Sollae Systems CIE-H14A Manuel utilisateur

Sollae Systems Co., Ltd.

https://www.ezTCP.com

4 ports Remote I/O Controller

CIE-H14A User Manual

Version 1.5

CIE-H14A User Manual Ver. 1.5

- 1 -

https://www.ezTCP.com

This symbol, found on your product or on its packaging, indicates that this

product should not be treated as household waste when you wish to dispose

of it. Instead, it should be handed over to an applicable collection point for the

recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences to the

environment and human health, which could otherwise be caused by inappropriate disposal

of this product. The recycling of materials will help to conserve natural resources. For more

detailed information about the recycling of this product, please contact your local city

office, household waste disposal service or the retail store where you purchased this

product.

※ This equipment obtained certification by using 1.5M serial cable.

CIE-H14A User Manual Ver. 1.5 
 
- 2 - 
https://www.ezTCP.com 
 
Contents 
Contents ............................................................................................................................................ - 2 - 
1 Introduction ............................................................................................................................. - 6 - 
1.1  Introduction .......................................................................................................................................................... - 6 - 
1.2  Features .................................................................................................................................................................. - 6 - 
1.3  Application Examples ....................................................................................................................................... - 7 - 
1.4  Specification ......................................................................................................................................................... - 9 - 
1.4.1
 
H/W specification ..................................................................................................................................... - 9 -
 
1.4.2
 
S/W specification ...................................................................................................................................... - 9 -
 
1.5  Interface .............................................................................................................................................................. - 10 - 
1.5.1
 
Power ........................................................................................................................................................... - 10 -
 
1.5.2
 
Input Ports ................................................................................................................................................ - 11 -
 
1.5.3
 
Output Ports ............................................................................................................................................ - 13 -
 
1.5.4
 
RS232 Port (DB9M) ............................................................................................................................... - 15 -
 
1.5.5
 
Ethernet Interface .................................................................................................................................. - 16 -
 
1.5.6
 
System LED ............................................................................................................................................... - 17 -
 
1.5.7
 
ISP Switch .................................................................................................................................................. - 18 -
 
2 Installation and Test ............................................................................................................ - 19 - 
2.1  Installation .......................................................................................................................................................... - 19 - 
2.1.1
 
Setting Network Aera .......................................................................................................................... - 19 -
 
2.2  Test operation ................................................................................................................................................... - 21 - 
2.2.1
 
Modbus/TCP Test ................................................................................................................................... - 21 -
 
2.2.2
 
HTTP Test with a WEB browser ....................................................................................................... - 23 -
 
3 Configuration ....................................................................................................................... - 24 - 
3.1  Configuration with ezManager ................................................................................................................. - 24 - 
3.1.1
 
Configuration via LAN ......................................................................................................................... - 24 -
 
3.1.2
 
Configuration via Serial ...................................................................................................................... - 25 -
 
3.2  AT command ..................................................................................................................................................... - 26 - 
4 Operation Modes ................................................................................................................ - 27 - 
4.1  What is the Operation Mode? .................................................................................................................. - 27 - 
4.2  How to change the mode to another .................................................................................................. - 27 - 
4.3  Comparison of the each mode ................................................................................................................ - 28 - 
4.4  Normal Mode ................................................................................................................................................... - 28 - 
4.5  Serial Configuration mode ......................................................................................................................... - 29 - 

CIE-H14A User Manual Ver. 1.5 
 
- 3 - 
https://www.ezTCP.com 
 
4.5.1
 
Configuring Parameters ...................................................................................................................... - 29 -
 
4.5.2
 
Revoking Serurity Options................................................................................................................. - 29 -
 
4.6  ISP mode............................................................................................................................................................. - 30 - 
4.6.1
 
Upgrading Firmware............................................................................................................................. - 30 -
 
4.6.2
 
Upgrading HTML ................................................................................................................................... - 30 -
 
4.6.3
 
Revoking Serurity Options................................................................................................................. - 30 -
 
5 Methods for I/O control .................................................................................................... - 31 - 
5.1  Modbus/TCP ...................................................................................................................................................... - 31 - 
5.1.1
 
Related Parameters ............................................................................................................................... - 31 -
 
5.1.2
 
Modbus/TCP Slave Mode .................................................................................................................. - 32 -
 
5.1.3
 
Modbus/TCP Master Mode ............................................................................................................... - 32 -
 
5.1.4
 
TCP Connection Modes ...................................................................................................................... - 33 -
 
5.1.5
 
Initial Output Value ............................................................................................................................... - 33 -
 
5.1.6
 
Write Pulse ................................................................................................................................................ - 33 -
 
5.1.7
 
Communication with HMI ................................................................................................................. - 34 -
 
5.2  Serialized Modbus/TCP ................................................................................................................................ - 36 - 
5.3  Macro Mode ...................................................................................................................................................... - 36 - 
5.3.1
 
Operator ..................................................................................................................................................... - 36 -
 
5.3.2
 
Operand ..................................................................................................................................................... - 37 -
 
5.3.3
 
An Example of Equations ................................................................................................................... - 37 -
 
5.4  Web (HTTP) ........................................................................................................................................................ - 38 - 
5.4.1
 
Changing port number for HTTP ................................................................................................... - 38 -
 
5.4.2
 
Uploading Users’ Web Page ............................................................................................................. - 39 -
 
6 Communication Modes ...................................................................................................... - 40 - 
6.1  TCP Server .......................................................................................................................................................... - 40 - 
6.1.1
 
Key parameters ....................................................................................................................................... - 40 -
 
6.1.2
 
An Example ............................................................................................................................................... - 41 -
 
6.2  TCP Client ........................................................................................................................................................... - 44 - 
6.2.1
 
Key parameters ....................................................................................................................................... - 44 -
 
6.2.2
 
Examples .................................................................................................................................................... - 45 -
 
6.3  AT Command .................................................................................................................................................... - 48 - 
6.3.1
 
Key parameters ....................................................................................................................................... - 48 -
 
6.3.2
 
Examples .................................................................................................................................................... - 49 -
 
6.4  UDP ....................................................................................................................................................................... - 52 - 
6.4.1
 
Key parameters ....................................................................................................................................... - 52 -
 
6.4.2
 
Examples .................................................................................................................................................... - 53 -

CIE-H14A User Manual Ver. 1.5 
 
- 4 - 
https://www.ezTCP.com 
 
7 System Management .......................................................................................................... - 55 - 
7.1  Upgrading Firmware ...................................................................................................................................... - 55 - 
7.1.1
 
Firmware .................................................................................................................................................... - 55 -
 
7.1.2
 
Processes ................................................................................................................................................... - 55 -
 
7.2  Changing Webpage ....................................................................................................................................... - 56 - 
7.2.1
 
Webpage ................................................................................................................................................... - 56 -
 
7.2.2
 
Processes ................................................................................................................................................... - 56 -
 
7.3  Status Monitoring ........................................................................................................................................... - 58 - 
7.3.1
 
Using TELNET .......................................................................................................................................... - 58 -
 
7.3.2
 
Using ezManager ................................................................................................................................... - 62 -
 
8 Additional Functions ........................................................................................................... - 64 - 
8.1  Security ................................................................................................................................................................ - 64 - 
8.1.1
 
Restriction of Access (ezTCP Firewall) .......................................................................................... - 64 -
 
8.1.2
 
Setting Password .................................................................................................................................... - 64 -
 
8.2  Option Tab Functions .................................................................................................................................... - 65 - 
8.2.1
 
Notify IP Change ................................................................................................................................... - 65 -
 
8.2.2
 
Sending MAC Address ........................................................................................................................ - 66 -
 
8.2.3
 
Debugging Message ............................................................................................................................ - 66 -
 
8.3  Serial Port Tab Functions ............................................................................................................................. - 68 - 
8.3.1
 
TELNET COM port Control Option (RFC 2217) - ① .............................................................. - 68 -
 
8.3.2
 
Disable TCP Transmission Delay - ② ........................................................................................... - 68 -
 
8.3.3
 
Data Frame Interval - ③ .................................................................................................................... - 68 -
 
8.3.4
 
TX interval - ④ ....................................................................................................................................... - 69 -
 
8.3.5
 
TCP Server / Client mode - ⑤ ........................................................................................................ - 69 -
 
8.3.6
 
Separator - ⑥.......................................................................................................................................... - 69 -
 
8.4  I/O Port Tab Functions ................................................................................................................................. - 70 - 
8.4.1
 
