Grandstream GHP620 Guide d'installation
- Catégorie
- Les routeurs
- Taper
- Guide d'installation
GHP620
GHP621
Compact Hotel Phone
Quick Installation Guide
Grandstream Networks, Inc.
126 Brookline Ave, 3rd Floor
Boston, MA 02215. USA
Tel : +1 (617) 566 - 9300
Fax: +1 (617) 249 - 1987
www.grandstream.com
For Certication, Warranty and RMA information, please visit
www.grandstream.com
~ 1 ~ ~ 2 ~
PACKAGE CONTENT:
PRECAUTIONS:
WARNING: Please DO NOT power cycle the GHP620 and GHP621
during system bootup or rmware upgrade. You may corrupt rmware
image les and cause the unit to malfunction.
1x GHP62X
Phone
1x Base Stand
1x Handset
1x Faceplate 1x RJ11(4P4C)
Phone Cord
1x Quick Installa-
tion Guide
The GHP620 and GHP621 are not pre-confgured to
support or carry emergency calls to any type of hospital,
law enforcement agency, medical care unit (“Emergency
Service(s)”), or any other kind of Emergency Service. You
must make additional arrangements to access Emergency
Services. It is your responsibility to purchase SIP-com-
pliant Internet telephone service, properly congure the
GHP620/ GHP621 to use that service, and peri-
odically test your conguration to conrm that it works as
you expect. If you do not do so, it is your responsibility to
purchase traditional wireless or landline telephone services
to access Emergency Services.
GRANDSTREAM DOES NOT PROVIDE CONNECTIONS
TO EMERGENCY SERVICES VIA THE GHP620 AND
THE GHP621. NEITHER GRANDSTREAM NOR ITS
OFFICERS, EMPLOYEES OR AFFILIATES MAY BE
HELD LIABLE FOR ANY CLAIM, DAMAGE, OR LOSS.
YOU HEREBY WAIVE ANY AND ALL SUCH CLAIMS OR
CAUSES OF ACTION ARISING FROM OR RELATING
TO YOUR INABILITY TO USE THE GHP620 AND
GHP621 TO CONTACT EMERGENCY SERVICES,
AND YOUR FAILURE TO MAKE ADDITIONAL ARRANGE-
MENTS TO ACCESS EMERGENCY SERVICES IN
ACCORDANCE WITH THE IMMEDIATELY PRECEDING
PARAGRAPH.
The GNU GPL license terms are incorporated into the
device rmware and can be accessed via the Web user
interface of the device at http(s)://IP/#/gpl_license.
To obtain a CD with GPL source code information please
submit a written request to [email protected]
EN
OVERVIEW:
The GHP series of hotel phones feature the GHP620 and the
GHP621, easy-to-use IP phones for any hotel room that can be
programmed and customized based on the needs of the hotel and
their guests. The GHP series features of the series include; one HD
speaker on each handset, 2 SIP accounts/lines, 6 programmable keys,
10 speed dial keys, 3-way voice conferencing, full band Opus voice
codec, and advanced jitter-resilience algorithm that tolerates up to
30% packet loss without impacting voice quality. The series is supported
by Grandstream’s Device Management System (GDMS), which provides
a centralized interface to congure, provision, manage and monitor the
deployment of Grand-stream endpoints. GHP series IP phones can be
installed on desktop or wall-mounted, and powered by PoE
(GHP620/GHP621) and USB Type C charging. Its compact design
makes it perfect for any hotel deployment. These IP Phones could also
be used for deployments in settings such as hospitals, apartments, dor-
mitories, and more.
~ 3 ~ ~ 4 ~
GHP620 & GHP621 DESCRIPTION:
Wall Mount
Front panel
Back panel
Desktop Installation
1. On the wall where the GHP620 & GHP621 will be mounted, mark two
dots with 100mm distance in between vertically.
2. Using a drill, make a hole on each marked dot. Put a plastic expansion bolt
and screw (not provided) into each hole. Leave enough space on the screws
to mount the GHP620 & GHP621.
3. Attach the wall mount spacers to the slot for wall mount spacers on the back
of the phone.
4. Mount the GHP620 & GHP621 on the screws using its “Wall Mount
Slots”.
Flash
Volume Down Key
Softkeys
Redial
Alphanumeric
Keypad
Mute Indicator
Volume Up Key
HoldSpeaker
LAN Port
Mute
USB Type-C
Port
Wall Mount Stand
Slots
Message
Power
Handset Port
Message Waiting
Indicator
Note: The LED for the message waiting indicator will ash in green when
there is a message waiting.
