Samsung PS43F4000AW Manuel utilisateur

Plasma TV

user manual

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________ Serial No. _____________

BN68-04821H

BN68-04821H-03

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

NIGERIA 0800-726-7864 www.samsung.com

Ghana 0800-10077

0302-200077

www.samsung.com

Cote D’ Ivoire 8000 0077 www.samsung.com

Senegal 800-00-0077 www.samsung.com

Cameroon 7095-0077 www.samsung.com

KENYA 0800 545 545 www.samsung.com

UGANDA 0800 300 300 www.samsung.com

TANZANIA 0685 88 99 00 www.samsung.com

SOUTH AFRICA 0860-SAMSUNG (726-7864) www.samsung.com

Botswana 0800-726-000 www.samsung.com

Namibia 8197267864 www.samsung.com

Angola 91-726-7864 www.samsung.com

Zambia 211350370 www.samsung.com

Plasma TV user manual

[PF4000-SH]BN68-04821H-Cover.indd 1 2013-03-22 �� 2:30:06

- English -

• Theslotsandopeningsinthecabinetandinthebackorbottomareprovidedfornecessaryventilation.Toensurereliableoperationofthisapparatus,

andtoprotectitfromoverheating,theseslotsandopeningsmustneverbeblockedorcovered.

-Donotcovertheslotsandopeningswithaclothorothermaterials.

-Donotblocktheslotsandopeningsbyplacingthisapparatusonabed,sofa,rugorothersimilarsurface.

-Donotplacethisapparatusinaconnedspace,suchasabookcaseorbuilt-incabinet,unlessproperventilationisprovided.

• Donotplacethisapparatusnearoroveraradiatororheatregister,orwhereitisexposedtodirectsunlight.

• Donotplaceavesselcontainingwater(vasesetc.)onthisapparatus,asthiscanresultinariskofreorelectricshock.

• Donotexposethisapparatustorainorplaceitnearwater(nearabathtub,washbowl,kitchensink,orlaundrytub,inawetbasement,orneara

swimmingpooletc.).Ifthisappratusaccidentallygetswet,unplugitandcontactanauthorizeddealerimmediately.

• Makesuretopulloutthepowercordfromtheoutletbeforecleaning.

• Thisapparatususebatteries.Inyourcommunity,theremightberegulationsthatrequireyoutodisposeofthesebatteriesproperlytoprotectthe

environment.Pleasecontactyourlocalauthoritiesfordisposalorrecyclinginformation.

• Donotoverloadwalloutlets,extensioncords,oradaptorsbeyondtheircapacity,sincethiscanresultinreorelectricshock.

• Power-supplycordsshouldberoutedsothattheyarenotlikelytobewalkedonorpinchedbyitemsplaceduponoragainstthem.Payparticular

attentiontocordsattheplugend,whereconnectedtoadaptors,andatthepointwheretheyexitfromtheapparatus.

• Toprotectthisapparatusfromalightningstorm,orwhenitisleftunattendedandunusedforlongperiodsoftime,unplugitfromthewalloutletand

disconnecttheantennaorcablesystem.Thiswillpreventdamagetothesetduetolightningandpowerlinesurges.

• BeforeconnectingtheACpowercordtotheDCadaptoroutlet,makesurethevoltagedesignationoftheDCadaptorcorrespondstothelocal

electricalsupply.(dependingonthemodel)

• Neverinsertanythingmetallicintotheopenpartsofthisapparatus.Doingsomaycreateadangerofelectricshock.

• Toavoidelectricshock,nevertouchtheinsideofthisapparatus.Onlyaqualiedtechnicianshouldopenthisapparatus.

• Makesuretoplugthepowercordinuntilitisrmlyinserted.Pullontheplug,notthecord,whenremovingthepowercordfromtheoutlet.Donot

touchthepowercordwithwethands.

• Ifthisappratusdoesnotoperatenormally-inparticular,ifthereareanyunusualsoundsorsmellscomingfromit-unplugitimmediatelyandcontact

anauthorizeddealerorservicecenter.

• BesuretopullthepowerplugoutoftheoutletiftheTVistoremainunusedorifyouaretoleavethehouseforanextendedperiodoftime(especially

whenchildren,elderlyordisabledpeoplewillbeleftaloneinthehouse).

-Accumulateddustcancauseanelectricshock,anelectricleakage,orarebycausingthepowercordtogeneratesparksandheat,orcausethe

insulationtodeteriorate.

• Besuretocontactanauthorizedservicecenter,wheninstallingyoursetinalocationwithheavydust,highorlowtemperatures,highhumidity,

chemicalsubstancesorwhereitwilloperatefor24hoursa

daysuchasinanairport,atrainstation,etc.Failuretodosomaycauseseriousdamage

toyourset.

• Useonlyaproperlygroundedplugandreceptacle.

-Animpropergroundmaycauseelectricshockorequipmentdamage.(ClasslEquipmentonly.)

• Toturnofftheapparatuscompletely,youmustpullthepowerplugoutofthewallsocket.Consequently,thepowerplugshouldbereadilyaccessible

atalltimes.

• Donotallowchildrentohangontotheproduct.

• Storetheaccessories(batteries,etc.)inalocationsafelyoutofthereachofchildren.

• Donotinstalltheproductinanunstablelocationsuchasashakyself,aslantedoor,oralocationexposedtovibration.

• Donotdroporimpartashocktotheproduct.Iftheproductisdamaged,disconnectthepowercordandcontactaservicecenter.

• Tocleantheproduct,unplugthepowercordfromthepoweroutletandwipetheproductusingasoftclothdippedinasmallamountofwater.Donot

useanychemicalssuchaswax,benzene,alcohol,thinners,insecticide,airfreshener,lubricantordetergent.Thismaydamagetheappearanceor

erasetheprintingontheproduct.

•

Donotexposetheapparatustodrippingorsplashing.

