Panasonic TX-49FXW554 Le manuel du propriétaire

OPERATING INSTRUCTIONS

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

KULLANIM KILAVUZU

TX-43FXW554

TX-49FXW554

TX-55FXW554

LED TV

Téléviseur LED

Contents

Safety Information ................................................... 2

Markings on the Product.......................................... 2

Maintenance ............................................................ 4

Display panel, Cabinet, Pedestal............................. 4

Mains plug ............................................................... 4

Assembling / Removing the pedestal ...................... 4

When using the wall-hanging bracket...................... 5

Environmental Information....................................... 5

Features .................................................................. 5

Ultra HD (UHD) ........................................................ 5

Accessories Included............................................... 6

Standby Notifications ............................................... 6

TV Control & Operation ........................................... 6

Using Main TV Menu ............................................... 7

Inserting the Batteries into the Remote ................... 8

Power Connection ................................................... 8

Antenna Connection ................................................ 8

License Notification ................................................. 8

Disposal of Old Equipment and Batteries ................ 9

Declaration of Conformity (DoC) ............................. 9

Specification .......................................................... 10

Notice .................................................................... 11

Remote Control ..................................................... 12

Connections........................................................... 13

Switching On/Off .................................................... 14

First Time Installation............................................. 14

Media Playback via USB Input .............................. 15

Media Browser....................................................... 15

CEC ....................................................................... 16

Settings Menu Contents ........................................ 17

General TV Operation ........................................... 22

Using the Channel List .......................................... 22

Configuring Parental Settings ................................ 22

Electronic Programme Guide ................................ 22

Teletext Services ................................................... 23

Software Upgrade.................................................. 23

Troubleshooting & Tips .......................................... 23

PC Input Typical Display Modes ............................ 24

AV and HDMI Signal Compatibility ........................ 24

Supported File Formats for USB Mode ................. 25

Video File Formats ................................................ 25

Picture File Formats .............................................. 25

Audio File Formats ................................................ 25

Subtitle File Formats.............................................. 26

Supported DVI Resolutions ................................... 27

Connectivity ........................................................... 28

Wired Connectivity................................................. 28

Wireless Connectivity ............................................ 28

Wake ON ............................................................... 29

Connectivity Troubleshooting ................................ 30

Using Audio Video Sharing Network Service ......... 30

Apps ...................................................................... 31

Internet Browser .................................................... 31

HBBTV System...................................................... 31

English - 1 -

English - 2 -

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO

NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Note: Follow the on screen instructions for operating the related

features.

In extreme weather (storms, lightning) and long inactivity

periods (going on holiday) disconnect the TV set from the

mains.

The mains plug is used to disconnect TV set from the mains

and therefore it must remain readily operable. If the TV set is

not disconnected electrically from the mains, the device will

still draw power for all situations even if the TV is in standby

mode or switched off.

IMPORTANT - Please read these

instructions fully before installing or

operating

WARNING: This device is intended to be used

by persons (including children) who are

capable / experienced of operating such a device

unsupervised, unless they have been given

supervision or instruction concerning the use of

the device by a person responsible for their safety.

• Use this TV set at an altitude of less than 2000 meters

above the sea level, in dry locations and in regions

with moderate or tropical climates.

• The TV set is intended for household and similar

general use but may also be used in public places.

• For ventilation purposes, leave at least 5cm of free

space around the TV.

• The ventilation should not be impeded by covering

or blocking the ventilation openings with items, such

as newspapers, table-cloths, curtains, etc.

• The power cord plug should be easily accessible. Do

not place the TV, furniture, etc. on the power cord.

A damaged power cord/plug can cause fire or give

you an electric shock. Handle the power cord by the

plug, do not unplug the TV by pulling the power cord.

Never touch the power cord/plug with wet hands as

this could cause a short circuit or electric shock.

Never make a knot in the power cord or tie it with

other cords. When damaged it must be replaced, this

should only be done by qualified personnel.

• Do not expose the TV to dripping or splashing of

liquids and do not place objects filled with liquids,

such as vases, cups, etc. on or over the TV (e.g.,

on shelves above the unit).

• Do not expose the TV to direct sunlight or do not

place open flames such as lit candles on the top of

or near the TV.

• Do not place any heat sources such as electric

heaters, radiators, etc. near the TV set.

• Do not place the TV on the floor and inclined

surfaces.

• To avoid danger of suffocation, keep plastic bags

out of the reach of the babies, children and domestic

animals.

• Carefully attach the stand to the TV. If the stand is

provided with screws, tighten the screws firmly to

prevent the TV from tilting. Do not over-tighten the

screws and mount the stand rubbers properly.

• Do not dispose of the batteries in fire or with

hazardous or flammable materials.

WARNING - Batteries must not be exposed to

excessive heat such as sunshine, fire or the like.

WARNING - Excessive sound pressure from earphones

or headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially

children, push or hit the screen, push anything

into holes, slots or any other openings in the case.

Caution

Serious injury or death risk

Risk of electric shock

Dangerous voltage risk

Maintenance

Important maintenance

component

Markings on the Product

The following symbols are used on the product as

a marker for restrictions and precautions and safety

instructions. Each explanation shall be considered

where the product bears related marking only. Note

such information for security reasons.

Class II Equipment: This appliance is

designed in such a way that it does not require

a safety connection to electrical earth.

Class II Equipment With Functional

Earthing: This appliance is designed in such

a way that it does not require a safety

connection to electrical earth, the earth connection is

used for functional purposes.

Protective Earth Connection: The marked

terminal is intended for connection of the

protective earthing conductor associated with

the supply wiring.

Hazardous Live Terminal: The marked

terminal(s) is/are hazardous live under normal

operating conditions.

i

Caution, See Operating Instructions: The

marked area(s) contain(s) user replaceable

coin or button cell batteries.

