Pioneer MVH-S110UBW Manuel utilisateur

English Français Italiano Español Deutsch Nederlands

DIGITAL MEDIA RECEIVER

RECEPTEUR NUMERIQUE MULTIMEDIA

RICEVITORE MULTIMEDIALE DIGITALE

RECEPTOR DIGITAL DE MEDIOS

DIGITALER MEDIA RECEIVER

DIGITALE MEDIA-RECEIVER

MVH-S110UI

MVH-S110UIG

MVH-S11UI

MVH-S110UB

MVH-S110UBG

MVH-S110UBA

MVH-S110UBW

Operation Manual

Mode d’emploi

Manuale d’istruzioni

Manual de instrucciones

Bedienungsanleitung

Bedieningshandleiding

- 2 -

English

Getting Started........................................................................................ 3

Radio.......................................................................................................... 6

USB/iPod®/AUX ........................................................................................ 8

App Mode .............................................................................................. 11

Spotify® .................................................................................................. 12

Using Pioneer ARC APP ....................................................................... 13

Settings .................................................................................................. 15

FUNCTION settings ............................................................................... 15

AUDIO settings ...................................................................................... 17

SYSTEM settings.................................................................................... 18

ILLUMINATION settings........................................................................ 20

Additional Information ....................................................................... 21

About this manual:

• In the following instructions, a USB memory or USB audio player are referred to as

“USB device”.

• In this manual, iPod and iPhone® are referred to as “iPod”.

Table of Contents

- 3 -- 3 -

English

MVH-S110UI/S110UIG/S11UI/S110UB/S110UBG/S110UBA/

S110UBW

Frequently used operations

Getting Started

Basic operation

Purpose Operation

Turn on the power* Press SRC/OFF to turn on the power.

Press and hold SRC/OFF to turn off the

power.

Adjust the volume Turn the M.C. dial.

Select a source Press SRC/OFF repeatedly.

Change the display information Press DISP repeatedly.

Return to the previous display/list Press BAND/.

Return to the normal display from the menu Press and hold BAND/.

Boost the bass level Press BASS.

• You can select the bass level in [BASS

BOOST] (page 18).

SRC (source)/OFF

Detach button

Display window

M.C. (multi-control) dial

BAND/

USB port

AUX input jack (3.5 mm stereo jack)

DISP (display)

BASS

- 4 -

English

* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal,

the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the

source off.

Display indication

Detach the front panel to prevent theft. Remove any cables and devices attached to the

front panel and turn off the unit before detaching it.

Important

• Avoid subjecting the front panel to excessive shock.

• Keep the front panel out of direct sunlight and high temperatures.

• Always store the detached front panel in a protective case or bag.

When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the

display.

1 Press the M.C. dial.

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when the BASS button is pressed and held.

Appears when the local seek tuning function is set (page 16).

Appears when a traffic program is received.

Appears when the TA (traffic announcements) function is set (page 16).

Appears when the sound retriever function is set (page 17).

Appears when the iPod control function is set (page 10).

Detaching the front panel

Setup menu

Detach Attach

- 5 -- 5 -

English

The setup menu disappears after 30 seconds of no operation. If you prefer not to set

at this time, turn the M.C. dial to select [NO], then press to confirm.

2 Turn the M.C. dial to select the options, then press to confirm.

To proceed to the next menu option, you need to confirm your selection.

3 [QUIT :YES] appears when all the settings have been made.

To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO],

then press to confirm.

4 Press the M.C. dial to confirm the settings.

NOTES

• You can cancel the menu setting by pressing SRC/OFF.

• These settings can be made at any time from the SYSTEM settings (page 18) and INITIAL settings

(page 5).

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.

4 Turn the M.C. dial to select [YES], then press to confirm.

1 Press and hold SRC/OFF until the unit turns off.

2 Press and hold SRC/OFF to display the main menu.

3 Turn the M.C. dial to select [INITIAL], then press to confirm.

4 Turn the M.C. dial to select an option, then press to confirm.

Menu Item Description

LANGUAGE Select the language to display the text information from a

compressed audio file.