• Donotdisposeofbatteriesinare.

• Donotshortcircuit,disassemble,oroverheatthebatteries.

• notshortcircuit,disassemble,oroverheatthebatteries.

• Thereisadangerofexplosionifyoureplacethebatterieswiththewrongtypeofbattery.Replaceonlywiththesameorequivalenttype.

• WARNING-TOPREVENTTHESPREADOFFIRE,KEEPCANDLESOROTHEROPENFLAMESAWAYFROMTHISPRODUCTATALLTIMES.

Warning! Important Safety Instructions

(Please read the safety instructions below before installing and using the product.)

CAUTION

CAUTION:TOREDUCETHERISKOFELECTRICSHOCK,DONOTREMOVE

COVER(ORBACK).THEREARENOUSERSERVICEABLEPARTSINSIDE.RE-

FERALLSERVICINGTOQUALIFIEDPERSONNEL.

RISKOFELECTRICSHOCK.DONOTOPEN.

Thissymbolindicatesthathighvoltageispresentinside.It

isdangeroustomakeanykindofcontactwithanyinternal

partofthisproduct.

Thissymbolindicatesthatimportantliteratureconcerning

operationandmaintenancehasbeenincludedwiththis

product

.

2

English

PF4000-SH_ENG.indd 2 2013-03-22 �� 2:32:01

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and specications may be changed without notice.

Digital TV notice

1. Functionalities related to Digital TV (DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC) digital terrestrial signals

are broadcasted or where you are able to access to a compatible DVB-C (MPEG2 and MPEG4 AAC) cable-TV service. Please check with your

local dealer the possibility to receive DVB-T or DVB-C signal.

2. DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and DVB-C is that for the broadcast

transmission of digital TV over cable. However, some differentiated features like EPG (Electric Programme Guide), VOD (Video On Demand) and

so on, are not included in this specication. So, they cannot be workable at this moment.

3. Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future DVB-T digital terrestrial and

DVB-C digital cable broadcasts cannot be guaranteed.

4. Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for such a service and you may

be required to agree to terms and conditions of their business.

5. Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with some cable service

providers.

6. For more information, please contact your local Samsung customer care centre.

✎

The reception quality of TV may be affected due to differences in broadcasting method between the countries. Please check the TV performance in

the local SAMSUNG Authorized Dealer, or the Samsung Call Centre whether it can be improved by reconguring TV setting or not.

User Instructions

• Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention.

This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when

displaying a still image.

• Heat on the top of the Plasma TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.

• The product is making a “cracking” noise.

A “cracking” noise may occur when the product contracts or expands due to a change in the surrounding environment such as temperature or humidity.

This is normal and not a defect of the unit.

• Cell Defects

The PDP uses a panel consisting of 2,360,000(HD-level) to 6,221,000(FHD-level) pixels which require sophisticated technology to produce. However,

there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

• Avoid operating the TV at temperatures below 41°F (5°C)

• A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the Plasma TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of

the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause similar effects to the

screen.

Damages caused by the above effect are not covered by the Warranty.

• After-images on the Screen.

Displaying still images from Video games for longer than a certain period of time may produce partial after-images.

To prevent this effect, reduce the “brightness” and “contrast” when displaying still images for a long time.

• Warranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

✎

CIS languages (Russian, Ukrainian, Kazakhs) are not available for this product, since this is manufactured for

customers in EU region.

3

English

PF4000-SH_ENG.indd 3 2013-03-22 �� 2:32:02

Check the Symbol!

t

O

This function can be used by pressing the

TOOLS button on the remote control.

NOTE One-Touch Button

Getting Started

6

6 Using the TV’s Controller (Panel Key)

6 Initial Setup

7 Viewing the Remote Control

8 Connections

9 Connecting to a COMMON INTERFACE slot

(Your TV viewing Card Slot)

9 Changing the Input Source

9 Source

Basic Features

10

10 Using the INFO button (Now & Next guide)

10 Memorizing channels

10 Using the Channel menu

13 Locking Programme

13 Other Features

15 Changing the Preset Picture Mode

15 Adjusting Picture Settings

16 Changing the Picture Options

17 Changing the Preset Sound Mode

17 Adjusting Sound Settings

18 Selecting the Sound Mode

Preference Features

19

19 Executing initial setup

19 Setting the Time

19 Using the Sleep Timer

19 Setting the On / Off Timer

20 Economical Solutions

20 Other Features

Advanced Features

22

22 Using the Source List

22 Connecting a USB Device

23 Using the Media Contents

24 Playing the Photos / Videos / Music

27 Using the Self Diagnosis

27 Updating the Software

28 Changing the Use Mode

28 Viewing the Contact Samsung

28 Using the Sports Mode

Other Information

29

29 Teletext Feature

30 Installing the Wall Mount

31 Securing the TV to the Wall

31 Anti-theft Kensington Lock

32 Troubleshooting

35 Licence

35 Storage and Maintenance

36 Specications

37 Index

4

English

Contents

PF4000-SH_ENG.indd 4 2013-03-22 �� 2:32:03

Accessories

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

✎

Cables not included in the package contents can be purchased separately.

• Remote Control & Batteries (AAA x 2)

• Regulatory Guide

• Owner’s Instructions

• Power Cord

• Cleaning Cloth

• Holder-Wire Stand Assembling the Holder-Wire stand

✎

An administration fee may be charged if either

(a) an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual)

(b) you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user manual)

✎

The amount of such administration charge will be advised to you before any work or home visit is carried out.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in re or a problem with the product due to an increase in the internal temperature of the product.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

• If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎

The appearance may differ depending on the product.

✎

Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand. Installation with a wall-mount.

10 cm10 cm

10 cm

5

English

01 Getting Started

PF4000-SH_ENG.indd 5 2013-03-22 �� 2:32:04

Using the TV’s Controller (Panel Key)

The TV's Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.

✎

Some functions which require a PIN code may not be available.

