ASROCK Fatal1ty B450 Manuel utilisateur

Version 1.0

Published June 2018

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or

translated in any language, in any form or by any means, except duplication of

documentation by the purchaser for backup purpose, without written consent of

ASRock Inc.

Products and corporate names appearing in this documentation may or may not

be registered trademarks or copyrights of their respective companies, and are used

only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for

informational use only and subject to change without notice, and should not be

constructed as a commitment by ASRock. ASRock assumes no responsibility for

any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide

warranty of any kind, either expressed or implied, including but not limited to

the implied warranties or conditions of merchantability or tness for a particular

purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for

any indirect, special, incidental, or consequential damages (including damages for

loss of prots, loss of business, loss of data, interruption of business and the like),

even if ASRock has been advised of the possibility of such damages arising from any

defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance

controlled in Perchlorate Best Management Practices (BMP) regulations passed by the

California Legislature. When you discard the Lithium battery in California, USA, please

follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/

perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer

Law. You are entitled to a replacement or refund for a major failure and compensation for

any other reasonably foreseeable loss or damage caused by our goods. You are also entitled

to have the goods repaired or replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure. If you require assistance please call ASRock Tel

: +886-2-28965588 ext.123 (Standard International call charges apply)

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI

logo are trademarks or registered trademarks of HDMI Licensing LLC in the United

States and other countries.

CE Warning

is device complies with directive 2014/53/EU issued by the Commision of the European

Community.

is equipment complies with EU radiation exposure limits set forth for an uncontrolled

environment.

is equipment should be installed and operated with minimum distance 20cm between

the radiator & your body.

Operations in the 5.15-5.35GHz band are restricted to indoor usage only.

Radio transmit power per transceiver type

Function Frequency Maximum Output Power (EIRP)

WiFi

2400-2483.5 MHz 18.5 + / -1.5 dbm

5150-5250 MHz 21.5 + / -1.5 dbm

5250-5350 MHz

18.5 + / -1.5 dbm (no TPC)

21.5 + / -1.5 dbm (TPC)

5470-5725 MHz

25.5 + / -1.5 dbm (no TPC)

28.5 + / -1.5 dbm (TPC)

Bluetooth 2400-2483.5 MHz 8.5 + / -1.5 dbm

Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually

played competitive billiards in professional tournaments and won four or ve games o guys

who played at the highest level. I actually thought of making a career of it, but at that young

age situations change rapidly. Because I’ve been blessed with great hand-eye coordination and

a grasp of mathematics (an important element in video gaming) I gravitated to that activity.

GOING PRO

I started professional gaming in 1999 when I entered the CPL (Cyberathlete Professional

League) tournament in Dallas and won $4,000 for coming in third place. Emerging as one

of the top players in the United States, a company interested in sponsoring me ew me to

Sweden to compete against the top 12 players in the world. I won 18 straight games, lost

none, and took rst place, becoming the number one ranked Quake III player in the world

in the process. Two months later I followed that success by traveling to Dallas and defending

my title as the world’s best Quake III player, winning the $40,000 grand prize. From there

I entered competitions all over the world, including Singapore, Korea, Germany, Australia,

Holland and Brazil in addition to Los Angeles, New York and St. Louis.

WINNING STREAK

I was excited to showcase my true gaming skills when defending my title as CPL

Champion of the year at the CPL Winter 2001 because I would be competing in a totally

dierent rst person shooter (fps) game, Alien vs. Predator II. I won that competition and

walked away with a new car. e next year I won the same title playing Unreal Tournament

2003, becoming the only three-time CPL champion of the year. And I did it playing a

different game each year, something no one else has ever done and a feat of which I am

extremely proud.

At QuakeCon 2002, I faced o against my rival ZeRo4 in one of the most highly

anticipated matches of the year, winning in a 14 to (-1) killer victory. Competing at Quakecon

2004, I became the World’s 1st Doom3 Champion by defeating Daler in a series of very

challenging matches and earning $25,000 for the victory.

Since then Fatal1ty has traveled the globe to compete against the best in the world, winning

prizes and acclaim, including the 2005 CPL World Tour Championship in New York City for

a $150,000 rst place triumph. In August 2007, Johnathan was awarded the rst ever Lifetime

Achievement Award in the four year history of the eSports-Award for “showing exceptional

sportsmanship, taking part in shaping eSports into what it is today and for being the prime

representative of this young sport. He has become the gurehead for eSports worldwide”.

Fatal1ty Story

LIVIN’ LARGE

Since my rst big tournament wins, I have been a “Professional Cyberathlete”, traveling the

world and livin’ large with lots of International media coverage on outlets such as MTV,

ESPN and a 60 Minutes segment on CBS to name only a few. It's unreal - it's crazy. I’m living

a dream by playing video games for a living. I’ve always been athletic and took sports like

hockey and football very seriously, working out and training hard. is discipline helps me

become a better gamer and my drive to be the best has opened the doors necessary to become

a professional.

A DREAM

Now, another dream is being realized – building the ultimate gaming computer, made

up of the best parts under my own brand. Quality hardware makes a huge difference in

competitions…a couple more frames per second and everything gets really nice. It’s all about

getting the computer processing faster and allowing more uid movement around the maps.

My vision for Fatal1ty hardware is to allow gamers to focus on the game without worrying

about their equipment, something I’ve preached since I began competing. I don’t want to

worry about my equipment. I want to be there – over and done with - so I can focus on

the game. I want it to be the fastest and most stable computer equipment on the face of the

planet, so quality is what Fatal1ty Brand products represent.

Johnathan “Fatal1ty” Wendel

e Fatal1ty name, Fatal1ty logos and the Fatal1ty likeness are registered trademarks of Fatal1ty, Inc., and are used

owners.

1

English

Fatal1ty B450 Gaming-ITX/ac Series

Motherboard Layout

BIO S

ROM

ATXPWR1

CLR CMO S1

1

USB _3_ 4

HD_ AUD IO 1

1

CPU _FA N1

RJ-45 LAN

SOCKET AM4

DISPL AY1

ATX1 2V 1

Ultra M.2

PCIe Gen3 x4

USB3 _3_4

1

CHA _FA N2/ WP

HDLE D RE SET

PLED P WRB TN

PANE L1

1

RoHS

DDR4_A1 (64 bit, 288-pin module)

DDR4_B1 (64 bit, 288-pin module)

AMD

Promontory

B450

USB 3.1 Ge n1

T: US B1

B: USB2

AMD _FAN _LE D1

1

LPC 1

1

B450 Gaming-ITX/ac

PCIE1

CHA _FA N1 /WP

USB 3.1 Ge n2

T: US B31 _TA _1

B: USB 31 _TC _1

USB 2.0

T: USB1

B: USB2

PS2

Keyb oar d

/Mou se

HDMI1

Top:

Central/Bass

Cent er:

REAR SP K

Top:

LINE IN

Cent er:

FRON T

Bott om:

Opti cal

SPDI F

Bott om:

MIC I N

USB _5

1

SPE AKE R1

1

M2_WIFI_1

SATA3 _2

SATA3 _4

SATA3 _1

SATA3 _3

1

ADD R_L ED1

Top Side View

English

2

Ultra M.2

Back Side View

3

English

Fatal1ty B450 Gaming-ITX/ac Series

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 Addressable LED Header (ADDR_LED1)