Notify Input or Output Port Change (Email) ............................................................................ - 70 -
 
8.4.2
 
Notify Input Port Change .................................................................................................................. - 72 -
 
8.4.3
 
Valid Time .................................................................................................................................................. - 72 -
 
8.4.4
 
Delay ............................................................................................................................................................ - 72 -
 
8.5  Internet Switch ................................................................................................................................................. - 72 - 
9 Self-Test in Trouble ............................................................................................................. - 73 - 
9.1  Searching problem with ezManager ...................................................................................................... - 73 - 
9.2  Connection Problem over Modbus/TCP .............................................................................................. - 74 - 
9.3  Communication Problem over Modbus/TCP ..................................................................................... - 75 - 
10 Technical Support and Warranty ...................................................................................... - 76 -

CIE-H14A User Manual Ver. 1.5

- 5 -

https://www.ezTCP.com

10.1 Technical Support ........................................................................................................................................... - 76 -

10.2 Warranty .............................................................................................................................................................. - 76 -

10.2.1

Free Repair Services ............................................................................................................................. - 76 -

10.2.2

Charged Repair Services..................................................................................................................... - 76 -

11 Precaution and Exemption from Liability ....................................................................... - 77 -

11.1 Precaution........................................................................................................................................................... - 77 -

11.2 Exemption from Liability .............................................................................................................................. - 78 -

11.2.1

English version ........................................................................................................................................ - 78 -

11.2.2

French version ......................................................................................................................................... - 78 -

12 History ................................................................................................................................... - 81 -

CIE-H14A User Manual Ver. 1.5

- 6 -

https://www.ezTCP.com

1 Introduction

1.1 Introduction

CIE-H14A monitors many kinds of systems that use sensors like temperature, humidity,

pressure, and controls the power of remote devices. It detects digital inputs from the

sensors’ outputs and controls the relay outputs. HTTP, Modbus/TCP, serialized Modbus/TCP

and Macro mode can be used for these functions. CIE-H14A is additionally equipped with a

RS232 serial interface to allow users’ serial devices to establish an Ethernet networking

connection so that it can be flexibly used in diverse applications.

1.2 Features

⚫ Remote I/O controller

⚫ 4 Digital Input Ports (photo-coupler interface)

⚫ 4 Digital Output Ports (relay interface)

⚫ Supports Modbus/TCP and HTTP

⚫ Stored Web server for simple management (custom web page)

⚫ Supports serialized Modbus/TCP

⚫ MACRO (stand-alone operation supports simple logical expressions)

⚫ Stable embedded TCP/IP stack

⚫ Easy configuration program (ezManager)

CIE-H14A User Manual Ver. 1.5

- 7 -

https://www.ezTCP.com

1.3 Application Examples

⚫ Remote I/O device server

Figure 1-1 remote I/O device server

⚫ Serialized Modbus/TCP

Figure 1-2 serialized Modbus/TCP

⚫ Internet Switch

Figure 1-3 internet switch

CIE-H14A User Manual Ver. 1.5

- 8 -

https://www.ezTCP.com

⚫ Serial Switch

Figure 1-4 serial switch

⚫ Macro mode

Figure 1-5 macro mode

⚫ Serial Device Server

Figure 1-6 serial device server

CIE-H14A User Manual Ver. 1.5

- 9 -

https://www.ezTCP.com

1.4 Specification

1.4.1 H/W specification

Power

Input Power

DC 8.5~38V

Power Consumption

3W

Size

174mm x 123mm x 28mm

Weight

Approximately 255g

Interfaces

Digital Input

4 ports with photo couplers

Digital Output

4 ports with relays

Serial Port

D-SUB 9 pins male

Ethernet

RJ45

Network

Ethernet 10Base-T or 100Base-TX (Auto-Sensing)

Auto MDI/MDIX(Cable Auto-sensing)

