Zhejiang Uniview Technologies 0235C54W Mode d'emploi

Marque: Zhejiang Uniview Technologies

Modèle: 0235C54W

Taper: Mode d'emploi

Smart Wireless Cube Cameras

Quick Guide

V1.00

1 Packing List

Contact your local dealer if the package is damaged or incomplete. The attachments

may vary with models, please see the actual model for details.

No.

Name

Qty

Unit

Camera

PCS

Power adapter

PCS

Screw components（1）

Set

Mount accessory （2）

Set

User manual

Set

Remarks:

* means optional and supplied with certain models only.

(1)Including one or more accessories such as screws and hex key.

(2)Including one or more items from drilling template, bracket adapter, anti-static

gloves, etc.

2 Safety Instructions

Installation and removal of the unit and its accessories must be carried out by

qualified personnel. You must read all of the safety instructions before installation

and operation.

 Contact professionals for maintenance information. Do not attempt to dismantle

the device by yourself. We shall not assume any responsibility for problems

caused by unauthorized repair or maintenance.

 If there is dust on the front glass surface, remove the dust gently using an oil-

free brush or a rubber dust blowing ball.

 If there is grease or a dust stain on the front glass surface, clean the glass surface

gently from the center outward using anti-static gloves or an oil-free cloth. If the

grease or the stain still remains, use anti-static gloves or an oil-free cloth dipped

with detergent and clean the glass surface gently until it is clean.

 Do not use organic solvents (such as benzene and alcohol) to clean the

transparent dome cover.

3 Appearance

The following figure shows device dimensions. The appearance may vary with device

model.

77mm

(3.0")

125mm

(4.9")

42mm

(1.7")

Φ83mm

Φ(3.3")

77mm

(3.0")

Microphone

Indicator

Lens

Micro SD card slot

NOTE!

Use the reset button to restore factory defaults. When the camera is operating,

press and hold the reset button for at least 10 seconds, and wait for the camera to

restart. Factory default settings are restored when the camera is restarted.

Speaker

Adjustable bracket

RESET button

Power interface

Network interface

NOTE!

Use the adjustable bracket to adjust monitoring direction.

4 Mount Your Camera

4.1 (Optional) Insert the Micro SD Card

You need to install a Micro SD card first if you want to save video on an on-board SD

card. Insert the Micro SD card into the side card slot. Before you insert or remove

the Micro SD card, be sure to disconnect power and wait till the camera stops

operation; otherwise, the camera or the Micro SD card may be damaged.

4.2 Wall Mount

The camera base, pre-installed with magnet, attaches to magnetic surfaces. If wall

mounting is adopted, make sure the surface of the wall is flat and clean. Fix the iron

plate to the wall before mounting the camera. The detailed steps are as follows.

1. Fix the provided iron plate to the wall, mark the positions of holes on the plate,

and drill 5.8mm-5.9mm guide holes on the wall according to the positions.

Micro SD card slot

2. Insert the plastic expansion bolts, knock them into the wall with a rubber

hammer, and make sure that they are tightened up.

3. Screw the iron plate to the wall.

4. Attach the camera to the plate.

5 Startup

After you have installed the device, connect one end of the power adapter to power

supply, and then connect the other end to the power interface to start up the device.

6 Access Your Camera

1. Open your Web browser, enter the camera's IP address in the address bar, and

then press Enter. The default IP is 192.168.1.13.

2. In the login page, enter the default username and password (admin/123456),

then click Login.

NOTE!

 DHCP is enabled by default. If a DHCP server is used in your network, your

camera may be assigned an IP address, and you need to use the assigned IP

address to log in.

 You may need to install a plug-in at your first login. Please follow the on-screen

instructions to complete the installation and then open the browser again to

 The default password is intended only for your first login. To ensure security,

please change the password after your first login. You are strongly

recommended to set a strong password of at least nine characters including all

three elements: digits, letters and special characters.

 If the password has been changed, please use the new password to log in.

Disclaimer and Safety Warnings

No part of this manual may be copied, reproduced, translated or distributed in any form by any

means without prior content in writing from Zhejiang Uniview Technologies Co., Ltd (referred to

as Uniview or us hereafter).

The product described in this manual may contain proprietary software owned by Uniview and

its possible licensors. Unless permitted by Uniview and its licensors, no one is allowed to copy,

distribute, modify, abstract, decompile, disassemble, decrypt, reverse engineer, rent, transfer,

or sublicense the software in any form by any means.

Trademark Acknowledgements

are trademarks or registered trademarks of

Uniview.

All other trademarks, products, services and companies in this manual or the product described

in this manual are the property of their respective owners.

Export Compliance Statement

Uniview complies with applicable export control laws and regulations worldwide, including that

of the People's Republic of China and the United States, and abides by relevant regulations

relating to the export, re-export and transfer of hardware, software and technology. Regarding

the product described in this manual, Uniview asks you to fully understand and strictly abide by

the applicable export laws and regulations worldwide.

