Maytag Epic MFW9800TQ0 Manuel utilisateur

Marque: Maytag

Modèle: Epic MFW9800TQ0

Catégorie: Machines à laver

Taper: Manuel utilisateur

]VIAYI'AG ®

EPIC

FRONT-LOADING AUTOMATIC

USE & CARE GUIDE

WASHER

LAVADORA

AUTOMATICA DE CARGA

MANUAL DF USO Y CUIDADO

FRONTAL

LAVEUSE

AUTOMATIQUE A CHARGEMENT FRONTAL

GUIDE D'UTILISATION ET D'ENTRETIEN

FOR QUESTIONS ABOUT FEATURES, OPERATION/PERFORMANCE,

PARTS, ACCESSORIES OR SERVICE CAI.I.: 1.800.688.9900

IN CANADA, CAI.I.: 1.800.807.6777

VISIT OUR WEBSITE AT WWW.MAYTAG.COM

IN CANADA, WWW.MAYTAG.CA

SI TIENE PREGUNTAS RESPECTO A I.AS CARACTERiSTICAS,

FUNCIONAMIENTO, RENDIMIENTO, PARTES, ACCESORIOS O

SERVICIO TECNICO, I.I.AME AI.: 1.800.688.9900

EN CANADA, I.I.AME AI.: 1.800.807.6777

VISITE NUESTRO SITIO WEB EN

WWW.MAYTAG .COM

EN CANAD,X,, WWW.MAYTAG.CA

AU CANADA, POUR ASSISTANCE, INSTAI.I.ATION OU SERVICE,

COMPOSER I.E : 1.800.807.6777

OU VISITER NOTRE SITE INTERNET ,_

WWW. M AYTAG. CA

461970239771

W10127082A

!iiiiiiiiiii___!i_!_!!_!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i_i_!__ii!!__!_!_!_!_!_!iiiiiii1iiiiii_i_¸il¸il_ii¸il_ii¸il_ii¸il_ii¸il_ii¸il_ii¸I¸I¸iliiiiIIiiiiiiillii_iliiiiiiiiiiiiiiii[iiiii_¸i!i!iiiiiiiiiiiii¸ii¸i¸ii¸ii¸i¸i¸i¸ii¸iilii¸ii¸ii¸iii¸i¸iiiiiiiiiiiii¸i¸iiiiiiiiiiiiiii¸i¸iiiiiii!iiiiiiililililiiii!ii!ii!i!ilili!i!!!i!i!i!i!i!i!i!i!i!i!iii!!!!ii

TABLE OF CONTENTS

WASHER SAFETY .................................................................. 3

INSTALLATION REQUIREMENTS ......................................... 4

Tools and Parts ................................................................... 4

Options .............................................................................. 5

I ocation Requirements ....................................................... 6

Drain System ...................................................................... 8

Electrical Requirements ...................................................... 8

INSTALLATION INSTRUCTIONS ......................................... 9

Remove Transport System .................................................. 9

Connect the Inlet Hoses ................................................... 10

Route the Drain Hose ....................................................... 10

Secure the Drain Hose ..................................................... 11

level the Washer .............................................................. 11

Complete Installation ....................................................... 11

FEATURES AND BENEFITS .................................................. 12

WASHER USE ...................................................................... 13

Starting Your Washer .........................................................

Using the Proper Detergent .............................................. 13

Using the Dispenser ......................................................... 14

Pausing or Restarting ........................................................ 15

Changing Cycles, Options and Modifiers ......................... 16

Status Lights ...................................................................... 16

Cycles .............................................................................. 17

Options ............................................................................ 18

Modifiers .......................................................................... 19

Laundry Guide ................................................................. 20

LAUNDRY TIPS ................................................................... 20

I oading ............................................................................ 21

WASHER CARE .................................................................... 21

Cleaning Your Washer ..................................................... 21

Water Inlet Hoses ............................................................. 21

Vacation, Storage, and Moving Care ................................ 21

TROUBLESHOOTING ......................................................... 22

ASSISTANCE OR SERVICE ................................................... 25

In the U.S.A ...................................................................... 25

In Canada ......................................................................... 25

WARRANTY ........................................................................ 26

INDICE

SEGURIDAD DE LA LAVADORA ....................................... 28

REQUISITOS DE INSTALACION ........................................ 29

Herramientas y piezas ..................................................... 29

Opciones ......................................................................... 30

Requisitos de ubicaci6n ................................................... 30

Sistema de desagLie ...........................................................

Requisitos el6ctricos ........................................................ 33

INSTRUCCIONES DE INSTALACION ................................ 34

Eliminaci6n de[ sistema de transporte .............................. 34

Conexi6n de las mangueras de entrada ........................... 34

Tendido de la manguera de desagLie ............................... 35

Fijaci6n de la manguera de desagLie ................................ 35

Nivelaci6n de la lavadora ................................................ 36

Complete la instalaci6n ................................................... 36

CARACTERiSTICAS Y BENEFICIOS .................................... 37

USO DE LA LAVADORA .................................................... 38

Puesta en marcha de la lavadora ..................................... 38

Uso de detergente adecuado ........................................... 38

Uso den dep6sito .............................................................. 39

C6mo hacer una pausa o reanudar [a marcha ................. 41

Cambio de cic[os, opciones y modificadores .................. 41

Luces de estado ............................................................... 41

Cic[os .............................................................................. 42

Opciones ......................................................................... 43

Modificadores .................................................................. 44

Gu[a para el [avado ......................................................... 45

CONSEJOS DE LAVANDERI'A ............................................ 46

C6mo cargar .................................................................... 46

CUIDADO DE LA LAVADORA .......................................... 47

C6mo [impiar su [avadora ............................................... 47

Mangueras de entrada de agua ........................................ 47

Cuidado para [as vacaciones, el almacenaje o en

caso de mudanza ..................................... i...................... 47

SOLUCION DE PROBLEMAS ............................................. 48

AYUDA O SERVICIO TI_CNICO ......................................... 52

En los EE.UU ................................................................... 52

En Canad4 ....................................................................... 52

GARANTIA ......................................................................... 53

!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!iiiiiiiiiiiiii!_i11iiii_i_i_i_iii_iii_iii_iii_iii_ii_i_i_i_ii_i_i_iiiiiiiiiiiiiiiiiiii:_i_i_i_iiiii_ii_ii_ii_ii_ii_ii_i_i_ii_i_i_ii_i_i_ii_i_i_ii_i_i_ii_iiiiiiii1iii!ii_iiii_i11_iii!i!ii!_!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i!i_!!!!i

