LG WD-10276BD Le manuel du propriétaire

Marque: LG

Modèle: WD-10276BD

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Ce manuel convient également à

P / No.: MFL31245107

WM2477H*

WM2377C*

Designed specially to use only

HE (High Efficiency) detergent

PRODUCT FEATURES

CONTENTS

Direct Drive System

The advanced Brushless DC motor directly drives the drum without

belt and pulley.

Tilted Drum and Extra Large Door Opening

Tilted drum and extra large opening make it possible to load

and unload clothing more easily.

RollerJets

Washing ball enhances the wash performance and reduces damage

to the clothing. The jets spray and help tumble clothes to enhance

washing performance while maintaining fabric care.

Automatic Wash Load Detection

Automatically detects the load and optimizes the washing time.

Built-in Heater

(WM2477H*)

Internal heater helps to maintain water temperature at its optimum level for

selected cycles.

Child Lock

The Child lock prevents children from pressing any button to change the

settings during operation.

Important Safety Information ...........................................................................................................................................3

Specifications...................................................................................................................................................................4

Installation Instructions ....................................................................................................................................................5

Preparation Before Washing..........................................................................................................................................10

Using the Dispenser ......................................................................................................................................................11

Cycles ...........................................................................................................................................................................13

How to Use the Washer.................................................................................................................................................14

Maintenance ..................................................................................................................................................................17

Troubleshooting Guide ..................................................................................................................................................20

Warranty ........................................................................................................................................................................23

󲷸 󲷸

IMPORTANT SAFETY INFORMATION

ENGLISH

READ ALL INSTRUCTIONS BEFORE USE

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or

explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

IIMMPPOORRTTAANNTT SSAAFFEETTYY IINNSSTTRRUUCCTTIIOONNSS

• Read all instructions before using the washer.

• Do not wash articles that have been previously

cleaned in, washed in, soaked in, or spotted with

gasoline, dry cleaning solvents, or other

flammable or explosive substances, as they give

off vapors that could ignite or explode.

• Do not add gasoline, dry cleaning solvents, or

other flammable or explosive substances to the

wash water. These substances give off vapors that

could ignite or explode.

• Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been

used for such a period, before using the washing

machine, turn on all hot water faucets and let the

water flow from each for several minutes. This will

release any accumulated hydrogen gas. As the gas

is flammable, do not smoke or use an open flame

during this time.

• Do not allow children to play on or in the washer.

Close supervision of children is necessary when

the washer is used near children.

• Before the washer is removed from service or

discarded, remove the door to prevent children

from hiding inside.

• Do not install or store the washer where it will be

exposed to the weather.

• Do not tamper with controls.

• Do not repair or replace any part of the washer or

attempt any servicing unless specifically

recommended in the user-maintenance

instructions or published user-repair instructions

that you understand and have the skills to carry

out.

• See Installation Instructions for grounding

requirements.

• ALWAYS follow the fabric care instructions

supplied by the garment manufacturer.

• Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause

a load to catch fire.

• Do not use fabric softeners or products to

eliminate static unless recommended by the

manufacturer of the fabric softener or product.

WARNING

: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic

precautions, including the following:

SSAAVVEE TTHHEESSEE IINNSSTTRRUUCCTTIIOONNSS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk

of electric shock by providing a path of least resistance for electric current. This appliance is equipped with

a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an

appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

• Do not use an adapter or extension cord.

• Do not remove ground prong.

• If you don’t have the proper outlet, consult an electrician.

GROUNDING INSTRUCTIONS

WARNING

: Improper connection of the equipment-grounding conductor can result in risk of electric shock.

Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is

properly grounded. Do not modify the plug provided with the appliance - if it does not fit the outlet,

have a proper outlet installed by a qualified electrician.





SPECIFICATIONS

for removing shipping bolts

and leveling the washer

Accessories

Name: Front-loading Washing Machine

Power

supply: 120V~ 60Hz

Size: 68.6 cm (W) X 75.6 cm (D) X 98.3 cm (H), 129.1 cm (D, door open)

27”(W) X 29

”(D) X 38

”(H), 50

”(D, door open)

Weight: 190 lbs. (86 kg)

Wash capacity: 3.32 cu. ft. (IEC: 3.83 cu. ft.)

Spin speed: 1200 rpm max. (WM2477H*)

1000 rpm max. (WM2377C*)

Permissible water pressure: 4.5 ~ 145 PSI (30 ~ 1000 kPa)

󳀌

Specifications subject to change by manufacturer.

1) Per IEC 60456, washes the equivalent of a 3.83 cu. ft. agitator washer.

INSTALLATION INSTRUCTIONS

ENGLISH

1. To prevent internal damage during transport,

4 locking bolts are installed. Before operating

the washer, remove the bolts and braces.

• If they are not removed, it may cause severe

vibration, noise, and malfunction.

3. Take out the 4 bolts and braces by twisting

the braces slightly. Keep the 4 bolts, braces

and the wrench for future use.

• Whenever the appliance is transported, the

shipping bolts and braces must be reinstalled.

2. Unscrew the 4 bolts with the wrench supplied.

Do first lower side to remove easily. One of the

bolts retains the power cord of the washer to

prevent operating without removing bolts.

4. Close the holes with the caps supplied.

The appliance is fitted with shipping bolts to prevent

internal damage during transportation.

Packing and all shipping bolts must be removed

before using the washer.

󳀙 When unpacking the base, be sure to remove

the additional packing support in the middle of

the base packing.

: Two or more people may be need to install and move the appliance.

 Shipping bolts

Install or store unit where it will not be exposed to temperatures below freezing or

exposed to outside weather conditions.

Properly ground washer to conform with all governing codes and ordinances.

To reduce the risk of electric shock, do not install the washer in humid spaces.

The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay

particular attention to keeping the appliance and its surroundings in clean condition at all times.

Damage caused by cockroaches or other vermin will not be covered by the appliance warranty.

 Removing shipping bolts

cap

WARNING

INSTALLATION INSTRUCTIONS

 Installation clearances

The location must be large enough to fully open

the washer door.

 Washer dimensions

• Most installations require a minimum 4 in.

(10 cm) clearance behind the washer.

 Minimum installation spacing for

recessed area installation.

The following dimensions shown are for the minimum

spacing allowed.

Additional spacing should be considered for

installation and servicing.

• Additional clearances might be required for wall,

door and floor moldings.

• Additional spacing of 1 in. (2.5 cm) on all sides of

the washer is recommended to reduce noise

transfer.

Companion appliance spacing should also be

considered.

 Level floor

• Allowable slope under entire washer is 1°.

• To minimize noise and vibration, the washer

MUST be installed on a solidly constructed

floor.

• Carpeting and soft tile surfaces are not

recommended.

• Never install the washer on a platform or weakly

supported structure.

NOTE: A firm, solid floor is even more critical to a

front-loading washer than to a top-loader. If

your floor is wood and/or frame construction,

you may need to reinforce it. Front-loaders use

substantially faster spin speeds than top-

loaders, causing greater vibration. If the floor

is not solid, your washer will vibrate. You will

hear and feel the vibration throughout your

house.

 Power outlet

•

Must be within 60 in. (1.5 m) of either side of the

washer. Do not overload the outlet with more

than one appliance.

• Time-delay fuse or circuit breaker is

recommended.

NOTE: It is the personal responsibility and obligation

of the customer to have a proper outlet

installed by a qualified electrician.

[Front view]

[Side view]

INSTALLATION INSTRUCTIONS

ENGLISH

• Water supply pressure must be between

4.5 and 145 PSI (30~1000 kPa).

• Do not crossthread when connecting inlet hose to

the valve.

• If the water supply pressure is more than 145 PSI,

a pressure reducing device should be installed.

• Two Sealing washers are supplied with the water

inlet hoses to prevent water leaks.

• Check for leakage of washing machine connections

by turning the tap completely on.

• Periodically check the condition of the hose and

replace the hose if necessary.

• Make sure that there is no kink in the hose and that

it is not crushed.

• Be sure that the two water input ports are connected

to the correct water faucets. The connector for hot

water is colored red.

 Connecting water supply hose

NOTE: Washing Machine is to be connected to the water mains using new hoses.

Old hoses should not be used.

 Electrical connection

• Do not use an extension cord or double adapter.

• If the supply cord is damaged, it must be replaced by a qualified person in order to avoid a hazard.

• If the machine will not be used for an extended time, unplug it and shut off the water supply.

• Connect the machine to a grounded outlet in accordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accessible.

Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by

inexperienced persons may cause injury or serious malfunctioning. Contact your local service center.

Do not install your washing machine in a room where temperatures below freezing may occur.

Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired

at temperatures below the freezing point.

If the appliance is delivered in the winter months and temperatures are below freezing,

store the washing machine at room temperature for a few hours before putting it into operation.

CAUTION! Concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers

only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's

manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed

power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric

shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or

deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement

part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a

door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the

appliance.

INSTALLATION INSTRUCTIONS

 Installation of drain hose

• The drain hose should not be placed higher than

96 in. from the bottom of the washer.

• Properly securing the drain hose will protect the

floor from damage due to water leakage.

• Place the end of the drain hose in the hole of the

floor drain system.

• When installing the drain hose at a sink, secure it

so it cannot break away and cause flooding and

damage.

• Properly securing the drain hose will protect the

floor from damage due to water leakage.

This equipment is not designed for maritime use or for mobile installations such as in RV’s, aircraft, etc.

Turn off the faucet if the machine is to be left for an extended period of time (e.g. holiday).

When disposing of the appliance, cut off the power cable, and destroy the plug.

Disable the door lock to prevent young children being trapped inside.

Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation! Keep all

packaging from children.

INSTALLATION INSTRUCTIONS

ENGLISH

 Level adjustment

• Leveling the washing machine properly prevents

excessive noise and vibration.

Install the appliance on a solid and level floor surface,

preferably in a corner of the room.

• If the floor is uneven, adjust the adjustable feet as

required. (Do not insert pieces of wood, etc. under the

feet.)

NOTE: Extend the feet no more than necessary to level

the washer. The more the feet are extended, the

more the washer will vibrate.

• Make sure that all four feet are stable and resting on

the floor and then check that the appliance is perfectly

level (Use a level).

• After the washer is level, tighten the lock nuts up

against of the base of the washer. All lock nuts must

be tightened.

• It is critical to adjust the feet perfectly. This must be

done while the washer is spinning with a load. Use the

wrench (supplied) to adjust the feet until there is no

vibration. Then tighten the lock nuts to prevent further

adjustment.

NOTE: If there are vibration and noise during the spin

cycle, re-check the leveling of the washer, adjust

the feet as required, and tighten the lock nuts

securely to prevent changes in adjustment.

Run the washer with a test load to make certain

your washer is properly leveled. Put

approximately 6 pounds of laundry in the

machine. Then, press POWER, RINSE+SPIN, and

START/PAUSE, in that order. When the machine

spins at high speed, verify that it is stable. If not,

adjust the feet accordingly.

󳀌 Diagonal Check

When pushing down the edges of the washing machine

top plate diagonally, the machine should not move up

and down at all. (Please, check both directions.)

If the machine rocks when pushing the machine top plate

diagonally, adjust the feet again.

PREPARATION BEFORE WASHING

1. Fabric Care Labels

Look for a care label on your clothes. This will tell you about the fabric content of your garment and how it should

be washed.

2. Sorting

To get the best results, sort clothes into loads that can be washed with the same wash cycle.

Different fabrics need to be washed in different ways.

Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can occur causing

discoloration of white clothing. If possible, do not wash heavily soiled items with lightly soiled ones.

Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.

Color (White, Lights, Darks) Separate white fabrics from colored fabrics.

Lint (Lint Producers, Collectors) Wash lint producers and lint collectors separately.

3. Check before loading

Combine large and small items in a load. Load large items first.

Large items should not be more than half the total wash load.

Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.

• Check all the pockets to make sure that they are

empty. Things such as clip, matches, pens,

coins, and keys can damage both your washer

and your clothes.

• Close zippers, hooks, and strings to make sure

that these items do not snag on other clothes.

• Pretreat dirt and stains by brushing a little

detergent dissolved in water onto stains like

collars and cuffs to help lift dirt.

WARNING

To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY

INSTRUCTIONS before operating this appliance.

NOTE: Do not wash or spin water-proof clothes.

USING THE DISPENSER

ENGLISH

The automatic dispenser consists of four compartments which hold 1) liquid chlorine bleach, 2) liquid fabric

softener, 3) liquid or powdered detergent for prewash and 4) liquid or powdered detergent

and color safe bleach for main wash.

All laundry products can be added at once in their respective dispenser compartments.

They will be dispensed at the appropriate time for most effective cleaning. After loading the laundry

additives into the dispenser, close the dispenser drawer.

Add detergent, bleach and fabric softener to the automatic dispenser following these steps:

1. Open the dispenser drawer.

2. Load the laundry products into the appropriate compartments.

3. Close the dispenser drawer.

 About detergent

Your LG TROMM washer is designed to use only High Efficiency (HE) detergents.

HE detergents are formulated specifically for front load washers and contain suds reducing components.

HE detergents make less suds, improve washing and rinsing performance, and help to keep the interior

of your LG TROMM washer clean.Use the manufacture’s recommend amount.

If a regular detergent is used, it may cause oversudsing and unsatisfactory performance.

For the best washing and rinsing performance, low-sudsing HE detergents are strongly recommended.

• Add detergent to this compartment when using

the Prewash option. Liquid or powdered

detergent may be used in this compartment. The

detergent will automatically be dispensed during

Prewash if the Prewash option is selected.

• Add 1/2 the recommended amount of detergent

to the Prewash compartment and the

recommended amount of detergent to the main

wash compartment.

NOTE : Liquid detergent will drain into the washer

drum as it is added.

1. Prewash Detergent Compartment

Liquid Chlorine

Bleach

Compartment

Liquid Fabric

Softener

Compartment

Prewash

Compartment

Main Wash

Compartment

Designed specially to use only

HE(High Efficiency) detergent

USING THE DISPENSER

• Add measured detergent to this compartment for

Main wash. Detergent is flushed from the

dispenser at the beginning of the cycle. Either

powdered or liquid detergent can be used.

• Liquid or powdered color-safe bleach may be

added to the main wash compartment along with

the same type of liquid or powdered detergent.

• When using liquid detergent, make sure the liquid

detergent box and insert are in place. Do not

exceed the maximum fill line.

• For powered detergent, remove both the liquid

detergent box and insert.

• Powdered detergent will not dispense with the

liquid detergent box and insert in place.

2. Main Wash Detergent Compartment

• Add measured liquid chlorine bleach to this

compartment. The bleach will be automatically

dispensed at the proper time during the wash

cycle.

• Do not exceed the maximum fill line. Overfilling can

cause early dispensing of the bleach which could

result in damaged clothes.

• Do not pour undiluted liquid chlorine bleach directly

onto the load or into the drum. Fabric damage can

occur.

• Do not use powdered bleach in this compartment.

3. Liquid Bleach Compartment

• Add recommended amount of fabric softener to

this compartment.

• Dilute concentrated softeners with warm water to

the fill line.

• Do not exceed the maximum fill line. Overfilling can

cause early dispensing of the fabric softener which

could result in stained clothes.

• Do not pour fabric softener directly on the wash

load.

• The fabric softener will be automatically dispensed

during the last rinse cycle.

NOTE: Do not place, store, or spill laundry products

(soap, detergent, bleach, softener, etc.) on the

top of your washer or dryer. These products

can damage the finish or controls if left there

too long.

4. Fabric Softener Compartment

Liquid Detergent

Box

Insert

Designed specially to use only

HE(High Efficiency) detergent

Warm/Cold

Extra high

Normal

Cold/Cold

No spin Heavy

Cotton/

Cotton, linen,

Tap Cold/Cold

Low Light

OOOOO

Towels

towels, shirts,

sheets

Hot/Cold

Medium

Warm/Warm

High

Warm/Cold

High

Normal

Mixed loads,

Cold/Cold

Heavy

Normal

work clothes,

Tap Cold/Cold

No spin Light

OOOOO

jeans, shirts

Hot/Cold

Low

Warm/Warm

Medium

Dress shirts/ Warm/Cold Medium

Medium

Normal

Perm

pants, wrinkle free

Cold/Cold

Heavy

Press

clothing, poly/

Tap Cold/Cold

No spin

Light

OOOOO

cotton blend

Hot/Cold

clothing, table cloths

Warm/Warm

Low

Dress shirts/ Cold/Cold Normal

Delicates

blouses, nylons,

Tap Cold/Cold

Heavy

OO OO

sheer or Warm/Warm

No spin

Light

lacy garment

Warm/Cold

Woolens, silk Cold/Cold Normal

Wool/ identified as

Tap Cold/Cold

Low

Light

OOO

Silk machine Warm/Warm

Medium

washable

Warm/Cold

No spin

Cold/Cold Normal

Hand Items labeled

Tap Cold/Cold

Low

Light

Wash “hand washable” Warm/Warm

Medium

Warm/Cold

No spin

Hot/Cold Extra high Light

Warm/Warm

No spin Normal

Speed Lightly soiled

Warm/Cold

Heavy

Wash clothing

Cold/Cold

Low

Tap Cold/Cold

Medium

High

Cycle Fabric type

Wash/Rinse

Water

Plus

Water

Plus

Spin speed

Soil Pre-

Temp. Level Wash

WM2477H* WM2377C*

CYCLES

ENGLISH

 Select cycles designed for different types of fabric and soil levels.

HOW TO USE THE WASHER

SPINSENSE

WATER

PLUS

SPINSENSE

WATER

PLUS

SPINSENSE

WATER

PLUS

SPINSENSE

WATER

PLUS

• Rotate the Cycle selector knob to select cycle

designed for different types of fabric and soil

levels.

• Each cycle has a preset Water Temperature, Spin

Speed, Soil Level, and Option (See page 13).

• The preset settings can be changed anytime

before Start.

NOTE: This front load washer requires longer cycle time

and gets clothes much cleaner, yet is more gentle

on the fabrics, than top load washers. Washing

time can be reduced significantly for small loads

or lightly soiled loads by selecting Speed Wash

cycle and setting the Soil Level button at Light.

2. Cycles

• Use this button to turn the Power On/Off.

1. Power

• Use this button to start/stop the washer.

3. Start/Pause

• Allows the start of any cycle to be delayed for

1~12 (9) hours.

• Choose the wash cycle for your load, and then

press the Delay Wash button once for one hour or

press the button again to increase the delay wash

time up to 12 (9) hours in one hour increments.

4. Delay Wash

■ WM2477H*

■ WM2377C*

HOW TO USE THE WASHER

ENGLISH

• Custom Program allows you to store a customized

wash cycle for future use.

• To make a Custom Program:

1. Select a cycle.

2. Select Wash/Rinse Temperature, Spin Speed,

and Soil Level.

3. Select other desired Options.

4. Press and hold Custom Program button 3

seconds (2 beep sounds).

The Custom program is now stored for future

use. To reuse the program, select Custom

Program and press Start/Pause .

5. Custom Program

• Press repeatedly to adjust the volume of the

Beeper.

9. Beeper

• Select a water temperature based on the type of

load you are washing.

• Follow the fabric care label and chart below for

best results.

• Warm rinses leave the loads dryer than cold

rinses. Warm rinses increase wrinkling.

• In cold climates, a warm rinse makes the load

more comfortable to handle.

• Cold rinses save energy.

• The Cold rinse temperatures depend on the cold

water at your faucet.

• Warm rinses are regulated at approximately

86°F (30°C).

• For the Tap Cold/Cold setting, both wash and rinse

temperatures depend on the cold water at your

faucet.

6. Wash/Rinse Temperature

• To change the spin speed, press the Spin Speed

button repeatedly to cycle through available

options.

• To start Drain/Spin cycle:

1. Press Power button to turn on.

2. Press Spin Speed button only.

3. Press Start/Pause button.

7. Spin speed

• To change the soil level, press the Soil Level

button repeatedly until the desired setting is on.

8. Soil Level

Suggested Wash Temp.

Garment

Extra Hot Kitchen towels, sheets,

167°F (75°C) and baby garments

Hot Whites and Heavy

122°F (50°C) soiled color-fast items

Warm

Most loads

104°F (40°C)

Cold Brightly colored items,

77°F (25°C) washable woolens

HOW TO USE THE WASHER

OPTION

CHILD LOCK

DOOR LOCKED

• Use this option for loads that need pretreatment.

Adds 16 minutes prewash and drain.

1. Prewash

• Lights whenever the door of the washer is locked.

• The door can be unlocked by pressing the

Start/Pause button to stop the washer.

NOTE: If the water temperature or the level is too

high, the door cannot be unlocked.

Do not try to force the door open when

DOOR LOCKED lights on.

STATUS INDICATOR

• These lights show which portion of the cycle the

washer is operating.

EST. TIME REMAINING

• This display shows:

a) the estimated time remaining in the cycle when

operating,

b) the error code when an error has been

detected.

• Use this option to prevent unwanted use of the

washer. Press and hold PRE WASH button for 3

seconds to lock/unlock control.

• When Child lock is set, CHILD LOCK lights and all

buttons are disabled except the Power button.

You can lock the washer while it is operating.

• Adds time to the wash and rinse for better stain

removal.

• Automatically provides a rinse.

4. Stain cycle

• This option provides an additional rinse.

• Use this option to ensure the removal of detergent

or bleach residue from garments.

3. Extra Rinse

• Use this option to rinse and then spin.

2. Rinse+Spin

• Adds extra water to the wash and rinse cycles for

superior results.

5. Water Plus

• SPINSENSE

can be used when there is a vibration

problem, especially on wood floor installations.

• To operate SPINSENSE

press and hold the Stain

Cycle button for 3 seconds when the washing machine

is running on any cycle.

• When SPINSENSE

has been selected, the Spin

Speed button light will blink on and off continually to

indicate that the SPINSENSE

function has been

selected.

• Push and hold the Stain Cycle button again for 3

seconds to cancel SPINSENSE

• Once SPINSENSE

has been selected, if will continue

to function even if interrupted by a power failure.

6. SPINSENSE

ENGLISH

MAINTENANCE

 The water inlet filter

• " " error message will blink on the control panel when water does not enter the dispenser.

• If your water is very hard or contains traces of lime deposit, the water inlet filter may become clogged.

We recommend cleaning it every few months.

Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock hazards.

When disposing of the appliance, cut off the power cable, destroy the plug, and disable the door lock to prevent

young children from being trapped inside.

1. Turn off the

water tap.

2. Unscrew

the water

inlet hose.

3. Clean the

filter using

a hard

bristle

brush.

4. Tighten

the inlet

hose.

1. Open the lower cover cap (󲾩).

Turn the drain plug (󲾪) to pull

out the hose.

2. Unplug the drain plug 󲾪,

allowing the water to flow out.

At this time use a vessel to

prevent water from flowing

onto the floor. When water does

not flow any more, turn the

pump filter 󲾫 open to the left.

3. Remove any foreign objects from

the pump filter 󲾫. After cleaning,

turn the pump filter 󲾫 clockwise

and insert the drain plug 󲾪 to the

original place. Close the lower

cover cap󲾩.

 The drain pump filter

•

The drain filter collects threads and small objects left in the laundry.

Check regularly that the filter is clean to ensure smooth running of your machine.

• Allow the water to cool down before cleaning the drain pump filter.

CAUTION

Drain, using the drain hose, before opening the pump filter to remove objects.

Be careful when draining if the water is hot.

MAINTENANCE

 Cleaning the Dispenser

•

The dispenser may need to be cleaned periodically due to laundry additive build-up.

