Whirlpool WOD51ES4EB Mode d'emploi

Catégorie
Cuisinières
Taper
Mode d'emploi
THANK YOU for purchasing this high-quality product. Register your new oven at www.whirlpool.com. In Canada, register your
oven at www.whirlpool.ca.
For future reference, please make a note of your product model and serial numbers. These can be located on lower right-hand side
of the oven frame inside the oven door.
Model Number __________________________________________ Serial Number ___________________________________________
Para una versión de estas instrucciones en español, visite www.whirlpool.com.
Deberá tener los números de modelo y serie. Se encuentran en el lado inferior derecho del marco del horno, dentro de la puerta.
BUILT-IN ELECTRIC
DOUBLE OVEN
USER INSTRUCTIONS
Table of Contents
OVEN SAFETY .........................................................................................2
FEATURE GUIDE .....................................................................................3
OVEN USE ................................................................................................4
Electronic Oven Controls......................................................................4
Hold Warm ............................................................................................6
Sabbath Mode ......................................................................................6
Aluminum Foil........................................................................................6
Positioning Racks and Bakeware.........................................................6
Oven Vent(s)..........................................................................................7
Baking and Roasting.............................................................................7
Broiling ..................................................................................................8
Cook Time.............................................................................................8
OVEN CARE .............................................................................................9
Self-Cleaning Cycle...............................................................................9
General Cleaning.................................................................................10
Oven Lights .........................................................................................10
PROBLEM SOLVER...............................................................................10
ACCESSORIES ......................................................................................11
WARRANTY............................................................................................12
W10692590B
2
OVEN SAFETY
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the oven, follow
basic precautions, including the following:
Proper Installation – Be sure the oven is properly installed
and grounded by a qualified technician.
Never Use the Oven for Warming or Heating the Room.
Do Not Leave Children Alone – Children should not be left
alone or unattended in area where oven is in use. They
should never be allowed to sit or stand on any part of the
oven.
Wear Proper Apparel – Loose-fitting or hanging garments
should never be worn while using the oven.
User Servicing – Do not repair or replace any part of the
oven unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
Storage in Oven – Flammable materials should not be
stored in an oven.
Do Not Use Water on Grease Fires – Smother fire or flame
or use dry chemical or foam-type extinguisher.
Use Only Dry Potholders – Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
Use Care When Opening Door – Let hot air or steam
escape before removing or replacing food.
Do Not Heat Unopened Food Containers – Build-up of
pressure may cause container to burst and result in injury.
Keep Oven Vent Ducts Unobstructed.
Placement of Oven Racks – Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN – Heating elements may be hot
even though they are dark in color. Interior surfaces of an
oven become hot enough to cause burns. During and after
use, do not touch, or let clothing or other flammable
materials contact heating elements or interior surfaces of
oven until they have had sufficient time to cool. Other
surfaces of the oven may become hot enough to cause
burns – among these surfaces are oven vent openings and
surfaces near these openings, oven doors, and windows of
oven doors.
For self-cleaning ovens:
Do Not Clean Gasket – The gasket is essential for a good
seal. Care should be taken not to rub, damage, or move
the gasket.
Do Not Use Oven Cleaners – No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
Clean Only Parts Listed in Manual.
Before Self-Cleaning the Oven – Remove broiler pan and
other utensils.
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
3
FEATURE GUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked
Questions (FAQs) section of our website at www.whirlpool.com for more detailed instructions. In Canada, reference the Customer Service
section at www.whirlpool.ca.
KEYPAD FEATURE INSTRUCTIONS
SETTINGS/
CLOCK
Clock This clock can use a 12- or 24-hour cycle. See “Electronic Oven Controls” section.
1. Press SETTINGS/CLOCK until “Clock” is displayed.
2. Press the number keypads to set the time of day.
3. Press START.
SETTINGS/
CLOCK
Oven use
functions
Enables you to personalize the audible tones and oven operation to suit your needs. See the
“Oven Use” section.
Oven Light Oven cavity light While the oven door(s) are closed, press the Oven Light keypad to turn the lights On and Off.
The oven lights will come On when an oven door is opened.
TIMER SET/OFF Oven timer The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press TIMER SET/OFF.
2. Press the number keypads to set the length of time in hr-min. Leading zeros do not have to
be entered. For example, for 2 minutes, enter “2.”
3. Press TIMER SET/OFF to begin the countdown. If enabled, timer tone(s) will sound at the
end of countdown.
4. Press TIMER SET/OFF to cancel the Timer and return to the time of day. Do not press the
Cancel keypad because the oven will turn off.
START Cooking start The Start keypad begins any oven function. If Start is not pressed within 2 minutes after
pressing a keypad, the function is canceled and the time of day is displayed.
CANCEL Oven function The Cancel keypad stops any oven function except the Clock, Timer, and Control Lock in the
selected oven.
BAKE Baking and
roasting
1. Press BAKE for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START for the selected oven.
4. To change the temperature when one oven is in use, repeat steps 2 and 3. To change the
temperature when two ovens are in use, press “1” for the upper oven or press “2” for the
lower oven, and then repeat steps 2 and 3.
5. Press CANCEL for the selected oven when finished.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
4
OVEN USE
Odors and smoke are normal when the oven is used the first few
times or when it is heavily soiled.
IMPORTANT: The health of some birds is extremely sensitive to
the
fumes given off. Exposure to the fumes may result in death
to
certain birds. Always move birds to another closed and well-
ventilated room.
Electronic Oven Controls
Control Display
The display will light up when first powered up or after a power
loss. When oven is not in use, the time of day is displayed.
Tones
Tones are audible signals, indicating the following:
One Tone
Valid keypad press.
Oven is preheated (long tone).
Kitchen timer (long tone with reminder tone every 60 seconds).
Function has been entered.
Three Tones
Invalid keypad press.
Four Tones
End of cycle (with reminder tone every 60 seconds).
Use the Settings/Clock keypad to change the tone settings.
Settings
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Settings/Clock
keypad
.
Use the Settings/Clock keypad to scroll through the features that
can be changed. Each press of the Settings/Clock keypad will
advance the display to the next setting. After selecting the feature
to be changed, the control will prompt you for the required input.
Details of all of the feature changes are explained in the following
sections.
Press CANCEL to exit Settings.
Fahrenheit and Celsius
The temperature is preset to Fahrenheit, but can be changed to
Celsius.
1. Press SETTINGS/CLOCK until “TEMP UNIT” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
BROIL Broiling 1. Press BROIL for the desired oven.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START for the selected oven, and then allow the oven to preheat for 2 minutes.
4. Position the cookware in the oven and close the door.
5. To change the temperature when one oven is in use, repeat steps 2 and 3. To change the
temperature when two ovens are in use, press “1” for the upper oven or press “2” for the
lower oven, and then repeat steps 2 and 3.
6. Press CANCEL for the selected oven when finished.
HOLD WARM Hold warm Food must be at serving temperature before placing it in the warmed oven.
1. Press HOLD WARM.
2. Press the number keypads to set the desired temperature. If the temperature entered is not
in the range of the temperatures allowed, the minimum or maximum allowed temperature
will be displayed. Enter a temperature in the allowable range.
3. Press START for the selected oven.
4. To change the temperature, repeat steps 2 and 3.
5. Press CANCEL for the selected oven when finished.
DELAY START Delayed start The Delay Start keypad is used to enter the starting time for an oven function with a delayed
start. Delay Start should not be used for foods such as breads and cakes because they may not
bake properly.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
COOK TIME Timed cooking Cook Time allows the oven to be set to turn on at a certain time of day, cook for a set length of
time, and/or shut off automatically.
To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.
CLEAN MODES
(Upper oven only)
Self-clean cycle See the “Self-Clean Cycle” section.
START LOWER
hold 3 sec.
Oven control
lockout
1. Check that the ovens and timers are off.
2. Press and hold START LOWER for 3 seconds.
3. If enabled, a tone will sound, and “CONTROL LOCKED” will be displayed.
4. Repeat to unlock. No keypads will function with the controls locked.
KEYPAD FEATURE INSTRUCTIONS
5
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones.
1. Press SETTINGS/CLOCK until “SOUND” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
Sound Volume
Sets the pitch of the tone to either high or low.
1. Press SETTINGS/CLOCK until “SOUND VOLUME” is
displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press SETTINGS/CLOCK until “END TONE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press SETTINGS/CLOCK until “KEYPRESS TONE” is
displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end of cycle tones.
1. Press SETTINGS/CLOCK until “REMINDER TONE” is
displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
12/24 Hour Clock
1. Press SETTINGS/CLOCK until “12/24 HOUR” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120V power connection and permits the control features to be
demonstrated without heating elements turning on. If this feature is
activated, the oven will not work.
1. Press SETTINGS/CLOCK until “DEMO MODE” is displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
12-Hour Shutoff
The oven control is set to automatically shut off the oven 12 hours
after the oven initiates a cook or clean function. This will not
interfere with any timed or delay cook functions.
1. Press SETTINGS/CLOCK until “12 HR AUTO OFF” is
displayed.
2. The current setting will be displayed.
3. Press the “1” keypad to adjust the setting.
4. Press CANCEL to exit and display the time of day.
Languages - Scrolling Display Text
Language options are English, Spanish and French.
1. Press SETTINGS/CLOCK until “LANGUAGE” is displayed.
2. The current setting will be displayed.
3. Press the number keypad as instructed by the scrolling
text
to select the new language.
4. Press CANCEL to exit and display the time of day.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature. Elements will cycle on and off as needed to provide
consistent temperature, but they may run slightly hot or cool at
any point in time due to this cycling. Most thermometers are slow
to react to temperature change and will not provide an accurate
reading due to this cycling.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed to Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press SETTINGS/CLOCK until “TEMP CALIB” is displayed.
2. The current setting will be displayed. Press the “1” keypad to
toggle between the upper and lower ovens.
3. Press START for the selected oven to select the choice
displayed in Step
2. Wait several seconds for the display to
change or press START for the selected oven, and then
continue with Step
4.
4. Press the “3” keypad to increase the temperature in 5°F (3°C)
increments, or press the “6” keypad to decrease the
temperature in 5°F (3°C) increments. The range is from -30°F to
+30°F (-18°C to +18°C).
5. Press START.
6. Press CANCEL for the selected oven to exit and display the
time of day.
6
Hold Warm
IIMPORTANT: Food must be at serving temperature before placing
it in the warmed oven. Food may be held up to 1 hour; however,
breads and casseroles may become too dry if left in the oven
during the Hold Warm function. For best results, cover food.
The Hold Warm feature allows hot cooked foods to stay at serving
temperature.
To Use:
1. Press HOLD WARM for the desired oven.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
NOTE: The temperature may be changed at any time by
pressing the number keypads to enter the desired temperature
and then START for the selected oven.
3. Press START for the selected oven.
4. Place food in the oven.
5. Press CANCEL for the selected oven when finished.
6. Remove food from the oven.
To Cancel Hold Warm:
1. Press CANCEL for the selected oven.
2. Remove food from oven.
Sabbath Mode
The Sabbath Mode sets the oven to remain on in a bake setting
until turned off.
When the Sabbath Mode is set, only the Bake cycle will operate. All
other cooking and cleaning cycles are disabled. No tones will
sound, and the displays will not indicate temperature changes.
When the oven door is opened or closed, the oven light will not turn
On or Off, and the heating elements will not turn On or Off
immediately.
To Enable Sabbath Mode Capability (One Time Only):
1. Press SETTINGS/CLOCK until “SABBATH” is displayed.
2. Press the “1” keypad. Sabbath Mode can be activated for
baking.
3. Press CANCEL to save the setting and exit to display the time
of day.
NOTE: To disable the Sabbath Mode, repeat steps 1 through 3
to change the status from “SABBATH ON” to “SABBATH OFF.”
To Activate Sabbath Mode:
1. Press BAKE for the desired oven.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
3. Press START for the selected oven.
For timed cooking in Sabbath Mode, press COOK TIME, and
then press the number keypads to set the desired cook time.
Press START for the selected oven.
4. (Optional) If Sabbath Mode is to be used for both ovens, repeat
steps 1 through 3 for the second oven.
5. Press SETTINGS/CLOCK. Three tones will sound. Then press
“7.” “SAb” will appear in the display.
To Adjust Temperature (when Sabbath Mode is running in only
one oven):
1. Press the number keypad as instructed by the scrolling text to
select the new temperature.
NOTE: The temperature adjustment will not appear on the
display, and no tones will sound. The scrolling text will be
shown on the display as it was before the keypad was pressed.
2. Press START for the selected oven.
To Adjust Temperature (when Sabbath Mode is running in both
ovens):
1. Press BAKE for the desired oven.
2. Press the number keypad as instructed by the scrolling text to
select the new temperature.
NOTE: The temperature adjustment will not appear on the
display, and no tones will sound. The scrolling text will be
shown on the display as it was before the keypad was pressed.
3. Press START for the selected oven.
To Deactivate Sabbath Mode:
Press SETTINGS/CLOCK, and then press “7” to return to regular
baking, or press CANCEL for the desired oven to turn off the
oven(s).
Aluminum Foil
IMPORTANT: To avoid permanent damage to the oven bottom
finish, do not line the oven bottom with any type of foil or liner.
For best cooking results, do not cover entire oven rack with foil
because air must be able to move freely.
Positioning Racks and Bakeware
IMPORTANT: To avoid permanent damage to the porcelain finish,
do not place food or bakeware directly on the oven door or bottom.
Racks
Position racks before turning on the oven.
Do not position racks with bakeware on them.
Make sure racks are level.
Place food so it will not rise into the broil element. Allow at least
¹⁄₂" (1.3 cm) between pans and the broil element.
To move a rack, pull it out to the stop position, raise the front edge,
and then lift it out. Use the following illustrations and charts as a
guide for positioning racks.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
7
Rack Positions
Broiling
Baking
Baking Layer Cakes on 1 Rack
Place the cakes on the rack as shown.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 4 for regular baking.
Baking Layer Cakes on 2 Racks
For best results when baking cakes on 2 racks, use rack positions
2 and 4 with the Bake function. Place the cakes on the racks as
shown.
Baking Cookies on 2 Racks
For best results when baking cookies on 2 racks, use rack
positions 2 and 4 with the Bake function.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow 2"
(5.0
cm) of space around bakeware and oven walls. Use the
following chart as a guide.
NOTE: Bakeware materials and color may affect results. Dark,
dull, non-stick or glass pans may require shorter baking times, in
contrast insulated or stainless steel pans may require longer
baking times. Follow bakeware manufacturer's recommendations.
Oven Vent(s)
The oven vent(s) should not be blocked or covered since they allow
the inlet of fresh air into the cooling system. Also, the bottom vent
should not be blocked or covered since it allows the inlet of fresh
air into the cooling system and the outlet of hot air from the cooling
system. Blocking or covering vents will cause poor air circulation,
affecting cooking, cleaning and cooling results.
Baking and Roasting
Preheating
When beginning a Bake cycle, the oven will begin preheating after
Start is pressed.
The oven will take approximately 13 to 19 minutes
to reach
350°F (177°C)
with all of the oven racks provided with your
oven inside the oven cavity. Higher temperatures will take longer to
preheat. The preheat cycle rapidly increases the oven temperature.
The actual oven temperature will go above your set temperature to
offset the heat lost when your oven door is opened to insert food.
This ensures that when you place your food in the oven, the oven
will begin at the proper temperature. Insert your food when the
preheat tone sounds. Do not open the door during preheat before
the tone sounds.
Oven Temperature
While in use, the oven elements will cycle On and Off as needed to
maintain a consistent temperature, but they may run slightly hot or
cool at any point in time due to this cycling. Opening the oven door
while in use will release the hot air and cool the oven which could
impact the cooking time and performance. It is recommended to
use the oven light to monitor cooking progress.
Before baking and roasting, position racks according to the
“Positioning Racks and Bakeware” section. When roasting, it is not
necessary to wait for the oven preheat cycle to end before putting
food in unless it is recommended in the recipe.
Food Rack Position
Broiled meats, poultry, fish 4
Broiling/searing meats, hamburgers,
steaks
5
Food Rack Position
Large roasts, roasted meats or poultry 1 or 2
Most baked goods, casseroles 2 or 3
Number
of Pan(s)
Position on Rack
1 Center of rack.
2 Side by side.
3 or 4 Refer to the previous illustration.
1
2
3
4
5
Single and Double Oven
A. Control panel
B. Oven vent
C. Single oven or upper double oven
G. Bottom vent
Double Oven
D. Upper oven
E. Oven vent
F. Lower oven
G. Bottom vent
E
D
F
B
A
C
G
8
Broiling
When broiling, preheat the oven for 2 minutes before putting food
in unless recommended otherwise in the recipe. Position food on
grid in a broiler pan, and then place it in the center of the oven rack.
Close the oven door to ensure proper broiling temperature.
NOTE: Odors and smoke are normal the first few times the oven is
used or if the oven is heavily soiled.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, fish
and poultry may cook better at lower broil settings. Place the food
in the upper or lower oven. Refer to the “Positioning Racks and
Bakeware” section for more information.
On lower settings, the broil element will cycle On and Off to
maintain the proper temperature.
For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
If you would like to purchase a broiler pan, one may be ordered.
Please refer to the “Accessories” section for more information.
Cook Time
To Set a Timed Cook:
1. Press the keypad for any cooking function except Broil or Hold
Warm.
2. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
3. Press COOK TIME.
4. Press the number keypads to enter the length of time to cook.
5. Press START for the selected oven. The display will count down
the time. When the time ends, the oven will shut off
automatically.
The temperature and/or time setting can be changed at any
time by repeating steps 2 through 5.
6. Press CANCEL for the selected oven to clear the display.
To Set a Delayed Timed Cook:
1. Press DELAY START.
2. Press the number “1” or “2” keypad to select the desired oven.
3. Press the number keypads to enter the number of hours and/or
minutes you want to delay the start time.
4. Press the keypad for any cooking function except Broil or Hold
Warm.
5. Press the number keypads to set the desired temperature. If
the temperature entered is not in the range of the temperatures
allowed, the minimum or maximum allowed temperature will be
displayed. Enter a temperature in the allowable range.
6. Press START for the selected oven or COOK TIME.
7. Press the number keypads to enter the length of time to cook.
8. Press START for the selected oven.
When the start time is reached, the oven will automatically turn On.
The temperature and/or time settings can be changed after the
delay countdown by repeating steps 1 through 7. When resetting
the time and temperature, it is necessary to press Start for the
selected oven between steps
4 and 5 to continue making changes.
When the set cook time ends, the oven will shut off automatically.
9. Press CANCEL for the selected oven to clear the display.
WARNING
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
9
OVEN CARE
Self-Cleaning Cycle
IMPORTANT: The health of some birds is extremely sensitive to the
fumes given off during the Self-Cleaning cycle. Exposure to the
fumes may result in death to certain birds. Always move birds to
another closed and well-ventilated room.
Keep the kitchen well-ventilated during the Self-Cleaning cycle to
help get rid of heat, odors and smoke.
Do not block the oven vent(s) during the Self-Cleaning cycle. Air
must be able to move freely. Depending on your model, see “Oven
Vent” or “Oven Vents” section.
Do not clean, rub, damage or move the oven door gasket.
Prepare Oven:
Remove the broiler pan, grid, cookware and bakeware, all
cooking utensils, oven racks and aluminum foil and, on some
models, the temperature probe from the oven.
Use a damp cloth to clean inside door edge and the 1½"
(38
mm) area around the inside oven cavity frame, being certain
not to move or bend the gasket.
Wipe out any loose soil to reduce smoke and avoid damage. At
high temperatures, foods react with porcelain. Staining,
etching, pitting or faint white spots can result. This will not
affect cooking performance.
IMPORTANT:
Oven temperature must be below 500°F (260°C) to program a
clean cycle.
The self-clean feature is only available in the upper oven.
How the Cycle Works
IMPORTANT: The heating and cooling of porcelain on steel in the
oven may result in discoloring, loss of gloss, hairline cracks and
popping sounds.
The Self-Cleaning cycle uses very high temperatures, burning soil
to a powdery ash.
Once the oven has completely cooled, remove ash with a damp
cloth. To avoid breaking the glass, do not apply a cool damp cloth
to the inner door glass before it has completely cooled.
The oven light will not work during the Self-Cleaning cycle.
To stop the Self-Cleaning cycle at anytime, press CANCEL UPPER.
If the temperature is too high, the oven door will remain locked.
When “LOCK” shows in the display, the door of the oven cannot be
opened. To avoid damage to the door, do not force the door open
when “LOCK” is displayed.
Before self-cleaning, make sure the door is completely closed or
the door will not lock and the Self-Cleaning cycle will not begin.
NOTE: 12 hours must pass before the next Self-Clean can begin.
The oven is preset for a 4-hour clean cycle; however, the time can
be changed. Suggested clean times are 3
hours for light soil and
between 4
hours and 5 hours for average to heavy soil.
Use the following chart as a guide to determine the desired
cleaning level.
To Self-Clean:
1. Close the oven door, and then press CLEAN MODES.
2. Choose the clean level desired by pressing the appropriate
number keypad as instructed by the scrolling text.
3. Press START UPPER.
The oven door will automatically lock.
When the Self-Clean cycle is complete and the oven cools, the
oven door will unlock.
4. When the oven is completely cooled, remove ash with a damp
cloth.
To Delay Start Self-Clean:
1. Close the oven door, and then press DELAY START.
2. Press the number keypads to enter the desired amount of time
by which you want to delay the start.
3. Press CLEAN MODES.
4. Choose the clean level desired by pressing the appropriate
number keypad as instructed by the scrolling text.
5. Press START UPPER.
The oven door will automatically lock.
When the Self-Clean cycle is complete and the oven cools, the
oven door will unlock.
6. When the oven is completely cooled, remove ash with a damp
cloth.
WARNING
Burn Hazard
Do not touch the oven during the Self-Cleaning cycle.
Keep children away from oven during
Self-Cleaning cycle.
Failure to follow these instructions can result in burns.
Cleaning Level Total Cleaning Time
(Includes a 30 Minute Cool Down Time)
1 (Quick) 3 hours
2 3 hours 20 minutes
3 3 hours 40 minutes
4 (reg) 4 hours
5 4 hours 30 minutes
6 (Maxi) 5 hours
10
General Cleaning
IMPORTANT: Before cleaning, make sure all controls are off and
the oven is cool. Always follow label instructions on cleaning
products. For additional information, you can visit the Frequently
Asked Questions (FAQs) section of our website at
www.whirlpool.com. In Canada, refer to the Customer Service
section at www.whirlpool.ca.
Soap, water and a soft cloth or sponge are suggested first unless
otherwise noted.
EXTERIOR PORCELAIN ENAMEL SURFACES (on some
models)
Food spills containing acids, such as vinegar and tomato, should
be cleaned as soon as the entire oven is cool. These spills may
affect the finish.
Cleaning Method:
Glass cleaner, mild liquid cleaner or nonabrasive scrubbing
pad:
Gently clean around the model/serial/rating plate because
scrubbing may remove numbers.
affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
STAINLESS STEEL (on some models)
NOTE: To avoid damage to stainless steel surfaces, do not use
soap-filled scouring pads, abrasive cleaners, steel-wool pads,
gritty washcloths or abrasive paper towels. Damage may occur to
stainless steel surfaces, even with one-time or limited use.
Cleaning Method:
Rub in direction of grain to avoid damaging.
affresh
®
Stainless Steel Cleaner Part Number W10355016:
See the “Accessories” section for more information.
METALLIC PAINT (on some models)
Do not use abrasive cleaners, cleaners with bleach, rust removers,
ammonia or sodium hydroxide (lye) because paint surface may
stain.
CONTROL PANEL AND OVEN DOOR EXTERIOR
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths or abrasive paper
towels.
Cleaning Method:
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
affresh
®
Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See the “Accessories” section for more information.
OVEN RACKS
Cleaning Method:
Steel-wool pad.
For racks that have discolored and are harder to slide, a light
coating of vegetable oil applied to the rack guides will help
them slide.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned after the oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Cleaning Method:
Self-Cleaning cycle:
See “Self-Cleaning Cycle” first.
Oven Lights
The oven lights are standard 25-watt appliance bulbs. Before
replacing, make sure the oven is cool and the controls are turned
Off.
To Replace:
1. Disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, and then bulb cover by turning clockwise.
5. Reconnect power.
PROBLEM SOLVER
First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, refer
to the warranty page in this manual and scan the code there with your mobile device, or visit http://www.whirlpool.com/product_help. In
Canada, visit http://www.whirlpool.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:
Whirlpool Brand Home Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022-2692
In Canada:
Whirlpool Brand Home Appliances
Customer eXperience Centre
200 - 6750 Century Ave.
Mississauga, Ontario L5N 0B7
Please include a daytime phone number in your correspondence.
PROBLEM POSSIBLE CAUSES AND/OR SOLUTIONS
Nothing will operate Oven isn’t wired properly - See the Installation Instructions.
Household fuse is blown, or a circuit breaker is tripped - Replace the fuse or reset the circuit breaker.
If the problem continues, call an electrician.
The control displays an F9 or F9 E0 error code - The electrical outlet in the home may be miswired.
Contact a qualified electrician to verify the electrical supply.
11
ACCESSORIES
For accessories in the U.S.A., you can visit our website at www.whirlpool.com or call us at 1-800-253-1301.
In Canada, visit our website at www.whirlpool.ca or call us at 1-800-807-6777.
Oven will not operate Delay Start is set - See the “Cook Time” section.
Control Lock is on - Press and hold START LOWER for 3 seconds to unlock.
Control is in Demo Mode - See the “Electronic Oven Controls” section. Demo Mode is used for display
models in a showroom.
Electronic oven control set incorrectly - See the “Electronic Oven Controls” section.
Oven temperature too high
or too low
Oven temperature needs adjustment - See “Oven Temperature Control” in the “Electronic Oven
Controls” section.
Display shows messages Power failure (display shows flashing time) - Press CANCEL UPPER to clear the display. On some
models, reset the clock if needed. See the “Settings/Clock” keypad feature in the “Feature Guide” section.
Error code (display shows letter followed by number) - Press CANCEL UPPER to clear the display.
See “Control Display” in the “Electronic Oven Controls” section. If it reappears, call for service. See the
“Warranty” section for contact information.
Clean cycle did not work
on all spills
Several cooking cycles between Clean cycles or spills on oven walls and doors - Run additional
Clean cycles. The affresh
®
Kitchen and Appliance Cleaner can be used for stubborn soils. See the
“Accessories” and “Self-Cleaning Cycle” sections for more information.
Oven cooking results not
what expected
The set temperature was incorrect - Double-check the recipe in a reliable cookbook.
Oven temperature needs adjustment - See “Oven Temperature Control” in the “Electronic Oven
Controls” section.
Oven was not preheated - See the “Baking and Roasting” section.
Racks were positioned improperly - See the “Positioning Racks and Bakeware” section.
Not enough air circulation around bakeware - See the “Positioning Racks and Bakeware” section.
Batter distributed unevenly in pan - Check that batter is level in the pan.
Darker browning of food caused by dull or dark bakeware - Lower the oven temperature 25°F (15°C)
or move rack to a higher position in the oven.
Lighter browning of food caused by shiny or light colored bakeware - Move rack to a lower position
in the oven.
Incorrect length of cooking time was used - Adjust cooking time.
Oven door was not closed - Be sure that the bakeware does not keep the door from closing.
Oven door was opened during cooking - Oven peeking releases oven heat and can result in longer
cooking times.
Rack is too close to bake burner, making baked items too brown on bottom - Move rack to higher
position in the oven.
Pie crusts browning too quickly - Use aluminum foil to cover the edge of the crust and/or reduce
baking temperature.
affresh
®
Stainless Steel Cleaning Wipes
(stainless steel models)
Order Part Number W10355049
affresh
®
Stainless Steel Cleaner
(stainless steel models)
Order Part Number W10355016
affresh
®
Kitchen and Appliance Cleaner
Order Part Number W10355010
Granite Cleaner and Polish
Order Part Number W10275756
Standard Flat Oven Rack
Order Part Number 4448716
Porcelain Broiler Pan and Grid
Order Part Number 4396923
PROBLEM POSSIBLE CAUSES AND/OR SOLUTIONS
12
11/14
WHIRLPOOL
®
MAJOR
APPLIANCE
LIMITED WARRANTY
ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS REQUIRED
TO OBTAIN WARRANTY SERVICE.
Please have the following information available when you call the
Customer eXperience Center:
Name, address and telephone number
Model number and serial number
A clear, detailed description of the problem
Proof of purchase including dealer or retailer name and address
IF YOU NEED SERVICE:
1. Before contacting us to arrange service, please determine whether your product requires repair. Some
questions can be addressed without service. Please take a few minutes to review the Troubleshooting or
Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional
resources, or visit www.whirlpool.com/product_help.
2. All warranty service is provided exclusively by our authorized Whirlpool Service Providers. In the U.S. and
Canada, direct all requests for warranty service to:
Whirlpool Customer eXperience Center
In the U.S.A., call 1-800-253-1301. In Canada, call 1-800-807-6777.
If outside the 50 United States or Canada, contact your authorized Whirlpool dealer to determine whether another warranty applies.
www.whirlpool.com/product_help
ONE YEAR LIMITED WARRANTY
WHAT IS COVERED WHAT IS NOT COVERED
For one year from the date of purchase, when this
major appliance is installed, operated and maintained
according to instructions attached to or furnished with
the product, Whirlpool Corporation or Whirlpool
Canada LP (hereafter “Whirlpool”) will pay for Factory
Specified Replacement Parts and repair labor to
correct defects in materials or workmanship that
existed when this major appliance was purchased, or
at its sole discretion replace the product. In the event
of product replacement, your appliance will be
warranted for the remaining term of the original unit's
warranty period.
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS
LIMITED WARRANTY SHALL BE PRODUCT REPAIR
AS PROVIDED HEREIN. Service must be provided by a
Whirlpool designated service company. This limited
warranty is valid only in the United States or Canada
and applies only when the major appliance is used in
the country in which it was purchased. This limited
warranty is effective from the date of original consumer
purchase. Proof of original purchase date is required to
obtain service under this limited warranty.
1. Commercial, non-residential, multiple-family use, or use inconsistent with published
user, operator or installation instructions.
2. In-home instruction on how to use your product.
3. Service to correct improper product maintenance or installation, installation not in
accordance with electrical or plumbing codes or correction of household electrical or
plumbing (i.e. house wiring, fuses or water inlet hoses).
4. Consumable parts (i.e. light bulbs, batteries, air or water filters, preservation
solutions, etc.).
5. Defects or damage caused by the use of non-genuine Whirlpool parts or accessories.
6. Conversion of products from natural gas or L.P. gas.
7. Damage from accident, misuse, abuse, fire, floods, acts of God or use with products
not approved by Whirlpool.
8. Repairs to parts or systems to correct product damage or defects caused by
unauthorized service, alteration or modification of the appliance.
9. Cosmetic damage including scratches, dents, chips, and other damage to the
appliance finishes unless such damage results from defects in materials and
workmanship and is reported to Whirlpool within 30 days.
10. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive
environments including but not limited to high salt concentrations, high moisture or
humidity or exposure to chemicals.
11. Food or medicine loss due to product failure.
12. Pick-up or delivery. This product is intended for in-home repair.
13. Travel or transportation expenses for service in remote locations where an authorized
Whirlpool servicer is not available.
14. Removal or reinstallation of inaccessible appliances or built-in fixtures (i.e. trim,
decorative panels, flooring, cabinetry, islands, countertops, drywall, etc.) that
interfere with servicing, removal or replacement of the product.
15. Service or parts for appliances with original model/serial numbers removed, altered
or not easily determined.
The cost of repair or replacement under these excluded circumstances shall be
borne by the customer.
DISCLAIMER OF IMPLIED WARRANTIES
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not allow
limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives you
specific legal rights, and you also may have other rights that vary from state to state or province to province.
DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY
Whirlpool makes no representations about the quality, durability, or need for service or repair of this major appliance other than the representations
contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with this major appliance,
you should ask Whirlpool or your retailer about buying an extended warranty.
LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. WHIRLPOOL
SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or limitation
of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and
you also may have other rights that vary from state to state or province to province.
13
MERCI d'avoir acheté ce produit de grande qualité. Enregistrer le four sur www.whirlpool.ca.
Pour référence ultérieure, consigner par écrit les numéros de modèle et de série de votre produit. Ces derniers peuvent se trouver
dans le coin inférieur droit du cadre du four, à l'intérieur de la porte du four.
Numéro de modèle_______________________________________ Numéro de série_________________________________________
Table des matières
SÉCURITÉ DU FOUR............................................................................ 14
GUIDE DES CARACTÉRISTIQUES ..................................................... 16
UTILISATION DU FOUR ....................................................................... 18
Commandes électroniques du four ................................................... 18
Maintien au chaud.............................................................................. 19
Mode Sabbat...................................................................................... 20
Papier d’aluminium............................................................................. 20
Positionnement des grilles et des ustensiles de cuisson au four...... 20
Évent(s) du four .................................................................................. 21
Cuisson au four et rôtissage .............................................................. 21
Cuisson au gril.................................................................................... 22
Durée de cuisson................................................................................ 22
ENTRETIEN DU FOUR.......................................................................... 23
Programme d’autonettoyage ............................................................. 23
Nettoyage général.............................................................................. 24
Lampes du four .................................................................................. 24
RÉSOLUTION DE PROBLÈMES.......................................................... 25
ACCESSOIRES...................................................................................... 26
GARANTIE ............................................................................................. 27
SÉCURITÉ DU FOUR
Risque possible de décès ou de blessure grave si vous ne
suivez pas immédiatement les instructions.
Risque possible de décès ou de blessure grave si vous
ne suivez pas les instructions.
Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et
ce qui peut se produire en cas de non-respect des instructions.
Votre sécurité et celle des autres est très importante.
Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de
toujours lire tous les messages de sécurité et de vous y conformer.
AVERTISSEMENT
DANGER
Voici le symbole d’alerte de sécurité.
Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous
et à d’autres.
Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou
“AVERTISSEMENT”. Ces mots signifient :
15
CONSERVEZ CES INSTRUCTIONS
IMPORTANTES INSTRUCTIONS DE SÉCURITÉ
AVERTISSEMENT : Pour réduire le risque d’incendie, de
choc électrique, de blessures corporelles ou de dommages
lors de l’utilisation du four, il convient d’observer certaines
précautions élémentaires dont les suivantes :
Installation appropriée – S’assurer que le four est
convenablement installé et relié à la terre par un technicien
qualifié.
Ne jamais utiliser le four pour chauffer ou réchauffer
une pièce.
Ne pas laisser les enfants seuls – Les enfants ne doivent
pas être laissés seuls ou sans surveillance dans la pièce
où le four est en service. Ne jamais laisser les enfants
s’asseoir ou se tenir sur une partie quelconque du four.
Porter des vêtements appropriés – Les vêtements amples
ou détachés ne doivent jamais être portés pendant
l’utilisation du four.
Entretien par l’utilisateur – Ne pas réparer ni remplacer
toute pièce du four si ce n’est pas spécifiquement
recommandé dans le manuel. Toute autre opération
d’entretien ou de réparation doit être confiée à un
technicien qualifié.
Ne pas utiliser d’eau pour éteindre un feu de graisse –
Étouffer le feu ou les flammes ou utiliser des extincteurs
polyvalents à produits chimiques secs ou un extincteur à
mousse.
Utiliser seulement des mitaines sèches de four – Des
mitaines de four mouillées ou humides sur des surfaces
chaudes peuvent provoquer des brûlures provenant de la
vapeur. Ne pas laisser les mitaines de four toucher les
éléments chauffants. Ne pas utiliser une serviette ou un
tissu épais.
Exercer une grande prudence lors de l’ouverture de la
porte. Laisser l’air chaud ou la vapeur s’échapper avant
d’enlever ou de remplacer un plat.
Ne pas faire chauffer des contenants fermés –
L’accumulation de pression peut causer une explosion du
contenant et des blessures.
Ne jamais obstruer les ouvertures des évents.
Placement des grilles du four – Toujours placer les grilles
du four à l’endroit désiré, lorsque le four est froid. Si la
grille doit être déplacée lorsque le four est chaud, ne pas
laisser des mitaines de four toucher l’élément chauffant
dans le four.
Remisage dans le four – Des matériaux inflammables ne
doivent pas être remisés dans un four.
NE PAS TOUCHER LES ÉLÉMENTS CHAUFFANTS OU
LES SURFACES INTÉRIEURES DU FOUR – les éléments
chauffants peuvent être chauds même s’ils ont une teinte
foncée. Les surfaces intérieures de four deviennent assez
chaudes pour causer des brûlures. Pendant et après
l’utilisation, ne pas toucher ou laisser des vêtements ou
autres matériaux inflammables venir en contact avec les
éléments chauds ou les surfaces intérieures chaudes du
four avant qu’ils aient eu assez de temps pour refroidir.
D’autres surfaces du four peuvent devenir assez chaudes
pour causer des brûlures. Ces surfaces comprennent les
ouvertures de l’évent du four et la surface près de ces
ouvertures, les portes du four et les hublots des portes
du four.
Fours autonettoyants :
Ne pas nettoyer le joint de la porte – Le joint de la porte est
essentiel pour l’étanchéité. Veiller à ne pas frotter,
endommager ou déplacer le joint.
Ne pas utiliser les produits commerciaux de nettoyage de
four – On ne doit pas utiliser un produit commercial de
nettoyage de four ou un enduit de protection des surfaces
internes du four quel qu’en soit le type, sur les surfaces du
four ou les surfaces voisines.
Nettoyer uniquement les pièces indiquées dans le manuel.
Avant d’exécuter le programme d’autonettoyage du four,
enlever la lèchefrite et sa grille et les autres ustensiles.
Avertissements de la proposition 65 de l'État de Californie :
AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
cancers.
AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de
malformations et autres déficiences de naissance.
16
GUIDE DES CARACTÉRISTIQUES
Ce manuel couvre différents modèles. Le modèle que vous avez peut comporter toutes les caractéristiques énumérées ou seulement
certaines d'entre elles. Consulter ce manuel ou la section d'aide à la clientèle sur www.whirlpool.ca pour des instructions plus détaillées.
TOUCHE CARACTÉ-
RISTIQUE
INSTRUCTIONS
SETTINGS/
CLOCK (réglages/
horloge)
Horloge Cette horloge peut utiliser un programme de 12 ou 24 heures. Voir la section “Commandes
électroniques du four”.
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu’à afficher “CLOCK” (horloge).
2. Appuyer sur les touches numériques pour régler l'heure du jour.
3. Appuyer sur START (mise en marche).
SETTINGS/
CLOCK (réglages/
horloge)
Fonctions
d'utilisation
du
four
Permet de personnaliser les signaux sonores audibles et le fonctionnement du four pour
convenir à vos besoins. Voir la section “Utilisation du four”.
Lampe du four Lampe de la
cavité du four
Alors que la(les) porte(s) du four sont fermées, appuyer sur la touche Lampe du four pour
allumer ou éteindre les lampes. Les lampes du four s'allument à l'ouverture de la porte.
TIMER SET/OFF
(minuterie
réglage/arrêt)
Minuterie
du
four
La minuterie peut être réglée en heures ou en minutes jusqu’à concurrence de 9 heures et
59
minutes.
1. Appuyer sur TIMER SET/OFF (minuterie réglage/arrêt).
2. Appuyer sur les touches numériques pour régler la durée en hr-min. Les zéros de gauche
peuvent ne pas être entrés. Entrer “2” pour 2 minutes par exemple.
3. Appuyer sur TIMER SET/OFF (minuterie réglage/arrêt) pour commencer le compte à
rebours. Si activés, le(les) signal(signaux) sonore(s) de la minuterie retentissent à la fin du
compte à rebours.
4. Appuyer sur TIMER SET/OFF (minuterie réglage/arrêt) pour annuler la minuterie et revenir à
l’heure du jour. Ne pas appuyer sur la touche Cancel (annulation), sinon le four s’éteindra.
START (mise en
marche)
Démarrage de
la
cuisson
La touche Start (mise en marche) met en marche n’importe quelle fonction du four. Si, après
avoir appuyé sur une touche, on n’appuie pas sur Start (mise en marche) dans les 2
minutes qui
suivent, la fonction est annulée et l’heure s’affiche.
CANCEL
(annulation)
Fonction du four La touche Cancel (annulation) désactive toutes les fonctions du four à l'exception de l'horloge,
de la minuterie et du verrouillage des commandes du four sélectionné.
AVERTISSEMENT
Risque d'empoisonnement alimentaire
Ne pas laisser des aliments dans un four plus d'une
heure avant ou après la cuisson.
Le non-respect de cette instruction peut causer un
empoisonnement alimentaire ou une maladie.
17
BAKE (cuisson au
four)
Cuisson au four
et rôtissage
1. Appuyer sur BAKE (cuisson au four) pour le four désiré.
2. Utiliser les touches numériques pour régler la température souhaitée. Si la température
entrée ne se trouve pas dans la fourchette des températures autorisées, la température
minimale ou maximale autorisée s'affiche. Entrer une température dans la fourchette
autorisée.
3. Appuyer sur START (mise en marche) pour le four désiré.
4. Pour modifier la température lorsqu'un four est utilisé, répéter les étapes 2 et 3. Pour
modifier la température lorsque deux fours sont utilisés, appuyer sur 1 pour le four supérieur
et sur 2 pour le four inférieur. Répéter ensuite les étapes 2 et 3.
5. Appuyer sur CANCEL (annulation) pour le four désiré après avoir terminé.
BROIL (cuisson
au gril)
Cuisson au gril 1. Appuyer sur BROIL (cuisson au gril) pour le four désiré.
2. Utiliser les touches numériques pour régler la température souhaitée. Si la température
entrée ne se trouve pas dans la fourchette des températures autorisées, la température
minimale ou maximale autorisée s'affiche. Entrer une température dans la fourchette
autorisée.
3. Appuyer sur START (mise en marche) pour le four désiré, et laisser le four préchauffer
pendant 5
minutes.
4. Placer les ustensiles de cuisine dans le four et fermer la porte du four.
5. Pour modifier la température lorsqu'un four est utilisé, répéter les étapes 2 et 3. Pour
modifier la température lorsque deux fours sont utilisés, appuyer sur 1 pour le four supérieur
et sur 2 pour le four inférieur. Répéter ensuite les étapes 2 et 3.
6. Appuyer sur CANCEL (annulation) pour le four désiré après avoir terminé.
HOLD WARM
(maintien au
chaud)
Maintien
au
chaud
Les aliments doivent être à la température de service avant d’être placés dans le four chaud.
1. Appuyer sur HOLD WARM (maintien au chaud).
2. Utiliser les touches numériques pour régler la température souhaitée. Si la température
entrée ne se trouve pas dans la fourchette des températures autorisées, la température
minimale ou maximale autorisée s'affiche. Entrer une température dans la fourchette
autorisée.
3. Appuyer sur START (mise en marche) pour le four désiré.
4. Pour changer la température, répéter les étapes 2 et 3.
5. Appuyer sur CANCEL (annulation) pour le four désiré après avoir terminé.
DELAY START
(mise en marche
différée)
Mise en marche
différée
La touche Delay Start (mise en marche différée) sert à entrer l’heure de mise en marche pour un
four équipé d'une fonction de mise en marche différée. La mise en marche différée ne doit pas
être utilisée pour les aliments tels que pains et gâteaux, car ils risquent de ne pas bien cuire.
Pour régler une cuisson minutée ou une cuisson minutée différée, voir la section “Durée de
cuisson”.
COOK TIME
(durée de
cuisson)
Cuisson
minutée
La fonction de durée de cuisson permet d’allumer le four à une certaine heure de la journée,
d'effectuer une cuisson pendant une durée déterminée et/ou d’éteindre le four
automatiquement.
Pour régler une cuisson minutée ou une cuisson minutée différée, voir la section “Durée de
cuisson”.
CLEAN MODES
(modes de
nettoyage)
(four supérieur
uniquement)
Programme
d'autonettoyage
Voir la section “Programme d’autonettoyage”.
START LOWER
hold 3 sec. (mise
en marche du four
infèrieur appuyer
pendant 3 sec.)
Verrouillage
des
commandes
du four
1. Vérifier que toutes les fonctions du four et de la table de cuisson sont désactivées, y
compris les fonctions de minuterie et de cuisson minutée.
2. Appuyer sans relâcher sur START LOWER (mise en marche du four infèrieur) pendant
3
secondes.
3. Si cette fonction est activée, un signal sonore retentit et “TABLEAU DE COMMANDE
VERROUILLÉ” s'affiche.
4. Répéter pour déverrouiller. Aucune touche ne fonctionne lorsque les commandes sont
verrouillées.
TOUCHE CARACTÉ-
RISTIQUE
INSTRUCTIONS
18
UTILISATION DU FOUR
Des odeurs et de la fumée sont normales lorsque le four est utilisé
la première fois, ou lorsqu'il est très sale.
IMPORTANT : Certains oiseaux sont très sensibles aux
émanations de fumée. L’exposition aux émanations peut entraîner
la mort de certains oiseaux. Toujours déplacer les oiseaux dans
une autre pièce fermée et bien aérée.
Commandes électroniques du four
Affichage des commandes
L'affichage clignote lorsqu'il est mis en marche ou après une
coupure de courant. Lorsque le four n’est pas en marche, l’heure
du jour est affichée.
Signaux sonores
Les signaux sonores indiquent ce qui suit :
Un seul signal sonore
Appui sur une touche valide.
Le four est préchauffé (signal sonore long).
Minuteur de cuisine (signal sonore long avec signal sonore de
rappel toutes les 60 secondes).
Fonction entrée.
Trois signaux sonores
Appui sur une touche non valide.
Quatre signaux sonores
Fin de programme (avec signal sonore de rappel toutes les
60
secondes).
Appuyer sur la touche Settings/Clock (réglages/horloge) pour
modifier les réglages des signaux sonores.
Réglages
De nombreuses caractéristiques du module de commande du four
peuvent être ajustées pour répondre à vos besoins. On effectue
ces changements à l’aide de la touche Settings/Clock (réglages/
horloge).
Utiliser la touche Settings/Clock (réglages/horloge) pour faire
défiler les caractéristiques qui peuvent être modifiées. L'affichage
passe au réglage suivant à chaque pression supplémentaire sur
Settings/Clock (réglages/horloge). Après avoir sélectionné la
caractéristique à modifier, le tableau de commande demande à
l’utilisateur d’effectuer la manœuvre nécessaire. Les sections
suivantes détaillent toutes les modifications de caractéristiques.
Appuyer sur CANCEL (annulation) pour sortir du mode Settings
(réglages).
Fahrenheit et Celsius
Le four est préréglé pour un affichage de la température en degrés
Fahrenheit, mais on peut le permuter en degrés Celsius.
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “TEMP UNIT” (unité de température) s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur CANCEL (annulation) pour quitter ce mode et
afficher l'heure.
Désactivation des signaux sonores
Désactive tous les signaux sonores, y compris le signal sonore de
fin de programme et les signaux sonores d'appui sur une touche.
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “SOUND” (signaux sonores) s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur CANCEL (annulation) pour quitter ce mode et
afficher l'heure.
Volume sonore
Règle le timbre du signal sonore à bas ou élevé.
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “SOUND VOLUME” (volume sonore) s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur CANCEL (annulation) pour quitter ce mode et
afficher l'heure.
Signal sonore de fin de programme
Active ou désactive les signaux sonores qui retentissent à la fin
d'un programme.
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “END TONE” (signal de fin) s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur CANCEL (annulation) pour quitter ce mode et
afficher l'heure.
Signaux sonores d'appui sur une touche
Active ou désactive les signaux sonores lorsqu'on appuie sur une
touche.
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “KEYPRESS TONE” (signal de pression sur une touche)
s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur CANCEL (annulation) pour quitter ce mode et
afficher l'heure.
Désactivation des signaux sonores de rappel
Désactive les courts signaux sonores qui retentissent toutes les
minutes après les signaux sonores de fin de programme.
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “REMINDER TONE” (signal de rappel) s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur CANCEL (annulation) pour quitter ce mode et
afficher l'heure.
19
Horloge 12/24 heures
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “12/24 HOUR” s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur CANCEL (annulation) pour quitter ce mode et
afficher l'heure.
Mode démo
IMPORTANT : Ce mode est conçu pour le personnel de vente en
rayon avec une alimentation de 120V et permet de présenter le
fonctionnement des caractéristiques du tableau de commande
sans pour autant activer les éléments de chauffage. Si cette
caractéristique est activée, le four ne fonctionnera pas.
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “DEMO MODE” (mode de démonstration) s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur CANCEL (annulation) pour quitter ce mode et
afficher l'heure.
Arrêt au bout de 12 heures
La commande du four est réglée pour éteindre le four
automatiquement 12 heures après que le four a activé une fonction
de cuisson ou de nettoyage. Ceci ne perturbera aucune fonction
de cuisson minutée ou différée.
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “12
HR AUTO OFF” (arrêt auto au bout de 12 heures)
s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche.
3. Appuyer sur la touche “1” pour modifier le réglage.
4. Appuyer sur CANCEL (annulation) pour quitter ce mode et
afficher l'heure.
Langues - Menu d'affichage déroulant
Les options de langues sont l'anglais, l’espagnol et le français.
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “LANGUAGE” (langue) s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche.
3. Appuyer sur les touches numériques comme indiqué par le
texte déroulant afin de sélectionner la nouvelle température.
4. Appuyer sur CANCEL (annulation) pour quitter ce mode et
afficher l'heure.
Commande de décalage de température du four
IMPORTANT : Ne pas utiliser de thermomètre pour mesurer la
température du four. Les éléments chauffants s'allument et
s'éteignent en alternance pour maintenir une température
constante, mais leur température peut varier légèrement dans un
sens ou dans l'autre du fait de cette alternance. De nombreux
thermomètres réagissent lentement à un changement de
température, et ne donneront pas une mesure exacte du fait de
cette alternance.
Le four fournit des températures précises; toutefois, il peut cuire
plus rapidement ou plus lentement que votre four précédent, c’est
pourquoi la température peut être ajustée à vos besoins de
cuisson. Elle peut être modifiée en degrés Fahrenheit ou Celsius.
Ajustement de la température du four :
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à ce
que “TEMP CALIB” (calibrage de la température) s'affiche.
2. Le réglage utilisé à ce moment-là s'affiche. Appuyer sur la
touche “1” pour passer du four supérieur au four inférieur et
inversement.
3. Appuyer sur START (mise en marche) pour le four desiré pour
sélectionner le choix affiché à l'étape 2. Attendre quelques
secondes pour laisser l'affichage changer ou appuyer sur
START (mise en marche) pour le four desiré, puis passer à
l'étape 4.
4. Appuyer sur la touche “3” pour augmenter la température par
tranches de 5°F (3°C), ou appuyer sur la touche “6” pour
diminuer la température par tranches de 5°F (3°C). La plage de
température doit se situer entre -30°F et +30°F (-18°C à
+18°C).
5. Appuyer sur START (mise en marche).
6. Appuyer sur CANCEL (annulation)
pour le four desiré
pour
quitter ce mode et afficher l'heure.
Maintien au chaud
IMPORTANT : Les aliments doivent être à la température de
service avant de les placer dans le four chaud. Les aliments
peuvent être gardés au four jusqu'à une heure; toutefois, les pains
et les mets en sauce peuvent devenir trop secs s'ils sont laissés
dans le four durant la fonction Hold Warm (maintien au chaud).
Pour de meilleurs résultats, couvrir les aliments.
La caractéristique Hold Warm (maintien au chaud) permet de
garder les aliments cuits chauds à la température de service.
Utilisation :
1. Appuyer sur HOLD WARM (maintien au chaud) pour le four
désiré.
2. Utiliser les touches numériques pour régler la température
souhaitée. Si la température entrée ne se trouve pas dans la
fourchette des températures autorisées, la température
minimale ou maximale autorisée s'affiche. Entrer une
température dans la fourchette autorisée.
REMARQUE : La température peut être modifiée à tout
moment en appuyant sur les touches numériques pour entrer la
température souhaitée puis appuyer sur START (mise en
marche) pour le four désiré.
3. Appuyer sur START (mise en marche) pour le four désiré.
4. Placer les aliments dans le four.
5. Appuyer sur CANCEL (annulation) pour le four désiré après
avoir terminé.
6. Retirer les aliments du four.
Pour annuler la fonction de maintien au chaud :
1. Appuyer sur CANCEL (annulation) pour le four désiré.
2. Retirer les aliments du four.
AVERTISSEMENT
Risque d'empoisonnement alimentaire
Ne pas laisser des aliments dans un four plus d'une
heure avant ou après la cuisson.
Le non-respect de cette instruction peut causer un
empoisonnement alimentaire ou une maladie.
20
Mode Sabbat
Le mode Sabbat maintient le réglage de cuisson au four tant que le
four n’est pas éteint.
Lorsque le mode Sabbat est réglé, seul le programme de cuisson
au four fonctionne. Tous les autres programmes de cuisson et de
nettoyage sont désactivés. Aucun signal sonore ne retentit et les
affichages n’indiquent pas les changements de température.
Lorsque la porte du four est ouverte ou fermée, la lampe du four ne
s’allume ou ne s’éteint pas et les éléments de chauffage ne
s’allument ou ne s’éteignent pas immédiatement.
Activation du mode Sabbat (une seule fois) :
1. Appuyer sur SETTINGS/CLOCK (réglages/horloge) jusqu'à
afficher “SABBATH”.
2. Appuyer sur la touche 1. Le mode Sabbat peut être utilisé pour
la cuisson au four.
3. Appuyer sur CANCEL (annulation) pour sauvegarder les
réglages et quitter pour afficher l'heure.
REMARQUE : Pour désactiver le mode Sabbat, répéter les
étapes 1 à 3 pour changer l’état de “SABBATH ON” (mode
Sabbat actif) à “SABBATH OFF” (mode Sabbat inactif).
Activation du mode Sabbat :
1. Appuyer sur la touche BAKE (cuisson au four) du four souhaité.
2. Utiliser les touches numériques pour régler la température
souhaitée. Si la température entrée ne se trouve pas dans la
fourchette des températures autorisées, la température
minimale ou maximale autorisée s'affiche. Entrer une
température dans la fourchette autorisée.
3. Appuyer sur START (mise en marche) pour le four désiré.
Pour une cuisson minutée au mode Sabbat, appuyer sur COOK
TIME (durée de cuisson), puis sur les touches numériques pour
régler la durée de cuisson désirée. Appuyer sur START (mise en
marche) pour le four désiré.
4. (Facultatif) Si le mode Sabbat doit être activé pour les deux
fours, répéter les étapes 1 à 3 pour le second four.
5. Appuyer sur SETTINGS/CLOCK (réglages/horloge). Trois
signaux sonores retentissent. Ensuite, appuyer sur “7”. “SAb”
apparaît sur l'affichage.
Réglage de la température (lorsque le mode Sabbat fonctionne
sur un seul four uniquement) :
1. Appuyer sur les touches numériques comme indiqué par le
texte déroulant afin de sélectionner la nouvelle température.
REMARQUE : Le changement de température n’apparaît pas
sur l’affichage et aucun son n’est émis. Le texte déroulant
s’affiche tel qu’il était avant que l’on n’appuie sur la touche.
2. Appuyer sur START (mise en marche) pour le four désiré.
Réglage de la température (lorsque le mode Sabbat fonctionne
sur les deux fours) :
1. Appuyer sur la touche BAKE (cuisson au four) du four souhaité.
2. Appuyer sur les touches numériques comme indiqué par le
texte déroulant afin de sélectionner la nouvelle température.
REMARQUE : Le changement de température n’apparaît pas
sur l’affichage et aucun son n’est émis. Le texte déroulant
s’affiche tel qu’il était avant que l’on n’appuie sur la touche.
3. Appuyer sur START (mise en marche) pour le four désiré.
Désactivation du mode Sabbat :
Appuyer sur SETTINGS/CLOCK (réglages/horloge), puis “7” pour
revenir à la cuisson au four traditionnelle ou appuyer sur CANCEL
(annulation) pour le four désiré pour éteindre le(s) four(s).
Papier d’aluminium
IMPORTANT : Pour éviter des dommages permanents au fini du
fond du four, ne pas recouvrir le fond du four avec du papier
d’aluminium ou un revêtement quelconque.
Pour assurer une bonne circulation de l’air et des résultats de
cuisson optimaux, ne pas recouvrir la grille entière de papier
d’aluminium.
Positionnement des grilles et des
ustensiles de cuisson au four
IMPORTANT : Afin d'éviter des dommages permanents au fini en
porcelaine, ne pas placer d'aliments ou d'ustensiles de cuisson au
four directement sur la porte ou sur le fond du four.
Grilles
Placer les grilles avant d’allumer le four.
Ne pas installer les grilles lorsque des ustensiles de cuisson au
four se trouvent dessus.
S’assurer que les grilles sont d'aplomb.
Placer les aliments de façon à ce qu'ils ne touchent pas
l'élément de cuisson au gril en augmentant de volume. Laisser
un espace d'au moins ¹⁄₂" (1,3 cm) entre les plats et l'élément
de cuisson au gril.
Pour déplacer une grille, la tirer jusqu'à la butée, soulever l'avant
puis la retirer. Se servir des illustrations et du tableau suivants
comme guide pour le positionnement des grilles.
Positions de grille
Cuisson au gril
Cuisson au four
Cuisson au four des gâteaux à étages, sur 1 grille
Placer les gâteaux sur la grille tel qu'indiqué.
Aliments Position de la grille
Viandes grillées, volaille, poisson 4
Cuire au gril/griller les viandes, les
hamburgers, les steaks
5
Aliments Position de la grille
Gros rôtis, viandes rôties ou volailles 1 ou 2
La plupart des produits de boulangerie,
mets en sauce
2 ou 3
1
2
3
4
5
1 / 1

Whirlpool WOD51ES4EB Mode d'emploi

Catégorie
Cuisinières
Taper
Mode d'emploi

dans d''autres langues