Ariston FK 996E C X Mode d'emploi

Catégorie
Fours
Taper
Mode d'emploi

Ce manuel convient également à

FK 89E X
FK 996ESC X
FK 89E
FK 996ESC
FK 996E C X
OVEN
Contents
Installation, 2-3
Positioning
Electrical connection
Technical data
Description of the appliance, 4
Overall view
Control panel
Display
Start-up and use, 5-6
Control panel lock
Setting the clock
Setting the minute minder
Starting the oven
Restoring the factory settings
Standby
Modes, 7-10
Manual cooking modes
Automatic cooking modes
Programming cooking
Practical cooking advice
Cooking advice table
Precautions and tips, 11
General safety
Disposal
Respecting and conserving the environment
Care and maintenance, 12-13
Switching the appliance off
Cleaning the appliance
Cleaning the oven door
Replacing the light bulb
Assembling the sliding rack kit
Troubleshooting, 14
Assistance, 15
Operating Instructions
Français, 16 Espanol, 31
Portuges, 46
English,1
GB FR ES
PT
AR
GB
2
GB
Ventilation
To ensure adequate ventilation is provided, the back
panel of the cabinet must be removed. It is
advisable to install the oven so that it rests on two
strips of wood, or on a completely flat surface with
an opening of at least 45 x 560 mm (see figures).
Centring and fixing
Secure the appliance to the cabinet:
Open the oven door.
Remove the 2 rubber plugs covering the fixing
holes on the perimeter frame.
Fix the oven to the cabinet using the 2 wood
screws.
Replace the rubber plugs.
! All parts which ensure the safe operation of the
appliance must not be removable without the aid of
a tool.
! Please keep this instruction booklet in a safe place
for future reference. If the appliance is sold, given
away or moved, please make sure the booklet is
also passed on to the new owners so that they may
benefit from the advice contained within it.
! Please read this instruction manual carefully: it
contains important information concerning the safe
operation, installation and maintenance of the appliance.
Positioning
! Do not let children play with the packaging
material; it should be disposed of in accordance
with local separated waste collection standards (see
Precautions and tips).
! The appliance must be installed by a qualified
professional in accordance with the instructions
provided. Incorrect installation may damage
property or cause harm to people or animals.
Built-in appliance
Use an appropriate cabinet to ensure that the
appliance operates properly:
The panels adjacent to the oven must be made of
heat-resistant material.
Cabinets with a veneer exterior must be
assembled with glues which can withstand
temperatures of up to 100°C.
to install the oven under the counter (see diagram)
or in a kitchen unit, the cabinet must have the
following dimensions:
* Stainless steel models only
! The appliance must not come into contact with
electrical parts once it has been installed.
The indications for consumption given on the data
plate have been calculated for this type of
installation.
Installation
560 mm.
45 mm.
590 mm.
595 mm.
22,5 mm.*
20,5 mm.
550 mm.
570 mm.
20 mm.
575-585 mm.
45 mm.
560 mm.
550 mm.
min.
3
GB
Electrical connection
! Ovens equipped with a three-pole power supply
cable are designed to operate with alternating
current at the voltage and frequency indicated on
the data plate located on the appliance (see below).
Fitting the power supply cable
1. Open the terminal
board by inserting a
screwdriver into the
side tabs of the cover.
Use the screwdriver as
a lever by pushing it
down to open the cover
(see diagram).
2. Install the power
supply cable by
loosening the cable
clamp screw and the
three wire contact
screws L-N-
.
Connect the wires to the
corresponding
terminals: the Blue wire
to the terminal marked
(N), the Brown wire to
the terminal marked (L)
and the Yellow/Green wire to the terminal marked
(see diagram).
3. Secure the cable by fastening the clamp screw.
4. Close the cover of the terminal board.
Connecting the electricity supply cable to the
mains
Install a standardised plug corresponding to the
load indicated on the data plate (see table).
The appliance must be directly connected to the
mains using an omnipolar switch with a minimum
contact opening of 3 mm installed between the
appliance and the mains. The switch must be
suitable for the charge indicated and must comply
with current electrical regulations (the earthing wire
must not be interrupted by the switch). The supply
cable must be positioned so that it does not come
into contact with temperatures higher than 50°C at
any point (the back panel of the oven, for example).
! The installer must ensure that the correct electrical
connection has been performed and that it is fully
compliant with safety regulations.
Before connecting the appliance to the power
supply, make sure that:
the appliance is earthed and the plug is compliant
with the law;
the socket can withstand the maximum power of
the appliance, which is indicated on the data
plate (see below);
the voltage is in the range between the values
indicated on the data plate (see below);
the socket is compatible with the plug of the
appliance. If the socket is incompatible with the
plug, ask an authorised technician to replace it.
Do not use extension cords or multiple sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be
easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced
by authorised technicians only (see Assistance).
!
The manufacturer declines any liability shouldThe manufacturer declines any liability should
The manufacturer declines any liability shouldThe manufacturer declines any liability should
The manufacturer declines any liability should
these safety measures not be observed.these safety measures not be observed.
these safety measures not be observed.these safety measures not be observed.
these safety measures not be observed.
N
L
* Without removable guide rails
APPLIANCE SPECIFICATIONS
Dimensions
width 43.5 cm
height 32 cm
depth 41.5 cm
Volume
58 l
Electrical
connections
voltage: 220 - 240 V~ 50/60 Hz
(see data plate)
maximum power absorbed
2800 W
ENERGY
LABEL*
Directive 2002/40/EC on the label
of electric ovens. Standard EN 50304
Declared energy consumption
for Forced convection Class –
heating mode:
ECO.
4
GB
Control panel
GRILL
DRIPPING PAN
GUIDES for the
sliding racks
position 5
position 4
position 3
position 2
position 1
Description of
the appliance
Overall view
Control panel
Display
SELECTOR
knob
THERMOSTAT /
TIMER
knob
DISPLAY
TIMER
icon
MINUTE MINDER
icon
CONTROL PANEL LOCK
icon
LIGHT
icon
CONTROL
PANEL
POWER BUTTON
START /
STOP
TEMPERATURE and TIME
numerical digits
END OF COOKING
icon
CLOCK
icon
DURATION
icon
MINUTE MINDER
icon
Preheating /
Residual heat
indicator
CONTROL
PANEL LOCK
indicator
MODE
icons
5
GB
! The first time you use your appliance, heat the
empty oven with its door closed at its maximum
temperature for at least half an hour. Ensure that the
room is well ventilated before switching the oven off
and opening the oven door. The appliance may emit
a slightly unpleasant odour caused by protective
substances used during the manufacturing process
burning away.
! To make the setting process easier, keep the knob
in position: this will increase the scrolling speed of
the numbers on the display.
! Each setting will automatically be stored in the
appliance memory after 10 seconds.
! The touch controls cannot be activated if the user
is wearing gloves.
Some models are equipped with a system of hinges
which allows the door to close slowly, without the
user having to follow the movement through with his/
her hand. To use the system correctly, before
closing the door:
Open the door fully.
Do not force the closing movement manually.
Control panel lock
! The control panel can be locked while the oven is
off, once cooking has started or finished and during
programming.
To lock the oven controls, press and hold the
button for at least 2 seconds. A buzzer sounds and
the display shows the key symbol “n—O”. The
icon, when lit, indicate lock function activation.
To deactivate the lock, press and hold the
button again for at least 2 seconds.
Setting the clock
! The clock can only be set when the oven is
switched off. If the oven is in standby mode,
pressing the button once will display the current
time setting. Press it again to set the time.
After connection to the power supply network or after
a blackout, the
button and the digits on the
display will flash for 10 seconds.
To set the clock:
1. Press button
.
2. Turn the TIMER knob towards “+” and “-” to
adjust the hour value.
3. Once you have reached the correct hour value,
press the
button.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset the
clock. If the
icon flashes on the display, this
indicates that the clock has not been set correctly.
Setting the minute minder
! The minute minder may still be set whether the
oven is switched on or off. It does not switch the
oven on or off.
When the set time has elapsed, the timer emits a
buzzer that will automatically stop after 30 seconds
or when any active button on the control panel is
pressed.
To adjust the timer proceed as follows:
1. Press button
.
2. Adjust the time as desired by turning the TIMER
knob towards “+” and “-”.
3. Once you have reached the desired value, press
the
button again.
The lit
symbol will remind you that the minute
minder is on. The DISPLAY will show the countdown.
To cancel the minute minder, press the
button
and use the knob to set the time to 00:00. Press
button
again.
The
icon will switch off to indicate that the
minute minder has been disabled.
Starting the oven
1. Switch the control panel on by pressing the
button. The appliance buzzer sounds three times
(ascending) and all buttons light up in sequence.
2. Select the desired cooking mode by turning the
SELECTOR knob. The display shows:
- the temperature associated with the mode, if
programming manually;
- “Auto” and the duration alternately, if programming
is automatic.
3. Press the
button to begin cooking.
4. The oven will begin its preheating phase, the
preheating indicators will light up as the temperature
rises.
5. When the preheating process has finished, a
buzzer sounds and all the preheating indicator lights
show that this stage has been completed: the food
can then be placed in the oven.
6. During cooking it is always possible to:
- modify the temperature by turning the
Start-up and use
6
GB
THERMOSTAT knob (manual modes only);
- set the duration of a cooking mode (see Cooking
Modes);
- press the
button to stop cooking. In this case
the appliance stores the temperature modified
previously in its memory (manual modes only);
- switch off the oven by pressing the
button for
3 seconds.
7. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance
will reactivate the cooking mode from the point at
which it was interrupted, provided that the
temperature has not dropped below a certain level.
Programmed cooking modes which have not yet
started will not be restored and must be
reprogrammed (for example: a cooking mode has
been programmed to start at 20:30. At 19:30 a
blackout occurs. When the power supply is restored,
the mode will have to be reprogrammed).
! There is no preheating stage for the GRILL mode.
! Never put objects directly on the bottom of the
oven; this will prevent the enamel coating from being
damaged.
! Always place cookware on the rack(s) provided.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between
the control panel and the oven door, as well as
towards the bottom of the oven door.In the FAST
COOKING mode, the fan is activated automatically
after ten minutes.
! Once cooking has been completed, the cooling fan
continues to operate until the oven has cooled down
sufficiently.
Oven light
The light comes on when the oven door is opened or
when a cooking mode starts.
When models featuring LED INSIDE technology
begin cooking, the LEDs on the door light up for
improved illumination of all cooking levels.
The
button can be used to switch on the light at
any time.
Residual heat indicators
The appliance is fitted with a residual heat indicator.
When the oven is off, the “residual heat” bar on the
display lights up to indicate high temperatures
inside the oven cavity. The individual segments of
the bar switch off one by one as the temperature
inside the oven falls.
Restoring the factory settings
The oven factory settings can be restored to reset all
selections made by the user (clock and customised
durations). To carry out a reset, switch off the oven,
then keep the SELECTOR knob turned while
pressing the
button for 6 seconds. Once the
restore procedure is complete, a buzzer will sound.
The first time the
button is pressed, the oven will
behave as if it is being switched on for the first time.
Standby
This product complies with the requirements of the
latest European Directive on the limitation of power
consumption of the standby mode. If no buttons are
pressed for 30 minutes and the control panel/door
lock has not been activated, the appliance
automatically reverts to standby mode. The standby
mode is visualised by the high luminosity “Watch
Icon”. As soon as interaction with the machine
resumes, the system’s operating mode is restored.
7
GB
! In order to guarantee wonderfully soft and crunchy
foodstuffs, the oven releases – in the form of water
vapour - the humidity naturally withheld in the food
itself. In this way, optimal cooking results can be
achieved for all types of food.
! Every time the oven is switched on, it suggests the
first manual cooking mode.
Manual cooking modes
! All cooking modes have a default cooking
temperature which may be adjusted manually to a
value between 30°C and 250°C as desired (300°C for
GRILL mode). Any temperature adjustments will be
stored in the appliance memory and suggested
again the next time this mode is used. If the
selected temperature is higher than the temperature
inside the oven, the text “Hot” appears on the
display. However, it will still be possible to start
cooking.
MULTILEVEL mode
Since the heat remains constant throughout the
oven, the air cooks and browns food in a uniform
manner. A maximum of two racks may be used at
the same time.
GRILL mode
The top heating element and the rotisserie spit
(where present) are activated. The high and direct
temperature of the grill is recommended for food
which requires a high surface temperature. Always
cook in this mode with the oven door closed (see
“Practical cooking advice”).
FAN GRILLING mode
The top heating element and the rotisserie spit
(where present) are activated and the fan begins to
operate. During part of the cycle the circular heating
element is also activated. This combination of
features increases the effectiveness of the
unidirectional thermal radiation provided by the
heating elements through the forced circulation of
the air throughout the oven.
This helps prevent food from burning on the surface
and allows the heat to penetrate right into the food.
Always cook in this mode with the oven door closed
(see “Practical cooking advice”).
FAST COOKING mode
This mode is particularly suitable for cooking pre-
packed food quickly (frozen or pre-cooked). The
best results are achieved using one cooking rack
only.
LOW TEMPERATURE modes
This type of cooking can be used for proving,
defrosting, preparing yoghurt, heating dishes at the
required speed and slow cooking at low
temperatures. The temperature options are: 40, 65
and 90°C.
BAKING mode
The rear heating element and the fan are switched
on, thus guaranteeing the distribution of heat in a
delicate and uniform manner throughout the entire
oven. This mode is ideal for baking temperature
sensitive foods (such as cakes, which need to rise).
PIZZA mode
The top and circular heating elements switch on and
the fan begins to operate. This combination heats
the oven rapidly. If you use more than one rack at a
time, switch the position of the dishes halfway
through the cooking process.
ECO mode
The rear heating element and the fan are switched on,
thus guaranteeing the distribution of heat in a delicate
and uniform manner throughout the entire oven.This
energy saving mode is recommended for small
dishes, ideal for heating foods and finishing off
cooking.
Rotisserie (only available in certain models)
To operate the
rotisserie function (see
diagram) proceed as
follows:
1. Place the dripping
pan in position 1.
2. Place the rotisserie
support in position 3
and insert the spit in
the hole provided on
the back panel of the
oven.
3. Start the rotisserie using the SELECTOR knob to
select mode
or .
When modes
or are activated, the
rotisserie will stop if the door is opened.
Modes
8
GB
Automatic cooking modes
! The temperature and the cooking duration are
pre-set values, guaranteeing a perfect result every
time - automatically. These values are set using the
C.O.P.® (Programmed Optimal Cooking) system.
The cooking cycle stops automatically and the oven
indicates when the dish is cooked. You may start
cooking whether the oven has been preheated or
not. The cooking duration can be customised
according to personal taste by modifying the relevant
value - before cooking begins - by ±5/20 minutes
depending on the selected programme. The duration
can however be modified even once cooking has
begun. If the value is modified before the programme
begins, it is stored in the memory and suggested
again by the appliance when the programme is next
used. If the temperature inside the oven is higher
than the suggested value for the selected mode, the
text “Hot” appears on the display and it will not be
possible to begin cooking; wait for the oven to cool.
! When the cooking stage has been reached, the
oven buzzer sounds.
! Do not open the oven door as this will disrupt the
cooking time and temperature.
BAKED CAKES mode
This function is ideal for cooking desserts which are
made using natural yeast, baking powder and
desserts which contain no yeast. Place the dish in
the oven while it is still cold. The dish may also be
placed in a preheated oven.
BREAD mode
Use this function to bake bread. To obtain the best
results, we recommend that you carefully observe
the instructions below:
follow the recipe;
do not exceed the maximum weight of the
dripping pan;
remember to pour 50 g (0,5 dl) of cold water
into the baking tray in position 5.
The dough must be left to rise at room
temperature for 1 – 1 ½ hours (depending on the
room temperature) or until the dough has doubled
in size.
Recipe for BREAD:
1 Dripping pan holding 1000 g Max, lower level
2 Dripping pans each holding 1000 g Max, medium
and lower levels
Recipe for 1000 g of dough: 600 g flour, 360 g
water, 11g salt, 25 g fresh yeast (or 2 sachets of
powder yeast)
Method:
Mix the flour and salt in a large bowl.
Dilute the yeast in lukewarm water (approximately
35 degrees).
Make a small well in the mound of flour.
Pour in the water and yeast mixture.
Knead the dough by stretching and folding it over
itself with the palm of your hand for 10 minutes
until it has a uniform consistency and is not too
sticky.
Form the dough into a ball shape, place it in a
large bowl and cover it with transparent plastic
wrap to prevent the surface of the dough from
drying out. Select the manual LOW
TEMPERATURE function on the oven and set the
temperature to 40°C. Place the bowl inside and
leave the dough to rise for approximately 1 hour
(the dough should double in volume).
Cut the dough into equal sized loaves.
Place them in the dripping pan, on a sheet of
baking paper.
Dust the loaves with flour.
Make incisions on the loaves.
Place the food inside the oven while it is still cold.
Start the
BREAD cooking mode.
Once baked, leave the loaves on one of the grill
racks until they have cooled completely.
9
GB
Programming cooking
! A cooking mode must be selected before
programming can take place.
Programming the cooking duration
1. Press the
button until the icon and the
numerical digits on the display begin to flash.
2. Turn the TIMER knob towards “+” and “-” to
adjust the time as desired; keep the knob in position
to scroll through the numbers more quickly and
make the setting process easier.
3. Once you have reached the desired duration,
press the
button again. The display will show
the duration and set temperature alternately.
4. Press the
button to begin cooking.
5. When cooking has finished, “END” appears on the
display and a buzzer sounds.
For example: it is 9:00 a.m. and a duration of 1
hour and 15 minutes is programmed. The
programme will stop automatically at 10:15 a.m.
Setting the end time for a cooking mode
! A cooking duration must be set before the cooking
end time can be scheduled.
! For the delayed programming to work properly, the
clock should be set to the correct time.
1. Follow steps 1 to 3 to set the duration as detailed
above.
2. Press the
button twice: the icon and the
numerical digits on the display will begin to flash.
3. Turn the TIMER knob towards “+” and “-” to
adjust the cooking end time value.
4. Once you have reached the desired end time,
press the
button again. The display will show
the duration, the cooking end time and the set
temperature alternately.
5. Press the
button to activate the programmed
mode.
Programming has been set when the
and
buttons are illuminated. The DISPLAY shows the
cooking end time and the cooking duration
alternately.
6. Once cooking has finished, “END” appears on the
display and a buzzer sounds.
For example: it is 9:00 a.m. and a time of 1 hour
and 15 minutes is programmed, while the end
time is set to 12:30. The programme will start
automatically at 11:15 a.m.
To cancel programming press the
button.
Practical cooking advice
! Do not place racks in position 1 and 5 during fan-
assisted cooking. This is because excessive direct
heat can burn temperature sensitive foods.
! In the GRILL and FAN GRILLING cooking modes,
particularly when using the rotisserie spit, place the
dripping pan in position 1 to collect cooking
residues (fat and/or grease).
MULTILEVEL
Use positions 2 and 4, placing the food which
requires more heat on 2.
Place the dripping pan on the bottom and the rack
on top.
BARBECUE
Place the rack in position 3 or 4. Position the food
in the centre of the rack.
We recommend that the power level is set to
maximum. The top heating element is regulated
by a thermostat and may not always operate
constantly.
PIZZA OVEN
Use a lightweight aluminium pizza pan. Place it on
the rack provided.
For a crispy crust, do not use the dripping pan as
this extends the total cooking duration and
prevents the crust from forming.
If the pizza has a lot of toppings, we recommend
adding the mozzarella cheese to the top of the
pizza halfway through the cooking process.
10
GB
Modes Foods Weight
(Kg)
Preheating
Manual
standard
guide rails
sliding
guide rails
Multilevel*
Pizza on 2 racks
Pies on two racks/cakes on 2 racks
Sponge cake on 2 racks (on the dripping pan)
Roast chicken + potatoes
Lamb
Mackerel
Lasagne
Cream puffs on 3 racks
Biscuits on 3 racks
Cheese puffs on 2 racks
Savoury pies
1+1
1
1
1
2 and 4
2 and 4
2 and 4
1 and 2/3
2
1 or 2
2
2 and 4
1 and 3
1 and 3
1 and 3
1 and 3
1 and 3
1
1
1
1 and 3
1 and 3
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
20-25
30-35
20-25
65-75
45-50
30-35
35-40
20-25
10-20
20-25
20-30
Grill*
Mackerel
Sole and cuttlefish
Squid and prawn kebabs
Cod fillet
Grilled vegetables
Veal steak
Sausages
Hamburgers
Toasted sandwiches (or toast)
Spit-roast chicken using rotisserie spit (where present)
Spit-roast lamb using rotisserie spit (where present)
1
0,7
0,7
0,7
0,5
0,8
0,7
n° 4 or 5
n° 4 or 6
1
1
4
4
4
4
3 or 4
4
4
4
4
-
-
3
3
3
3
2 or 3
3
3
3
3
-
-
no
no
no
no
no
no
no
no
no
no
no
300
300
300
300
300
300
300
300
300
300
300
15-20
10-15
8-10
10-15
15-20
15-20
15-20
10-12
3-5
70-80
70-80
Fan grilling*
Grilled chicken
Cuttlefish
Spit-roast chicken using rotisserie spit (where present)
Spit-roast duck using rotisserie spit (where present)
Roast veal or beef
Roast pork
Lamb
1,5
1
1,5
1,5
1
1
1
2
2
-
-
2
2
2
2
2
-
-
2
2
2
no
no
no
no
no
no
no
210
200
210
210
210
210
210
55-60
30-35
70-80
60-70
60-75
70-80
40-45
Fast cooking*
Frozen food
Pizza
Courgette and prawn pie
Country style spinach pie
Turnovers
Lasagne
Golden rolls
Chicken bites
0.3
0.4
0.5
0.3
0.5
0.4
0.4
2
2
2
2
2
2
2
1
1
1
1
1
1
1
-
-
-
-
-
-
-
250
200
220
200
200
180
220
12
20
30-35
25
35
25-30
15-20
Pre-cooked food
Golden chicken wings
0.4 2 1 - 200 20-25
Fresh Food
Biscuits (shortcrust pastry)
Sponge cake made with yoghurt
Cheese puffs
0.3
0.6
0.2
2
2
2
1
1
1
-
-
-
200
180
210
15-18
45
10-12
Low
temperature*
Duck
Chicken
Roast veal or beef
Roast pork
Biscuits (shortcrust pastry)
Tarts
1,5
1,5
1
1
-
1
2
2
2
2
2
2
1
1
1
1
1
1
yes
yes
yes
yes
yes
yes
200-210
200-210
200
200-210
180
180
70-80
60-70
70-75
70-80
15-20
30-35
Baking*
Tarts
Fruit cakes
Sponge cake made with yoghurt
Small cakes on 2 racks
Sponge cake
Cream puffs on 3 racks
Biscuits on 3 racks
Filled pancakes
Meringues on 3 racks
Cheese puffs
0,5
1
0,7
0,7
0,6
0,7
0,7
0,8
0,5
0,5
2 or 3
2 or 3
2 or 3
2 and 4
2 or 3
1, 3 and 5
1, 3 and 5
2
1, 3 and 5
2
1 or 2
1 or 2
1 or 2
1 and 3
1 or 2
1, 2 and 4
1, 2 and 4
1
1, 2 and 4
1
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
180
180
170-180
180-190
160-170
180-190
180
200
90
210
25-35
40-50
45-55
20-25
30-40
20-25
20-25
30-35
180
20-25
Pizza*
Pizza
Focaccia bread
0,5
0,5
2
2
1
1
yes
yes
15-20
20-25
Automatic**
Baked cakes
Baked cakes 1 2 or 3 2 no
Bread***
Bread (see recipe) 1 1 or 2 1 no
* The cooking times listed above are intended as guidelines only and may be modified according to personal tastes. Oven preheating times are set as
standard and may not be modified manually.
** The duration of the automatic cooking functions are set by default. The values can be modified by the user, starting with the default duration.
*** As stated in the recipe, pour 50 g (0,5 dl) water into the dripping pan in position 5.
! ECO programme: This programme – which has longer cooking times but guarantees sensible energy saving – is recommended for dishes such as fish
fillets, small pastries and ve
g
etables. It is also suitable for warmin
g
foodstuffs and for completin
g
cookin
g
.
Cooking advice table
Rack position Recommended
Temperature
(°C)
Cooking
duration
(minutes)
1 and 3 and 5
1 and 3 and 5
1 and 2 and 4
1 and 2 and 4
210-220
190-200
210-220
180
160-170
200-210
190-200
180
180-190
190
180
210
190-200
11
GB
Precautions and tips
! This appliance has been designed and
manufactured in compliance with international safety
standards. The following warnings are provided for
safety reasons and must be read carefully.
General safety
The appliance was designed for domestic use
inside the home and is not intended for
commercial or industrial use.
The appliance must not be installed outdoors, even
in covered areas. It is extremely dangerous to
leave the appliance exposed to rain and storms.
When moving or positioning the appliance, always
use the handles provided on the sides of the
oven.
Do not touch the appliance while barefoot or with
wet or damp hands and feet.
The appliance must be used by adults only for
the preparation of food, in accordance with the
instructions provided in this booklet. Any other
use of the appliance (e.g. for heating the room)
constitutes improper use and is dangerous.
The manufacturer may not be held responsible
for any damage caused as a result of improper,
incorrect and unreasonable use of the
appliance.
Do not touch the heating elements or certain
parts of the oven door when the appliance is in
use; these parts become extremely hot. Keep
children well away from the appliance.
Make sure that the power supply cables of other
electrical appliances do not come into contact
with the hot parts of the oven.
The ventilation and heat dispersal openings must
never be obstructed.
Always grip the oven door handle in the centre:
the ends may be hot.
Always use oven gloves when placing cookware
in the oven or when removing it.
Do not use aluminium foil to line the bottom of the
oven.
Do not place flammable materials in the oven: if
the appliance is switched on accidentally, the
materials could catch fire.
Always make sure the knobs are in the “”/“
position when the appliance is not in use.
When unplugging the appliance, always pull the plug
from the mains socket; do not pull on the cable.
Do not perform any cleaning or maintenance work
without having disconnected the appliance from
the electricity mains.
If the event of malfunctions, under no
circumstances should you attempt to perform the
repairs yourself. Contact an authorised Service
Centre (see Assistance).
Do not rest objects on the open oven door.
The appliance should not be operated by people
(including children) with reduced physical,
sensory or mental capacities, by inexperienced
individuals or by anyone who is not familiar with
the product. These individuals should, at the very
least, be supervised by someone who assumes
responsibility for their safety or receive
preliminary instructions relating to the operation of
the appliance.
Do not let children play with the appliance.
Disposal
When disposing of packaging material: observe
local legislation so that the packaging may be
reused.
The European Directive 2002/96/EC relating to
Waste Electrical and Electronic Equipment
(WEEE) states that household appliances should
not be disposed of using the normal solid urban
waste cycle. Exhausted appliances should be
collected separately in order to optimise the cost
of re-using and recycling the materials inside the
machine, while preventing potential damage to
the atmosphere and to public health. The
crossed-out dustbin is marked on all products to
remind the owner of their obligations regarding
separated waste collection.
For further information relating to the correct
disposal of exhausted household appliances,
owners may contact the relevant public service or
their local dealer.
Respecting and conserving the
environment
You can help to reduce the peak load of the
electricity supply network companies by using the
oven in the hours between late afternoon and the
early hours of the morning. The cooking mode
programming options, the “delayed cooking”
mode (see Cooking modes) and “delayed
automatic cleaning” mode (see Care and
Maintenance) in particular, enable the user to
organise their time efficiently.
Always keep the oven door closed when using the
GRILL and FAN GRILLING modes: this will
achieve improved results while saving energy
(approximately 10%).
Check the door seals regularly and wipe them
clean to ensure they are free of debris so that
they adhere properly to the door, thus avoiding
the dispersal of heat.
!
This product complies with the requirements of the
latest European Directive on the limitation of power
consumption of the standby mode.