CLASS 1

LASER PRODUCT

Class 1 Laser Product: This

product contains Class 1

laser source that is safe under

reasonably foreseeable

conditions of operation.

English - 3 -

WARNING

Do not ingest the battery, Chemical Burn Hazard

This product or the accessories supplied with the

product may contain a coin/button cell battery. If the

coin/button cell battery is swallowed, it can cause

severe internal burns in just 2 hours and can lead

to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely,

stop using the product and keep it away from children.

If you think batteries might have been swallowed or

placed inside any part of the body, seek immediate

medical attention.

– – – – – – – – – – – –

Never place a television set in unstable or inclined

locations. A television set may fall, causing serious

personal injury or death. Many injuries, particularly to

children, can be avoided by taking simple precautions

such as;

• Using cabinets or stands recommended by the

manufacturer of the television set.

• Only using furniture that can safely support the

television set.

• Ensuring the television set is not overhanging the

edge of the supporting furniture.

• Not placing the television set on tall furniture

(for example, cupboards or bookcases) without

anchoring both the furniture and the television set

to a suitable support.

• Not standing the television set on cloth or other

materials placed between the television and

supporting furniture.

• Educating children about the dangers of climbing on

furniture to reach the television set or its controls.

If your existing television set is being retained and

relocated, the same considerations as above should

be applied.

– – – – – – – – – – – –

Apparatus connected to the protective earthing of the

building installation through the MAINS connection or

through other apparatus with a connection to protective

earthing – and to a television distribution system using

coaxial cable, may in some circumstances create a fire

hazard. Connection to a television distribution system

has therefore to be provided through a device providing

electrical isolation below a certain frequency range

(galvanic isolator)

WALL MOUNTING WARNINGS

• Read the instructions before mounting your TV

on the wall.

• The wall mount kit is optional. You can obtain from

your local dealer, if not supplied with your TV.

• Do not install the TV on a ceiling or on an inclined

wall.

• Use the specified wall mounting screws and other

accessories.

• Tighten the wall mounting screws firmly to prevent

the TV from fall. Do not over-tighten the screws.

WARNING

• Using other wall-hanging brackets, or installing

a wall-hanging bracket by yourself have the risk

of personal injury and product damage. In order

to maintain the unit’s performance and safety, be

absolutely sure to ask your dealer or a licensed

contractor to secure the wall-hanging brackets.

Any damage caused by installing without a

qualified installer will void your warranty.

• Carefully read the instructions accompanying

optional accessories, and be absolutely sure to

take steps to prevent the TV from falling off.

• Handle the TV carefully during installation since

subjecting it to impact or other forces may cause

product damage.

• Take care when fixing wall brackets to the wall.

Always ensure that there are no electrical cables

or pipes in the wall before hanging bracket.

• To prevent fall and injury, remove the TV from

its fixed wall position when it is no longer in use.

English - 4 -

2. Place the stand(s) on the stand mounting

pattern(s) on the rear side of the TV.

3. Insert the screws (M4 x 12) provided and tighten

them gently until the stand is properly fitted.

Removing the pedestal from the TV

Be sure to remove the pedestal in the following way

when using the wall-hanging bracket or repacking

the TV.

• Put the TV onto a work table with the screen panel

down on the clean and soft cloth. Leave the stand(s)

protruding over the edge of the surface.

• Unsrew the screws that fixing the stand(s).

• Remove the stand(s).

Maintenance

      

socket.

Display panel, Cabinet, Pedestal

Regular care:

Gently wipe the surface of the display panel, cabinet,

or pedestal by using a soft cloth to remove dirt or

fingerprints.

For stubborn dirt:

1. First clean the dust from the surface.

2. Dampen a soft cloth with clean water or diluted

neutral detergent (1 part detergent to 100 parts

water).

3. Wring out the cloth firmly. (Please note, do not

let liquid enter the TV inside as it may lead to

product failure.)

4. Carefully wipe moisten and wipe away the

stubborn dirt.

5. Finally, wipe away all the moisture.

Caution

Do not use a hard cloth or rub the surface too hard,

otherwise this may cause scratches on the surface.

• Take care not to subject the surfaces to insect

repellent, solvent, thinner or other volatile substances.

This may degrade surface quality or cause peeling

of the paint.

• The surface of the display panel is specially treated

and may be easily damaged. Take care not to tap

or scratch the surface with your fingernail or other

hard objects.

• Do not allow the cabinet and pedestal to make

contact with a rubber or PVC substance for a long

time. This may degrade surface quality.

Mains plug

Wipe the mains plug with a dry cloth at regular

intervals.

Moisture and dust may cause fire or electrical shock.

Assembling / Removing the pedestal

Preparations

Take out the pedestal(s) and the TV from the packing

case and put the TV onto a work table with the screen

panel down on the clean and soft cloth (blanket, etc.)

• Use a flat and firm table bigger than the TV.

• Do not hold the screen panel part.

• Make sure not to scratch or break the TV.

Assembling the pedestal

1. The stand of the TV consists of two pieces. Install

these pieces together.

English - 5 -

When using the wall-hanging bracket

Please contact your local Panasonic dealer to

purchase the recommended wall-hanging bracket.

Holes for wall-hanging bracket installation;

Rear of the TV

a

b

43” 49” 55”

a (mm) 200 200 400

b (mm) 200 200 200

View from the side

a

Depth of screw

(a)

min. (mm)

10

max. (mm)

13

Diameter

M6

Note: The screws for fixing the TV onto the wall-hanging

bracket are not supplied with the TV.

Environmental Information

This television is designed to be environment friendly.

