Planet IGS-1600T Manuel utilisateur

Marque: Planet

Modèle: IGS-1600T

Catégorie: Commutateurs réseau

Taper: Manuel utilisateur

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

1. Package Contents

Thank you for purchasing PLANET Industrial Multi-port

10/100/1000T Gigabit Ethernet Switch, IGS-1600T. In the following

sections, the term “Industrial Ethernet Switch” means the

IGS-1600T.

Open the box of the Industrial Ethernet Switch and carefully

unpack it. The box should contain the following items:

Industrial Ethernet Switch x 1 User’s Manual x 1

DIN-rail Kit RJ45 Dust Caps x 16 Wall-mount Kit

If any of these are missing or damaged, please contact your dealer

immediately; if possible, retain the carton including the original

packing material, and use them again to repack the product in case

there is a need to return it to us for repair.

2.2 LEDDenition:

 System

LED Color Function

P1 Green Lights to indicate power input 1 has power.

P2 Green Lights to indicate power input 2 has power.

Fault Red Lights to indicate that AC or DC power has

failed.

 Per 10/100/1000BASE-T Port

LED Color Function

1000

LNK/ACT Green

To indicate the link through that port is

successfully established at 1000Mbps.

To indicate that the switch is actively sending

or receiving data over that port.

10/100

LNK/ACT Amber

To indicate the port is successfully established

at 10/100Mbps.

To indicate that the Switch is actively sending

or receiving data over that port.

2.6 GroundingtheDevice

Users MUST complete grounding wired with a power cord adapter

or power supply source should be connected to a socket outlet with

an earthing connection; otherwise, a sudden lightning could cause

fatal damage to the device.

Fault

V1+ V2+

PWR2PWR1

Max. Fault Alarm Loading: 24V, 1A

DC Input: 12-48V , 1.5A max.

AC Input: 24V , 1A max.

1 2 3 4 5 6

Note

EMD (Lightning) DAMAGE IS NOT CONVERED UNDER

WARRANTY.

Note

LES DOMMAGES EMD (éclair) NE SONT PAS PRIS

SOUS GARANTIE.

1. Insert positive and negative DC power wires into contacts 1 and

2 for POWER 1, or contacts 5 and 6 for POWER 2.

Fault

V1+ V2+

PWR2PWR1

Max. Fault Alarm Loading: 24V, 1A

DC Input: 12-48V , 1.5A max.

AC Input: 24V , 1A max.

1 2 3 4 5 6

Wire Range Wire Type FW Torque In-lbs (N.m)

12-24 AWG Str/Sol Cu 25 (0.56)

2. This product is intended to be supplied with a UL-listed power

adapter or power source, rated 24V AC, 50/60Hz min. 1A or

12-48V DC, min. 1.5A, and Tma 75°C (max.).

3. Tighten the wire-clamp screws for preventing the wires from

loosening.

123456

Power 1 Fault Power 2

+ - + -

2.HardwareIntroduction

2.1 SwitchFrontPanel

The front panel of the Industrial Ethernet Switch consists of

Ethernet interfaces and LED indicators.

 Front View

IGS-1600T

FaultP2P1

ACT

1000 LNK

ACT

10/100 LNK

Figure1: IGS-1600T Front View

2.3 SwitchUpperPanel

The upper panel of the Industrial Ethernet Switch consists of one

terminal block connector within two power input and one relay

output.

Fault

V1+ V2+

PWR2PWR1

Max. Fault Alarm Loading: 24V, 1A

DC Input: 12-48V , 1.5A max.

AC Input: 24V , 1A max.

1 2 3 4 5 6

Figure2: IGS-1600T Top View

2.4 WiringthePowerInputs

The 6-contact terminal block connector on the top panel of

Industrial Ethernet Switch is used for two redundant power

inputs. Please follow the steps below to insert the power wire by

professionals.

Caution

When performing any of the procedures like inserting

the wires or tightening the wire-clamp screws, make

sure the power is OFF to prevent from getting an

electric shock.

Caution

Lorsque vous effectuez l’une des procédures telles que

l’insertion des fils ou le serrage des vis de serrage,

assurez-vous que l’alimentation est coupée pour éviter

tout choc électrique.

Note

1. The power input range is DC 12V ~ 48V and

supports AC 24V.

2. Use one power input when using AC 24V.

2.5 WiringtheFaultAlarmContact

The fault alarm contacts are in the middle of the terminal block

connector as the picture shows below. Inserting the wires, the

Industrial Ethernet Switch will detect the fault status of the power

failure and then forms an open circuit. The following illustration

shows an application example for wiring the fault alarm contacts.

Fault Alarm Contacts

The Fault Alarm Contacts are

energized (CLOSE) for normal

operation and will OPEN when

failure occurs

Fault

Insert the wires into the fault alarm contacts

Wire Range Wire Type FW Torque In-lbs (N.m)

12-24 AWG Str/Sol Cu 25 (0.56)

Alarm relay circuit accepts up to 24V AC, 1A.

3.Installation

This section describes the functionalities of the Industrial Ethernet

Switch’s components and guides you to installing it on the DIN rail

and wall. Please read this chapter completely before continuing.

Note

This following pictures show how to install the device.

However, the device in the picture is not IGS-1600T.

3.1 DIN-railMountingInstallation

3.2 Wall-mountPlateMounting

Mount on product or wall (Screw size and quantity: 4mm (L),

3mm (dia.) and 4pcs); DIN-rail mount on product (Screw size and

quantity: 4mm (L), 3mm (dia.) and 3pcs)

- 9 -

- 10 -

- 11 -

- 12 - - 13 - - 14 -

4.3 SideWall-mountPlateMounting

Caution

You must use the screws supplied with the wall-

mounting brackets. Damage caused to the parts by

using incorrect screws would invalidate your warranty.

Attention

Vous devez utiliser les vis fournies avec les supports

muraux. Les dommages causés aux pièces par

l’utilisation de vis incorrectes invalideraient votre

garantie.

Dimensions

(W x D x H) 66 x 107 x 152 mm

Weight 743g

Power Requirements Dual DC 12~48V, AC 24V

Power Consumption

DC input:

Max. 3.4 watts/11.6BTU (System on)

Max. 8.7 watts/29.7BTU (Full loading)

AC input:

Max. 5 watts/17BTU (System on)

Max. 13.99 watts/47.8BTU (Full loading)

Standards Conformance

Regulatory

Compliance FCC Part 15 Class A, CE

Stability Testing

IEC60068-2-32 (free fall)

IEC60068-2-27 (shock)

IEC60068-2-6 (vibration)

Standards

Compliance

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3x ow control and back pressure

IEEE 802.1p Class of Service

IEEE 802.3az Energy Ecient Ethernet (EEE)

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3ab 1000BASE-T

IEEE 802.3x ow control and back pressure

IEEE 802.1p Class of Service

IEEE 802.3az Energy Ecient Ethernet (EEE)

4.ProductSpecications

Product IGS-1600T

Hardware Specications

Gigabit Ethernet

Copper Ports

16 10/100/1000BASE-T RJ45 auto-MDI/

MDI-X ports

Switch Architecture Store-and-Forward

Switch Fabric 32Gbps (non-blocking)

Throughput

(packet per second) 23.81Mpps@ 64 bytes

Address Table 8K entries, automatic source address

learning and aging

Shared Data Buer 4.1Mbits

Flow Control IEEE 802.3x pause frame for full duplex

Back pressure for half duplex

ESD Protection 6KV DC

Enclosure IP30 metal case

Installation DIN-rail kit and wall-mount kit

Connector

Removable 6-pin terminal block for power

input

Pin 1/2 for Power 1, Pin 3/4 for fault alarm,

Pin 5/6 for Power 2

Alarm One relay output for power failure. Alarm

relay current carry ability: 1A @ 24V DC

Environment

Operating

Temperature -40 ~ 75 degrees C

Storage

Temperature -40 ~ 85 degrees C

Humidity 5 ~ 95% (non-condensing)

5.CustomerSupport

Thank you for purchasing PLANET products. You can browse

our online FAQ resource at the PLANET Web site rst to check if

it could solve your issue. If you need more support information,

please contact PLANET support team.

PLANET online FAQs:

http://www.planet.com.tw/en/support/faq

Switch support team mail address:

[email protected]

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp.

All other trademarks belong to their respective owners.

FCCWarning

This equipment has been tested and found to comply with the

regulations for a Class A digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with this user’s guide, may cause harmful

interference to radio communications. Operation of this equipment

in a residential area is likely to cause harmful interference, in which

case the user will be required to correct the interference at his own

expense.

AvertissementdelaFCC

Cet équipement a été testé et jugé conforme à la réglementation

pour un appareil numérique de classe A, conformément à la partie

15 des règles de la FCC. Ces limites sont conçues pour fournir une

protection raisonnable contre les interférences nuisibles lorsque

l’équipement est utilisé dans un environnement commercial.

Cet équipement génère, utilise et peut émettre de l’énergie

radiofréquence et, s’il n’est pas installé et utilisé conformément

au présent guide de l’utilisateur, peut causer des interférences

nuisibles aux communications radio. Le fonctionnement de ces

équipements dans une zone résidentielle est susceptible de

provoquer des interférences préjudiciables, auquel cas l’utilisateur

sera tenu de corriger les interférences à ses propres frais.

CEMarkWarning

This is a Class A product. In a domestic environment, this product

may cause radio interference, in which case the user may be

required to take adequate measures.

This equipment is compliant with Class A of CISPR 32. In a

residential environment this equipment may cause radio interference.

AvertissementdemarquageCE

Il s’agit d’un produit de classe A. Dans un environnement

domestique, ce produit peut provoquer des interférences radio,

auquel cas l’utilisateur peut être tenu de prendre des mesures

adéquates.

Cet équipement est conforme à la classe A du CISPR 32. Dans

un environnement résidentiel, cet équipement peut causer des

interférences radio.

WEEEWarning

To avoid the potential eects on the environment and

human health as a result of the presence of hazardous

substances in electrical and electronic equipment, end users

of electrical and electronic equipment should understand

the meaning of the crossed-out wheeled bin symbol. Do not

dispose of WEEE as unsorted municipal waste and have to collect

such WEEE separately.

AvertissementWEEE

An d’éviter les eets potentiels sur l’environnement et la

santé humaine résultant de la présence de substances

dangereuses dans les équipements électriques et

électroniques, les utilisateurs naux d’équipements

électriques et électroniques devraient comprendre la signication du

symbole du bac à roulettes barré. Ne jetez pas les WEEE en tant

que déchets municipaux non triés et devez les collecter

séparément.

Planet IGS-1600T Manuel utilisateur

Marque: Planet

Modèle: IGS-1600T

Catégorie: Commutateurs réseau

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Planet IGS-1600T User manual