Macally HRMOUNT Le manuel du propriétaire

Marque: Macally

Modèle: HRMOUNT

Taper: Le manuel du propriétaire

Front

Back

HRMOUNT manual

80G

80.0 mm

490.0 mm

80.0 mm

490.0 mm

www.macally.com

Using The Headrest mount

1. Before setting up your HRMOUNT, park your car in a safe location.

Install the cradle on top of the base and slide it down until it clicks

and locks into place.

2. Raise your car’s head rest up so the metal posts are exposed.

Using The Headrest mount

3. Loosen the hook by turning the knob counterclockwise. This

will allow you to freely slide the hook to a desired location. Do

this on both hooks.

Using The Headrest mount

4.Arrange the hooks around the metal posts of your car as shown in

the figure. Then rotate the knobs clockwise to tighten the hooks so

there is a firm hold.

Using The Headrest mount

5.Loosen the hinge with the knob by rotating it counter clockwise.

You can now freely adjust the hinge. Adjust the bottom arm to sit

firmly against the car seat for added support. You can also adjust

the angle of the cradle for a better view.

Using The Headrest mount

6. Press the holder release button (1) and slide up the cradle grip to

adjust to the width for your device (2). You can also extend the base

to accommodate larger devices like tablets (3). Place your device in

the cradle (4).

Using The Headrest mount

7. Finally, adjust the hinge for the perfect viewing angle, further

tighten the hinge Knob and enjoy!

To rotate the holder

between vertical and

horizontal positions, simply

turn the mount clockwise or

counterclockwise as shown.

Keep in mind that you need to use some

force to be able to turn the cradle and the

cradle will make a clicking sound as you turn it.

ADJUSTABLE CAR SEAT

HEADREST MOUNT

User’s Guide

www.macally.com

Hardware Basics

For optimal results, please

minimize the cradle support

usage angle within 90º

Package Contents

Introduction

Macally Product Information

• Car seat headrest mount

• User’s Guide

Thank you for purchasing the Macally Fully Adjustable Car seat

headrest mount. This mount is made to hold iPad, iPhone, iPod,

Cell Phones, MP3 and GPS. The patented design provides a strong

mount even on the toughest roads.

Before you begin using this product, be sure to read this manual in

its entirety.

Registration

Please register this product at www.macally.com/register.html.

Technical Support

Please E-mail us at techsupport@macally.com,

In U.S.A. please call 1-909-230-6778

Mon-Fri 8:30 AM - 5:30 PM, Pacific Standard Time

Macally Product Information

Warranty

Macally peripherals warrants that this product will be free from

defects in title, materials and manufacturing workmanship for one

year from the date of purchase. If the product is found to be

defective then, as your sole remedy and as the manufacturer’s

only obligation, Macally will repair or replace the product. This

warranty shall not apply to products that have been subject to

abuse, misuse, abnormal electrical or environmental conditions,

or any condition other than what can be considered as normal use.

Limitation of Liability

The liability of Macally Peripherals arising from this warranty and

sale shall be limited to a refund of the purchase price. In no event

shall Macally Peripherals be liable for costs of procurement of

substitute products or services, or for any lost profit, or for any

consequential, incidental, direct or indirect damages, however

caused and on any theory of liability, arising from this warranty

and sale. These limitations shall apply not with standing any failure

of essential purpose of any limited remedy.

Australia Warranty

This document details the terms and conditions of the

warranty provided with this product. Please disregard any

other representations contained on this product‚ is packaging

or provided with this product, which constitute or appear to

constitute a warranty.

This warranty is offered by TNS Distribution Australia Pty Ltd,

Unit 1, 16 Aquatic Drive, Frenchs Forest NSW 2086 Australia,

(02) 9975 0900,support@tnsdistribution.com.au

Subject to the exclusions and limitations set out below, we

warrant to you that if you purchase a product directly from

us, or from any of our authorised resellers, that it will not

contain defects which are a result of faulty manufacturer

workmanship or materials. This warranty subsists for 1 year

from the date of purchase.

Subject to any rights you have under the Australian Consumer

Law, we will not be liable for defects which are a result of

damage or loss caused by factors beyond our control, any

product which has not been maintained according to any

care or maintenance instructions provided with the product,

any alterations to a product which are not performed by us,

or damage or defects caused to the product due to unusual

or non-recommended use. We will not be liable for any special,

indirect, consequential or economic loss or damage or loss of

profits whatsoever suffered

Specifications

Australia Warranty(continued)

by you or any other person resulting from any act or omission

by us. Our total liability in respect of this Warranty against

Defects is limited to the replacement of the goods.

Any claim made under this warranty must be made by returning

the defective goods to us, at your expense. Please provide details

of the defect and evidence of purchase to support@tnsdistribution.com.au

and we will provide instructions on how to obtain a replacement.

If you do not have Internet access please telephone us for further

instructions.

This Warranty against Defects is provided in addition to other

rights and remedies that you may have at law. Our goods come

with guarantees that cannot be excluded under the Australian

Consumer Law. You are entitled to a replacement or refund for

a major failure and for compensation for any reasonably for

eseeable loss or damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of acceptable quality

and the failure does not amount to a major failure.

• Suitable for various models of iPad, Cell phone, iPhone, iPod, MP3

& GPS

• Maximum holding device width: 8 Inches

• Minimum holding device width: 3 1/2 Inches

Hardware Basics

Holder grip

release button

Cradle support

stand

Mounting

Hook

Hook Knob

Hinge Knob

90º

www.macally.com