Get Started and Download
Your Included Learning Apps
Read all the Operating & Important Safety Instructions before using LEAPPAD™ ULTRA.
ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 3 years of age. As with all electrical products,
precautions should be observed during the handling and use to prevent electrical shock.
FOR INDOOR, DRY-LOCATION USE ONLY
Get started in 5 easy steps!
1. POWER UP and turn on your LeapPad Ultra with the included
wall charger.*
2. SET UP your device by following the on-screen prompts to
connect to Wi-Fi.**
3. REGISTER your device by creating a LeapFrog Parent Account.
4. DOWNLOAD your included learning games.
5. PLAY & LEARN! Your child is now ready to play your
LeapPad Ultra.***
*Registration and device set-up can continue while charging—
charging may take up to 7 hours.
**If Wi-Fi is not available at time of device set-up, you can complete
set-up using the included USB cable and by installing the LeapFrog
Connect Application on your computer. Go to leapfrog.com/connect
to download.
***Full device set-up may take approximately 20 minutes or longer
depending on your Wi-Fi connection speed.
Get your included learning apps when
you complete device set-up!
Visit leapfrog.com/support for additional tips
and FAQs.
Parent Settings
Parent Settings allows you to control your child’s play on these interactive
LEAPPAD™ ULTRA features:
• Wireless settings — Control connection set-up and access to LeapFrog-defined
online experiences.
• Child profile — Easily manage permissions and profile information or add a new profile.
• Peer-to-peer settings — Control how your child plays with other children through their
pet avatars when two LeapPad Ultra devices are in close proximity to one another via
local ad hoc Wi-Fi network.
• App Center /Centre — Parents can purchase digital content directly from the device
with a Parent Account password. Control your child’s access to the App Center/Centre,
where they can watch trailers and create a wish list. Parents can choose whether
children may view pricing and buy buttons.
• Manage Content — Choose what content you want to store on and off the device.
•
Artwork Storage — Store child-created pictures, photos and video on and off the device.
• Device Settings — Manage settings like language, time, date and more.
Access to Parent Settings is protected by a 4-digit parent lock code that must be estab-
lished during initial set-up. Parent Settings can be accessed from the Sign In screen by
pressing the Parent Settings icon to login with your parent lock. Alternatively, you can log
in via the Settings icon on the Home Bar of the child’s Home Screen.
Forgetting or resetting your Parent Lock
If you have forgotten your 4-digit parent lock code you can look it up in the leapfrog.com
Parent Account you created during device set-up and registration. If you need to reset your par-
ent lock, you can do it from the device or reference the FAQ section for more information.
Operating Instructions
Wi-Fi connection support. If you experience any difficulty with Wi-Fi connectivity,
troubleshooting suggestions are available online at www.leapfrog.com/support
For indoor, dry-location use only. Do not use the product near a sink or other wet
locations. Take care not to spill food or any kind of liquid on this product as it may render
it inoperable and not serviceable. In case the unit does get wet, unplug all cables and turn
it OFF. Allow to dry thoroughly before reusing. Do not attempt to dry with a hair dryer or
other heat source. Do not re-connect to the AC outlet if wet or damaged.
Avoid prolonged exposure to extreme temperatures and direct sunlight. Operate in
places with temperatures ranging from 5°C (40°F) and 38°C (100°F). Do not leave the
product in your car as the temperatures in parked cars can exceed the acceptable storage
temperature. Exposure to extreme temperatures can result in shortened battery life or
cause the product to temporarily stop working.
Handle with care. To avoid injury, damage to this product or other property, avoid
dropping and never disassemble, crush, puncture, microwave, incinerate, insert foreign
objects or paint the product. Clean your hands before handling the product if they have
been exposed to suntan lotions or other chemicals.
Cleaning. Disconnect all cords before cleaning. Clean the product with a slightly damp
cloth (cold water). Do not use soap, detergent or other chemicals. Never submerge the
unit in water. Allow to dry thoroughly before re-use.
Do not connect to the AC wall outlet if wet or damaged.
Instructions Operationnelles
Connexion Wi-fi. Si vous avez des difficultés à vous connecter à votre connexion Wi-fi,
des aides sont disponibles en ligne à www.LeapFrog.com/support
A utiliser uniquement en intérieur, dans un endroit sec. Ne pas utiliser le produit près
d’un lavabo ou autres sources d’eau. Faites attention à ne pas renverser de nourriture
ou tout autre sorte de liquide sur ce produit car cela pourrait le rendre in opérationnel
et inutilisable. Si vous renversez du liquide sur le produit, débranchez tous les câbles et
éteignez-le. Laissez le produit sécher complètement avant de le réutiliser. N’essayez pas
de le sécher avec un sèche-cheveux ou tout autre source de chaleur. Ne pas rebrancher le
produit à l’adaptateur si celui- ci est humide ou abimé.
Évitez d’exposer le produit à des températures extrêmes ou aux rayons du soleil.
Utilisez le produit quand la température se trouve entre 5ºC (40ºF) et 38ºC (100ºF).
Ne pas laisser le produit dans votre voiture car les voitures garées peuvent excéder les
températures pour assurer le bon fonctionnement de votre produit. Exposer ce produit
à des températures extrêmes peut diminuer la durée de vie des piles ou peut entrainer
l’arrêt de votre produit.
A utiliser soigneusement. Pour éviter toutes blessures, dommages ou autres, évitez de
le faire tomber et ne jamais le démonter, casser, trouer, mettre aux micro-ondes, bruler,
incérer un objet ou peindre le produit. Lavez vos mains avant de manipuler le produit si
celles-ci ont été en contact avec de la crème solaire ou autres produits chimiques.
Pour nettoyer. Débranchez le produit de tous ces câbles. Nettoyez le produit avec un
chiffon légèrement humide (eau froide). N’utilisez pas de savon, de lessive ou autres
produits chimiques. Ne jamais immerger le produit dans l’eau.
Ne pas brancher à une prise si le produit est humide ou endommagé.
Important Safety Instructions:
Please read all the Important Safety Instructions prior to using LEAPPAD™ ULTRA.
Failure to follow these safety instructions could result in fire, electric shock, or other injury
or damage to LEAPPAD ULTRA or other property.
ACCESSORIES: Please read all safety instructions for any accessories or other products
before using with LEAPPAD ULTRA. LeapFrog is not responsible for the operation of third-
party accessories or their compliance with safety and regulatory standards.
CAUTION: Routinely check this toy for proper and safe condition. If there is any dam-
age or broken parts, remove toy from use.
WARNING: The AC Adapter or USB cords could be a strangulation hazard. Not for
children under 3 years.
CAUTION: If for any reason the screen (display) is fractured or cracked, immediately
remove this product from use.
PROTECT YOUR HEARING: Long-term exposure to loud sounds, at high volume,
may result in permanent hearing loss. When using headphones or ear buds, it is recom-
mended that the product is listened to at lower volumes for shorter periods of time. Set
the volume while in a quiet environment; turn the volume down if you cannot hear people
speaking near you. Limit the listening time to 90 minutes, followed by a quiet period. The
louder the volume, the less time required before your hearing may be affected. If you ex-
perience ringing in your ears or hear muffled speech, stop listening and have your hearing
checked.
WARNING: It is rare but possible for seizures to be triggered by light flashes or pat-
terns. Play/watch in a well-lit room and take 10 to 15 minute breaks every hour.
Battery Replacement
WARNING: The lithium rechargeable battery cannot be removed from the product.
For your safety, never try to remove the battery. For power or battery issues, please contact
LeapFrog customer support. Contact information for your local support is available at www.
leapfrog.com/support
Battery Charging
LEAPPAD ULTRA is equipped with a rechargeable lithium-polymer battery. It will require
about 4 hours of charging using the included AC power adapter prior to use. Attempting to
charge via connection to the computer will take much longer.
CAUTION: The battery is only to be charged by adults or children 8+ years of age un-
der the full supervision of parents. You can charge the battery by using either the included
AC power adapter or connecting the provided USB cord to your computer. We recommend
using the provided AC power adapter.
Battery Charging in Progress Indication
When the battery is charging, the charge indicator LED will be yellow. When fully charged,
it will turn green. It will be OFF if not connected via USB or if not charging.
Repairing or Modifying LeapPad Ultra
Never attempt to repair or modify as LEAPPAD™ ULTRA does not contain any user-
serviceable parts. Service should only be provided by LeapFrog Enterprises, Inc.
If the product has been in contact with liquids, punctured, or subjected to a severe impact
or fall, immediately remove this product from use and contact LeapFrog Consumer Ser-
vices for replacement if under warranty.
For service information, go to: www.leapfrog.com/support
AC Adapter Safety
CAUTION: Use only the AC adapter provided with the product.
WARNING: Not suitable for children under 36 months. Misuse of transformer (AC
Adapter) can cause electric shock.
(Note: The word “transformer” is sometimes substituted for the word “adapter”. Use only
the included AC power adapter.
• Connection of the transformer to the wall outlet should be performed only by an adult
or child 8+ years of age.
• The transformer is not intended to be used as a toy, and the use of the transformer shall
be under the full supervision of parents.
• As with all electrical products, precautions should be observed during handling and use
to prevent electrical shock.
• The power adapter may become warm during normal use. Always allow adequate
ventilation and use care when handling the power adapter.
• Do not connect or disconnect with wet hands.
• The transformer should be periodically examined for conditions that may result in
the risk of fire, electrical shock or injury to persons, such as damage to the cord, plug,
blades, housing or other parts, and in the event of such conditions, the transformer
must not be used until the damage is repaired. The cord of this transformer cannot be
replaced; if the cord is damaged, dispose of the transformer in accordance with your
local electrical product recycling regulations.
Unplug the AC Adapter (transformer) if any of the following conditions exist:
• The power cord or plug, or the USB cord has become frayed or damaged.
• The power adapter is exposed to rain, liquid, or excessive moisture.
• The power adapter enclosure has become damaged.
• You suspect the power adapter needs service or repair.
To Clean AC Adapter, disconnect it from the wall and clean with a cloth dampened with
water. Do not immerse in water or use soap or other chemicals. Allow to dry before
reusing. Do not connect to the AC outlet if wet or damaged.
• This AC adapter can be used to recharge the single cell Li-Poly battery of the LeapFrog®
LEAPPAD ULTRA device (3.7Vdc, 4000mAh).
WARNING: DO NOT recharge non-rechargeable batteries.
For Europe - The toy must be used with a transformer for toys.
AC Adapter Electrical Ratings: Input: ~ 120VAC, 60Hz (for US); ~ 230VAC, 50Hz (for UK
or EU); ~ 240VAC, 50Hz (for AS/NZL) Output: DC5V, 1.5A, 7.5VA
Informations Importantes de sécurité :
Veuillez lire toutes les informations importantes de sécurité avant d’utiliser le LEAPPAD™ ULTRA.
Ne pas appliquer ces consignes peut engendrer des risques d’incendie, d’électrocutions, autres
blessures ou dommages au LEAPPAD ULTRA ou autres.
ACCESSOIRES : Lisez les instructions pour les accessoires ou tout autre produit avant de
les utiliser avec le LEAPPAD ULTRA. LeapFrog n’est pas responsable pour les accessoires
vendus par d’autres fabricants et leurs standards de sécurité.
ATTENTION : Vérifiez régulièrement que ce jouet est en bon état et qu’il ne présen-
te pas de danger. Dans le cas contraire (par exemple, s’il est cassé à certains endroits),
tenez ce jouet hors de portée des enfants.
ATTENTION : L’adaptateur AC ou le câble USB peuvent provoquer un risque
d’étranglement. Ne convient pas aux enfants de moins de 3 ans.
ATTENTION : Si pour quelque raison que ce soit, l’écran (d’affichage) est brisé ou
fendu, mettez immédiatement ce produit hors de portée des enfants.
PROTÉGEZ VOTRE OUÏE : Une exposition durable à des sonorités trop fortes peut
entraîner une perte définitive de l’ouïe. Lorsque vous utilisez le casque ou les écou-
teurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez
le son lorsque vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les
personnes qui parlent autour de vous. Limitez le temps d’écoute à 90 minutes, puis
accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de chances
que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou
si vous entendez des voix sourdes, arrêtez immédiatement d’écouter ce produit et faites
contrôler votre ouïe dans les plus brefs délais.
ATTENTION : Il est rare mais possible que les lumières clignotantes ou les formes
provoquent des crises d’épilepsies. Jouez/regardez dans une pièce bien éclairée et prenez
des poses de 10 à 15 minutes toutes les heures.
Replacement des piles
ATTENTION : La pile rechargeable lithium ne peut être retirée de ce produit. Pour
votre sécurité, n’essayez jamais de retirer la pile. Si vous avez des problèmes concernant
la pile ou la batterie de votre produit, veuillez contacter le service client LeapFrog. Les
coordonnées sont disponibles à www.leapfrog.com/support
Recharger les piles
Le LEAPPAD ULTRA est équipé d’une pile lithium-polymère. Branchez-le avec l’adaptateur
AC pendant 4 heures avant de l’utiliser. Le recharger avec un ordinateur prendra plus de
temps.
ATTENTION : L’adaptateur et le cordon USB peuvent constituer un risque
d’étranglement. Ils ne doivent pas être utilisé par les enfants de moins de 3 ans. AT-
TENTION : Ne convient pas aux enfants de moins de 36 mois. L’utilisation inadaptée de
l’adaptateur peut causer une électrocution.
ATTENTION : La pile ne doit être chargée que par un adulte ou enfants de plus de
8 ans sous la supervision d’un parent exclusivement. Vous pouvez recharger la pile en
utilisant l’adaptateur AC ou en connectant le produit à votre ordinateur avec le câble USB
fournis. Nous recommandons l’utilisation de ceux inclus.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference. Ce guide
contient des informations importantes. Veuillez le conserver pour toute référence future.
USB Connector/
Charger
Power
Button
Volume Buttons
D-Pad
Cartridge Slot
Home Button
Camera/
Video
Recorder
Camera/
Video
Recorder
Charging
Light
Stylus Stylus Tether Points
Headphone Jack
Microphone
Speaker
™
Get Started and Download
Your Included Learning Apps
Read all the Operating & Important Safety Instructions before using LEAPPAD™ ULTRA.
ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 3 years of age. As with all electrical products,
precautions should be observed during the handling and use to prevent electrical shock.
FOR INDOOR, DRY-LOCATION USE ONLY
Get started in 5 easy steps!
1. POWER UP and turn on your LeapPad Ultra with the included
wall charger.*
2. SET UP your device by following the on-screen prompts to
connect to Wi-Fi.**
3. REGISTER your device by creating a LeapFrog Parent Account.
4. DOWNLOAD your included learning games.
5. PLAY & LEARN! Your child is now ready to play your
LeapPad Ultra.***
*Registration and device set-up can continue while charging—
charging may take up to 7 hours.
**If Wi-Fi is not available at time of device set-up, you can complete
set-up using the included USB cable and by installing the LeapFrog
Connect Application on your computer. Go to leapfrog.com/connect
to download.
***Full device set-up may take approximately 20 minutes or longer
depending on your Wi-Fi connection speed.
Get your included learning apps when
you complete device set-up!
Visit leapfrog.com/support for additional tips
and FAQs.
Parent Settings
Parent Settings allows you to control your child’s play on these interactive
LEAPPAD™ ULTRA features:
• Wireless settings — Control connection set-up and access to LeapFrog-defined
online experiences.
• Child profile — Easily manage permissions and profile information or add a new profile.
• Peer-to-peer settings — Control how your child plays with other children through their
pet avatars when two LeapPad Ultra devices are in close proximity to one another via
local ad hoc Wi-Fi network.
• App Center /Centre — Parents can purchase digital content directly from the device
with a Parent Account password. Control your child’s access to the App Center/Centre,
where they can watch trailers and create a wish list. Parents can choose whether
children may view pricing and buy buttons.
• Manage Content — Choose what content you want to store on and off the device.
•
Artwork Storage — Store child-created pictures, photos and video on and off the device.
• Device Settings — Manage settings like language, time, date and more.
Access to Parent Settings is protected by a 4-digit parent lock code that must be estab-
lished during initial set-up. Parent Settings can be accessed from the Sign In screen by
pressing the Parent Settings icon to login with your parent lock. Alternatively, you can log
in via the Settings icon on the Home Bar of the child’s Home Screen.
Forgetting or resetting your Parent Lock
If you have forgotten your 4-digit parent lock code you can look it up in the leapfrog.com
Parent Account you created during device set-up and registration. If you need to reset your par-
ent lock, you can do it from the device or reference the FAQ section for more information.
Operating Instructions
Wi-Fi connection support. If you experience any difficulty with Wi-Fi connectivity,
troubleshooting suggestions are available online at www.leapfrog.com/support
For indoor, dry-location use only. Do not use the product near a sink or other wet
locations. Take care not to spill food or any kind of liquid on this product as it may render
it inoperable and not serviceable. In case the unit does get wet, unplug all cables and turn
it OFF. Allow to dry thoroughly before reusing. Do not attempt to dry with a hair dryer or
other heat source. Do not re-connect to the AC outlet if wet or damaged.
Avoid prolonged exposure to extreme temperatures and direct sunlight. Operate in
places with temperatures ranging from 5°C (40°F) and 38°C (100°F). Do not leave the
product in your car as the temperatures in parked cars can exceed the acceptable storage
temperature. Exposure to extreme temperatures can result in shortened battery life or
cause the product to temporarily stop working.
Handle with care. To avoid injury, damage to this product or other property, avoid
dropping and never disassemble, crush, puncture, microwave, incinerate, insert foreign
objects or paint the product. Clean your hands before handling the product if they have
been exposed to suntan lotions or other chemicals.
Cleaning. Disconnect all cords before cleaning. Clean the product with a slightly damp
cloth (cold water). Do not use soap, detergent or other chemicals. Never submerge the
unit in water. Allow to dry thoroughly before re-use.
Do not connect to the AC wall outlet if wet or damaged.
Instructions Operationnelles
Connexion Wi-fi. Si vous avez des difficultés à vous connecter à votre connexion Wi-fi,
des aides sont disponibles en ligne à www.LeapFrog.com/support
A utiliser uniquement en intérieur, dans un endroit sec. Ne pas utiliser le produit près
d’un lavabo ou autres sources d’eau. Faites attention à ne pas renverser de nourriture
ou tout autre sorte de liquide sur ce produit car cela pourrait le rendre in opérationnel
et inutilisable. Si vous renversez du liquide sur le produit, débranchez tous les câbles et
éteignez-le. Laissez le produit sécher complètement avant de le réutiliser. N’essayez pas
de le sécher avec un sèche-cheveux ou tout autre source de chaleur. Ne pas rebrancher le
produit à l’adaptateur si celui- ci est humide ou abimé.
Évitez d’exposer le produit à des températures extrêmes ou aux rayons du soleil.
Utilisez le produit quand la température se trouve entre 5ºC (40ºF) et 38ºC (100ºF).
Ne pas laisser le produit dans votre voiture car les voitures garées peuvent excéder les
températures pour assurer le bon fonctionnement de votre produit. Exposer ce produit
à des températures extrêmes peut diminuer la durée de vie des piles ou peut entrainer
l’arrêt de votre produit.
A utiliser soigneusement. Pour éviter toutes blessures, dommages ou autres, évitez de
le faire tomber et ne jamais le démonter, casser, trouer, mettre aux micro-ondes, bruler,
incérer un objet ou peindre le produit. Lavez vos mains avant de manipuler le produit si
celles-ci ont été en contact avec de la crème solaire ou autres produits chimiques.
Pour nettoyer. Débranchez le produit de tous ces câbles. Nettoyez le produit avec un
chiffon légèrement humide (eau froide). N’utilisez pas de savon, de lessive ou autres
produits chimiques. Ne jamais immerger le produit dans l’eau.
Ne pas brancher à une prise si le produit est humide ou endommagé.
Important Safety Instructions:
Please read all the Important Safety Instructions prior to using LEAPPAD™ ULTRA.
Failure to follow these safety instructions could result in fire, electric shock, or other injury
or damage to LEAPPAD ULTRA or other property.
ACCESSORIES: Please read all safety instructions for any accessories or other products
before using with LEAPPAD ULTRA. LeapFrog is not responsible for the operation of third-
party accessories or their compliance with safety and regulatory standards.
CAUTION: Routinely check this toy for proper and safe condition. If there is any dam-
age or broken parts, remove toy from use.
WARNING: The AC Adapter or USB cords could be a strangulation hazard. Not for
children under 3 years.
CAUTION: If for any reason the screen (display) is fractured or cracked, immediately
remove this product from use.
PROTECT YOUR HEARING: Long-term exposure to loud sounds, at high volume,
may result in permanent hearing loss. When using headphones or ear buds, it is recom-
mended that the product is listened to at lower volumes for shorter periods of time. Set
the volume while in a quiet environment; turn the volume down if you cannot hear people
speaking near you. Limit the listening time to 90 minutes, followed by a quiet period. The
louder the volume, the less time required before your hearing may be affected. If you ex-
perience ringing in your ears or hear muffled speech, stop listening and have your hearing
checked.
WARNING: It is rare but possible for seizures to be triggered by light flashes or pat-
terns. Play/watch in a well-lit room and take 10 to 15 minute breaks every hour.
Battery Replacement
WARNING: The lithium rechargeable battery cannot be removed from the product.
For your safety, never try to remove the battery. For power or battery issues, please contact
LeapFrog customer support. Contact information for your local support is available at www.
leapfrog.com/support
Battery Charging
LEAPPAD ULTRA is equipped with a rechargeable lithium-polymer battery. It will require
about 4 hours of charging using the included AC power adapter prior to use. Attempting to
charge via connection to the computer will take much longer.
CAUTION: The battery is only to be charged by adults or children 8+ years of age un-
der the full supervision of parents. You can charge the battery by using either the included
AC power adapter or connecting the provided USB cord to your computer. We recommend
using the provided AC power adapter.
Battery Charging in Progress Indication
When the battery is charging, the charge indicator LED will be yellow. When fully charged,
it will turn green. It will be OFF if not connected via USB or if not charging.
Repairing or Modifying LeapPad Ultra
Never attempt to repair or modify as LEAPPAD™ ULTRA does not contain any user-
serviceable parts. Service should only be provided by LeapFrog Enterprises, Inc.
If the product has been in contact with liquids, punctured, or subjected to a severe impact
or fall, immediately remove this product from use and contact LeapFrog Consumer Ser-
vices for replacement if under warranty.
For service information, go to: www.leapfrog.com/support
AC Adapter Safety
CAUTION: Use only the AC adapter provided with the product.
WARNING: Not suitable for children under 36 months. Misuse of transformer (AC
Adapter) can cause electric shock.
(Note: The word “transformer” is sometimes substituted for the word “adapter”. Use only
the included AC power adapter.
• Connection of the transformer to the wall outlet should be performed only by an adult
or child 8+ years of age.
• The transformer is not intended to be used as a toy, and the use of the transformer shall
be under the full supervision of parents.
• As with all electrical products, precautions should be observed during handling and use
to prevent electrical shock.
• The power adapter may become warm during normal use. Always allow adequate
ventilation and use care when handling the power adapter.
• Do not connect or disconnect with wet hands.
• The transformer should be periodically examined for conditions that may result in
the risk of fire, electrical shock or injury to persons, such as damage to the cord, plug,
blades, housing or other parts, and in the event of such conditions, the transformer
must not be used until the damage is repaired. The cord of this transformer cannot be
replaced; if the cord is damaged, dispose of the transformer in accordance with your
local electrical product recycling regulations.
Unplug the AC Adapter (transformer) if any of the following conditions exist:
• The power cord or plug, or the USB cord has become frayed or damaged.
• The power adapter is exposed to rain, liquid, or excessive moisture.
• The power adapter enclosure has become damaged.
• You suspect the power adapter needs service or repair.
To Clean AC Adapter, disconnect it from the wall and clean with a cloth dampened with
water. Do not immerse in water or use soap or other chemicals. Allow to dry before
reusing. Do not connect to the AC outlet if wet or damaged.
• This AC adapter can be used to recharge the single cell Li-Poly battery of the LeapFrog®
LEAPPAD ULTRA device (3.7Vdc, 4000mAh).
WARNING: DO NOT recharge non-rechargeable batteries.
For Europe - The toy must be used with a transformer for toys.
AC Adapter Electrical Ratings: Input: ~ 120VAC, 60Hz (for US); ~ 230VAC, 50Hz (for UK
or EU); ~ 240VAC, 50Hz (for AS/NZL) Output: DC5V, 1.5A, 7.5VA
Informations Importantes de sécurité :
Veuillez lire toutes les informations importantes de sécurité avant d’utiliser le LEAPPAD™ ULTRA.
Ne pas appliquer ces consignes peut engendrer des risques d’incendie, d’électrocutions, autres
blessures ou dommages au LEAPPAD ULTRA ou autres.
ACCESSOIRES : Lisez les instructions pour les accessoires ou tout autre produit avant de
les utiliser avec le LEAPPAD ULTRA. LeapFrog n’est pas responsable pour les accessoires
vendus par d’autres fabricants et leurs standards de sécurité.
ATTENTION : Vérifiez régulièrement que ce jouet est en bon état et qu’il ne présen-
te pas de danger. Dans le cas contraire (par exemple, s’il est cassé à certains endroits),
tenez ce jouet hors de portée des enfants.
ATTENTION : L’adaptateur AC ou le câble USB peuvent provoquer un risque
d’étranglement. Ne convient pas aux enfants de moins de 3 ans.
ATTENTION : Si pour quelque raison que ce soit, l’écran (d’affichage) est brisé ou
fendu, mettez immédiatement ce produit hors de portée des enfants.
PROTÉGEZ VOTRE OUÏE : Une exposition durable à des sonorités trop fortes peut
entraîner une perte définitive de l’ouïe. Lorsque vous utilisez le casque ou les écou-
teurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez
le son lorsque vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les
personnes qui parlent autour de vous. Limitez le temps d’écoute à 90 minutes, puis
accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de chances
que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou
si vous entendez des voix sourdes, arrêtez immédiatement d’écouter ce produit et faites
contrôler votre ouïe dans les plus brefs délais.
ATTENTION : Il est rare mais possible que les lumières clignotantes ou les formes
provoquent des crises d’épilepsies. Jouez/regardez dans une pièce bien éclairée et prenez
des poses de 10 à 15 minutes toutes les heures.
Replacement des piles
ATTENTION : La pile rechargeable lithium ne peut être retirée de ce produit. Pour
votre sécurité, n’essayez jamais de retirer la pile. Si vous avez des problèmes concernant
la pile ou la batterie de votre produit, veuillez contacter le service client LeapFrog. Les
coordonnées sont disponibles à www.leapfrog.com/support
Recharger les piles
Le LEAPPAD ULTRA est équipé d’une pile lithium-polymère. Branchez-le avec l’adaptateur
AC pendant 4 heures avant de l’utiliser. Le recharger avec un ordinateur prendra plus de
temps.
ATTENTION : L’adaptateur et le cordon USB peuvent constituer un risque
d’étranglement. Ils ne doivent pas être utilisé par les enfants de moins de 3 ans. AT-
TENTION : Ne convient pas aux enfants de moins de 36 mois. L’utilisation inadaptée de
l’adaptateur peut causer une électrocution.
ATTENTION : La pile ne doit être chargée que par un adulte ou enfants de plus de
8 ans sous la supervision d’un parent exclusivement. Vous pouvez recharger la pile en
utilisant l’adaptateur AC ou en connectant le produit à votre ordinateur avec le câble USB
fournis. Nous recommandons l’utilisation de ceux inclus.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference. Ce guide
contient des informations importantes. Veuillez le conserver pour toute référence future.
USB Connector/
Charger
Power
Button
Volume Buttons
D-Pad
Cartridge Slot
Home Button
Camera/
Video
Recorder
Camera/
Video
Recorder
Charging
Light
Stylus Stylus Tether Points
Headphone Jack
Microphone
Speaker
™
Get Started and Download
Your Included Learning Apps
Read all the Operating & Important Safety Instructions before using LEAPPAD™ ULTRA.
ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 3 years of age. As with all electrical products,
precautions should be observed during the handling and use to prevent electrical shock.
FOR INDOOR, DRY-LOCATION USE ONLY
Get started in 5 easy steps!
1. POWER UP and turn on your LeapPad Ultra with the included
wall charger.*
2. SET UP your device by following the on-screen prompts to
connect to Wi-Fi.**
3. REGISTER your device by creating a LeapFrog Parent Account.
4. DOWNLOAD your included learning games.
5. PLAY & LEARN! Your child is now ready to play your
LeapPad Ultra.***
*Registration and device set-up can continue while charging—
charging may take up to 7 hours.
**If Wi-Fi is not available at time of device set-up, you can complete
set-up using the included USB cable and by installing the LeapFrog
Connect Application on your computer. Go to leapfrog.com/connect
to download.
***Full device set-up may take approximately 20 minutes or longer
depending on your Wi-Fi connection speed.
Get your included learning apps when
you complete device set-up!
Visit leapfrog.com/support for additional tips
and FAQs.
Parent Settings
Parent Settings allows you to control your child’s play on these interactive
LEAPPAD™ ULTRA features:
• Wireless settings — Control connection set-up and access to LeapFrog-defined
online experiences.
• Child profile — Easily manage permissions and profile information or add a new profile.
• Peer-to-peer settings — Control how your child plays with other children through their
pet avatars when two LeapPad Ultra devices are in close proximity to one another via
local ad hoc Wi-Fi network.
• App Center /Centre — Parents can purchase digital content directly from the device
with a Parent Account password. Control your child’s access to the App Center/Centre,
where they can watch trailers and create a wish list. Parents can choose whether
children may view pricing and buy buttons.
• Manage Content — Choose what content you want to store on and off the device.
•
Artwork Storage — Store child-created pictures, photos and video on and off the device.
• Device Settings — Manage settings like language, time, date and more.
Access to Parent Settings is protected by a 4-digit parent lock code that must be estab-
lished during initial set-up. Parent Settings can be accessed from the Sign In screen by
pressing the Parent Settings icon to login with your parent lock. Alternatively, you can log
in via the Settings icon on the Home Bar of the child’s Home Screen.
Forgetting or resetting your Parent Lock
If you have forgotten your 4-digit parent lock code you can look it up in the leapfrog.com
Parent Account you created during device set-up and registration. If you need to reset your par-
ent lock, you can do it from the device or reference the FAQ section for more information.
Operating Instructions
Wi-Fi connection support. If you experience any difficulty with Wi-Fi connectivity,
troubleshooting suggestions are available online at www.leapfrog.com/support
For indoor, dry-location use only. Do not use the product near a sink or other wet
locations. Take care not to spill food or any kind of liquid on this product as it may render
it inoperable and not serviceable. In case the unit does get wet, unplug all cables and turn
it OFF. Allow to dry thoroughly before reusing. Do not attempt to dry with a hair dryer or
other heat source. Do not re-connect to the AC outlet if wet or damaged.
Avoid prolonged exposure to extreme temperatures and direct sunlight. Operate in
places with temperatures ranging from 5°C (40°F) and 38°C (100°F). Do not leave the
product in your car as the temperatures in parked cars can exceed the acceptable storage
temperature. Exposure to extreme temperatures can result in shortened battery life or
cause the product to temporarily stop working.
Handle with care. To avoid injury, damage to this product or other property, avoid
dropping and never disassemble, crush, puncture, microwave, incinerate, insert foreign
objects or paint the product. Clean your hands before handling the product if they have
been exposed to suntan lotions or other chemicals.
Cleaning. Disconnect all cords before cleaning. Clean the product with a slightly damp
cloth (cold water). Do not use soap, detergent or other chemicals. Never submerge the
unit in water. Allow to dry thoroughly before re-use.
Do not connect to the AC wall outlet if wet or damaged.
Instructions Operationnelles
Connexion Wi-fi. Si vous avez des difficultés à vous connecter à votre connexion Wi-fi,
des aides sont disponibles en ligne à www.LeapFrog.com/support
A utiliser uniquement en intérieur, dans un endroit sec. Ne pas utiliser le produit près
d’un lavabo ou autres sources d’eau. Faites attention à ne pas renverser de nourriture
ou tout autre sorte de liquide sur ce produit car cela pourrait le rendre in opérationnel
et inutilisable. Si vous renversez du liquide sur le produit, débranchez tous les câbles et
éteignez-le. Laissez le produit sécher complètement avant de le réutiliser. N’essayez pas
de le sécher avec un sèche-cheveux ou tout autre source de chaleur. Ne pas rebrancher le
produit à l’adaptateur si celui- ci est humide ou abimé.
Évitez d’exposer le produit à des températures extrêmes ou aux rayons du soleil.
Utilisez le produit quand la température se trouve entre 5ºC (40ºF) et 38ºC (100ºF).
Ne pas laisser le produit dans votre voiture car les voitures garées peuvent excéder les
températures pour assurer le bon fonctionnement de votre produit. Exposer ce produit
à des températures extrêmes peut diminuer la durée de vie des piles ou peut entrainer
l’arrêt de votre produit.
A utiliser soigneusement. Pour éviter toutes blessures, dommages ou autres, évitez de
le faire tomber et ne jamais le démonter, casser, trouer, mettre aux micro-ondes, bruler,
incérer un objet ou peindre le produit. Lavez vos mains avant de manipuler le produit si
celles-ci ont été en contact avec de la crème solaire ou autres produits chimiques.