Privacy Protection Reminder

Uniview complies with appropriate privacy protection laws and is committed to protecting user

privacy. You may want to read our full privacy policy at our website and get to know the ways

we process your personal information. Please be aware, using the product described in this

manual may involve the collection of personal information such as face, fingerprint, license plate

number, email, phone number, GPS. Please abide by your local laws and regulations while using

the product.

About This Manual

 This manual is intended for multiple product models, and the photos, illustrations,

descriptions, etc, in this manual may be different from the actual appearances, functions,

features, etc, of the product.

 This manual is intended for multiple software versions, and the illustrations and descriptions

in this manual may be different from the actual GUI and functions of the software.

 Despite our best efforts, technical or typographical errors may exist in this manual. Uniview

cannot be held responsible for any such errors and reserves the right to change the manual

without prior notice.

 Users are fully responsible for the damages and losses that arise due to improper operation.

 Uniview reserves the right to change any information in this manual without any prior notice

or indication. Due to such reasons as product version upgrade or regulatory requirement of

relevant regions, this manual will be periodically updated.

Disclaimer of Liability

 To the extent allowed by applicable law, in no event will Uniview be liable for any special,

incidental, indirect, consequential damages, nor for any loss of profits, data, and documents.

 The product described in this manual is provided on an "as is" basis. Unless required by

applicable law, this manual is only for informational purpose, and all statements, information,

and recommendations in this manual are presented without warranty of any kind, expressed

or implied, including, but not limited to, merchantability, satisfaction with quality, fitness for

a particular purpose, and noninfringement.

 Users must assume total responsibility and all risks for connecting the product to the Internet,

including, but not limited to, network attack, hacking, and virus. Uniview strongly

recommends that users take all necessary measures to enhance the protection of network,

device, data and personal information. Uniview disclaims any liability related thereto but will

readily provide necessary security related support.

 To the extent not prohibited by applicable law, in no event will Uniview and its employees,

licensors, subsidiary, affiliates be liable for results arising out of using or inability to use the

product or service, including, not limited to, loss of profits and any other commercial

damages or losses, loss of data, procurement of substitute goods or services; property

damage, personal injury, business interruption, loss of business information, or any special,

direct, indirect, incidental, consequential, pecuniary, coverage, exemplary, subsidiary losses,

however caused and on any theory of liability, whether in contract, strict liability or tort

(including negligence or otherwise) in any way out of the use of the product, even if Uniview

has been advised of the possibility of such damages (other than as may be required by

applicable law in cases involving personal injury, incidental or subsidiary damage).

 To the extent allowed by applicable law, in no event shall Uniview’s total liability to you for

all damages for the product described in this manual (other than as may be required by

applicable law in cases involving personal injury) exceed the amount of money that you have

paid for the product.

Network Security

Please take all necessary measures to enhance network security for your device.

The following are necessary measures for the network security of your device:

 Change default password and set strong password: You are strongly recommended to

change the default password after your first login and set a strong password of at least nine

characters including all three elements: digits, letters and special characters.

 Keep firmware up to date: It is recommended that your device is always upgraded to the

latest version for the latest functions and better security. Visit Uniview's official website or

contact your local dealer for the latest firmware.

The following are recommendations for enhancing network security of your device:

 Change password regularly: Change your device password on a regular basis and keep the

password safe. Make sure only the authorized user can log in to the device.

 Enable HTTPS/SSL: Use SSL certificate to encrypt HTTP communications and ensure data

security.

 Enable IP address filtering: Allow access only from the specified IP addresses.

 Minimum port mapping: Configure your router or firewall to open a minimum set of ports

to the WAN and keep only the necessary port mappings. Never set the device as the DMZ

host or configure a full cone NAT.

 Disable the automatic login and save password features: If multiple users have access to

your computer, it is recommended that you disable these features to prevent unauthorized

access.

 Choose username and password discretely: Avoid using the username and password of your

social media, bank, email account, etc, as the username and password of your device, in case

your social media, bank and email account information is leaked.

 Restrict user permissions: If more than one user needs access to your system, make sure

each user is granted only the necessary permissions.

 Disable UPnP: When UPnP is enabled, the router will automatically map internal ports, and

the system will automatically forward port data, which results in the risks of data leakage.

Therefore, it is recommended to disable UPnP if HTTP and TCP port mapping have been

enabled manually on your router.

 SNMP: Disable SNMP if you do not use it. If you do use it, then SNMPv3 is recommended.

 Multicast: Multicast is intended to transmit video to multiple devices. If you do not use this

function, it is recommended you disable multicast on your network.

 Check logs: Check your device logs regularly to detect unauthorized access or abnormal

operations.

 Physical protection: Keep the device in a locked room or cabinet to prevent unauthorized

physical access.

 Isolate video surveillance network: Isolating your video surveillance network with other

service networks helps prevent unauthorized access to devices in your security system from

other service networks.

Learn More

You may also obtain security information under Security Response Center at Uniview's official

website.

Safety Warnings

The device must be installed, serviced and maintained by a trained professional with necessary

safety knowledge and skills. Before you start using the device, please read through this guide

carefully and make sure all applicable requirements are met to avoid danger and loss of property.