3 AMD LED Fan USB Header (USB_5)

4 AMD Fan LED Header (AMD_FAN_LED1)

5 CPU Fan Connector (CPU_FAN1)

6 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

7 Chassis/Water Pump Fan Connector (CHA_FAN2/WP)

8 ATX Power Connector (ATXPWR1)

9 USB 2.0 Header (USB_3_4)

10 USB 3.1 Gen1 Header (USB3_3_4)

11 SATA3 Connector (SATA3_2)

12 SATA3 Connector (SATA3_1)

13 SATA3 Connector (SATA3_3)

14 SATA3 Connector (SATA3_4)

15 System Panel Header (PANEL1)

16 LPC Header (LPC1)

17 Clear CMOS Jumper (CLRCMOS1)

18 Chassis/Water Pump Fan Connector (CHA_FAN1/WP)

19 Chassis Speaker Header (SPEAKER1)

20 Front Panel Audio Header (HD_AUDIO1)

English

4

I/O Panel

No. Description No. Description

1 Fatal1ty Mouse Port (USB_1) 9 Antenna Ports

2 USB 2.0 Port (USB_2) 10 Microphone (Pink)

3 USB 3.1 Gen2 Type-A Port (USB31_TA_1) 11 Optical SPDIF Out Port

4 LAN RJ-45 Port* 12 USB 3.1 Gen1 Ports (USB3_12)

5 Central / Bass (Orange) 13 USB 3.1 Gen2 Type-C Port (USB31_TC_1)

6 Rear Speaker (Black) 14 HDMI Port

7 Line In (Light Blue) 15 DisplayPort 1.2

8 Front Speaker (Lime)** 16 PS/2 Mouse/Keyboard Port

9

101112131516

6

5

8

7

43

2

1

14

5

English

Fatal1ty B450 Gaming-ITX/ac Series

* ere are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection

Blinking Data Activity Orange 100Mbps connection

On Link Green 1Gbps connection

** If you use a 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below

for connection details in accordance with the type of speaker you use.

Audio Output

Channels

Front Speaker

(No. 8)

Rear Speaker

(No. 6)

Central / Bass

(No. 5)

Line In

(No. 7)

2 V -- -- --

4 V V -- --

6 V V V --

8 V V V V

ACT/LINK LED

SPEED LED

LAN Port

English

6

WiFi-802.11ac Module and ASRock WiFi 2.4/5 GHz Antennas

WiFi-802.11ac + BT Module

is motherboard comes with an exclusive WiFi 802.11 a/b/g/n/ac + BT v4.2

module (pre-installed on the rear I/O panel) that oers support for WiFi 802.11 a/b/

g/n/ac connectivity standards and Bluetooth v4.2. WiFi + BT module is an easy-to-

use wireless local area network (WLAN) adapter to support WiFi + BT. Bluetooth

v4.2 standard features Smart Ready technology that adds a whole new class of

functionality into the mobile devices. BT 4.2 also includes Low Energy Technology

and ensures extraordinary low power consumption for PCs.

* e transmission speed may vary according to the environment.

7

English

Fatal1ty B450 Gaming-ITX/ac Series

WiFi Antennas Installation Guide

Step 1

Prepare the WiFi 2.4/5 GHz Antennas that come

with the package.

Step 2

Connect the two WiFi 2.4/5 GHz Antennas to

the antenna connectors. Turn the antenna clock-

wise until it is securely connected.

Step 3

Set the WiFi 2.4/5 GHz Antenna as shown in the

illustration.

*You may need to adjust the direction of

the antenna for a stronger signal.

English

8

Chapter 1 Introduction

ank you for purchasing ASRock Fatal1ty B450 Gaming-ITX/ac Series

motherboard, a reliable motherboard produced under ASRock’s consistently

stringent quality control. It delivers excellent performance with robust design

conforming to ASRock’s commitment to quality and endurance.

1.1 Package Contents

•

ASRock Fatal1ty B450 Gaming-ITX/ac Series Motherboard (Mini-ITX Form Factor)

•

ASRock Fatal1ty B450 Gaming-ITX/ac Series Quick Installation Guide

•

ASRock Fatal1ty B450 Gaming-ITX/ac Series Support CD

•

1 x I/O Panel Shield

•

2 x Serial ATA (SATA) Data Cables (Optional)

•

2 x ASRock WiFi 2.4/5 GHz Antennas (Optional)

•

1 x Screw for M.2 Socket (Optional)

Because the motherboard specications and the BIOS soware might be updated, the

content of this manual will be subject to change without notice. In case any modica-

tions of this manual occur, the updated version will be available on ASRock’s website

without further notice. If you require technical support related to this motherboard,

please visit our website for specic information about the model you are using. You

may nd the latest VGA cards and CPU support list on ASRock’s website as well.

ASRock website http://www.asrock.com.

