SportsArt S918 Le manuel du propriétaire
- Catégorie
- Fitness, gymnastique
- Taper
- Le manuel du propriétaire
Sports Art Industrial Co., Ltd. TUV-CERT ISO 9001/9002/14000 Certied Quality Products 2013.07.23
S918 Low Row
Owner’s Manual
S918 OWNER’S MANUAL CONTENTS
1. INTRODUCTION ................................................................................ 2
2. SAFETY PRECAUTIONS .................................................................. 3
3. LIST OF PARTS ................................................................................. 4
4. ASSEMBLE THE PRODUCT ............................................................. 6
STEP 1 Install the Rear Covers .............................................................. 6
STEP 2 Install the Main Frame .............................................................. 7
STEP 3 Install the Belt ........................................................................... 8
STEP 4 Install the Seat Cushion ............................................................ 9
STEP 5 Install the Weight Stack Covers ................................................ 10
STEP 6 Install the Storage Tray Holder ................................................. 11
STEP 7 Belt Tension Adjustment Instructions ........................................ 12
5. MAINTENANCE ................................................................................ 13
MAINTENANCE Machine Maintenance ................................................ 13
MAINTENANCE Schedule .................................................................... 15
MAINTENANCE Task List .................................................................... 16
MAINTENANCE One-Year Maintenance Log ....................................... 17
6. CONSIGNES DE SÉCURITÉ IMPORTANTES ................................. 18
2
1. INTRODUCTION
Congratulations on the purchase of a high quality SportsArt product, the S918
Low Row machine. Constructed of high quality materials and designed for years of
reliable performance, this product was made for full commercial use.
Before this product is assembled or operated, we recommend that you familiarize
yourself with this manual. Understanding the correct assembly and operation of
this product will help ensure that exercisers obtain their tness goals safely and
successfully.
3
2. SAFETY PRECAUTIONS
This product was designed and built for optimum safety. However certain
precautions apply during the use of this product. Please note the following safety
precautions:
• Please read the entire manual before assembly and operation. Make
sure the product is installed and operated as instructed in this manual.
• Assemble and operate the product on a solid, level surface. Do not use
outdoors or near water, including pools and saunas.
• Check the product before every use. Make sure all parts are assembled,
and all fasteners are tightened. Do not use the product if it is disassembled
in any way.
• Wear proper workout clothing. Do not wear loose clothing. Do not wear
shoes with leather soles or high heels. Tie all long hair back. Do not go
barefoot on this product.
• Keep away from moving parts. Moving parts may or may not stop
immediately if an object becomes caught or impedes normal motion.
• Use this product only for its intended purpose as described in this manual.
• Be careful when mounting and dismounting the unit.
• Never operate this product if it has been damaged in any way. If it is
not working properly, or has been dropped or damaged, contact a service
technician for repairs.
• Do not use accessories that are not specically recommended by the
manufacturer. Such parts might cause injuries or cause the unit to fail.
• This product is not intended for use by persons (including children) with
reduced physical, sensory, or mental capabilities, or by people who are
otherwise decient in product knowledge or experience. If such people use
this product, they should be given training and be supervised at all times by
someone responsible for their safety.
• Children should be supervised to ensure that they do not play on or near
the product.
• The user weight limit for this product is 227 kg, 500 lb.
CAUTION: If you feel any pain or any abnormal sensations, STOP YOUR
WORKOUT and consult your physician immediately. Work within your
recommended exercise level. DO NOT work to exhaustion. Before beginning
any exercise program, you should consult with your doctor. It is recommended that
you undergo a complete physical examination.
*NOTE: Regarding the decaled resistance on the unit weight stack, the actual
weight being lifted is configured at a ratio of 1:1. Example: If the stack fork
is engaged at 60KG (132LB) at the weight stack, the actual pulling weight is
60KG (132LB).
4
3. LIST OF PARTS
Assembly Parts
No. Name Qty. No. Name Qty.
A1 Weight Stack Frame 1 A4 Handle 1
A1a Rear Cover, Top 1 A5 118 Oval Foot Cover A 6
A1b Rear Cover, Bottom 1 A6 118 Oval Foot Cover B 6
A2 Seat Frame 1 A7 Storage Tray 1
A3 Seat Cushion 1
5
Components on the Product
No. Name Specication Notes
20
Hex screw M10*P1.5*L35
Spring washer M10
Washer D16*d10.2*t1.0
Nylon hex nut M10
21
Round head hex screws M6*P1.0*L15
Flat washer D13*d6*t1.0
Pin D10*L119.8
22
Mushroom hex screws M8*P1.25*L25
Spring washer M8
23
Fixed plate With Foam
Round head hex screws M8*P1.25*L15
Flat washer D17*d8.3*t2
Nylon hex nut M8
24
Plastic round head hex screws M6*P1.0*35
Bushings D21.5*10.5
Components in the Hardware Kit
No. Name Qty. Specication Notes
10
Push rivets 12
L-shaped Allen wrench 2 M5
L-shaped Allen wrench 1 M6
Double open-end wrench 1 8*17
Double open-end wrench 1 13.2*15.2
Double open-end wrench 1 17*23
6
4. ASSEMBLE THE PRODUCT
Follow instructions below to assemble this product. Note that in this manual
the words “left” and “right” are used to refer to the product and its parts. As
such, these designations correspond to the “left” and “right” sides of a person
in position to exercise on this product. Also, for brevity, the word “screws” or
“nuts” is used where washers and other hardware may be involved.
STEP 1 Install the Rear Covers
(a). Please remove screws (24) from the area A.
(b). First align the Top Rear Cover (A1a) cut out with the B area screws.
Afterwards align the screw holes on top, then tighten it with screws (24). (Note:
the cover needs to be in between mounting columns and mounting plate.)
(c). Repeat the process for Bottom Rear Cover (A1b) with aligning the cut out
to the B area screws. Afterwards, align the screw holes on the bottom, then
tighten them with screws (24). Finally tighten the screws on the area B.
7
STEP 2 Install the Main Frame
(a). Please remove screws (20) from the weight stack frame (A1).
(b). Connect the seat frame (A2) to the main frame (A1), and use screws (20)
to secure the assembly.
8
STEP 3 Install the Belt
(a). First remove the pin (21) from the pulley, then pull through the belt before
secure the assembly with pin (21).
(b). Use the hook from the belt to connect the handle (A4).
9
STEP 4 Install the Seat Cushion
(a). Remove screws (22) from the seat cushion (A3).
(b). Attach the seat cushion (A3) on to the seat frame (A2), and use screws
(22) to secure the assembly.
10
STEP 5 Install the Weight Stack Covers
(a). Attach the oval foot covers (A5)(A6) onto the weight stack frame (A1)
and seat frame (A2) legs. Align the ends before using the push rivets (10) to
secure the foot covers together.
Note: While installing the weight stack covers, if it can not be put together
due to the Interference of the machine, please swap the direction of the
covers.
11
STEP 6 Install the Storage Tray Holder
Please follow the instructions (a) through (b) to install the storage tray
(a). Locate the position where the storage tray (A7) attaches to the weight
stack frame frame (A1), then remove the screws (23) from the weight stack
frame.
(b). Attach the storage tray (A7) to the main frame (A1) and use screws (23)
to secure the assembly.
12
STEP 7 Belt Tension Adjustment Instructions
1. After the installation and the final positioning of the machine, make the
appropriate adjustments to ensure that the machine is working.
2. If the belt is too tight or too loose, first loosen nut A as shown then adjust
nut B. If the belt length is too long, adjust downward; if the belt length is too
short, adjust upward. Adjust the belt to the proper position, then tighten nut
A to secure the belt length.
Note: After adjusting the belt, the gap between nut Aand B must be within
35mm(1.4”). If the gap still exceeds the 35mm limit after the first step, you
need to:
A. Loosen the screws on C and adjust the belt to the proper length.
B. Tighten the scrwes on C.
3. After the adjustment, then the machine should be tested to determine the
functionality of the machine.
13
5. MAINTENANCE
This section covers maintenance topics and includes a maintenance
schedule, task list, and log.
MAINTENANCE Machine Maintenance
1. Please clean and lubricate the guide rod once a week.
(a). Use a clean, lint-free towel to apply the lubricant onto the guide rods.
(b). Test the weight stack on the guide rod and make sure the operation is
smooth.
(c). Repeat operations (a) and (b) 2 to 3 times.
2. Check the tightness of the cable or belt and follow the steps to make
adjustments.
14
MAINTENANCE Machine Maintenance
IMPORTANT NOTE
1. Once the machine belt reaches the warranty period, it is recommended to
replace the belt.
2. Belt safety check, after a year in use, check belt weekly. Depend on the
use conditions, increase the frequency of inspections.
(As shown: (A) a belt, (B) the belt extension)
During inspection, if found cracks in the belt or the belt is exposed to other
unusual circumstances, please immediately stop using the machine and
replace the belt.
15
MAINTENANCE Schedule
Area Day Week Month Quarter Year Notes
1 Exterior Clean.
2 Screws Inspect for looseness
and secure if necessary.
3 Testing To conrm that the
machine is working
properly
4 Cushions Wipe with a damp cloth.
5 Belt Check for damage or
wear. If so, need for
replacement.
6 Guide Rod Clean and lubricate.
16
MAINTENANCE Task List
Like cars, fitness products require maintenance. Regular maintenance ex-
tends product life, and failure to maintain products can void the manufac-
turer’s warranty. Copy the maintenance log sheet, and record maintenance
work for each fitness product.
Daily tasks
1. Use a clean, lint-free towel to wipe down the product exterior.
2. Inspect all screws. Secure if necessary.
3. Make sure the machine is working properly.
4. Wipe cushions clean with a damp cloth.
Weekly tasks
1. Check the belt for damage or tear.
2. Clean and lubricate guide rods.
Caution
● Please follow standard safety precautions when working on this product.
● Do NOT use cleaners with alcohol, ammonia, or other damaging chemi-
cals. The use of such chemicals can damage the product and void the war-
ranty. Never spray or pour any liquid directly onto the product. Doing so can
damage components and void the warranty.
17
Daily Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Week 22-28
Completed
Daily Tasks Week 29-35 Week 36-42 Week 43-49 Week 50-52
Completed
Weekly Tasks Weeks 1-7 Weeks 8-14 Weeks 15-21 Weeks 22-28
Completed
Weekly Tasks Weeks 29-35 Weeks 35-42 Weeks 43-49 Weeks 50-52
Completed
Monthly tasks 1 2 3 4 5 6 7 8 9 10 11 12
Completed
Quarterly Tasks Quarter 1 Quarter 2 Quarter 3 Quarter 4
Completed
Yearly Tasks Year 1
Completed
Notes: __________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
MAINTENANCE One-Year Maintenance Log
Facility:_______________________ Supervisor:____________________
Product model number:__________ Serial number:_________________
Start date: ____________________ End date:_____________________
18
6. CONSIGNES DE SÉCURITÉ IMPORTANTES
Le produit SportsArt a été conçu et fabriqué afin d’assurer une sécurité optimale.
Cependant certaines précautions s’appliquent chaque fois que vous utilisez votre produit.
• Lisez entièrement le manuel avant l’assemblage et l’utilisation. Veuillez aussi
noter les consignes de sécurité suivantes:
• Veuillez lire attentivement les instructions et installer le produit selon les
instructions.
• Assemblez et faites fonctionner le produit sur une surface solide et plane; NE
PAS l’utiliser à l’extérieur ou près de l’eau.
• En aucun cas, ne laissez des enfants à proximité ou sur le produit.
• Vériez le tapis de course avant chaque utilisation. Assurez-vous que toutes les
pièces sont assemblées et que tous les éléments de xation sont serrés. NE PAS
utiliser le produit si l’appareil est démonté de quelque façon.
• Gardez vos mains loin des pièces mobiles.
• Portez des vêtements d’entraînement appropriés; NE PORTEZ PAS de
vêtements amples. NE PORTEZ PAS de chaussures à semelles en cuir ou à talons
hauts. Attachez les cheveux longs.
• Soyez prudent lors du montage et démontage de l’appareil.
• NE PAS utiliser d’accessoire non spéciquement recommandé par le fabricant.
Car cela pourraient provoquer des blessures ou entraîner une panne de l’appareil.
• Débranchez l’appareil de la prise avant l’entretien ou la suppression de toute
pièce.
• Une surveillance étroite est nécessaire quand de produit est utilisé par ou à
proximité d’enfants, de malades ou de personnes handicapées.
• Utilisez ce product uniquement pour l’usage prévu dans ce manuel.
• La limite de poids de l’utilisateur pour le produit est de 227 kg, 500 lb.
• Ce produit n’est pas destiné à être utilisé par des personnes (y compris des
enfants) dont les capacités physiques, sensorielles ou mentales sont réduites ou
qui ne disposent pas de l’expérience ou du savoir nécessaires, sauf si celles-ci
ont au préalable été formées eu égard à l’utilisation de produit par une personne
responsable de leur sécurité.
• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec le
produit.
• Ce produit n’est pas destiné à être utilisé par des personnes (y compris des
enfants) dont les capacités physiques, sensorielles ou mentales sont réduites ou
qui ne disposent pas de l’expérience ou du savoir nécessaires, sauf si celles-ci ont
au préalable été formées eu égard à l’utilisation de ce produit par une personne
responsable de leur sécurité.
• Les enfants doivent être encadrés an d’empêcher qu’ils ne jouent avec le
produit.
ATTENTION
Si vous ressentez une douleur ou si vous avez une sensation anormale, AR-
RÊTEZ VOTRE ENTRAÎNEMENT et consultez immédiatement votre médecin.
Entraînez-vous à votre niveau d’exercice recommandé. NE PAS s’entraîner jusqu’à
l’épuisement. Avant de commencer un programme d’exercice, vous devriez con-
sulter votre médecin. Il est recommandé de faire un examen physique complet.
Dans ce manuel, les mots “gauche” et “droit” sont utilisés en référence aux pièces
et au produit. Comme tels, les mots “gauche” et “droit” font respectivement ré-
férence aux côtés gauche et droit de l’exerciseur. De même pour plus de conci-
sion, le mot «vis» est utilisé dans certains cas où des rondelles, des vis et autres
matériels sont associés.
19
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
SportsArt S918 Le manuel du propriétaire
- Catégorie
- Fitness, gymnastique
- Taper
- Le manuel du propriétaire
dans d''autres langues
- English: SportsArt S918 Owner's manual
Documents connexes
-
SportsArt S911 Le manuel du propriétaire
-
SportsArt S961 Le manuel du propriétaire
-
-
-
-
-
-
-
-