To reduce energy consumption, you can follow these

steps:

If you set the Energy Saving to Minimum, Medium,

Maximum or Auto the TV will reduce the energy

consumption accordingly. If you like to set the

Backlight to a fixed value set as Custom and adjust

the Backlight (located under the Energy Saving

setting) manually using Left or Right buttons on the

remote. Set as Off to turn this setting off.

Note: Available Energy Saving options may differ depending

on the selected Mode in the Settings>Picture menu.

The Energy Saving settings can be found in the Set-

tings>Picture menu. Note that some picture settings

will be unavailable to be changed.

If pressed Right button or Left button consecutively,

“

Proceed and press

OK to turn the screen off immediately. If you don’t

press any button, the screen will be off in 15 seconds.

Press any button on the remote or on the TV to turn

the screen on again.

Note: Screen Off option is not available if the Mode is set

to Game.

When the TV is not in use, please switch off or

disconnect the TV from the mains plug. This will also

reduce energy consumption.

Features

• Remote controlled colour TV

• Fully integrated digital terrestrial/cable/satellite TV

(DVB-T-T2/C/S-S2)

• HDMI inputs to connect other devices with HDMI

sockets

• USB input

• OSD menu system

• Stereo sound system

• Teletext

• Headphone connection

• Automatic programming system

• Manual tuning

• Automatic power down after up to eight hours.

• Sleep timer

• Child lock

• Automatic sound mute when no transmission.

• NTSC playback

• AVL (Automatic Volume Limiting)

• PLL (Frequency Search)

• PC input

• Game Mode (Optional)

• Picture off function

• Ethernet (LAN) for Internet connectivity and service

• 802.11 a/b/g/n built in WLAN Support

• Audio Video Sharing

• HbbTV

Ultra HD (UHD)

TV supports Ultra HD (Ultra High Definition - also

known as 4K) which provides resolution of 3840 x

2160 (4K:2K). It equals 4 times the resolution of Full

HD TV by doubling the pixel count of the Full HD TV

both horizontally and vertically. Ultra HD contents are

supported from HDMI, USB inputs and over DVB-T2

and DVB-S2 broadcasts.

English - 6 -

High Dynamic Range (HDR) / Hybrid Log-Gamma

(HLG)

Using this feature the TV can reproduce greater

dynamic range of luminosity by capturing and then

combining several different exposures. HDR/HLG

promises better picture quality thanks to brighter, more

realistic highlights, more realistic colour and other

improvements. It delivers the look that filmmakers

intended to achieve, showing the hidden areas of

dark shadows and sunlight with full clarity, colour and

detail. HDR/HLG contents are supported via native

and market applications, HDMI, USB inputs and over

DVB-S broadcasts. Set the related HDMI source

input as Enhanced from the Sources option in the

Settings>System menu in order to watch HDR/HLG

content, if the HDR/HLG content is received through

an HDMI input. The source device should also be at

least HDMI 2.0a compatible in this case.

Accessories Included

• Remote Control

• Batteries: 2 x AA

• Instruction Book

• Detachable stand

• Stand mounting screws (M4 x 12)

Standby Notifications

If the TV does not receive any input signal (e.g. from

an aerial or HDMI source) for 3 minutes, it will go

into standby. When you next switch-on, the following

message will be displayed: “TV switched to stand-by

mode automatically because there was no signal

for a long time.”

The Auto TV OFF option(in the Settings>System

>More menu) could have been set to a value between

1 and 8 hours by default. If this setting is not set as Off

and the TV has been left on and not been operated

during the set time, it will switch into standby mode

after the set time has expired. When you next switch-on

the TV, the following message will be displayed. “TV

switched to stand-by mode automatically because

no operation was made for a long time.” Before the

TV switches into standby mode a dialogue window will

be displayed. If you do not press any button the TV

will switch into the standby mode after a waiting period

of about 5 minutes. You can highlight Yes and press

OK to switch the TV into standby mode immediately.

If you highlight No and press OK, the TV will remain

on. You can also choose to cancel the Auto TV OFF

function from this dialogue. Highlight Disable and

press OK, the TV will remain on and the function will

be cancelled. You can enable this function again by

changing the setting of the Auto TV OFF option from

the Settings>System>More menu.

TV Control & Operation

P+

V+

V-

P-

The joystick allows you to control the Volume /

Programme / Source and Standby-On functions of

the TV.

Note: The position of the joystick may differ depending on

the model.

, switch is used for turning the TV on or off.

Note: The position of the power switch may differ depending

on the model.

To change volume: Increase the volume by pushing

the joystick right. Decrease the volume by pushing

the joystick left.

To change channel: Scroll through the stored

channels by pushing the joystick up or down.

To change source: Press the centre of the joystick

in, the sources list will appear on the screen. Scroll

through the available sources by pushing the joystick

up or down.

To turn the TV off: Press the centre of the joystick in

and hold it down for a few seconds, the TV will turn

into standby mode.

To turn on the TV: Press the centre of the joystick in,

the TV will turn on.

Note: Main menu OSD cannot be displayed via joystick.

Operation with the Remote Control

Press the Home button on your remote control to

display main menu. Use the directional buttons and

OK button to navigate and set. Press Return/Back

or Home button to quit a menu screen.

English - 7 -

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources. Press the

Source button on your remote control consecutively

to select the different sources.

Changing Channels and Volume

You can change the channel and adjust the volume

by using the Programme +/- and Volume +/- buttons

on the remote.

Using Main TV Menu

When the Home button is pressed, the main TV

menu will appear at the bottom of the screen. You can

navigate through the menu items using the directional

buttons on the remote. To select an item or see the

sub-menu options of the highlighted menu press OK

button. When you highlight a menu option some of the

sub-menu items of this menu may appear on the upper

side of the menu bar for quick access. To use a quick

access item highlight it, press OK and set as desired

using the Left/Right directional buttons. When finished

press OK or Back/Return button to exit.

Press EXIT button to close the main menu.