[ENG](English),

[РУС](Russian),

[TUR](Turkish)

CLOCK SET Set the clock.

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

Canceling the demonstration display (DEMO OFF)

INITIAL settings

- 6 -

English

NOTE

The options vary depending on the unit.

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the

Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS

(radio data system) function only works in areas that broadcast RDS signals for FM

stations.

1 Press SRC/OFF to select [RADIO].

2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW].

Menu Item Description

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

SP-P/O MODE Select when there is a full-range speaker connected to the rear

speaker output leads and there is a subwoofer connected to the

RCA output.

[REAR/SUB.W]

[SUB.W/SUB.W] Select when there is a passive subwoofer connected directly to

the rear speaker output leads and there is a subwoofer

connected to the RCA output.

[REAR/REAR] Select when there are full-range speakers connected to the rear

speaker output leads and RCA output. If there is a full-range

speaker connected to the rear speaker output leads, and the

RCA output is not used, you may select either [REAR/SUB.W] or

[REAR/REAR].

S/W UPDATE Select to confirm the latest system information on the unit.

[SYSTEM INFO]

[SYSTEM UPDATE] Select to update the unit to the latest software and initialize the

unit settings. For details on the latest software and updating,

visit our website.

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

restarted automatically.

(Some of the settings may be retained even after resetting the

unit.)

[YES], [NO]

Radio

Receiving preset stations

- 7 -- 7 -

English

3 Press a number button (1/ to 6/).

TIP

The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the

FUNCTION settings (page 16).

The six strongest stations are stored on the number buttons (1/ to 6/).

1 After selecting the band, press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

3 Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1

After selecting the band, press / to select a station.

Press and hold / then release to seek an available station. Scanning stops

when the unit receives a station. To cancel seek tuning, press / .

NOTE

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 16).

To store stations manually

1

While receiving the station you want to store, press and hold one of the number

buttons (1/ to 6/ ) until it stops flashing.

The unit searches for a station by PTY (program type) information.

1 Press and hold BASS during FM reception.

2 Turn the M.C. dial to select a program type from [NEWS/INFO], [POPULAR],

[CLASSICS] or [OTHERS].

3 Press the M.C. dial.

The unit begins to search for a station. When it is found, its program service name is

displayed.

NOTES

• To cancel the search, press the M.C. dial.

• The program of some stations may differ from that indicated by the transmitted PTY.

Best stations memory (BSM)

Using PTY functions

- 8 -

English

• If no station is broadcasting the type of program you searched for, [NOT FOUND] is displayed for

about two seconds and then the tuner returns to the original station.

NOTE

iPod function is not available for MVH-S110UB/S110UBG/S110UBA/S110UBW.

Disconnect headphones from the device before connecting it to the unit.

USB devices (including Android™)/iPod

1

Open the USB port cover.

2 Plug in the USB device/iPod using an appropriate cable.

NOTE

To automatically switch to [USB] source when a USB device/iPod is connected to the unit, set [USB

AUTO] to [ON] in the SYSTEM settings (page 19).

CAUTION

Use a USB cable (sold separately) to connect the USB device as any device connected directly to the

unit will protrude out from the unit, which could be dangerous.

Before removing the device, stop playback.

AOA connections

For details on AOA connection, see page 14.

MTP connection

A device installed with Android OS 4.0 or most of later versions can be connected to the unit via MTP,

using the cable supplied with the device. However, depending on the connected device, OS version or

the numbers of the files in the device, audio files/songs may not be able to be played back via MTP.

Note that MTP connection is not compatible with WAV and FLAC file formats.

NOTE

If you use an MTP connection, [ANDROID WIRED] needs to be set to [MEMORY] in the SYSTEM settings

(page 19).

AUX

1

Insert the stereo mini plug into the AUX input jack.

2 Press SRC/OFF to select [AUX] as the source.

USB/iPod®/AUX

Playing back

- 9 -- 9 -

English

NOTE

If [AUX] is set to [OFF] in the SYSTEM settings, [AUX] cannot be selected as a source (page 19).

You can make various adjustments in the FUNCTION settings (page 15).

Note that the following operations do not work for an AUX device. To operate an AUX

device, use the device itself.

Operations

Purpose Operation

Select a folder/album*1 Press 1/ or 2/.

Select a track/song (chapter) Press or .

Fast forward or reverse*2 Press and hold or .

Search for a file from a list 1 Press and hold BASS to display the list.

2 Turn the M.C. dial to select the desired

file (folder) name or category, then press

to confirm.

3 Turn the M.C. dial to select the desired

file, then press to confirm.

Playback starts.

View a list of the files in the selected folder/

category*1

Press the M.C. dial when a folder/category

is selected.

Play a song in the selected folder/

category*1

Press and hold the M.C. dial when a folder/

category is selected.

Alphabetical search (iPod only) 1 Press and hold BASS to display the list.

2 Turn the M.C. dial to select the desired

category list, then press and hold BASS

to enter the alphabetical search mode.

(Turning the M.C. dial twice also enters

the alphabetical search mode.)

3 Turn the M.C. dial to select a letter, then

press to display the alphabetical list.

To cancel alphabetical search, press BAND/

.

Repeat play Press 6/.

Random/shuffle play Press 5/.

Shuffle all play (iPod only) Press and hold 5/.

Pause/resume playback Press 4/PAUSE.

- 10 -

English

*1 Compressed audio files only

*2 When you use the fast forward or reverse function while playing a VBR file, the playback time may

be not correct.

Link play mode

You can access songs based on the artist, album, or genre currently playing.

1 While listening to a song, press and hold 4/PAUSE to enter the link play mode.

2 Turn the M.C. dial to select the mode ([ARTIST], [ALBUM], [GENRE]), then press to

confirm.

The selected song/album will be played after the currently playing song.

NOTE

The selected song/album may be canceled if you use functions other than those from the link play

mode (e.g. fast forward and reverse).

iPod control

You can control the unit via a connected iPod.

The following iPod models are not compatible with this function.

– iPod nano 1st generation, iPod with video

1 Press BAND/ during playback, then select the control mode.

[CONTROL iPod]: The unit’s iPod function can be operated from the connected iPod.

[CONTROL AUDIO]: The unit’s iPod function can only be operated by the buttons on

the unit or supplied remote control. In this mode, the connected iPod cannot be

turned on or off.

NOTES

• Pressing iPod can also switch the control mode (only for MVH-S110UI/S11UI/S110UIG).

• Switching the control mode to [CONTROL iPod] pauses song playback. Use the connected iPod to

resume playback.

• The following operations are still accessible from the unit, even if the control mode is set to

[CONTROL iPod].

Sound retriever Press 3/S.Rtrv.

[1]: Effective for low compression rates

[2]: Effective for high compression rates

Return to root folder (USB only)*1 Press and hold 1/.

Change drives in USB device

(Devices that support the USB mass storage

device class protocol only)

Press BAND/.

Useful functions for iPod

Purpose Operation

- 11 -- 11 -

English

– Pause, fast forward/reverse, song/chapter selection

• The volume can only be adjusted from the unit.

(APP mode is not available for MVH-S110UB/S110UBG/S110UBA/S110UBW.)

You can enjoy listening to an application on an iPhone via the unit. In some cases, you

can control an application by using the unit.

For details on compatible devices, visit our website.

Important

Use of third party apps may involve or require the provision of personally identifiable information,

whether through the creation of a user account or otherwise, and for certain applications, the provision

of geolocation data.

ALL THIRD PARTY APPS ARE THE SOLE RESPONSIBILITY OF THE PROVIDERS, INCLUDING WITHOUT

LIMITATION COLLECTION AND SECURITY OF USER DATA AND PRIVACY PRACTICES. BY ACCESSING

THIRD PARTY APPS, YOU AGREE TO REVIEW THE TERMS OF SERVICE AND PRIVACY POLICIES OF THE

PROVIDERS. IF YOU DO NOT AGREE WITH THE TERMS OR POLICIES OF ANY PROVIDER OR DO NOT

CONSENT TO THE USE OF GEOLOCATION DATA WHERE APPLICABLE, DO NOT USE THAT THIRD PARTY

APP.

For iPhone users

This function is compatible with iPhone and iPod touch® installed with iOS 5.0 or later.

NOTE

PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION

THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE

SOLE RESPONSIBILITY OF THE APP PROVIDER.

1 Connect this unit with the mobile device.

• iPhone via USB (page 8)

2 Press SRC/OFF to select [APP].

3 Operate the mobile device to start up the application.

Basic operations

You can make various adjustments in the FUNCTION settings (page 15).

App Mode

Playback of an application via the unit

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

- 12 -

English

(MVH-S110UI/S11UI/S110UIG is only compatible with Spotify installed on iPhone.)

Spotify is a music streaming distribution service not affiliated with Pioneer. More

information is available at http://www.spotify.com.

The Spotify application is available for compatible smartphones, please visit https://

support.spotify.com/ for the latest compatibility information.

To enjoy Spotify as you drive, first download the Spotify app to your iPhone. You can

download it on the iTunes App Store. Choose a free account or a paid Premium account,

either in the app or at spotify.com. A Premium account gives you more features, like

offline listening.

Important

• This product incorporates Spotify software which is subject to 3rd party licenses found here:

www.spotify.com/connect/third-party-licenses.

• For information on the countries and regions where Spotify can be used, take a look at https://

www.spotify.com/us/select-your-country/.

Update the firmware of the Spotify application to the latest version before use.

1 Connect this unit with the mobile device.

• iPhone via USB (page 8)

2 Press SRC/OFF to select [SPOTIFY].

3 Launch the Spotify application on the mobile device and start playback.

Basic operations

You can make various adjustments in the FUNCTION settings (page 15).

NOTE

The available operations may vary according to the type of contents (track/album/artist/playlist/radio)

you want to play.

Pause/resume playback Press BAND/.

Spotify®

Listening to Spotify

Purpose Operation

Skip a track Press or .

Purpose Operation

- 13 -- 13 -

English

NOTE

Some functions of Spotify may not be operated from the unit.

(Pioneer ARC APP for iPhone is not available for MVH-S110UB/S110UBG/S110UBA/

S110UBW.)

You can operate the unit from Pioneer ARC APP installed on an iPhone/Android device.

In some cases, you can control aspects of the application, such as source selection,

pause, etc., by using the unit.

For details on what operations are available on the application, see the application’s help

section.

WARNING

Do not attempt to operate the application while driving. Make sure to pull off the road and park your

vehicle in a safe location before attempting to use the controls on the application.

Search for a track from a list 1 Press and hold BASS to display the list.

2 Turn the M.C. dial to select the desired

category, then press to confirm.

3 Turn the M.C. dial to select the desired

file, then press to confirm.

Playback starts.

Pause/resume playback Press 4/PAUSE.

Thumbs Up (Only for radio) Press 1/.

Thumbs Down (Only for radio) Press 2/.

Random play (Only for track/album/artist/

playlist)

Press 5/.

Repeat play (Only for track/album/artist/

playlist)

Press 6/.

Start a radio channel based on the song

currently being played.

1 Press and hold 5/ to start a radio.

2 Press the M.C. dial.

• This function may not be available

depending on the selected song.

Store the information about the song

currently being played.

Remove the song information stored.

1 Press and hold 3/S.Rtrv.

[SAVE]/[UNSAVE] appears.

2 Press the M.C. dial.

Using Pioneer ARC APP

Purpose Operation

- 14 -

English

For iPhone users

This function is compatible with iPhones (iPhone 5 or later) and iPod touches installed

with iOS 8.0 or later.

You can download Pioneer ARC APP on iTunes App Store.

For Android device users

This function is compatible with devices that have Android OS 4.1 or later installed and

also support AOA (Android Open Accessory) 2.0.

You can download Pioneer ARC APP on Google Play™.

NOTE

Some Android devices connected via AOA 2.0 may not work properly or emit sounds due to their own

software design, regardless of the OS version.

When making a connection with an Android device

1

Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

3 Turn the M.C. dial to select [ANDROID WIRED], then press to confirm.

4 Turn the M.C. dial to select [APP CONTROL], then press to confirm.

5 Turn the M.C. dial to select [P.APP AUTO ON], then press to confirm.

6 Turn the M.C. dial to select [ON], then press to confirm.

7 Connect this unit with the Android device via USB.

Pioneer ARC APP on the Android device starts automatically.

NOTE

If Pioneer ARC APP has not been installed on your Android device yet, a message that prompts you

to install the application will appear on your Android device. Select [OFF] in [P.APP AUTO ON] to

clear the message (page 19).

When making a connection with an iPhone

1

Connect this unit with the iPhone via USB.

2 Press SRC/OFF to select any source.

3 Press and hold the M.C. dial.

Pioneer ARC APP on the iPhone starts.

NOTE

If the connection fails, launch Pioneer ARC APP on the iPhone.

Making a connection with Pioneer ARC APP

- 15 -- 15 -

English

1 Press SRC/OFF to select [ANDROID].

Basic operations

You can adjust various settings in the main menu.

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select one of the categories below, then press to confirm.

• FUNCTION settings (page 15)

• AUDIO settings (page 17)

• SYSTEM settings (page 18)

• ILLUMINATION settings (page 20)

3 Turn the M.C. dial to select the options, then press to confirm.

NOTES

• iPod-related menu items in the following tables are not available for MVH-S110UB/S110UBG/

S110UBA/S110UBW.

• APP mode-related menu items in the following tables are not available for MVH-S110UB/S110UBG/

S110UBA/S110UBW.

The menu items vary according to the source.

Listening to music on Android

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

Pause/resume playback Press 4/PAUSE.

Sound retriever Press 3/S.Rtrv.

[1]: Effective for low compression rates

[2]: Effective for high compression rates

Settings

FUNCTION settings

- 16 -

English

Menu Item Description

FM SETTING

[TALK], [STANDARD], [MUSIC] Match the sound quality level with the broadcast

signal conditions of the FM band signal.

(Available only when FM band is selected.)

BSM

Store the six strongest stations on the number

buttons (1/ to 6/ ) automatically.

REGIONAL

[ON], [OFF] Limit the reception to the specific regional

programs when AF (alternative frequencies

search) is selected. (Available only when FM

band is selected.)

LOCAL

FM: [OFF], [LV1], [LV2], [LV3], [LV4]

MW/LW: [OFF], [LV1], [LV2]

Restrict the tuning station according to the

signal strength.

TA

[ON], [OFF] Receive current traffic information if available.

(Available only when FM band is selected.)

AF

[ON], [OFF] Allow the unit to retune to a different frequency

providing the same station. (Available only when

FM band is selected.)

NEWS

[ON], [OFF] Interrupt the currently selected source with

news programs. (Available only when FM band is

selected.)

SEEK

[MAN], [PCH] Assign or buttons to seek the stations

one by one (manual tuning) or select a station

from the preset channels.

SAVE

Store the information about the song currently

being played to your music list on Spotify.

UNSAVE

Remove the song information stored in [SAVE].

- 17 -- 17 -

English

S.RTRV

[1] (effective for low compression

rates),

[2] (effective for high

compression rates),

[OFF]

Enhance compressed audio and restore rich

sound.

Not available when the FLAC file is played back.

AUDIO BOOK

[FASTER], [NORMAL], [SLOWER] Change the playback speed. (Not available when

[CONTROL iPod] is selected in the control mode.)

PAUSE

Pause or resume playback.

AUDIO settings

Menu Item Description

FADER*1

Adjust the front and rear speaker balance.

BALANCE

Adjust the left and right speaker balance.

EQ SETTING

[SUPER BASS], [POWERFUL],

[DYNAMIC], [NATURAL], [VOCAL],

[VIVID], [CUSTOM1], [CUSTOM2],

[FLAT]

Select an equalizer band and

level for further customising.

Equalizer band: [80HZ], [250HZ],

[800HZ], [2.5KHZ], [8KHZ]

Equalizer level: [+6] to [–6]

Select or customise the equalizer curve.

[CUSTOM1] can be set separately for each source.

However, each of the below combinations are set

to the same setting automatically.

• USB, iPod, ANDROID, SPOTIFY, and APP

(iPhone)

[CUSTOM2] is a shared setting used for all

sources.

You can also switch the equalizer by pressing

repeatedly (Only for MVH-S110UB/

S110UBG/S110UBA/S110UBW).

LOUDNESS

[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.

SUB.W*2

[NOR], [REV], [OFF] Select the subwoofer phase.

Menu Item Description

USB

iPod

- 18 -

English

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 6).

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 6).

*3 Not available when [OFF] is selected in [SUB.W].

You can also access to these menus when the unit is turned off.

SUB.W CTRL*2*3

Cut-off frequency: [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ],

[160HZ], [200HZ]

Output level: [–24] to [+6]

Slope level: [–12], [–24]

Only frequencies lower than those in the

selected range are output from the subwoofer.

BASS BOOST

[0] to [+6] Select the bass boost level.

HPF SETTING

Cut-off frequency: [OFF], [50HZ],

[63HZ], [80HZ], [100HZ], [125HZ],

[160HZ], [200HZ]

Slope level: [–12], [–24]

Only frequencies higher than the high-pass filter

(HPF) cutoff are output from the speakers.

SLA

[+4] to [–4] Adjust the volume level for each source except

FM.

Each of the below combinations are set to the

same setting automatically.

• USB, iPod, ANDROID, SPOTIFY, and APP

(iPhone)

SYSTEM settings

Menu Item Description

LANGUAGE

[ENG](English), [РУС](Russian),

[TUR](Turkish)

Select the language to display the text

information from a compressed audio file.

CLOCK SET

Set the clock (page 5).

12H/24H

[12H], [24H] Select the time notation.

Menu Item Description

- 19 -- 19 -

English

* [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once

the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may

continue to draw power from the battery if your vehicle’s ignition does not have an ACC (accessory)

position.

SCROLL SET

[ONCE], [LOOP], [OFF] Select the way to scroll the text in the display

window.

AUTO PI

[ON], [OFF] Search for a different station with the same

programming, even if using a preset station.

AUX

[ON], [OFF] Set to [ON] when using an auxiliary device

connected to the unit.

SPOTIFY

[ON], [OFF] Set to [ON] when using the Spotify function.

MUTE MODE (Only for MVH-S110UI/S11UI/S110UIG)

[MUTE], [20dB ATT], [10dB ATT] Mute or attenuate sound automatically when a

signal from equipment with a mute function is

received.

PW SAVE*

[ON], [OFF] Reduce the battery power consumption.

Turning on the source is the only operation

allowed when this function is on.

ANDROID WIRED

[MEMORY], [APP CONTROL] Select the appropriate connection method for an

Android device.

P. AP P AU TO O N

[ON], [OFF]

Select [ON] to automatically launch Pioneer ARC

APP when an Android device is connected to the

unit via AOA. (Not available when [MEMORY] is

selected in [ANDROID WIRED].)

USB AUTO

[ON], [OFF] Select [ON] to automatically switch to [USB]

source when a USB device/iPod is connected to

the unit.

Select [OFF] when a USB device/iPod is being

connected to the unit just for charging.

Menu Item Description

- 20 -

English

ILLUMINATION settings

Menu Item Description

DIM SETTING

[SYNC CLOCK], [MANUAL] Select the way to change the display brightness.

BRIGHTNESS

[1] to [10] Change the display brightness.

The available setting ranges differ depending on

[DIM SETTING].

La page est en cours de chargement...

Pioneer MVH-S110UBW Manuel utilisateur

Ce manuel convient également à

Pioneer MVH-S110UBW Manuel utilisateur

dans d''autres langues

Documents connexes