✎

The product colour and shape may vary depending on the model.

✎

Exits the menu when pressing the controller more than 1 second.

✎

When using the controller in the up/down/left/right directions, make sure you do not push the controller in first. If you push

the controller in first it will not move in the up/down/left right directions.

Remote control sensor

TV Controller

The image is drawn by facing the front side of

the TV.

Return

Selecting the Media Play

Selecting a Source

Power off

Selecting the Menu

Function menu

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of

electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Initial Setup

When the TV is initially powered on, a sequence of on-screen prompts will assist in conguring basic settings. Press the

POWERP button. Setup is available only when the source is set to TV.

✎

If you connect any device to HDMI IN 1(STB) before starting the installation, Channel Source will be changed to Set-top

box automatically. If you do not want to select Set-top box, please select Aerial.

If You Want to Reset This Feature...

Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0”. If you want to change

the PIN number, use the Change PIN function.

You should do Setup (MENU → System) again at home even though you did in shop already.

✎

If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the

PIN to “0-0-0-0”: MUTE → 8 → 2 → 4 → POWER (on)

6

English

Getting Started

PF4000-SH_ENG.indd 6 2013-03-22 �� 2:32:04

Viewing the Remote Control

✎

This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, and Volume

buttons.

Installing batteries (Battery size: AAA)

A B C D

P.SIZE

AD/SUBT.

MEDIA.P

SPORTS

Turns the TV on and off.

Displays and selects the available video sources.

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen.

Displays the EPG (Electronic Programme Guide).

Displays information on the TV screen.

Exits the menu.

Press to directly access to channels.

Adjusts the volume.

Alternately select Teletext ON, Double, Mix or OFF.

Displays the main on-screen menu.

Quickly select frequently used functions.

Displays Media Play.

Returns to the previous menu.

Selects the on-screen menu items and changes the

values seen on the menu.

Use these buttons according to the direction on

screen.

Use these buttons in a specic feature.

P.SIZE: Selects the picture size.

AD/SUBT.: Audio Description selection. (Not

available in some locations) / Displays digital

subtitles.

: Turns the Sports Mode on or off.

7

English

01 Getting Started

PF4000-SH_ENG.indd 7 2013-03-22 �� 2:32:05

Connections

COMPONENT / AV IN

AUDIO

VIDEO

EXT (RGB)

AIR/CABLE

ANT IN

(5V 0.5A)

USB

HDMI IN 1

(STB)

HDMI IN 2

EXT

AUDIO OUT

R-AUDIO-L

PR PB Y

COMPONENT OUT

HDMI OUT

AUDIO OUT

R-AUDIO-L

VIDEO OUT

RB

R BRG

WR

R

Y

W R

R

W

R

G

VHF/UHF Antenna

USB

COMMON INTERFACE

or

TV Rear Panel

TV Side Panel

Set top Box / BD Player

HDMI connection

Cable

VCR or DVD

SCART connection

BD Player

Component connection

BD Player

AV connection

✎

The position of port may differ depending

on the model.

✎

It supports both

Component and AV

connection in one

port.

✎

The PDP device may interfere with an amateur radio or AM radio.

✎

When using two-way radio mobile and portable units or amateur

radio or AM radio near by your TV, this may cause the TV to

malfunction.

✎

For set-top box connection using HDMI cable, we highly recommend you to connect the HDMI IN 1(STB) port.

8

English

Getting Started

PF4000-SH_ENG.indd 8 2013-03-22 �� 2:32:06

¦ Connecting to a COMMON INTERFACE slot (Your TV viewing Card Slot)

To watch paid channels, the “CI or CI+ CARD” must be inserted.

• If you do not insert the “CI or CI+ CARD”, some channels will

display the message “Scrambled Signal”.

• The pairing information containing a telephone number, the

“CI or CI+ CARD” ID the Host ID and other information will

be displayed in about 2~3 minutes. If an error message is

displayed, please contact your service provider.

• When the conguration of channel information has nished,

the message “Updating Completed” is displayed, indicating the

channel list is updated.

• The image may differ depending on the model.

✎

NOTE

• You must obtain a “CI or CI+ CARD” from a local cable service provider.

• When removing the “CI or CI+ CARD”, carefully pull it out with your hands since dropping the “CI or CI+ CARD” may

cause damage to it.

• Insert the “CI or CI+ CARD” in the direction marked on the card.

• The location of the COMMON INTERFACE slot may be different depending on the model.

• “CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer.

• If you have any problems, please contact a service provider.

• Insert the “CI or CI+ CARD” that supports the current aerial settings. The screen will be distorted or will not be seen.

Changing the Input Source

¦ Source

TV / Ext. / HDMI1 / HDMI2 / AV / Component

Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver connected to

the TV.

✎

Press the SOURCE button. In the displayed Source list, connected inputs will be highlighted.

✎

Ext. always stays activated.

✎

Press the TOOLS button.

• Edit Name

You can set an external input source name you want.

• Information

You can see detailed information about the connected external device.

✎

The TV model is not allowed for PC connection (distortion or incorrect picture displaying can appear).

9

English

01 Getting Started

PF4000-SH_ENG.indd 9 2013-03-22 �� 2:32:07

Channel Menu

¦ Using the INFO button (Now & Next guide)

The display identies the current channel and the status of

certain audio-video settings.

The Now & Next guide shows daily TV programme information

for each channel according to the broadcasting time.

✎

When you press the INFO button, a channel information

banner will appear on the top of the screen. And then

press the ENTERE button, you can see the details of

the programme.

• Scroll ◄, ► to view information for a desired

programme while watching the current channel.

• Scroll ▲, ▼ to view information for other channels.

¦ Memorizing channels

Aerial

O MENUm → Broadcasting → Aerial → ENTERE

Before your television can begin memorising the available

channels, you must specify the type of signal source that is

connected to the TV.