• Run warm water and use a soft brush or cloth on the drawer, liquid detergent box and inserts to remove any excess

laundry additives.

• Clean the drawer opening using water and a small brush.

• Follow the illustrations in reverse order to replace the parts to their proper location.

NOTE: Do not use any cleaning substance on the drawer opening other than water because it will drain into the tub.

If this should happen, set the washer for a rinse and spin cycle to remove any cleaning substance from the

washer before doing a load of laundry.

 The washing drum

• If you live in a hard water area, lime scale can continuously build up in places where it cannot be seen

and it is not easily removed from the drum.

Over time the build-up of scale clogs appliances, and if it is not kept in check, these will eventually

have to be replaced.

• Although the washing drum is made of Stainless steel, specks of rust can be caused by small metal articles

(paper clips, safety pins, etc.) which have been left in the drum.

• The washing drum should be cleaned from time to time.

• If you use descaling agents, dyes, or bleaches, make sure they are suitable for washing machine use.

• Descaler could contain components that can damage part of your washing machine.

• Remove the spots with a stainless steel cleaning agent.

• Never use steel wool.





Pull the dispenser

drawer out until it stops.

Press down the lock tab

on the bleach insert.

Remove the drawer.

Remove the liquid detergent

box, softener and bleach

inserts from their

compartments.





ENGLISH

MAINTENANCE

 Cleaning your washer

1. Exterior

Proper care of your washer can extend its life.

The outside of the machine can be cleaned with warm water and a neutral, non-abrasive

household detergent.

Immediately wipe off any spills. Wipe with a damp cloth.

Try not to damage the surface with sharp objects.

󳀌 IMPORTANT: Do not use methylated spirit, solvents or similar products.

2. Interior

Dry around the washer door opening, flexible gasket and door glass. These areas should always be clean to

ensure a water-tight seal.

Run washer through a complete cycle using hot water.

Repeat process if necessary.

• To start the TUB CLEAN cycle:

1. Remove any clothing or items from the washer and close the door.

2. Open the dispenser drawer and add liquid chlorine bleach to the bleach compartment.

NOTE: Do not add any detergent to the detergent compartments. Excessive suds may be produced and leak

from the washer.

3. Close the dispenser drawer slowly.

4. Power On and then press the Extra Rinse button for 3 seconds. (Prewash option will be selected.)

5. Press the Start/Pause button to start.

6. After the cycle is complete, leave the door open to dry around the washer door opening, door seal and

door glass.

CAUTION: If there are small children in the house, care must be taken so that they can not climb into or

play inside the washer while it is open for drying.

NOTE: Remove hard water deposits using only cleaners labeled as safe for washing machines.

 Winterizing instructions

If the washer is stored in an area where freezing can occur or moved in freezing temperatures, follow these

winterizing instructions to prevent damage to the washer:

1. Turn off water supply tap.

2. Disconnect hoses from water supply and drain water from hoses.

3. Plug electrical cord into a properly grounded electrical outlet.

4. Add 1 gallon (3.8 ) nontoxic recreational vehicle (RV) antifreeze to empty wash drum. Close door.

5. Set spin cycle and let washer spin for 1 minute to drain out all the water.

Not all of the RV antifreeze will be expelled.

6. Unplug electrical power cord, dry drum interior, and close door.

7. Remove the two-compartment container from the Dispenser. Drain any water in compartments and dry the

compartments.

8. Store washer in an upright position.

9. To remove antifreeze from washer after storage, run empty washer through a complete cycle using detergent.

Do not add laundry.

La page charge ...

LG WD-10276BD Le manuel du propriétaire

Marque: LG

Modèle: WD-10276BD

Catégorie: Machines à laver

Taper: Le manuel du propriétaire

Ce manuel convient également à

Télécharger le PDF

rapport

dans d''autres langues

English: LG WD-10276BD Owner's manual

LG WD-10276BD Le manuel du propriétaire

Ce manuel convient également à

LG WD-10276BD Le manuel du propriétaire

dans d''autres langues

Documents connexes