12
GB
Care and maintenance
Switching the appliance off
Disconnect your appliance from the electricity
supply before carrying out any work on it.
Cleaning the appliance
Slight differences in colour on the front of the oven
are due to the different materials used, i.e. glass,
plastic or metal.
Any shady areas resembling grooves on the oven
door glass are caused by reflections from the
oven light.
The enamel is branded at very high temperatures.
This process may cause colour variations. This is
normal and will not affect appliance operation in
any way. The thin edges of the sheet metal
cannot be entirely enamelled and may therefore
appear to be unfinished. This will not affect the
rust protection.
The stainless steel or enamel-coated external
parts and the rubber seals may be cleaned using
a sponge that has been soaked in lukewarm water
and neutral soap. Use specialised products for
the removal of stubborn stains. After cleaning,
rinse and dry thoroughly. Do not use abrasive
powders or corrosive substances.
The inside of the oven should ideally be cleaned
after each use, while it is still lukewarm. Use hot
water and detergent, then rinse well and dry with
a soft cloth. Do not use abrasive products.
All accessories - with the exception of the sliding
racks - can be washed like everyday crockery,
and are even dishwasher safe.
We recommend that detergents are not sprayed
directly onto the control panel, but that a sponge
is used instead.
! Never use steam cleaners or pressure cleaners on
the appliance.
Cleaning the oven door
! The door of LED INSIDE models cannot be
removed.
Clean the glass part of the oven door using a
sponge and a non-abrasive cleaning product, then
dry thoroughly with a soft cloth. Do not use rough
abrasive material or sharp metal scrapers as these
could scratch the surface and cause the glass to
crack.
For more thorough cleaning purposes, the oven door
may be removed:
1. Open the oven door fully (see diagram).
2. Use a screwdriver to lift up and turn the small
levers
FF
FF
F located on the two hinges (see diagram).
3. Grip the door on the two
outer sides and close it
approximately half way. Pull
the door towards you, lifting it
out of its slot (see diagram).
To replace the door, reverse
this sequence.
Inspecting the seals
Check the door seals around the oven regularly. If
the seals are damaged, please contact your nearest
Service Centre (see Assistance). We recommend
that the oven is not used until the seals have been
replaced.
Replacing the light bulb
To replace the
oven light bulb:
1. Remove the
glass cover of the
lamp-holder.
2. Remove the
light bulb and
replace it with a
similar one:
halogen lamp
voltage 230 V,
wattage 25 W, cap G 9.
3. Replace the glass cover (see diagram).
! Do not touch the light bulb directly with your
hands.
Sliding rack kit assembly
To assemble the
sliding racks:
1. Remove the two
frames, lifting them
away from the spacers
A (see figure).
A
F
Glass cover
Lamp
Lamp Holder
compartment
13
GB
D
2. Choose which shelf
to use with the sliding
rack. Paying attention
to the direction in which
the sliding rack is to be
extracted, position joint
B and then joint C on
the frame.
3. Secure the two
frames with the guide
rails using the holes
provided on the oven
walls (see diagram).
The holes for the left
frame are situated at
the top, while the holes
for the right frame are
at the bottom.
4. Finally, fit the frames on the spacers A.
! Do not place the sliding racks in position 5.
B
C
Left
guide rail
Right guide
rail
Direction
of extraction
14
GB
Troubleshooting
Problem Possible cause Solution
The appliance has just been
connected to the electricity
mains or there has been a blacko
u
Set the clock.
A programmed cooking mode
does not start.
There has been a blackout. Reprogram the cooking mode.
Only the high luminosity
“Clock button” is lit.
The appliance is in standby mode Press any button to exit
standby mode.
An automatic mode has been
selected. “Hot” appears on the
dis
p
la
y
and cookin
g
does not star
t
The temperature inside the oven
is higher than the suggested valu
e
for the selected mode.
Wait for the oven to cool down.
Fan-assisted cooking has been
selected and the food looks burnt.
Positions 1 and 5: the direct
heat could cause
temperature-sensitive
foods to burn.
We recommend switching
dripping pan positions halfway
through cooking.
The “Clock button” and the
digits on the display flash.
15
GB
Warning:
The appliance is fitted with an automatic diagnostic system which detects any malfunctions. Malfunctions are
signalled through messages of the following type: “F”, followed by numbers.
Call for technical assistance in the event of a malfunction.
Before calling for Assistance:
Check whether you can fix the problem yourself.
Restart the programme to check whether the malfunction has disappeared.
If it has not, contact the Authorised Technical Assistance Service.
! Never use the services of an unauthorised technician.
Please have the following information to hand:
The type of problem encountered.
The message displayed.
The appliance model (Mod.).
The serial number (S/N).
The latter two pieces of information can be found on the data plate located on the appliance.
Assistance
FOUR
Sommaire
Installation, 17-18
Positionnement
Raccordement électrique
Caractéristiques techniques
Description de l’appareil, 19
Vue d’ensemble
Tableau de bord
Afficheur
Mise en marche et utilisation, 20-21
Verrouillage de commandes
Régler l’horloge
Régler le minuteur
Mise en marche du four
Rétablissement des réglages d’usine
Standby
Programmes, 22-25
Programmes de cuisson manuels
Programmes de cuisson automatiques
Comment programmer une cuisson
Conseils de cuisson
Tableau de cuisson
Précautions et conseils, 26
Sécurité générale
Mise au rebut
Economie et respect de l’environnement
Nettoyage et entretien, 27-28
Mise hors tension
Nettoyage de l’appareil
Nettoyage de la porte
Remplacement de l’ampoule d’éclairage
Montage du Kit glissières coulissantes
Anomalies et remèdes, 29
Assistance, 30
Mode d’emploi
FK 89E X
FK 996ESC X
FK 89E
FK 996ESC
FK 996E C X
Français, 16 Espanol, 31
Portuges, 46
English,1
FR
GB ES
PT AR
FR
FR
17
Les déclarations de consommation indiquées sur
l’étiquette des caractéristiques ont été mesurées
pour ce type d’installation
!Important : conserver ce mode d’emploi pour
pouvoir le consulter à tout moment. En cas de vente,
de cession ou de déménagement, veiller à ce qu’il
suive l’appareil pour informer le nouveau propriétaire
sur son fonctionnement et lui fournir les conseils
correspondants.
