Savox Communications Oy Ab Freedom BHS-701 Manuel utilisateur

Bluetooth

®

Wireless Stereo Headset

BHS -701

User Guide

BHS-701_Headset_US_UG.fm Page 0 Monday, August 14, 2006 1:02 PM

1

EN

BHS-701 sales package content

Overview of the product

a)

b)

c)

d)

8

BHS-701_Headset_US_UG.fm Page 1 Monday, August 14, 2006 1:02 PM

2

Product Specifications

Model: BHS-701

Size: 140 (L) x 166 (W) x 53 (H) mm

Weight: 83g

Talk time: Up to 12 h

Music playing time: Up to 10 h

Standby time: Up to 350 h

Charging time: Within 3.5h

Battery type: Li-Polymer battery

Bluetooth Standard: Bluetooth Spec. 1.2

Supported Bluetooth profiles: Handsfree 1.0 and Headset 1.1

A2DP, AVRCP

Connection: Point-to-point

Paired devices: Up to 8, one at a time

Operating distance: 10 meters

Operating temperature range: -20ºC to +55ºC

Storage temperature range: -20ºC to +55ºC

BHS-701_Headset_US_UG.fm Page 2 Monday, August 14, 2006 1:02 PM

3

EN

Contents

English ................................................................................................................4

Français ............................................................................................................15

Español .............................................................................................................27

Português ..........................................................................................................39

BHS-701_Headset_US_UG.fm Page 3 Monday, August 14, 2006 1:02 PM

4

Overview of the product

BHS-701 sales package content

(See page 1)

a) Stereo headset

b) Wall charger

c) User guide

d) Quick guide

e) Bluetooth dongle (market dependent)

Overview of the product (See page 1)

1. Indicator Light

Status indication with blue and red lights

2. Volume Down-button

Decreases the volume

3. Volume Up-button

Increases the volume

4. Multifunction-button

Power on/off, answer/end call, play/pause

music

5. Forward button

Forward to next song track

6. Backward button

Go back to the previous song track

7. Charging connector

8. How-to-wear the headset

Your Iqua BHS-701 is designed to be

comfortably worn behind your head with the

strap. The microphone is integrated in the

right earpiece.

BHS-701_Headset_US_UG.fm Page 4 Monday, August 14, 2006 1:02 PM

5

EN

Getting Started

Charging the battery

Before using BHS-701 for the first time, you must charge it for approximately 3.5 hours. When

the battery is fully charged, it provides up to 12 hours of talk time, 10 hours of music listening

time and up to 350 hours of standby time. Always use the charger provided in the sales

package.

1. Connect the charger cable to BHS-701.

2. Plug the charger into a wall socket. The red light will turn on.

3. When the battery is fully charged, the red light will turn off automatically.

Switching on and off

To switch on BHS-701

When the headset is powered off, press and hold the Multifunction -button until you hear a

sound and the blue light flashes.

To switch off BHS-701

When the headset is powered on, press and hold the Multifunction -button until you hear a

sound and the red light flashes once and then turns off.

BHS-701_Headset_US_UG.fm Page 5 Monday, August 14, 2006 1:02 PM

6

Pairing the BHS-701 and your mobile phone

Pairing is the process of linking BHS-701 with your compatible Bluetooth mobile phone*. After

this process is completed, you can use the BHS-701 with the paired mobile phone. If you want

to use the BHS-701 with another mobile phone, you must repeat the pairing process again.

Even though BHS-701 can be paired with up to 8 compatible phones it can only be connected

to one phone at a time. Once it is paired with 8 phones, the 9th paired device will replace the

1st paired device.

First time usage

When the BHS-701 is powered on for the very first time, it will enter pairing mode automatically

(blue and red lights flash alternately). Please follow the steps 3-6 below to pair your headset

with your phone.

Later on usage

After powered on, BHS-701 will automatically reconnect to the last-connected phone.

If the connection is failed due to phone not found, the headset will automatically enter into

pairing mode (blue and red lights flash alternately). Please follow the steps 3-6 below. If the

headset is not paired with any phone in 2 min. it will go to "powered on but no Bluetooth

connection" -mode (blue light flashes continuously). You can switch the headset off and switch

it on again.

* For latest compatibility information please visit www.iqua.com

BHS-701_Headset_US_UG.fm Page 6 Monday, August 14, 2006 1:02 PM

7

EN

To manually pair BHS-701 and your mobile phone:

1. When power is off, press and hold the Multifunction -button until you here a sound and the

blue and red lights start flashing alternately.