Auto Tuning

(depending on the country)

O MENUm → Broadcasting → Auto Tuning →

ENTERE

✎

Automatically allocated programme numbers may not

correspond to actual or desired programme numbers. If a

channel is locked, the PIN input window appears.

• Auto Tuning

Aerial (Air / Cable): Select the aerial source to memorise.

✎

When selecting Air, scans for a channel

automatically and stores in the TV.

Channel Type (Digital & Analogue / Digital / Analogue):

Select the channel source to memorise.

When selecting Cable → Digital & Analogue, Digital or

Analogue

–

Operator Selection (depending on the country):

Selects a provider of cable services.

–

Search Mode: Scans for all channels with active

broadcast stations and stores them in the TV.

✎

If you select Quick, you can set up the Network,

Network ID, Frequency, Modulation and

Symbol Rate manually by pressing the button

on the remote control.

–

Network: Selects the Network ID setting mode

among Auto or Manual.

• Network ID: When Network is Manual, you can

set up Network ID using the numeric buttons.

• Frequency: Displays the frequency for the channel

(differs in each country).

• Modulation: Displays available modulation values.

• Symbol Rate: Displays available symbol rates.

• Cable Search Option

(depending on the country & cable channels only)

Sets additional search options such as the frequency and

symbol rate for a cable network search.

Start Frequency / Stop Frequency: Set the start or stop

frequency (differs in each country).

Symbol Rate: Displays available symbol rates.

Modulation: Displays available modulation values.

¦ Using the Channel menu

O MENUm → Broadcasting → Channel List →

ENTERE

Channel List

The Channel List contains the channels your TV displays

when you press the channel button. You can view channel

information, All, TV, Radio, Data/Other, Analogue or

Favourites 1-5.

Press ► (Mode) button to change the channel mode, or press

◄ (Sorting) button to change the channel order according to

channel number or name on the list.

✎

When you press the CH LIST button on the remote

control, Channel List screen will be displayed at once.

Channel Sorting

• Number / Name: Arranges the channel order according to

channel number or name on the list.

10

English

Basic Features

PF4000-SH_ENG.indd 10 2013-03-22 �� 2:32:08

Channel Mode

• Air / Cable: Switches to Air or Cable.

• Edit Favourites: Set channels you watch frequently as

favourites.

✎

For detailed information about using Edit

Favourites, refer to “Edit Favourites”.

• Favourites 1-5: Shows all favourite channels, arranged in

up to ve groups. Each group has a separate screen.

✎

The TV displays Favourites 1-5 only if you have

added favourites using Edit Favourites.

• All: Shows all currently available channels.

• TV: Shows all currently available TV channels.

• Radio: Shows all currently radio channels.

• Data/Other: Shows all currently available MHP or other

channels.

• Analogue: Shows all currently available analogue

channels.

Guide

O MENUm → Broadcasting → Guide → ENTERE

The EPG (Electronic Programme Guide) information is

provided by broadcasters. Using programme schedules

provided by broadcasters, you can specify programmes you

want to watch in advance so that the channel automatically

changes to the selected programme channel at the specied

time. Programme entries may appear blank or out of date

depending on a channel status.

• a Red (Quick Nav): Viewing the TV programmes on the

list quickly using ▲/▼/◄/► buttons.

• b Green (Channel Category): Select the type of channels

you want to display.

• { Yellow (Schedule Manager): Moves to the reserved

programmes in Schedule Manager.

Schedule Manager

O MENUm → Broadcasting → Schedule Manager →

ENTERE

You can set a desired channel to be displayed automatically at

the intended time. In addition, you can view, modify or delete a

channel you have reserved to watch.

✎

You must set the current time first using the Time →

Clock function in the System menu to use this function.

1. Press the Schedule on the Schedule Manager screen.

The Schedule Viewing menu appears.

2. Press the ▲/▼/◄/► buttons to set each option menu.

• Aerial: Select the desired broadcasting signal.

• Channel: Select the desired channel.

• Repeat: Select Once, Manual, Sat~Sun, Mon~Fri

or Everyday to set at your convenience. If you select

Manual, you can set the day you want.

✎

The (c) mark indicates the day you’ve selected.

• Date: You can set the desired date.

✎

It is available when you select Once in Repeat.

• Start Time: You can set the start time you want.

✎

If you want to edit or cancel a reserved schedule, select

the reserved schedule on Schedule Manager. Then

press the ENTERE button and select the Edit or

Delete.

11

English

02 Basic Features

PF4000-SH_ENG.indd 11 2013-03-22 �� 2:32:08

Edit Channel

O MENUm → Broadcasting → Edit Channel →

ENTERE

You can edit or delete channels.

1. Go to Edit Channel screen.

2. Press the ▲/▼ buttons to select the desired channel, then

press the ENTERE button. The (c) mark indicates the

channel you’ve selected.

✎

You can select more than one channel.

✎

Press the ENTERE again to deselect the channel.

✎

Using the coloured and function buttons with the Edit

Channel.

• a Red (Change Number): Changes channel order on

the channel list.

– E (Done): Completes changing the channel

order.

• b Green (Lock / Unlock): Lock a channel so that the

channel cannot be selected and viewed. / Unlock the

channel that you locked.

✎

This function is available only when the Channel

Lock is set to On.

✎

The PIN input screen appears. Enter your 4-digit

PIN. Change the PIN using the Change PIN

option.

• { Yellow (Delete): Deletes a channel from the

channel list.

• }Blue (Select All / Deselect All): Selects or

deselects all channels at once.

• (Go To): Goes to channel directly by pressing

numbers (0~9).

• k (Page): Move to previous or next page.

• T (Tools): Displays the option menu. The option

menu items that appear may differ depending on the

channel status and type.

– Sorting (digital channels only): Changes the list

ordered by channel number or channel name.

– Aerial: Select the desired broadcasting signal.

