Samsung RF28HMELBSR Manuel utilisateur

Refrigerator

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

Free Standing Appliance

DA68-03055A-08.indb 1 2016. 3. 30. �� 2:43

English - 2

Safety information

SAFETY INFORMATION

Before using your new Samsung French Door

Refrigerator, please read this manual thoroughly to

ensure that you know how to operate the features

and functions that your new appliance offers safely

and efﬁciently.

This appliance is not intended for use by persons

(including children) with reduced physical,

sensory, or mental capabilities, or those who lack

experience and knowledge, unless they have been

given supervision or instruction concerning the use

of the appliance by a person responsible for their

safety.

Because the following instructions cover various

models, the characteristics of your refrigerator may

differ slightly from the refrigerator described in this

manual.

If you have any question, contact us at

1-800-SAMSUNG or ﬁnd help and information

online at www.samsung.com.

Important safety symbols and

precautions:

WARNING

Hazards or unsafe practices that may result in

severe personal injury or death.

CAUTION

Hazards or unsafe practices that may result in

minor personal injury or property damage.

Do NOT attempt.

Do NOT disassemble.

Do NOT touch.

Follow directions carefully.

Unplug the power plug from the wall

socket.

Make sure the refrigerator is grounded to

prevent electric shock.

Call the contact center for help.

Note.

These warning symbols are here to prevent

injury to you and others.

Please follow them carefully.

After reading this section, keep it in a safe

place for future reference.

Contents

SAFETY INFORMATION ……………………………………………………………… 2

SETTING UP YOUR FRENCH DOOR REFRIGERATOR ………………………… 11

OPERATING YOUR FRENCH DOOR REFRIGERATOR ………………………… 21

TROUBLESHOOTING ……………………………………………………………… 109

SAMSUNG SMART HOME SETTING GUIDE …………………………………… 112

This smart refrigerator supports from Samsung Smart Home.

More detailed information, please visit www.samsung.com

DA68-03055A-08.indb 2 2016. 3. 30. �� 2:43

English - 3

SAFETY INFORMATION

WARNING

STATE OF CALIFORNIA

PROPOSITION 65 WARNING

(US ONLY)

• This product contains chemicals known to the

State of California to cause cancer and birth

defects or other reproductive harm.

WARNING

CRITICAL INSTALLATION

WARNINGS

• Do not install the refrigerator in a damp

location or place where it may come in

contact with water.

- Deteriorated insulation on electrical parts may

cause an electric shock or ﬁre.

• Do not place this refrigerator in direct sunlight

or expose it to the heat from stoves, room

heaters, or other appliances.

• Do not plug several appliances into the same

multiple power strip.

The refrigerator should always be plugged into

its own individual electrical outlet which has a

voltage rating that matches the voltage listed

on the refrigerator’s rating plate.

- This provides the best performance and

also prevents overloading of house wiring

circuits, which could cause a ﬁre hazard from

overheated wires.

• If the wall socket is loose, do not insert the

power plug.

- There is a risk of electric shock of ﬁre.

• Do not use a power cord that has cracks or

abrasion damage along its length or at either

end.

• Do not bend the power cord excessively or

place heavy objects on it.

• Do not twist or tie the power cord.

• Do not hook the power cord over a metal

object, place a heavy object on the power

cord, insert the power cord between objects, or

push the power cord into the space behind the

appliance.

• When moving the refrigerator, be careful not to

roll over or damage the power cord.

- This may result in an electric shock or ﬁre.

• Never unplug your refrigerator by pulling on the

power cord.

Always grip the plug ﬁrmly and pull straight out

from the outlet.

- Damage to the cord may cause a short-circuit,

ﬁre, and/or electric shock.

• Do not use aerosols near the refrigerator.

- Using aerosols near the refrigerator may cause

an explosion or ﬁre.

• Do not install this appliance near a heater or

inﬂammable material.

• Do not install this appliance in a humid, oily,

or dusty location , or in a location exposed to

direct sunlight or water (rain, etc.).

• Do not install this appliance in a location where

gas may leak.

- This may result in an electric shock or ﬁre.

• This refrigerator must be properly

located and installed in accordance

with the instructions in this manual

before you use it.

• Connect the power plug in the proper position

with the cord hanging down.

