104 x 142 mm
13
adverse effects on the operational safety
of the appliance.
∙ The appliance must be used only on a
heat-resistant, level surface.
∙ Do not operate the appliance below
a hanging cupboard or similar object;
there is a risk that escaping steam may
be trapped underneath.
∙ Do not allow the appliance or its power
cord to come into contact with open
amesoranyhotsurfacessuchashot-
plates.
∙ Do not let the power cord hang free, and
keep the cord well away from hot parts
of the housing.
∙Take special care when you carry the
container with hot water in.
∙Always allow the appliance to cool down
beforellingwithfreshwater.
∙ Always remove the plug from the wall
socket,
- in case of any malfunction,
- after use,
- during cleaning.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Intended use
∙ This appliance is solely designed
for heating clean, fresh water. Any
other form of use must be considered
improper and may lead to personal
injuries or material damage.
∙ It is not suitable for heating milk, tea or
other food or beverages.
Thermal safety cut-out
The pre-set thermal safety cut-out protects
the heating element from overheating
should the appliance be erroneously
switched on without any water, or if the
heatingplateiscalcied.Oncethesafety
cut-out has switched off the kettle, it must
beallowedtocooldownsufciently,or
must be descaled before it is switched on
again.
Before using for the rst time
Tocleanthekettle,boilanddiscardtherst
llingofwater.
Boiling water
∙ Remove the water container from its
base.
∙Press the lid-opener on the handle to
openthelid,andllthecontainerwith
water to the desired level, observing the
Min (0.2 l) and Max (0.5 l) markings.
∙Close the lid, and then put the container
back on its base.
∙ Insert the plug into a suitable wall
socket and press the On/Off switch; the
indicator light comes on.
∙ The boiling process begins. After
reaching the boiling point, the appliance
is automatically switched off by the
integral steam cut-off device; the
indicator light goes out.
∙ To interrupt the boiling process, set the
On/Off switch to its Off position.
∙ To pour hot water, remove the container
from its base.
∙ To prevent hot steam from being
emitted, ensure that the lid remains
closed while pouring out the water.