SportsArt S918 Le manuel du propriétaire

Marque: SportsArt

Modèle: S918

Catégorie: Fitness, gymnastique

Taper: Le manuel du propriétaire

Sports Art Industrial Co., Ltd. TUV-CERT ISO 9001/9002/14000 Certied Quality Products 2013.07.23

S918 Low Row

Owner’s Manual

S918 OWNER’S MANUAL CONTENTS

1. INTRODUCTION ................................................................................ 2

2. SAFETY PRECAUTIONS .................................................................. 3

3. LIST OF PARTS ................................................................................. 4

4. ASSEMBLE THE PRODUCT ............................................................. 6

STEP 1 Install the Rear Covers .............................................................. 6

STEP 2 Install the Main Frame .............................................................. 7

STEP 3 Install the Belt ........................................................................... 8

STEP 4 Install the Seat Cushion ............................................................ 9

STEP 5 Install the Weight Stack Covers ................................................ 10

STEP 6 Install the Storage Tray Holder ................................................. 11

STEP 7 Belt Tension Adjustment Instructions ........................................ 12

5. MAINTENANCE ................................................................................ 13

MAINTENANCE Machine Maintenance ................................................ 13

MAINTENANCE Schedule .................................................................... 15

MAINTENANCE Task List .................................................................... 16

MAINTENANCE One-Year Maintenance Log ....................................... 17

6. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 18

1. INTRODUCTION

Congratulations on the purchase of a high quality SportsArt product, the S918

Low Row machine. Constructed of high quality materials and designed for years of

reliable performance, this product was made for full commercial use.

Before this product is assembled or operated, we recommend that you familiarize

yourself with this manual. Understanding the correct assembly and operation of

this product will help ensure that exercisers obtain their tness goals safely and

successfully.

2. SAFETY PRECAUTIONS

This product was designed and built for optimum safety. However certain

precautions apply during the use of this product. Please note the following safety

precautions:

• Please read the entire manual before assembly and operation. Make

sure the product is installed and operated as instructed in this manual.

• Assemble and operate the product on a solid, level surface. Do not use

outdoors or near water, including pools and saunas.

• Check the product before every use. Make sure all parts are assembled,

and all fasteners are tightened. Do not use the product if it is disassembled

in any way.

• Wear proper workout clothing. Do not wear loose clothing. Do not wear

shoes with leather soles or high heels. Tie all long hair back. Do not go

barefoot on this product.

• Keep away from moving parts. Moving parts may or may not stop

immediately if an object becomes caught or impedes normal motion.

• Use this product only for its intended purpose as described in this manual.

• Be careful when mounting and dismounting the unit.

• Never operate this product if it has been damaged in any way. If it is

not working properly, or has been dropped or damaged, contact a service

technician for repairs.

• Do not use accessories that are not specically recommended by the

manufacturer. Such parts might cause injuries or cause the unit to fail.

• This product is not intended for use by persons (including children) with

reduced physical, sensory, or mental capabilities, or by people who are

otherwise decient in product knowledge or experience. If such people use

this product, they should be given training and be supervised at all times by

someone responsible for their safety.

• Children should be supervised to ensure that they do not play on or near

the product.

• The user weight limit for this product is 227 kg, 500 lb.

CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR

WORKOUT and consult your physician immediately. Work within your

recommended exercise level. DO NOT work to exhaustion. Before beginning

any exercise program, you should consult with your doctor. It is recommended that

you undergo a complete physical examination.

*NOTE: Regarding the decaled resistance on the unit weight stack, the actual

weight being lifted is configured at a ratio of 1:1. Example: If the stack fork

is engaged at 60KG (132LB) at the weight stack, the actual pulling weight is

60KG (132LB).

3. LIST OF PARTS

Assembly Parts

No. Name Qty. No. Name Qty.

A1 Weight Stack Frame 1 A4 Handle 1

A1a Rear Cover, Top 1 A5 118 Oval Foot Cover A 6

A1b Rear Cover, Bottom 1 A6 118 Oval Foot Cover B 6

A2 Seat Frame 1 A7 Storage Tray 1

A3 Seat Cushion 1

Components on the Product

No. Name Specication Notes

Hex screw M10*P1.5*L35

Spring washer M10

Washer D16*d10.2*t1.0

Nylon hex nut M10

Round head hex screws M6*P1.0*L15

Flat washer D13*d6*t1.0

Pin D10*L119.8

Mushroom hex screws M8*P1.25*L25

Spring washer M8

Fixed plate With Foam

Round head hex screws M8*P1.25*L15

Flat washer D17*d8.3*t2

Nylon hex nut M8

Plastic round head hex screws M6*P1.0*35

Bushings D21.5*10.5

Components in the Hardware Kit

No. Name Qty. Specication Notes

Push rivets 12

L-shaped Allen wrench 2 M5

L-shaped Allen wrench 1 M6

Double open-end wrench 1 8*17

Double open-end wrench 1 13.2*15.2

Double open-end wrench 1 17*23

4. ASSEMBLE THE PRODUCT

Follow instructions below to assemble this product. Note that in this manual

the words “left” and “right” are used to refer to the product and its parts. As

such, these designations correspond to the “left” and “right” sides of a person

in position to exercise on this product. Also, for brevity, the word “screws” or

“nuts” is used where washers and other hardware may be involved.

STEP 1 Install the Rear Covers

(a). Please remove screws (24) from the area A.

(b). First align the Top Rear Cover (A1a) cut out with the B area screws.

Afterwards align the screw holes on top, then tighten it with screws (24). (Note:

the cover needs to be in between mounting columns and mounting plate.)

(c). Repeat the process for Bottom Rear Cover (A1b) with aligning the cut out

to the B area screws. Afterwards, align the screw holes on the bottom, then

tighten them with screws (24). Finally tighten the screws on the area B.

STEP 2 Install the Main Frame

(a). Please remove screws (20) from the weight stack frame (A1).

(b). Connect the seat frame (A2) to the main frame (A1), and use screws (20)

to secure the assembly.

STEP 3 Install the Belt

(a). First remove the pin (21) from the pulley, then pull through the belt before

secure the assembly with pin (21).

(b). Use the hook from the belt to connect the handle (A4).

STEP 4 Install the Seat Cushion

(a). Remove screws (22) from the seat cushion (A3).

(b). Attach the seat cushion (A3) on to the seat frame (A2), and use screws

(22) to secure the assembly.

STEP 5 Install the Weight Stack Covers

(a). Attach the oval foot covers (A5)(A6) onto the weight stack frame (A1)

and seat frame (A2) legs. Align the ends before using the push rivets (10) to

secure the foot covers together.

Note: While installing the weight stack covers, if it can not be put together

due to the Interference of the machine, please swap the direction of the

covers.

STEP 6 Install the Storage Tray Holder

Please follow the instructions (a) through (b) to install the storage tray

(a). Locate the position where the storage tray (A7) attaches to the weight

stack frame frame (A1), then remove the screws (23) from the weight stack

frame.

(b). Attach the storage tray (A7) to the main frame (A1) and use screws (23)

to secure the assembly.

STEP 7 Belt Tension Adjustment Instructions

1. After the installation and the final positioning of the machine, make the

appropriate adjustments to ensure that the machine is working.

2. If the belt is too tight or too loose, first loosen nut A as shown then adjust

nut B. If the belt length is too long, adjust downward; if the belt length is too

short, adjust upward. Adjust the belt to the proper position, then tighten nut

A to secure the belt length.

Note: After adjusting the belt, the gap between nut Aand B must be within

35mm(1.4”). If the gap still exceeds the 35mm limit after the first step, you

need to:

A. Loosen the screws on C and adjust the belt to the proper length.

B. Tighten the scrwes on C.

3. After the adjustment, then the machine should be tested to determine the

functionality of the machine.

5. MAINTENANCE

This section covers maintenance topics and includes a maintenance

schedule, task list, and log.

MAINTENANCE Machine Maintenance

1. Please clean and lubricate the guide rod once a week.

(a). Use a clean, lint-free towel to apply the lubricant onto the guide rods.

(b). Test the weight stack on the guide rod and make sure the operation is

smooth.

(c). Repeat operations (a) and (b) 2 to 3 times.

2. Check the tightness of the cable or belt and follow the steps to make

adjustments.

MAINTENANCE Machine Maintenance

IMPORTANT NOTE

1. Once the machine belt reaches the warranty period, it is recommended to

replace the belt.

2. Belt safety check, after a year in use, check belt weekly. Depend on the

use conditions, increase the frequency of inspections.

(As shown: (A) a belt, (B) the belt extension)

During inspection, if found cracks in the belt or the belt is exposed to other

unusual circumstances, please immediately stop using the machine and

replace the belt.

MAINTENANCE Schedule

Area Day Week Month Quarter Year Notes

1 Exterior Clean.

2 Screws Inspect for looseness

and secure if necessary.

3 Testing To conrm that the

machine is working

properly

4 Cushions Wipe with a damp cloth.

5 Belt Check for damage or

wear. If so, need for

replacement.

6 Guide Rod Clean and lubricate.

MAINTENANCE Task List

Like cars, fitness products require maintenance. Regular maintenance ex-

tends product life, and failure to maintain products can void the manufac-

turer’s warranty. Copy the maintenance log sheet, and record maintenance

work for each fitness product.

Daily tasks

1. Use a clean, lint-free towel to wipe down the product exterior.

2. Inspect all screws. Secure if necessary.

3. Make sure the machine is working properly.

4. Wipe cushions clean with a damp cloth.

Weekly tasks

1. Check the belt for damage or tear.

2. Clean and lubricate guide rods.

Caution

● Please follow standard safety precautions when working on this product.

● Do NOT use cleaners with alcohol, ammonia, or other damaging chemi-

cals. The use of such chemicals can damage the product and void the war-

ranty. Never spray or pour any liquid directly onto the product. Doing so can

damage components and void the warranty.

Daily Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Week 22-28

Completed

Daily Tasks Week 29-35 Week 36-42 Week 43-49 Week 50-52

Completed

Weekly Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Weeks 22-28

Completed

Weekly Tasks Weeks 29-35 Weeks 35-42 Weeks 43-49 Weeks 50-52

Completed

Monthly tasks 1 2 3 4 5 6 7 8 9 10 11 12

Completed

Quarterly Tasks Quarter 1 Quarter 2 Quarter 3 Quarter 4

Completed

Yearly Tasks Year 1

Completed

Notes: __________________________________________________________

________________________________________________________________

MAINTENANCE One-Year Maintenance Log

Facility:_______________________ Supervisor:____________________

Product model number:__________ Serial number:_________________

Start date: ____________________ End date:_____________________

6. CONSIGNES DE SÉCURITÉ IMPORTANTES

Le produit SportsArt a été conçu et fabriqué afin d’assurer une sécurité optimale.

Cependant certaines précautions s’appliquent chaque fois que vous utilisez votre produit.

• Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez aussi

noter les consignes de sécurité suivantes:

• Veuillez lire attentivement les instructions et installer le produit selon les

instructions.

• Assemblez et faites fonctionner le produit sur une surface solide et plane; NE

PAS l’utiliser à l’extérieur ou près de l’eau.

• En aucun cas, ne laissez des enfants à proximité ou sur le produit.

• Vériez le tapis de course avant chaque utilisation. Assurez-vous que toutes les

pièces sont assemblées et que tous les éléments de xation sont serrés. NE PAS

utiliser le produit si l’appareil est démonté de quelque façon.

• Gardez vos mains loin des pièces mobiles.

• Portez des vêtements d’entraînement appropriés; NE PORTEZ PAS de

vêtements amples. NE PORTEZ PAS de chaussures à semelles en cuir ou à talons

hauts. Attachez les cheveux longs.

• Soyez prudent lors du montage et démontage de l’appareil.

• NE PAS utiliser d’accessoire non spéciquement recommandé par le fabricant.

Car cela pourraient provoquer des blessures ou entraîner une panne de l’appareil.

• Débranchez l’appareil de la prise avant l’entretien ou la suppression de toute

pièce.

• Une surveillance étroite est nécessaire quand de produit est utilisé par ou à

proximité d’enfants, de malades ou de personnes handicapées.

• Utilisez ce product uniquement pour l’usage prévu dans ce manuel.

• La limite de poids de l’utilisateur pour le produit est de 227 kg, 500 lb.

• Ce produit n’est pas destiné à être utilisé par des personnes (y compris des

enfants) dont les capacités physiques, sensorielles ou mentales sont réduites ou

qui ne disposent pas de l’expérience ou du savoir nécessaires, sauf si celles-ci

ont au préalable été formées eu égard à l’utilisation de produit par une personne

responsable de leur sécurité.

• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec le

produit.

• Ce produit n’est pas destiné à être utilisé par des personnes (y compris des

enfants) dont les capacités physiques, sensorielles ou mentales sont réduites ou

qui ne disposent pas de l’expérience ou du savoir nécessaires, sauf si celles-ci ont

au préalable été formées eu égard à l’utilisation de ce produit par une personne

responsable de leur sécurité.

• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec le

produit.

ATTENTION

Si vous ressentez une douleur ou si vous avez une sensation anormale, AR-

RÊTEZ VOTRE ENTRAÎNEMENT et consultez immédiatement votre médecin.

Entraînez-vous à votre niveau d’exercice recommandé. NE PAS s’entraîner jusqu’à

l’épuisement. Avant de commencer un programme d’exercice, vous devriez con-

sulter votre médecin. Il est recommandé de faire un examen physique complet.

Dans ce manuel, les mots “gauche” et “droit” sont utilisés en référence aux pièces

et au produit. Comme tels, les mots “gauche” et “droit” font respectivement ré-

férence aux côtés gauche et droit de l’exerciseur. De même pour plus de conci-

sion, le mot «vis» est utilisé dans certains cas où des rondelles, des vis et autres

matériels sont associés.

SportsArt S918 Le manuel du propriétaire

Marque: SportsArt

Modèle: S918

Catégorie: Fitness, gymnastique

Taper: Le manuel du propriétaire

Télécharger le PDF

rapport

dans d''autres langues

English: SportsArt S918 Owner's manual

SportsArt S918 Le manuel du propriétaire

SportsArt S918 Le manuel du propriétaire

dans d''autres langues

Documents connexes