TABLE DES MATIERES

SI_CURITI_ DE LA LAVEUSE ................................................. 54

EXIGENCES DqNSTALLATION ........................................... 55

Outillage et pi_ces ........................................................... 55

Options ............................................................................ 56

Exigences d'emplacement ................................................ 57

Syst_'me de vidange ......................................................... 59

Sp6cifications 6[ectriques ................................................. 59

INSTRUCTIONS DqNSTALLATION ................................... 60

Elimination des accessoires de transport .......................... 60

Raccordement des tuyaux d'a[imentation ........................ 61

Acheminement du tuyau de vidange ............................... 61

Immobilisation du tuyau de vidange ................................ 62

R6g[age de ['aplomb de [a [aveuse ................................... 62

Achever ['installation ....................................................... 62

CARACTI_RISTIQUES ET AVANTAGES ............................... 63

UTILISATION DE LA LAVEUSE ........................................... 64

Mise en marche de Ha[aveuse .......................................... 64

Utilisation du d6tergent appropri6 ................................... 64

Uti[isation du distributeur ................................................ 65

Pause ou remise en marche ............................................. 67

Changement des programmes, options et

modificateurs ................................................................... 67

T6moins lumineux ........................................................... 67

Programmes ..................................................................... 68

Options ............................................................................ 70

Modificateurs ................................................................... 71

Guide de lessivage ........................................................... 72

CONSEILS DE LESSIVAGE ................................................... 73

Chargement ..................................................................... 73

ENTRETIEN DE LA LAVEUSE .............................................. 74

Nettoyage de Ha[aveuse ................................................... 74

Tuyaux d'arriv6e d'eau .................................................... 74

Pr6cautions _ prendre avant les vacances, un entre

posage ou un d6m6nagement .......................................... 74

DEPANNAGE ...................................................................... 75

ASSISTANCE OU SERVICE .................................................. 78

Aux Etats-Unis .................................................................. 78

Au Canada ....................................................................... 78

GARANTIE .......................................................................... 79

i__¸Iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."

These words mean:

You can be killed or seriously injured if you don't immediately

follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

i_ i¸

!ii............................

ilS!i

iiiiiiiiiiiiiiii_

_ 3

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

• Read all instructions before using the washer.

• Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,

dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or

explode.

m Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

explode.

m Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during

Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

• Do not reach into the washer if the drum, tub or agitator is

moving.

• Do not install or store the washer where it will be exposed to

the weather.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and

have the skills to carry out.

• See "Electrical Requirements" for grounding instructions.

this time.

SAVE THESE INSTRUCTIONS

INSTALLATION REQUIREMENTS

Gather the required tools and parts before starting installation. The parts supplied are in the

washer drum.

Tools needed for connecting the water inlet hoses

• Pliers (that open to 1%6" [39.5 mm])

• Flashlight (optional)

Tools needed for installation

• Open end wrenches 17 mm and 13 mm

• I.eve[

• Wood block

• Ruler or measuring tape

Parts supplied:

A B

A. Drain hose form

B. Inlet hose (2)

C. Inlet hose washers (4)

D. 7iansport bolt hole plug (4)

E. Beaded strap

Alternate Parts

Your installation may require additional parts. If you are interested in purchasing one of the

items listed here, ca[[ the toil-free number on the cover or in the "Assistance or Service"

section.

If You Have You Will Need to Buy

Laundry tub or standpipe Surnp pump system (if not already available)

taller than 96" (2.4 m)

Overhead sewer Standard 20 gal. (76 I.), 30" (76.2 cm) tail drain tub or

utility sink and sump pump (available from local plumbing

suppliers)

Floor drain Siphon break, Part Number 285834; additional drain hose

Part Number 8318155; and connector kit, Part

Number 285835

Drain hose too short 4 ft (1.2 m) drain hose extension kit, Part Number 285863

Water faucets beyond reach 2 longer water fi[[ hoses:

of fi[[ hoses 6 ft (1.8 m) Part Number 76314,

10 ft (3.0 m) Part Number 350008

Pedestal

A pedestal wi[[ add to the total height of the washer for a total height of 53.5" (135.9 crn).

i_>i¸

Optional pedestal

This pedestal is available in several colors.

To order, ca[[ the dealer from whom you purchased your washer or refer to the "Assistance o_.................

Service" section.

Pedestal Color Part Number

Height

10" (25.4 cm) White MHP1000SQ

10" (25.4 cm) Black MHP1000SB

15.5" (39.4 cm) White MHP1500SQ

15.5" (39.4 cm) Black MHP1500SB

15.5" (39.4 cm) Blue MHP1500SK

Stack Kit

Are you planning to stack your Maytag washer and dryer? To do so you wi[[ need to purchase

a Stack Kit.

To order, ca[[ the dealer from whom you purchased your dryer or refer to the "Assistance or

Service" section. Ask for Part Number 8212640.

Selectingtheproperlocationforyourwasherimprovesperformanceandminimizesnoiseand

possiblewasher"walk."

Yourwashercanbeinstalledunderacustomcounte5orinabasement,laundryroom,closet,

orrecessedarea.See"DrainSystem."

Companionappliancelocationrequirementsshouldalsobeconsidered.Properinstallationis

yourresponsibility.

You will need

• A water heater set to deliver 120°F (49°C) water to the washer.

• A grounded electrical outlet located within 6 ft (1.8 m) of where the power cord is

attached to the back of the washer. See "Electrical Requirements."

Washer Dimensions

• Hot and cold water faucets located within 4 ft (1.2 m) of the hot and cold water fill valves,

and water pressure of 20-100 psi (137.9-689.6 kPa).

• A level floor with a maximum slope of 1" (2.5 cm) under entire washer. Installing the

washer on soft floor surfaces, such as carpets or surfaces with foam backing, is not

recommended.

27"

(68.6 crn)

• A sturdy and solid floor to support the washer with a total weight (water and load) of

400 [bs (180 kg).

I)o not operate your washer in temperatures below 32°F (0°C). Some water can remain in the

washer and can cause damage in low temperatures.

Installation clearances

• The location must be large enough to allow the washer door to be fully opened.

• Additional spacing should be considered for ease of installation and servicing.

• Additional clearances might be required for wall, door, and floor moldings.

• Additional spacing of 1" (2.5 cm) on all sides of the washer is recommended to reduce

noise transfer.

Recommended installation spacing for custom undercounter installation

The dimensions shown are for the recommended spacing.

Custom undercounter installation - Washer only

39" rnin.

(99.0cm)

• Companion appliance spacing should also be considered.

Recommended installation spacing for recessed or closet installation, with or

without a pedestal

The dimensions shown are for the recommended spacing.

Recessed area or closet installation

84" " 48 in.2. -_

(310 cm 2)

-- (86.4cm)

24in.2_ ._

(155crn2)

I1" I_'-31Y2"÷1 4"I<--

(2.5cm) (80cm) (10.2cm)

•_ 3"

(7.6cm)

(7.6 cm)

A. Side view - closet or confined area

B. Closet door with vents

Recessed or closet installation - Washer on pedestal

Recommended installation spacing for recessed or closet installation, with

stacked washer and dryer

18"rnin._

(45.7cm)

I1"_ 81V2"_ 4"1

(2.5cm) (80cm) (10.2cm)

The dimensions shown are for the recommended spacing.

48 in.2*

(310cm2)

24 in.2*

(185cm2)

3"* (7.6cm)

* Required spacing

i?++'i+__?i_

!i?, '+iii+

I"_ 27"--.I<--.£,.I" 8_/+""

(2.5cm) (68.6cm) (2.5cm) (14cm)

A * Required spacing

A. Recessed area ** For venting out the side, 1" (2.5 cm) spacing is a[ [owed.

B. Side view - closet or confined area

76"

(193cm)

,_- 1" -_.- ,,_- 27" -}D.-

(2.5cm) (68.6cm)

(2.5cm)

ii++i++iiii

i+_+i¸

!ii............................

ilS!i

ZIIII_

Recommended installation spacing for cabinet installation

• The dimensions shown are for the recommended spacing.

• For cabinet installation, with a doob the minimum ventilation openings in the top are

required.

" . )

7"(17.8cm)

(_'2.9cm)

4" 311/2'' 1........

(10.2cm) (00.0cm)(2.5cm)(2.5cm)(60.6cm) (2.5cm)

The washer can be installed using the standpipe drain system (floor or wall), the laundry tub

drain system, or the floor drain system. Select the drain hose installation method you need.

See "Tools and Parts."

Standpipe drain system - wall or floor (views A & B)

The standpipe drain requires a minimum diameter standpipe of 2" 15 cm). The minimum

carry-away capacity can be no less than 17 gal. (64 I_)per minute.

The top of the standpipe must be at least 30" (76.2 cm) high and no higher than 96" (2.4 m)

from the bottom of the washer.

30" rain.

(76.2crn)

Laundry tub drain system (view C)

The laundry tub needs a minimum 20 gal. 176 I.) capacity. The top of the laundry tub must be

at least 30" 176.2 cm) above the floor.

Floor drain system (view D)

The floor drain system requires a siphon break that may be purchased separately. See "Tools

and Parts."

The siphon break must be a minimum of 28" (71 cm) from the bottom of the washer.

Additional hoses might be needed.

C D

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

• A 120 volt, 60 Hz., AC only, 15- or 20-amp, fused electrical supply is required. Time-

delay fuse or circuit breaker is recommended. It is recommended that a separate circuit

serving only this appliance be provided.

• This washer is equipped with a power supply cord having a 3 prong grounding plug.

• To minimize possible shock hazard, the cord must be plugged into a mating, 3 prong,

grounding-type outlet, grounded in accordance with local codes and ordinances. If a

mating outlet is not available, it is the personal responsibility and obligation of the

customer to have the properly grounded outlet installed by a qualified electrician.

• If codes permit and a separate ground wire is used, it is recommended that a qualified

electrician determine that the ground path is adequate.

• Do not ground to a gas pipe.

• Check with a qualified electrician if you are not sure the washer is properly grounded.

• Do not have a fuse in the neutral or ground circuit.

GROUNDING iNSTRUCTiONS

For a grounded, cord=connected washer:

This washer must be grounded, in the event of a malfunction

or breakdown, grounding will reduce the risk of electrical

shock by providing a path of least resistance for electric

current. This washer is equipped with a cord having an

equipment-grounding conductor and a grounding plug. The

plug must be plugged into an appropriate outlet that is

properly installed and grounded in accordance with all local

codes and ordinances.

WARNING: improper connection of the equipment-

grounding conductor can result in a risk of electric shock.

Check with a qualified electrician or serviceman if you are in

doubt as to whether the appliance is properly grounded.

Do not modify the plug provided with the appliance - if it will

not fit the outlet, have a proper outlet installed by a qualified

electrician.

For a permanently connected washer:

This washer must be connected to a grounded metal,

permanent wiring system, or an equipment grounding

conductor must be run with the circuit conductors and

connected to the equipment-grounding terminal or lead on

the appliance.

Excessive Weight Hazard

Use two or more people to move and install washer.

Failure to do so can result in back or other injury.

IMPORTANT: Position the washer so that the rear of the washer is within approximately

3 ft (90 cm) of its final location.

There are 4 bolts in the rear panel of the washer that support the suspension system during

transportation. These bolts also retain the power cord inside the washer until the bolts are

removed.

1. Using a 13 mm wrench, loosen each of the bolts.

2. Once the bolt is loose, move it to the center of the hole and completely pull out the bolt,

including the plastic spacer covering the bolt.

i_ i¸

!ii............................

iiiiiiiiiiiiiil;

3. Once all 4 bolts are removed discard bolt and spacers. Then pull the power cord through

the opening of the rear panel and close the hole with the attached cap.

4. Close the bolt holes with the 4 transport bolt hole plugs.

NOTE: If the washer is to be transported at a later date, call your local service center. To avoid

suspension and structural damage to your washe_; it must be properly set up for relocation by

a certified technician.

' s

Make sure the washer drum is empty.

1. Attach the hose with the red color indicator to the Hot ([eft) inlet valve. Attaching the red

coupling first makes it easier to tighten connection with pliers. Screw on coupling by

hand until it is seated on the washer.

2. Attach the hose with the blue color indicator to the Cold (right) water inlet valve. Screw

on coupling by hand until it is seated on the washer.

Proper routing of the drain hose protects your floors from damage due to water leakage. Read

and follow these instructions.

Remove drain hose from washer cabinet

Gently pu[[ the corrugated drain hose from the shipping dips.

4°

H. Hot water inlet

C. CoM water inlet

Using pliers, check the tightness of the hose couplings already attached to the washer.

NOTE: Do not overtighten. Damage to the coupling can result.

Attach hot water hose to the hot water faucet. Screw on coupling by hand until it is seated

on the washer.

Attach cold water hose to the cold water faucet. Screw on coupling by hand until it is

seated on the washer.

Using pliers, tighten the couplings with an additional two-thirds turn.

NOTE: Do not overtighten. Damage to the coupling can result.

Turn on the water faucets and check for leaks.

NOTE: Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Record

hose installation or replacement dates on the hoses for future reference.

Periodically inspect and replace hoses if bulges, kinks, cuts, weab or leaks are found.

Laundry tub drain or standpipe drain

Connect the drain hose form to the corrugated drain hose.

A B

A. Snap either end of the drain hose form to the drain hose at

the point where the corrugation begins.

B. Bend drain hose over drain hose form and snap into place.

To keep drain water from going back into the washer:

• Do not straighten the drain hose, and do not force excess drain hose into standpipe. Hose

should be secure, but loose enough to provide a gap for air.

• Do not lay excess hose on the bottom of the laundry tub.

Floor drain

You may need additional parts. See Floor drain under "Tools and Parts."

Drape the power cord over the washer top.

Secure the drain hose to the laundry tub leg or standpipe with the beaded strap provided.

(See illustrations A and B.)

A B C

If the washer faucets and the drain standpipe are recessed (see illustration C), put the

hooked end of the drain hose in the standpipe. Tightly wrap the beaded strap around the

water inlet hoses and the drain hose.

Do not force excess drain hose into the standpipe.

Properly leveling your washer avoids excessive noise and vibration.

1. Check the levelness of the washer by placing a level on the top edge of the washer, first

side to side, then front to back.

(

1. Check the electrical requirements. Be sure that you have the correct electrical supply and

the recommended grounding method. See "Electrical Requirements."

2. Check that all parts are now installed. If there is an extra part, go back through the steps to

see which step was skipped.

3. Check that you have all of your tools.

4. Dispose of/recycle all packaging materials.

5. Check that the water faucets are on.

6. Check for leaks around faucets and inlet hoses.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

i_>i¸

!ii............................

ZIIII

2,.

If the washer is against a wall, move the washer out slightly before tipping back. If the

washer is not [eve[, first prop the front with a wood block and adjust the feet as necessary;

then prop the back and adjust feet as necessary. Repeat this step until washer is [eve[.

Make sure all four feet are stable and resting on the floor. Then check that the appliance is

perfectly [eve[ (use a [eve[).

After the washer is [eve[, use a 17 mm open-end wrench to turn the nuts on the feet tightly

against the washer cabinet.

IMPORTANT: All four feet must be tightened. If the nuts are not tight against the washer

cabinet, the washer may vibrate.

The washer should not move front to back, side to side, or diagonally when pushed on its

top edges.

Slide the washer to its final location.

Confirm the levelness of the washer.

Plug into a grounded 3 prong outlet.

Read "Washer Use."

To test and to clean your washe_; measure V2the detergent manufacturer's recommended

amount of HE High Efficiency detergent for a medium-size load. Pour the detergent into

the detergent dispenser. Select NORMAI_/CASUAI., and then select HOI.D TO START.

Allow the washer to complete one whole cycle.

Use only HL High Lfficiency detergent.

Electronic Controls

Flexible electronic controls are easy to use whether you are a beginner or an expert.

Smart Dispensers

The Smart Dispensers make your washer truly automatic. This washer provides a four-

compartment dispenser which includes separate compartments for main wash detergent,

fabric softenec bleach, and auto oxi prewash or auto soak. The dispenser has large pour

zones. The dispenser is self-cleaning, and can be easily removed. I.aundry products are

diluted with fresh water and added to the load at the proper time in the wash cycle.

Auto Water Level

This washer automatically adjusts water level for optimal cleaning and rinsing performance.

Two sensors determine load size, load composition, and suds level, then the sensors adjust

the water level to the proper setting. This eliminates guesswork. The water level is just right for

every wash load size.

Super Size Capacity

Since there is no agitatob you can wash largeb bulkier items such as a king-sized bedspread.

You are also able to wash more clothes at one time, which means fewer loads.

Smooth Balance _M Balance System

To reduce washer "walk" and "off-balance" conditions, your new washer combines:

• 2 Springs to isolate vibration

• 4 Shock absorbers at the washer base to minimize movement

Commerical Quality Stainless Steel Drum

The commercial quality stainless steel drum eliminates corrosion and enables higher spin

speeds for more water extraction, reducing drying time compared to traditional front-load

washers.

High-Efficiency Wash System

Your new front-loading, high-efficiency washer saves time with fewer, larger loads, and lowers

your water and energy bills by helping conserve resources.

Spin Speeds

This washer automatically selects the spin speed based on the cycle selected. This factory

setting can be changed, however. This washer offers up to five different spin speed choices.

Heating Element

This washer has a heating element that automatically heats the water to the optimal

temperature on select cycles. This enables stepped cleaning, a process in which warm water

is brought in and mixed with detergent first, then the water is heated. Stepped cleaning starts

the wash cycle with warm water to help remove stains (such as blood and grass). This heater is

active in the Sanitary, Whitest Whites and Heavy Duty cycles.

Automatic Temperature Control

The automatic temperature control electronically senses and maintains a uniform water

temperature. Automatic temperature control regulates incoming hot and cold water.

Automatic temperature control is automatically turned on when a cycle is selected.

Add A Garment

When this option is available at the beginning of the cycle the Add A Garment status light will

glow for the first 8 minutes. This washer allows an 8-minute period in which other garments

may be added to a load.

Special Cleaning Action with Sensi-Care _m Wash System

This washer channels 100% of the water through the dispensers to assure thorough rinse-out

and mixture of all the laundry products before they touch any garments. The water is then

sprayed from the top front onto the center of the load, providing even distribution and

optimum cleaning performance. It is normal for small amounts of water to remain in the

dispensers when the wash cycle is complete.

Efficient Detergent System

This washer has a specially designed valve that closes during the wash portion of the cycle so

that 100% of the water and detergent mixture is used on the load. The Efficient Detergent

System ensures that no water or detergent is wasted.

Dynamic Off-Balance Detection

This washer uses two sensors to detect load size and the amount of off-balance within the

load. The suspension system and controls are specially designed to redistribute the load

automatically.

WASHER USE

Sanitar Drain / Spin

Whitest Whites ,Rinse / Spin

_Soak

CONTROL ON 0

Add a Garment O

Soak / Prewash O

Wash O

Rinse O

Rinse Hold O Delicate _

Spin 0

Silk_

Cycle Complete 0 Woo

Control Locked O Handwas_

Estimated Time

Remaining

_'0 Super Hot / Cold Extra HighO_

IO Hot/Cold HighOI ,_"_

MediumOI

LoudUl

I 0 Warm / Warm

_ Warm / CoM Extra LowO[ Soft O[

Cold/_

ooOOOc .

ock / unlock Pause

contro

NOTE: The panel shown above may be different from that of your model.

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completely remove oil.

Do not dry anything that has ever had any type of oil on

it (including cooking oils).

Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the

IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.

The following is a guide to using your washer. Please refer to specific sections of this manual

for more detailed information.

Do not store laundry products on the top surface of this washer. Vibration is normal during

operation.

Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer

errors, longer cycle times and reduced rinsing performance. It may also result in component

failures and noticeable mold or mildew. HE detergents are made to produce the right amount

of suds for the best performance. Follow the manufacturer's instructions to determine the

amount of detergent to use.

Use only H_ High Uficiency detergent.

First Wash Cycle Without laundry

Before washing clothes for the first time, if not completed during the final installation step,

choose the Normal/Casual cycle and run it without clothes. Use only HE High Efficiency

detergent. Use V2 the manufacturer's recommended amount for a medium-size load. This

initial cycle serves to ensure the interior is clean before washing clothes.

For All Wash Cycles

Open the washer door by pulling on the handle. Sort laundry according to color and type

of fabric. Place a load of sorted clothes in the washer. Do not overload washer.

Overloading can cause poor cleaning.

• The washer can be fully loaded, but not tightly packed. Washer door should close

easily.

• Mix large and small items and avoid washing single items. I.oad evenly.

• It is recommended that you wash small items such as infant socks in a mesh garment

bag.

• When unloading garments, occasionally check under the gray colored seal at the

front of the tub for small items.

!i............................

][:

Close the washer door by pushing it firmly until the lock clicks. The washer door will

remain locked during the wash cycle.

NOTE: After any wash cycle is completed, the door must be opened and then closed

before a new cycle can begin. The door can be opened only if PAUSE/OFF is selected

while the ADD A GARMENT light is glowing or if the cycle has been canceled. See "To

cancel a cycle" in "Changing Cycles, Options and Modifiers" section.

3. Open the dispenser drawer and add laundry products to the detergent, bleach, or fabric

softener compartments. Close drawer slowly to avoid spills. See "Using the Dispenser."

4. Turn on the washer by selecting CONTROl_ ON. Select one of the cycles by turning the

cycle selector. The indicator light for the selected cycle will glow. When selecting a wash

cycle, the preset Options, Water Temp, Spin Speed, and Soil I.evel for the selected cycle

will glow. The display shows the estimated time remaining. The preset settings provide the

recommended fabric care for the selected cycle. See "Cycles."

5. Select the desired Options, such as Oxi Prewash, Auto Soak, Extra Rinse and Rinse Hold.

Not all options are available with all cycles. See "Options."

6. Select the desired Modifiers, such as Soil I_evel, Water Temp, Spin Speed and Cycle End

Signal. Not all modifiers are available with all cycles and options. See "Modifiers."

7. If desired, select the CYCI_E END SIGNAl_. The signal is helpful when you are washing

items that should be removed from the washer as soon as it stops. Select I.oud, Soft or

OFF.

To begin the wash cycle immediately

Select HOI.D TO START.

• If you do not select HOI.D TO START within 5 minutes of choosing a cycle, the

washer automatically shuts off.

When the wash cycle is complete, the CYCI_E COMPI.ETE status light glows, the door

unlocks, and the wash load can be removed from the washer. The washer powers

down automatically 5 minutes after the cycle is complete and the CYCI_E COMPI.ETE

light goes off. To power down the washer manually after the wash cycle is complete,

select

PAUSE/OFF once.

Your new washer has a dispenser drawer with four separate compartments for your laundry

products--two are for detergent, one is for liquid chlorine bleach, and one is for liquid fabric

softener. I.aundry products are diluted and dispensed automatically at the proper time during

the wash cycle, making it unnecessary for you to return to the washer during the cycle to add

them.

It is normal for small amounts of water to remain in the dispensers when the wash cycle is

complete.

I)o not put laundry products directly into the wash tub. Always use the proper dispensers

when adding laundry products.

Choosing the Right Detergent

Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less water, will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in washer

errors, longer cycle times and reduced rinsing performance. It may also result in component

failures and noticeable mold or mildew. HE detergents are made to produce the right amount

of suds for the best performance. Follow the manufacturer's instructions to determine the

amount of detergent to use.

Use only HE High Efficiency detergent.

To fill dispenser compartments

1. Pull out the dispenser drawer.

2. Add the desired laundry product to the proper compartment.

3. Push in the dispenser drawer slowly and completely (to avoid a spill).

Dispenser

A. Oxi Prewash detergent compartment

B. Separator

C. Main Wash detergent compartment

D. Dispenser release lever

E. Chlorine bleach compartment

E Fabric softener compartment

14 .... ..........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

Oxi Prewash detergent compartment

(I.etter A in Dispenser Illustration)

Acid detergent to this compartment when using the Oxi Prewash option or Auto Soak. I_iquid

or powdered detergent may be used in this compartment. The detergent will automatically be

dispensed during Oxi Prewash, if the Oxi Prewash option is selected, or during the soak time

if Soak is selected.

• Using High Efficiency (HE) detergent, add 1/3the recommended amount to the Oxi

Prewash compartment and % the recommended amount to the Main Wash compartment.

For the use of an oxygenated pre-treater or laundry product, use the recommended

dosage for High Efficiency (H E) machines, located on the back of the detergent packaging.

Do not fill beyond the "MAX" level.

Main Wash detergent compartment

(I.etter C in I)ispenser Illustration)

Acid liquid or powdered detergent to this compartment for your main wash cycle. The

detergent separator must always be in place, either in the front or back position.

IMPORTANT: If you are using the Oxi Prewash or Soak option, powdered detergent must be

used in the Main Wash compartment, since liquid detergents may seep out of the Main Wash

compartment before the main wash begins.

• I])o not fill beyond the "MAX" level. Use the detergent manufacturer's recommended

amount for load size.

I.iquid or powdered color-safe bleach may be added to the Main Wash compartment

along with the same type of detergent, liquid or powdered.

I.iquid detergent: Put the separator in the front position, between the guides, as shown

following. There will be no gap between the bottom of the wash cycle detergent

compartment and the bottom of the separator.

i [] POWDER _ PREWASHzZ

A _<_ L|QU|D 1 I MAINWASHV

Separator in fiont position, between guides

A. Separator

B. Cuide

LIQUI

Powdered detergent: Put the separator in the back position, behind the guides, as shown

following. There will be a gap between the bottom of the wash cycle detergent

PREWASHA

MA[NWASHV

LIQUI

Sc'_arator in back position, behind guides

A. Separator

B. Guide

NOTE: The separator will be in the POWDER (back) position when shipped from the factory.

Chlorine bleach compartment

(I.etter E in Dispenser Illustration)

Add no more than 1/3cup (80 ml.) liquid chlorine bleach to this compartment. The bleach will

be automatically diluted and dispensed at the optimum time during the first rinse after the

wash cycle. This compartment cannot dilute powdered bleach.

• Always measure liquid chlorine bleach. Use a measuring cup with a pour spout; do not

guess.

• Do not fi[[ beyond the "MAX" [eve[. Overfilling could cause severe garment damage.

Fabric softener compartment

(I.etter F in L-)ispenser Illustration)

Add V4cup (60 ml.) liquid fabric softener to this compartment. Fabric softener wi[[ be

automatically dispensed in the final rinse.

• Do not fi[[ beyond the "MAX" [eve[.

To pause the washer at any time, select PAUSE/OFF.

To continue the cycle, select HOI.D TO START (for approximately

second).

??iii

i_ i¸

!ii............................

ZIII:

Not all Options and Modifiers are available with all cycles. Cycles, Options and Modifiers

can be changed anytime before HOI.I) TO START is selected.

Options and Modifiers can be changed anytime after HOI.I) TO START is selected and before

the start of the selected Option or Modifier.

To cancel a cycle and select a new cycle

1. Select PAUSE/OFF twice.

2. Select desired cycle.

3. Select the desired OPTIONS.

4. Select HOlD TO START (for approximately 1 second) to restart the washer at the

beginning of the new cycle.

To cancel a cycle

1. Select PAUSE/OFF twice.

2. The washer powers down, the door unlocks, and clothes can be removed.

NOTE: If the water level or the temperature is too high, the washer will drain automatically

before the door unlocks.

To change Options or Modifiers after the cycle has started

1. Select PAUSE/OFF once.

2. Select the desired OPTIONS or MODIFIERS.

3. Select HOI.I) TO START (for approximately 1 second) to continue the cycle.

To drain the washer manually

1. Select PAUSE/OFF once.

2. Select DRAIN/SPIN.

3. Select HOlD TO START (for approximately 1 second) to begin the drain.

4. When the spin is complete, the door unlocks. Items can be removed from the washer.

These lights show which portion of the cycle the washer is operating. They also indicate when

you can add an additional item to the wash cycle and when the controls are locked.

CONTROL ON O

Add a Garment 0

Soak / Prewash O

Wash O

Rinse O

Rinse Hold 0

Spin 0

Cyde Complete 0

Control Locked O

Adding items

This washer allows an 8-minute period in which other garments may be added to the load.

You can add items to the washer if the ADD A GARMENT status light is glowing.

To add items

1. Select PAUSE/OFF once. The washer door unlocks, and iterns can be added.

2. To continue the cycle, close the door and select HOlD TO START (for approximately

1 second).

3. To unlock the door after the Add a Garment period, press PAUSE/OFF twice. This will

cancel the Wash Cycle.

Cycle Complete

The cycle cornplete light stays on for 5 rninutes after the cycle is cornplete, and then the

washer shuts off.

Locking controls

The Control I_ock avoids unintended use of the washer. You can also use the control lock

feature to avoid unintended cycle or option changes during a cycle. When CONTROl_

I.OCKED is [it, all buttons are disabled except for PAUSE/OFF and START. You can lock the

controls while the washer is operating.

To lock the controls

Select and hold CYCI.E ENID SIGNAl. for 3 seconds.

Loud q

SoftO[

°.ofJ

CYCLE

END

SIGNAL

Hold _or 3

seconds to

lock / unlock

control

The CONTROl_ I_OCKEI) status light glows.

To unlock the controls

Select and hold CYCI.E ENID SIGNAl. for 3 seconds until the CONTROl. I.OCKED Status light

turns off.

Door Locked

When the status light glows, the door is locked.

Estimated time remaining

The cycle tirne varies autornatica[[y based on your water pressure, water ternperature,

detergent and clothes load. The cycle time will be extended if oversudsing occurs or the load

is unbalanced. The SUDs routine removes extra suds and assures proper rinsing of your

garments. During the unbalance routine, the time displayed may pause until this activity is

complete, then resume with the cycle. These routines may add up to a half-hour to the default

cycle time.

Cycles can be selected by turning the Cycle control knob to the desired cycle. Each cycle is

designed for different types of fabric and soil levels.

Sanitar cYCLEs Drain / Spin

Whitest Whites, Rinse / Spin

pSoak

Norma

Silk

Wool

Handwash

Each cycle has a preset Soil I_evel (cycle time), Water Temperature and Spin Speed, and

may have preset options. The preset settings provide the recommended fabric care for the

selected cycle.

The preset settings can be changed anytime before HOI_D TO START is pressed. Not all

options and modifiers are available with all cycles. (To change settings after the cycle has

started, press PAUSE/OFF once, then select the desired settings. Press HOlD TO START to

continue the cycle.)

Sanitary

Use this cycle to clean heavily soiled, colorfast fabrics. This cycle combines a super hot water

temperature and fast-speed tumbling to help ensure the removal of heavy soils and stains. It is

recommended that you set your hot water heater to 120°F (49°C) to ensure proper

performance during this cycle. Extra high speed spin helps shorten drying time.

Whitest Whites

This cycle is especially designed for cleaning loads of soiled white fabrics with the addition of

bleach. Hot washing temperatures assure optimal bleach activity. An additional rinse provides

optimal rinse performance to avoid chlorine residues on your laundry. This cycle combines

fast-speed tumbling, longer wash time, and extra high speed spin to shorten drying time.

Heavy Duty

Use this cycle to wash loads of sturdy, colorfast fabrics and heavily soiled garments. This cycle

combines fast-speed tumbling, longer wash time, and extra high speed spin to shorten drying

times. If the water temperature is lower than needed for this cycle, the heater will warm the

water to the optimum temperature.

Normal/Casual

Use this cycle to wash normally soiled cottons and linens. This cycle combines medium-

speed tumbling and high-speed spin.

Rapid Wash

Use this cycle to wash small loads of lightly soiled garments that are needed in a hurry. This

cycle combines fast-speed tumbling, a shortened wash time, and extra high speed spin to

shorten drying time.

Delicate

Use this cycle to wash no-iron fabrics and garments labeled "Permanent Press" or "Wrinkle

Free" or that indicate using a "Gentle" cycle on the care label. This cycle combines low-speed

tumbling and low-speed spin to help reduce wrinkling.

Silk

Use this cycle to clean washable silk garments. (Check label instructions to make sure that

garment is washable.) This cycle gently tumbles and drains without spinning to gently clean

garments and help minimize wrinkling. Because there is no spinning action, garments will

contain a higher amount of water at the end of this cycle.

Wool

Use this cycle to clean machine washable woolen garments. (Check the care instructions to

make sure that garment is washable.) This cycle features gentle tumbling and low-speed spin

to provide optimum garment care.

Handwash

Use this cycle to clean hand washable and special-care garments. Similar to the way garments

are hand washed in a sink, the wash action of this cycle combines periods of low-speed

tumbling and soaking. I.ow-speed spin helps reduce wrinkling.

Soak

Use the Soak cycle to remove small spots of set-in stains on fabrics. This cycle provides a soak

time with warm or cold water followed by drain. Extra water, a short tumbling phase for equal

distribution of the laundry, and a soaking time without drum movement improve the removal

of set-in stains. Drain without spin assures gentle treatment, even for delicate articles.

Rinse/Spin

Use this cycle to get a rinse and spin only. This cycle combines fast-speed tumbling and extra

high speed spin. If desired, you can reduce the spin speed by selecting the speed you want

from the SPIN SPEED modifier.

A Rinse/Spin cycle is useful for

• I.oads that need rinsing only.

• Adding fabric softener to a load.

Drain/Spin

Use this cycle to drain your washer or to drain and spin your wash load. The spin speed is

preset to extra high. If desired, you can reduce the spin speed by selecting the speed you want

from the SPIN SPEED modifier.

NOTE: I.oads of synthetics, delicate fabrics, hand washables, and washable woolens should

be drained with no spin or low spin speed to avoid fabric stress.

i_>i¸

!ii............................

ilS!i

iiiiiiiiiiiiii_

Preset cycle settings

Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The

preset settings provide the recommended fabric care for the selected cycle. See chart.

Cycles Soil Level Water Temp Spin Speed

(cycle time)

Sanitary Normal Super Hot/Cold Extra High +

(1:55)

Whitest Whites Normal Hot/Cold Extra High+

(1:00)

Heavy Duty Normal Hot/Cold Extra High+

(1:15)

Normal/Casual Normal Warm/Cold High

(0:40)

Rapid Wash I_esssoil Warm/Cold Extra High +

(0:35)

Delicate Normal Warm/Cold Medium

(0:35)

Silk Normal Cold/Cold No Spin

@:26)

Wool Normal Cold/Cold Medium

@:30)

Handwash Normal Cold/Cold Extra I.ow

@:30)

Soak Normal Warm/Cold No Spin

@:30)

Rinse/Spin Normal Cold/Cold Extra High

(0:21)

Drain/Spin Normal N/A Extra High

(0:11)

+Spinspeeds may vary on some models

To change the preset cycle settings

Press the selector of each setting until the desired setting glows.

You can customize your wash by adding options to your cycle selections. You can add or

change an option after starting a cycle anytime before the selected option begins. Not all

options are available with all cycles.

0 0 0 0

Oxi Auto Extra Rinse

Prewash Soak Rinse Hold

See the "l.aundry Guide" for an overview of possible options for each Wash Cycle

selection.

You can select more than one option for a cycle. Some options cannot be added to some

cycles; for example, Oxi Prewash cannot be added to the Rapid Wash cycle.

If an option is available with a selected cycle, the light for that option will glow when

selected.

If an option is unavailable with a selected cycle, there will be a short tone, and the light

for that option will not glow when selected.

Oxi Prewash

Use this option for heavily soiled loads that need pretreatment. This option adds a 15-minute

Oxi Prewash and drain to the main wash cycle.

NOTES:

• Add Oxi or color safe products or / detergent to the Oxi Prewash and Main Wash

compartments of the Dispenser Drawer.

• When using Oxi Prewash, use powdered detergent for the Main Wash detergent

compartment because liquid detergent will seep into the washer during Auto Soak.

NOTE: The Oxi Prewash and Auto Soak options cannot be selected in the same cycle.

Auto Soak

Use the Auto Soak option for loads of heavily soiled cotton, linen, polyester or nylon with

stains. During Auto Soak, water will be added to the drum and the laundry will be equally

distributed by a short tumbling phase. I_aundry will then be soaked by phases without drum

movement. After soaking, the washer drains without spinning.

• Add detergent to both the Oxi Prewash and Main Wash compartments of the Dispenser

Drawer.

Normal Washer Sounds •

As with any new product, you will hear sounds that you are not accustomed to. You may hear

various sounds when the door is locked and unlocked, and during the washing, rinsing, and •

spinning process. Between changes in wash actions, there will be momentary pauses. You

will hear water spraying and splashing during the wash and rinse cycles. These new sounds •

and pauses are part of normal washer operation.

Use powdered detergent for the main wash cycle because liquid detergent will seep into

the washer during Auto Soak.

For cycles with Hot Wash Temperatures, the Soak temperature is set to WARM. Otherwise

the Soak temperature is the same as the Wash Temperature.

The Auto Soak and Oxi Prewash options cannot be selected in the same cycle.

Extra Rinse

An extra rinse can be used to ensure the removal of detergent or bleach residue from

garments. This option provides an additional rinse with the same water temperature as the first

rinse.

Rinse Hold

Use this option to help avoid wrinkling of your laundry when a load cannot be rernoved frorn

the washer immediately. The wash cycle is paused before the final drain and spin phase so

that the laundry stays in the rinse water until the cycle is continued. This provides optimal

wrinkle care of your wet laundry. The door stays locked during the Rinse Hold cycle and the

indicator light is flashing. Press RINSE HOI.I) to finish the cycle and unload the washen

Preset cycle settings of Soil I_evel (cycle time), Water Temperature, and Spin Speed can be

changed. You can change a modifier after starting a cycle anytime before the selected

modifier begins. Not all modifiers are available with all cycles and options.

I Super Hot / Cold

oOHot / Cold

Warm / Warm

Warm / Cold

Cold / Cold

Extra High O]

HighO I

MediumO I LoudO]

Extra LowO I SoftOI

No SpinO? OffO?

0 0 0

WATER SPIN CYCLE

TEMP SPEED END

SIGNAL

Ho]d for 3

seconds to

lock / unlock

controJ

To change the water temperature, select the WATER TEMP button until the desired setting

glows.

To change the spin speed, select the SPIN SPEEI) button until the desired setting glows.

To change the loudness of the Cycle End Signal, select (AI)JUSTABI.E) CYCI.E ENI)

SIGNAl .....

_SOIL LEVEL_

• To change cycle time, select SOIl. I.EVEI. button.

Wash/Rinse Temp

Select a water ternperature based on the type of load you are washing. Use the warrnest wash

water safe for fabrics. Follow garment label instructions.

Warm rinses leave the loads dryer than cold rinses. Warm rinses increase wrinkling. In cold

climates, a warm rinse makes the load more comfortable to handle. Cold rinses save energy.

Temperature Guide

Wash Water Temperature Suggested Fabrics

SUPER HOT Sturdy colorfast fabrics

Heavy soils

HOT Sturdy colorfast fabrics

Whites and pastels

Heavy soils

WARM Bright colors

Moderate to light soils

COLD Colors that bleed or fade

Light soils

In wash water temperatures colder than 60°t -.(15.6°C), detergents do not dissolve well, Soils

may be difficult to remove.

Automatic Temperature Control

The autornatic ternperature control electronically senses and rnaintains a uniforrn water

temperature. Automatic temperature control regulates incoming hot and cold water.

Automatic temperature control is automatically turned On when a cycle is selected. See

"Preset Cycle Settings" in "Cycles."

• Automatic temperature control works for all wash and rinse temperature settings.

i_ i¸

!ii............................

ilS!i

ZIIII

Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these washer cycles.

CYCLE SUGGESTED LOAD TYPE AVAILABLE OPTIONS

Rinse/Hold Oxi Prewash _ Auto Soak _ Extra Rinse

Sanitary Heavily soiled underwear, towels, work clothes, diapers, etc. t/ t/ t/ t/

Whitest Whites Heavily soiled white fabrics _/ _/ _/ _/

Heavy Duty Heavily soiled underwear, towels, shirts, etc. _/ _/ _/ _/

Normal/Casual Normally soiled blouses, shirts, overalls, etc., made of polyesteb nylon, cotton, linen, or _/ _/ _/ _/

cotton Mends

Rapid Wash I.ightly soiled sports wear made of cotton, polyester, nylon, or cotton blends _/ _/ _/

Delicate Use this cycle to wash no-iron fabrics and garments labeled "Permanent Press" or "Wrinkle _/ _/ _/ _/

Free" or that indicate using a "Gentle" cycle on the care label.

Silk Fabrics made of silk identified as machine washable _/ _/

Wool Woolens with a felt-free finish, identified as machine washable _/ _/

Handwash Fabrics made of silk, special-care items marked "Handwashable" _/ _/

Soak Fabrics made of cotton linen, polyester or nylon

Rinse/Soak Fabrics made of cotton linen, polyester or nylon _/ _/

Drain/Spin Fabrics made of cotton linen, polyester or nylon

*Oxi Prewash and Auto Soak cannot be selected at the same time.

LAUNDRY TIPS

Preparing clothes for washing

Follow these recommendations to help you prolong the life of your garments.

• Use only High Efficiency detergents. The package for this type of detergent will be marked

"HE" or "High Efficiency." This wash system, along with less watec will create too much

sudsing with a regular non-HE detergent. Using regular detergent will likely result in

washer errors, longer cycle times and reduced rinsing performance. It may also result in

component failures and noticeable mold or mildew. HE detergents are made to produce

the right amount of suds for the best performance. Follow the manufacturer's instructions

to determine the amount of detergent to use.

Use only HL High Lfficiency detergent.

Close zippers, snaps, and hooks to avoid snagging other items. Remove pins, buckles, and

other hard objects to avoid scratching the washer interior. Remove non-washable trim and

ornaments.

• Empty pockets and turn them inside-out.

• Turn down cuffs; brush away lint and dirt.

• Turn wool and synthetic knits inside-out to avoid pilling.

• Tie strings and sashes so they will not tangle.

• Mend tears, loose hems, and seams.

• Treat spots and stains.

• Stained or wet garments should be washed promptly for best results.

• Mix large and small items, avoid washing single items, and load evenly.

• Wash small items, such as infant socks, in a mesh garment bag. To create a balanced load

it is recommended that more than one garment bag be used, and that each garment bag

be filled with equal amounts of material.

NOTE: If you are washing only small items, it is recommended that more than one mesh

garment bag be used, and that each garment bag be filled with equal amounts of material.

La page est en cours de chargement...

Maytag Epic MFW9800TQ0 Manuel utilisateur

Marque: Maytag

Modèle: Epic MFW9800TQ0

Catégorie: Machines à laver

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Maytag Epic MFW9800TQ0 User manual
español: Maytag Epic MFW9800TQ0 Manual de usuario

Documents connexes

Autres documents

Askle Sante WINNCARE VTAC410/CIC Manuel utilisateur