– Category: Change the channel mode to All, TV,

Radio, Data/Other, Analogue, Recently Viewed,

Most Viewed. The selected channel mode is

displayed.

– Edit Favourites: Go to Edit Favourites screen

directly.

– Rename channel (analogue channels only):

Assign a name of up to ve characters to a

channel. For example, Food, Golf, etc. This makes

it easier to nd and select the channel.

– Channel Info: Display details of the selected

channel.

– Information: Display details of the selected

programme.

Edit Favourites t

O MENUm → Broadcasting → Edit Favourites →

ENTERE

You can add, edit or delete favourite channels.

1. Go to Edit Favourites screen.

2. Press the ▲/▼ buttons to select the desired channel, and

then press ENTERE button.

3. Choose a specic favourite list among Favourites 1-5

using b (Change Fav.) button, and then press the {

(Add) button. The selected channel has been added in

Favourites 1-5.

✎

One favourite channel can be added in several of

favourites among Favourites 1-5.

✎

Using the coloured and function buttons with the Edit

Favourites.

• a Red (Category / Change order)

– Category: Changes the channel mode to All, TV,

Radio, Analogue, Data/Other, Recently Viewed,

Most Viewed. The selected channel mode is

displayed.

– Change order: Changes the favourite channel

order.

– E (Done): Completes changing the channel

order.

• b Green (Change Fav.): Changes favourite list

among Favourites 1-5.

• { Yellow (Add / Delete)

– Add: Adds selected channels to Favourites 1-5.

– Delete: Deletes the favourite channel from

Favourites 1-5.

• } Blue (Select All / Deselect All): Selects or

deselects all channels at once.

• (Go To): Goes to channel directly by pressing

numbers (0~9).

• k (Page): Move to previous or next page.

• T (Tools): Displays the option menu. The option

menu items that appear may differ depending on the

channel status and type.

– Copy to favourites: Edit the selected favourite

channel in Favourites 1-5.

– Rename Favourites: Assign your own favourite

channel name.

– Aerial: Select the desired broadcasting signal.

– Edit Channel: Go to Edit Channel screen directly.

– Information: Display details of the selected

programme.

12

English

Basic Features

PF4000-SH_ENG.indd 12 2013-03-22 �� 2:32:10

¦ Locking Programme

Programme Rating Lock

(depending on the country)

O MENUm → Broadcasting → Programme Rating Lock

→ ENTERE

Prevent unauthorized users, such as children, from watching

unsuitable programme with a user-dened 4-digit PIN code.

If the selected channel is locked, the “\” symbol will be

displayed.

✎

The items of Programme Rating Lock differs

depending on the country.

Channel Lock

O MENUm → Broadcasting → Channel Lock →

ENTERE

Lock channels in Channel menu to prevent unauthorized

users, such as children, from watching unsuitable programme.

✎

Available only when the Source is set to TV.

¦ Other Features

Channel Settings

O MENUm → Broadcasting → Channel Settings →

ENTERE

• Country (Area)

(depending on the country)

The PIN input screen appears. Enter your 4 digit PIN

number.

Digital Channel: Change the country for digital channels.

Analogue Channel: Change the country for analogue

channels.

• Manual Tuning

Scans for a channel manually and stores in the TV.

✎

If a channel is locked, the PIN input window appears.

✎

According to the channel source, Manual Tuning

may be supported.

• Digital Channel Tuning: Scans for a digital channel

manually and stores in the TV. Press the New button

to search the digital channels. When scanning has

nished, a channel is updated in the channel list.

–

When selecting Aerial → Air: Channel,

Frequency, Bandwidth

–

When selecting Aerial →Cable: Frequency,

Modulation, Symbol Rate

• Analogue Channel Tuning: Scans for an analogue

channel. Press the New button to search the channels

by adjusting the Programme, Colour System, Sound

System, Channel, Search.

✎

Channel mode

–

P (programme mode): When tuning is

complete, the broadcasting stations in your

area have been assigned to the position

numbers from P0 to P99. You can select a

channel by entering the position number in

this mode.

–

C (aerial channel mode) / S (cable channel

mode): These two modes allow you to select

a channel by entering the assigned number

for each aerial broadcasting station or cable

channel.

• Fine Tune

(analogue channels only)

If the signal is weak or distorted, ne tune the channel

manually.

✎

Fine tuned channels are marked with an asterisk “*”.

✎

To reset the fine-tuning, select Reset.

• Transfer Channel List

(depending on the country)

Imports or exports the channel map. You should connect a

USB storage to use this function.

✎

The PIN number input screen appears. Enter your 4

digit PIN number.

✎

Supported file systems are FAT and exFAT.

• Delete CAM Operator Prole: Selects the CAM operator

to delete.

13

English

02 Basic Features

PF4000-SH_ENG.indd 13 2013-03-22 �� 2:32:11

Subtitle t

O MENUm → Broadcasting → Subtitle → ENTERE

Use this menu to set the Subtitle mode.

• Subtitle: Switches subtitles on or off.

• Subtitle Mode: Sets the subtitle mode.

• Subtitle Language: Sets the subtitle language.

✎

If the programme you are watching does not

support the Hearing Impaired function, Normal

automatically activates even if the Hearing

Impaired mode is selected.

✎

English is the default in cases where the selected

language is unavailable in the broadcast.

• Primary Subtitle: Sets the primary subtitle.

• Secondary Subtitle: Sets the secondary subtitle.

Audio Options

(digital channels only)

O MENUm → Broadcasting → Audio Options →

ENTERE

• Audio Language t

Change the default value for audio languages.

Primary Audio / Secondary Audio: You can set the

primary or secondary audio.

✎

The available language may differ depending on the

broadcast.

• Audio Format

When sound is emitted from both the main speaker and

the audio receiver, a sound echo may occur due to the

decoding speed difference between the main speaker

and the audio receiver. In this case, use the TV Speaker

function.