Storage, Transportation, and Use

 Store or use the device in a proper environment that meets environmental requirements,

including and not limited to, temperature, humidity, dust, corrosive gases, electromagnetic

radiation, etc.

 Make sure the device is securely installed or placed on a flat surface to prevent falling.

 Unless otherwise specified, do not stack devices.

 Ensure good ventilation in the operating environment. Do not cover the vents on the device.

Allow adequate space for ventilation.

 Protect the device from liquid of any kind.

 Make sure the power supply provides a stable voltage that meets the power requirements

of the device. Make sure the power supply's output power exceeds the total maximum

power of all the connected devices.

 Verify that the device is properly installed before connecting it to power.

 Do not remove the seal from the device body without consulting Uniview first. Do not

attempt to service the product yourself. Contact a trained professional for maintenance.

 Always disconnect the device from power before attempting to move the device.

 Take proper waterproof measures in accordance with requirements before using the device

outdoors.

Power Requirements

 Installation and use of the device must be in strict accordance with your local electrical safety

regulations.

 Use a UL certified power supply that meets LPS requirements if an adapter is used.

 Use the recommended cordset (power cord) in accordance with the specified ratings.

 Only use the power adapter supplied with your device.

 Use a mains socket outlet with a protective earthing (grounding) connection.

 Ground your device properly if the device is intended to be grounded.

Battery Use Caution

 When battery is used, avoid:

 High or low extreme temperatures during use, storage and transportation;

 Extremely low air pressure, or low air pressure at high altitude;

 Battery replacement.

 Use the battery properly. Improper use of the battery such as the following may cause risks

of fire, explosion or leakage of flammable liquid or gas.

 Replace battery with an incorrect type;

 Dispose of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery;

 Dispose the used battery according to your local regulations or the battery manufacturer's

instructions.

Avertissement de l’utilisation de la batterie

 Lorsque utiliser la batterie, évitez:

 Températures extrêmement élevées ou basses pendant l’utilisation, le stockage et le

transport;

 Pression d’air extrêmement basse, ou pression d’air basse à haute altitude;

 Remplacement de la batterie.

 Utilisez la batterie correctement. Mauvaise utilisation de la batterie comme celles

mentionnées ici, peut entraîner des risques d’incendie, d’explosion ou de fuite liquide de gaz

inflammables.

 Remplacer la batterie par un type incorrect;

 Disposer d’une batterie dans le feu ou un four chaud, écraser mécaniquement ou couper

la batterie;

 Disposer la batterie utilisée conformément à vos règlements locaux ou aux instructions du

fabricant de la batterie.

 Personal safety warnings:

 Chemical Burn Hazard. This product contains a coin cell battery. Do not ingest battery. If

the coin cell battery is swallowed, it can cause severe internal burns in just 2 hours and

can lead to death.

 Keep new and used batteries away from children.

 If the battery compartment does not close securely, stop using the product and keep it

away from children.

 If you think batteries might have been swallowed or placed inside any part of the body,

seek immediate medical attention.

 Avertissements de sécurité personnelle:

 Risque de brûlure chimique. Ce produit contient une batterie de cellules. N’ingérer pas la

batterie. Si la batterie de cellule est avalée, elle peut causer de graves brûlures internes

en seulement 2 heures et peut entraîner la mort.

 Gardez les batteries nouvelles ou utilisées à l’écart des enfants.

 Si le compartiment de la batterie ne se ferme pas en toute sécurité, cessez d’utiliser le

produit et gardez-le à l’écart des enfants.

 Si vous pensez que des piles ont pu être avalées ou placées à l’intérieur d’une partie du

corps, consultez immédiatement un médecin.

Regulatory Compliance

FCC Statements

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Compliance Information Statement refer to:

http://en.uniview.com/Support/Download_Center/Product_Installation/Declaration/

Caution: The user is cautioned that changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of

20cm between the radiator and any part of your body.

LVD/EMC Directive

This product complies with the European Low Voltage Directive 2014/35/EU

and EMC Directive 2014/30/EU, 2014/53/EU.

WEEE Directive–2012/19/EU

The product this manual refers to is covered by the Waste Electrical &

Electronic Equipment (WEEE) Directive and must be disposed of in a

responsible manner.

Battery Directive-2013/56/EC

Battery in the product complies with the European Battery Directive

2013/56/EC. For proper recycling, return the battery to your supplier or to a

designated collection point.

Zhejiang Uniview Technologies 0235C54W Mode d'emploi

Marque: Zhejiang Uniview Technologies

Modèle: 0235C54W

Taper: Mode d'emploi

Télécharger le PDF

rapport

dans d''autres langues

English: Zhejiang Uniview Technologies 0235C54W User guide

Documents connexes

Zhejiang Uniview Technologies 0235C5YY Mode d'emploi

Zhejiang Uniview Technologies 0235C54W Mode d'emploi

Zhejiang Uniview Technologies 0235C54W Mode d'emploi

dans d''autres langues

Documents connexes

Autres documents