- If you connect the power plug upside down, the

wire can get cut off and cause a ﬁre or electric

shock.

• When moving the refrigerator, be careful not to

roll over or damage the power cord.

- This constitutes a ﬁre hazard.

• Make sure that the power plug is not crushed

or damaged by the back of the refrigerator.

• Keep the packing materials out of reach of

children.

- There is a risk of death from suffocation if a

child puts the packing materials on his or her

head.

• The appliance must be positioned so that the

plug is accessible after installation.

- Failing to do so may result in an electric shock

or ﬁre due to electric leakage.

• You need to remove all the protective plastic

ﬁlm before you initially plug the product in.

• If your refrigerator comes with fasteners used

to level the doors, keep them out of reach of

children. Do not let children play with them.

- There is a risk of death from suffocation if a

DA68-03055A-08.indb 3 2016. 3. 30. �� 2:43

English - 4

child swallows a fastener.

• The refrigerator must be safely

grounded.

- Always make sure that you have grounded the

refrigerator before attempting to investigate or

repair any part of the appliance.

Power leakages can cause severe electric

shock.

• Never use gas pipes, telephone lines, or other

potential lightning attractors as an electrical

ground.

- Improper use of the grounding plug can result

in a risk of electric shock.

If it is necessary to use an extension cord, use

only a 3-wire extension cord that has a 3-blade

grounding plug and a 3-slot receptacle that will

accept the plug on the appliance.

The marked rating of the extension cord should

be AC 115-120 V, 10 A, or more.

If a grounding adapter is used, make sure the

receptacle box is fully grounded.

• Plug the power plug into the wall socket ﬁrmly.

Do not use a damaged power plug, damaged

power cord, or loose wall socket.

- This may result in an electric shock or ﬁre.

• If the power cord is damaged,

have it replaced immediately by the

manufacturer or one of its service

agents.

CAUTION

INSTALLATION CAUTIONS

• Allow sufﬁcient space around the

refrigerator and install it on a ﬂat

surface.

- Keep the ventilation space in the appliance

enclosure or mounting structure clear of

obstructions.

• Allow the appliance to stand for 2 hours before

loading foods after installation and turning on.

• We strongly recommend you have a qualiﬁed

technician or service company install the

refrigerator.

- Failing to do so may result in an electric shock,

ﬁre, explosion, problems with the product, or

injury.

WARNING

CRITICAL USAGE WARNINGS

• Do not insert the power plug into a wall

socket with wet hands.

• Do not store articles on the top of the

appliance.

- When you open or close the door, the articles

may fall and cause personal injury and/or

material damage.

• Do not insert hands, feet or metal objects (such

as knives, etc.) into the bottom or the back of

the refrigerator.

- This may result in an electric shock or injury.

- Any sharp edges may cause a personal injury

• Do not put a container ﬁlled with water on the

refrigerator.

- If spilled, there is a risk of ﬁre or electric shock.

• Children should be supervised to ensure that

they do not play with the appliance.

- Keep ﬁngers out of “pinch point” areas.

Clearances between the doors and cabinet are

necessarily small. Be careful when you open

the doors if children are in the area.

• Do not let children hang on the door.

A serious injury may occur.

• Do not let children go inside the refrigerator.

They could become trapped.

• Do not insert your hands into the bottom area

under the appliance.

- Any sharp edges may cause personal injury.

• Do not let children step on a drawer cover.

- The drawer may break and cause them to slip.

• Do not overﬁll the refrigerator with food.

- When you open the door, an item may fall out

and cause personal injury or material damage.

• Do not touch the inside walls of the freezer or

products stored in the freezer with wet hands.

- This may cause frostbite.

• Never put ﬁngers or other objects into the water

dispenser hole, ice chute, or ice maker bucket.

- It may cause personal injury or material

damage.

• Do not use or place any substances sensitive

DA68-03055A-08.indb 4 2016. 3. 30. �� 2:43

English - 5

SAFETY INFORMATION

to temperature such as inﬂammable sprays,

inﬂammable objects, dry ice, medicine, or

chemicals near or inside the refrigerator.

• Do not keep volatile or inﬂammable objects

or substances (benzene, thinner, propane

gas, alcohol, ether, LP gas, and other such

products) in the refrigerator.

- This refrigerator is for storing food only.

- This may result in ﬁre or explosion.

• Do not store pharmaceutical products, scientiﬁc

materials, or temperature sensitive products in

the refrigerator.

- Products that require strict temperature

controls must not be stored in the refrigerator.

• Do not place or use an electrical appliance

inside the refrigerator, unless it is of a type

recommended by the manufacturer.

• Do not stand on top of the appliance or place

objects (such as laundry, lighted candles,

lighted cigarettes, dishes, chemicals, metal

objects, etc.) on the appliance.

This may result in an electric shock, ﬁre,

problems with the product, or injury.

Do not put a container ﬁlled with water on the

appliance.

- If spilled, there is a risk of ﬁre or electric shock.

• Do not use mechanical devices or any other

means to accelerate the defrosting process,

other than those recommended by the

manufacturer.

• Do not damage the refrigerant circuit.

• Do not spray volatile material such as

insecticide onto the surface of the appliance.

- As well as being harmful to humans, it may also

result in an electric shock, ﬁre, or problems with

the product.

• Never stare directly at the UV LED lamp for long

periods of time.

- This may result in eye strain due to the

ultraviolet rays.

• Do not attempt to repair, disassemble,

or modify the appliance yourself.

• Do not use any fuse (such as cooper, steel wire,

etc.) other than a standard fuse.

• If your appliance needs to be repaired or

reinstalled, contact your nearest service center.

- Failing to do so may result in an electric shock,

ﬁre, problems with the product, or injury.

• If the interior or exterior LED lamp has gone

out, please contact your nearest service center.

• Children should be supervised to

ensure that they do not play with the

appliance.

- Keep ﬁngers out of “pinch point” areas. :

Clearances between the doors and cabinet are

necessarily small.

Be careful when you open the doors if children

are in the area.

• Do not let children hang on the door.

A serious injury may occur.

• Do not let children go inside the refrigerator.

They could become trapped.

• Bottles should be stored tightly together so that

they do not fall out.

• This product is intended only for the storage of

food in a domestic environment.

• If a gas leak is detected, avoid any naked

ﬂames or potential sources of ignition, and air

the room in which the appliance is standing for

several minutes.

- Do not touch the appliance or power cord.

- Do not use a ventilating fan.

- A spark may result in an explosion or ﬁre.

• Use only the LED Lamps provided by the

manufacturer or its service agents.

• If the refrigerator emits a burning smell

or smoke, unplug the refrigerator

immediately and contact your

Samsung Electronics service center.

• If you experience difﬁculty changing a non-LED

light, contact a Samsung service center.

• If the product is equipped with LED Lamps, do

not disassemble the Lamp Covers and LED

Lamps yourself.

- Please contact your service agents.

• If dust or water enters the refrigerator, unplug

the refrigerator and contact your Samsung

Electronics service center.

- There is a risk of ﬁre.

DA68-03055A-08.indb 5 2016. 3. 30. �� 2:43

English - 6

CAUTION

USAGE CAUTIONS

• Do not re-freeze frozen foods that have

thawed completely.

Do not place carbonated or ﬁzzy drinks

in the freezer compartment.

Do not put bottles or glass containers

in the freezer.

- When the contents freeze, the glass may break

and cause personal injury.

• Use only the ice maker provided with the

refrigerator.

• Have the refrigerator’s water supply connected

only to a potable water supply.

To operate the ice maker properly, water

pressure of 20 ~ 125psi (138 ~ 862kPa) is

required.

If you will be away from home for a long period

of time (on vacation, for example) and won’t

be using the water or ice dispensers, close the

water valve.

- Otherwise, water leakage may occur.

• If you won’t be using the refrigerator for a very

long period of time, (3 weeks or more) empty

the refrigerator including ice bucket, unplug it,

close the water valve, wipe excess moisture

from the inside walls, and leave the doors open

to prevent odors and mold.

• Service Warranty and Modiﬁcation.

• Any changes or modiﬁcations

performed by a 3rd party on this

ﬁnished appliance are not covered

under Samsung warranty service, nor is

Samsung responsible for safety issues

that result from 3rd party modiﬁcations.

• Do not block the air vents inside the refrigerator.

- If the air vents are blocked, especially with a

plastic bag, the refrigerator can be over cooled.

If this cooling period lasts too long, the water

ﬁlter may break and cause water leakage.

• If the refrigerator is disconnected from the

power supply, you should wait for at least ﬁve

minutes before plugging it back in.

• If you have a long vacation planned or do not

intend to use the refrigerator for a long period

of time, empty the refrigerator including ice

bucket, pull out the power plug, wipe excess

moisture from the inside walls, and leave the

doors open to prevent odors and mold.

• To get the best performance from the product:

- Do not place food too close to the vents at the

rear of the appliance as it can obstruct free air

circulation in the refrigerator compartment.

- Wrap food up properly or place it in airtight

containers before putting it into the refrigerator.

- Do not place glasses, bottles, or carbonated

beverages in the freezer.

These items may freeze and break.

Broken glasses, bottles, and beverage

containers can cause injury.

- Please observe maximum storage times and

expiration dates of frozen goods.

- There is no need to disconnect the refrigerator

from the power supply if you will be away for

less than three weeks.

However, if you will be away for more than three

weeks, remove all the food and ice in the ice

bucket, unplug the refrigerator, close the water

valve, wipe excess moisture from the inside

walls, and leave the doors open to prevent

odors and mold.

• Fill the water tank and ice cube trays with

potable water only (tap water, mineral water, or

puriﬁed water).

- Do not ﬁll the tank with tea or a Sports drink.

This may damage the refrigerator.

• Do not strike or apply excessive force to any

glass surface.

- Broken glass may result in a personal injury

and/or property damage.

• If the product is ﬂooded, make sure to

contact your nearest service center.

- There is a risk of electric shock or ﬁre.

DA68-03055A-08.indb 6 2016. 3. 30. �� 2:43

English - 7

SAFETY INFORMATION

CAUTION

CLEANING CAUTIONS

• Do not spray water directly on the

inside or outside the refrigerator.

- There is a risk of ﬁre or electric shock.

• Do not use a hair dryer to dry the inside of the

refrigerator.

• Do not place a lighted candle in the refrigerator

to remove bad odors.

- This may result in an electric shock or ﬁre.

• Use a clean, dry cloth to remove any

foreign matter or dust from the power

plug blades.

Do not use a wet or damp cloth when

cleaning the plug.

- Otherwise, there is a risk of ﬁre or electric

shock.

• Before cleaning or performing

maintenance, unplug the appliance

from the wall socket.

- Failing to do so may result in an electric shock

or ﬁre.

WARNING

CRITICAL DISPOSAL WARNINGS

• DANGER : Risk of child entrapment.

Before you throw away your old

refrigerator or freezer:

- Take off the doors and door latch.

- Leave the shelves in place so that children

cannot easily climb inside.

- Children trapped inside a refrigerator can hurt

themselves or suffocate to death.

• Please dispose of the packaging material from

this product in an environmentally friendly

manner.

• Ensure that none of the pipes on the back of

the appliance are damaged prior to disposal.

• R-600a or R-134a is used as a refrigerant.

Check the compressor label on the rear of

the appliance or the rating label inside the

fridge to see which refrigerant is used for your

refrigerator.

If this product contains ﬂammable gas

(Refrigerant R-600a), contact your local

authority in regard to safe disposal of this

product.

• When disposing of this refrigerator, remove the

door/door seals and door latch so that small

children or animals cannot become trapped

inside.

Children should be supervised to ensure that

they do not play with the appliance.

If trapped inside, the child may get hurt or

suffocate to death.

• Cyclopentane is used in the insulation.

The gases in the insulation material require a

special disposal procedure.

Please contact your local authorities in regard

to the environmentally safe disposal of this

product.

• Keep all packaging materials well out of the

reach of children, as packaging materials can

be dangerous to children.

- If a child places a bag over his or her head, the

child could suffocate.

DA68-03055A-08.indb 7 2016. 3. 30. �� 2:43

English - 8

ADDITIONAL TIPS FOR

PROPER USAGE

• In the event of a power failure, call the local

ofﬁce of your Electricity Company and ask how

long it is going to last.

- Most power failures that are corrected in an

hour or two will not affect your refrigerator

temperatures.

However, you should minimize the number of

door openings while the power is off.

- Should the power failure last more than

24 hours, remove and discard all frozen food.

• The appliance might not operate consistently

(frozen contents can thaw or temperatures

can become too warm in the frozen food

compartment) when sited for an extended

period of time in a location where ambient

air temperatures are constantly below the

temperatures for which the appliance is

designed.