9

English

Fatal1ty B450 Gaming-ITX/ac Series

1.2 Specications

Platform

•

Mini-ITX Form Factor

•

2oz Copper PCB

CPU

•

AMD AM4 Socket

•

Digi Power design

•

8 Power Phase design

•

Supports 105W Water Cooling (Pinnacle Ridge); Supports

95W Water Cooling (Summit Ridge); Supports 65W Water

Cooling (Raven Ridge)

Chipset

•

AMD Promontory B450

Memory

•

Dual Channel DDR4 Memory Technology

•

2 x DDR4 DIMM Slots

•

AMD Ryzen series CPUs (Pinnacle Ridge) support DDR4

3466+(OC)/3200(OC)/2933/2667/2400/2133 ECC & non-

ECC, un-buered memory*

•

AMD Ryzen series CPUs (Summit Ridge) support DDR4

3466+(OC)/3200(OC)/2933(OC)/2667/2400/2133 ECC &

non-ECC, un-buered memory*

•

AMD Ryzen series CPUs (Raven Ridge) support DDR4

3466+(OC)/3200(OC)/2933(OC)/2667/2400/2133 non-ECC,

un-buered memory*

* For Ryzen Series CPUs (Raven Ridge), ECC is only supported

with PRO CPUs.

* Please refer to Memory Support List on ASRock’s website for

more information. (http://www.asrock.com/)

* Please refer to page 26 for DDR4 UDIMM maximum frequency

support.

•

Max. capacity of system memory: 32GB

•

15μ Gold Contact in DIMM Slots

Expansion

Slot

AMD Ryzen series CPUs (Summit Ridge and Pinnacle Ridge)

•

1 x PCI Express 3.0 x16 Slot (PCIE1: x16 mode)*

AMD Ryzen series CPUs (Raven Ridge)

•

1 x PCI Express 3.0 x16 Slot (PCIE1: x8 mode)*

English

10

* Supports PCIe riser cards to extend one x16 slot to two x8 slots

if you install AMD Ryzen series CPUs

* Supports NVMe SSD as boot disks

•

1 x Vertical M.2 Socket (Key E) with the bundled WiFi-

802.11ac module (on the rear I/O)

•

15μ Gold Contact in VGA PCIe Slot (PCIE1)

Graphics

•

Integrated AMD Radeon

TM

Vega Series Graphics in Ryzen

Series APU*

* Actual support may vary by CPU

•

DirectX 12, Pixel Shader 5.0

•

Max. shared memory 2GB

•

Dual graphics output: Support HDMI and DisplayPort 1.2 by

independent display controllers

•

Supports HDMI with max. resolution up to 4K x 2K

(4096x2160) @ 60Hz

•

Supports DisplayPort 1.2 with max. resolution up to 4K x 2K

(4096x2160) @ 60Hz

•

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

HBR (High Bit Rate Audio) with HDMI Ports (Compliant

HDMI monitor is required)

•

Supports HDCP with HDMI and DisplayPort 1.2 Ports

•

Supports 4K Ultra HD (UHD) playback with HDMI and

DisplayPort 1.2 Ports

Audio

•

7.1 CH HD Audio with Content Protection (Realtek ALC1220

Audio Codec)

•

Premium Blu-ray Audio support

•

Supports Surge Protection

•

Nichicon Fine Gold Series Audio Caps

•

120dB SNR DAC with Dierential Amplier

•

Pure Power-In

•

Direct Drive Technology

•

PCB Isolate Shielding

•

Impedance Sensing on Line Out port

•

Individual PCB Layers for R/L Audio Channel

•

Gold Audio Jacks

•

Supports Creative SoundBlaster Cinema5

11

English

Fatal1ty B450 Gaming-ITX/ac Series

LAN

•

Gigabit LAN 10/100/1000 Mb/s

•

GigaLAN Intel® I211AT

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

Wireless

LAN

•

Intel® 802.11ac WiFi Module

•

Supports IEEE 802.11a/b/g/n/ac

•

Supports Dual-Band (2.4/5 GHz)

•

Supports high speed wireless connections up to 433Mbps

•

Supports Bluetooth 4.2 / 3.0 + High speed class II

Rear Panel

I/O

•

2 x Antenna Ports

•

1 x PS/2 Mouse/Keyboard Port

•

1 x HDMI Port

•

1 x DisplayPort 1.2

•

1 x Optical SPDIF Out Port

•

2 x USB 2.0 Ports (Supports ESD Protection)

* 1 x Fatal1ty Mouse Port (USB 2.0) is included

•

1 x USB 3.1 Gen2 Type-A Port (10 Gb/s) (Supports ESD Pro-

tection)

•

1 x USB 3.1 Gen2 Type-C Port (10 Gb/s) (Supports ESD Pro-

tection)

•

2 x USB 3.1 Gen1 Ports (Supports ESD Protection)

•

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

LED)

•

HD Audio Jacks: Rear Speaker / Central / Bass / Line in /

Front Speaker / Microphone (Gold Audio Jacks)

Storage

•

4 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,

RAID 1 and RAID 10), NCQ, AHCI and Hot Plug

•

1 x Ultra M.2 Socket, supports M Key type 2280 M.2 SATA3

6.0 Gb/s module and M.2 PCI Express module up to Gen3

x4 (32 Gb/s) (with Summit Ridge, Raven Ridge and Pinnacle

Ridge)*

* Supports NVMe SSD as boot disks

English

12

Connector

•

1 x LPC Header

•

1 x Addressable LED Header

* Supports in total up to 5V/3A, 15W LED Strip

•

1 x AMD Fan LED Header

* e AMD Fan LED Header supports LED strips of maximum

load of 3A (36W) and length up to 2.5M.

•

1 x CPU Fan Connector (4-pin)

* e CPU Fan Connector supports the CPU fan of maximum

1A (12W) fan power.

•

2 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan

Speed Control)

* e Chassis/Water Pump Fan supports the water cooler fan of

maximum 2A (24W) fan power.

* CHA_FAN1/WP and CHA_FAN2/WP can auto detect if 3-pin

or 4-pin fan is in use.

•

1 x 24 pin ATX Power Connector

•

1 x 8 pin 12V Power Connector (Hi-Density Power

Connector)

•

1 x Front Panel Audio Connector (15μ Gold Audio

Connector)

•

1 x AMD LED Fan USB Header

•

1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports ESD

Protection)

•

1 x USB 3.1 Gen1 Header (Supports 2 USB 3.1 Gen1 ports)

(Supports ESD Protection)

BIOS

Feature

•

AMI UEFI Legal BIOS with GUI support

•

Supports “Plug and Play”

•

ACPI 5.1 compliance wake up events

•

Supports jumperfree

•

SMBIOS 2.3 support

•

CPU, DRAM, PCH 1.05V, PROM 2.5V, Voltage Multi-adjust-

ment

Hardware

Monitor

•

Temperature Sensing: CPU, Chassis/Water Pump Fans

•

Fan Tachometer: CPU, Chassis/Water Pump Fans

•

Quiet Fan (Auto adjust chassis fan speed by CPU tempera-

ture): CPU, Chassis/Water Pump Fans

•

Fan Multi-Speed Control: CPU, Chassis/Water Pump Fans

•

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore

13

English

Fatal1ty B450 Gaming-ITX/ac Series

OS

•

Microso® Windows® 10 64-bit

Certica-

tions

•

FCC, CE

•

ErP/EuP ready (ErP/EuP ready power supply is required)

* For detailed product information, please visit our website:

http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including adjust-

ing the setting in the BIOS, applying Untied Overclocking Technology, or using third-

party overclocking tools. Overclocking may aect your system’s stability, or even cause

damage to the components and devices of your system. It should be done at your own

risk and expense. We are not responsible for possible damage caused by overclocking.

English

14

is is a Mini-ITX form factor motherboard. Before you install the motherboard,

study the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

•

Make sure to unplug the power cord before installing or removing the motherboard.

Failure to do so may cause physical injuries to you and damages to motherboard

components.

•

In order to avoid damage from static electricity to the motherboard’s components,

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

•

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

in the bag that comes with the components.

•

When placing screws to secure the motherboard to the chassis, please do not over-

tighten the screws! Doing so may damage the motherboard.

Chapter 2 Installation

La page est en cours de chargement...

ASROCK Fatal1ty B450 Manuel utilisateur

Ce manuel convient également à

ASROCK Fatal1ty B450 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents