LG 55NANO85APA Le manuel du propriétaire

Marque: LG

Modèle: 55NANO85APA

Catégorie: Téléviseurs LCD

Taper: Le manuel du propriétaire

Ce manuel convient également à

ENGLISH_index

43NANO75UPA

50NANO75UPA

50NANO77ZPA

50NANO80UPA

50NANO85APA

55NANO75UPA

55NANO77ZPA

55NANO80UPA

55NANO85APA

55NANO90UPA

65NANO75UPA

65NANO77ZPA

65NANO80UPA

65NANO85APA

65NANO90UPA

75NANO75UPA

75NANO80UPA

75NANO85APA

75NANO90UPA

86NANO75UPA

86NANO85APA

86NANO90UPA

www.lg.com

Printed in Korea

LED TV*

Safety and Reference

OWNER’S MANUAL

Please read this manual carefully before operating your set and

retain it for future reference.

* LG LED TV applies LCD screen with LED backlights.

*MFL71753533*

(2103-REV01)

Important Safety Instruction

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the

apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,

does not operate normally, or has been dropped.

By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited

to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement

(including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/arbitration

(Canada).

Title

Before reading this manual

• Read this manual thoroughly before operating your TV, and keep it for future reference.

• On the website you can download the manual including installation, using, troubleshooting, specifications, license etc and view its

contents on your PC or mobile device.

User Guide For more information about this TV, read the USER GUIDE embedded in the product. (Depending upon model)

• To open the USER GUIDE → → [Support] → [User Guide]

Optional Extras

• Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these

items. These devices work only with certain models.

• The model name or design may be changed due to the manufacturer’s circumstances or policies.

• A cable to connect antennas and external devices must be purchased separately.

Note

• Product specifications or contents of this manual may be changed without prior notice due to upgrade of

product functions.

• The items supplied with your product may vary depending upon the model.

• Image shown may differ from your TV.

󰟟 Warning! Safety instructions

󰟠 Preparing

- Lifting and moving the TV

- Mounting on the Table

- Mounting to the Wall

- Antenna/Cable

󰟡 Starting TV

- Turning on the TV

- Registering Magic Remote Control

󰠿 Using Remote Control

- Using Magic Remote Control

󰟣 Connections

󰟤 Troubleshooting

󰟥 Specifications

- Open Source Software Notice Information

- Licenses

󰟦 Regulatory

󰟟 Warning! Safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED

SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature

accompanying the device.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER

ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT

ALL TIMES.

• Do not place the TV and/or remote control in the

following environments:

- Keep the product away from direct sunlight.

- An area with high humidity such as a bathroom.

- Near any heat source such as stoves and other devices that

produce heat.

- Near kitchen counters or humidifiers where they can easily

be exposed to steam or oil.

- An area exposed to rain or wind.

- Do not expose to dripping or splashing and do not place

objects filled with liquids, such as vases, cups, etc. on or

over the apparatus (e.g., on shelves above the unit).

- Near flammable objects such as gasoline or candles, or

expose the TV to direct air conditioning.

- Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/

explosion, malfunction or product deformation.

• Ventilation

- Install your TV where there is proper ventilation. Do not

install in a confined space such as a bookcase.

- Do not install the product on a carpet or cushion.

- Do not block or cover the product with cloth or other

materials while unit is plugged in.

• Take care not to touch the ventilation openings. When

watching the TV for a long period, the ventilation openings

may become hot.

• Protect the power cord from physical or mechanical abuse,

such as being twisted, kinked, pinched, closed in a door, or

walked upon. Pay particular attention to plugs, wall outlets,

and the point where the cord exits the device.

• Do not move the TV whilst the Power cord is plugged in.

• Do not use a damaged or loosely fitting power cord.

• Be sure to grasp the plug when unplugging the power cord.

Do not pull on the power cord to unplug the TV.

• Do not connect too many devices to the same AC power

outlet as this could result in fire or electric shock.

• Disconnecting the Device from the Main Power

- The power plug is the disconnecting device. In case of an

emergency, the power plug must remain readily accessible.

• Do not let your children climb or cling onto the TV. Otherwise,

the TV may fall over, which may cause serious injury.

• Outdoor Antenna Grounding (Can differ by country):

- If an outdoor antenna is installed, follow the precautions

below.

An outdoor antenna system should not be located in the

vicinity of overhead power lines or other electric light or

power circuits, or where it can come in contact with such

power lines or circuits as death or serious injury can occur.

