Rand McNally RVND 7715 Guide de démarrage rapide

Quick Start Guide 1

Guide de Démarrage Rapide 17

1

Important Information About Your RVND

™

7715

Rand McNally Dock: Keep your device up to date by downloading the Rand McNally Dock for your home computer

at www.randmcnally.com/dock and connecting your device with the USB cable provided.

Learn More: Access Tutorial & Tips under Preferences > General on your device for more information, or visit

www.randmcnally.com/support to download the user manual.

Power Button: Press and hold the orange power button to turn the device on or off. The power button can also

be used for quick access to certain features while the device is running. See Preferences > General > Quick Power Press

for options. A red light indicates the battery is charging; a green light indicates the battery is fully charged.

Reset: Use the reset button on the back of the device to restart. This will cancel the current route, but preferences,

address book, and other personal data will be saved.

Install the Mount

Note: Follow all local regulations governing the placement of the mount.

1. Select an area with a line of sight to the sky and GPS satellites to ensure reliable GPS information.

2. Clean and dry the mounting area.

3. Remove the suction cup protective ﬁlm.

4. Adjust the angle of the mount using the thumbscrew.

5. Pull the suction cup lever up to release suction.

6. Plug the power cord into the device and the vehicle’s 12-volt power source.

7. Slide the device onto the mount.

8. Place and hold the mount suction cup against the mounting surface.

9. Press the suction cup lever down until it snaps into place.

10. Adjust the device so that it can be easily seen and does not block the driver’s line of sight.

2

3

1

Enter RV information and access RV-speciﬁc tools.

2

Show location on the map and view navigation instructions.

3

Choose a destination.

4

Select general, route, and map preferences.

5

Mute/unmute the speaker.

6

Adjust speaker volume.

7

Battery status indicator.

Main Menu

1 2 3

4 5 6

7

4

1. Tap RV Tools > RV Info or Warnings.

2. Tap and to view options.

3. Tap the option button to be changed.

4. Enter new settings.

5. Tap to save changes.

1. Tap Preferences.

2. Tap the General, Route or Map tab.

3. Tap and to view options.

4. Tap the option button to be changed.

5. Enter new settings.

6. Tap to save changes.

On the left,

tap on an

option

On the right,

enter settings

for the option

Enter RV Information and Set Warnings

Set Routing and Device Options

On the left,

tap on an

option

On the right,

enter settings

for the option

5

Route to a Destination

1. Tap Choose Destination > New Location.

2. Tap Address.

3. Enter the name of the city. (Note: As you type, the keyboard displays

only the next possible letter.)

4. Prompts appear in the top bar. Tap the city to select. Or, tap List to

view cities beginning with the letter(s) you entered.

5. Enter the street name. (Note: If the letters you need do not appear,

tap Expand Search.)

6. Enter the house number.

See Conﬁrm Destination Window (page 6).

Tips

• You can also route to a new location by City Center, Intersection,

or Latitude/Longitude, or choose Address > Zip Code Search.

• View recent destinations by tapping Choose Destination > History.

View recent cities by tapping Choose Destination > New Location

> Address > History.

• View saved locations by tapping Choose Destination >

Address Book.

6

Conﬁrm Destination Window

1

Destination address.

2

Begin route to destination.

3

Add the location as a via point on the way to

a previously entered destination.*

4

Save the location to the Address Book.

5

Cross reference to printed Rand McNally Road Atlas.

6

View the map.

7

Change the starting location for a route to the

location displayed here.

8

Return to Main Menu.

9

Return to previous window.

*To manage via points, Tap Choose Destination >

Multi-Stop Trips. You can add up to 50 destinations in a

multi-stop trip, and optimize routing for trips of up to 10 stops.

NOTE: This window may include

additional buttons based on the

type of destination selected.

1

3

4

5 6

8

7

9

2

7

1

Repeat spoken next-maneuver instructions.

2

Name of street you will turn onto next.

3

Show arrival time, remaining time, or other options.

4

Slide out to show upcoming exit information.

5

Directions list slideout. Tap Route Display Options

to select turn-by-turn, highway, or map view.

6

Zoom in/zoom out.

7

Access weather data and maps. (Wi-Fi required.)

8

Return to Main Menu.

9

Select a map display option (Heading Up, North Up,

or 3D View).

10

View current road name, upcoming cross road name, or city, county and state.

11

View and save current location, detour, or cancel a route.

12

Tap on the current speed to display the Virtual Dashboard.

(Note: Turns red for speed warnings; set in RV Tools > Warnings.)

13

Current speed limit. Tap to open a “Tell Rand” about speed limits.

