Siemens TE502206RW/07 Manuel utilisateur

siemens-home.com/welcome

Register

your

product

online

TE 502

en Instruction manual

fr Mode d’emploi

pl Instrukcjaobsługi

nl Gebruiksaanwijzing

cs Návodkpoužití

ru Инструкцияпоэксплуатации

E-Nr. ……… FD… …

siemens-home.com/welcome

Register

your

product

online

siemens-home.com/welcome

Register

your

product

online

TE 502

en Instruction manual

fr Mode d’emploi

pl ,QVWUXNFMDREVãXJL

nl *HEUXLNVDDQZLM]LQJ

cs 1iYRGNSRXçLWt

ru ǣȈȌȍȋȎȅȑȃȚȊȉȘȅȌȊȆ Ȏǻȍǻȑȃȃ

1

2

3 4

en

��2

fr

��22

pl

��43

nl

��64

cs

��86

ru

��106

Included in delivery (see page 4) / Contenu de l’emballage (voir page 24)

Zakres dostawy (patrz strona 45) / Leveringsomvang (zie pagina 66)

Součást dodávky (informace naleznete na straně 88)

Объем поставки (см. стр. 108)

A

9

11

12

13

14

15

16

17

1 2 3

10

4

5

6

78

DC

B

19

18

20

8e

8a 8b

8c

8d

6a

6c

6d

6e

6b

5d

5a

5b

E

5c

2

deen

Safety instructions

Please read and follow the operating instructions carefully and

keep them for later reference. Enclose these instructions when

you give this appliance to someone else. This appliance is

designed for the preparation of normal household quantities in

the home, or in household-like, non-commercial environments.

Household-like environments include staff kitchens in shops,

of ces, agricultural and other small businesses or for use by

guests at bed-and-breakfast establishments, small hotels and

similar residential facilities.

¡ Danger of electric shock!

Connect and operate the appliance only according to the type plate

speci cations. To avoid potential hazards, repairs such as replacing

a damaged cable must only be carried out by our customer service

personnel�

This appliance may be used by children aged 8 years and older and

by persons with reduced physical, sensory or mental capabilities

or who lack experience and/or knowledge if they are supervised or

have been given instruction in the safe use of the appliance and

have understood the dangers involved. Keep children under 8 years

of age away from the appliance and connecting cable and do not

allow them to use the appliance. Children shall not play with the

appliance� Cleaning and user maintenance shall not be made by

children unless they are older than 8 years and supervised.

Never immerse the appliance or mains cable in water� Use only if

power cord and appliance show no signs of damage� Should a fault

occur, pull the plug or disconnect from the mains immediately.

3

deen

¡ Risk of suffocation!

Do not allow children to play with packaging material�

¡ Risk of scalding!

The milk frother 6 for milk / hot water

gets very hot. After use, allow to

cool down rst before touching.

¡ Risk of injury!

Do not reach into the grinding unit.

4

deen

Dear Coffee Connoisseur.

Congratulations on purchasing this fully

automatic espresso machine from Siemens.

Included in delivery

See the illustration at the beginning of this

instruction manual.

1 Fully automatic espresso machine

TE502

2 Instruction manual

3 Water hardness testing strip

4 Measuring spoon

Table of Contents

Included in delivery �� 4

Overview��5

Controls ��5

- Power on/off switch O / I ��5

- e off / j button ��5

- h button ��5

- start button ��5

- “Coffee strength” rotary knob ��5

- “Drink selection” rotary knob ��6

- Milk frother ��6

Display messages ��6

Before using for the rst time��6

Water lter ��8

Menu settings ��9

- Shut off �� 9

- Filter ��9

- Start Calc‘n‘Clean ��9

- Temp. ��9

- Language ��9

- Water hardness �� 9

Adjusting the grinding unit ��10

Preparation using coffee beans �� 10

Preparation using ground coffee �� 11

Dispensing hot water �� 11

Preparing milk froth �� 11

Maintenance and daily cleaning ��12

- Cleaning the milk system ��13

- Cleaning the brewing unit��14

Tips on energy saving ��15

Service Programmes ��15

- Descaling ��16

- Cleaning ��17

- Calc‘n‘Clean ��17

Frost protection��18

Accessories ��19

Disposal �� 19

Guarantee��19

Technical data��19

Simple troubleshooting ��20

5

deen

Controls

Power on/off switch O / I

The power switch O / I (9) is used to switch

the appliance on or to switch it off fully

(power supply off).

Important: Before switching off, run the

cleaning programme or use the e off / j

button (12) to switch off.

e off / j button

When the e off / j button (12) is pressed

briey, the appliance rinses and switches

off� Pressing and holding down the e off / j

button (12) displays the user settings or

starts the descaling and cleaning function.

h button

Press the h button (11) to generate steam

for preparing milk froth�

start button

Press the start button (10) to begin drink

preparation or to start a service programme�

Press the start button (10) again during

drink preparation to cut the dispensing

process short�

“Coffee strength” rotary knob

This rotary knob (13) is used

to set the coffee strength�

h

to

g

Very mild

Mild

Mild +

Normal

Normal +

Strong

Overview

Figures A, B, C, D and E

1 Bean container

2 Aroma cover

3 Selector for grind setting

4 Drawer

(ground coffee/cleaning tablet)

5 Brewing unit (Fig. E)

a) Brewing unit

b) Door

c) Eject lever for brewing unit

d) Lock

6 Milk frother (Fig. C)

a) Steam valve

b) Metal sleeve

c) Frothing tube

d) Steam nozzle

e) Air hole

7 Coffee outlet, height-adjustable

8 Drip tray (Fig. D)

a) Drip tray panel

b) Coffee grounds container

c) Drip tray for coffee outlet

d) Grate for coffee outlet

e) Float

9 Power on/off switch O / I

10 start button

11 h button

12 e off / j button

13 “Coffee strength” rotary knob

14 “Drink selection” rotary knob

15 Display

16 Removable water tank

17 Lid for water tank

18 Measuring spoon

(insertion aid for water lter)

19 Storage compartment for

measuring spoon

20 Power cable with storage compartment

6

deen

“Drink selection” rotary knob

This rotary knob (14) is used

to select the required drink

and the per-cup quantity. It

is also used to change user

settings�

a

to

c

Small Espresso

Espresso

Small Café Crème

Café Crème

Large Café Crème

b

to

d

2 small Espresso

2 Espresso

2 small Café Crème

2Café Crème

2 large Café Crème

e

Rinse machine

f

Rinse milk system

N.B.: If a drink is selected that cannot be

prepared,

Invalid combination appears in

the display� Change the coffee strength or

the selected drink�

Milk frother

Pull the milk frother (6) out to open it and

push it back in to close it.

Display messages

The display (15) shows not only the current

operating status, but also various mes-

sages that give you status information or

let you know when you need to take action.

As soon as you have taken the necessary

action, the message disappears and the

menu for drink selection is displayed again.

Before using for the

rst time

General

Fill the water tank with fresh, cold, uncar-

bonated water only, and preferably use

only beans for fully automatic coffee and

espresso machines. Do not use coffee

beans that have been glazed, caramelised

or treated with other additives containing

sugar, since they will block the brewing unit.

The water hardness setting can be adjusted

on this appliance. The factory default setting

for the water hardness is 4� Check the

water hardness with the enclosed test strip�

If the check reveals a value other than 4,

change the setting on the appliance accord-

ingly after switching on (see “Menu settings”

Water hardness on page 9)�

Switching on the appliance

1� Remove the protective lm.

2� Place the fully automatic espresso

machine on a at, water-resistant

surface that can take its weight. Make

sure that the machine’s ventilation slots

remain unobstructured.

Important: Only use the appliance in

frost-free rooms� If the appliance has been

transported or stored at temperatures below

0 °C, wait at least 3 hours before operation.

7

deen

3� Pull the power cord out of the storage

compartment (20) and plug in. Adjust

the length of the cable by pushing it

back in or pulling it out. The easiest way

to do this is to place the appliance so

that its back is ush with the edge of the

counter and either pull the cable down-

ward or push it upward�

4� Install the milk frother� Operate the

machine only after the milk frother (6)

has been fully assembled and installed.

5� Lift the lid of the water tank (17)�

6� Remove and rinse the water tank (16)

and ll it with fresh cold water.

Do not ll above the max mark�

7� Replace the water tank (16) and push it

rmly downward into place.

8� Close the lid of the water tank (17)

again�

9� Fill the bean container (1) with coffee

beans. (For preparation using ground

coffee, see “Preparation using

ground coffee” on page 11.)

10� Press the power switch O / I (9). The

display (15) shows the menu for setting

the display language.

11� Select the required display language

with the upper rotary knob (14). The

following languages are available:

English Nederlands

Français Italiano

Svenska Español

Polski Magyar

Türkçe Dansk

Norsk Suomi

Português Čeština

ελληνικα български

русский

12� Press the start button (10). The

language you selected is saved. The

display shows

Pull milk frother�

13� Place a receptacle under outlet.

14� Carefully pull out the milk frother (6) to

open it. The appliance rinses out the

milk frother (6) with water. The display

shows

Push milk frother�

15� Push the milk frother (6) in to close it.

The appliance heats up and rinses. Some

water will run out of the coffee outlet.

When the drink selection menu is shown in

the display, the appliance is ready for use.

Switching off the appliance

If the appliance has not been used for

an hour, it rinses automatically and

then switches off (time span can be

programmed, see “Menu settings”

Shutoff

on page 9)�

Exception: The appliance switches off

without rinsing if only hot water or steam

were dispensed�

To switch the appliance off manually before

this, press the e off / j button (12). The

appliance rinses and switches off�

N.B.: If the appliance is being used for the

rst time, a service program has been run,

or the appliance has not been operated

for a long period, the rst beverage will

not have the full aroma and should not be

consumed.

When using the espresso machine for the

rst time, you will achieve a suitably thick

and stable “crema” only after the rst few

cups have been dispensed.

After extended use, water droplets may

form on the ventilation slots. This is normal.

8

deen

Water lter

A water lter can prevent scale buildup.

Before a new water lter is used, it must be

rinsed. To do this, proceed as follows:

1� Press the water lter rmly into the

water tank with the aid of the measuring

spoon (18)�

2� Fill the water tank (16) with water up to

the max mark�

3� Press and hold the e off / j button (12)

for at least three seconds. The menu

opens�

4� Press the e off / j button (12)

repeatedly until the display shows

No / Oldﬁlter�

5� Select Activate ﬁlter with the upper

rotary knob (14)�

6� Press the start button (10).

7� Place a receptacle with a capacity of

0.5 litres under the outlet.

8� Press the start button (10).

9� Pull the milk frother (6) to open it.

10� Water will now ow through the lter to

rinse it�

11� Push the milk frother (6) in to close it.

12� Empty the container.

The appliance is ready to use once more.

Note: Rinsing the lter simultaneously

activates the setting for the

Change ﬁlter!

display�

The lter is no longer effective when the

Change ﬁlter! display appears, or at

the latest after 2 months� It needs to be

replaced for reasons of hygiene and so that

there is no build-up of limescale (this could

damage the appliance)�

Replacement lters can be obtained from

retailers (TZ70003) or from customer

service (467873). If no new lter is used,

turn the

ﬁlter setting to No / Old�

Note: You can use the lter indicator to

mark the month in which you inserted the

lter. You can also mark the month in which

you will need to replace the lter next (at

the latest after two months)�

Note: If the appliance has not been used

for a prolonged period (e�g� vacation) the

lter should be rinsed before the appliance

is used again. To do so, dispense a cup of

hot water and pour it away.

9

deen

Menu settings

You can adapt the appliance to your

individual needs in the menu settings.

1� Hold the e off / j button (12) down for at

least 3 seconds�

2� Press the e off / j button (12) repeatedly

until the required menu item appears in

the display�

3� Select the required setting with the

upper rotary knob (14).

4� Conrm by pressing the start button

(10)�

To leave the menu without making any

changes, turn the rotary selector to Exit

and press the start button (10).

You can set the following:

Shut off

Here you can set the time span after which

the appliance automatically switches off

following the last drink preparation� A time

between 15 minutes and 4 hours can be

set. The default time is 1 hour, but this can

be shortened to save energy�

Filter

Here you can set whether a water lter is

being used. If a water lter is not being

used, turn the setting to No / Old� If a

water lter is being used, turn the setting to

Activate ﬁlter. New water lters have to

be rinsed before use (see “Water lter” on

page 8)�

Start Calc‘n‘Clean

The service programmes (Calc‘n‘Clean

/ descaling / cleaning) can be selected

manually here. Press the start button (10)

and run the selected programme (see “Ser-

vice Programmes” on page 15)�

Temp.

The brewing temperature (high / middle /

low) can be set here�

Language

The display language can be set here.

Water hardness

The water hardness setting can be adjusted

on this appliance� It is important to set the

water hardness correctly, so that the appli-

ance indicates accurately when the descal-

ing programme should be run. The factory

setting for the water hardness is 4�

You can check the water hardness using

the enclosed test strip or by asking your

local water supplier.

Dip the test strip briey in water, gently

shake off any drips, and check the result

after one minute.

Level Water hardness

German (°dH) French (°fH)

1

2

3

4

1-7

8-14

15-21

22-30

1-13

14-25

26-38

39-54

10

deen

Adjusting the

grinding unit

The rotary selector (3) adjusts the grind

settings from coarse to ne.

¡

Warning

Adjust the grinding unit only while it is

running! Otherwise the appliance may be

damaged� Do not reach into the grinding

unit.

● While the grinding unit is running, adjust

the rotary selector (3) from ne (a: Turn

anticlockwise) to coarse (b: Turn clock-

wise) as required.

a b

Note: The new setting will not become

apparent until after the second cup of

coffee�

Tip: For dark roast coffee beans, choose a

ner grind, for lighter beans a coarser grind.

Preparation using

coffee beans

This fully automatic espresso machine

grinds beans freshly for each brew�

Tip: If possible, use only beans for fully

automatic coffee and espresso machines.

For optimal quality, deep-freeze the beans

or store in a cool place in sealed containers�

Coffee beans can be ground while frozen.

Important: Fill the water tank (16) with

fresh water every day. The tank (16) should

always contain sufcient water for operating

the appliance�

Different coffee drinks can be prepared

quite simply at the press of a button.

Preparation

The appliance must be ready for use.

1� Place the pre-warmed cup(s) under the

coffee outlet (7).

Tip: For a small espresso, always pre-

heat the cup, e.g. using hot water.

2� Select the required coffee and the

required per-cup quantity by turning the

upper rotary knob (14). The selected

coffee and the per-cup quantity are

shown in the display�

3� Select the required coffee strength by

turning the lower rotary knob (13). The

selected coffee strength is shown in the

display�

4� Press the start button (10)�

The coffee is brewed and then dispensed

into the cup(s).

Press the start button (10) again to cut the

brewing process short�

11

deen

Preparation using

ground coffee

This fully automatic espresso machine can

also be operated with ground coffee (not

instant coffee powder)�

Important: Fill the water tank (16) with

fresh water every day. The tank (16) should

always contain sufcient water for operating

the appliance�

Preparation

1� Open the drawer (4)�

2� Pour in no more than 2 level measuring

spoons of ground coffee.

Warning: Do not use whole beans or

instant coffee�

3� Close the drawer (4)�

4� Select the required drink by turning the

upper rotary knob (14) (only one cup

possible)�

5� Press the start button (10)�

The coffee is brewed and then dispensed

into the cup.

N.B.: Repeat the procedure for another

cup of coffee. If no coffee is taken within

90 seconds, the brewing chamber empties

automatically to avoid overlling. The appli-

ance rinses�

Dispensing hot water

¡

Risk of burns

The milk frother (6) gets very hot. Hold the

milk frother (6) by the plastic part only�

The appliance must be ready for use with

the cleaned milk frother attached�

1� Place the pre-warmed cup or glass

under the outlet of the milk frother (6).

2� Pull the milk frother (6) to open it. The

appliance heats up. Hot water runs out

of the milk frother outlet (6) for about 40

seconds�

3� Stop the process by pushing in the milk

frother (6)�

Preparing milk froth

¡

Risk of burns

The milk frother (6) gets very hot. Hold the

milk frother (6) by the plastic part only�

Tip: You can foam the milk rst and then

dispense coffee, or foam the milk separately

and pour it onto the coffee.

The appliance must be ready for use with

the cleaned milk frother attached�

1� Press the h button (11).

The h button (11) ashes and the

appliance now heats up for approx.

20 seconds. The display then shows

Pull milk frother�

2� Immerse the milk frother so that it

reaches the bottom of a cup or glass

that is one-third lled with milk.

3� Pull the milk frother (6) to open it.

¡

Risk of scalding

Splashes of milk can scald. Do not touch

the outlet (6a) or aim it at anyone.

4� Close milk frother (6) by pushing it in.

Tip: For optimal milk froth quality, use cold

milk with a fat content of at least 1�5 % if

possible�

Important: Dried milk residue is difcult

to remove, so the milk frother (6) must be

cleaned with lukewarm water immediately

after use and rinse using the Rinse milk

system

programme (see page 13)�

12

deen

Maintenance and

daily cleaning

¡

Risk of electric shock

Unplug the appliance before cleaning it.

Never immerse the appliance in water�

Do not use a steam cleaner.

● Wipe the outside of the appliance with a

soft, damp cloth.

● Do not use abrasive cloths or cleaning

agents�

● Always remove any limescale, coffee,

milk or descaling uid residue immedi-

ately. Such residue can cause corrosion.

New sponge cloths may contain salts�

Salts can cause rust lm on stainless

steel and must therefore be washed out

thoroughly before use.

● Pull the drip tray (8c) with the coffee

grounds container (8b) forward and out.

Remove the panel (8a) and the grate

(8d). Empty and clean the drip tray and

coffee grounds container.

● Remove drawer (4) and clean�

● Remove the oat (8e) and clean with a

damp cloth�

K

Do not put the following items in the

dishwasher: drip tray panel (8a), oat

(8e), drawer (4), brewing unit (5a).

J

The following items are dishwasher-

safe: drip tray for coffee outlet (8c),

coffee grounds container (8b), grate for

coffee outlet (8d), aroma cover (2) and

measuring spoon (18).

● Wipe out the inside of the appliance (tray

holders and drawer)�

Important: Drip tray for coffee outlet (8c)

and coffee grounds container (8b) should

be emptied and cleaned daily to prevent

mould from developing.

N.B.: If the appliance is cold when switched

on with the power switch O / I (9) or if it

switches off automatically after coffee has

been dispensed, it rinses automatically. In

other words the system cleans itself�

Important: If the appliance has not been

used for a prolonged period of time (e.g.

after a vacation), clean the entire appliance

thoroughly, including the milk system and

brewing unit.

13

deen

Cleaning the milk system

If the milk system was not cleaned after

milk has been dispensed, after a certain

amount of time the message Rinse milk

system!

will appear on the display�

Clean the milk system immediately after use!

To pre-clean the milk system automatically:

1� Select

f

by turning the rotary knob (14).

2� Place a receptacle under the milk frother

(6)�

3� Press the start button (10).

4� Pull the milk frother (6) to open it. The

appliance now automatically lls the

receptacle with water. The rinse proce-

dure stops automatically after about 1

minute.

5� Push the milk frother (6) in to close it.

6� Let the milk frother (6) cool down�

7� Empty the receptacle and wipe dry the

outside of the milk frother (6).

In addition to this, clean the milk system

thoroughly at regular intervals (by hand or

in the dishwasher)�

Dismantling the milk system for cleaning:

1� To remove, take hold of the metal sleeve

and pull it downwards and off.

2� Twist the steam nozzle (6d) anticlock-

wise and remove it�

1

2

6d

3� Remove the frothing tube (6c).

6c

4� Clean the individual parts with a

detergent solution and a soft brush. If

necessary, soak in a warm detergent

solution. Clean the air hole (6e)

thoroughly.

6e

5� Rinse all parts with clean water and dry�

6� Fit the steam nozzle (6d) and frothing

tube

(6c) back into the metal sleeve�

1 2

6d6c

7� Twist the steam nozzle clockwise until

the marks are aligned�

14

deen

8� Attach the milk frother to the steam

valve� Check that the red mark on the

steam valve is covered�

¡

Risk of scalding

Only use the appliance when the milk

frother (6) is completely assembled and

tted.

Cleaning the brewing unit

Clean the brewing unit regularly.

To pre-clean the brewing unit automatically:

1� Select e by turning the rotary knob (14).

2� Place an empty glass under outlet (7).

3� Press the start button (10).

The appliance rinses.

In addition to the automatic cleaning

programme, the brewing unit (5a) should be

removed regularly for cleaning. (See gure

E at the start of the operating instructions.)

1� Switch the appliance off at the power

on/off switch O / I (9). No buttons are lit.

2� Open the door (5b) to the brewing unit.

3� Slide the red lock (5d) on the brewing

unit completely to the left.

4� Press the eject lever (5c) down fully. The

brewing unit is released.

5� Grasp the brewing unit (5a) by the

recessed grips and remove carefully.

6� Rinse the brewing unit (5a) thoroughly

under running water.

7� Hold the brewing unit sieve under the

running water.

Important: Do not clean with detergent or

other cleaning agents and do not put it in

the dishwasher�

8� Wipe out the inside of the appliance

thoroughly with a damp cloth and

remove any coffee residues.

9� Allow the brewing unit (5a) and the

inside of the appliance to dry�

10� Reinsert the brewing unit (5a) fully into

the appliance�

11� Press the eject lever (5c) up fully.

12� Slide the red lock (5d) fully to the right

and close the door (5b)�

15

deen

Tips on energy saving

● The fully automatic espresso machine

switches off automatically after one hour

(factory setting). The default time of

one hour can be shortened (see “Menu

settings – Shut off” on page 9)�

● Switch off the fully automatic espresso

machine when not in use. To do this,

press the e off / j (12) button. The appli-

ance rinses and switches off�

● If possible, do not interrupt coffee or milk

froth dispensing. Cutting the coffee or milk

froth dispensing process short results in

higher energy consumption and in more

residual water collecting in the drip tray.

● Descale the appliance regularly to avoid

a build-up of limescale. Limescale residue

results in higher energy consumption.

Service Programmes

Depending on usage, the following

messages will appear on the display at

certain intervals:

Descale required!

or

Clean required!

or

Calc‘n‘Clean required!

The appliance should be cleaned or des-

caled immediately using the corresponding

programme. You also have the option

of combining both processes with the

Calc‘n‘Clean function (see “Calc‘n‘Clean”

on page 17)� If the service programme is not

run as instructed, the appliance may be

damaged�

¡

Warning

Each time you run the service programme,

you should follow the instructions for using

the descaling and cleaning agents� Please

observe the safety instructions on the pack-

aging of the cleaning agent�

Never interrupt the service programme!

Do not drink the liquids!

Never use vinegar, vinegar-based products,

citric acid or citric acid-based products!

Never put descaling tablets or other descal-

ing agents in the ground coffee drawer or

the drawer for cleaning tablets (4)!

Specially developed descaling and

cleaning tablets are available from retail-

ers or customer service.

Order number Retail Customer

service

Cleaning

tablets

TZ60001 310575

Descaling

tablets

TZ60002 310967

16

deen

Descaling

Duration: approx. 25 minutes.

Important: If there is a lter in the water

tank (16), it needs to be removed before the

descaling programme is run.

If the message Descale required!

appears on the display, press the e off / j

button (12) for 3 seconds and then press

the start button (10). The descaling pro-

gramme will start�

To descale the appliance before being

prompted, press the e off / j button (12) for

at least 3 seconds. Then press the e off / j

button (12) briey twice. Turn the upper

rotary knob (14) until Start descaling

appears in the display�

To start the descaling procedure, press the

start button (10).

The display will guide you through the

programme�

Empty drip tray

Insert drip tray

● Empty drip tray (8) and replace them.

N.B.: If the water lter is activated, the

display will prompt you to remove the

lter and then press the start button (10)

again. Remove the lter now if you have

not already done so� Press the start button

(10)�

Fill descaler

Press start

● Pour lukewarm water into the empty

water tank (16) up to the 0,5l mark and

dissolve 2 Siemens descaling tablets in it�

● Press the start button (10).

Descale in progress

The descaling pro gramme will now run for

about 10 minutes.

Place container

Pull milk frother

● Place a receptacle with a capacity of at

least 0.5 litres under the outlet.

● Pull the milk frother (6) to open it.

Descale in progress

The descaling pro gramme will now run for

about 12 minutes.

Clean / Fill water tank

Press start

● Rinse the water tank (16) and rell it with

fresh water up to the max mark�

● Press the start button (10).

Descale in progress

The descaling pro gramme now runs for

about 30 seconds and rinses the appliance.

Push milk frother

● Push the milk frother (6) in to close it.

Descale in progress

The descaling pro gramme now runs for

about 1 minute.

Empty drip tray

Insert drip tray

● Empty drip tray (8) and replace them.

Replace the lter if one is being used. The

appliance has completed descaling and is

ready for use again.

Important: Wipe down the appliance using

a soft, damp cloth to immediately remove

any descaler residue. Such residue can

cause corrosion. New sponge cloths may

contain salts. Salts can cause rust lm

on stainless steel and must therefore be

washed out thoroughly before use.

La page charge ...

Siemens TE502206RW/07 Manuel utilisateur

Ce manuel convient également à

Siemens TE502206RW/07 Manuel utilisateur

dans d''autres langues