Windsor versamatic 14 Operating Instructions Manual

Catégorie
Cheminées
Taper
Operating Instructions Manual

Ce manuel convient également à

86404570-C 02/01/16
Versamatic 14 & 18 120V
Vacuum
Operating Instructions (ENG)
MODEL: 1.012-050.0
VS14
1.012-051.0
VS18
From Serial No. # C264025101 for VS14
# C265009211 for VS18
If Serial Number not listed, Contact Manufacturer
2 86404570 VERSAMATIC 14 & 18 120V
Machine Data Label
Warranty Registration
Thank you for purchasing a Kärcher North America product. Warranty registration is quick
and easy. Your registration will allow us to serve you better over the lifetime of the product.
To register your product go to :
http://warranty.karcherna.com/
For customer assistance:
1-800-444-7654
3
Table of Contents
Machine Data Label . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . 3
How To Use This Manual . . . . . . . . . . . . . . . . . . . 4
Safety
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . 5
GROUNDING INSTRUCTIONS . . . . . . . . . . . . . . 6
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . 7
Operations
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Assembling The Vacuum Cleaner . . . . . . . . . . . . 8
Attaching Suction Hose. . . . . . . . . . . . . . . . . . . . . 8
Swivel Neck Latch. . . . . . . . . . . . . . . . . . . . . . . . . 9
Power Head On . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Brush Controller . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Filter Level Indicator . . . . . . . . . . . . . . . . . . . . . . . 9
Maintenance
Changing The Paper Bag . . . . . . . . . . . . . . . . . . 10
Changing Filters . . . . . . . . . . . . . . . . . . . . . . . . . 10
Clearing Blockages . . . . . . . . . . . . . . . . . . . . . . . 11
Changing The Brush Strip. . . . . . . . . . . . . . . . . . 11
Removing the Switch Housing Cover . . . . . . . . . 12
Removing The Dust Bag Housing. . . . . . . . . . . . 12
Replacing The Vacuum Motor . . . . . . . . . . . . . . 13
Changing The Brush Roller. . . . . . . . . . . . . . . . . 13
Removing The Brush Roller Pulley . . . . . . . . . . . 13
Removing The Swivel Neck . . . . . . . . . . . . . . . . 14
Removing The Swivel Neck Cover . . . . . . . . . . . 14
Changing The Electronic Controller . . . . . . . . . . 14
Replacing the Foot Pedal . . . . . . . . . . . . . . . . . . 15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 16
Technical Data VS 14 (VS 18) . . . . . . . . . . . . . . 16
Parts
Tools, Bags & Filters. . . . . . . . . . . . . . . . . . . . . . 18
Upper Housing . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Power Head-VS 14 . . . . . . . . . . . . . . . . . . . . . . . 22
Power Head-VS 18 . . . . . . . . . . . . . . . . . . . . . . . 24
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 26
86404570 VERSAMATIC 14 & 18 120V
4
How To Use This Manual
This manual contains the following sections:
How to Use This Manual
•Safety
Operations
Maintenance
•Parts List
The HOW TO USE THIS MANUAL section will tell
you how to find important information for ordering
correct repair parts.
Parts may be ordered from authorized dealers. When
placing an order for parts, the machine model and
machine serial number are important. Refer to the
MACHINE DATA box which is filled out during the
installation of your machine. The MACHINE DATA
box is located on the inside of the front cover of this
manual.
The model and serial number of your machine is
located on the bottom-back of the machine.
The SAFETY section contains important information
regarding hazardous or unsafe practices of the
machine. Levels of hazards are identified that could
result in product damage, personal injury, or severe
injury resulting in death.
The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.
The MAINTENANCE section contains preventive
maintenance to keep the machine and its compo-
nents in good working condition. They are listed in
this general order:
Dust Bag
Filters
Blockage
•Brush strips
Troubleshooting
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:
ITEM – column refers to the reference num-
ber on the parts illustration.
PART NO. – column lists the part number for
the part.
REF NO. – reference number.
DESCRIPTION – column is a brief descrip-
tion of the part.