Temperature

Operate: -40 ~ 70℃ / Storage: -40 ~ 85℃

Certification

KC, CE

Environment

Follows Europe RoHS Directive

Table 1-1 H/W specification

1.4.2 S/W specification

Protocol

TCP, UDP, IP, ICMP, ARP, DHCP, DNS lookup, DDNS, SMTP

Telnet COM Port Control Option(RFC2217), Modbus/TCP, HTTP

Operation

mode

Normal

Normal communication mode

ISP

F/W upgrade

Serial

Configuration

Configuration with the RS232 port

Communicati-

on Mode

I/O server

Modbus/TCP – Slave/Master, Passive/Active

Web Browser(HTTP), Macro(Stand-alone),

Serialized Modbus/TCP

Serial devices

server

TCP Server/Client, AT emulation, UDP

Programs

ezManager

Configuration program via LAN

ModMap

Modbus/TCP Application for Windows

Table 1-2 S/W specification

CIE-H14A User Manual Ver. 1.5

- 10 -

https://www.ezTCP.com

1.5 Interface

1.5.1 Power

The Power is interfaced with a 5mm terminal block. Input voltage range is DC 8.5~38V.

Please check the polarity.

Figure 1-7 Power

Figure 1-8 Power polarity



AC is not supported. Please Use DC 8.5~38V.

CIE-H14A User Manual Ver. 1.5

- 11 -

https://www.ezTCP.com

1.5.2 Input Ports

Because each of CIE-H14A’s input ports are isolated by photo-couplers, users don’t need

to worry about the polarity. The circuit of the input port is shown in the figure below.

Figure 1-9 a circuit of the input port

The voltage specification of the input port is as follows:

Over 4.5V

H

1

Under 1.2V

L

0

Max. Input Voltage

DC 24V

Polarity

Auto Polarity

Table 1-3 the voltage specification of the input ports

The input port is interfaced with a 5mm terminal block. Thus, use a (-) shaped

screwdriver to connect it with the user device.

CIE-H14A User Manual Ver. 1.5

- 12 -

https://www.ezTCP.com

⚫ Types for giving input

The type of the input ports is a wet contact by photo-couplers, which needs two

wires with different voltage levels to make an input signal. However, you can use a

DCA (Dry Contact Adapter) so that you can give dry contact input signal.

Without DCA

With DCA

Input

Condition

1: over DC4.5V between the input ports

0: under DC1.2V between the input ports

1: two ports are short

0: two ports are open

Diagram

DC

Adaptable

devices

Devices or sensors which output DC voltage

Relays or Switches

Table 1-4 Input port Diagram



The input ports are designed only for monitoring signals.

CIE-H14A User Manual Ver. 1.5

- 13 -

https://www.ezTCP.com

1.5.3 Output Ports

The output ports of CIE-H14A are interfaced to relays (NO : Normal Open) type as shown

below.

Figure 1-10 a circuit of the output port

The operations of an output port are as follows:

value

relay contact

0

OFF (open)

1

ON (short)

Table 1-5 values of the output port

The allowed current of output port according to voltage condition is as follows:

Voltage Condition

Allowed current

DC 28V

5A

Table 1-6 voltage conditions of the output port



Use a (-) shaped screwdriver to connect it with users’ devices since the output ports

are interfaced with a 5mm terminal block.



Use a power relay when users' device uses AC or excesses the allowed maximum

current consumption.

CIE-H14A User Manual Ver. 1.5

- 14 -

https://www.ezTCP.com

The image of output port is as follows:

Figure 1-11 CIE-H14A output port



The order of CIE-H14A output ports is reversed compared to CIE-H14. For those who

use CIE-H14A as a replacement of CIE-H14, we recommend to check the order of

output ports and then connect with users' devices.

CIE-H14A User Manual Ver. 1.5

- 15 -

https://www.ezTCP.com

1.5.4 RS232 Port (DB9M)

CIE-H14A has an RS232 port supporting from 300 bps to 230,400 bps. This port is for

connecting users’ serial devices to Ethernet (TCP/IP) including the “Serialized Modbus/TCP”.

Figure 1-12 D-sub Male Connector

⚫ Pin Assignment

Number

Name

Description

Level

I/O

Wiring

1

DCD

Data Carrier Detect

RS232

In

Optional

2

RXD

Receive Data

RS232

In

Required

3

TXD

Transmit Data

RS232

Out

Required

4

DTR

Data Terminal Ready

RS232

Out

Optional

5

GND

Ground

-

Required

6

DSR

Data Set Ready

RS232

In

Optional

7

RTS

Request To Send

RS232

Out

Optional

8

CTS

Clear To Send

RS232

In

Optional

9

RI

Ring Indicator

RS232

In

Optional

Table 1-7 pin assignment of the RS232 port

⚫ Serial port parameters

Parameter

available values

Number

1

Type

RS232

Baud rate

300 ~ 230,400 [bps]

Parity

NONE / EVEN / ODD / MARK / SPACE

Data bit

8/7/6/5

Stop bit

1/1.5/2

Flow control

NONE, RTS/CTS, DTR/DSR

Table 1-8 Serial port parameters

CIE-H14A User Manual Ver. 1.5

- 16 -

https://www.ezTCP.com

1.5.5 Ethernet Interface

An RJ45 connector is for the network interface of CIE-H14A. You can use a UTP cable. It

automatically senses 10Mbits or 100Mbits Ethernet. It also provides auto MDI/MDIX

function that can automatically sense a 1:1 cable or cross over cable.

Each Ethernet device has its own hardware address (MAC address). CIE-H14A is shipped

to the market with the hardware address set in the factory.

Figure 1-13 RJ45 connector of CIE-H14A

⚫ Status of the system RJ45 LED

Color

LED status

Description

Yellow

Off

10 Mbps

On

100 Mbps

Green

On

Connecting with Ethernet

Off

Not connecting with Ethernet

Blinking

When sending/receiving network data

Table 1-9 LED status on the RJ45

CIE-H14A User Manual Ver. 1.5

- 17 -

https://www.ezTCP.com

1.5.6 System LED

CIE-H14A has 15 LEDs to indicate the current system status.

Each LED represents the following status:

mode

name

LED status

description

Common

(LAN)

PWR

On

Power is supplied

LINK

On

Connected with network

Blinking

When sending/receiving network data

RXD

Blinking

Receiving data from the Ethernet

TXD

Blinking

Transferring data to the Ethernet

Common

(Serial)

RXD

Blinking

Receiving data from the Serial

TXD

Blinking

Transferring data to the Serial

Normal

mode

STS

Blinking every

second

Assigned an IP address

Blinking 4

times at once

Without being assigned an IP address

by DHCP or PPPoE

On

Establishing a Modbus/TCP

connection

DI

On

When input ports’ signal is ON

DO

On

When output ports’ signal is ON

Serial

Configuration

mode

STS,

RXD, TXD

(LAN)

Blinking

simultaneously

Under the serial configuration mode

ISP mode

STS

Off

Under the ISP mode

Table 1-10 status of the system LED

CIE-H14A User Manual Ver. 1.5

- 18 -

https://www.ezTCP.com

1.5.7 ISP Switch

There is an ISP switch located on the back of the product. It is used to turn CIE-H14A

into the serial configuration mode or ISP mode. If you press it between 20 milliseconds and

1 second, CIE-H14A will go into the serial configuration mode that you can configure the

environment parameters through the RS232 port. If you press it over 1 second or supply

power while pressing it, CIE-H14A will go into the ISP mode. In this mode, you can upload

the firmware file or HTML files.

Figure 1-14 ISP switch



In the ISP and serial configuration mode, you can reset a password or cancel access

restriction. Use these modes when you are faced with the problems.

CIE-H14A User Manual Ver. 1.5

- 19 -

https://www.ezTCP.com

2 Installation and Test

2.1 Installation

In this section, we explain the operation of CIE-H14A through a test. Basically, its input

and output ports are independently used. Thus, you can use either the input ports only for

monitoring or the output ports only for control. However, you can also correlatively use

those ports by using the MACRO mode on the output ports.

Before testing CIE-H14A, you should connect the Ethernet port to a PC. It will be no

problem if the Ethernet connection is established through network hubs.

Figure 2-1 the connection between CIE-H14A and a PC

2.1.1 Setting Network Aera

This step is for setting both CIE-H14A and your PC to be located on the same network to

establish a TCP connection.

⚫ Setting of the PC

Add or change the IP address of the network adapter on your PC.

Click [Windows Control Panel] >> [Network Connections] and a right click of your

mouse to get into [Properties of the Network Adapter], then you will see the

properties of [Internet Protocol (TCP/IP)]. Press the [Advanced Menu] button and add

an IP Address, as shown below.

Figure 2-2 adding / changing an IP address

La page charge ...

Sollae Systems CIE-H14A Manuel utilisateur

Sollae Systems CIE-H14A Manuel utilisateur

dans d''autres langues