Pour nettoyer. Débranchez le produit de tous ces câbles. Nettoyez le produit avec un
chiffon légèrement humide (eau froide). N’utilisez pas de savon, de lessive ou autres
produits chimiques. Ne jamais immerger le produit dans l’eau.
Ne pas brancher à une prise si le produit est humide ou endommagé.
Important Safety Instructions:
Please read all the Important Safety Instructions prior to using LEAPPAD™ ULTRA.
Failure to follow these safety instructions could result in fire, electric shock, or other injury
or damage to LEAPPAD ULTRA or other property.
ACCESSORIES: Please read all safety instructions for any accessories or other products
before using with LEAPPAD ULTRA. LeapFrog is not responsible for the operation of third-
party accessories or their compliance with safety and regulatory standards.
CAUTION: Routinely check this toy for proper and safe condition. If there is any dam-
age or broken parts, remove toy from use.
WARNING: The AC Adapter or USB cords could be a strangulation hazard. Not for
children under 3 years.
CAUTION: If for any reason the screen (display) is fractured or cracked, immediately
remove this product from use.
PROTECT YOUR HEARING: Long-term exposure to loud sounds, at high volume,
may result in permanent hearing loss. When using headphones or ear buds, it is recom-
mended that the product is listened to at lower volumes for shorter periods of time. Set
the volume while in a quiet environment; turn the volume down if you cannot hear people
speaking near you. Limit the listening time to 90 minutes, followed by a quiet period. The
louder the volume, the less time required before your hearing may be affected. If you ex-
perience ringing in your ears or hear muffled speech, stop listening and have your hearing
checked.
WARNING: It is rare but possible for seizures to be triggered by light flashes or pat-
terns. Play/watch in a well-lit room and take 10 to 15 minute breaks every hour.
Battery Replacement
WARNING: The lithium rechargeable battery cannot be removed from the product.
For your safety, never try to remove the battery. For power or battery issues, please contact
LeapFrog customer support. Contact information for your local support is available at www.
leapfrog.com/support
Battery Charging
LEAPPAD ULTRA is equipped with a rechargeable lithium-polymer battery. It will require
about 4 hours of charging using the included AC power adapter prior to use. Attempting to
charge via connection to the computer will take much longer.
CAUTION: The battery is only to be charged by adults or children 8+ years of age un-
der the full supervision of parents. You can charge the battery by using either the included
AC power adapter or connecting the provided USB cord to your computer. We recommend
using the provided AC power adapter.
Battery Charging in Progress Indication
When the battery is charging, the charge indicator LED will be yellow. When fully charged,
it will turn green. It will be OFF if not connected via USB or if not charging.
Repairing or Modifying LeapPad Ultra
Never attempt to repair or modify as LEAPPAD™ ULTRA does not contain any user-
serviceable parts. Service should only be provided by LeapFrog Enterprises, Inc.
If the product has been in contact with liquids, punctured, or subjected to a severe impact
or fall, immediately remove this product from use and contact LeapFrog Consumer Ser-
vices for replacement if under warranty.
For service information, go to: www.leapfrog.com/support
AC Adapter Safety
CAUTION: Use only the AC adapter provided with the product.
WARNING: Not suitable for children under 36 months. Misuse of transformer (AC
Adapter) can cause electric shock.
(Note: The word “transformer” is sometimes substituted for the word “adapter”. Use only
the included AC power adapter.
• Connection of the transformer to the wall outlet should be performed only by an adult
or child 8+ years of age.
• The transformer is not intended to be used as a toy, and the use of the transformer shall
be under the full supervision of parents.
• As with all electrical products, precautions should be observed during handling and use
to prevent electrical shock.
• The power adapter may become warm during normal use. Always allow adequate
ventilation and use care when handling the power adapter.
• Do not connect or disconnect with wet hands.
• The transformer should be periodically examined for conditions that may result in
the risk of fire, electrical shock or injury to persons, such as damage to the cord, plug,
blades, housing or other parts, and in the event of such conditions, the transformer
must not be used until the damage is repaired. The cord of this transformer cannot be
replaced; if the cord is damaged, dispose of the transformer in accordance with your
local electrical product recycling regulations.
Unplug the AC Adapter (transformer) if any of the following conditions exist:
• The power cord or plug, or the USB cord has become frayed or damaged.
• The power adapter is exposed to rain, liquid, or excessive moisture.
• The power adapter enclosure has become damaged.
• You suspect the power adapter needs service or repair.
To Clean AC Adapter, disconnect it from the wall and clean with a cloth dampened with
water. Do not immerse in water or use soap or other chemicals. Allow to dry before
reusing. Do not connect to the AC outlet if wet or damaged.
• This AC adapter can be used to recharge the single cell Li-Poly battery of the LeapFrog®
LEAPPAD ULTRA device (3.7Vdc, 4000mAh).
WARNING: DO NOT recharge non-rechargeable batteries.
For Europe - The toy must be used with a transformer for toys.
AC Adapter Electrical Ratings: Input: ~ 120VAC, 60Hz (for US); ~ 230VAC, 50Hz (for UK
or EU); ~ 240VAC, 50Hz (for AS/NZL) Output: DC5V, 1.5A, 7.5VA
Informations Importantes de sécurité :
Veuillez lire toutes les informations importantes de sécurité avant d’utiliser le LEAPPAD™ ULTRA.
Ne pas appliquer ces consignes peut engendrer des risques d’incendie, d’électrocutions, autres
blessures ou dommages au LEAPPAD ULTRA ou autres.
ACCESSOIRES : Lisez les instructions pour les accessoires ou tout autre produit avant de
les utiliser avec le LEAPPAD ULTRA. LeapFrog n’est pas responsable pour les accessoires
vendus par d’autres fabricants et leurs standards de sécurité.
ATTENTION : Vérifiez régulièrement que ce jouet est en bon état et qu’il ne présen-
te pas de danger. Dans le cas contraire (par exemple, s’il est cassé à certains endroits),
tenez ce jouet hors de portée des enfants.
ATTENTION : L’adaptateur AC ou le câble USB peuvent provoquer un risque
d’étranglement. Ne convient pas aux enfants de moins de 3 ans.
ATTENTION : Si pour quelque raison que ce soit, l’écran (d’affichage) est brisé ou
fendu, mettez immédiatement ce produit hors de portée des enfants.
PROTÉGEZ VOTRE OUÏE : Une exposition durable à des sonorités trop fortes peut
entraîner une perte définitive de l’ouïe. Lorsque vous utilisez le casque ou les écou-
teurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez
le son lorsque vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les
personnes qui parlent autour de vous. Limitez le temps d’écoute à 90 minutes, puis
accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de chances
que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou
si vous entendez des voix sourdes, arrêtez immédiatement d’écouter ce produit et faites
contrôler votre ouïe dans les plus brefs délais.
ATTENTION : Il est rare mais possible que les lumières clignotantes ou les formes
provoquent des crises d’épilepsies. Jouez/regardez dans une pièce bien éclairée et prenez
des poses de 10 à 15 minutes toutes les heures.
Replacement des piles
ATTENTION : La pile rechargeable lithium ne peut être retirée de ce produit. Pour
votre sécurité, n’essayez jamais de retirer la pile. Si vous avez des problèmes concernant
la pile ou la batterie de votre produit, veuillez contacter le service client LeapFrog. Les
coordonnées sont disponibles à www.leapfrog.com/support
Recharger les piles
Le LEAPPAD ULTRA est équipé d’une pile lithium-polymère. Branchez-le avec l’adaptateur
AC pendant 4 heures avant de l’utiliser. Le recharger avec un ordinateur prendra plus de
temps.
ATTENTION : L’adaptateur et le cordon USB peuvent constituer un risque
d’étranglement. Ils ne doivent pas être utilisé par les enfants de moins de 3 ans. AT-
TENTION : Ne convient pas aux enfants de moins de 36 mois. L’utilisation inadaptée de
l’adaptateur peut causer une électrocution.
ATTENTION : La pile ne doit être chargée que par un adulte ou enfants de plus de
8 ans sous la supervision d’un parent exclusivement. Vous pouvez recharger la pile en
utilisant l’adaptateur AC ou en connectant le produit à votre ordinateur avec le câble USB
fournis. Nous recommandons l’utilisation de ceux inclus.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference. Ce guide
contient des informations importantes. Veuillez le conserver pour toute référence future.
USB Connector/
Charger
Power
Button
Volume Buttons
D-Pad
Cartridge Slot
Home Button
Camera/
Video
Recorder
Camera/
Video
Recorder
Charging
Light
Stylus Stylus Tether Points
Headphone Jack
Microphone
Speaker
™
Get Started and Download
Your Included Learning Apps
Read all the Operating & Important Safety Instructions before using LEAPPAD™ ULTRA.
ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 3 years of age. As with all electrical products,
precautions should be observed during the handling and use to prevent electrical shock.
FOR INDOOR, DRY-LOCATION USE ONLY
Get started in 5 easy steps!
1. POWER UP and turn on your LeapPad Ultra with the included
wall charger.*
2. SET UP your device by following the on-screen prompts to
connect to Wi-Fi.**
3. REGISTER your device by creating a LeapFrog Parent Account.
4. DOWNLOAD your included learning games.
5. PLAY & LEARN! Your child is now ready to play your
LeapPad Ultra.***
*Registration and device set-up can continue while charging—
charging may take up to 7 hours.
**If Wi-Fi is not available at time of device set-up, you can complete
set-up using the included USB cable and by installing the LeapFrog
Connect Application on your computer. Go to leapfrog.com/connect
to download.
***Full device set-up may take approximately 20 minutes or longer
depending on your Wi-Fi connection speed.
Get your included learning apps when
you complete device set-up!
Visit leapfrog.com/support for additional tips
and FAQs.
Parent Settings
Parent Settings allows you to control your child’s play on these interactive
LEAPPAD™ ULTRA features:
• Wireless settings — Control connection set-up and access to LeapFrog-defined
online experiences.
• Child profile — Easily manage permissions and profile information or add a new profile.
• Peer-to-peer settings — Control how your child plays with other children through their
pet avatars when two LeapPad Ultra devices are in close proximity to one another via
local ad hoc Wi-Fi network.
• App Center /Centre — Parents can purchase digital content directly from the device
with a Parent Account password. Control your child’s access to the App Center/Centre,
where they can watch trailers and create a wish list. Parents can choose whether
children may view pricing and buy buttons.
• Manage Content — Choose what content you want to store on and off the device.
•
Artwork Storage — Store child-created pictures, photos and video on and off the device.
• Device Settings — Manage settings like language, time, date and more.
Access to Parent Settings is protected by a 4-digit parent lock code that must be estab-
lished during initial set-up. Parent Settings can be accessed from the Sign In screen by
pressing the Parent Settings icon to login with your parent lock. Alternatively, you can log
in via the Settings icon on the Home Bar of the child’s Home Screen.
Forgetting or resetting your Parent Lock
If you have forgotten your 4-digit parent lock code you can look it up in the leapfrog.com
Parent Account you created during device set-up and registration. If you need to reset your par-
ent lock, you can do it from the device or reference the FAQ section for more information.
Operating Instructions
Wi-Fi connection support. If you experience any difficulty with Wi-Fi connectivity,
troubleshooting suggestions are available online at www.leapfrog.com/support
For indoor, dry-location use only. Do not use the product near a sink or other wet
locations. Take care not to spill food or any kind of liquid on this product as it may render
it inoperable and not serviceable. In case the unit does get wet, unplug all cables and turn
it OFF. Allow to dry thoroughly before reusing. Do not attempt to dry with a hair dryer or
other heat source. Do not re-connect to the AC outlet if wet or damaged.
Avoid prolonged exposure to extreme temperatures and direct sunlight. Operate in
places with temperatures ranging from 5°C (40°F) and 38°C (100°F). Do not leave the
product in your car as the temperatures in parked cars can exceed the acceptable storage
temperature. Exposure to extreme temperatures can result in shortened battery life or
cause the product to temporarily stop working.
Handle with care. To avoid injury, damage to this product or other property, avoid
dropping and never disassemble, crush, puncture, microwave, incinerate, insert foreign
objects or paint the product. Clean your hands before handling the product if they have
been exposed to suntan lotions or other chemicals.
Cleaning. Disconnect all cords before cleaning. Clean the product with a slightly damp
cloth (cold water). Do not use soap, detergent or other chemicals. Never submerge the
unit in water. Allow to dry thoroughly before re-use.
Do not connect to the AC wall outlet if wet or damaged.
Instructions Operationnelles
Connexion Wi-fi. Si vous avez des difficultés à vous connecter à votre connexion Wi-fi,
des aides sont disponibles en ligne à www.LeapFrog.com/support
A utiliser uniquement en intérieur, dans un endroit sec. Ne pas utiliser le produit près
d’un lavabo ou autres sources d’eau. Faites attention à ne pas renverser de nourriture
ou tout autre sorte de liquide sur ce produit car cela pourrait le rendre in opérationnel
et inutilisable. Si vous renversez du liquide sur le produit, débranchez tous les câbles et
éteignez-le. Laissez le produit sécher complètement avant de le réutiliser. N’essayez pas
de le sécher avec un sèche-cheveux ou tout autre source de chaleur. Ne pas rebrancher le
produit à l’adaptateur si celui- ci est humide ou abimé.
Évitez d’exposer le produit à des températures extrêmes ou aux rayons du soleil.
Utilisez le produit quand la température se trouve entre 5ºC (40ºF) et 38ºC (100ºF).
Ne pas laisser le produit dans votre voiture car les voitures garées peuvent excéder les
températures pour assurer le bon fonctionnement de votre produit. Exposer ce produit
à des températures extrêmes peut diminuer la durée de vie des piles ou peut entrainer
l’arrêt de votre produit.
A utiliser soigneusement. Pour éviter toutes blessures, dommages ou autres, évitez de
le faire tomber et ne jamais le démonter, casser, trouer, mettre aux micro-ondes, bruler,
incérer un objet ou peindre le produit. Lavez vos mains avant de manipuler le produit si
celles-ci ont été en contact avec de la crème solaire ou autres produits chimiques.
Pour nettoyer. Débranchez le produit de tous ces câbles. Nettoyez le produit avec un
chiffon légèrement humide (eau froide). N’utilisez pas de savon, de lessive ou autres
produits chimiques. Ne jamais immerger le produit dans l’eau.
Ne pas brancher à une prise si le produit est humide ou endommagé.
Important Safety Instructions:
Please read all the Important Safety Instructions prior to using LEAPPAD™ ULTRA.
Failure to follow these safety instructions could result in fire, electric shock, or other injury
or damage to LEAPPAD ULTRA or other property.
ACCESSORIES: Please read all safety instructions for any accessories or other products
before using with LEAPPAD ULTRA. LeapFrog is not responsible for the operation of third-
party accessories or their compliance with safety and regulatory standards.
CAUTION: Routinely check this toy for proper and safe condition. If there is any dam-
age or broken parts, remove toy from use.
WARNING: The AC Adapter or USB cords could be a strangulation hazard. Not for
children under 3 years.
CAUTION: If for any reason the screen (display) is fractured or cracked, immediately
remove this product from use.
PROTECT YOUR HEARING: Long-term exposure to loud sounds, at high volume,
may result in permanent hearing loss. When using headphones or ear buds, it is recom-
mended that the product is listened to at lower volumes for shorter periods of time. Set
the volume while in a quiet environment; turn the volume down if you cannot hear people
speaking near you. Limit the listening time to 90 minutes, followed by a quiet period. The
louder the volume, the less time required before your hearing may be affected. If you ex-
perience ringing in your ears or hear muffled speech, stop listening and have your hearing
checked.
WARNING: It is rare but possible for seizures to be triggered by light flashes or pat-
terns. Play/watch in a well-lit room and take 10 to 15 minute breaks every hour.
Battery Replacement
WARNING: The lithium rechargeable battery cannot be removed from the product.
For your safety, never try to remove the battery. For power or battery issues, please contact
LeapFrog customer support. Contact information for your local support is available at www.
leapfrog.com/support
Battery Charging
LEAPPAD ULTRA is equipped with a rechargeable lithium-polymer battery. It will require
about 4 hours of charging using the included AC power adapter prior to use. Attempting to
charge via connection to the computer will take much longer.
CAUTION: The battery is only to be charged by adults or children 8+ years of age un-
der the full supervision of parents. You can charge the battery by using either the included
AC power adapter or connecting the provided USB cord to your computer. We recommend
using the provided AC power adapter.
Battery Charging in Progress Indication
When the battery is charging, the charge indicator LED will be yellow. When fully charged,
it will turn green. It will be OFF if not connected via USB or if not charging.
Repairing or Modifying LeapPad Ultra
Never attempt to repair or modify as LEAPPAD™ ULTRA does not contain any user-
serviceable parts. Service should only be provided by LeapFrog Enterprises, Inc.
If the product has been in contact with liquids, punctured, or subjected to a severe impact
or fall, immediately remove this product from use and contact LeapFrog Consumer Ser-
vices for replacement if under warranty.
For service information, go to: www.leapfrog.com/support
AC Adapter Safety
CAUTION: Use only the AC adapter provided with the product.
WARNING: Not suitable for children under 36 months. Misuse of transformer (AC
Adapter) can cause electric shock.
(Note: The word “transformer” is sometimes substituted for the word “adapter”. Use only
the included AC power adapter.
• Connection of the transformer to the wall outlet should be performed only by an adult
or child 8+ years of age.
• The transformer is not intended to be used as a toy, and the use of the transformer shall
be under the full supervision of parents.
• As with all electrical products, precautions should be observed during handling and use
to prevent electrical shock.
• The power adapter may become warm during normal use. Always allow adequate
ventilation and use care when handling the power adapter.
• Do not connect or disconnect with wet hands.
• The transformer should be periodically examined for conditions that may result in
the risk of fire, electrical shock or injury to persons, such as damage to the cord, plug,
blades, housing or other parts, and in the event of such conditions, the transformer
must not be used until the damage is repaired. The cord of this transformer cannot be
replaced; if the cord is damaged, dispose of the transformer in accordance with your
local electrical product recycling regulations.
Unplug the AC Adapter (transformer) if any of the following conditions exist:
• The power cord or plug, or the USB cord has become frayed or damaged.
• The power adapter is exposed to rain, liquid, or excessive moisture.
• The power adapter enclosure has become damaged.
• You suspect the power adapter needs service or repair.
To Clean AC Adapter, disconnect it from the wall and clean with a cloth dampened with
water. Do not immerse in water or use soap or other chemicals. Allow to dry before
reusing. Do not connect to the AC outlet if wet or damaged.
• This AC adapter can be used to recharge the single cell Li-Poly battery of the LeapFrog®
LEAPPAD ULTRA device (3.7Vdc, 4000mAh).
WARNING: DO NOT recharge non-rechargeable batteries.
For Europe - The toy must be used with a transformer for toys.
AC Adapter Electrical Ratings: Input: ~ 120VAC, 60Hz (for US); ~ 230VAC, 50Hz (for UK
or EU); ~ 240VAC, 50Hz (for AS/NZL) Output: DC5V, 1.5A, 7.5VA
Informations Importantes de sécurité :
Veuillez lire toutes les informations importantes de sécurité avant d’utiliser le LEAPPAD™ ULTRA.
Ne pas appliquer ces consignes peut engendrer des risques d’incendie, d’électrocutions, autres
blessures ou dommages au LEAPPAD ULTRA ou autres.
ACCESSOIRES : Lisez les instructions pour les accessoires ou tout autre produit avant de
les utiliser avec le LEAPPAD ULTRA. LeapFrog n’est pas responsable pour les accessoires
vendus par d’autres fabricants et leurs standards de sécurité.
ATTENTION : Vérifiez régulièrement que ce jouet est en bon état et qu’il ne présen-
te pas de danger. Dans le cas contraire (par exemple, s’il est cassé à certains endroits),
tenez ce jouet hors de portée des enfants.
ATTENTION : L’adaptateur AC ou le câble USB peuvent provoquer un risque
d’étranglement. Ne convient pas aux enfants de moins de 3 ans.
ATTENTION : Si pour quelque raison que ce soit, l’écran (d’affichage) est brisé ou
fendu, mettez immédiatement ce produit hors de portée des enfants.
PROTÉGEZ VOTRE OUÏE : Une exposition durable à des sonorités trop fortes peut
entraîner une perte définitive de l’ouïe. Lorsque vous utilisez le casque ou les écou-
teurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez
le son lorsque vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les
personnes qui parlent autour de vous. Limitez le temps d’écoute à 90 minutes, puis
accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de chances
que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou
si vous entendez des voix sourdes, arrêtez immédiatement d’écouter ce produit et faites
contrôler votre ouïe dans les plus brefs délais.
ATTENTION : Il est rare mais possible que les lumières clignotantes ou les formes
provoquent des crises d’épilepsies. Jouez/regardez dans une pièce bien éclairée et prenez
des poses de 10 à 15 minutes toutes les heures.
Replacement des piles
ATTENTION : La pile rechargeable lithium ne peut être retirée de ce produit. Pour
votre sécurité, n’essayez jamais de retirer la pile. Si vous avez des problèmes concernant
la pile ou la batterie de votre produit, veuillez contacter le service client LeapFrog. Les
coordonnées sont disponibles à www.leapfrog.com/support
Recharger les piles
Le LEAPPAD ULTRA est équipé d’une pile lithium-polymère. Branchez-le avec l’adaptateur
AC pendant 4 heures avant de l’utiliser. Le recharger avec un ordinateur prendra plus de
temps.
ATTENTION : L’adaptateur et le cordon USB peuvent constituer un risque
d’étranglement. Ils ne doivent pas être utilisé par les enfants de moins de 3 ans. AT-
TENTION : Ne convient pas aux enfants de moins de 36 mois. L’utilisation inadaptée de
l’adaptateur peut causer une électrocution.
ATTENTION : La pile ne doit être chargée que par un adulte ou enfants de plus de
8 ans sous la supervision d’un parent exclusivement. Vous pouvez recharger la pile en
utilisant l’adaptateur AC ou en connectant le produit à votre ordinateur avec le câble USB
fournis. Nous recommandons l’utilisation de ceux inclus.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference. Ce guide
contient des informations importantes. Veuillez le conserver pour toute référence future.
USB Connector/
Charger
Power
Button
Volume Buttons
D-Pad
Cartridge Slot
Home Button
Camera/
Video
Recorder
Camera/
Video
Recorder
Charging
Light
Stylus Stylus Tether Points
Headphone Jack
Microphone
Speaker
™
Get Started and Download
Your Included Learning Apps
Read all the Operating & Important Safety Instructions before using LEAPPAD™ ULTRA.
ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 3 years of age. As with all electrical products,
precautions should be observed during the handling and use to prevent electrical shock.
FOR INDOOR, DRY-LOCATION USE ONLY
Get started in 5 easy steps!
1. POWER UP and turn on your LeapPad Ultra with the included
wall charger.*
2. SET UP your device by following the on-screen prompts to
connect to Wi-Fi.**
3. REGISTER your device by creating a LeapFrog Parent Account.
4. DOWNLOAD your included learning games.
5. PLAY & LEARN! Your child is now ready to play your
LeapPad Ultra.***
*Registration and device set-up can continue while charging—
charging may take up to 7 hours.
**If Wi-Fi is not available at time of device set-up, you can complete
set-up using the included USB cable and by installing the LeapFrog
Connect Application on your computer. Go to leapfrog.com/connect
to download.
***Full device set-up may take approximately 20 minutes or longer
depending on your Wi-Fi connection speed.
Get your included learning apps when
you complete device set-up!
Visit leapfrog.com/support for additional tips
and FAQs.
Parent Settings
Parent Settings allows you to control your child’s play on these interactive
LEAPPAD™ ULTRA features:
• Wireless settings — Control connection set-up and access to LeapFrog-defined
online experiences.
• Child profile — Easily manage permissions and profile information or add a new profile.
• Peer-to-peer settings — Control how your child plays with other children through their
pet avatars when two LeapPad Ultra devices are in close proximity to one another via
local ad hoc Wi-Fi network.
• App Center /Centre — Parents can purchase digital content directly from the device
with a Parent Account password. Control your child’s access to the App Center/Centre,
where they can watch trailers and create a wish list. Parents can choose whether
children may view pricing and buy buttons.
• Manage Content — Choose what content you want to store on and off the device.
•
Artwork Storage — Store child-created pictures, photos and video on and off the device.
• Device Settings — Manage settings like language, time, date and more.
Access to Parent Settings is protected by a 4-digit parent lock code that must be estab-
lished during initial set-up. Parent Settings can be accessed from the Sign In screen by
pressing the Parent Settings icon to login with your parent lock. Alternatively, you can log
in via the Settings icon on the Home Bar of the child’s Home Screen.
Forgetting or resetting your Parent Lock
If you have forgotten your 4-digit parent lock code you can look it up in the leapfrog.com
Parent Account you created during device set-up and registration. If you need to reset your par-
ent lock, you can do it from the device or reference the FAQ section for more information.
Operating Instructions
Wi-Fi connection support. If you experience any difficulty with Wi-Fi connectivity,
troubleshooting suggestions are available online at www.leapfrog.com/support
For indoor, dry-location use only. Do not use the product near a sink or other wet
locations. Take care not to spill food or any kind of liquid on this product as it may render
it inoperable and not serviceable. In case the unit does get wet, unplug all cables and turn
it OFF. Allow to dry thoroughly before reusing. Do not attempt to dry with a hair dryer or
other heat source. Do not re-connect to the AC outlet if wet or damaged.
Avoid prolonged exposure to extreme temperatures and direct sunlight. Operate in
places with temperatures ranging from 5°C (40°F) and 38°C (100°F). Do not leave the
product in your car as the temperatures in parked cars can exceed the acceptable storage
temperature. Exposure to extreme temperatures can result in shortened battery life or
cause the product to temporarily stop working.
Handle with care. To avoid injury, damage to this product or other property, avoid
dropping and never disassemble, crush, puncture, microwave, incinerate, insert foreign
objects or paint the product. Clean your hands before handling the product if they have
been exposed to suntan lotions or other chemicals.
Cleaning. Disconnect all cords before cleaning. Clean the product with a slightly damp
cloth (cold water). Do not use soap, detergent or other chemicals. Never submerge the
unit in water. Allow to dry thoroughly before re-use.
Do not connect to the AC wall outlet if wet or damaged.
Instructions Operationnelles
Connexion Wi-fi. Si vous avez des difficultés à vous connecter à votre connexion Wi-fi,
des aides sont disponibles en ligne à www.LeapFrog.com/support
A utiliser uniquement en intérieur, dans un endroit sec. Ne pas utiliser le produit près
d’un lavabo ou autres sources d’eau. Faites attention à ne pas renverser de nourriture
ou tout autre sorte de liquide sur ce produit car cela pourrait le rendre in opérationnel
et inutilisable. Si vous renversez du liquide sur le produit, débranchez tous les câbles et
éteignez-le. Laissez le produit sécher complètement avant de le réutiliser. N’essayez pas
de le sécher avec un sèche-cheveux ou tout autre source de chaleur. Ne pas rebrancher le
produit à l’adaptateur si celui- ci est humide ou abimé.
Évitez d’exposer le produit à des températures extrêmes ou aux rayons du soleil.
Utilisez le produit quand la température se trouve entre 5ºC (40ºF) et 38ºC (100ºF).
Ne pas laisser le produit dans votre voiture car les voitures garées peuvent excéder les
températures pour assurer le bon fonctionnement de votre produit. Exposer ce produit
à des températures extrêmes peut diminuer la durée de vie des piles ou peut entrainer
l’arrêt de votre produit.
A utiliser soigneusement. Pour éviter toutes blessures, dommages ou autres, évitez de
le faire tomber et ne jamais le démonter, casser, trouer, mettre aux micro-ondes, bruler,
incérer un objet ou peindre le produit. Lavez vos mains avant de manipuler le produit si
celles-ci ont été en contact avec de la crème solaire ou autres produits chimiques.
Pour nettoyer. Débranchez le produit de tous ces câbles. Nettoyez le produit avec un
chiffon légèrement humide (eau froide). N’utilisez pas de savon, de lessive ou autres
produits chimiques. Ne jamais immerger le produit dans l’eau.
Ne pas brancher à une prise si le produit est humide ou endommagé.
Important Safety Instructions:
Please read all the Important Safety Instructions prior to using LEAPPAD™ ULTRA.
Failure to follow these safety instructions could result in fire, electric shock, or other injury
or damage to LEAPPAD ULTRA or other property.
ACCESSORIES: Please read all safety instructions for any accessories or other products
before using with LEAPPAD ULTRA. LeapFrog is not responsible for the operation of third-
party accessories or their compliance with safety and regulatory standards.
CAUTION: Routinely check this toy for proper and safe condition. If there is any dam-
age or broken parts, remove toy from use.
WARNING: The AC Adapter or USB cords could be a strangulation hazard. Not for
children under 3 years.
CAUTION: If for any reason the screen (display) is fractured or cracked, immediately
remove this product from use.
PROTECT YOUR HEARING: Long-term exposure to loud sounds, at high volume,
may result in permanent hearing loss. When using headphones or ear buds, it is recom-
mended that the product is listened to at lower volumes for shorter periods of time. Set
the volume while in a quiet environment; turn the volume down if you cannot hear people
speaking near you. Limit the listening time to 90 minutes, followed by a quiet period. The
louder the volume, the less time required before your hearing may be affected. If you ex-
perience ringing in your ears or hear muffled speech, stop listening and have your hearing
checked.
WARNING: It is rare but possible for seizures to be triggered by light flashes or pat-
terns. Play/watch in a well-lit room and take 10 to 15 minute breaks every hour.
Battery Replacement
WARNING: The lithium rechargeable battery cannot be removed from the product.
For your safety, never try to remove the battery. For power or battery issues, please contact
LeapFrog customer support. Contact information for your local support is available at www.
leapfrog.com/support
Battery Charging
LEAPPAD ULTRA is equipped with a rechargeable lithium-polymer battery. It will require
about 4 hours of charging using the included AC power adapter prior to use. Attempting to
charge via connection to the computer will take much longer.
CAUTION: The battery is only to be charged by adults or children 8+ years of age un-
der the full supervision of parents. You can charge the battery by using either the included
AC power adapter or connecting the provided USB cord to your computer. We recommend
using the provided AC power adapter.
Battery Charging in Progress Indication
When the battery is charging, the charge indicator LED will be yellow. When fully charged,
it will turn green. It will be OFF if not connected via USB or if not charging.
Repairing or Modifying LeapPad Ultra
Never attempt to repair or modify as LEAPPAD™ ULTRA does not contain any user-
serviceable parts. Service should only be provided by LeapFrog Enterprises, Inc.
If the product has been in contact with liquids, punctured, or subjected to a severe impact
or fall, immediately remove this product from use and contact LeapFrog Consumer Ser-
vices for replacement if under warranty.
For service information, go to: www.leapfrog.com/support
AC Adapter Safety
CAUTION: Use only the AC adapter provided with the product.
WARNING: Not suitable for children under 36 months. Misuse of transformer (AC
Adapter) can cause electric shock.
(Note: The word “transformer” is sometimes substituted for the word “adapter”. Use only
the included AC power adapter.
• Connection of the transformer to the wall outlet should be performed only by an adult
or child 8+ years of age.
• The transformer is not intended to be used as a toy, and the use of the transformer shall
be under the full supervision of parents.
• As with all electrical products, precautions should be observed during handling and use
to prevent electrical shock.
• The power adapter may become warm during normal use. Always allow adequate
ventilation and use care when handling the power adapter.
• Do not connect or disconnect with wet hands.
• The transformer should be periodically examined for conditions that may result in
the risk of fire, electrical shock or injury to persons, such as damage to the cord, plug,
blades, housing or other parts, and in the event of such conditions, the transformer
must not be used until the damage is repaired. The cord of this transformer cannot be
replaced; if the cord is damaged, dispose of the transformer in accordance with your
local electrical product recycling regulations.
Unplug the AC Adapter (transformer) if any of the following conditions exist:
• The power cord or plug, or the USB cord has become frayed or damaged.
• The power adapter is exposed to rain, liquid, or excessive moisture.
• The power adapter enclosure has become damaged.
• You suspect the power adapter needs service or repair.
To Clean AC Adapter, disconnect it from the wall and clean with a cloth dampened with
water. Do not immerse in water or use soap or other chemicals. Allow to dry before
reusing. Do not connect to the AC outlet if wet or damaged.
• This AC adapter can be used to recharge the single cell Li-Poly battery of the LeapFrog®
LEAPPAD ULTRA device (3.7Vdc, 4000mAh).
WARNING: DO NOT recharge non-rechargeable batteries.
For Europe - The toy must be used with a transformer for toys.
AC Adapter Electrical Ratings: Input: ~ 120VAC, 60Hz (for US); ~ 230VAC, 50Hz (for UK
or EU); ~ 240VAC, 50Hz (for AS/NZL) Output:
DC5V, 1.5A, 7.5VA
Informations Importantes de sécurité :
Veuillez lire toutes les informations importantes de sécurité avant d’utiliser le LEAPPAD™ ULTRA.
Ne pas appliquer ces consignes peut engendrer des risques d’incendie, d’électrocutions, autres
blessures ou dommages au LEAPPAD ULTRA ou autres.
ACCESSOIRES : Lisez les instructions pour les accessoires ou tout autre produit avant de
les utiliser avec le LEAPPAD ULTRA. LeapFrog n’est pas responsable pour les accessoires
vendus par d’autres fabricants et leurs standards de sécurité.
ATTENTION : Vérifiez régulièrement que ce jouet est en bon état et qu’il ne présen-
te pas de danger. Dans le cas contraire (par exemple, s’il est cassé à certains endroits),
tenez ce jouet hors de portée des enfants.
ATTENTION : L’adaptateur AC ou le câble USB peuvent provoquer un risque
d’étranglement. Ne convient pas aux enfants de moins de 3 ans.
ATTENTION : Si pour quelque raison que ce soit, l’écran (d’affichage) est brisé ou
fendu, mettez immédiatement ce produit hors de portée des enfants.
PROTÉGEZ VOTRE OUÏE : Une exposition durable à des sonorités trop fortes peut
entraîner une perte définitive de l’ouïe. Lorsque vous utilisez le casque ou les écou-
teurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez
le son lorsque vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les
personnes qui parlent autour de vous. Limitez le temps d’écoute à 90 minutes, puis
accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de chances
que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou
si vous entendez des voix sourdes, arrêtez immédiatement d’écouter ce produit et faites
contrôler votre ouïe dans les plus brefs délais.
ATTENTION : Il est rare mais possible que les lumières clignotantes ou les formes
provoquent des crises d’épilepsies. Jouez/regardez dans une pièce bien éclairée et prenez
des poses de 10 à 15 minutes toutes les heures.
Replacement des piles
ATTENTION : La pile rechargeable lithium ne peut être retirée de ce produit. Pour
votre sécurité, n’essayez jamais de retirer la pile. Si vous avez des problèmes concernant
la pile ou la batterie de votre produit, veuillez contacter le service client LeapFrog. Les
coordonnées sont disponibles à www.leapfrog.com/support
Recharger les piles
Le LEAPPAD ULTRA est équipé d’une pile lithium-polymère. Branchez-le avec l’adaptateur
AC pendant 4 heures avant de l’utiliser. Le recharger avec un ordinateur prendra plus de
temps.
ATTENTION : L’adaptateur et le cordon USB peuvent constituer un risque
d’étranglement. Ils ne doivent pas être utilisé par les enfants de moins de 3 ans. AT-
TENTION : Ne convient pas aux enfants de moins de 36 mois. L’utilisation inadaptée de
l’adaptateur peut causer une électrocution.
ATTENTION : La pile ne doit être chargée que par un adulte ou enfants de plus de
8 ans sous la supervision d’un parent exclusivement. Vous pouvez recharger la pile en
utilisant l’adaptateur AC ou en connectant le produit à votre ordinateur avec le câble USB
fournis. Nous recommandons l’utilisation de ceux inclus.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference. Ce guide
contient des informations importantes. Veuillez le conserver pour toute référence future.
USB Connector/
Charger
Power
Button
Volume Buttons
D-Pad
Cartridge Slot
Home Button
Camera/
Video
Recorder
Camera/
Video
Recorder
Charging
Light
Stylus Stylus Tether Points
Headphone Jack
Microphone
Speaker
™
Get Started and Download
Your Included Learning Apps
Read all the Operating & Important Safety Instructions before using LEAPPAD™ ULTRA.
ELECTRICALLY OPERATED PRODUCT
Not recommended for children under 3 years of age. As with all electrical products,
precautions should be observed during the handling and use to prevent electrical shock.
FOR INDOOR, DRY-LOCATION USE ONLY
Get started in 5 easy steps!
1. POWER UP and turn on your LeapPad Ultra with the included
wall charger.*
2. SET UP your device by following the on-screen prompts to
connect to Wi-Fi.**
3. REGISTER your device by creating a LeapFrog Parent Account.
4. DOWNLOAD your included learning games.
5. PLAY & LEARN! Your child is now ready to play your
LeapPad Ultra.***
*Registration and device set-up can continue while charging—
charging may take up to 7 hours.
**If Wi-Fi is not available at time of device set-up, you can complete
set-up using the included USB cable and by installing the LeapFrog
Connect Application on your computer. Go to leapfrog.com/connect
to download.
***Full device set-up may take approximately 20 minutes or longer
depending on your Wi-Fi connection speed.
Get your included learning apps when
you complete device set-up!
Visit leapfrog.com/support for additional tips
and FAQs.
Parent Settings
Parent Settings allows you to control your child’s play on these interactive
LEAPPAD™ ULTRA features:
• Wireless settings — Control connection set-up and access to LeapFrog-defined
online experiences.
• Child profile — Easily manage permissions and profile information or add a new profile.
• Peer-to-peer settings — Control how your child plays with other children through their
pet avatars when two LeapPad Ultra devices are in close proximity to one another via
local ad hoc Wi-Fi network.
• App Center /Centre — Parents can purchase digital content directly from the device
with a Parent Account password. Control your child’s access to the App Center/Centre,
where they can watch trailers and create a wish list. Parents can choose whether
children may view pricing and buy buttons.
• Manage Content — Choose what content you want to store on and off the device.
•
Artwork Storage — Store child-created pictures, photos and video on and off the device.
• Device Settings — Manage settings like language, time, date and more.
Access to Parent Settings is protected by a 4-digit parent lock code that must be estab-
lished during initial set-up. Parent Settings can be accessed from the Sign In screen by
pressing the Parent Settings icon to login with your parent lock. Alternatively, you can log
in via the Settings icon on the Home Bar of the child’s Home Screen.
Forgetting or resetting your Parent Lock
If you have forgotten your 4-digit parent lock code you can look it up in the leapfrog.com
Parent Account you created during device set-up and registration. If you need to reset your par-
ent lock, you can do it from the device or reference the FAQ section for more information.
Operating Instructions
Wi-Fi connection support. If you experience any difficulty with Wi-Fi connectivity,
troubleshooting suggestions are available online at www.leapfrog.com/support
For indoor, dry-location use only. Do not use the product near a sink or other wet
locations. Take care not to spill food or any kind of liquid on this product as it may render
it inoperable and not serviceable. In case the unit does get wet, unplug all cables and turn
it OFF. Allow to dry thoroughly before reusing. Do not attempt to dry with a hair dryer or
other heat source. Do not re-connect to the AC outlet if wet or damaged.
Avoid prolonged exposure to extreme temperatures and direct sunlight. Operate in
places with temperatures ranging from 5°C (40°F) and 38°C (100°F). Do not leave the
product in your car as the temperatures in parked cars can exceed the acceptable storage
temperature. Exposure to extreme temperatures can result in shortened battery life or
cause the product to temporarily stop working.
Handle with care. To avoid injury, damage to this product or other property, avoid
dropping and never disassemble, crush, puncture, microwave, incinerate, insert foreign
objects or paint the product. Clean your hands before handling the product if they have
been exposed to suntan lotions or other chemicals.
Cleaning. Disconnect all cords before cleaning. Clean the product with a slightly damp
cloth (cold water). Do not use soap, detergent or other chemicals. Never submerge the
unit in water. Allow to dry thoroughly before re-use.
Do not connect to the AC wall outlet if wet or damaged.
Instructions Operationnelles
Connexion Wi-fi. Si vous avez des difficultés à vous connecter à votre connexion Wi-fi,
des aides sont disponibles en ligne à www.LeapFrog.com/support
A utiliser uniquement en intérieur, dans un endroit sec. Ne pas utiliser le produit près
d’un lavabo ou autres sources d’eau. Faites attention à ne pas renverser de nourriture
ou tout autre sorte de liquide sur ce produit car cela pourrait le rendre in opérationnel
et inutilisable. Si vous renversez du liquide sur le produit, débranchez tous les câbles et
éteignez-le. Laissez le produit sécher complètement avant de le réutiliser. N’essayez pas
de le sécher avec un sèche-cheveux ou tout autre source de chaleur. Ne pas rebrancher le
produit à l’adaptateur si celui- ci est humide ou abimé.
Évitez d’exposer le produit à des températures extrêmes ou aux rayons du soleil.
Utilisez le produit quand la température se trouve entre 5ºC (40ºF) et 38ºC (100ºF).
Ne pas laisser le produit dans votre voiture car les voitures garées peuvent excéder les
températures pour assurer le bon fonctionnement de votre produit. Exposer ce produit
à des températures extrêmes peut diminuer la durée de vie des piles ou peut entrainer
l’arrêt de votre produit.
A utiliser soigneusement. Pour éviter toutes blessures, dommages ou autres, évitez de
le faire tomber et ne jamais le démonter, casser, trouer, mettre aux micro-ondes, bruler,
incérer un objet ou peindre le produit. Lavez vos mains avant de manipuler le produit si
celles-ci ont été en contact avec de la crème solaire ou autres produits chimiques.
Pour nettoyer. Débranchez le produit de tous ces câbles. Nettoyez le produit avec un
chiffon légèrement humide (eau froide). N’utilisez pas de savon, de lessive ou autres
produits chimiques. Ne jamais immerger le produit dans l’eau.
Ne pas brancher à une prise si le produit est humide ou endommagé.
Important Safety Instructions:
Please read all the Important Safety Instructions prior to using LEAPPAD™ ULTRA.
Failure to follow these safety instructions could result in fire, electric shock, or other injury
or damage to LEAPPAD ULTRA or other property.
ACCESSORIES: Please read all safety instructions for any accessories or other products
before using with LEAPPAD ULTRA. LeapFrog is not responsible for the operation of third-
party accessories or their compliance with safety and regulatory standards.
CAUTION: Routinely check this toy for proper and safe condition. If there is any dam-
age or broken parts, remove toy from use.
WARNING: The AC Adapter or USB cords could be a strangulation hazard. Not for
children under 3 years.
CAUTION: If for any reason the screen (display) is fractured or cracked, immediately
remove this product from use.
PROTECT YOUR HEARING: Long-term exposure to loud sounds, at high volume,
may result in permanent hearing loss. When using headphones or ear buds, it is recom-
mended that the product is listened to at lower volumes for shorter periods of time. Set
the volume while in a quiet environment; turn the volume down if you cannot hear people
speaking near you. Limit the listening time to 90 minutes, followed by a quiet period. The
louder the volume, the less time required before your hearing may be affected. If you ex-
perience ringing in your ears or hear muffled speech, stop listening and have your hearing
checked.
WARNING: It is rare but possible for seizures to be triggered by light flashes or pat-
terns. Play/watch in a well-lit room and take 10 to 15 minute breaks every hour.
Battery Replacement
WARNING: The lithium rechargeable battery cannot be removed from the product.
For your safety, never try to remove the battery. For power or battery issues, please contact
LeapFrog customer support. Contact information for your local support is available at www.
leapfrog.com/support
Battery Charging
LEAPPAD ULTRA is equipped with a rechargeable lithium-polymer battery. It will require
about 4 hours of charging using the included AC power adapter prior to use. Attempting to
charge via connection to the computer will take much longer.
CAUTION: The battery is only to be charged by adults or children 8+ years of age un-
der the full supervision of parents. You can charge the battery by using either the included
AC power adapter or connecting the provided USB cord to your computer. We recommend
using the provided AC power adapter.
Battery Charging in Progress Indication
When the battery is charging, the charge indicator LED will be yellow. When fully charged,
it will turn green. It will be OFF if not connected via USB or if not charging.
Repairing or Modifying LeapPad Ultra
Never attempt to repair or modify as LEAPPAD™ ULTRA does not contain any user-
serviceable parts. Service should only be provided by LeapFrog Enterprises, Inc.
If the product has been in contact with liquids, punctured, or subjected to a severe impact
or fall, immediately remove this product from use and contact LeapFrog Consumer Ser-
vices for replacement if under warranty.
For service information, go to: www.leapfrog.com/support
AC Adapter Safety
CAUTION: Use only the AC adapter provided with the product.
WARNING: Not suitable for children under 36 months. Misuse of transformer (AC
Adapter) can cause electric shock.
(Note: The word “transformer” is sometimes substituted for the word “adapter”. Use only
the included AC power adapter.
• Connection of the transformer to the wall outlet should be performed only by an adult
or child 8+ years of age.
• The transformer is not intended to be used as a toy, and the use of the transformer shall
be under the full supervision of parents.
• As with all electrical products, precautions should be observed during handling and use
to prevent electrical shock.
• The power adapter may become warm during normal use. Always allow adequate
ventilation and use care when handling the power adapter.
• Do not connect or disconnect with wet hands.
• The transformer should be periodically examined for conditions that may result in
the risk of fire, electrical shock or injury to persons, such as damage to the cord, plug,
blades, housing or other parts, and in the event of such conditions, the transformer
must not be used until the damage is repaired. The cord of this transformer cannot be
replaced; if the cord is damaged, dispose of the transformer in accordance with your
local electrical product recycling regulations.
Unplug the AC Adapter (transformer) if any of the following conditions exist:
• The power cord or plug, or the USB cord has become frayed or damaged.
• The power adapter is exposed to rain, liquid, or excessive moisture.
• The power adapter enclosure has become damaged.
• You suspect the power adapter needs service or repair.
To Clean AC Adapter, disconnect it from the wall and clean with a cloth dampened with
water. Do not immerse in water or use soap or other chemicals. Allow to dry before
reusing. Do not connect to the AC outlet if wet or damaged.
• This AC adapter can be used to recharge the single cell Li-Poly battery of the LeapFrog®
LEAPPAD ULTRA device (3.7Vdc, 4000mAh).
WARNING: DO NOT recharge non-rechargeable batteries.
For Europe - The toy must be used with a transformer for toys.
AC Adapter Electrical Ratings: Input: ~ 120VAC, 60Hz (for US); ~ 230VAC, 50Hz (for UK
or EU); ~ 240VAC, 50Hz (for AS/NZL) Output: DC5V, 1.5A, 7.5VA
Informations Importantes de sécurité :
Veuillez lire toutes les informations importantes de sécurité avant d’utiliser le LEAPPAD™ ULTRA.
Ne pas appliquer ces consignes peut engendrer des risques d’incendie, d’électrocutions, autres
blessures ou dommages au LEAPPAD ULTRA ou autres.
ACCESSOIRES : Lisez les instructions pour les accessoires ou tout autre produit avant de
les utiliser avec le LEAPPAD ULTRA. LeapFrog n’est pas responsable pour les accessoires
vendus par d’autres fabricants et leurs standards de sécurité.
ATTENTION : Vérifiez régulièrement que ce jouet est en bon état et qu’il ne présen-
te pas de danger. Dans le cas contraire (par exemple, s’il est cassé à certains endroits),
tenez ce jouet hors de portée des enfants.
ATTENTION : L’adaptateur AC ou le câble USB peuvent provoquer un risque
d’étranglement. Ne convient pas aux enfants de moins de 3 ans.
ATTENTION : Si pour quelque raison que ce soit, l’écran (d’affichage) est brisé ou
fendu, mettez immédiatement ce produit hors de portée des enfants.
PROTÉGEZ VOTRE OUÏE : Une exposition durable à des sonorités trop fortes peut
entraîner une perte définitive de l’ouïe. Lorsque vous utilisez le casque ou les écou-
teurs bouton, il est conseillé de baisser le volume et réduire le temps d’écoute. Réglez
le son lorsque vous êtes dans un endroit calme et baissez-le si vous n’entendez pas les
personnes qui parlent autour de vous. Limitez le temps d’écoute à 90 minutes, puis
accordez-vous un moment de tranquillité. Plus le volume est élevé, plus il y a de chances
que votre ouïe soit rapidement touchée. En cas de bourdonnement dans les oreilles ou
si vous entendez des voix sourdes, arrêtez immédiatement d’écouter ce produit et faites
contrôler votre ouïe dans les plus brefs délais.
ATTENTION : Il est rare mais possible que les lumières clignotantes ou les formes
provoquent des crises d’épilepsies. Jouez/regardez dans une pièce bien éclairée et prenez
des poses de 10 à 15 minutes toutes les heures.
Replacement des piles
ATTENTION : La pile rechargeable lithium ne peut être retirée de ce produit. Pour
votre sécurité, n’essayez jamais de retirer la pile. Si vous avez des problèmes concernant
la pile ou la batterie de votre produit, veuillez contacter le service client LeapFrog. Les
coordonnées sont disponibles à www.leapfrog.com/support
Recharger les piles
Le LEAPPAD ULTRA est équipé d’une pile lithium-polymère. Branchez-le avec l’adaptateur
AC pendant 4 heures avant de l’utiliser. Le recharger avec un ordinateur prendra plus de
temps.
ATTENTION : L’adaptateur et le cordon USB peuvent constituer un risque
d’étranglement. Ils ne doivent pas être utilisé par les enfants de moins de 3 ans. AT-
TENTION : Ne convient pas aux enfants de moins de 36 mois. L’utilisation inadaptée de
l’adaptateur peut causer une électrocution.
ATTENTION : La pile ne doit être chargée que par un adulte ou enfants de plus de
8 ans sous la supervision d’un parent exclusivement. Vous pouvez recharger la pile en
utilisant l’adaptateur AC ou en connectant le produit à votre ordinateur avec le câble USB
fournis. Nous recommandons l’utilisation de ceux inclus.
Parent Guide & Instructions
This guide contains important information. Please keep it for future reference. Ce guide
contient des informations importantes. Veuillez le conserver pour toute référence future.
USB Connector/
Charger
Power
Button
Volume Buttons
D-Pad
Cartridge Slot
Home Button
Camera/
Video
Recorder
Camera/
Video
Recorder
Charging
Light
Stylus Stylus Tether Points
Headphone Jack
Microphone
Speaker
™
Indication de chargement de la pile
Quand la pile se recharge, l’indicateur LED est jaune. Quand la pile est totalement
chargée, l’indicateur devient vert. L’indicateur ne fonctionnera pas si le produit n’est pas
connecté au câble USB ou s’il ne charge pas.
Réparer ou modifier LEAPPAD™ ULTRA
N’essayez jamais de réparer ou modifier le LEAPPAD ULTRA – car celui-ci ne contient au-
cune pièce qui peut être réparée individuellement. Toute aide doit être faite par LeapFrog
Enterprises, Inc.
Si le produit a été en contact avec du liquide, troué, ou victime d’un impact fort ou est
tombé, arrêter son utilisation immédiatement et contactez le service client LeapFrog pour
remplacer le produit si celui-ci est sous garantie.
Pour toute information, visitez www.leapfrog.com/support/LeapPad Ultra/Service.
Informations de sécurité pour l’adaptateur AC
ATTENTION : Utilisez uniquement adaptateur AC recommandé (transformateur)
pour recharger la pile. (Note : le mot transformateur est, des fois, remplacé par le mot
adaptateur). Utilisez uniquement adaptateur AC fourni.
ATTENTION : Ne convient pas aux enfants de moins de 36 mois. Une utilisation
inappropriée du transformateur (adaptateur AC) peut causer un risque d’électrocution.
• L’adaptateur doit être branché à la prise murale par un adulte ou un enfant de plus de 8
ans uniquement.
• Ce transformateur n’est pas un jouet, et son utilisation doit être faite uniquement sous
la présence d’un adulte.
• Comme avec tous produits électriques, des précautions doivent être utilisées pour
éviter des électrocutions.
• Le transformateur peut chauffer pendant son utilisation normale. Vérifiez que la
ventilation est adaptée et faites attention quand vous utilisez ce produit.
• Ne branchez ou débranchez pas le produit avec des mains mouillées.
• Le transformateur doit être vérifié régulièrement (les lames, la prise, la prise murale
et tout autre pièce) car si celui-ci est endommagé, il peut être un risque d’incendie,
d’électrocution ou autres blessures. Si celui-ci est abimé, arrêter de l’utiliser
immédiatement et attendez que celui-ci soit réparé avant de le réutiliser. Le câble de
cet adaptateur ne peut pas être remplacé, si le câble est abimé, jetez le transformateur
en suivant les règles de recyclage de votre région.
Débranchez l’adaptateur (transformateur) si une de ces conditions existe :
• Le câble, la prise ou le câble USB est abimé ou cassé.
• Le câble, la prise ou le câble USB sont exposés à la pluie, à du liquide ou une humidité
excessive.
• La boite de protection de l’adaptateur est abimée.
• Si vous pensez que l’adaptateur a besoin d’être réparé.
Débranchez le LEAPPAD ULTRA de l’adaptateur avant de le nettoyer.
• Pour nettoyer l’adaptateur, débranchez –le de la prise murale et nettoyez-le avec un
chiffon légèrement humide. Ne l’immergez pas dans l’eau, n’utilisez pas de savon
ou autres produits chimiques. Laissez le produit sécher avant de le réutiliser. Ne pas
brancher l’adaptateur si celui-ci est mouillé ou abimé.
• Ce jouet doit être utilisé avec un adaptateur pour jouets. Cet adaptateur CA doit
exclusivement être utilisé pour recharger la pile Li-Poly de la tablette LEAPPAD™
ULTRA LeapFrog (3.7Vdc, 4000mAh).
ATTENTION : NE PAS RECHARGER des piles pas rechargeables.
Pour l’Europe, ce jouet doit être utilisé avec un adaptateur pour jouets.
Caractéristiques électriques de l’adaptateur secteur : Voltage d’entrée 120 VAC, 60 Hz
(pour les États-Unis et Canada); 230 VAC, 50 Hz (Pour le Royaume-Uni et l’Europe); 240
VAC, 50Hz (pour l’Australie et la Nouvelle Zélande). Voltage de sortie : DC5V, 1.5A, 7.5VA.
Exposure to Radio Frequency Energy
LEAPPAD ULTRA contains a radio transmitter and receiver. When powered ON, LEAPPAD
ULTRA sends and receives radio frequency (RF) energy through its internal antenna. The
exposure requirements use units of measurement termed SAR (specific absorption rate).
LEAPPAD ULTRA has been tested and found to meet the SAR exposure requirements for
Wi-Fi operation as established by FCC, IC, and European Union guidelines.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications to this unit not expressly approved by LeapFrog could
void the EMC and wireless compliance and void the user’s authority to operate the equip-
ment. This product demonstrated EMC compliance using compliant peripheral devices
and shielded cables between system components. It is important that you use compliant
peripheral devices and shielded cables to reduce the possibility of causing interference to
radios, televisions, and other electronic devices.
USB Cable The USB cable provided with this product complies with FCC and other regula-
tory Emission limits. If using other than the provided USB cable, please note that in order
not to exceed FCC and other regulatory emissions limits, a shielded cable must be used.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause unde-
sired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
The highest SAR value as reported to the authorities for this tablet PC model when tested
for use against the body is 0.72 W/kg.
The tablet PC has been tested when positioned at 0 mm from the body without any metal
parts in the vicinity of the tablet PC or when properly used with an appropriate LeapFrog
Accessory.
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. The IC term stands for
“Industry Canada” followed by the certification number and all the “IC: 4810A-33200”
signifies is that the equipment meet the Radio Standard Specification RSS-210. The IC
certification number is located on the back of the enclosure.
Cet appareil numérique de la classe B est conforme à la norme ICES-003 du Canada.
Le terme IC signifie “Industrie Canada” et est. suivi du numéro de les certification “IC:
4810A-33200” signifient que l’équipement répond aux spécifi cations de la norme Radio
RSS-210. Le numéro de certification IC est situé à l’arrière de l’enceinte.
European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz).
This wireless device complies with the R&TTE Directive.
EU Declaration of Conformity
LeapFrog Enterprises, Inc., hereby declares that this Wi-Fi device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
LeapFrog Enterprises, Inc, déclare que ce produit Wi-Fi est conforme aux règles essenti-
elles requises et autres provisions de la Directive 1999/5/EC.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to
normal operation when the interference stops. If not, it may become necessary to turn the
power OFF and then back ON.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose
memory, requiring the user to reset the device by turning the power OFF and then back ON.
Recycling
For information on how this product might be recycled, visit www.leapfrog.com/recycle or
call (800) 701-5327.
Copyrighted Sofware
Certain software included in this product contains copyrighted software that is licensed
under the General Public License (GPL). A copy of that license is included below in this
document. Anyone may obtain from us the complete corresponding source code for the
software covered by the GPL for a period of three years after our last shipment of this
product by contacting LeapFrog customer service at [email protected].
Please write “GPL source code for LeapPad Ultra” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the
physical media on which the source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
PREAMBLE
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software—to make sure the software is free for all
its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose
authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge
for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use
pieces of it in new free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example,
if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You
must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission
to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its
recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original
authors’ reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The “Program,” below, refers to any such program or work, and a “work
based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing
the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term “modification”). Each licensee is addressed as “you.” Activities other than
copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program
is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (inde-
pendent of having been made by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all
the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of
this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does
not normally print such an announcement, your work based on the Program is not required to print an announcement.) These
requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and
can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to
those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which
is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation
of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the
terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of phys-
ically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information
you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution
and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used
to control compilation and installation of the executable. However, as a special exception, the source code distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose
any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance
by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at
all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the
purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such
claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is imple-
mented by public license practices. Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to
make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each
version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it
and “any later version”, you have the option of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose
any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to
the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INAC-
CURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TM & © 2013 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com/leappad
Recommended for children ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
Model: LEAPPAD ULTRA
Model: 33200/33300/83333/83334/83335/83336/83337/83338
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
Item numbers: 33200/33300/83333/83334/83335/83336/83337/83338
Part Number: 605-11951-A
Certification and Compliance
U.S. Model: 33200 FCC ID: QDX33200
Canada Model: 33200 IC ID: 4810A-33200
Meets ICES 003
E.U.
0700
NB Number
Indication de chargement de la pile
Quand la pile se recharge, l’indicateur LED est jaune. Quand la pile est totalement
chargée, l’indicateur devient vert. L’indicateur ne fonctionnera pas si le produit n’est pas
connecté au câble USB ou s’il ne charge pas.
Réparer ou modifier LEAPPAD™ ULTRA
N’essayez jamais de réparer ou modifier le LEAPPAD ULTRA – car celui-ci ne contient au-
cune pièce qui peut être réparée individuellement. Toute aide doit être faite par LeapFrog
Enterprises, Inc.
Si le produit a été en contact avec du liquide, troué, ou victime d’un impact fort ou est
tombé, arrêter son utilisation immédiatement et contactez le service client LeapFrog pour
remplacer le produit si celui-ci est sous garantie.
Pour toute information, visitez www.leapfrog.com/support/LeapPad Ultra/Service.
Informations de sécurité pour l’adaptateur AC
ATTENTION : Utilisez uniquement adaptateur AC recommandé (transformateur)
pour recharger la pile. (Note : le mot transformateur est, des fois, remplacé par le mot
adaptateur). Utilisez uniquement adaptateur AC fourni.
ATTENTION : Ne convient pas aux enfants de moins de 36 mois. Une utilisation
inappropriée du transformateur (adaptateur AC) peut causer un risque d’électrocution.
• L’adaptateur doit être branché à la prise murale par un adulte ou un enfant de plus de 8
ans uniquement.
• Ce transformateur n’est pas un jouet, et son utilisation doit être faite uniquement sous
la présence d’un adulte.
• Comme avec tous produits électriques, des précautions doivent être utilisées pour
éviter des électrocutions.
• Le transformateur peut chauffer pendant son utilisation normale. Vérifiez que la
ventilation est adaptée et faites attention quand vous utilisez ce produit.
• Ne branchez ou débranchez pas le produit avec des mains mouillées.
• Le transformateur doit être vérifié régulièrement (les lames, la prise, la prise murale
et tout autre pièce) car si celui-ci est endommagé, il peut être un risque d’incendie,
d’électrocution ou autres blessures. Si celui-ci est abimé, arrêter de l’utiliser
immédiatement et attendez que celui-ci soit réparé avant de le réutiliser. Le câble de
cet adaptateur ne peut pas être remplacé, si le câble est abimé, jetez le transformateur
en suivant les règles de recyclage de votre région.
Débranchez l’adaptateur (transformateur) si une de ces conditions existe :
• Le câble, la prise ou le câble USB est abimé ou cassé.
• Le câble, la prise ou le câble USB sont exposés à la pluie, à du liquide ou une humidité
excessive.
• La boite de protection de l’adaptateur est abimée.
• Si vous pensez que l’adaptateur a besoin d’être réparé.
Débranchez le LEAPPAD ULTRA de l’adaptateur avant de le nettoyer.
• Pour nettoyer l’adaptateur, débranchez –le de la prise murale et nettoyez-le avec un
chiffon légèrement humide. Ne l’immergez pas dans l’eau, n’utilisez pas de savon
ou autres produits chimiques. Laissez le produit sécher avant de le réutiliser. Ne pas
brancher l’adaptateur si celui-ci est mouillé ou abimé.
• Ce jouet doit être utilisé avec un adaptateur pour jouets. Cet adaptateur CA doit
exclusivement être utilisé pour recharger la pile Li-Poly de la tablette LEAPPAD™
ULTRA LeapFrog (3.7Vdc, 4000mAh).
ATTENTION : NE PAS RECHARGER des piles pas rechargeables.
Pour l’Europe, ce jouet doit être utilisé avec un adaptateur pour jouets.
Caractéristiques électriques de l’adaptateur secteur : Voltage d’entrée 120 VAC, 60 Hz
(pour les États-Unis et Canada); 230 VAC, 50 Hz (Pour le Royaume-Uni et l’Europe); 240
VAC, 50Hz (pour l’Australie et la Nouvelle Zélande). Voltage de sortie : DC5V, 1.5A, 7.5VA.
Exposure to Radio Frequency Energy
LEAPPAD ULTRA contains a radio transmitter and receiver. When powered ON, LEAPPAD
ULTRA sends and receives radio frequency (RF) energy through its internal antenna. The
exposure requirements use units of measurement termed SAR (specific absorption rate).
LEAPPAD ULTRA has been tested and found to meet the SAR exposure requirements for
Wi-Fi operation as established by FCC, IC, and European Union guidelines.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications to this unit not expressly approved by LeapFrog could
void the EMC and wireless compliance and void the user’s authority to operate the equip-
ment. This product demonstrated EMC compliance using compliant peripheral devices
and shielded cables between system components. It is important that you use compliant
peripheral devices and shielded cables to reduce the possibility of causing interference to
radios, televisions, and other electronic devices.
USB Cable The USB cable provided with this product complies with FCC and other regula-
tory Emission limits. If using other than the provided USB cable, please note that in order
not to exceed FCC and other regulatory emissions limits, a shielded cable must be used.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause unde-
sired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
The highest SAR value as reported to the authorities for this tablet PC model when tested
for use against the body is 0.72 W/kg.
The tablet PC has been tested when positioned at 0 mm from the body without any metal
parts in the vicinity of the tablet PC or when properly used with an appropriate LeapFrog
Accessory.
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. The IC term stands for
“Industry Canada” followed by the certification number and all the “IC: 4810A-33200”
signifies is that the equipment meet the Radio Standard Specification RSS-210. The IC
certification number is located on the back of the enclosure.
Cet appareil numérique de la classe B est conforme à la norme ICES-003 du Canada.
Le terme IC signifie “Industrie Canada” et est. suivi du numéro de les certification “IC:
4810A-33200” signifient que l’équipement répond aux spécifi cations de la norme Radio
RSS-210. Le numéro de certification IC est situé à l’arrière de l’enceinte.
European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz).
This wireless device complies with the R&TTE Directive.
EU Declaration of Conformity
LeapFrog Enterprises, Inc., hereby declares that this Wi-Fi device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
LeapFrog Enterprises, Inc, déclare que ce produit Wi-Fi est conforme aux règles essenti-
elles requises et autres provisions de la Directive 1999/5/EC.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to
normal operation when the interference stops. If not, it may become necessary to turn the
power OFF and then back ON.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose
memory, requiring the user to reset the device by turning the power OFF and then back ON.
Recycling
For information on how this product might be recycled, visit www.leapfrog.com/recycle or
call (800) 701-5327.
Copyrighted Sofware
Certain software included in this product contains copyrighted software that is licensed
under the General Public License (GPL). A copy of that license is included below in this
document. Anyone may obtain from us the complete corresponding source code for the
software covered by the GPL for a period of three years after our last shipment of this
product by contacting LeapFrog customer service at [email protected].
Please write “GPL source code for LeapPad Ultra” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the
physical media on which the source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
PREAMBLE
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software—to make sure the software is free for all
its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose
authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge
for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use
pieces of it in new free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example,
if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You
must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission
to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its
recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original
authors’ reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The “Program,” below, refers to any such program or work, and a “work
based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing
the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term “modification”). Each licensee is addressed as “you.” Activities other than
copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program
is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (inde-
pendent of having been made by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all
the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of
this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does
not normally print such an announcement, your work based on the Program is not required to print an announcement.) These
requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and
can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to
those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which
is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation
of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the
terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of phys-
ically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information
you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution
and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used
to control compilation and installation of the executable. However, as a special exception, the source code distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose
any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance
by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at
all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the
purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such
claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is imple-
mented by public license practices. Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to
make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each
version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it
and “any later version”, you have the option of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose
any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to
the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INAC-
CURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TM & © 2013 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com/leappad
Recommended for children ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
Model: LEAPPAD ULTRA
Model: 33200/33300/83333/83334/83335/83336/83337/83338
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
Item numbers: 33200/33300/83333/83334/83335/83336/83337/83338
Part Number: 605-11951-A
Certification and Compliance
U.S. Model: 33200 FCC ID: QDX33200
Canada Model: 33200 IC ID: 4810A-33200
Meets ICES 003
E.U.
0700
NB Number
Indication de chargement de la pile
Quand la pile se recharge, l’indicateur LED est jaune. Quand la pile est totalement
chargée, l’indicateur devient vert. L’indicateur ne fonctionnera pas si le produit n’est pas
connecté au câble USB ou s’il ne charge pas.
Réparer ou modifier LEAPPAD™ ULTRA
N’essayez jamais de réparer ou modifier le LEAPPAD ULTRA – car celui-ci ne contient au-
cune pièce qui peut être réparée individuellement. Toute aide doit être faite par LeapFrog
Enterprises, Inc.
Si le produit a été en contact avec du liquide, troué, ou victime d’un impact fort ou est
tombé, arrêter son utilisation immédiatement et contactez le service client LeapFrog pour
remplacer le produit si celui-ci est sous garantie.
Pour toute information, visitez www.leapfrog.com/support/LeapPad Ultra/Service.
Informations de sécurité pour l’adaptateur AC
ATTENTION : Utilisez uniquement adaptateur AC recommandé (transformateur)
pour recharger la pile. (Note : le mot transformateur est, des fois, remplacé par le mot
adaptateur). Utilisez uniquement adaptateur AC fourni.
ATTENTION : Ne convient pas aux enfants de moins de 36 mois. Une utilisation
inappropriée du transformateur (adaptateur AC) peut causer un risque d’électrocution.
• L’adaptateur doit être branché à la prise murale par un adulte ou un enfant de plus de 8
ans uniquement.
• Ce transformateur n’est pas un jouet, et son utilisation doit être faite uniquement sous
la présence d’un adulte.
• Comme avec tous produits électriques, des précautions doivent être utilisées pour
éviter des électrocutions.
• Le transformateur peut chauffer pendant son utilisation normale. Vérifiez que la
ventilation est adaptée et faites attention quand vous utilisez ce produit.
• Ne branchez ou débranchez pas le produit avec des mains mouillées.
• Le transformateur doit être vérifié régulièrement (les lames, la prise, la prise murale
et tout autre pièce) car si celui-ci est endommagé, il peut être un risque d’incendie,
d’électrocution ou autres blessures. Si celui-ci est abimé, arrêter de l’utiliser
immédiatement et attendez que celui-ci soit réparé avant de le réutiliser. Le câble de
cet adaptateur ne peut pas être remplacé, si le câble est abimé, jetez le transformateur
en suivant les règles de recyclage de votre région.
Débranchez l’adaptateur (transformateur) si une de ces conditions existe :
• Le câble, la prise ou le câble USB est abimé ou cassé.
• Le câble, la prise ou le câble USB sont exposés à la pluie, à du liquide ou une humidité
excessive.
• La boite de protection de l’adaptateur est abimée.
• Si vous pensez que l’adaptateur a besoin d’être réparé.
Débranchez le LEAPPAD ULTRA de l’adaptateur avant de le nettoyer.
• Pour nettoyer l’adaptateur, débranchez –le de la prise murale et nettoyez-le avec un
chiffon légèrement humide. Ne l’immergez pas dans l’eau, n’utilisez pas de savon
ou autres produits chimiques. Laissez le produit sécher avant de le réutiliser. Ne pas
brancher l’adaptateur si celui-ci est mouillé ou abimé.
• Ce jouet doit être utilisé avec un adaptateur pour jouets. Cet adaptateur CA doit
exclusivement être utilisé pour recharger la pile Li-Poly de la tablette LEAPPAD™
ULTRA LeapFrog (3.7Vdc, 4000mAh).
ATTENTION : NE PAS RECHARGER des piles pas rechargeables.
Pour l’Europe, ce jouet doit être utilisé avec un adaptateur pour jouets.
Caractéristiques électriques de l’adaptateur secteur : Voltage d’entrée 120 VAC, 60 Hz
(pour les États-Unis et Canada); 230 VAC, 50 Hz (Pour le Royaume-Uni et l’Europe); 240
VAC, 50Hz (pour l’Australie et la Nouvelle Zélande). Voltage de sortie : DC5V, 1.5A, 7.5VA.
Exposure to Radio Frequency Energy
LEAPPAD ULTRA contains a radio transmitter and receiver. When powered ON, LEAPPAD
ULTRA sends and receives radio frequency (RF) energy through its internal antenna. The
exposure requirements use units of measurement termed SAR (specific absorption rate).
LEAPPAD ULTRA has been tested and found to meet the SAR exposure requirements for
Wi-Fi operation as established by FCC, IC, and European Union guidelines.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications to this unit not expressly approved by LeapFrog could
void the EMC and wireless compliance and void the user’s authority to operate the equip-
ment. This product demonstrated EMC compliance using compliant peripheral devices
and shielded cables between system components. It is important that you use compliant
peripheral devices and shielded cables to reduce the possibility of causing interference to
radios, televisions, and other electronic devices.
USB Cable The USB cable provided with this product complies with FCC and other regula-
tory Emission limits. If using other than the provided USB cable, please note that in order
not to exceed FCC and other regulatory emissions limits, a shielded cable must be used.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause unde-
sired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
The highest SAR value as reported to the authorities for this tablet PC model when tested
for use against the body is 0.72 W/kg.
The tablet PC has been tested when positioned at 0 mm from the body without any metal
parts in the vicinity of the tablet PC or when properly used with an appropriate LeapFrog
Accessory.
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. The IC term stands for
“Industry Canada” followed by the certification number and all the “IC: 4810A-33200”
signifies is that the equipment meet the Radio Standard Specification RSS-210. The IC
certification number is located on the back of the enclosure.
Cet appareil numérique de la classe B est conforme à la norme ICES-003 du Canada.
Le terme IC signifie “Industrie Canada” et est. suivi du numéro de les certification “IC:
4810A-33200” signifient que l’équipement répond aux spécifi cations de la norme Radio
RSS-210. Le numéro de certification IC est situé à l’arrière de l’enceinte.
European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz).
This wireless device complies with the R&TTE Directive.
EU Declaration of Conformity
LeapFrog Enterprises, Inc., hereby declares that this Wi-Fi device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
LeapFrog Enterprises, Inc, déclare que ce produit Wi-Fi est conforme aux règles essenti-
elles requises et autres provisions de la Directive 1999/5/EC.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to
normal operation when the interference stops. If not, it may become necessary to turn the
power OFF and then back ON.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose
memory, requiring the user to reset the device by turning the power OFF and then back ON.
Recycling
For information on how this product might be recycled, visit www.leapfrog.com/recycle or
call (800) 701-5327.
Copyrighted Sofware
Certain software included in this product contains copyrighted software that is licensed
under the General Public License (GPL). A copy of that license is included below in this
document. Anyone may obtain from us the complete corresponding source code for the
software covered by the GPL for a period of three years after our last shipment of this
product by contacting LeapFrog customer service at [email protected].
Please write “GPL source code for LeapPad Ultra” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the
physical media on which the source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
PREAMBLE
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software—to make sure the software is free for all
its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose
authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge
for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use
pieces of it in new free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example,
if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You
must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission
to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its
recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original
authors’ reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The “Program,” below, refers to any such program or work, and a “work
based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing
the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term “modification”). Each licensee is addressed as “you.” Activities other than
copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program
is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (inde-
pendent of having been made by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all
the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of
this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does
not normally print such an announcement, your work based on the Program is not required to print an announcement.) These
requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and
can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to
those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which
is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation
of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the
terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of phys-
ically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information
you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution
and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used
to control compilation and installation of the executable. However, as a special exception, the source code distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose
any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance
by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at
all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the
purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such
claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is imple-
mented by public license practices. Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to
make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each
version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it
and “any later version”, you have the option of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose
any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to
the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INAC-
CURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TM & © 2013 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com/leappad
Recommended for children ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
Model: LEAPPAD ULTRA
Model: 33200/33300/83333/83334/83335/83336/83337/83338
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
Item numbers: 33200/33300/83333/83334/83335/83336/83337/83338
Part Number: 605-11951-A
Certification and Compliance
U.S. Model: 33200 FCC ID: QDX33200
Canada Model: 33200 IC ID: 4810A-33200
Meets ICES 003
E.U.
0700
NB Number
Indication de chargement de la pile
Quand la pile se recharge, l’indicateur LED est jaune. Quand la pile est totalement
chargée, l’indicateur devient vert. L’indicateur ne fonctionnera pas si le produit n’est pas
connecté au câble USB ou s’il ne charge pas.
Réparer ou modifier LEAPPAD™ ULTRA
N’essayez jamais de réparer ou modifier le LEAPPAD ULTRA – car celui-ci ne contient au-
cune pièce qui peut être réparée individuellement. Toute aide doit être faite par LeapFrog
Enterprises, Inc.
Si le produit a été en contact avec du liquide, troué, ou victime d’un impact fort ou est
tombé, arrêter son utilisation immédiatement et contactez le service client LeapFrog pour
remplacer le produit si celui-ci est sous garantie.
Pour toute information, visitez www.leapfrog.com/support/LeapPad Ultra/Service.
Informations de sécurité pour l’adaptateur AC
ATTENTION : Utilisez uniquement adaptateur AC recommandé (transformateur)
pour recharger la pile. (Note : le mot transformateur est, des fois, remplacé par le mot
adaptateur). Utilisez uniquement adaptateur AC fourni.
ATTENTION : Ne convient pas aux enfants de moins de 36 mois. Une utilisation
inappropriée du transformateur (adaptateur AC) peut causer un risque d’électrocution.
• L’adaptateur doit être branché à la prise murale par un adulte ou un enfant de plus de 8
ans uniquement.
• Ce transformateur n’est pas un jouet, et son utilisation doit être faite uniquement sous
la présence d’un adulte.
• Comme avec tous produits électriques, des précautions doivent être utilisées pour
éviter des électrocutions.
• Le transformateur peut chauffer pendant son utilisation normale. Vérifiez que la
ventilation est adaptée et faites attention quand vous utilisez ce produit.
• Ne branchez ou débranchez pas le produit avec des mains mouillées.
• Le transformateur doit être vérifié régulièrement (les lames, la prise, la prise murale
et tout autre pièce) car si celui-ci est endommagé, il peut être un risque d’incendie,
d’électrocution ou autres blessures. Si celui-ci est abimé, arrêter de l’utiliser
immédiatement et attendez que celui-ci soit réparé avant de le réutiliser. Le câble de
cet adaptateur ne peut pas être remplacé, si le câble est abimé, jetez le transformateur
en suivant les règles de recyclage de votre région.
Débranchez l’adaptateur (transformateur) si une de ces conditions existe :
• Le câble, la prise ou le câble USB est abimé ou cassé.
• Le câble, la prise ou le câble USB sont exposés à la pluie, à du liquide ou une humidité
excessive.
• La boite de protection de l’adaptateur est abimée.
• Si vous pensez que l’adaptateur a besoin d’être réparé.
Débranchez le LEAPPAD ULTRA de l’adaptateur avant de le nettoyer.
• Pour nettoyer l’adaptateur, débranchez –le de la prise murale et nettoyez-le avec un
chiffon légèrement humide. Ne l’immergez pas dans l’eau, n’utilisez pas de savon
ou autres produits chimiques. Laissez le produit sécher avant de le réutiliser. Ne pas
brancher l’adaptateur si celui-ci est mouillé ou abimé.
• Ce jouet doit être utilisé avec un adaptateur pour jouets. Cet adaptateur CA doit
exclusivement être utilisé pour recharger la pile Li-Poly de la tablette LEAPPAD™
ULTRA LeapFrog (3.7Vdc, 4000mAh).
ATTENTION : NE PAS RECHARGER des piles pas rechargeables.
Pour l’Europe, ce jouet doit être utilisé avec un adaptateur pour jouets.
Caractéristiques électriques de l’adaptateur secteur : Voltage d’entrée 120 VAC, 60 Hz
(pour les États-Unis et Canada); 230 VAC, 50 Hz (Pour le Royaume-Uni et l’Europe); 240
VAC, 50Hz (pour l’Australie et la Nouvelle Zélande). Voltage de sortie : DC5V, 1.5A, 7.5VA.
Exposure to Radio Frequency Energy
LEAPPAD ULTRA contains a radio transmitter and receiver. When powered ON, LEAPPAD
ULTRA sends and receives radio frequency (RF) energy through its internal antenna. The
exposure requirements use units of measurement termed SAR (specific absorption rate).
LEAPPAD ULTRA has been tested and found to meet the SAR exposure requirements for
Wi-Fi operation as established by FCC, IC, and European Union guidelines.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications to this unit not expressly approved by LeapFrog could
void the EMC and wireless compliance and void the user’s authority to operate the equip-
ment. This product demonstrated EMC compliance using compliant peripheral devices
and shielded cables between system components. It is important that you use compliant
peripheral devices and shielded cables to reduce the possibility of causing interference to
radios, televisions, and other electronic devices.
USB Cable The USB cable provided with this product complies with FCC and other regula-
tory Emission limits. If using other than the provided USB cable, please note that in order
not to exceed FCC and other regulatory emissions limits, a shielded cable must be used.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause unde-
sired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
The highest SAR value as reported to the authorities for this tablet PC model when tested
for use against the body is 0.72 W/kg.
The tablet PC has been tested when positioned at 0 mm from the body without any metal
parts in the vicinity of the tablet PC or when properly used with an appropriate LeapFrog
Accessory.
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. The IC term stands for
“Industry Canada” followed by the certification number and all the “IC: 4810A-33200”
signifies is that the equipment meet the Radio Standard Specification RSS-210. The IC
certification number is located on the back of the enclosure.
Cet appareil numérique de la classe B est conforme à la norme ICES-003 du Canada.
Le terme IC signifie “Industrie Canada” et est. suivi du numéro de les certification “IC:
4810A-33200” signifient que l’équipement répond aux spécifi cations de la norme Radio
RSS-210. Le numéro de certification IC est situé à l’arrière de l’enceinte.
European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz).
This wireless device complies with the R&TTE Directive.
EU Declaration of Conformity
LeapFrog Enterprises, Inc., hereby declares that this Wi-Fi device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
LeapFrog Enterprises, Inc, déclare que ce produit Wi-Fi est conforme aux règles essenti-
elles requises et autres provisions de la Directive 1999/5/EC.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to
normal operation when the interference stops. If not, it may become necessary to turn the
power OFF and then back ON.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose
memory, requiring the user to reset the device by turning the power OFF and then back ON.
Recycling
For information on how this product might be recycled, visit www.leapfrog.com/recycle or
call (800) 701-5327.
Copyrighted Sofware
Certain software included in this product contains copyrighted software that is licensed
under the General Public License (GPL). A copy of that license is included below in this
document. Anyone may obtain from us the complete corresponding source code for the
software covered by the GPL for a period of three years after our last shipment of this
product by contacting LeapFrog customer service at [email protected].
Please write “GPL source code for LeapPad Ultra” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the
physical media on which the source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
PREAMBLE
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software—to make sure the software is free for all
its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose
authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge
for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use
pieces of it in new free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example,
if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You
must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission
to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its
recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original
authors’ reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The “Program,” below, refers to any such program or work, and a “work
based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing
the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term “modification”). Each licensee is addressed as “you.” Activities other than
copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program
is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (inde-
pendent of having been made by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all
the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of
this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does
not normally print such an announcement, your work based on the Program is not required to print an announcement.) These
requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and
can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to
those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which
is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation
of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the
terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of phys-
ically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information
you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution
and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used
to control compilation and installation of the executable. However, as a special exception, the source code distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose
any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance
by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at
all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the
purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such
claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is imple-
mented by public license practices. Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to
make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each
version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it
and “any later version”, you have the option of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose
any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to
the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INAC-
CURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TM & © 2013 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com/leappad
Recommended for children ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
Model: LEAPPAD ULTRA
Model: 33200/33300/83333/83334/83335/83336/83337/83338
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
Item numbers: 33200/33300/83333/83334/83335/83336/83337/83338
Part Number: 605-11951-A
Certification and Compliance
U.S. Model: 33200 FCC ID: QDX33200
Canada Model: 33200 IC ID: 4810A-33200
Meets ICES 003
E.U.
0700
NB Number
Indication de chargement de la pile
Quand la pile se recharge, l’indicateur LED est jaune. Quand la pile est totalement
chargée, l’indicateur devient vert. L’indicateur ne fonctionnera pas si le produit n’est pas
connecté au câble USB ou s’il ne charge pas.
Réparer ou modifier LEAPPAD™ ULTRA
N’essayez jamais de réparer ou modifier le LEAPPAD ULTRA – car celui-ci ne contient au-
cune pièce qui peut être réparée individuellement. Toute aide doit être faite par LeapFrog
Enterprises, Inc.
Si le produit a été en contact avec du liquide, troué, ou victime d’un impact fort ou est
tombé, arrêter son utilisation immédiatement et contactez le service client LeapFrog pour
remplacer le produit si celui-ci est sous garantie.
Pour toute information, visitez www.leapfrog.com/support/LeapPad Ultra/Service.
Informations de sécurité pour l’adaptateur AC
ATTENTION : Utilisez uniquement adaptateur AC recommandé (transformateur)
pour recharger la pile. (Note : le mot transformateur est, des fois, remplacé par le mot
adaptateur). Utilisez uniquement adaptateur AC fourni.
ATTENTION : Ne convient pas aux enfants de moins de 36 mois. Une utilisation
inappropriée du transformateur (adaptateur AC) peut causer un risque d’électrocution.
• L’adaptateur doit être branché à la prise murale par un adulte ou un enfant de plus de 8
ans uniquement.
• Ce transformateur n’est pas un jouet, et son utilisation doit être faite uniquement sous
la présence d’un adulte.
• Comme avec tous produits électriques, des précautions doivent être utilisées pour
éviter des électrocutions.
• Le transformateur peut chauffer pendant son utilisation normale. Vérifiez que la
ventilation est adaptée et faites attention quand vous utilisez ce produit.
• Ne branchez ou débranchez pas le produit avec des mains mouillées.
• Le transformateur doit être vérifié régulièrement (les lames, la prise, la prise murale
et tout autre pièce) car si celui-ci est endommagé, il peut être un risque d’incendie,
d’électrocution ou autres blessures. Si celui-ci est abimé, arrêter de l’utiliser
immédiatement et attendez que celui-ci soit réparé avant de le réutiliser. Le câble de
cet adaptateur ne peut pas être remplacé, si le câble est abimé, jetez le transformateur
en suivant les règles de recyclage de votre région.
Débranchez l’adaptateur (transformateur) si une de ces conditions existe :
• Le câble, la prise ou le câble USB est abimé ou cassé.
• Le câble, la prise ou le câble USB sont exposés à la pluie, à du liquide ou une humidité
excessive.
• La boite de protection de l’adaptateur est abimée.
• Si vous pensez que l’adaptateur a besoin d’être réparé.
Débranchez le LEAPPAD ULTRA de l’adaptateur avant de le nettoyer.
• Pour nettoyer l’adaptateur, débranchez –le de la prise murale et nettoyez-le avec un
chiffon légèrement humide. Ne l’immergez pas dans l’eau, n’utilisez pas de savon
ou autres produits chimiques. Laissez le produit sécher avant de le réutiliser. Ne pas
brancher l’adaptateur si celui-ci est mouillé ou abimé.
• Ce jouet doit être utilisé avec un adaptateur pour jouets. Cet adaptateur CA doit
exclusivement être utilisé pour recharger la pile Li-Poly de la tablette LEAPPAD™
ULTRA LeapFrog (3.7Vdc, 4000mAh).
ATTENTION : NE PAS RECHARGER des piles pas rechargeables.
Pour l’Europe, ce jouet doit être utilisé avec un adaptateur pour jouets.
Caractéristiques électriques de l’adaptateur secteur : Voltage d’entrée 120 VAC, 60 Hz
(pour les États-Unis et Canada); 230 VAC, 50 Hz (Pour le Royaume-Uni et l’Europe); 240
VAC, 50Hz (pour l’Australie et la Nouvelle Zélande). Voltage de sortie : DC5V, 1.5A, 7.5VA.
Exposure to Radio Frequency Energy
LEAPPAD ULTRA contains a radio transmitter and receiver. When powered ON, LEAPPAD
ULTRA sends and receives radio frequency (RF) energy through its internal antenna. The
exposure requirements use units of measurement termed SAR (specific absorption rate).
LEAPPAD ULTRA has been tested and found to meet the SAR exposure requirements for
Wi-Fi operation as established by FCC, IC, and European Union guidelines.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications to this unit not expressly approved by LeapFrog could
void the EMC and wireless compliance and void the user’s authority to operate the equip-
ment. This product demonstrated EMC compliance using compliant peripheral devices
and shielded cables between system components. It is important that you use compliant
peripheral devices and shielded cables to reduce the possibility of causing interference to
radios, televisions, and other electronic devices.
USB Cable The USB cable provided with this product complies with FCC and other regula-
tory Emission limits. If using other than the provided USB cable, please note that in order
not to exceed FCC and other regulatory emissions limits, a shielded cable must be used.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause unde-
sired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
The highest SAR value as reported to the authorities for this tablet PC model when tested
for use against the body is 0.72 W/kg.
The tablet PC has been tested when positioned at 0 mm from the body without any metal
parts in the vicinity of the tablet PC or when properly used with an appropriate LeapFrog
Accessory.
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. The IC term stands for
“Industry Canada” followed by the certification number and all the “IC: 4810A-33200”
signifies is that the equipment meet the Radio Standard Specification RSS-210. The IC
certification number is located on the back of the enclosure.
Cet appareil numérique de la classe B est conforme à la norme ICES-003 du Canada.
Le terme IC signifie “Industrie Canada” et est. suivi du numéro de les certification “IC:
4810A-33200” signifient que l’équipement répond aux spécifi cations de la norme Radio
RSS-210. Le numéro de certification IC est situé à l’arrière de l’enceinte.
European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz).
This wireless device complies with the R&TTE Directive.
EU Declaration of Conformity
LeapFrog Enterprises, Inc., hereby declares that this Wi-Fi device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
LeapFrog Enterprises, Inc, déclare que ce produit Wi-Fi est conforme aux règles essenti-
elles requises et autres provisions de la Directive 1999/5/EC.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to
normal operation when the interference stops. If not, it may become necessary to turn the
power OFF and then back ON.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose
memory, requiring the user to reset the device by turning the power OFF and then back ON.
Recycling
For information on how this product might be recycled, visit www.leapfrog.com/recycle or
call (800) 701-5327.
Copyrighted Sofware
Certain software included in this product contains copyrighted software that is licensed
under the General Public License (GPL). A copy of that license is included below in this
document. Anyone may obtain from us the complete corresponding source code for the
software covered by the GPL for a period of three years after our last shipment of this
product by contacting LeapFrog customer service at [email protected].
Please write “GPL source code for LeapPad Ultra” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the
physical media on which the source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
PREAMBLE
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software—to make sure the software is free for all
its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose
authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge
for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use
pieces of it in new free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example,
if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You
must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission
to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its
recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original
authors’ reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The “Program,” below, refers to any such program or work, and a “work
based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing
the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term “modification”). Each licensee is addressed as “you.” Activities other than
copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program
is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (inde-
pendent of having been made by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all
the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of
this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does
not normally print such an announcement, your work based on the Program is not required to print an announcement.) These
requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and
can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to
those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which
is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation
of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the
terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of phys-
ically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information
you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution
and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used
to control compilation and installation of the executable. However, as a special exception, the source code distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose
any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance
by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at
all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the
purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such
claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is imple-
mented by public license practices. Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to
make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each
version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it
and “any later version”, you have the option of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose
any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to
the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INAC-
CURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TM & © 2013 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com/leappad
Recommended for children ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
Model: LEAPPAD ULTRA
Model: 33200/33300/83333/83334/83335/83336/83337/83338
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
Item numbers: 33200/33300/83333/83334/83335/83336/83337/83338
Part Number: 605-11951-A
Certification and Compliance
U.S. Model: 33200 FCC ID: QDX33200
Canada Model: 33200 IC ID: 4810A-33200
Meets ICES 003
E.U.
0700
NB Number
Indication de chargement de la pile
Quand la pile se recharge, l’indicateur LED est jaune. Quand la pile est totalement
chargée, l’indicateur devient vert. L’indicateur ne fonctionnera pas si le produit n’est pas
connecté au câble USB ou s’il ne charge pas.
Réparer ou modifier LEAPPAD™ ULTRA
N’essayez jamais de réparer ou modifier le LEAPPAD ULTRA – car celui-ci ne contient au-
cune pièce qui peut être réparée individuellement. Toute aide doit être faite par LeapFrog
Enterprises, Inc.
Si le produit a été en contact avec du liquide, troué, ou victime d’un impact fort ou est
tombé, arrêter son utilisation immédiatement et contactez le service client LeapFrog pour
remplacer le produit si celui-ci est sous garantie.
Pour toute information, visitez www.leapfrog.com/support/LeapPad Ultra/Service.
Informations de sécurité pour l’adaptateur AC
ATTENTION : Utilisez uniquement adaptateur AC recommandé (transformateur)
pour recharger la pile. (Note : le mot transformateur est, des fois, remplacé par le mot
adaptateur). Utilisez uniquement adaptateur AC fourni.
ATTENTION : Ne convient pas aux enfants de moins de 36 mois. Une utilisation
inappropriée du transformateur (adaptateur AC) peut causer un risque d’électrocution.
• L’adaptateur doit être branché à la prise murale par un adulte ou un enfant de plus de 8
ans uniquement.
• Ce transformateur n’est pas un jouet, et son utilisation doit être faite uniquement sous
la présence d’un adulte.
• Comme avec tous produits électriques, des précautions doivent être utilisées pour
éviter des électrocutions.
• Le transformateur peut chauffer pendant son utilisation normale. Vérifiez que la
ventilation est adaptée et faites attention quand vous utilisez ce produit.
• Ne branchez ou débranchez pas le produit avec des mains mouillées.
• Le transformateur doit être vérifié régulièrement (les lames, la prise, la prise murale
et tout autre pièce) car si celui-ci est endommagé, il peut être un risque d’incendie,
d’électrocution ou autres blessures. Si celui-ci est abimé, arrêter de l’utiliser
immédiatement et attendez que celui-ci soit réparé avant de le réutiliser. Le câble de
cet adaptateur ne peut pas être remplacé, si le câble est abimé, jetez le transformateur
en suivant les règles de recyclage de votre région.
Débranchez l’adaptateur (transformateur) si une de ces conditions existe :
• Le câble, la prise ou le câble USB est abimé ou cassé.
• Le câble, la prise ou le câble USB sont exposés à la pluie, à du liquide ou une humidité
excessive.
• La boite de protection de l’adaptateur est abimée.
• Si vous pensez que l’adaptateur a besoin d’être réparé.
Débranchez le LEAPPAD ULTRA de l’adaptateur avant de le nettoyer.
• Pour nettoyer l’adaptateur, débranchez –le de la prise murale et nettoyez-le avec un
chiffon légèrement humide. Ne l’immergez pas dans l’eau, n’utilisez pas de savon
ou autres produits chimiques. Laissez le produit sécher avant de le réutiliser. Ne pas
brancher l’adaptateur si celui-ci est mouillé ou abimé.
• Ce jouet doit être utilisé avec un adaptateur pour jouets. Cet adaptateur CA doit
exclusivement être utilisé pour recharger la pile Li-Poly de la tablette LEAPPAD™
ULTRA LeapFrog (3.7Vdc, 4000mAh).
ATTENTION : NE PAS RECHARGER des piles pas rechargeables.
Pour l’Europe, ce jouet doit être utilisé avec un adaptateur pour jouets.
Caractéristiques électriques de l’adaptateur secteur : Voltage d’entrée 120 VAC, 60 Hz
(pour les États-Unis et Canada); 230 VAC, 50 Hz (Pour le Royaume-Uni et l’Europe); 240
VAC, 50Hz (pour l’Australie et la Nouvelle Zélande). Voltage de sortie : DC5V, 1.5A, 7.5VA.
Exposure to Radio Frequency Energy
LEAPPAD ULTRA contains a radio transmitter and receiver. When powered ON, LEAPPAD
ULTRA sends and receives radio frequency (RF) energy through its internal antenna. The
exposure requirements use units of measurement termed SAR (specific absorption rate).
LEAPPAD ULTRA has been tested and found to meet the SAR exposure requirements for
Wi-Fi operation as established by FCC, IC, and European Union guidelines.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications to this unit not expressly approved by LeapFrog could
void the EMC and wireless compliance and void the user’s authority to operate the equip-
ment. This product demonstrated EMC compliance using compliant peripheral devices
and shielded cables between system components. It is important that you use compliant
peripheral devices and shielded cables to reduce the possibility of causing interference to
radios, televisions, and other electronic devices.
USB Cable The USB cable provided with this product complies with FCC and other regula-
tory Emission limits. If using other than the provided USB cable, please note that in order
not to exceed FCC and other regulatory emissions limits, a shielded cable must be used.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. this device may not cause interference, and
2. this device must accept any interference, including interference that may cause unde-
sired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
The highest SAR value as reported to the authorities for this tablet PC model when tested
for use against the body is 0.72 W/kg.
The tablet PC has been tested when positioned at 0 mm from the body without any metal
parts in the vicinity of the tablet PC or when properly used with an appropriate LeapFrog
Accessory.
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003. The IC term stands for
“Industry Canada” followed by the certification number and all the “IC: 4810A-33200”
signifies is that the equipment meet the Radio Standard Specification RSS-210. The IC
certification number is located on the back of the enclosure.
Cet appareil numérique de la classe B est conforme à la norme ICES-003 du Canada.
Le terme IC signifie “Industrie Canada” et est. suivi du numéro de les certification “IC:
4810A-33200” signifient que l’équipement répond aux spécifi cations de la norme Radio
RSS-210. Le numéro de certification IC est situé à l’arrière de l’enceinte.
European Community Compliance Statement
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council
Recommendation of 12 July 1999 on the limitation of exposure of the general public to
electromagnetic fields (0–300 GHz).
This wireless device complies with the R&TTE Directive.
EU Declaration of Conformity
LeapFrog Enterprises, Inc., hereby declares that this Wi-Fi device is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
LeapFrog Enterprises, Inc, déclare que ce produit Wi-Fi est conforme aux règles essenti-
elles requises et autres provisions de la Directive 1999/5/EC.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should revert to
normal operation when the interference stops. If not, it may become necessary to turn the
power OFF and then back ON.
In the unlikely event of an electrostatic discharge, the unit may malfunction and lose
memory, requiring the user to reset the device by turning the power OFF and then back ON.
Recycling
For information on how this product might be recycled, visit www.leapfrog.com/recycle or
call (800) 701-5327.
Copyrighted Sofware
Certain software included in this product contains copyrighted software that is licensed
under the General Public License (GPL). A copy of that license is included below in this
document. Anyone may obtain from us the complete corresponding source code for the
software covered by the GPL for a period of three years after our last shipment of this
product by contacting LeapFrog customer service at [email protected].
Please write “GPL source code for LeapPad Ultra” in the subject line of your email.
We reserve the right to charge a reasonable fee to cover the costs of shipping and the
physical media on which the source code is loaded.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
PREAMBLE
The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share and change free software—to make sure the software is free for all
its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose
authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License
instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge
for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use
pieces of it in new free programs and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example,
if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You
must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission
to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone
understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its
recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original
authors’ reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be
distributed under the terms of this General Public License. The “Program,” below, refers to any such program or work, and a “work
based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing
the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term “modification”). Each licensee is addressed as “you.” Activities other than
copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program
is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (inde-
pendent of having been made by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all
the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of
this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option
offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy
and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does
not normally print such an announcement, your work based on the Program is not required to print an announcement.) These
requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and
can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to
those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which
is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other
licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation
of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or
distribution medium does not bring the other work under the scope of this License.
3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the
terms of Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of
Sections 1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of phys-
ically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under
the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information
you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution
and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete
source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used
to control compilation and installation of the executable. However, as a special exception, the source code distributed need not
include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so
on) of the operating system on which the executable runs, unless that component itself accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense or distribute the Program except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated
so long as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to
modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this
License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license
from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose
any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance
by third parties to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent
issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this
License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your
obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at
all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies
directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from
distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the
purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such
claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is imple-
mented by public license practices. Many people have made generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is
willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to
make thoroughly clear what is believed to be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces,
the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation
excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this
License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such
new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each
version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it
and “any later version”, you have the option of following the terms and conditions either of that version or of any later version
published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose
any version ever published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to
the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software
Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT
PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM
PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR
ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE
OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INAC-
CURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TM & © 2013 LeapFrog Enterprises, Inc. All rights reserved.
leapfrog.com/leappad
Recommended for children ages 4-9 years.
Convient aux enfants de 4 à 9 ans.
Model: LEAPPAD ULTRA
Model: 33200/33300/83333/83334/83335/83336/83337/83338
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
Item numbers: 33200/33300/83333/83334/83335/83336/83337/83338
Part Number: 605-11951-A
Certification and Compliance
U.S. Model: 33200 FCC ID: QDX33200
Canada Model: 33200 IC ID: 4810A-33200
Meets ICES 003
E.U.
0700
NB Number
-
1
-
2
-
3
-
4
-
5
-
6
LeapFrog 33300 LeapPad Ultra Manual And Instructions
- Taper
- Manual And Instructions
- Ce manuel convient également à
dans d''autres langues
- English: LeapFrog 33300 LeapPad Ultra
Documents connexes
-
LeapFrog LEAPPAD Platinum 31565 Mode d'emploi
-
-
-
-
LeapFrog 80-602210 Mode d'emploi
-
-
-
-
-
