Nighthawk MK73 Mesh WiFi 6 System Manuel utilisateur

Taper
Manuel utilisateur
Quick Start
1
On your mobile phone,
download the Nighthawk app
and follow the setup instructions.
Tap the Security icon in your
Nighthawk app to verify that
NETGEAR Armor™ is activated.
Your Nighthawk comes with
NETGEAR Armor cybersecurity.
Armor blocks online threats like
hackers and phishing attempts
on your devices.
Check out everything you can
do on the Nighthawk app! Run
a speed test, pause the Internet,
see all the connected devices,
and more.
2
Download the
Nighthawk app
to install your
mesh system
Secure your
devices with
NETGEAR
Armor
3
Do more
with the app
Contents
Overview
Router Satellite x 2 Ethernet Cable
Power Adapter x 3
(varies by region)
1
LED
B
Internet Port
D
Reset Button
A
Ethernet Port
C
Power Connector
E
Sync Button
A
1
B C D E A C D E
Router SatelliteRouter or Satellite
Troubleshooting
If you’re having problems with the installation, try the following:
Turn off your modem and router and disconnect them. Reboot your modem. Reconnect your router to your
modem, and try installing with the Nighthawk app again.
If you’re still unable to install your router using the Nighthawk app, manually install it using the router web
interface.
Visit http://www.routerlogin.net to access the router web interface.
For more information, visit netgear.com/meshhelp.
Support and Community
Visit netgear.com/support to get your questions answered and access the
latest downloads.
You can also check out our NETGEAR Community for helpful advice at
community.netgear.com.
Si ce produit est vendu au Canada, vous pouvez accéder à ce document
en français canadien à https://www.netgear.com/support/download/.
(If this product is sold in Canada, you can access this document in
Canadian French at https://www.netgear.com/support/download/.)
For regulatory compliance information including the EU Declaration of
Conformity, visit https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power
supply.
For NETGEAR’s Privacy Policy, visit
https://www.netgear.com/about/privacy-policy.
By using this device, you are agreeing to NETGEAR’s Terms and
Conditions at https://www.netgear.com/about/terms-and-conditions. If
you do not agree, return the device to your place of purchase within your
return period.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134, USA
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo
are trademarks of NETGEAR, Inc. Any non-NETGEAR
trademarks are used for reference purposes only.
NETGEAR INTERNATIONAL LTD
Floor 1, Building 3,
University Technology Centre
Curraheen Road, Cork,
T12EF21, Ireland
June 2021
Regulatory and Legal
BETA DOCUMENTATION
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
For operation within 5.15 ~ 5.25GHz / 5.47 ~5.725GHz frequency range, it is restricted to
indoor environment. This device meets all the other requirements specified in Part 15E,
Section 15.407 of the FCC Rules.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 22cm
between the radiator & your body.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Nighthawk MK73 Mesh WiFi 6 System Manuel utilisateur

Taper
Manuel utilisateur

dans d''autres langues