Be sure the antenna system is grounded to provide some

protection against voltage surges and built-up static

charges.

Section 810 of the National Electrical Code (NEC) in

the U.S.A. provides information with respect to proper

grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge unit,

connection to grounding electrodes and requirements for

the grounding electrode.

Antenna grounding according to the National Electrical

Code, ANSI/NFPA 70

• Grounding (Except for devices which are not grounded.)

- TV with a three-prong grounded AC plug must be

connected to a three-prong grounded AC outlet. Ensure

that you connect the earth ground wire to prevent possible

electric shock.

• Never touch this apparatus or antenna during a lightning

storm. You may be electrocuted.

• Make sure the power cord is connected securely to the TV and

wall socket if not secured damage to the Plug and socket may

occur and in extreme cases a fire may break out.

• Do not insert metallic or inflammable objects into the

product. If a foreign object is dropped into the product,

unplug the power cord and contact the customer service.

• Do not touch the end of the power cord while it is plugged in.

You may be electrocuted.

• If any of the following occur, unplug the product

immediately and contact your local customer service.

- The product has been damaged.

- If water or another substance enters the product (like an AC

adapter, power cord, or TV).

- If you smell smoke or other odors coming from the TV

- When lightning storms or when unused for long periods

of time.

Even the TV is turned off by remote control or button, AC

power source is connected to the unit if not unplugged in.

• Do not use high voltage electrical equipment near the TV

(e.g., a bug zapper). This may result in product malfunction.

• Do not attempt to modify this product in any way without

written authorization from LG Electronics. Accidental fire or

electric shock can occur. Contact your local customer service

for service or repair. Unauthorized modification could void the

user’s authority to operate this product.

• Use only an authorized attachments / accessories approved

by LG Electronics. Otherwise, this may result in fire, electric

shock, malfunction, or product damage.

• Never disassemble the AC adapter or power cord. This may

result in fire or electric shock.

• Handle the adapter carefully to avoid dropping or striking it.

An impact could damage the adapter.

• To reduce the risk of fire or electrical shock, do not touch

the TV with wet hands. If the power cord prongs are wet or

covered with dust, dry the power plug completely or wipe

dust off.

• Batteries

- Store the accessories (battery, etc.) in a safe location out of

the reach of children.

- Do not short circuit, disassemble, or allow the batteries

to overheat. Do not dispose of batteries in a fire. Batteries

should not be exposed to excessive heat.

- Caution: Risk of fire or explosion if the battery is replaced

by an incorrect type.

• Moving

- When moving, make sure the product is turned off,

unplugged, and all cables have been removed. It may take

2 or more people to carry larger TVs. Do not press or put

stress on the front panel of the TV. Otherwise, this may

result in product damage, fire hazard or injury.

• Keep the packing anti-moisture material or vinyl packing out

of the reach of children.

• Do not allow an impact shock, any objects to fall into the

product, and do not drop anything onto the screen.

• Do not press strongly upon the panel with a hand or a sharp

object such as a nail, pencil, or pen, or make a scratch on it. It

may causedamage to screen.

• Cleaning

- When cleaning, unplug the power cord and wipe gently

with a soft/dry cloth. Do not spray water or other liquids

directly on the TV. Do not clean your TV with chemicals

including glass cleaner, any type of air freshener,

insecticide, lubricants, wax (car, industrial), abrasive,

thinner, benzene, alcohol etc., which can damage the

product and/or its panel. Otherwise, this may result in

electric shock or product damage.

󰟠 Preparing

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its

type and size.

• It is recommended to move the TV in the box or packing material that the TV originally came in.

• Before moving or lifting the TV, disconnect the power cord and all cables.

• When holding the TV, the screen should face away from you to avoid damage.

• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part,

speaker, or speaker grille area.

• Use at least two people to move a large TV.

• When transporting the TV by hand, hold the TV as shown in the following illustration.

• When transporting the TV, do not expose the TV to jolts or excessive vibration.

• When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

• When handling the TV, be careful not to damage the protruding buttons.

• Avoid touching the screen at all times, as this may result in damage to the screen.

• Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the

screen.

• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from

scratches.

Mounting on the Table

1 Lift and tilt the TV into its upright position on a table.

• Leave a minimum of 10 cm (4 inches) space from the wall for proper

ventilation.

2 Connect the power cord to a wall outlet.

10cm

(4inches)

(Depending upon model)

• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the

product.)

• If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall

over, which may cause injury.

• Do not use any unapproved items to ensure the safety and lifespan of the product.

