/MDIX(Cable Auto-sensing)

Temperature

Operate / Storage: -40 ~ 85℃

Certification

KC, CE

Environment

Follows Europe RoHS Directive

Table 1-1 H/W specification

1.4.2 S/W specification

Protocol

TCP, UDP, ICMP, IPv4/IPv6 dual stack, ICMPv6/TCPv6/UDPv6,

ARP, DHCP, DNS, DDNS, Modbus/TCP, HTTP, TELNET

Operation

mode

Normal

Normal communication mode

ISP

F/W upgrade

Communication

Mode

I/O server

Modbus/TCP – Slave/Master, Passive/Active

Web Browser(HTTP), Macro(Stand-alone), Serialized

Modbus/TCP

Programs

ezManager

Configuration program via LAN

ModMap

Modbus/TCP Application for Windows

Table 1-2 S/W specification

CIE-H12G User Manual Ver. 1.1

- 8 -

https://www.eztcp.com

1.5 Interface

1.5.1 Input Ports

CIE-H12A has two input ports and the each has different type with the other. The

one is a “DRY CONTACT” type and the other one is a “WET CONTACT.”

⚫ DRY IN: a non-voltage contact type

The DRY IN port is an input port with a non-voltage contact type. This port

detects ON/OFF based on whether there is a short circuit or an open circuit

between the terminals. If there is a short circuit, the input is judged as ON,

and if there is an open circuit, the input is judged as OFF.

Figure 1-4 the DRI IN port

The ON/OFF determination conditions for the DRY IN port are as follows:

Division

State

Value

Short circuit

HIGH (ON)

1

Open circuit

LOW (OFF)

0

Table 1-3 the DRY IN port

CIE-H12G User Manual Ver. 1.1

- 9 -

https://www.eztcp.com

⚫ WET IN: a wet volage contact type

Figure 1-5 the WET IN port

The WET IN port is an input port with a wet voltage contact method. The port

is insulated through a photocoupler and detects ON/OFF through DC voltage

input. Each port automatically detects polarity.

Figure 1-6 a circuit of the WET IN port

The maximum input voltage for the WET IN port is DC 24V, and the ON/OFF

determination conditions are as follows:

Division

State

Value

Higher than DC 4.5V

HIGH (ON)

1

Otherwise

Undefined

Lower than DC 1.2V

LOW (OFF)

0

Table 1-4 Conditions for determining ON/OFF of input ports



The input port is interfaced with a 5mm terminal block. Thus, use a (-) shaped

screwdriver to connect it with the user device.

CIE-H12G User Manual Ver. 1.1

- 10 -

https://www.eztcp.com

1.5.2 An Output Port

Figure 1-7 an output port

An output port of CIE-H12G is interfaced to a NO (Normal Open) type relay.

Figure 1-8 a circuit diagram of the output port

The operations of an output port are as follows:

Value

Relay contact

0

OFF (open)

1

ON (short)

Table 1-5 Operations of an output port

The maximum allowable current according to the voltage condition of the output

port is as follows.

Voltage Condition

Allowable current

DC 28V

5A

Table 1-6 The maximum allowable current



The maximum allowable current is for resistive loads. It is recommended to design

about 10 ~ 20% of the maximum allowable current for capacitive loads such as SMPS

and inductive loads such as motors.



Use a (-) shaped screwdriver to connect it with users’ devices since the output

port is interfaced with a 5mm terminal block.

CIE-H12G User Manual Ver. 1.1

- 11 -

https://www.eztcp.com

1.5.3 Ethernet Interface

The Ethernet port of CIE-H12G is support 10M/100Mbps and users can use both 1:1

cable and crossover cable. There is a built in RJ45 connector for interfacing

Ethernet and its specifications are as follows:

Figure 1-9 Ethernet connector

1.5.4 Power

CIE-H12G can be powered by DC 5V source via power jack. The specifications of the

power jack are as follows:

Figure 1-10 power jack

CIE-H12G User Manual Ver. 1.1

- 12 -

https://www.eztcp.com

1.5.5 System LED

CIE-H12G has 4 LEDs to indicate the current system status. Each LED represents the

following status:

place

name

color

LED status

description

RJ45

STS

Yellow

blinks in

every second

assigned an IP address

blinks 4

times at once

without being assigned an IP address by DHCP

On

establishing a TCP connection

Off

operating for the ISP mode

LINK

Green

On

establishing a connection on a network

blinks

transferring or receiving network data

Front

panel

DI

Yellow

On

when input ports’ signal is ON

DO

Green

On

when the output port’s signal is ON

Table 1-7 system LED

1.5.6 ISP Switch

There is an ISP switch on the side of the product. You can use this switch to

operate the CIE-H12G in ISP mode or serial configuration mode. Additionally, this

switch is used to reset the environmental values of the product.

CIE-H12G User Manual Ver. 1.1

- 13 -

https://www.eztcp.com

2 Installation and Test

2.1 Installation

connect the Ethernet port to your PC directly or through a switching hub.

Figure 2-1 Installation

2.1.1 Setting Network Aera

This step is for setting both CIE-H12G and your PC to be located on the same

network to establish a TCP connection.

⚫ Setting of the PC

Set the IP address to the Ethernet adapter of the PC connected to the product

as follows.

Figure 2-2 Setting an IP address of the PC

CIE-H12G User Manual Ver. 1.1

- 14 -

https://www.eztcp.com

⚫ Setting of CIE-H12G

CIE-H12G uses ezManager as it’s a configuration program. The Simple Test is

performed with the environmental variables of CIE-H12G set to their default

values. The main environmental variables and their default values of CIE-H12G

are as follows:

Parameters

Default Values

Network

Local IP Address

10.1.0.1

Subnet Mask

255.0.0.0

I/O Port

Web (HTTP)

Checked

Web (HTTP) Port

80

Modbus/TCP

Checked

Master/Slave

Slave

Connection Mode

Passive Connection

Multiple Connection

1

Local Port

502

Option

Telnet

Checked

IP Address Search

Checked

Table 2-1 default values of some major parameters

CIE-H12G User Manual Ver. 1.1

- 15 -

https://www.eztcp.com

2.2 Simple Test

2.2.1 Modbus/TCP

This is a test for monitoring and controlling with Modbus/TCP. This test uses the

Modbus/TCP program in ezManager.

Figure 2-3 Modbus/TCP test program

① Search the connected CIE-H12G with [Search All] button.

② Select a MAC address of searched product on the [search result].

③ Click the [Tools] - [Modbus/TCP] button.

④ The test program will appear on the right side of the ezManager.

CIE-H12G User Manual Ver. 1.1

- 16 -

https://www.eztcp.com

⚫ Modbus/TCP test

Figure 2-4 Modbus/TCP test

① Input the IP address of CIE-H12G

② Input the local port for Modbus/TCP of CIE-H12G

③ Connect by pressing [Connect] button

④ Under the connection, check if the Di LEDs are turned on or off with signal

input

⑤ Check if Do LEDs are turned on or off with clicking the LEDs

⑥ Click the [Disconnect] button after the test is completed

CIE-H12G User Manual Ver. 1.1

- 17 -

https://www.eztcp.com

2.2.2 HTTP Test with a WEB browser

This is for testing the operation of the I/O ports of CIE-H12G via HTTP. The test

was implemented on a WEB browser.

Figure 2-5 HTTP test

① Input the IP address of your CIE-H12G on the address field (default:

10.1.0.1).

② Check if the DI LEDs are turned on or off with HIGH signal.

③ Check if the DO LED is turned on or off with clicking the LED.

④ Press the [Reload] button to update the status.

⚫ The way to control the output port manually

Division

On/Off

Pulse

Parameter

oi (Lower case, i is port number)

pi (Lower case, i is port number)

Value

ON

OFF

Time (ms)

1

0

1~10000

Example

http://10.1.0.1/index.html?o0=1

http://10.1.0.1/index.html?p0=1000

Table 2-2 The way to control an output port manually

CIE-H12G User Manual Ver. 1.1

- 18 -

https://www.eztcp.com

3 Configuration

3.1 Configuration with ezManager

3.1.1 Configuration via LAN

⚫ Checklists

Make sure of the connection between your PC and CIE-H12G via Ethernet. If they

are in the same network, [MAC Address search] button can be used. Otherwise,

only [IP Address search] is allowed to use.

⚫ Procedures

Figure 3-1 Configuration via LAN

CIE-H12G User Manual Ver. 1.1

- 19 -

https://www.eztcp.com

4 Operation Modes

4.1 Operation Modes

Each of three operation modes are designed for specific purposes, and those are as

follows:

⚫ Normal mode

This mode is for normal data communication. Configuring parameters is also

available in this mode.

⚫ Serial configuration mode

CIE-H12G does not provide configuration function in serial setting mode.

⚫ ISP mode

This mode is for changing firmware. In addition, you can set environmental

parameters even though the security options are activated. You can also reset

the security options.

4.2 How to enter each mode

Figure 4-1 How to enter each mode

① Push the ISP button less than 1 second.

② Reset

③ Transfer a firmware via ezManager

④ Push the function button over than 1 second.

La page charge ...

Sollae Systems CIE-H12G Manuel utilisateur

Sollae Systems CIE-H12G Manuel utilisateur

dans d''autres langues