14

View the Trafﬁc Window (enabled with trafﬁc receiver accessory).

15

Mute the speaker.

Route Map Window

1

3

4

5

6

8

7

9

2

10

11

12

15

14

13

8

7

6

8

1

3

4

5

2

Find a Point of Interest (POI)

Tap Choose Destination > Points of Interest.

1

Find popular RV-friendly POIs near your current location.

Search for a POI:

2

Near your RV

3

In a particular city

4

Along your route

5

Near your destination

POI Categories:

6

Select a category.

7

Find restaurants, hotels, and other subcategories.

8

View custom POIs that have been uploaded through

the Rand McNally Dock.

9

When on a route, Junction View displays when you have an upcoming maneuver.

Once past the maneuver, Junction View closes and the previous window displays.

1

Signs to follow for the next maneuver.

2

Number and direction of lanes for the next maneuver.

3

Distance to the upcoming maneuver. Distance decreases as you

approach the ramp.

4

Lane assist arrow.

5

Mute the speaker.

6

Return to previous window.

9

Tap location to select.

10

View and edit ratings and comments.

11

Tap to search by available services.

12

Apply or remove services ﬁlter for search results.

9 10

11 12

Find a Point of Interest (POI) -

continued

Junction View

1

2

3

4

56

10

1

Sunrise and sunset times based on vehicle location

(latitude/longitude) and day.

2

Current speed.

3

Elevation at current location.

4

Percentage of current trip completed, distance to next

maneuver, and the number of miles and time spent

on the trip to this point.

5

Average uphill and downhill speeds.

6

Gather trip information for up to three trips. Includes

odometer settings, hours, and speeds.

7

Reset trip information for the selected trip (Tab 1, Tab 2

or Tab 3).

8

Select to automatically reset the information in each tab

after the vehicle has remained stationary for the speciﬁed

number of hours.

9

View fuel logs and add fuel purchase information.

10

Return to the Route Map Window.

1

3

4

5

6

8

7

9

2

Virtual Dashboard

10

11

Tap RV Tools > Checklists, Maintenance, Trails, Fuel.

Then tap on each tab to view.

1

Use Checklists to create and complete task lists to

prepare for a trip.

2

Add notes in the Maintenance tab to record dates of

service for your RV.

3

Use Trails to record a “bread-crumb” path of GPS coordinates

where your RV has traveled. Tap any record to view the trail,

edit the name, or set the color.

4

Use the Fuel tab to view a list of fuel purchases. Tap Add Fuel

to record the date, location and cost of fuel purchase. Tap Save.

Tap any record to make changes.

Checklists, Maintenance, Trails, and Fuel

1 2 3 4

12

For information on setting up a Wi-Fi hotspot through your cellular phone

or laptop computer, please visit www.randmcnally.com/wiﬁhelp for

basic instructions or contact your wireless carrier.

Note: Wi-Fi connectivity requires a supporting feature and data plan

from your wireless service provider.

As the user, you are responsible for all data charges. Please contact

your wireless service provider to make sure you do not exceed the

limits of your data plan.

Once you have established a Wi-Fi hotspot:

1. From the Main Menu, tap Preferences.

2. Tap WiFi in the bottom right corner.

3. Tap Enable WiFi to search for available hotspots.

4. Tap the hotspot you want to connect to.

5. Enter the network password.

6. Tap Disable WiFi to turn Wi-Fi connectivity off.

(Note: Disable to save battery power.)

Wi-Fi

®

13

Weather

Note: This feature requires a Wi-Fi connection.

To view current weather information and the three-day

forecast for your location, tap the Weather icon on

the Route Map Window.

1

Tap to view details for current weather alerts.

2

View weather information at your destination.

Note: You can view weather information at any other

location by tapping the map and then the Weather icon.

3

Display weather on the map as you drive.

4

Select from a variety of weather types.

5

Slide to adjust the transparency of the overlay on the map.

Note: Use the slider to readjust for visibility when

switching between day and night modes.

4

5

1

3

2

14

The Rand McNally Dock enables you to receive software upgrades and access map updates, construction updates, and additional

features. Simply download the Dock software for your PC or Mac at www.randmcnally.com/dock and connect your device

using the USB cable provided.

With the Rand McNally Dock, you can also:

• Upload custom POIs, such as red light cameras and railroad crossings, to your device

• Download the User Manual

• Access the Rand McNally support site and online store

• Read product news and announcements

• Send feedback and suggestions to Rand McNally through “Tell Rand”

For a detailed description of the features of your device, please see the RVND

™

7715 User Manual. The User Manual can be

downloaded from the Rand McNally Dock, and is also available at www.randmcnally.com/support.

More Information

Rand McNally Dock

15

Warnings, End-User License Agreement, and Warranty

Pay attention to road conditions and street signs, and obey all trafﬁc and safety laws. Trafﬁc laws and current trafﬁc conditions must always be observed and take precedence over the instructions

issued by the Rand McNally navigation system. The User should be aware of situations where current trafﬁc conditions and the instructions from the navigation system may be in conﬂict. Some states prohibit

the use of windshield mounts and may otherwise restrict the usage of navigation and other electronic devices in the vehicle. It is the User’s responsibility to ensure compliance with all laws and regulations. The

use of the navigation system does not relieve the User of his/her responsibilities. The User is ultimately responsible for the vehicle under his/her control and should be aware of the surroundings at all times.

If after reading these statements the User decides not to accept these terms, the User should not use the navigation system.

Rand McNally hereby grants you (“User”) a single-user non-exclusive, non-transferable license to use the Rand McNally navigation system (hereinafter referred to as the “Product” (including software and

associated data)) for User’s own internal business or personal use and not for resale, sublicense or commercial use.

This Product and the software incorporated in it and related documentation are furnished under license and may be used only in accordance with this license. Except as permitted by such license, the contents

of this Product and software may not be disclosed to third parties, copied or duplicated in any form, in whole or in part, without the prior written permission of Rand McNally. This Product and software contain

proprietary and conﬁdential information of Rand McNally and its licensors. Rand McNally grants User a limited license for use of this Product and the software incorporated in the Product for its normal

operation. By using the Product, User acknowledges that the content of this document and the Product are the property of Rand McNally and its licensors and are protected by U.S. copyright, trademark and

patent laws and international treaties.

THE USER MAY NOT:

•UsetheProductonanetworkorleserver,time-sharingortoprocessdataforotherpersons.

•UsetheProducttocreateanyroutingtables,les,databasesorothercompendiums.

•Copy,loanorotherwisetransferorsublicensetheProduct,itssoftwareorcontent.

•Modify,oradapttheProductinanyway,ordecompile,disassemble,reverseengineerorreducetohumanreadableformtheProductandsoftwareincorporatedtherein.

•Alter,removeorobscureanycopyrightnotice,trademarknotice,orproprietarylegendfromtheProduct,itssoftwareorcontent.

This license will terminate automatically if User fails to comply with any of the terms of this license and User agrees to stop using the Product. Rand McNally may revise or update the Product and is not

obligated to furnish any revisions or updates to User.

Warranty: Please retain your original sales receipt for warranty service.

Rand McNally warrants that the Product, and the component parts thereof, will be free of defects in workmanship and materials for a period of one (1) year from the date of ﬁrst consumer purchase.

This warranty may be enforced by the ﬁrst consumer purchaser, provided that the product is utilized within the U.S.A. or Canada.

Rand McNally will, without charge, repair or replace (with a new or newly reconditioned unit), at its option, defective Products or component parts. For repair or replacement of defective Products, User must

contact Rand McNally at 1-800-333-0136 for return authorization and instructions. User will be required to provide proof of the date of ﬁrst consumer purchase, such as a duplicated copy of a sales receipt. The

consumer must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Rand McNally’s expense, if the Product is repaired or replaced under warranty.

Repairs or replacements have a 90-day warranty. If the unit sent in is still under its original warranty, then the new warranty is 90 days or to the end of the original one (1) year warranty, depending on which is longer.

This warranty gives the consumer speciﬁc rights, and he or she may also have other rights which vary from state to state.

16

Exclusions: This limited warranty does not apply: 1) to any product damaged by accident; 2) in the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs; 3) if the serial

number has been altered, defaced or removed; or 4) if the owner of the product resides outside of the U.S.A. or Canada.

Caution: Rand McNally makes no warranty as to the accuracy or completeness of the information in the Product and disclaims any and all express, implied or statutory warranties,

including any implied warranty of merchantability or ﬁtness for a particular purpose. It is the user’s responsibility to use this product prudently. This product is intended to be used

only as a travel aid and must not be used for any purpose requiring precise measurement of direction, distance, location or topography.

RAND MCNALLY AND ITS LICENSORS DO NOT MAKE ANY OTHER WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT, INCLUDING ANY WARRANTY AS TO

QUALITY, PERFORMANCE, TITLE OR NON-INFRINGEMENT. IN NO EVENT WILL RAND MCNALLY OR ITS LICENSORS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to

some consumers.

The User agrees to allow User-provided information to Rand McNally to be used for internal business evaluation purposes, including, but not limited to, evaluating the effectiveness of the services provided,

methods to simplify or improve User experiences. Such information will not be used by third parties or in any way that discloses the identity of the User.

Rand McNally may make use of third party software in the Product. Notwithstanding the terms and conditions of this license, use of some third party materials included in the Product may be subject to other

terms and conditions. The ofﬁcial third party copyright notices are provided at the end of this License.

The User agrees to indemnify, defend and hold Rand McNally and its licensors (including their respective licensors, suppliers, assignees, subsidiaries, afﬁliated companies, and the respective ofﬁcers, directors,

employees, shareholders, agents and representatives of each of them) free and harmless from and against any liability, loss, injury (including injuries resulting in death), demand, action, cost, expense or claim of

any kind or character, including but not limited to attorney’s fees, arising out of or in connection with any use or possession by the User of this Product.

These terms and conditions constitute the entire agreement between Rand McNally (and its licensors and suppliers) and the User pertaining to the subject matter hereof, and supersedes in their entirety any

and all written or oral agreements previously existing between us with respect to such subject matter.

The above terms and conditions shall be governed by the laws of the Illinois, without giving effect to (i) its conﬂict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is

explicitly excluded. The User agrees to submit to the jurisdiction of Illinois for any and all disputes, claims and actions arising from or in connection with the Data provided to the User hereunder.

User shall not export the Product in violation of any U.S. or foreign laws. Rand McNally’s licensors shall be third party beneﬁciaries of Rand McNally’s rights under this license, but are not parties hereto and

have no obligations hereunder.

By using this product you agree to be bound both by the foregoing and to the terms of use found at www.randmcnally.com/RVGPS.

Restricted Rights Legend. For governmental agencies: Use, reproduction or disclosure is subject to restrictions set forth in subparagraph (c) (1) (iii) of the Right in Technical Data and Computer Software clause

at DFARS 52.227-7013, as amended.

The term Wi-Fi

®

is a registered trademark of the Wi-Fi Alliance

®

.

17

Guide de Démarrage Rapide

18

Rand McNally Dock: maintenez votre appareil à jour en téléchargeant le logiciel Rand McNally Dock sur votre ordinateur person-

nel à l'adresse www.randmcnally.com/dock puis en connectant votre appareil à l'aide du câble USB fourni.

Pour en savoir plus: utilisez votre appareil pour consulter Didacticiel et conseils sous Préférences > Général aﬁn d'obtenir plus

d'informations, ou bien rendez-vous à l'adresse www.randmcnally.com/support pour télécharger le manuel d'utilisateur.

Bouton d'Alimentation: maintenez le bouton d'alimentation orange appuyé pour mettre l'appareil sous ou hors tension.

Ce bouton peut également être utilisé pour accéder rapidement à certaines fonctionnalités lorsque l'appareil est sous tension.

Consultez Préférences > Général > Appui rapide sur le bouton d'alimentation pour découvrir les options. Un voyant rouge

indique que la batterie est en cours de chargement; un voyant vert indique que celle-ci est complètement chargée.

Reset: utilisez le bouton de reset à l'arrière de l'appareil pour redémarrer celui-ci. L'itinéraire actuel est annulé, mais les

préférences, le carnet d'adresses et toute autre donnée personnelle seront enregistrés.

Informations importantes concernant votre RVND

™

7715

19

Installation du support

Remarque: Suivez toutes les réglementations locales en vigueur régissant le placement de la monture.

1. Sélectionnez une zone avec une vue dégagée du ciel et des satellites GPS pour assurer la transmission

correcte des informations.

2. Nettoyez et séchez la zone de ﬁxation.

3. Retirez le ﬁlm de protection de la ventouse.

4. Ajustez l'inclinaison du support à l'aide de la vis de serrage.

5. Tirez le levier de la ventouse vers le haut pour dégager celle-ci.

6. Branchez le cordon d'alimentation dans l'appareil et dans la source d'alimentation de 12 volts du véhicule.

7. Faites glisser l'appareil sur le support.

8. Maintenez la ventouse de la monture sur la surface de ﬁxation.

9. Baissez le levier de la ventouse jusqu'à ce que celle-ci soit engagée.

10. Ajustez l'appareil pour qu'il soit bien visible et ne perturbe pas le champ de vision du conducteur.

La page est en cours de chargement...

Rand McNally RVND 7715 Guide de démarrage rapide

Rand McNally RVND 7715 Guide de démarrage rapide

dans d''autres langues

Documents connexes