• Any damages or injuries by using unapproved items are not covered by the warranty.

• Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being

installed.)

• Do not fasten the screws with excessive force otherwise they may strip and become loose.

Securing TV to the Wall

1 Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV.

• If there are bolts inserted at the eye-bolts position, remove the bolts first.

2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

3 Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep

the rope parallel to the flat surface.

• Use a platform or cabinet that is strong and large enough to support the TV securely.

• Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local

dealer.

(Depending upon model)

Mounting to the Wall

An optional wall mount can be used with your LG Television. Consult with

your local dealer for a wall mount that supports the VESA standard used

by your TV model. Carefully attach the wall mount bracket at the rear of

the TV. Install the wall mount bracket on a solid wall perpendicular to the

floor. If you are attaching the TV to other building materials, please contact

qualified personnel to install the wall mount. Detailed instructions will be

included with the wall mount. We recommend that you use an LG brand

wall mount. The LG wall mount is easy to adjust or to connect the cables.

When you do not use LG’s wall mount bracket, use a wall mount bracket

where the device is adequately secured to the wall with enough space to

allow connectivity to external devices. If you are using a non-adjustable

mount, attach the mount to the wall. Attach the cables to the TV first, then

attach the TV to the mount.

10cm

(4inches)

(Depending upon model)

• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

• For more information of screws and wall mount bracket, refer to the Separate Purchase.

• If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product.

When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and

insects, (Depending upon model).

Stand hole

(Depending upon model)

Wall Mounting Bracket

(Depending upon model)

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the

following table.

Model

43/50NANO75*

50NANO77*

50NANO80*

50NANO85*

55/65NANO75*

55/65NANO77*

55/65NANO80*

55/65NANO85*

55NANO90*

65NANO90*

Model

75NANO80*

75NANO85*

75NANO90*

86NANO85*

86NANO90*

Screws distance

(A) (mm)

200 300 400

Screws

distance (A x B)

(mm)

1,281x125 1,586x125

Standard screw M6 M6 M6

Standard screw M8 M8

Number of

screws

2 2 2

Number of

screws

4 4

Wall mount

bracket

WB21LMB WB21LMB WB21LMC

Wall mount

bracket

WB21LGB WB21LGB

Model

43/50NANO75*

50NANO77*

50NANO80*

50NANO85*

55NANO75*

55NANO77*

55NANO80*

55NANO85*

55NANO90*

65NANO75*

65NANO77*

65NANO80*

65NANO85*

75NANO75*

75NANO80*

75NANO85*

65/75NANO90*

86NANO75*

86NANO85*

86NANO90*

VESA (A x B)

(mm)

200x200 300x300 300x300 400x400 600x400

Standard screw M6 M6 M6 M6 M8

Number of

screws

4 4 4 4 4

Wall mount

bracket

LSW240B

MSW240

OLW480B

MSW240

OLW480B LSW440B LSW640B

Antenna/Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF

cable is optional.

• Make sure not to bend the copper wire of the RF cable.

Copper wire

• Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

• Use a signal splitter to use 2 TVs or more.

• DTV Audio Supported Codec: MPEG, Dolby Digital

• This TV cannot receive Ultra HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed.

󰟡 Starting TV

Turning on the TV

You can simply operate the TV functions, using the button.

Using button

Power On (Press)

Power Off

(Press and Hold)

Menu Control (Press

)

Menu Selection (Press and Hold

)

1) All running apps will close.

2) You can access and adjust the menu by pressing the button when TV is on.

3) You can use the function when you access menu control.

Note

• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take

approximately one minute.

Adjusting the menu

When the TV is turned on, press the button one time. You can adjust the Menu items using the button.

Turns the power off. Changes the input source.

Adjusts the volume level. Scrolls through the saved channels.

Note

• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

• The available menus and options may differ from the input source or product model that you are using.

• New features may be added to this TV in the future.

• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off

button, turning off the device and unplugging the power cord.

Inserting the battery

When the message [Magic Remote battery is low. Please change the battery.] is displayed, replace

the batteries.

To install batteries, open the battery cover, replace batteries (1.5VAA) matching the and

ends to the label inside the compartment, and close the battery cover.

To remove the batteries, perform the installation actions in reverse.

• Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.

• Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or

ambient pollution.

• This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly

due to environmental considerations. Please contact your local authorities for disposal or recycling information.

• Batteries inside or inside the product shall not be exposed to excessive heat such as sunshine, fire or the like.

Registering Magic Remote Control

How to register the Magic Remote Control

To use the Magic Remote, first pair it with your TV.

1 Put batteries into the Magic Remote and turn the TV on.

2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

* If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control

Press the (Back) and (Home) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

* Press and hold the (Home) and (Q. Settings) buttons for more than 5 seconds to disconnect and re-register the Magic Remote at the

same time.

• It is recommended that an Access Point (AP) be located more than 0.2m (0.65ft) away from the TV. If the AP is installed closer than

0.2m (0.65ft), the Magic remote control may not perform as expected due to frequency interference.

󰠿 Using Remote Control

Using Magic Remote Control

(Depending upon model)

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

Power Turns the TV on or off.

(Dash) Inserts a between numbers

such as 2-1 and 2-2.

Accesses the saved channel list.

Accesses the [Guide].

Accesses the [Edit Quick Access].

- [Edit Quick Access] is a feature that

allows you to enter a specified app or

Live TV directly by pressing and holding

the number buttons.

Volume buttons Adjusts the volume

level.

Channel buttons Scrolls through the

saved channels.

Home Accesses the Home menu.

Home Launches the last used apps.

Input Changes the input source.

Input Accesses the [Home Dashboard].

Wheel (OK) Press the center of

button to select a menu. You can change

channels by using button.

Wheel (OK) Accesses the [Magic

Explorer]. You can run the [Magic Explorer]

feature when the pointer color is changed

to purple. If watching a channel, press

and hold down the pointer onto the video.

When using [TV Guide], [Settings], [Sports

Alert], or [Art Gallery], press and hold

down on the text.

Back Returns to the previous level.

Back Clears on-screen displays and

returns to last input viewing.

1 1

Microphone

Number buttons Enters numbers.

Accesses the [Quick Help].

More actions Displays more remote

control functions.

SAP (Secondary Audio Program) feature

can also be enabled by pressing the

button.

Mute Mutes all sounds.

Mute Accesses the [Accessibility] menu.

Voice recognition Network connection

is required to use the voice recognition

function.

Check for recommended content. (Some

recommended services may not be

available in some countries.)

Voice recognition Speak while pressing

and holding the button to use the voice

recognition feature.

Up/Down/Left/Right Press the up,

down, left or right button to scroll the

menu. If you press buttons while the

pointer is in use, the pointer will disappear

from the screen and Magic Remote will

operate like a general remote control. To

display the pointer on the screen again,

shake Magic Remote to the left and right.

Q. Settings Accesses the Quick Settings.

Q. Settings Displays the [All Settings]

menu.

These access special functions in some

menus.

Streaming Service buttons Connects to

the Video Streaming Service.

(Some buttons and services may not be provided depending upon models or regions.)

Note

To use the button, press and hold for more than 1 second.

󰟣 Connections

You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each

device.

HDMI

• When connecting the HDMI cable, the product and external devices should be turned off and unplugged.

• Supported HDMI Audio format (Depending upon model):

True HD (48kHz),

Dolby Digital / Dolby Digital Plus (32kHz / 44.1kHz / 48kHz),

PCM (32kHz / 44.1kHz / 48kHz / 96kHz / 192kHz)

Note

• If the device connected to Input Port also supports HDMI Deep Color, your picture may be clearer. However,

if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Deep Color]

setting to off.

- This feature is available only on certain models which support HDMI Deep Color.

• → → [General] → [Devices] → [HDMI Settings] → [HDMI Deep Color]

(Except for 86NANO75*, NANO85*, NANO90*)

- On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)

- Off: Support 4K @ 50/60 Hz (4:2:0)

(Only 86NANO75*, NANO85*, NANO90*)

- On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0),

<3, 4 port Only> 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0)

- Off: Support 4K @ 50/60 Hz (4:2:0)

• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may

not display or a connection error may occur.

• Recommended HDMI cable types (3m (9.84feet) or less)

- Ultra High Speed HDMI

/™ cable

Note

• For an optimal connection, HDMI cables and USB devices should have bezels less than 10mm (0.39inches)

thick, 18mm (0.7inches) width and 8mm (0.31inches) a wire diameter. (Depending upon model)

• Use an extension cable that supports if the USB cable or USB flash drive does not fit into your TV’s USB

port.

* A ≦ 10mm (0.39inches)

* B ≦ 18mm (0.7inches)

* C ≦ 8mm (0.31inches)

External

Devices

Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage

devices, PC, gaming devices, and other external devices. For more information on external device’s connection,

refer to the manual provided with each device.

Note

• If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input

cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual

provided with the connected device.

• The external device connections shown may differ slightly from illustrations in a manual.

• Connect external devices to the TV regardless about the order of the TV port.

• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

• Refer to the external equipment’s manual for operating instructions.

• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If

noise is present, change the PC output to another resolution, change the refresh rate to another rate or

adjust the brightness and contrast on the [Picture] menu until the picture is clear. Depending upon the

graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

• Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it

directly to the USB port on the TV.

• When connecting via a wired LAN, it is recommended to use a CAT 7 cable.

• The TV may be capable of operating without a set-top-box from a multichannel video programming

distributor (MVPD).

Remote

RS-232C

setup

To obtain the RS-232C external control setup information, please visit www.lg.com. Download and read the

manual, (Depending upon model).

• Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in

injury or damage to the product.

• When connecting external devices such as video game consoles, make sure the connecting cables are long

enough. Otherwise, the product may fall over, which may cause injury or damage the product.

󰟤 Troubleshooting

Cannot control the

TV with the remote

control.

• Check if anything such as tape has been placed over the receiver.

• Check if there is any obstacle between the product and the remote control.

• Replace the batteries with new fresh ones.

No image display and

no sound is produced.

• Check if the product is turned on.

• Check if the power cord is connected to a wall outlet.

• Check if there is a problem in the wall outlet by connecting other products.

The TV turns off

suddenly.

• Check the power control settings. The power supply may be interrupted.

• Check if the auto-off function is activated in the settings menu.

• If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

Abnormal Display • If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there

is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red,

green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD

screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary

distortion effects on the screen.

• This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine

dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the

performance and reliability of the TV.

• Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed

image on the TV screen for a extended length of time.

Generated Sound • Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic

thermal contraction due to temperature and humidity. This noise is common for products where thermal

deformation is required.

• Electrical circuit humming/panel buzzing A low level noise is generated from a high-speed switching

circuit, which supplies a large amount of current to operate a product. It varies depending upon the product.

This generated sound does not affect the performance and reliability of the product.

• When cleaning the product, be careful not to allow any liquid or foreign objects to

enter the gap between the upper, left or right side of the panel and the guide panel,

(Depending upon model).

• Make sure to wring any excess water or cleaner from the cloth.

• Do not spray water or cleaner directly onto the TV screen.

• Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

󰟥 Specifications

Product specifications may be changed without prior notice due to upgrade of product functions.

Estimated yearly energy consumption indicated on the FTC label is measured in accordance with the Test Procedures for Television Sets (USA only).

The actual energy consumption depends on the usage environment (The content watched, TV settings, etc.).

• For information of the power supply and power consumption, refer to the label attached to the product.

- The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.

* On some models, the label is inside the external device connection terminal cover.

* Depending upon the model or country, the typical power consumption may not be on label.

(Depending upon country)

Broadcasting Specifications

Television system ATSC, NTSC-M, 64 & 256 QAM

Channel coverage

(Band)

VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135

External antenna impedance 75Ω

(Only 86NANO75*, NANO85*, NANO90*)

Wireless module(LGSBWAC95)Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency range Output Power (Max.)

2,400 to 2,483.5MHz 18.5dBm

5,150 to 5,725MHz 18dBm

5,725 to 5,850MHz 18dBm

Bluetooth

Frequency range Output Power (Max.)

2,400 to 2,483.5MHz 9dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional

frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20cm (7.8inches) between the device and

the body.

FCC ID: BEJLGSBWAC95 / IC: 2703H-LGSBWAC95

(Except for 86NANO75*, NANO85*, NANO90*)

Wireless module(LGSBWAC03)Specifications

Wireless LAN (IEEE 802.11a/b/g/n/ac)

Frequency range Output Power (Max.)

2,400 to 2,483.5MHz 20dBm

5,150 to 5,725MHz 18.5dBm

5,725 to 5,850MHz 18dBm

Bluetooth

Frequency range Output Power (Max.)

2,400 to 2,483.5MHz 9dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional

frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20cm (7.8inches) between the device and

the body.

FCC ID: BEJLGSBWAC03 / IC: 2703H-LGSBWAC03

Environment condition

Operating Temperature 0°C to 40°C (32°F to 104°F)

Operating Humidity Less than 80%

Storage Temperature -20°C to 60°C (-4°F to 140°F)

Storage Humidity Less than 85%

Open Source Software Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.

com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of

media, shipping, and handling) upon email request to opensourc[email protected].

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Licenses

(Magic Remote supported models only)

La page charge ...