2. Release the button. BHS-701 is now in pairing mode.

3. Check your phone user guide for details on how to search and pair.

4. When phone has found the headset, it will show Iqua BHS-701 on its screen.

5. In order to pair with the phone, enter the PIN code of BHS-701, which is 0000.

6. After pairing, BHS-701 automatically connects with your mobile phone. Once pairing and

connection are succeeded, you will hear a sound and the blue light flashes every 3 seconds.

The headset is now ready to make and receive calls.

Disconnecting BHS-701 and your phone

To disconnect BHS-701 and the phone, simply switch off the headset.

Reconnecting the paired BHS-701 with the phone

To reconnect BHS-701 to the last phone used, simply switch on the headset and it will

automatically connect to the phone. If the connection is failed due to phone not found, the

headset will automatically enter into pairing mode (blue and red lights flash alternately).

Please see the pairing instruction in this user guide.

There are occasions when headset is temporarily out of Bluetooth operating range (up to

10 meters, e.g. user wearing the headset walks away from the phone), the headset will be

disconnected from the phone and user will hear a warning tone from the headset). Headset is

now in "powered on but no Bluetooth connection" -mode (blue light flashes continuously).

BHS-701_Headset_US_UG.fm Page 7 Monday, August 14, 2006 1:02 PM

8

Once the headset is back in range again, long press the Multifunction -button, the connection

will be re-formed. If the headset is out of range for less than 1 minute, it will reconnect to phone

automatically.

Call Functions

Answer a call

Press the Multifunction -button shortly to answer an incoming call. You will hear a sound

when the call is answered.

End a call

To end an active call, press shortly the Multifunction -button. You will hear a sound when the

call is ended.

Reject a call

When you receive an incoming call that you do not want to answer, press and hold the

Multifunction -button. You will hear a sound when call is rejected.

Redial the last dialed number

Press and hold the Multifunction -button until you hear a sound. Press and hold Multifunction

-button one more time until you hear a sound to dial the number.

BHS-701_Headset_US_UG.fm Page 8 Monday, August 14, 2006 1:02 PM

9

EN

Voice dialing (when supported by the phone)

To activate the voice dialing feature of your phone, shortly press Multifunction -button. When

you hear a sound, you can speak the voice tag. Refer to the user guide of your phone for

details. Some phone models do not support voice dialing.

Adjusting volume

Press the Volume Up -button to increase the volume. To decrease the volume, press Volume

Down -button.

Erase paired devices

The BHS-701 can be paired to up to 8 devices. Once it is already paired to 8 devices, the 9th

paired device will replace the 1st paired device. You can also erase the paired device list of

the headset in order to pair it with new devices. When headset is powered on, long press both

the Forward and Backward -buttons until you see purple LED light (the headset has erased

all previous paired device information).

Reset hardware

To reset the hardware, while the charger is plugged into the headset and headset is powered

on, shortly press both Volume Up and Volume Down- buttons simultaneously. The headset

will be powered off (light turns off) once the hardware is reset. You may do this hardware reset

and restart the headset in case the headset is jammed.

BHS-701_Headset_US_UG.fm Page 9 Monday, August 14, 2006 1:02 PM

10

Music functions

To Play

Make sure your headset is connected to mobile phone in Advanced Audio profile. Simply press

Multifunction -button to play the music on the headset.

To Pause

While listening to the music, press Multifunction -button to pause the music.

Skip one track forward

While listening to the music, press the Forward -button to change to the next song.

Skip one track back

While listening to the music, press the Backward -button to change to the previous song.

Fast forward

While listening to the music, press and hold the Forward -button.

Rewind

While listening to the music, press and hold the Backward -button.

BHS-701_Headset_US_UG.fm Page 10 Monday, August 14, 2006 1:02 PM

11

EN

Light indication summary

The BHS-701's LED lights can be blue or red and are usually accompanied by a sound signal.

• Blue light flashes continuously - power is on but no Bluetooth-connection.

• Blue light flashes every 3 second - headset in standby mode (paired and connected).

• Blue and red light flashing alternately - in pairing mode, waiting for user to complete

pairing with mobile phone.

• Red light flashes every 3 seconds - low battery.

• Red light on continuously - charging the battery.

Power Management

This product is powered by a built-in rechargeable battery which can not be changed. Do not

attempt to replace the battery. Rechargeable battery can be charged and discharged

hundreds of times, but it will eventually wear out. After a period of time that will vary depending

on the use and usage conditions you may find that the built-in battery will power your product

for only a couple of hours requiring you to charge more frequently.

Do charge your device only with the charger provided in the sales package. Unplug the

charger when not in use. Do not leave the device connected to the charger for longer period

than needed, since overcharging may shorten the battery lifetime.

If left unused a fully charged battery will discharge itself over time.

BHS-701_Headset_US_UG.fm Page 11 Monday, August 14, 2006 1:02 PM

12

Temperature extremes may affect the ability of the battery to charge. Always try to keep the

device between 15 °C and 25 °C (59 °F and 77 °F). Leaving the device in hot or cold places

such as in closed car in summer or winter conditions will reduce the capacity and lifetime of

the battery. A device with hot or cold battery may not work for a while even when the battery

is fully charged. Battery performance is particularly limited in temperatures well below

freezing. Do not charge in humid environment.

Care and Maintenance

– Do not expose the device to liquid, moisture or humidity as it is not waterproof.

– Do not use or store the device in dusty, dirty areas. Its moving parts and electronic

components can be damaged.

– Do not store the device in hot areas. High temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain plastics.

– Do not store the device in cold areas. When the device returns to its normal temperature,

moisture can form inside the device and damage electronic circuit boards.

– Do not drop, knock, or shake the device. Rough handling can break internal circuit boards

and fine mechanics.

– Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.

– Use a soft, clean, dry cloth to clean any lenses.

– Do not expose your device to contact with sharp objects as this will cause scratches and

damage.

– Do not stick anything inside the device as this may damage internal components.

BHS-701_Headset_US_UG.fm Page 12 Monday, August 14, 2006 1:02 PM

13

EN

– Do not dismantle the device or the charger as they do not contain serviceable parts and

taking apart the device may expose you to dangerous voltages or other hazards.

Act according to your local rules and do not dispose of this product as part of your

normal household waste. Dispose of this product in a separate collection system

meant for recycling of electrical and electronic products.

How to get service for my IQUA Product?

If you believe that you are entitled to a repair or replacement of your IQUA product based on

your statutory rights under the applicable national laws relating to the sale of consumer

products or warranty given by the retailer who has sold the IQUA Product to you, please

contact your retailer.

DECLARATION OF CONFORMITY

We, Iqua Ltd., declare under our sole responsibility, that the product, BHS-701, conforms with

the provisions of the following Council Directive: 1999/5/EC.

0560

BHS-701_Headset_US_UG.fm Page 13 Monday, August 14, 2006 1:02 PM

BHS-701_Headset_US_UG.fm Page 14 Monday, August 14, 2006 1:02 PM

FR

15

Présentation de l'appareil

Contenu du coffret de vente du BHS-701

(Voir page 1)

a) Casque stéréo

b) Chargeur

c) Manuel d'utilisation

d) Guide rapide

e) Clé Bluetooth (selon le marché)

Présentation de l'appareil (Voir page 1)

1. Voyant lumineux

Renseigne sur l’état dans lequel se trouve

l’appareil à l’aide d’une lumière bleue et d’une

lumière rouge

2. Touche de diminution du volume

Permet de diminuer le volume

3. Touche d'augmentation du volume

Permet d'augmenter le volume

4. Touche multifonction

Permet d'allumer/d'éteindre l'appareil, de

répondre/mettre fin aux appels ou de lire/

mettre sur pause la musique

5. Touche piste suivante

Permet de passer à la chanson suivante

6. Touche piste précédente

Permet de retourner à la chanson précédente

7. Connecteur de chargement

8. Comment porter le casque

Votre Iqua BHS-701 se porte confortablement

derrière votre tête. Le microphone est intégré

à l'écouteur de droite.

BHS-701_Headset_UG_fr.fm Page 15 Monday, August 14, 2006 1:00 PM

16

Présentation introductive

Chargement de la batterie

Avant d'utilisez le BHS-701 pour la première fois, vous devez le charger pendant environ

3 heures et 30 minutes. Lorsque la batterie est entièrement chargée, l'appareil a une

autonomie de 12 heures en conversation, de 10 heures en mode de lecture de musique et de

350 heures en veille. Utilisez toujours le chargeur fourni dans le coffret de vente.

1. Raccordez le câble du chargeur au BHS-701.

2. Branchez le chargeur dans une prise murale. La lumière rouge s’allume.

3. Une fois la batterie complètement chargée, le voyant rouge s’éteint automatiquement.

Mise en marche et arrêt

Pour mettre le BHS-701 en marche

Lorsque le casque est éteint, maintenez la touche multifonction enfoncée jusqu'à ce que

vous entendiez un signal sonore et que la lumière bleue se mette à clignoter.

Pour éteindre le BHS-701

Lorsque le casque est allumé, maintenez la touche multifonction enfoncée jusqu'à ce que

vous entendiez un signal sonore et que la lumière rouge clignote une fois puis s'éteigne.

BHS-701_Headset_UG_fr.fm Page 16 Monday, August 14, 2006 1:00 PM

17

FR

Mise en liaison du BHS-701 avec votre téléphone mobile

La mise en liaison est le processus qui consiste à établir un lien entre le BHS-701 et votre

téléphone mobile compatible Bluetooth*. Une fois ce processus achevé, vous pouvez utiliser

le BHS-701 avec le téléphone mobile lié. Si vous souhaitez utiliser le BHS-701 avec un autre

téléphone mobile, vous devez répéter le processus de liaison. Même s’il est possible de relier

jusqu’à 8 téléphones compatibles avec le BHS-701, ce dernier ne peut être connecté qu’à un

seul téléphone à la fois. Une fois la liaison établie avec 8 téléphones, le 9ème appareil lié

remplace le 1er appareil lié.

Première utilisation

Lorsque le BHS-701 est allumé pour la première fois, il entre en mode de mise en liaison

automatiquement (les lumières bleues et rouges clignotent alternativement). Suivez les

étapes 3 à 6 ci-dessous pour mettre en liaison le casque avec votre téléphone.

Utilisation ultérieure

Après sa mise en marche, le BHS-701 se reconnecte automatiquement au dernier téléphone

auquel il a été connecté.

Si la connexion échoue parce que le téléphone est introuvable, le casque entre

automatiquement en mode de mise en liaison (les lumières bleues et rouges clignotent

alternativement). Suivez les étapes 3 à 6 ci-dessous. Si le casque ne se lie à aucun téléphone

en l'espace de 2 minutes, il passe en mode "allumé mais sans connexion Bluetooth" (la

lumière bleue clignote en continu). Vous pouvez alors éteindre le casque puis le rallumer.

* Pour obtenir les dernières informations concernant les produits compatibles, consultez le site

www.iqua.com.

BHS-701_Headset_UG_fr.fm Page 17 Monday, August 14, 2006 1:00 PM

18

Pour lier manuellement le BHS-701 à votre mobile :

1. Lorsque l'appareil est éteint, maintenez la touche multifonction enfoncée jusqu'à ce que

vous entendiez un signal sonore et que les lumières bleue et rouge se mettent à clignoter

alternativement.

2. Relâchez la touche. Le BHS-701 est maintenant en mode de mise en liaison.

3. Consultez le manuel d'utilisation de votre téléphone pour obtenir des informations détaillées

sur la procédure de recherche et d’établissement d’une liaison.

4. Une fois que le téléphone a localisé le casque, il affiche Iqua BHS-701 sur son écran.

5. Afin d’établir la liaison, entrez le code PIN du BHS-701, c’est-à-dire le code 0000.

6. Après la liaison, le BHS-701 se connecte automatiquement à votre téléphone mobile. Une

fois la liaison et la connexion établies, vous entendez un signal sonore et la lumière bleue

clignote toutes les 3 secondes. Le casque est alors prêt à émettre et recevoir des appels.

Déconnexion du BHS-701 de votre téléphone

Pour déconnecter le BHS-701 du téléphone, il vous suffit d'éteindre le casque.

Rétablissement de la connexion entre le BHS-701 lié et votre téléphone

Pour rétablir la connexion entre le BHS-701 et le dernier téléphone utilisé, il vous suffit

d’allumer le casque pour qu’il se reconnecte automatiquement avec ce téléphone. Si la

connexion échoue parce que le téléphone est introuvable, le casque entre automatiquement

en mode de mise en liaison (les lumières bleues et rouges clignotent alternativement).

Reportez-vous aux instructions relatives au processus de liaison, dans le présent manuel.

BHS-701_Headset_UG_fr.fm Page 18 Monday, August 14, 2006 1:00 PM

La page charge ...

Savox Communications Oy Ab Freedom BHS-701 Manuel utilisateur

Ce manuel convient également à

Savox Communications Oy Ab Freedom BHS-701 Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents