Digital Video Recorders
Quick Guide
V2.00
1
Packing List
Contact your local dealer if the package is damaged or incomplete. The package contents may
vary with device model.
No.
Name
Qty
Unit
1 DVR 1 PCS
2* Power adapter 1 PCS
3* Mouse 1 PCS
4 Screws 1 Set
5 Product documents 1 Set
Remarks:
* means optional and supplied with certain models only.
2
Interfaces
The interface may vary with device model.
Interface Description Interface Description
① Video input ② HDMI output
③ VGA output ④ Network
⑤ USB ⑥ Grounding
⑦ 12V power -
-
3
Disk Installation
The illustrations are for reference only. The actual device may vary.
3.1 Preparation
Prepare a 1# or 2# Philips screwdriver, a pair of antistatic gloves or a wrist strap.
Disconnect power before installation.
1
3.2 HDD Installation
1. Loosen the four screws on the side panels, and remove the upper cover.
2. Insert the screws (e.g., ①) into the disk (②) and tighten halfway.
3. Slide the screws in the holes on the chassis bottom from A to B as illustrated and then
tighten. Tighten two other screws to fasten the hard disk.
4. Put the cover back in place and tighten the screws.
4
Startup and Shutdown
Check that the cables are connected correctly, the device is grounded properly, and the power
supply meets requirements.
4.1 Startup
Connect the device to power to start up the device.
4.2 Shutdown
Go to the live view page, right-click, and then choose
Shutdown
in the shortcut menu.
CAUTION!
Do not disconnect power when the
device is operating or shutting down.
5
Local Operations
5.1 Add IP Camera
Make sure the IP camera to add is connected to the network.
1. Right-click in the live view page, click
Camera
>
Camera
>
Camera
.
A B
2
2. Click
Custom
Add
, enter the IP address and other required information.
3. Check camera status .
If the icon is highlighted, it means the camera is online.
If the icon is grayed out, point to the icon to view failure information. Click the edit button
to modify device information.
NOTE!
•
You can also click to add a device.
• To search for devices in a specified network segment, click Search Segment.
5.2 Recording and Playback
5.2.1 Recording
A 24/7 recording schedule is enabled by default. To modify the recording schedule, go to
Menu
>
Storage
>
Recording Schedule
,
and then set the recording type and time as needed.
5.2.2 Playback
In the live view page, right-click a preview window and select
Playback
to play the recording of
the current day.
NOTE!
If you choose
the
Event
recording type, you need to enable the corresponding alarm function
and configure alarm-triggered recording first.
6
Web Login
Before you begin, check that your PC is connected to your DVR through network.
1. Open the browser on your PC, enter the IP address (default is
192.168.1.30
) in the address
bar, then press
Enter
.
NOTE!
You may need to i
nstall the plugin at your first login. Close all the web browsers before the
installation starts.
2. In the login page, enter the username (
admin
) and password (
123456
), then click
Login
.
3
Disclaimer and Safety Warnings
Copyright Statement
©2022 Zhejiang Uniview Technologies Co., Ltd. All rights reserved.
No part of this manual may be copied, reproduced, translated or distributed in any form or by any means
without prior consent in writing from Zhejiang Uniview Technologies Co., Ltd (referred to as Uniview or
us hereafter).
The product described in this manual may contain proprietary software owned by Uniview and its
possible licensors. Unless permitted by Uniview and its licensors, no one is allowed to copy, distribute,
modify, abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer, or sublicense the
software in any form or by any means.
Trademark Acknowledgements
are trademarks or registered trademarks of Uniview.
The terms HDMI, HDMI High
-Definition Multimedia Interface,
HDMI trade dress and the HDMI Logos are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.
All other trademarks, products, services and companies in this manual or the product described in this
manual are the property of their respective owners.
Export Compliance Statement
Uniview complies with applicable export control laws and regulations worldwide, including that of the
People's Republic of China and the United States, and abides by relevant regulations relating to the
export, re-export and transfer of hardware, software and technology. Regarding the product described
in this manual, Uniview asks you to fully understand and strictly abide by the applicable export laws and
regulations worldwide.
EU Authorised Representative
UNV Technology EUROPE B.V. Room 2945,3rd Floor,Randstad 21-05 G,1314 BD,Almere,Netherlands.
Privacy Protection Reminder
Uniview complies with appropriate privacy protection laws and is committed to protecting user privacy.
You may want to read our full privacy policy at our website and get to know the ways we process your
personal information. Please be aware, using the product described in this manual may involve the
collection of personal information such as face, fingerprint, license plate number, email, phone number,
GPS. Please abide by your local laws and regulations while using the product.
About This Manual
This manual is intended for multiple product models, and the photos, illustrations, descriptions, etc,
in this manual may be different from the actual appearances, functions, features, etc, of the product.
This manual is intended for multiple software versions, and the illustrations and descriptions in this
manual may be different from the actual GUI and functions of the software.
Despite our best efforts, technical or typographical errors may exist in this manual. Uniview cannot
be held responsible for any such errors and reserves the right to change the manual without prior
notice.
Users are fully responsible for the damages and losses that arise due to improper operation.
Uniview reserves the right to change any information in this manual without any prior notice or
indication. Due to such reasons as product version upgrade or regulatory requirement of relevant
regions, this manual will be periodically updated.
Disclaimer of Liability
The product described in this manual is provided on an "as is" basis. Unless required by applicable
law, this manual is only for informational purpose, and all statements, information, and
recommendations in this manual are presented without warranty of any kind, expressed or implied,
4
including, but not limited to, merchantability, satisfaction with quality, fitness for a particular purpose,
and noninfringement.
To the extent allowed by applicable law, in no event shall Uniview’s total liability to you for all
damages for the product described in this manual (other than as may be required by applicable law
in cases involving personal injury) exceed the amount of money that you have paid for the product.
Users must assume total responsibility and all risks for connecting the product to the Internet,
including, but not limited to, network attack, hacking, and virus. Uniview strongly recommends that
users take all necessary measures to enhance the protection of network, device, data and personal
information. Uniview disclaims any liability related thereto but will readily provide necessary security
related support.
To the extent not prohibited by applicable law, in no event will Uniview and its employees, licensors,
subsidiary, affiliates be liable for results arising out of using or inability to use the product or service,
including, not limited to, loss of profits and any other commercial damages or losses, loss of data,
procurement of substitute goods or services; property damage, personal injury, business interruption,
loss of business information, or any special, direct, indirect, incidental, consequential, pecuniary,
coverage, exemplary, subsidiary losses, however caused and on any theory of liability, whether in
contract, strict liability or tort (including negligence or otherwise) in any way out of the use of the
product, even if Uniview has been advised of the possibility of such damages (other than as may be
required by applicable law in cases involving personal injury, incidental or subsidiary damage).
Network Security
Please take all necessary measures to enhance network security for your device.
The following are necessary measures for the network security of your device:
Change default password and set strong password:
You are strongly recommended to change the
default password after your first login and set a strong password of at least nine characters including
all three elements: digits, letters and special characters.
Keep firmware up to date:
It is recommended that your device is always upgraded to the latest version
for the latest functions and better security. Visit Uniview's official website or contact your local dealer
for the latest firmware.
The following are recommendations for enhancing network security of your device:
Change password regularly:
Change your device password on a regular basis and keep the password
safe. Make sure only the authorized user can log in to the device.
Enable HTTPS/SSL:
Use SSL certificate to encrypt HTTP communications and ensure data security.
Enable IP address filtering:
Allow access only from the specified IP addresses.
Minimum port mapping:
Configure your router or firewall to open a minimum set of ports to the WAN
and keep only the necessary port mappings. Never set the device as the DMZ host or configure a full
con e NAT.
Disable the automatic login and save password features:
If multiple users have access to your
computer, it is recommended that you disable these features to prevent unauthorized access.
Choose username and password discretely:
Avoid using the username and password of your social
media, bank, email account, etc, as the username and password of your device, in case your social
media, bank and email account information is leaked.
Restrict user permissions:
If more than one user needs access to your system, make sure each user is
granted only the necessary permissions.
Disable UPnP:
When UPnP is enabled, the router will automatically map internal ports, and the
system will automatically forward port data, which results in the risks of data leakage. Therefore, it is
recommended to disable UPnP if HTTP and TCP port mapping have been enabled manually on your
router.
Multicast:
Multicast is intended to transmit video to multiple devices. If you do not use this function,
it is recommended you disable multicast on your network.
Check logs:
Check your device logs regularly to detect unauthorized access or abnormal operations.
5
Isolate video surveillance network:
Isolating your video surveillance network with other service
networks helps prevent unauthorized access to devices in your security system from other service
networks.
Physical protection:
Keep the device in a locked room or cabinet to prevent unauthorized physical
access.
SNMP:
Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended.
Learn More
You may also obtain security information under Security Response Center at Uniview's official website.
Safety Warnings
The device must be installed, serviced and maintained by a trained professional with necessary safety
knowledge and skills. Before you start using the device, please read through this guide carefully and
make sure all applicable requirements are met to avoid danger and loss of property.
Storage, Transportation, and Use
Store or use the device in a proper environment that meets environmental requirements, including
and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic radiation, etc.
Make sure the device is securely installed or placed on a flat surface to prevent falling.
Unless otherwise specified, do not stack devices.
Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow
adequate space for ventilation.
Protect the device from liquid of any kind.
Make sure the power supply provides a stable voltage that meets the power requirements of the
device. Make sure the power supply's output power exceeds the total maximum power of all the
connected devices.
Verify that the device is properly installed before connecting it to power.
Do not remove the seal from the device body without consulting Uniview first. Do not attempt to
service the product yourself. Contact a trained professional for maintenance.
Always disconnect the device from power before attempting to move the device.
Take proper waterproof measures in accordance with requirements before using the device outdoors.
Power Requirements
Install and use the device in strict accordance with your local electrical safety regulations.
Use a UL certified power supply that meets LPS requirements if an adapter is used.
Use the recommended cordset (power cord) in accordance with the specified ratings.
Only use the power adapter supplied with your device.
Use a mains socket outlet with a protective earthing (grounding) connection.
Ground your device properly if the device is intended to be grounded.
Battery Use Caution
When battery is used, avoid:
Extremely high or low temperature and air pressure during use, storage and transportation.
Battery replacement.
Use the battery properly. Improper use of the battery such as the following may cause risks of fire,
explosion or leakage of flammable liquid or gas.
Replace battery with an incorrect type;
Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery;
Dispose of the used battery according to your local regulations or the battery manufacturer's
instructions.
Avertissement de l’utilisation de la batterie
Lorsque utiliser la batterie, évitez:
Température et pression d'air extrêmement élevées ou basses pendant l'utilisation, le stockage
et le transport.
Remplacement de la batterie.
Utilisez la batterie correctement. Mauvaise utilisation de la batterie comme celles mentionnées ici,
peut entraîner des risques d’incendie, d’explosion ou de fuite liquide de gaz inflammables.
6
Remplacer la batterie par un type incorrect;
Disposer d’une batterie dans le feu ou un four chaud, écraser mécaniquement ou couper la
batterie;
Disposer la batterie utilisée conformément à vos règlements locaux ou aux instructions du fabricant
de la batterie.
Personal safety warnings:
Chemical Burn Hazard. This product contains a coin cell battery. Do NOT ingest the battery. It
can cause severe internal burns and lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and keep it away
from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek
immediate medical attention.
Avertissements de sécurité personnelle:
Risque de brûlure chimique. Ce produit contient une batterie de cellules. N’ingérer pas la
batterie. Si la batterie de cellule est avalée, elle peut causer de graves brûlures internes en
seulement 2 heures et peut entraîner la mort.
Gardez les batteries nouvelles ou utilisées à l’écart des enfants.
Si le compartiment de la batterie ne se ferme pas en toute sécurité, cessez d’utiliser le produit
et gardez-le à l’écart des enfants.
Si vous pensez que des piles ont pu être avalées ou placées à l’intérieur d’une partie du corps,
consultez immédiatement un médecin.
Regulatory Compliance
FCC Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Visit http://en.uniview.com/Support/Download_Center/Product_Installation/Declaration/ for SDoC.
Caution:
The user is cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
LVD/EMC Directive
This product complies with the European Low Voltage Directive
2014/35/EU and EMC Directive 2014/30/EU.
WEEE Directive–2012/19/EU
The product this manual refers to is covered by the Waste Electrical &
Electronic Equipment (WEEE) Directive and must be disposed of in a
responsible manner.
Battery Directive-2013/56/EC
Battery in the product complies with the European Battery Directive
2013/56/EC. For proper recycling, return the battery to your supplier or to a
designated collection point.
7
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