1. Home

When main menu is opened Home menu bar will

be highlighted. The content of the Home menu can

be customised by adding options from other menus.

Just highlight an option and press the Down direction

button on the remote. If you see Add to Home option

you can add it to the Home menu. Same way you

can delete or change the position of any item in the

Home menu. Press the Down direction button and

select Delete or Move option and press OK. In order

to move a menu item use the Right and Left direction

buttons to select the position that you want the item

to move to and press OK.

2. TV

2.1. Guide

You can access the electronic programme guide menu

using this option. Refer to Electronic Programme

Guide section for more information.

2.2. Channels

You can access the Channels menu using this option.

Refer to Using the Channel List section for more

information.

2.3. Timers

You can set timers for future events using the options of

this menu. You can also review the previously created

timers under this menu.

To add a new timer select the Add Timer tab using the

Left/Right buttons and press OK. Set the sub-menu

options as desired and when finished press OK. A new

timer will be created.

To edit a previously created timer, highlight that timer,

select the Edit Selected Timer tab and press OK.

Change the sub-menu options as desired and press

OK to save your settings.

To cancel an already set timer, highlight that timer,

select Delete Selected Timer tab and press OK. A

confirmation message will be displayed. Highlight Yes

and press OK to proceed. The timer will be cancelled.

It is not possible to set timers for two or more events

that will broadcasted in different channels at the same

time interval. In this case you will be asked to choose

one of these timers and cancel others. Highlight the

timer you want to cancel and press OK, Options menu

will be displayed. Then highlight Set/Cancel and press

OK to cancel that timer. You will have to save changes

after that. In order to do that press OK, highlight Save

Changes and press OK again.

3. Settings

You can manage the settings of your TV using the op

-

tions of this menu. Refer to Settings Menu Contents

section for more information.

4. Apps

When your TV is connected to the Internet related

contents will also be available, including Apps related

contents. Using the Apps menu you can access and

manage your applications. You can add new apps from

the market or delete the existing ones. Refer to Apps

section for more information.

5. Sources

You can manage your input source references using

the options of this menu. To change the current source

highlight one of the options and press OK.

5.1. Source Settings

     

   Regular, Enhanced and

Regular

and Enhanced

of the selected HDMI source. To be able to watch 4K or



Enhanced



Regular



.

English - 8 -

Inserting the Batteries into the Remote

Remove the back cover to reveal the battery compart

-

ment. Insert two size AA batteries. Make sure the (+)

and (-) signs match (observe correct polarity). Do not

mix old and new batteries. Replace only with same or

equivalent type. Place the cover back on.

A message will be displayed on the screen when the

batteries are low and must be replaced. Note that when

the batteries are low, the performance of the remote

control may be impaired.

Batteries should not be exposed to excessive heat

such as sunshine, fire or the like.

Power Connection

IMPORTANT: The TV set is designed to operate on a

220-240V AC, 50 Hz supply. After unpacking, allow the

TV set to reach the ambient room temperature before

you connect the set to the mains. Plug the power cable

to the mains socket outlet.

Antenna Connection

Connect the aerial or cable TV plug to the AERIAL

INPUT (ANT-TV) socket or satellite plug to the

SATELLITE INPUT (ANT SAT) socket located on the

rear side of the TV.

Rear side of the TV

1

2

ANT SAT

ANT-TV

1. Satellite

2. Aerial or cable

If you want to connect a device to the TV, make

sure that both the TV and the device are turned off

before making any connection. After the connection

is done, you can turn on the units and use them.

License Notification

The terms HDMI and HDMI High-Definition Multimedia

Interface, and the HDMI Logo are trademarks or

registered trademarks of HDMI Licensing Administrator,

Inc. in the United States and other countries.

Manufactured under license from Dolby Laboratories.

Dolby, Dolby Audio and the double-D symbol are

trademarks of Dolby Laboratories.

YouTube and the YouTube logo are trademarks of

Google Inc.

This product contains technology subject to certain

intellectual property rights of Microsoft. Use or

distribution of this technology outside of this product

is prohibited without the appropriate license(s) from

Microsoft.

Content owners use Microsoft PlayReady™ content

access technology to protect their intellectual property,

including copyrighted content. This device uses

PlayReady technology to access PlayReady-protected

content and/or WMDRM-protected content. If the

device fails to properly enforce restrictions on content

usage, content owners may require Microsoft to revoke

the device’s ability to consume PlayReady-protected

content. Revocation should not affect unprotected

content or content protected by other content access

technologies. Content owners may require you to

upgrade PlayReady to access their content. If you

decline an upgrade, you will not be able to access

content that requires the upgrade.

The “CI Plus” Logo is a trademark of CI Plus LLP.

This product is protected by certain intellectual property

rights of Microsoft Corporation. Use or distribution of

such technology outside of this product is prohibited

without a license from Microsoft or an authorized

Microsoft subsidiary.

English - 9 -

Disposal of Old Equipment and Batteries

Only for European Union and

countries with recycling systems

These symbols on the products,

packaging, and/or accompanying

documents mean that used electrical and

electronic products and batteries must not

be mixed with general household waste.

For proper treatment, recovery and

recycling of old products and used

batteries, please take them to applicable

collection points in accordance with your

national legislation.

By disposing of them correctly, you will

help to save valuable resources and

   

on human health and the environment.

For more information about collection

and recycling, please contact your local

municipality.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

Note for the battery symbol:

This symbol might be used in combination

with a chemical symbol. In this case it

complies with the requirement set by the

Directive for the chemical involved.

Declaration of Conformity (DoC)

Hereby, Panasonic Marketing Europe GmbH, declares

that this TV is in compliance with the essential require

-

ments and other relevant provisions of the Directive

2014/53/EU.

If you want to get a copy of the original DoC of this TV,

please visit the following website:

http://www.ptc.panasonic.eu/doc

Authorized Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

Web Site: http://www.panasonic.com

English - 10 -

Specification

TV Broadcasting

PAL BG/I/DK

SECAM BG/DK

Receiving Channels VHF (BAND I/III) - UHF (BAND U) - HYPERBAND

Digital Reception





Number of Preset

Channels

11 000

Channel Indicator On Screen Display

RF Aerial Input 75 Ohm (unbalanced)

Operating Voltage 220-240V AC, 50Hz.

Audio A2 Stereo+Nicam Stereo

Headphone 3.5 mm mini stereo jack

Audio Output Power

(WRMS.) (10% THD)

2 x 10 W

Networked Standby

Power Consumption

(W)

< 2

TX-43FXW554 TX-49FXW554 TX-55FXW554

Power Consumption

(W)

120 W 120 W 140 W

Weight (kg) 10 Kg 12.2 Kg 15.5 Kg

TV Dimensions

DxLxH (with stand)

(mm)

235 x 970 x 612 235 x 1105 x 688 235 x 1243 x 767

TV Dimensions

DxLxH (without

stand) (mm)

43/74 x 970 x 567 43/74 x 1105 x 642 43/75 x 1243 x 721

 16/9 43” 16/9 49” 16/9 55”

Operation

temperature and

operation humidity

0ºC up to 40ºC, 85% humidity max

English - 11 -

Wireless LAN Transmitter Specifications

Frequency Ranges Max Output Power

2400 - 2483,5 MHz (CH1-CH13) < 100 mW

5150 - 5250 MHz (CH36 - CH48) < 200 mW

5250 - 5350 MHz (CH52 - CH64) < 200 mW

5470 - 5725 MHz (CH100 -

CH140)

< 200 mW

Country Restrictions

This device is intended for home and office use in all

EU countries (and other countries following the rele

-

vant EU directive) without any limitation except for the

countries mentioned below.

Country Restriction

Bulgaria

General authorization required for outdoor

use and public service

France In-door use only for 2454-2483.5 MHz

Italy

If used outside of own premises, general

authorization is required

Greece

In-door use only for 5470 MHz to 5725

MHz band

Luxembourg

General authorization required for network

and service supply(not for spectrum)

Norway

Radio transmission is prohibited for the

geographical area within a radius of 20 km

from the centre of Ny-Ålesund

Russian Fed

-

eration

In-door use only

The requirements for any country may change at any

time. It’s recommended that user checks with local

authorities for the current status of their national reg-

ulations for both 2.4 GHz and 5 GHz wireless LAN’s.

Standard

IEEE 802.11.a/b/g/n

Host Interface

USB 2.0

Security

WEP 64/128, WPA, WPA2, TKIP, AES, WAPI

Notice

DVB / Data broadcasting

• This TV is designed to meet the standards (as of

August, 2017) of DVB-T / T2 (MPEG2, MPEG4-

AVC(H.264) and HEVC(H.265)) digital terrestrial

services, DVB-C (MPEG2, MPEG4-AVC(H.264)

and HEVC(H.265)) digital cable services and DVB-S

(MPEG2, MPEG4-AVC(H.264) and HEVC(H.265))

digital satellite services.

Consult your local dealer for availability of DVB-T /

T2 or DVB-S services in your area.

Consult your cable service provider for availability of

DVB-C services with this TV.

• This TV may not work correctly with the signal which

does not meet the standards of DVB-T / T2, DVB-C

or DVB-S.

• Not all the features are available depending on the

country, area, broadcaster, service provider, satellite

and network environment.

• Not all CI modules work properly with this TV. Consult

your service provider about the available CI module.

• This TV may not work correctly with CI module that

is not approved by the service provider.

• Additional fees may be charged depending on the

service provider.

• The compatibility with future services is not

guaranteed.

English - 12 -

Remote Control

EXIT

LANG.LANG.

E

M

O

H

BACK

G

1

2

1

3

4

5

21

6

10

7

9

8

11

12

13

14

15 16

17

18

19

20

22

23

24

25

1. Standby: Switches On / Off the TV

2. Info: Displays information about on-screen content,

shows hidden information (reveal - in TXT mode)

3. Guide: Displays the electronic programme guide

4. Home: Displays TV menu

5. Directional buttons: Helps navigate menus,

content etc. and displays the subpages in TXT

mode when pressed Right or Left

6. OK: Confirms user selections, holds the page (in

TXT mode), views Channels menu (DTV mode)

7. Exit: Closes and exits from displayed menus or

returns to previous screen

8. Coloured Buttons: Follow the on-screen instruc-

tions for coloured button functions

9. Volume +/-

10. Mute: Completely turns off the volume of the TV

11. Numeric buttons: Switches the channel, enters

a number or a letter in the text box on the screen,

switches the TV on when in standby mode

12. Language: Switches among sound modes (an-

alogue TV), displays and changes audio/subtitle

language and turns subtitles on or off (digital TV,

where available)

13. Rewind: Moves frames backwards in media such

as movies

14. Stop: Stops the media being played

15. Play: Starts to play selected media

16. Pause: Pauses the media being played

17. No function

18. Fast Forward: Moves frames forward in media

such as movies

19. Text: Displays teletext (where available), press

again to superimpose the teletext over a normal

broadcast picture (mix)

20. Programme +/-: Programme up-down, Page up-

down (in TXT mode), switches the TV on when in

standby mode

21. Back/Return: Returns to previous screen, previous

menu, opens index page (in TXT mode)

22. My Button 2 (*)

23. Netflix: Launches the Netflix application

24. My Button 1 (*)

25. Source: Shows available broadcast and content

sources

(*) MY BUTTON 1 & MY BUTTON 2:

These buttons may have default functions depending

on the model. However you can set a special function to

these buttons by pressing on them for five seconds when

on a desired source or channel. A confirmation message

will be displayed on the screen. Now the selected My

Button is associated with the selected function.

Note that if you perform First Time Installation, My

Button 1&2 will return to their default function.

English - 13 -

Connections

Connector Type Cables Device

VGA

Connection

(back)

AUDIO IN

PC/YPbPr

Audio

Connection

(back)

YPbPr/PC Audio Cable

HDMI

Connection

(side&back)

SPDIF

(Optical Out)

Connection

(back)

BACK AV

Back AV

(Audio/Video)

Connection

(back)

Audio Video Cable

HEADPHONE

Headphone

Connection

(side)

YPBPR

YPbPr Video

Connection

(back)

PC to YPbPr Connection Cable

USB

Connection

(side)

CI

Connection

(side)

CAM

module

LAN

Ethernet

Connection

(back)

LAN / Ethernet Cable

See the illustrations on the left

side. You can use YPbPr to VGA

cable to enable YPbPr signal via

VGA input. You cannot use VGA

and YPbPr at the same time. To

enable PC/YPbPr audio, you will

need to use the back audio inputs

with a YPbPr/PC audio cable for

audio connection. When using

the wall mounting kit (available

from a third party in the market,

if not supplied), we recommend

that you plug all your cables into

the back of the TV before mounting

on the wall. Insert or remove the

CI module only when the TV is

SWITCHED OFF. You should refer

to the module instruction manual

for details of the settings. The/

Each USB input of your TV supports

devices up to 500mA. Connecting

devices that have current value

above 500mA may damage your

TV. When connecting equipment

using a HDMI cable to your TV,

to guarantee sufficient immunity

against parasitic frequency radiation

and trouble-free transmission of

high definition signals, such as 4K

content, you have to use a high

speed shielded (high grade) HDMI

cable with ferrites.

If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making

any connection. After the connection is done, you can turn on the units and use them.

English - 14 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a

wall socket (220-240V AC, 50 Hz). Turn on the main

switch “

” located on the TV - position “|”. The TV

will switch into standby mode and the standby LED

will light up.

Note: Main switch position may differ depending on the model.

To switch on the TV from standby mode either:

• Press the Standby button, Programme +/- or a

numeric button on the remote control.

• Press the centre of the joystick on the TV in or push

it up/down.

To Switch the TV Off

Press the Standby button on the remote control or

press the centre of the joystick on the TV in and hold

it down for a few seconds, the TV will switch into

standby mode.

Turn off the main switch “

” located on the TV -

position 2

. The TV will switch off.

To power down the TV completely, unplug the

power cord from the mains socket.

Note: When the TV is switched into standby mode, the standby

LED can blink to indicate that features such as Standby

Search, Over Air Download or Timer is active. The LED can

also blink when you switch on the TV from standby mode.

First Time Installation

When turned on for the first time, the language

selection screen is displayed. Select the desired

language and press OK. In the following steps of

the installation guide, set your preferences using the

directional buttons and OK button.

On the second screen set your country preference.

Depending on the Country selection you may be asked

to set and confirm a PIN at this point. The selected PIN

cannot be 0000. You have to enter it if you are asked

to enter a PIN for any menu operation later.

You can activate Store Mode option in the next step.

This option will configure your TV’s settings for store

environment and depending on the TV model being

used, the supported features of it may be displayed on

the side of the screen as an info banner. This option

is intended only for store use. It is recommended to

select Home Mode for home use. This option will be

available in Settings>System>More menu and can

be turned off/on later. Make your selection and press

OK to continue.

Depending on the model of your TV and the country

selection Privacy Settings menu may appear at

this point. Using this menu you can set your privacy

privileges. Highlight a feature and use Left and

Right directional buttons to enable or disable. Read

the related explanations displayed on the screen

for each highlighted feature before making any

changes. You can use Programme +/- buttons to

scroll up and down to read the entire text. You will

be able to change your preferences at any time

later from the Settings>System>Privacy Settings

menu. If the Internet Connection option is disabled

Network/Internet Settings screen will be skipped

and not displayed. If you have any questions,

complaints or comments regarding this privacy

policy or its enforcement, please contact by email at

[email protected].

Next and press OK button on the remote

control to continue and the Network/Internet Settings

menu will be displayed. Please refer to 





Wake On

as OffNext

and press OK

On next screen you can set broadcast types to be

searched, set your encrypted channel searching

and time zone (depending on the country selection)

preferences. Additionally you can set a broadcast

type as your favourite one. Priority will be given to the

selected broadcast type during the search process

and the channels of it will be listed on the top of the

channel list. When finished, highlight Next and press

OK to continue.

About Selecting Broadcast Type

To turn a search option for a broadcast type highlight

it and press OK. The checkbox next to the selected

option will be checked. To turn the search option off

clear the checkbox by pressing OK after moving the

focus on the desired broadcast type option.

Digital Aerial: If D. Aerial broadcast search option

is turned on, the TV will search for digital terrestrial

broadcasts after other initial settings are completed.

Digital Cable: If D. Cable broadcast search option

is turned on, the TV will search for digital cable

broadcasts after other initial settings are completed.

A message will be displayed before starting to search

asking if you want to perform cable network search. If

you select Yes and press OK you can select Network

or set values such as Frequency, Network ID and

Search Step on the next screen. If you select No

and press OK you can set Start Frequency, Stop

Frequency and Search Step on the next screen.

When finished, highlight Next and press OK button

to continue.

Note: Searching duration will change depending on the

selected Search Step.

Satellite: If Satellite broadcast search option is turned

on, the TV will search for digital satellite broadcasts

after other initial settings are completed. Before

satellite search is performed some settings should be

English - 15 -

made. Antenna Type menu will be displayed first. You

can select Antenna Type as Direct, Single Satellite

Cable or DiSEqC switch by using Left or Right

buttons. After selecting your antenna type press OK to

see the options to proceed. Continue, Transponder

list and Configure LNB options will be available. You

can change the transponder and LNB settings using

the related menu options.

• Direct: If you have a single receiver and a direct

satellite dish, select this antenna type. Press OK to

    

screen and press OK to scan for services.

• Single Satellite Cable: If you have multiple

receivers and a single satellite cable system, select

this antenna type. Press OK to continue. Configure

settings by following instructions on the next screen.

Press OK to scan for services.

• DiSEqC switch: If you have multiple satellite dishes

and a DiSEqC switch, select this antenna type. Then

set the DiSEqC version and press OK

You can set up to four satellites (if available) for

version v1.0 and sixteen satellites for version v1.1

on the next screen. Press OK button to scan the first

satellite in the list.

Analogue: If Analogue broadcast search option is

turned on, the TV will search for analogue broadcasts

after other initial settings are completed.

After the initial settings are completed TV will start

to search for available broadcasts of the selected

broadcast types.

While the search continues current scan results will

be displayed at the bottom of the screen. After all the

available stations are stored, Channels menu will be

displayed. You can edit the channel list according to

your preferences using the Edit tab options or press

the Home button to quit and watch TV.

While the search continues a message may appear,

asking whether you want to sort channels according

to the LCN(*). Select Yes and press OK to confirm.

(*) LCN is the Logical Channel Number system that organizes

available broadcasts in accordance with a recognizable

channel number sequence (if available).

Note: Do not turn off the TV while initializing first time

installation. Note that, some options may not be available

depending on the country selection.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (HDD with external power

supply) external hard disk drives or USB memory stick to your

TV by using the USB inputs of the TV.

IMPORTANT! Back up the files on your storage devices

before connecting them to the TV. Manufacturer will

not be responsible for any file damage or data loss.

Certain types of USB devices (e.g. MP3 Players)

or USB hard disk drives/memory sticks may not be

compatible with this TV. The TV supports FAT32 and

NTFS disk formatting.

Wait a little while before each plugging and unplugging

as the player may still be reading files. Failure to do

so may cause physical damage to the USB player

and the USB device itself. Do not pull out your drive

while playing a file.

You can use USB hubs with your TV’s USB inputs.

External power supplied USB hubs are recommended

in such a case.

It is recommended to use the TV’s USB input(s)

directly, if you are going to connect a USB hard disk.

Note: When viewing image files the Media Browser menu

can only display 1000 image files stored on the connected

USB device.

Media Browser

You can play back music and movie files and display

photo files stored on a USB storage device by

connecting it to your TV. Connect a USB storage device

to one of the USB inputs located on the side of the TV.

After connecting a USB storage device to your TV

Media Browser menu will be displayed on the screen.

You can access the content of the connected USB

device any time later from the Sources menu. Select

the related USB input option from this menu and press

OK. Then select the file of your choice and press OK

to display or play it back.

You can set your Media Browser preferences by using

the Settings menu. Settings menu can be accessed

via the information bar which is displayed on the

bottom of the screen when pressed the Info button

while playing back a video file or displaying a picture

file. Press the Info button, highlight the gear wheel

symbol positioned on the right side of the information

bar and press OK. Picture Settings, Sound Settings,

Media Browser Settings and Options menus will be

available. The contents of these menus may change

according to the type of the currently open media file.

Only Sound Settings menu will be available while

playing back audio files.

Loop/Shuffle Mode Operation

Start playback and activate

All files in the list will be

continuously played in

original order

Start playback and activate

The same file will be

played continuously

(repeat)

Start playback and activate

All files in the list will be

played once in random

order

Start playback and activate

,

All files in the list will be

continuously played in

the same random order

To use the functions on the information bar highlight the

symbol of the function and press OK. To change the

status of a function highlight the symbol of the function

English - 16 -

and press OK as much as needed. If the symbol is

marked with a red cross, that means it is deactivated.

CEC

This function allows to control the CEC-enabled

devices, that are connected through HDMI ports by

using the remote control of the TV.

The CEC option in the Settings>System>More menu

should be set as Enabled at first. Press the Source

button and select the HDMI input of the connected

CEC device from the Sources List menu. When

new CEC source device is connected, it will be listed

in source menu with its own name instead of the

connected HDMI ports name(such as DVD Player,

Recorder 1 etc.).

The TV remote is automatically able to perform the

main functions after the connected HDMI source has

been selected. To terminate this operation and control

the TV via the remote again, press and hold the “0-

Zero” button on the remote control for 3 seconds.

You can disable the CEC functionality by setting the

related option under the Settings>System>More

menu accordingly.

The TV supports ARC (Audio Return Channel). This

feature is an audio link meant to replace other cables

between the TV and an audio system (A/V receiver or

speaker system).

When ARC is active, the TV does not mute its other

audio outputs automatically. You will need to decrease

TV volume to zero manually if you wish to hear the

ARC audio only (same as optical or co-axial digital

audio outputs). If you want to change connected

device’s volume level, you should select that device

from the source list. In that case volume control keys

are directed to connected audio device.

Note: ARC is supported only via the HDMI2 input.

System Audio Control

Allows an Audio Amplifier/Receiver to be used with

the TV. The volume can be controlled using the

remote control of the TV. To activate this feature set

the Speakers option in the Settings>System>More

menu as Amplifier. The TV speakers will be muted

and the sound of the watched source will be provided

from the connected sound system.

Note: The audio device should support System Audio Control

feature and CEC option should be set as Enabled.

English - 17 -

Settings Menu Contents

Picture Menu Contents

Mode

You can change the picture mode to suit your preference or requirements. Picture mode can

be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural.

Contrast

Adjusts the light and dark values on the screen.

Brightness

Adjusts the brightness values on the screen.

Sharpness

Sets the sharpness value for the objects displayed on the screen.

Colour

Sets the colour value, adjusting the colours.

Energy Saving

For setting the Energy Saving to Custom, Minimum, Medium, Maximum, Auto,

Screen Off or Off.

Note: Available options may differ depending on the selected Mode.

Backlight

This setting controls the backlight level. The backlight function will be inactive if the

Energy Saving is set to an option other than Custom.

Advanced Settings

Dynamic

Contrast

You can change the dynamic contrast ratio to desired value.

Noise Reduction

If the signal is weak and the picture is noisy, use the Noise Reduction setting to reduce

the amount of noise.

Colour Temp

Sets the desired colour temperature value. Cool, Normal, Warm and Custom options

are available.

White Point

If the Colour Temp option is set as Custom, this setting will be available. Increase the

‘warmth’ or ‘coolness’ of the picture by pressing Left or Right buttons.

Picture Zoom

Sets the desired image size format.

Picture Shift

This option may be available depending on the Picture Zoom setting. Highlight and

press OK, then use directional buttons to shift the picture upwards or downwards.

Film Mode

Films are recorded at a different number of frames per second to normal television programmes.

Turn this feature on when you are watching films to see the fast motion scenes clearly.

Skin Tone

Skin tone can be changed between -5 and 5.

Colour Shift

Adjust the desired colour tone.

HDMI Full Range

While watching from a HDMI source, this feature will be visible. You can use this feature

to enhance blackness in the picture.

PC Position

Appears only when the input source is set to VGA/PC.

Autoposition

Automatically optimizes the display. Press OK to optimize.

H Position

This item shifts the image horizontally to the right hand side or left hand side of the screen.

V Position

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock

Dot Clock adjustments correct the interference that appear as vertical banding in dot

intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase

Depending on the input source(computer etc.) you may see a hazy or noisy picture on

the screen. You can use phase to get a clearer picture by trial and error.

Reset

Resets the picture settings to factory default settings (except Game mode).

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture menu

while in PC mode.

English - 18 -

Sound Menu Contents

Volume

Adjusts the volume level.

Equalizer

Selects the equalizer mode. Custom settings can be made only when in User mode.

Balance

Adjusts whether the sound comes from the left or right speaker.

Headphone

Sets headphone volume.

Please ensure before using headphones that the headphone volume is set to a low

level, to prevent damage to your hearing.

Sound Mode

You can select a sound mode (If the viewed channel supports).

AVL (Automatic

Volume Limiting)

Sets the sound to obtain fixed output level between programmes.

Headphone/Lineout

When you connect an external amplifier to your TV using the headphone jack, you can

select this option as Lineout. If you have connected headphones to the TV, set this

option as Headphone.

Please ensure before using headphones that this menu item is set to Headphone. If it

is set to Lineout, the output from the headphone socket will be set to maximum which

could damage your hearing.

Dynamic Bass

Enables or disables the Dynamic Bass.

Surround sound

Surround sound mode can be changed as On or Off.

Digital Out

Sets digital out audio type.

English - 19 -

Network Menu Contents

Network Type

Disable the network connection or change the connection type.

Scan Wireless

Networks

Start a search for wireless networks. This option will be available if the Network Type

is set as Wireless Device.

Press WPS on your

wifi router

If your modem/router device has WPS, you can directly connect to it using this option.

Highlight this option and press OK. Go to your modem/router device and press the

WPS button on it to make the connection. This option will be available if the Network

Type is set as Wireless Device.

Internet Speed Test

Start a speed test to check your connection bandwidth. The result will be displayed on

the screen when finished.

Advanced Settings

Change the IP and DNS configurations of your TV.

Wake On

Enable or disable this feature by setting it as On or Off.

Note: For detailed information on the options of this menu refer to the Connectivity section.

Installation Menu Contents

Automatic channel

scan (Retune)

Displays automatic tuning options. D. Aerial: Searches and stores aerial DVB stations.

D. Cable: Searches and stores cable DVB stations. Analogue: Searches and stores

analogue stations. 

Manual channel

scan

This feature can be used for direct broadcast entry.

Network channel

scan

Searches for the linked channels in the broadcast system. D. Aerial: Searches for aerial

network channels. D. Cable: Searches for cable network channels. Satellite: Searches

for satellite network channels.

Analogue fine tune

You can use this setting for fine tuning analogue channels. This feature is not available

if no analogue channels are stored and if currently watched channel is not an analogue

channel.

Satellite Settings

Displays satellite settings. Satellite list: Displays available satellites. You can Add,

Delete satellites or Edit satellite settings on the list. Antenna installation: You can

change satellite antenna settings and/or start a satellite scan.

Installation Settings

(optional)

Displays installation settings menu. Standby Search (*): Your TV will search for new or

missing channels while in standby. Any new found broadcasts will be shown. Dynamic

Channel Update(*): If this option is set as Enabled, the changes on the broadcasts

such as frequency, channel name, subtitle language etc., will be applied automatically

while watching.

(*) Availability depends on model.

Clear Service List

Use this setting to clear channels stored. This setting is visible only when the Country

option is set to Denmark, Sweden, Norway or Finland.

Select Active

Network

This setting allows you to select only the broadcasts within the selected network to be

listed in the channel list. This feature is available only for the country option of Norway.

Signal Information

You can use this menu item to monitor signal related information such as signal level/

quality, network name etc for available frequencies.

First time installation

Deletes all stored channels and settings, resets TV to factory settings.

La page charge ...

Panasonic TX-49FXW554 Le manuel du propriétaire

Ce manuel convient également à

Panasonic TX-49FXW554 Le manuel du propriétaire

dans d''autres langues

Documents connexes