! Lire attentivement les instructions : elles
contiennent des conseils importants sur l’installation,
l’utilisation et la sécurité de cet appareil.
Positionnement
! Les emballages ne sont pas des jouets pour
enfants, il faut les mettre au rebut en respectant la
réglementation sur le tri sélectif des déchets (voir
Précautions et conseils).
! L’installation doit être effectuée par un
professionnel du secteur conformément aux
instructions du fabricant. Une mauvaise installation
peut causer des dommages à des personnes, des
animaux ou des biens.
Encastrement
Pour garantir le bon fonctionnement de l’appareil, il
faut que le meuble possède des caractéristiques
bien précises :
les panneaux adjacents doivent être fabriqués
dans un matériau résistant à la chaleur ;
dans le cas de meubles en plaqués bois, les
colles doivent pouvoir résister à une température
de 100 °C ;
la cavité du meuble pour encastrement du four,
tant sous plan (voir figure) qu’en colonne, doit
avoir les dimensions suivantes :
* Seulement pour modèles inox
! Après encastrement de l’appareil, il ne doit plus y
avoir possibilité de contact avec les parties
électrifiées.
Installation
560 mm.
45 mm.
590 mm.
595 mm.
22,5 mm.*
20,5 mm.
550 mm.
570 mm.
20 mm.
575-585 mm.
45 mm.
560 mm.
550 mm.
min.
Aération
Afin de garantir une bonne aération, la cavité
d’encastrement doit être dépourvue de paroi arrière.
Il est conseillé d’installer le four de manière à ce
qu’il repose sur deux cales en bois ou bien sur un
plan d’appui continu qui ait une découpe d’au moins
45 x 560 mm (voir figures).
Centrage et fixation
Pour fixer l’appareil au meuble :
ouvrir la porte du four;
Retirer les 2 caoutchouc qui couvrent les trous de
fixation situés sur le cadre;
Fixer le four au meuble en utilisant 2 vis à bois
Repositionner les caoutchouc couvre-trous.
! Toutes les parties qui servent de protection doivent
être fixées de manière à ne pouvoir être enlevées
qu’avec l’aide d’un outil.
18
FR
Raccordement électrique
! Les fours munis d’un câble d’alimentation tripolaire
sont prévus pour un fonctionnement au courant
alternatif à la tension et à la fréquence indiquées sur
la plaque signalétique apposée sur l’appareil (voir
ci-dessous).
Montage du câble d’alimentation
1. Pour ouvrir le bornier,
faire pression à l’aide
d’un tournevis sur les
languettes latérales du
couvercle : tirer et ouvrir
le couvercle (voir
figure).
2. Montage du câble
d’alimentation :
dévisser la vis du serre-
câble ainsi que les trois
vis des contacts L-N-
puis fixer les fils
sous les têtes de vis en
respectant les couleurs
Bleu (N) Marron (L)
Jaune-Vert
(voir
figure).
3. Fixer le câble dans le
serre-câble prévu.
4. Fermer le couvercle
du bornier.
Branchement du câble d’alimentation au réseau
électrique
Monter sur le câble une prise normalisée pour la
charge indiquée sur l’étiquette des caractéristiques
(voir ci-contre).
En cas de raccordement direct au réseau, il faut
intercaler entre l’appareil et le réseau un interrupteur
à coupure omnipolaire ayant au moins 3 mm
d’écartement entre les contacts, dimensionné à la
charge et conforme aux normes en vigueur (le fil de
terre ne doit pas être interrompu par l’interrupteur).
Le câble d’alimentation ne doit atteindre, en aucun
point, une température dépassant de 50°C la
température ambiante (celle par exemple du
panneau arrière du four).
! L’installateur est responsable du bon raccordement
électrique de l’appareil et du respect des normes de
sécurité.
Avant de procéder au branchement, s’assurer que :
la prise est bien munie d’une terre conforme à la loi ;
la prise est bien apte à supporter la puissance
maximale de l’appareil, indiquée sur la plaque
signalétique (voir ci-dessous) ;
la tension d’alimentation est bien comprise entre
les valeurs indiquées sur la plaque signalétique
(voir ci-dessous) ;
la prise est bien compatible avec la fiche de
l’appareil. Si ce n’est pas le cas, remplacer la
prise ou la fiche, ne pas utiliser de rallonges ni de
prises multiples.
! Après installation de l’appareil, le câble électrique
et la prise de courant doivent être facilement
accessibles.
! Le câble ne doit être ni plié ni excessivement
écrasé.
! Il doit être contrôlé périodiquement et ne peut être
remplacé que par un technicien agréé (voir
Assistance).
!
Nous déclinons toute responsabilité en cas deNous déclinons toute responsabilité en cas de
Nous déclinons toute responsabilité en cas deNous déclinons toute responsabilité en cas de
Nous déclinons toute responsabilité en cas de
non respect des normes énumérées ci-dessus.non respect des normes énumérées ci-dessus.
non respect des normes énumérées ci-dessus.non respect des normes énumérées ci-dessus.
non respect des normes énumérées ci-dessus.
N
L
* Sans glissières télescopiques
PLAQUE SIGNALETIQUE
Dimensions
largeur 43,5 cm
hauteur 32 cm
profondeur 41,5cm
Volume
L. 58
Raccordements
électriques
tension 220-240V~ 50/60Hz
(voir plaque signalétique)
puissance maximum absorbée
2800W
ENERGY
LABEL*
(ETIQUETTE
ENERGIE *)
Directive 2002/40/CE sur l'étiquette
des fours électriques
Norme EN 50304
Consommation énergie déclaration
Classe convection Forcée –
fonction four: ECO.
Cet appareil est conforme aux
Directives Communautaires
suivantes : 2006/95/CEE du
12.12.06 (Basse Tension) et
modifications successives -
2004/108/CEE du 15.12.04
(Compatibilité Électromagnétique)
et modifications successives -
93/68/CEE du 22/07/93 et
modifications successives.
- 2002/96/CE et modifications
successives.
- 1275/2008 standby/off mode
FR
19
Tableau de bord
Support GRILLE
Support LECHEFRITE
GLISSIERES de
coulissement
niveau 5
niveau 4
niveau 3
niveau 2
niveau 1
Description de
l’appareil
Vue d’ensemble
Tableau de bord
Afficheur
Bouton
PROGRAMMES
Bouton
THERMOSTAT/
SÉLECTION TEMPS
AFFICHEUR
Icône
SÉLECTION
TEMPS
Icône
MINUTEUR
Icône
VERROUILLAGE COMMANDES
Icône
ECLAIRAGE
ALLUMAGE
PANNEAU
DÉPART /
ARRÊT
Chiffres TEMP
É
RATURE
et TEMPS
Icône
FIN CUISSON
Icône
HORLOGE
Icône
DURÉE
Icône
MINUTEUR
Indicateur de
Préchauffage /
Chaleur résiduelle
Voyant
CLAVIER VERROUILLÉ
Icônes
PROGRAMMES
20
FR
! Lors de son premier allumage, faire fonctionner le
four à vide, porte fermée, pendant au moins une
heure en réglant le thermostat sur le maximum. Puis
éteindre le four, ouvrir la porte et aérer la pièce.
L’odeur qui se dégage est due à l’évaporation des
produits utilisés pour protéger le four.
! Pour simplifier les sélections, garder le bouton en
place : les chiffres défilent plus rapidement.
! Chaque sélection est automatiquement mémorisée
pendant 10 secondes.
! Quand on porte les gants, il est impossible
d'actionner les touches.
Certains modèles sont équipés d’un système de
charnières qui permet à la porte de se fermer
lentement sans devoir l’accompagner avec la main.
Pour une bonne utilisation, avant de fermer :
ouvrir complètement la porte.
éviter de forcer manuellement la fermeture.
Verrouillage de commandes
! Les commandes peuvent être verrouillées four
éteint, cuisson en cours ou terminée ou bien en
programmation.
Pour verrouiller les commandes du four, appuyer sur
la touche
pendant au moins 2 secondes. Un
signal sonore retentit et le symbole clé « n—O »
apparaît sur l’afficheur la icône allumées
indiquent que le verrouillage est activé.
Pour déverrouiller, appuyer à nouveau sur la touche
pendant au moins 2 secondes.
Régler l’horloge
! L’horloge n’est réglable que four éteint. Si le four
est en mode veille (standby), une première pression
sur la touche affiche l’heure courante. Appuyer à
nouveau pour régler l’heure.
Après branchement au secteur ou après
une panne de courant, la touche
et les chiffres
de l’afficheur se mettent à clignoter pendant 10
secondes.
Pour régler l’horloge :
1. Appuyer sur la touche
.
2. tourner le bouton SÉLECTION TEMPS pour
l’amener sur « + » ou « - » et régler l’heure.
3. Une fois l’heure exacte atteinte, appuyer à
nouveau sur la touche
.
4. procéder comme sus-indiqué pour les minutes
aussi.
En cas de panne de courant, il faut remettre
l’horloge à l’heure. L’icône
qui clignote sur
l’afficheur signale que l’horloge a besoin d’être
réglée.
Régler le minuteur
! Le minuteur est toujours réglable tant four éteint
que four allumé. Il ne contrôle pas l’allumage et
l’arrêt du four.
Une fois le temps écoulé, le minuteur émet un signal
sonore qui s’arrête automatiquement au bout de 30
secondes ou après avoir appuyé sur une touche
active quelconque.
Pour régler la minuterie :
1. Appuyer sur la touche
.
2. Régler la durée désirée en tournant le bouton
SÉLECTION TEMPS sur « + » ou « - » .
3. Une fois la sélection voulue atteinte, appuyer à
nouveau sur la touche
.
L’icône
allumée signale que le minuteur est
activé. L’AFFICHEUR affiche le décompte.
Pour annuler la sélection de la minuterie, appuyer
sur la touche
et à l’aide du bouton ramener le
temps à 00:00. Appuyer à nouveau sur la touche
.
L’icône
éteinte signale que le minuteur est
désactivé.
Mise en marche du four
1. Appuyer sur la touche pour allumer le
panneau de commande. L’appareil émet un triple
son ascendant et toutes les touches s’allument à la
suite.
2. Pour sélectionner le programme de cuisson
souhaité, tourner le bouton PROGRAMMES. L’écran
affiche :
- en cas de programme manuel, la température
associée au programme ;
- en alternance « Auto » et la durée en cas de
programme automatique.
3. Appuyer sur la touche
pour démarrer la
cuisson.
4. Le four se place en préchauffage, les indicateurs
de montée en température s’éclairent
progressivement au fur et à mesure que la
température augmente.
5. Un signal sonore suivi de l’allumage de tous les
indicateurs de préchauffage signale la fin du
Mise en marche et
utilisation
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76

Ariston FK 996E C X Mode d'emploi

Catégorie
Fours
Taper
Mode d'emploi
Ce manuel convient également à