✎

Audio Format option may differ depending on the

broadcast. 5.1ch Dolby digital sound is only available

when connecting an external speaker through an

optical cable.

• Audio Description (not available in all locations)

This function handles the Audio Stream for the AD (Audio

Description) which is sent along with the Main audio from

the broadcaster.

Audio Description: Turn the audio description function on

or off.

Volume: Adjust the audio description volume.

Teletext Language

(depending on the country)

O MENUm → Broadcasting → Teletext Language →

ENTERE

• Teletext Language

✎

English is the default in cases where the selected

language is unavailable in the broadcast.

• Primary Teletext / Secondary Teletext

✎

Primary Teletext and Secondary Teletext may not

be supported in some locations.

Digital Text

(UK only)

O MENUm → Broadcasting → Digital Text → ENTERE

If the programme broadcasts with digital text, this feature is

enabled.

✎

MHEG (Multimedia and Hypermedia Information

Coding Experts Group) An International standard

for data encoding systems used in multimedia and

hypermedia. This is at a higher level than the MPEG

system which includes data-linking hypermedia such

as still images, character service, animation, graphic

and video files as well as multimedia data. MHEG is

user runtime interaction technology and is being applied

to various fields including VOD (Video-On-Demand),

ITV (Interactive TV), EC (Electronic Commerce), tele

education, teleconferencing, digital libraries and network

games.

14

English

Basic Features

PF4000-SH_ENG.indd 14 2013-03-22 �� 2:32:12

Common Interface

O MENUm → Broadcasting → Common Interface →

ENTERE

• CI Menu: This enables the user to select from the CAM-

provided menu. Select the CI Menu based on the menu

PC Card.

• CAM video transcoding: You can congure the setting

to transcode the video codec from the CAM automatically.

Turn it Off if you do not want to use it.

✎

You must use a CAM that supports transcoding the

video codec.

• Application Info: View information on the CAM inserted

into the CI slot and on the “CI or CI+ CARD” which is

inserted into the CAM. You can install the CAM anytime

whether the TV is on or off.

1. Purchase a CI CAM module at your nearest dealer or

by phone.

2. Firmly insert the “CI or CI+ CARD” into the CAM in

the direction of the arrow.

3. Insert the CAM with the “CI or CI+ CARD” into the

common interface slot, in the direction of the arrow so

that it aligns parallel with the slot.

4. Check if you can see a picture on a scrambled signal

channel.

Picture Menu

¦ Changing the Preset Picture Mode

Picture Mode t

O MENUm → Picture → Picture Mode → ENTERE

Select your preferred picture type.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Movie: Suitable for watching movies in a dark room.

¦ Adjusting Picture Settings

Cell Light / Contrast / Brightness / Sharpness /

Colour / Tint (G/R)

Your television has several setting options for picture quality

control.

✎

NOTE

• In analogue TV, Ext., AV modes of the PAL system,

the Tint (G/R) function is not available.

• Settings can be adjusted and stored for each external

device connected to the TV.

• Lowering picture brightness reduces power

consumption.

Picture Size

O MENUm → Picture → Picture Size → ENTERE

Set the various picture options such as picture size and aspect

ratio.

✎

The available items may differ depending on the selected

mode.

✎

Depending on the input source, the picture size options

may vary.

• Picture Size t: Your cable box/satellite receiver

may have its own set of screen sizes as well. However, we

highly recommend you use 16:9 mode most of the time.

Auto Wide: Automatically adjusts the picture size to the

16:9 aspect ratio.

16:9: Sets the picture to 16:9 wide mode.

Wide Zoom: Magnies the picture size more than 4:3.

✎

Adjusts the Position by using ▲, ▼ buttons.

Zoom: Magnies the 16:9 wide pictures vertically to t the

screen size.

✎

Adjusts the Zoom or Position by using ▲, ▼ button.

4:3: Sets the picture to basic (4:3) mode.

✎

Do not watch in 4:3 format for a long time. Traces

of borders displayed on the left, right and centre of

the screen may cause image retention (screen burn)

which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component (1080i /

1080p) signals are inputted.

15

English

02 Basic Features

PF4000-SH_ENG.indd 15 2013-03-22 �� 2:32:13

• Zoom/Position: Adjust the picture size and position. It is

only available in Zoom.

• Position: Adjust the picture position. It is only available in

Screen Fit or Wide Zoom.

✎

NOTE

• After selecting Screen Fit in HDMI (1080i / 1080p) or

Component (1080i / 1080p) mode, you may need to

centre the picture:

1. Select the Position. Press the ENTERE button.

2. Press the ▲, ▼, ◄ or ► button to move the

picture.

• If you want to reset the position you adjusted, select

Reset in the Position screen. The picture will be set to

its default position.

• If you use the Screen Fit function with HDMI 720p

input, 1 line will be cut at the top, bottom, left and right

as in the overscan function.

• 4:3 Screen Size: Available only when picture size is set

to Auto Wide. You can determine the desired picture size

at the 4:3 WSS (Wide Screen Service) size or the original

size. Each European country requires different picture size.

PIP

O MENUm → Picture → PIP → ENTERE

You can watch the TV tuner and one external video source

simultaneously. For example, if you have a cable box

connected to the Cable In jack, you can use PIP to watch

programs from the cable box and watch a movie from a Blu-

ray player attached to the HDMI In jack.

✎

NOTE

• If you turn the TV off while watching in PIP mode, the

PIP window will disappear.

• You may notice that the picture in the PIP window

becomes slightly unnatural when you use the main

screen to view a game or karaoke.

• PIP settings

Main picture Sub picture

Component, HDMI TV

• PIP: Activate or deactivate the PIP function.

• Aerial: Select either Air or Cable as the input source

for the sub-screen.

• Channel: Select the channel for the sub-screen.

• Size: Select a size for the sub-picture.

• Position: Select a position for the sub-picture.

• Sound Select: You can choose the desired sound in

PIP mode.

¦ Changing the Picture Options

Advanced Settings

O MENUm → Picture → Advanced Settings →

ENTERE

(available in Standard / Movie mode)

You can adjust the detailed setting for the screen including

colour and contrast.

• Dynamic Contrast: Adjust the screen contrast.

• Black Tone: Select the black level to adjust the screen

depth.

• Flesh Tone: Adjust the esh tone colour.

• RGB Only Mode: Displays the Red, Green and Blue

colour for making ne adjustments to the hue and

saturation.

• Colour Space: Adjust the range of colours available to

create the image.

• White Balance: Adjust the colour temperature for a more

natural picture.

R-Offset / G-Offset / B-Offset: Adjust each colour’s (red,

green, blue) darkness.

R-Gain / G-Gain / B-Gain: Adjust each colour’s (red,

green, blue) brightness.

Reset: Resets the White Balance to its default settings.

• Gamma: Adjust the primary colour intensity.

• Motion Lighting: Reduce power consumption by

brightness control adapted motion.

✎

Only available in Standard mode.

✎

When changing a setting value of Cell Light,

Brightness or Contrast, Motion Lighting will be

set to Off.

16

English

Basic Features

PF4000-SH_ENG.indd 16 2013-03-22 �� 2:32:15

Picture Options

O MENUm → Picture → Picture Options → ENTERE

• Colour Tone

✎

Warm1 or Warm2 will be deactivated when the

picture mode is Dynamic.

✎

Settings can be adjusted and stored for each

external device connected to an input on the TV.

• Digital Clean View: If the broadcast signal received by

your TV is weak, you can activate the Digital Clean View

feature to reduce any static and ghosting that may appear

on the screen.

✎

When the signal is weak, try other options until the

best picture is displayed.

• MPEG Noise Filter: Reduces MPEG noise to provide

improved picture quality.

• HDMI Black Level: Selects the black level on the screen to

adjust the screen depth.

✎

Available only in HDMI mode (RGB signals).

• Film Mode: Sets the TV to automatically sense and

process lm signals from all sources and adjust the picture

for optimum quality.

✎

Available in TV mode and external input mode which

supports SD (480i / 576i) and HD (1080i).

✎

If the screen does not seem natural, change its

option to Off / Auto1 / Auto2 in Film Mode.

• Analog Clean View (analogue channels only): Reduces

diagonal noise in picture caused by the crosstalk of signals.

Picture Off

O MENUm → Picture → Picture Off → ENTERE

The screen is turned off but the sound remains on. Press any

button except volume button to turn on the screen.

Reset Picture

O MENUm → Picture → Reset Picture → ENTERE

Resets your current picture mode to its default settings.

Sound Menu

¦ Changing the Preset Sound Mode

Sound Mode

O MENUm → Sound → Sound Mode → ENTERE

• Standard: Selects the normal sound mode.

• Music: Emphasizes music over voices.

• Movie: Provides the best sound for movies.

• Clear Voice: Emphasizes voices over other sounds.

• Amplify: Increase the intensity of high-frequency sound to

allow a better listening experience for the hearing impaired.

¦ Adjusting Sound Settings

Sound Effect

(standard sound mode only)

O MENUm → Sound → Sound Effect → ENTERE

• DTS TruSurround

This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers using HRTF (Head

Related Transfer Function) technology.

• DTS TruDialog

This function allows you to increase the intensity of a voice

over background music or sound effects so that dialogue

can be heard more clearly.

• Equaliser

Use Equaliser to customize sound setting for each

speaker.

Balance: Adjusts the balance between the right and left

speaker.

100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth

Adjustment): Adjusts the level of specic bandwidth

frequencies.

Reset: Resets the equaliser to its default settings.

17

English

02 Basic Features

PF4000-SH_ENG.indd 17 2013-03-22 �� 2:32:16

Speaker Settings

O MENUm → Sound → Speaker Settings → ENTERE

• Auto Volume

To equalize the volume level on each channel, set to

Normal.

Night: This mode provides an improved sound experience

compared to Normal mode, making almost no noise. It is

useful at night.

✎

To use the volume control on the source device

connected to the TV, set Auto Volume to Off on the

TV. Otherwise, a change to the volume control of the

source device may not be applied.

Additional Settings

O MENUm → Sound → Additional Settings →

ENTERE

• DTV Audio Level (digital channels only): This function

allows you to reduce the disparity of a voice signal (which

is one of the signals received during a digital TV broadcast)

to a desired level.

✎

According to the type of broadcast signal, MPEG /

HE-AAC can be adjusted between -10dB and 0dB.

✎

To increase or decrease the volume, adjust between

the range 0 and -10 respectively.

• Dolby Digital Comp: This function minimizes signal

disparity between a dolby digital signal and a voice signal

(i.e. MPEG Audio, HE-AAC, ATV Sound).

✎

Select Line to obtain dynamic sound, and RF to

reduce the difference between loud and soft sounds

at night time.

Line: Set the output level for signals greater or less than

-31dB (reference) to either -20dB or -31dB.

RF: Set the output level for signals greater or less than

-20dB (reference) to either -10dB or -20dB.

Reset Sound

O MENUm → Sound → Reset Sound → ENTERE

Reset all sound settings to the factory defaults.

¦ Selecting the Sound Mode t

When you set to Dual I-II, the current sound mode is displayed

on the screen.

Audio

Type

Dual I-II Default

A2 Stereo

Mono Mono

Automatic

change

Stereo Stereo ↔ Mono

Dual Dual I ↔ Dual II Dual I

NICAM

Stereo

Mono Mono

Automatic

change

Stereo Mono ↔ Stereo

Dual

Mono → Dual I

 Dual II 

Dual I

✎

If the stereo signal is weak and an automatic switching,

occurs, then switch to the mono.

✎

Only activated in stereo sound signal.

✎

Only available when the Source is set to TV.

18

English

Basic Features

PF4000-SH_ENG.indd 18 2013-03-22 �� 2:32:17

•

System Menu

¦ Executing initial setup

Setup

O MENUm → System → Setup → ENTERE

Congure the channels and the time when setting up the TV

for the rst time or when resetting the unit.

✎

Execute the initial setup following instructions that the TV

guides.

¦ Setting the Time

Time

O MENUm → System → Time → ENTERE

The current time will appear every time you press the INFO

button.

• Clock: Setting the clock is for using various timer features

of the TV.

✎

If you disconnect the power cord, you have to set the

clock again.

Clock Mode: Set up the current time manually or

automatically.

–

Auto: Set the current time automatically using the

time from a digital channel.

✎

The aerial must be connected in order to set the time

automatically.

–

Manual: Set the current time manually.

✎

Depending on the broadcast station and signal, the

auto time set up may not be correct. In this case, set

the time manually.

Clock Set: Set the Date and Time.

✎

Available only when Clock Mode is set to Manual.

✎

You can set the Date and Time directly by pressing

the number buttons on the remote control.

Time Zone (depending on the country): Select your time

zone.

✎

This function is only available when the Clock Mode

is set to Auto.

✎

When selecting Manual in Time Zone, GMT and

DST will be activated.

¦ Using the Sleep Timer

O MENUm → System → Time → Sleep Timer →

ENTERE

• Sleep Timer t: Automatically shuts off the TV after

a preset period of time. (30, 60, 90, 120, 150 and 180

minutes)

✎

Use the ▲/▼ buttons to select a period of time, and

then press ENTERE. To cancel the Sleep Timer,

select Off.

¦ Setting the On / Off Timer

O MENUm → System → Time → On Timer <or> Off

Timer → ENTERE

• On Timer: You can set up three separate On Timer

congurations. (On Timer 1, On Timer 2, On Timer 3)

Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat,

Sat~Sun or Manual to set at your convenience. If you

select Manual, you can set up the day you want to activate

the timer.

✎

The c mark indicates the day you’ve selected.

Time: Set the hour and minute.

Volume: Set the desired volume level.

Source: To select the source of the content that will play

when the TV turns on. You can:

–

Select TV and have the TV display a specic air or

cable channel.

–

Select USB and have the TV play back photo or

audio les from a USB device.

–

Select a source on your TV that you have connected

a set-top box to, and have the TV display a channel

from the set-top box.

✎

The USB device must be connected to your TV

before you can select USB.

✎

If you select a source other than TV or USB, you

must:

• Have a cable or satellite set-top box attached to

that source

• Set the set-top box to the channel you want to

watch when the TV goes on

• Leave the set-top box turned on.

✎

When you select a source other than TV or USB, the

Aerial and Channel options will disappear.

19

Preference Features

03 Preference Features

English

PF4000-SH_ENG.indd 19 2013-03-22 �� 2:32:18

• Aerial (when the Source is set to TV): Select ATV or DTV.

Channel (when the Source is set to TV): Select the

desired channel.

Music / Photo (when the Source is set to USB): Select a

folder in the USB device containing music or photo les to

be played when the TV is turned on automatically.

–

If there is no music le on the USB device or the

folder containing a music le is not selected, the timer

function does not operate correctly.

–

When there is only one photo le in the USB device,

the slide show will not play.

–

If a folder name is too long, the folder cannot be

selected.

–

Each USB you use is assigned its own folder. When

using more than one of the same type of USB, make

sure the folders assigned to each USB have different

names.

–

It is recommended that you use a USB memory stick

and a multi card reader when using On Timer.

–

The On Timer function may not work with USB

devices with a built-in battery, MP3 players, or PMPs

made by some manufacturers because these devices

take a long time to be recognized.

• Off Timer: You can set up three separate Off Timer

congurations. (Off Timer 1, Off Timer 2, Off Timer 3)

Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat,

Sat~Sun or Manual to set at your convenience. If you

select Manual, you can set up the day you want to activate

the timer.

✎

The c mark indicates the day you’ve selected.

Time: Set the hour and minute.

¦ Economical Solutions

Eco Solution

O MENUm → System → Eco Solution → ENTERE

• Energy Saving: This adjusts the brightness of the TV in

order to reduce power consumption.

• No Signal Power Off: To avoid unnecessary energy

consumption, set how long you want the TV to remain on if

it’s not receiving a signal.

• Auto Power Off: The TV will be automatically turned off

when no user operation is received for 4 hours.

✎

If the Auto Power Off option is set to Off, the TV

will stay on even if no operations are performed on

the TV.

¦ Other Features

Menu Language

O MENUm → System → Menu Language → ENTERE

Set the menu language.

Screen Burn Protection

O MENUm → System → Screen Burn Protection →

ENTERE

To reduce the possibility of screen burn, this unit is equipped

with Pixel Shift screen burn prevention technology. Pixel Shift

moves the picture slightly on the screen. The Time function

setting allows you to programme the time between movement

of the picture in minutes.

Your TV also has the following additional screen burn

protection functions:

• Pixel Shift

• Auto Protection Time

• Scrolling

• Side Grey

• Pixel Shift: Using this function, you can set the TV to move

pixels minutely on the PDP screen in a horizontal or vertical

direction to minimize after images on the screen.

✎

Available Pixel Shift Settings and Optimum Settings

Item TV / HDMI

Horizontal 0~4 4

Vertical 0~4 4

Time (minute) 1~4 min 4 min

✎

The Pixel Shift value may differ depending on the

monitor size (inches) and mode.

✎

This function is not available in the Screen Fit mode.

20

Preference Features

English

PF4000-SH_ENG.indd 20 2013-03-22 �� 2:32:19

La page charge ...

Samsung PS43F4000AW Manuel utilisateur

Samsung PS43F4000AW Manuel utilisateur

dans d''autres langues

Documents connexes