NOTES – column for information not noted by
the other columns.
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement
parts numbers needed for ordering future parts.
NOTE: The manual part number is located on the
lower right corner of the front cover.
Model:
Date of Purchase:
Serial Number:
Dealer:
Address:
Phone Number:
Sales Representative:
86404570 VERSAMATIC 14 & 18 120V
5
Safety
IMPORTANT SAFETY INSTRUCTIONS
When using this machine, basic precaution
must always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.
To reduce the risk of fire, electric shock, or injury:
1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
2. Do not use outdoors or on wet surfaces.
3. Do not use near small children. Do not allow to be used as a toy. Close attention is necessary when used by
or near children.
4. Use only as described in this manual. Use only manufacturer's recommended attachments.
5. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped,
damaged, left outdoors, or dropped into water, return it to a service center.
6. Do not pull or carry by the cord, use cord as a handle, close a door on cord, or pull cord around sharp edges
or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
7. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
8. Do not handle plug or appliance with wet hands.
9. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and
anything that may reduce air flow.
10. Keep hair, loose clothing, fingers and all parts of body away from openings and moving parts. Do not place
fingers or other body parts under vacuum unless unplugged.
11. Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot ashes.
12. Do not use without dust bag and/or filters in place. Do not wash filters.
13. Turn off all controls before unplugging.
14. Use extra care when cleaning on stairs.
15. Do not use to pick up flammable or combustible liquids such as gasoline or use in areas where they may
have been present.
16. Machines can cause fire when operated near flammable vapors or materials. Do not operate this machine
near flammable fluids, dust or vapors.
17. Maintenance and repairs must be done by qualified personnel.
18. Connect to a properly grounded outlet only. See Grounding Instructions.
19. Do not use machine as a step.
20. If used on plush carpet or carpet with thick padding, do not leave machine in one place with machine turned
on.
21. Do not use the handle in the dust bag housing to carry the machine.
READ AND SAVE THESE INSTRUCTIONS
86404570 VERSAMATIC 14 & 18 120V
6
Safety
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having
an equipment-grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet
that is properly installed and grounded in accordance with all local codes and ordinances.
Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a
qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not
modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug illus-
trated in sketch A. A temporary adaptor looks like adaptor illustrated in sketches B and C, may be used it
connect this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is not available. The
temporary adaptor should be used only until a properly grounded outlet (sketch A) can be installed by a qualified
electrician. The green colored rigid ear, lug or the like extending from the adaptor must be connected to a
permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held
in place by a metal screw.
Note: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code.
86404570 VERSAMATIC 14 & 18 120V
GROUNDING
PIN
GROUNDED
OUTLET
ADAPTER
METAL SCREW
TAB FOR
GROUNDING SCREW
GROUNDED
OUTLET BOX
(A) (B)
(C)
7
Safety
IMPORTANT SAFEGUARDS
Accidents due to misuse can only be prevented by those using the machine. To guard against injury, basic
safety precautions should be observed, including the following:
Read and follow all safety instructions.
Electric shock could occur if used outdoors or on wet surfaces.
The vacuum cleaner is designed to be safe when used to perform cleaning functions. Should damage occur to
electrical or mechanical parts, cleaner should be repaired by a competent service center before using in order to
avoid further damage to machine or physical injury to user.
A damaged power cord could cause electrical shock and/or fire. To minimize this possibility observe the
following precautions:
Do not run cleaner over power cord.
Avoid closing doors on power cord pulling it around sharp edges, or placing sharp-edged objects upon it.
Wind cord no tighter than is necessary to retain it on the cord hooks.
When disconnecting power cord from electrical outlet, grasp the plug. Pulling it out by the cord itself can
damage cord insulation and internal connections to plug.
Your vacuum cleaner creates suction and contains a revolving brush. To avoid bodily injury from suction or
moving parts, vacuum cleaner brush should not be placed against, or in close proximity of loose clothing,
jewelry, hair or body surfaces while cleaner is connected to electrical outlet. Cleaner should not be used to
vacuum clothing while it is being worn. Keep children away from machine when in operation or plugged in.
If used on plus carpet or carpet with thick padding, turn off unit when handle is in upright position. When using
accessory tools, keep floor bush off carpet by keeping handle in locked position and lowering handle with on
hand to raise bush off floor. Operate accessories with other hand.
Always plug your cleaner into a standard wall outlet. Use of extension cord or light socket with inadequate
current-carry capacity could result in electric shock or fire hazard.
Disconnect cleaner from electrical outlet before servicing, such as changing bags or belts. You could receive
bodily injury from moving parts of machine should switch accidentally turned on. Disconnect cleaner from elec-
trical outlet before detaching power head.
Do not use your vacuum cleaner in areas where flammable and/or explosive vapor or dust is present to avoid
possibility of fire or explosion. Some cleaning fluids can produce such vapors. Areas on which cleaning fluids
have been used should be completely dry and thoroughly aired before being vacuumed.
To avoid fire hazard, do not pick up matches, fireplace ashes, or smoking material with cleaner.
Keep your work area well lighted to avoid picking up harmful materials (such as liquids, sharp objects, or burning
substances) and avoid tripping accidents.
Use care when operating the cleaner on irregular surfaces such as stairs, as falling cleaner could cause bodily
injury and/or mechanical damage. Proper storage of machine in an out-of-way area immediately after use will
also prevent accidents caused by tripping over cleaner.
Store your vacuum indoors in a cool, dry area not exposed to the weather to avoid electrical shock and/or
cleaner damage.
Exercise strict supervision to prevent injury when using vacuum cleaner near children or when child is allowed
to operate vacuum cleaner. Do not allow children to play with vacuum cleaner and never leave cleaner plugged
in and unattended.
SAVE THESE INSTRUCTIONS
86404570 VERSAMATIC 14 & 18 120V
8
Operations
Components
1. Vacuum motor housing
2. Dust bag housing
3. Suction hose
4. On-off switch
5. Cables cleats
6. Carrying recess
7. Back cover
8. Power head
Assembling The Vacuum Cleaner
Hold the vacuum motor housing in the vertical
position and insert into the power head. Locate the
line (13) on the motor housing accurately opposite
the rib on the swivel neck (14). The locking catch (15)
must be turned to the left during the locating. Secure
the vacuum section in place by turning the locking
catch to the vertical position.
Attaching Suction Hose
Push the black end of the hose into the connecting
tube (12) so that it clicks into place.
To disconnect the hose, press the sides of the
retaining ring (11) and pull the hose out of tube.
86404570 VERSAMATIC 14 & 18 120V
13
14
15
12
11
5
2
1
7
3
8
6
4
9
Operations
Swivel Neck Latch
To release the machine from the upright position
depress the foot pedal (16).
Power Head On
Power head motor stops automatically when hand
nozzle (17) is withdrawn and restarts automatically
when reinserted. If power head does not start, check
that hand nozzle is fully inserted.
Brush Controller
The electronic brush controller monitors the operation
of the brush.
Green light: Brush correctly set and running.
Green light and red: Adjust the brush setting by
turning the pile adjustment knob (19) to a lower
number.
Red blinking light: The brush has become blocked
and is not turning. Switch off. Unplug from the outlet
and clear the blockage.
Filter Level Indicator
If warning light (18) comes on check:
a) Is the dust bag full?
b) Is there a blockage in the hose or power head?
86404570 VERSAMATIC 14 & 18 120V
16
2
2
19
18
10
Maintenance
Unplug machine from electrical outlet before
doing any maintenance.
Changing The Paper Bag
To change the dust bag: Remove back cover. Push
down lever (20). Lower dust bag from connecting
tube. Close aperture of dust bag top with cardboard
cover (21 A). To fit new dust bag: Insert top of dust
bag (21) into slot (22). Push lever (20) down and fit
aperture of dust bag top over connecting tube. Return
lever so that it is in horizontal position.
Changing Filters
Motor filters (23) Replace after 20 filter bags have
been used.
Exhaust filter (24) - Change when it becomes dirty.
Press the button (25) and pull the filter forwards. To
insert a new filter, locate the filter into the motor
housing and push up until the button (25) engages
into place.
NOTE: Hospital grade filters are available.
86404570 VERSAMATIC 14 & 18 120V
24
2
25
23
20
21
21A
22
11
Maintenance
Clearing Blockages
If the bag-full warning light shows before the dust bag
is full, check for blockages. Release the hose by
squeezing the tabs of the retaining ring (11). Reverse
the hose and put the wand-end into the connecting
tube (12). Remove the obstruction by switching on the
machine, holding the hose upright. If necessary
rapidly lift your hand on and off the end of the hose.
NOTE: Never use a stick or sharp object to clear the
hose.
Check for blockage in the swivel neck of the power
head and under the orange trap door (33) located on
the bottom of the power head.
Check the passage between the two openings in the
power head for blockage also.
Changing The Brush Strip
To replace brush strip, push button (32), remove the
side plate (26) and rotate the brush so that the brush
strip (27) can be pulled out of the opening. Ensure
that the new brush strip is fully inserted, then press
the side plate back into place.
NOTE: Ensure plate is locked in place.
86404570 VERSAMATIC 14 & 18 120V
33
26
26a
32
11
12
11
12
12
Maintenance
Maintenance and repairs must be done by
qualified personnel.
To reduce risk of electric shock unplug before
cleaning or servicing.
Removing the Switch Housing Cover
Remove the three screws then lift cover off. Circuit
board (33) can be removed by loosening screw (32).
Removing The Dust Bag Housing
Remove the back cover, then remove the 4 screws
(2). Carefully lift the dust bag housing off the power
head.
NOTE: The power cord remains attached between
the dust bag housing and the power head.
86404570 VERSAMATIC 14 & 18 120V
2
2
2
1
32
33
3 Wire
13
Maintenance
Replacing The Vacuum Motor
First detach the two black wires from the terminal
block. When replacing, ensure that the motor support
is fully located onto the motor cover. The motor cover
should then be firmly located onto the vacuum motor
and the motor, with its cover and support, firmly
seated into position as shown in the vacuum motor
housing.
When properly seated the motor cannot be turned.
Replace motor seal.
Changing The Brush Roller
Push button (32), remove the side plate (26) and
remove the four (VS14) or five (VS18) screws (27)
from underneath the chassis. The cover and the
button (32) can then be lifted off.
Push the belt (29) off the motor pulley (30), remove
the bumper (41).
Remove the three screws (27) from the brush bearing
blocks (42 & 43). Lift the bearing blocks out and
replace the brush roller.
Removing The Brush Roller Pulley
Hold the roller in one hand and turn the pulley (31) in
a clockwise direction.
To remove the motor pulley (30) insert a screwdriver
into a groove and give a light tap in a counterclock-
wise direction. The loosened pulley can then be
removed.
86404570 VERSAMATIC 14 & 18 120V
27
27
26
32
27
27
27
29
30
41
42
43
31
30
14
Maintenance
Removing The Swivel Neck
To remove the swivel neck (35) remove the two small
screws (36) from the swivel neck supports (37) then
lift the swivel neck assembly from the chassis.
NOTE: On re-assembly ensure that the wires from
the swivel neck are not trapped when the power
head cover is replaced.
Removing The Swivel Neck Cover
Remove the retaining screw (38), slide the cover (39)
downwards then lift out.
NOTE: On re-assembly check that the leads do not
become trapped.
Changing The Electronic Controller
Disconnect the lead from the motor. Lift the controller
(34) upwards from the motor. Lift the controller
upwards from the swivel neck.
86404570 VERSAMATIC 14 & 18 120V
36
X
36
37
35
37
34
34
X
X
38
39
15
Maintenance
Replacing the Foot Pedal
Remove the power head from the upper housing.
Remove the cover from the power head and the
retaining screw. Insert a screw driver in the notch on
the axle and slide the axle out. Remove and replace
foot pedal. Re-assemble.
NOTE: Ensure that at re-assembly, the axle (0)
notch (40) is visible as shown.
86404570 VERSAMATIC 14 & 18 120V
0
40
16
Maintenance
Troubleshooting
Technical Data VS 14 (VS 18)
PROBLEM CAUSE SOLUTION
Brush not turning
Hose nozzle not far enough into neck Reposition hose nozzle into neck
Brush jammed Turn off machine, clear brush and restart
Brush strip not fully inserted Push brush strip in all the way
Broken belt Replace belt
Red light stays on at
lowest brush setting
(#1)
Brush worn Replace brush strip
Full bag light on, or
poor suction
Full dust bag Replace bag
Hose clogged Remove and clean hose
Neck clogged
Disconnect floor head from vac tank and
clean neck
Bag not properly installed Re-insert bag correctly
Exhaust or motor filter clogged Clean or replace filter
Back cover leaking air
Re-Install dust bag, motor filter and back
cover to ensure tight fit all around
Full bag light off
when vacuum hose
is blocked or bag is
full
Sensor out of adjustment
Remove back door and use small screw-
driver to turn screw behind light, counter-
clockwise
Back door won’t
close
Bag not properly installed Re-insert bag correctly
Motor filter not in position Re-insert filter correctly
Machine won’t turn
on
Faulty electrical circuit
Have machine check by qualified service
person
ITEM DIMENSION/CAPACITY
Voltage 120V, 60 hz
Vacuum floor 8,6 amp
Air flow 117 cfm
Dust bag 1,3 gal, 3-layer
Brush motor 1,4 (1,8) amp
Brush width 12 3/4 (16/3/4) inches
Brush drive Non slip drive belt with electronic overload protection
Brush strip Replaceable
Height 48 inches
Width 14 (18) in
Weight 16 (18) lbs
86404570 VERSAMATIC 14 & 18 120V
86404570-C 02/01/16
Versamatic 14 & 18 120V
Vacuum
Instrucciones de funcionamiento (SPA)
MODEL: 1.012-050.0
VS14
1.012-051.0
VS18
De Serial No. ## C264025101 for VS14
# C265009211 for VS18
Si Número de serie no aparece,Contacto Fabricante
2
Modelo:
Fecha de la compra:
Número de serie:
Distribuidor:
Dirección:
Nº de teléfono:
Representante de ventas:
86404570 VERSAMATIC 14 & 18 120V
Etiqueta de Datos de la Máquina
Registro de Garantía
Gracias por comprar un producto de Kärcher North America. El registro de la garantía
es rápido y fácil. Su registro permitirá que le sirvamos mejor sobre el curso de la vida
del producto. Para colocar su producto vaya:
http://warranty.karcherna.com/
Para el servicio de atención al cliente llame al:
1-800-444-7654
3
Índice
Etiqueta de Datos de la Máquina . . . . . . . . . . . . . 2
Índice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Cómo utilizar el manual. . . . . . . . . . . . . . . . . . . . . 4
Seguridad
INSTRUCCIONES DE SEGURIDAD
IMPORTANTES . . . . . . . . . . . . . . . . . . . . . . . . 5
INSTRUCCIONES PARA CONECTAR EL EQUIPO
A TIERRA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
IMPORTANTES PRECAUCIONES . . . . . . . . . . . 7
Operaciones
Componentes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Ensamblado de aspiradora . . . . . . . . . . . . . . . . . . 8
Conección de manguera de aspiración . . . . . . . . 8
Seguro del cuello giratorio . . . . . . . . . . . . . . . . . . 9
Cabezal de potencia encendido . . . . . . . . . . . . . . 9
Controlador de cepillo . . . . . . . . . . . . . . . . . . . . . . 9
Indicador del nivel del filtro . . . . . . . . . . . . . . . . . . 9
Mantenimiento
Cambio de la bolsa de papel . . . . . . . . . . . . . . . 10
Cambio de filtros . . . . . . . . . . . . . . . . . . . . . . . . . 10
Desbloqueos . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Cambio de la banda de cepillo . . . . . . . . . . . . . . 11
Remoción de la cubierta del alojamiento del
interruptor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Remoción del alojamiento de bolsa de polvo . . . 12
Reemplazo del motor de aspiración . . . . . . . . . . 13
Cambio del rodillo de cepillo . . . . . . . . . . . . . . . . 13
Remoción de la polea del rodillo
de cepillo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Remoción del cuello giratorio . . . . . . . . . . . . . . . 14
Remoción de la cubierta del
cuello giratorio. . . . . . . . . . . . . . . . . . . . . . . . . 14
Cambio del controlador electrónico . . . . . . . . . . 14
Reemplazo del pedal de pie . . . . . . . . . . . . . . . . 15
Resolución de problemas . . . . . . . . . . . . . . . . . . 16
Datos Técnicos VS 14 (VS 18) . . . . . . . . . . . . . . 16
Piezas
Tools, Bags & Filters. . . . . . . . . . . . . . . . . . . . . . 18
Upper Housing . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Power Head-VS 14 . . . . . . . . . . . . . . . . . . . . . . . 22
Power Head-VS 18 . . . . . . . . . . . . . . . . . . . . . . . 24
Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . 26
86404570 VERSAMATIC 14 & 18 120V
4
Cómo utilizar el manual
El manual contiene las siguientes secciones:
Cómo utilizar el manual
Seguridad
Operaciones
Mantenimiento
Lista de piezas
La sección CÓMO UTILIZAR EL MANUAL le indica
el modo de encontrar información importante para
pedir las piezas de recambio correctas.
Las piezas deben ser solicitadas a distribuidores
autorizados. Al realizar el pedido de piezas, es
importante saber el modelo y el número de serie
de la máquina. Consulte el cuadro DATOS DE LA
MÁQUINA que se completa durante la instalación
de la máquina. El cuadro DATOS DE LA MÁQUINA
está situado en la parte interior de la cubierta frontal
de este manual.
El modelo y número de serie de su máquina están
situados en el extremo inferior de la parte posterior
de la máquina.
La sección SEGURIDAD contiene información
importante acerca de los usos de la máquina
que pueden resultar peligrosos o poco seguros.
Se identifican niveles de riesgos que pueden
ocasionar lesiones personales o daños en el producto,
o lesiones graves que pueden provocar la muerte.
El objetivo de la sección FUNCIONAMIENTO
es familiarizar al operario con el manejo y el
funcionamiento de la máquina.
La sección MANTENIMIENTO incluye instrucciones
sobre mantenimiento preventivo para mantener la
máquina y sus componentes en buenas condiciones
de funcionamiento. Están clasificadas en el siguiente
orden general:
Bolsa de polvo
Filtros
Bloqueo
Bandas del cepillo
Resolución de problemas
La sección LISTA DE PIEZAS contiene ilustraciones
de las piezas ensambladas y la correspondiente lista
de piezas. Incluye además varias columnas con
información:
ITEM - la columna indica el número de
referencia en la ilustración de las piezas.
PART NO. – la columna enumera
el número de pieza.
REF NO. - N.º de referencia
DESCRIPTION - la columna es una breve
descripción de la pieza.
NOTES- esta columna contiene la
información no incluida en las otras
columnas.
NOTA: Si en la máquina se incluye un juego de
servicio u opciones, asegúrese de conservar las
INSTRUCCIONES DEL JUEGO que acompañan
al mismo. Éste contiene los números de piezas de
recambio necesarias para solicitar piezas en el futuro.
NOTA: El número de pieza correspondiente
al manual está ubicado en la esquina inferior
derecho de la tapa.
Modelo:
Fecha de la compra:
Número de serie:
Distribuidor:
Dirección:
Nº de teléfono:
Representante de ventas:
86404570 VERSAMATIC 14 & 18 120V
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62

Windsor versamatic 14 Operating Instructions Manual

Catégorie
Cheminées
Taper
Operating Instructions Manual
Ce manuel convient également à

dans d''autres langues