PHONE SETUP:
Desktop
Wall
For installing the phone on the table with the phone stand, attach the phone
stand to the bottom of the phone where there is a slot for the phone stand.
INSTALLING THE FACEPLATE:
1. Remove the release
paper from the back
of the faceplate.
2. Stick the faceplate on
the indicated area.
Please refer to the
illustration.
~ 5 ~
1. Plug in the phone cord to the handset RJ11 port and then connect it to the
base.
2. Connect the LAN port of the phone to the RJ45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable.
3. Power up the phone:
• For GHP620 & GHP621: A PoE switch must be used in step 2.
Refer to online documents and FAQ for more detailed
information: https://www.grandstream.com/our-products
CONNECTING THE PHONE:
To set up the phone, follow the steps below:
PHONE CONFIGURATION:
1. Ensure your phone is powered up and connected to the Internet.
2. Locate the MAC address on the bottom of the device or on the package.
3. From a computer connected to the same network as the GHP62X, type in
the following address using the GHP62X’s MAC address on your browser:
https://<mac>.local
Example: https://c074ad.local
Note: The user can also dial **47# and the current IP address will be
announced by the IVR.
4. Enter the admin username and password to access the conguration menu.
(The factory default username is “admin” and the default random password
can be found on the sticker at the back of the unit).
For certification information, please refer to User Manuals:
http://www.grandstream.com
U.S. FCC Part 68 Regulatory Information
This equipment complies with Part 68 of the FCC rules. Located on the
equipment is a label that contains, among other information, the ACTA
registration number and ringer equivalence number (REN.) If requested, this
information must be provided to the telephone company.
The REN is used to determine the quantity of devices which may be connected
to the telephone line. Excessive REN’s on the telephone line may result in the
devices not ringing in response to an incoming call. In most, but not all areas,
the sum of the REN’s should not exceed five (5.0). To be certain of the number
of devices that may be connected to the line, as determined by the total REN’s
contact the telephone company to determine the maximum REN for the calling
area.
This equipment cannot be used on the telephone company-provided coin
service. Connection to Party Line Service is subject to State Tariffs.
If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service
may be required. If advance notice isn’t practical, the telephone company will
notify the customer as soon as possible. Also, you will be advised of your right
the file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the operation of the equipment. If
this happens, the telephone company will provide advance notice in order for
you to make the necessary modifications in order to maintain uninterrupted
service.
If the trouble is causing harm to the telephone network, the telephone
company may request you to remove the equipment from the network until
the problem is resolved.
This equipment uses the following USOC jacks: RJ45C.
It is recommended that the customer install an AC surge arrester in the AC
outlet to which this device is connected. This is to avoid damaging the
equipment caused by local lightening strikes and other electrical surges.
If trouble is experienced with this equipment, please contact (Agent in the US):
Company Name: Grandstream Networks, Inc.
Address: 126 Brookline Ave, 3rd Floor Boston, MA 02215, USA
Tel: 1-617-5669300
Fax: 1-617-2491987
U.S. FCC Part 15 Regulatory Information
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) this device may not cause harmful interference,
and(2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Canada Regulatory Information
This product meets the applicable Innovation, Science and Economic
Development Canada technical specifications.
The Ringer Equivalence Number (REN) indicates the maximum number of
devices allowed to be connected to a telephone interface. The termination of
an interface may consist of any combination of devices subject only to the
requirement that the sum of the RENs of all the devices not exceed five.
Ce produit répond à la innovation, des sciences et de Développement
économique Canada spécifications techniques applicables.
Le nombre équivalent de sonneries (REN) indique le nombre maximal de
terminaux qui peuvent être raccordés à une interface téléphonique. La
terminaison d'une interface peut consister en une combinaison de dispositifs, à
la seule condition que la somme des REN de tous les dispositifs ne dépasse pas
cinq.
EU Regulatory Information
Hereby, [Grandstream Networks, Inc.] declares that the radio equipment type
[GHP621，GHP620] is in compliance with Directive 2014/30/EU.
The full text of the EU declaration of conformity is available at the following
internet address: www.grandstream.com
UK Regulatory Information
Hereby, [Grandstream Networks, Inc.] declares that the radio equipment
type [GHP621，GHP620] is in compliance with UK SI 2016 No. 1091
The full text of the UK declaration of conformity is available at the following
internet address: www.grandstream.com
-
1
-
2
-
3
-
4
-
5
-
6
Grandstream GHP620 Guide d'installation
- Catégorie
- Les routeurs
- Taper
- Guide d'installation