EDIFIER W220T Manuel utilisateur

Marque: EDIFIER

Modèle: W220T

Taper: Manuel utilisateur

W220T说明书25国语言（英语(EN)、法语(FR)、西班牙语(ES)、德语(DE)、意大利语(IT)、葡萄牙语(PT)、日语(JP)、波兰语(PL)、捷克语(CZ)、斯洛伐克语(SK)、乌克兰语(UKR)、希腊语(GR)、俄语(RU)、

土耳其语(TR)、保加利亚语(BG)、荷兰语(NL)、丹麦语(DK)、瑞典语(SV)、韩语(KR)、越南语(VN)、泰语(THAI)、印尼语(ID)、阿拉伯语(SA)、希伯来语(HEB)、繁体中文(CN）

材质：65g哑光铜版纸

工艺：单色正反面印刷

尺寸：55x70mm

页面数：，对折打钉

For more information, please visit our website:

www.edifier.com

@Edifier_Global @Edifier_Global@Edifierglobal

Charging

Model: EDF200089

Edifier International Limited

P.O. Box 6264

General Post Office

Hong Kong

www.edifier.com

Printed in China

NOTICE:

For the need of technical improvement and system upgrade,

information contained herein may be subject to change from time to

time without prior notice.

Products of EDIFIER will be customized for different applications.

Pictures and illustrations shown on this manual may be slightly

different from actual product.

If any difference is found, the actual product prevails.

V1.0

1.Earbuds placed in the case and keep the

case open.

2.Press and hold the button on the case for

about 3s. White and green LEDs will blink

alternately.

3.Select "EDIFIER W220T" in your device

setting to connect. White LED will blink

once and then turn off when successfully.

1st Pairing

1. Earbuds placed in the case and keep the case open. White and green LEDs will

blink alternately.

2. Select "EDIFIER W220T" in your device setting to connect. White LED will blink

once and then turn off when successfully.

Note

For subsequent use, the earbuds will automatically connect to the device used last

time.

1. Earbuds placed in the case and keep the

case open.

2. Press the button on the case 3 times to

re-enter left & right connection and clear

pairing records, white LED will blink slowly.

3. Select "EDIFIER W220T" in your device

setting to connect. White and green

LEDs will blink alternately, then white

LED will blink once and turn off when

successfully.

Pinch Area Pinch Area

1. Pair device A with the earbuds. Upon success, keep the earbuds in the case and

keep the case open, then press and hold the button on the case for about 3S to

re-enter the pairing mode.

2. Select "EDIFIER W220T" in device B to connect succesfully.

3. Select "EDIFIER W220T" in device A to connect manually. White LED will blink

once and then turn off when successfully.

Charging case

1. Please connect the case to power source with the included

Type-C charging cable for charging.

2. Orange LED is steady lit when charging and off when fully

charged.

Note:

Please do not charge the earbuds when there is sweat or

other liquids inside the charging port, which may damage the

earbuds.

Input: 5V 200mA(Earbuds)

5V 1A(Charging case)

1 2 3

Pairing

Power ON/OFF

1.Power ON when the case is

opened.

2.Power OFF when placed in

the case and the case is closed.

Note:

If there is no Bluetooth connection for 10 minutes after power on, the earbuds will

turn off automatically.

Reset

Note:

1. Easily pinch the debossed area of earbuds stem to select functions.

2. Images are for illustrative purposes only and may differ from the actual product.

3. Download Edifier Connect App for more customizable control settings.

Controls

Dual Connectivity

x3x3

2s2s

x1x1

x2x2

True Wireless Earbuds Headphones

W220T

Manual

Orange LED

充電

1. 耳機放入充電盒中並開蓋。

2. 長按充電盒按鍵約3秒，進入藍

牙配對，充電盒白色和綠色指示

燈交替閃爍。

3. 在設備上搜索 “EDIFIER W220T”

選擇連接，連接成功後，充電盒白

色指示燈閃1下後熄滅。

首次配對

1. 耳機放入充電盒中並開蓋。充電盒白色和綠色指示燈交替閃爍。

2. 在設備上搜索 “EDIFIER W220T” 選擇連接，連接成功後，充電盒白

色指示燈閃1下後熄滅。

注意:

再次開機，耳機可自動回連最後一次連接過的設備。

1. 耳機放入充電盒中並開蓋。

2. 充電盒按鍵按3次，重新進入左

右耳配對並清除藍牙配對記錄，

此時，充電盒白色指示燈慢閃，

左右耳配對成功後，進入藍牙配

對模式。

3. 在設備上搜索 “EDIFIER W220T”

選擇連接，此時，充電盒白色和綠色

指示燈交替閃爍，連接成功後，充電盒白色指示燈閃1下後熄滅。

1. 把A設備與耳機進行配對連接，連接成功後，耳機放入充電盒中並開

蓋, 長按充電盒按鍵3S重新進入配對模式。

2. 在B設備搜索 “EDIFIER W220T”並與耳機成功連接。

3. 在A設備上手動點擊“EDIFIER W220T”並與耳機連接，即完成一拖二。

連接成功後，充電盒白色指示燈閃1下後熄滅。

充電盒充電

1. 請接入本產品包裝盒內附帶的Type-C充電線，連接

電源充電。

2. 充電時，充電盒橙色指示燈常亮；充滿後熄滅。

注意：

請勿在充電口有汗液或其他液體時對耳機進行充電，

有可能對耳機元器件造成損壞！

輸入： 5V 200mA(耳機）

5V 1A(充電盒）

1 2 3

配對

開/關機

1. 充電盒開蓋，耳機自動開機。

2. 耳機放入充電盒並關蓋自

動關機。

注意:

如果耳機開機10分鐘後無藍牙連接，耳機則自動關機。

重置

注意：

1. 在耳機柄凹凸區域通過按壓即可輕鬆進行功能操作。

2. 本說明書中的圖片均為示意圖，可能與實物有偏差，請以實物為准。

3. 更多拓展功能可通過Ediﬁer Connect App來操作。

控制

耳機一拖二

x3x3

2s2s

x1x1

x2x2

指示燈

橙色指示燈

80 8180

Snapdragon Sound is a product of Qualcomm Technologies, Inc. and/or its

subsidiaries. Snapdragon and Snapdragon Sound are trademarks or registered

trademarks of Qualcomm Incorporated.

Input: 5V 200mA(Earbuds)

5V 1A(Charging case)

Declaration for EU

Frequency Band: 2400Mhz - 2483.5Mhz

RF Power Output: ≤** dBm (EIRP)

There is no restriction of use.

FCC statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

IC statement:CAN ICES-3(B)/NMB-3(B).

FCC ID: Z9G-EDF184

IC:10004A-EDF184

Hereby, Edifier International Limited declares that the radio equipment type

EDF200089 is in compliance with Directive 2014/53/EU. The full text of the EU

declaration of conformity is available at the following internet address:

https://www.edifier.com/int/eu-doc.html

产品中有害物质的名称及含量

設備名稱 Equipment name：name：半入耳真無線耳機

型號 (型式) Type designation (Type)：EDF200089

限用物質及其化學符號

Restricted substances and its chemical symbols

單元

Unit

鉛

Lead

金屬零件

超出

0.1 wt %

塑膠零件

○

電纜

電路板元件

○

六價鉻

Hexavalent

chromium

(Cr )

○

備註1.〝超出0.1 wt %〞及〝超出0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。

Note 1“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds

the reference percentage value of presence condition.

備

註

2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。

Note 2“ ○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presen ce

備

註

3.〝－〞係指該項限用物質為排除項目。

Note 3The “−” indicates that the restricted substance corresponds to the exemption

汞

Mercury

(Hg)

○

鎘

Cadmium

(Cd)

○

多溴聯苯

Polybrominated

biphenyls

(PBB)

○

多溴二苯醚

Polybrominated

diphenyl ethers

(PBDE)

○

NCC聲明：

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得

擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之

使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停

用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規

定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫

療用電波輻射性電機設備之干擾。

Edifier Connect

Scan and download

Edifier Connect App

Edifier Connect

App Store

Download on the

Get It on

指示燈按鍵

Indicator

Indicator Button

指示燈按鍵

按壓區域按壓區域

XXX-XXXXXX

ISED Regulatory compliance

This device contains licence-exempt transmitters that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

This device may not cause interference.

This device must accept any interference, including interference that may cause undesired operation of the device.

L’émetteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada

applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :

L’appareil ne doit pas produire de brouillage;

L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment.

Cet équipement est conforme aux limites d'exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé.

FCC Regulatory Compliance

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Compliance

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

IB-200-000000-14

版面设计：