Legrand 2411D-FW Guide d'installation

Taper
Guide d'installation
Use #8 (5/16", [7.9mm] head size) flat head fastener or equivalent to mount base to surface.
Utiliser une à tête plate de calibre 8 (tête de 7.9mm, 5/16" po.) ou une fixation équivalente pour assujettir le tube
guide-fils et les raccords a la surface de montage.
Use un sujetador de cabeza plana No.8 (tamaño de cabeza: 7.9mm, 5/16" de pulgada) o su equivalente para unir la
canalita y los accesorios a la superficie de montaje.
The Wiremold Company
60 Woodlawn Street
West Hartford, CT 06110
Tel (860) 233-6251 Fax 860-232-2062
©1999 The Wiremold Company
V2418D
V2417D
V2435D
V2411D
41722 299
2400BD Divided Steel
Raceway Fittings
INSTALLATION INSTRUCTIONS
Wiremold Electrical Systems conform to and should be installed and properly
grounded in compliance with requirements of the current National Electrical
Code, Canadian Electrical Code or codes administered by local authorities.
All electrical products may represent possible shock or fire hazard if improper-
ly installed or used. Wiremold electrical products are UL listed. Made for interi-
or use only and should be installed in conformance with current local and/or
the National Electrical Code.
  • Page 1 1

Legrand 2411D-FW Guide d'installation

Taper
Guide d'installation

dans d''autres langues