• In case of particular foods, keeping it under

refrigeration can have a bad effect on

preservation due to its properties.

• Your appliance is frost free, which means there

is no need to manually defrost your appliance.

This will be carried out automatically.

• Temperature rise during defrosting complies

with ISO requirements.

But If you want to prevent an undue rise in the

temperature of frozen food while the appliance

defrosts, wrap the frozen food in several layers

of newspaper.

• Do not re-freeze frozen foods that have thawed

completely.

Saving Energy Tips

- Install the appliance in a cool, dry room with

adequate ventilation.

Ensure that it is not exposed to direct sunlight

and never put it near a direct source of heat (a

radiator, for example).

- Not to block any vents and grilles is

recommended for energy efﬁciency.

- Allow warm food to cool down before placing it

in the appliance.

- Put frozen food in the refrigerator to thaw.

You can then use the low temperatures of the

frozen products to cool food in the refrigerator.

- Do not keep the door of the appliance open for

too long when putting food in or taking food

out.

The shorter the time the door is open, the less

frost build-up you’ll have in the freezer.

- It is recommended to install the refrigerator

with clearance to the back and sides. This will

help reduce power consumption and keep your

energy bills lower.

DA68-03055A-08.indb 8 2016. 3. 30. �� 2:43

English - 9

1. Regulatory Notice

1.1 FCC Notice

FCC CAUTION:

Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Contains Transmitter Module FCC ID: A3LWIDT30Q

This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received including interference that cause undesired

operation.

For product available in the USA/Canada market, only channel 1~11 can be operated.

Selection of other channels is not possible.

FCC STATEMENT:

This equipment has been tested and found to comply within the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a different circuit from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20cm(7.87 inch) between

the radiator and your body. This device and its antenna(s) must not be co-located or operation in

conjunction with any other antenna or transmitter.

Any changes or modiﬁcations not expressly approved by the manufacturer could void the user’s authority

to operate this equipment.

CAUTION

SAVE THESE INSTRUCTIONS

DA68-03055A-08.indb 9 2016. 3. 30. �� 2:43

English - 10

1. Regulatory Notice

1.2 IC Notice

Contains Transmitter Module IC: 649E-WIDT30Q

This device complies with Industry Canada lincence-exempt RSS standard(s).

Operation is subject to the following two conditions :

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of

the device.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada.

For product available in the USA/Canada market, only channel 1~11 can be operated.

Selection of other channels is not possible.

IC RADIATION EXPOSURE STATEMENT:

This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20 cm(7.87 inch)

between the radiator & your body. This device and its antenna(s) must not be co-located or operation in

conjunction with any other antenna or transmitter.

SAVE THESE INSTRUCTIONS

DA68-03055A-08.indb 10 2016. 3. 30. �� 2:43

English - 11

SETTING UP

GETTING READY TO INSTALL

THE REFRIGERATOR

Congratulations on your purchase of this Samsung

French Door Refrigerator.

We hope you enjoy the state-of-art features and

efﬁciencies that this new appliance offers.

Selecting the best location for the

refrigerator

Choose:

• A location with easy access to a water supply.

• A location without direct exposure to sunlight.

• A location with a level ﬂoor.

• A location with enough space for the

refrigerator doors to open easily.

• A location that provides sufﬁcient space to the

right, left, back, and top for air circulation.

• A location that allows you to move the

refrigerator easily if it needs maintenance or

service.

• Do not install the refrigerator in locations where

the temperature is over 110 °F (43 °C) or below

50 °F (10 °C ).

• Do not locate the refrigerator where it may

become wet.

If the refrigerator does not have enough space,

it can cause the bad inﬂuence to refrigeration

efﬁciency and power consumption.

If your refrigerator has an ice maker, allow extra

space at the back for the water line connections.

Important: Make sure that you can easily move

your refrigerator to its ﬁnal location by measuring

doorways (both width and height), thresholds,

ceilings, stairways, etc.

The following chart details the exact height and

depth of this Samsung French Door Refrigerator.

AA

B

C

D

E

Model RF28HM**

Depth “A” 34” (864mm)

Width “B” 35 6/8” (908mm)

Height “C” 68 7/8” (1749mm)

Overall Height “D” 70” (1777mm)

Depth “E” 36 1/2” (926mm)

62 1/8"

(1578mm)

13 2/8"

(335mm)

125° 125°

2" (50mm)

35 3/4" (908mm)

29 3/8"

(748mm)

48 1/4" (1226mm)

4 6/8" (122mm)

2 3/8" (61mm)

53" (1346mm)

Each measurement based on the design

dimension, so it may differ depending on

the measuring method.

Setting up your French Door

Refrigerator

DA68-03055A-08.indb 11 2016. 3. 30. �� 2:43

English - 12

CAUTION

When moving your refrigerator

To prevent ﬂoor damage, be sure the front

adjusting legs are in the up position (above the

ﬂoor).

Refer to ‘Adjusting the Level’ on page 17.

Flat-blade screw

driver (-)

Control Lever

Flooring

For proper installation, you must place this

refrigerator on a level, hard surface that is the

same height as the rest of the ﬂoor.

This surface should be strong enough to support a

fully loaded refrigerator.

To protect the ﬁnish of the ﬂooring, cut a large

section of the cardboard carton and place it under

the refrigerator where you are working.

When moving the refrigerator, you need to pull and

push it straight forwards or back.

Do not wiggle it from side to side.

REMOVING THE REFRIGERATOR

DOORS

For some installations, you need to remove the

fridge and freezer drawers so you can move the

refrigerator to its ﬁnal location.

Do not remove the doors/drawer if you don’t

need to.

If you do not need to remove the refrigerator doors

or drawers, go to ‘Leveling the Refrigerator’ on

page 17. If you need to remove the doors and

drawers. continue below.

Before removing the doors or drawers, make sure

you read the following warnings:

WARNING

Disconnect power to the refrigerator before

removing the door or drawer.

• Be careful not to drop, damage

or scratch the door / drawer while

removing them.

• Be careful not to injure yourself while removing

the doors/drawer.

• Reattach the door/drawer properly to avoid:

- Moisture from air leakage.

- Uneven door alignment.

- Wasting energy due to improper door seal.

DA68-03055A-08.indb 12 2016. 3. 30. �� 2:44

English - 13

SETTING UP

WARNING

Disassembling the refrigerator doors

Be careful not to drop and scratch the doors while

removing them.

Required Tools (Not provided)

You need the following tools to complete the

installation of your refrigerator:

Philips

screwdriver (+)

Flat-blade screw

driver (-)

Socket wrench

(13/32”) (10mm)

Pliers

Allen wrench

(3/16”) (5mm)

With the door opened

1. Remove 3 screws holding down the TOP

TABLE (1) and separate the connected wires.

(1)

2. Disconnect two connectors (2) on the left side

door. To remove the water coupler from the

hinge, twist and pull it from the hinge.

Remove the water line (3) while pressing the

marked part (4) of the water line coupler.

(2)

(3)

(4)

3. Pull and remove the hinge lever (5). Remove

the ground screw (6) attached to the upper

left door hinges with a philips screwdriver (+).

Remove the upper left and right door hinges

(7).

(5)

(7)

(6)

DA68-03055A-08.indb 13 2016. 3. 30. �� 2:44

English - 14

4. Lift the door straight up to remove.

5. Remove the screw (8) attached to the

lower left and right door hinges with a philips

screwdriver (+).

Remove the 2 hex head bolts (9) attached to

the lower left and right door hinges with an allen

wrench (3/16”).

Remove the lower left and right door hinges

(10).

Allen wrench

(10)

(8)

(9)

REATTACHING THE

REFRIGERATOR DOORS

To reattach the fridge doors after you have moved

the fridge to its ﬁnal location, assemble the parts in

reverse order.

1. The Water Line must be fully inserted into the

center of the transparent coupler (Type A) or the

Guide Lines (Type B) to prevent water leakage

from the dispenser.

Center of Transparent

coupler

The Guide Lines

Dispenser

Type A Type B

DISASSEMBLING THE FLEX

DOOR

1. Take out the Flex Zone (1) by lifting it up.

(1)

2. Take off the cover (2) with the harness using a

ﬂat-blade screwdriver (-).

(2)

DA68-03055A-08.indb 14 2016. 3. 30. �� 2:44

English - 15

SETTING UP

3. Press the locking tab and separate the Wire

Connector.

4. Remove 1 hex head bolt from each side with a

socket wrench (10mm).

5. Lift up the Flex door from the rails.

RE-ASSEMBLING THE FLEX

DOOR

To reattach the Flex door after you have moved the

fridge to its ﬁnal location, assemble parts in reverse

order.

CAUTION

Be sure to connect the Flex Door Wire Connector.

If it is not connected, the Flex Room does not

work.

DISASSEMBLING THE FREEZER

DOOR

1. Take out the upper drawer by lifting it up.

2. Remove the freeze room guard (1) by lifting

the guard up.

(1)

DA68-03055A-08.indb 15 2016. 3. 30. �� 2:44

English - 16

3. Take out the lower basket (2) by lifting the

basket up from the rail system.

(2)

CAUTION

You can scratch the side of the bin if you twist it

left or right when disassembling or re-assembling

it.

4. Press the ﬁxing hook of the rail system.

5. Holding the top of the Freezer Drawer, pull it

out all the way, and then remove it from the rail

system.

CAUTION

Be careful not to scratch or dent the sliding rail by

letting it strike the ﬂoor.

CAUTION

Make sure that you mount the freezer basket in the

right position when removing / installing the freezer

door. Failing to do so may result in the door not

opening or closing properly.

RE-ASSEMBLING THE FREEZER

DOOR

To reattach the drawer after you have moved the

fridge to its ﬁnal location, assemble the parts in

reverse order.

DA68-03055A-08.indb 16 2016. 3. 30. �� 2:44

English - 17

SETTING UP

LEVELING THE REFRIGERATOR

Make sure the refrigerator is level so that you can

make ﬁnal adjustments.

Use a level to test if the refrigerator is level both

side to side and back to front.

If the refrigerator is not level, you will not be able

to get the doors perfectly even, which may cause

moisture condensation and increased energy bills.

Below is an example of how to level the refrigerator

if the left side of the refrigerator is lower than the

right side.

How to adjust the level

1. Open the freezer drawer and remove the lower

basket.

2. Insert a ﬂat-blade screwdriver (-) into the

notch on the left control lever, and then turn it

counter-clockwise to level the refrigerator. (You

turn the lever clockwise to lower the refrigerator

and counterclockwise to raise it.)

ﬂat-blade

screwdriver (-)

Control Lever

CAUTION

Both control levers must be touching the ﬂoor to

avoid possible personal injury or property damage

because of tipping.

If the right side is lower, perform the same

procedure, but with the right control lever.

It is difﬁcult to remove the cover leg

front from the refrigerator, so we do not

recommend making small adjustments

with the control lever.

Instead, refer to the next page for the best

way to make minor adjustments to the

doors.

MAKING MINOR ADJUSTMENTS

TO THE DOORS

A leveled refrigerator is necessary for getting the

doors perfectly even. For leveling instructions,

review the previous section on leveling the

refrigerator.

Adjustment part

Fixed part

The left door is ﬁxed.

To make minor adjustments to the doors,

adjust only the right door.

1. Pull out the Convertible door (1) to expose the

lower hinge (2).

2. Insert a philips screwdriver (+) (3) into the shaft

(4) of the lower hinge.

3. Adjust the height by turning a philips

screwdriver (+) (3) clockwise (

DOWN

) or

counterclockwise (

UP

).

(3)

(1)

(3)

(2)

(4)

When you turn a philips screwdriver (+)

counterclockwise ( ), the door will

move up.

DA68-03055A-08.indb 17 2016. 3. 30. �� 2:44

English - 18

INSTALLING THE WATER

DISPENSER LINE

A water dispenser with a ﬁlter is one of the helpful

features on your new refrigerator.

To help promote better health, the water ﬁlter

removes unwanted particles from your water.

However, it does not sterilize the water or destroy

microorganisms. You may need to purchase a

water purifying system to do that.

The water line also connects to the ice maker.

For the ice maker to operate properly, water

pressure of 20 ~ 125psi (138 ~ 862kPa) is

required.

If the refrigerator is installed in an area with low

water pressure (below 20psi), you can install a

booster pump to compensate for the low pressure.

After you have connected the water line, make

sure the water storage tank inside the refrigerator

is properly ﬁlled.

To do this, press the water dispenser lever until the

water runs from the water outlet.

Water line installation kits are available at

extra cost from your dealer.

We recommend using a water line

installation kit that contains copper tubing

and a ¼” compression nut.

Connecting to the water supply line

1. First, shut off the main water

supply.

2. Locate the nearest cold water drinking line and

install the pipe clamp and shut off valve.

Pipe clamp

Cold water line

Shut off valve

3. Connect the water line installation kit to the

shut off valve.

Shut off valve

Pipe clamp

Cold water line

Water line installation kit

DA68-03055A-08.indb 18 2016. 3. 30. �� 2:44

English - 19

SETTING UP

Connecting the water supply line to the

refrigerator

There are several items that you need to purchase

to complete this connection.

You may ﬁnd these items sold as a kit at your local

hardware store.

Use Copper Tubing Use Plastic Tubing

• ¼” copper tubing

• ¼” compression nut

(1pc)

• Ferrule (2pc)

• ¼” plastic tubing

→ Molded end (Bulb)

• ¼” compression nut

(1pc)

Compression Nut

(1/4”) (Assembled)

Ferrule

(Not supplied)

Plastic Tubing

(Assembled)

Compression

Fitting (Assembled)

Molded end

(Bulb)

Compression

nut (A) (1/4”)

(Not supplied)

or

Copper tubing

(Not supplied)

Plastic tubing (B)

(Not supplied)

Household water supply line

Refrigerator

1. Connect the household water line to the

assembled compression ﬁtting.

- If you are using copper tubing, slip the

compression nut (A) (not supplied) and

ferrule (not supplied) on the copper tubing (not

supplied) as shown.

- If you are using plastic tubing (B), insert the

molded end (Bulb) of the plastic tubing (B) into

the compression ﬁtting.

CAUTION

Do not use without the molded end (Bulb) of the

plastic tubing (B).

2. Tighten the compression nut (A) onto the

compression ﬁtting.

Do not over-tighten the compression nut (A) .

3. Turn the water on and check for any leakage.

If you ﬁnd water drops or leakage in the

connection areas, turn off the main water

supply. Check the connections and, if

necessary, tighten.

4. Flush 1 gallon of water through the ﬁlter before

drinking or using the water from the refrigerator.

(Flush approximately 6 minutes.)

To ﬂush, press a large glass or cup against the

water dispenser lever.

Fill the glass, empty it into the kitchen sink after

it is ﬁlled, and then repeat.

5. After you turn on the refrigerator, let the ice

maker make ice for 1 to 2 days.

Over that period of time, throw out the ﬁrst 1 or

2 buckets of ice the freezer makes to ensure all

impurities have been removed from the water

line.

Only connect the water line to a drinkable

water source.

If you have to repair or disassemble the

water line, cut off 1/4“ of the plastic tubing

to make sure you get a snug, leak-free

connection.

You can test the water line quickly using a

paper cup. Under normal conditions, the

water dispenser can ﬁll a 5.75oz. (170cc)

cup in about 10 seconds.

DA68-03055A-08.indb 19 2016. 3. 30. �� 2:44

English - 20

COMPLETING THE SET UP

Now that you have your new refrigerator installed

in place, you are ready to set up and enjoy the

features and functions of the appliance.

By completing the following steps, your refrigerator

should be fully operational.

1. Make sure your refrigerator is in an appropriate

location with reasonable clearance between it

and the wall. Refer to installation instructions in

this manual.

2. Once the refrigerator is plugged in, make sure

the interior light comes on when you open the

doors.

3. Set the Temperature control to the coldest

temperature and wait for an hour.

The freezer will get slightly chilled and the motor

will run smoothly.

Reset the refrigerator and freezer to the

temperatures you want.

4. After you plug the refrigerator in, it will

take a few hours to reach the appropriate

temperature.

You can store food and drinks in the refrigerator

after the temperature is sufﬁciently cool.

If condensation or water drops appear

on both sides of the fridge door’s central

part, turn the Energy Saver mode off after

removing the condensation.

(See the explanation of the Energy Saver

button in “Using the Control Panel” on

page 84.)

DA68-03055A-08.indb 20 2016. 3. 30. �� 2:44

La page est en cours de chargement...

Samsung RF28HMELBSR Manuel utilisateur

Samsung RF28HMELBSR Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents