AEG HK854326IB Manuel utilisateur

User Manual 2

Notice d'utilisation 20

Benutzerinformation 41

EN

FR

DE

HK854326IB

CONTENTS

1. SAFETY INFORMATION...........................................................................................3

2. SAFETY INSTRUCTIONS.......................................................................................... 4

3. PRODUCT DESCRIPTION........................................................................................ 6

4. DAILY USE..................................................................................................................8

5. HINTS AND TIPS..................................................................................................... 11

6. CARE AND CLEANING.......................................................................................... 13

7. TROUBLESHOOTING.............................................................................................13

8. INSTALLATION....................................................................................................... 16

9. TECHNICAL INFORMATION.................................................................................18

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

www.aeg.com

2

1. SAFETY INFORMATION

Before the installation and use of the appliance,

carefully read the supplied instructions. The

manufacturer is not responsible if an incorrect

installation and use causes injuries and damages. Always

keep the instructions with the appliance for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep all packaging away from children.

•

Keep children and pets away from the appliance when

it operates or when it cools down. Accessible parts are

hot.

• If the appliance has a child safety device, we

recommend you activate it.

• Cleaning and user maintenance shall not be made by

children without supervision.

• Children of less than 3 years should be kept away

unless continuously supervised.

1.2

General Safety

•

The appliance and its accessible parts become hot

during use. Do not touch the heating elements.

• Do not operate the appliance by means of an external

timer or separate remote-control system.

• Unattended cooking on a hob with fat or oil can be

dangerous and may result in fire.

• Never try to extinguish a fire with water, but switch off

the appliance and then cover flame e.g. with a lid or a

fire blanket.

ENGLISH

3

• Do not store items on the cooking surfaces.

• Metallic objects such as knives, forks, spoons and lids

should not be placed on the hob surface since they

can get hot.

• Do not use a steam cleaner to clean the appliance.

• After use, switch off the hob element by its control

and do not rely on the pan detector.

• If the glass ceramic surface/ glass surface is cracked,

switch off the appliance to avoid the possibility of

electric shock

• If the supply cord is damaged, it must be replaced by

the manufacturer, an authorized Service or similarly

qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Obey the installation instruction

supplied with the appliance.

• Keep the minimum distance from the

other appliances and units.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Seal the cut surfaces with a sealant to

prevent moisture to cause swelling.

• Protect the bottom of the appliance

from steam and moisture.

• Do not install the appliance adjacent

to a door or under a window. This

prevents hot cookware to fall from the

appliance when the door or the

window is opened.

• If the appliance is installed above

drawers make sure that the space,

between the bottom of the appliance

and the upper drawer, is sufficient for

air circulation.

• The bottom of the appliance can get

hot. Make sure to install a non-

combustile separation panel under

the appliance to prevent access to the

bottom.

• Make sure that the ventilation space

of 2 mm, between the worktop and

the front of the below unit, is free.

The warranty does not cover damages

caused by the lack of an adequate

ventilation space.

2.2 Electrical Connection

WARNING!

Risk of fire and electrical

shock.

• All electrical connections should be

made by a qualified electrician.

• The appliance must be earthed.

• Before carrying out any operation

make sure that the appliance is

disconnected from the power supply.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not contact

an electrician.

• Make sure the appliance is installed

correctly. Loose and incorrect

electricity mains cable or plug (if

applicable) can make the terminal

become too hot.

• Use the correct electricity mains

cable.

• Do not let the electricity mains cable

tangle.

www.aeg.com

4

• Make sure that a shock protection is

installed.

• Use the strain relief clamp on the

cable.

• Make sure the mains cable or plug (if

applicable) does not touch the hot

appliance or hot cookware, when you

connect the appliance to the near

sockets

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug (if applicable) or to the

mains cable. Contact an Authorised

Service Centre or an electrician to

change a damaged mains cable.

• The shock protection of live and

insulated parts must be fastened in

such a way that it cannot be removed

without tools.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• If the mains socket is loose, do not

connect the mains plug.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type

fuses removed from the holder), earth

leakage trips and contactors.

• The electrical installation must have

an isolation device which lets you

disconnect the appliance from the

mains at all poles. The isolation

device must have a contact opening

width of minimum 3 mm.

2.3 Use

WARNING!

Risk of injury, burns and

electrical shock.

• Remove all the packaging, labelling

and protective film (if applicable)

before first use.

• Use this appliance in a household

environment.

• Do not change the specification of

this appliance.

• Make sure that the ventilation

openings are not blocked.

• Do not let the appliance stay

unattended during operation.

• Set the cooking zone to “off” after

each use.

• Do not rely on the pan detector.

• Do not put cutlery or saucepan lids on

the cooking zones. They can become

hot.

• Do not operate the appliance with

wet hands or when it has contact with

water.

• Do not use the appliance as a work

surface or as a storage surface.

• If the surface of the appliance is

cracked, disconnect immediately the

appliance from the power supply. This

to prevent an electrical shock.

• Users with a pacemaker must keep a

distance of minimum 30 cm from the

induction cooking zones when the

appliance is in operation.

• When you place food into hot oil, it

may splash.

WARNING!

Risk of fire and explosion

• Fats and oil when heated can release

flammable vapours. Keep flames or

heated objects away from fats and oils

when you cook with them.

• The vapours that very hot oil releases

can cause spontaneous combustion.

• Used oil, that can contain food

remnants, can cause fire at a lower

temperature than oil used for the first

time.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

WARNING!

Risk of damage to the

appliance.

• Do not keep hot cookware on the

control panel.

• Do not let cookware to boil dry.

• Be careful not to let objects or

cookware fall on the appliance. The

surface can be damaged.

• Do not activate the cooking zones

with empty cookware or without

cookware.

• Do not put aluminium foil on the

appliance.

ENGLISH

5

• Cookware made of cast iron,

aluminium or with a damaged bottom

can cause scratches on the glass /

glass ceramic. Always lift these

objects up when you have to move

them on the cooking surface.

• This appliance is for cooking

purposes only. It must not be used for

other purposes, for example room

heating.

2.4 Care and cleaning

• Clean regularly the appliance to

prevent the deterioration of the

surface material.

• Deactivate the appliance and let it

cool down before you clean it.

• Disconnect the appliance from the

electrical supply before maintenance.

• Do not use water spray and steam to

clean the appliance.

• Clean the appliance with a moist soft

cloth. Only use neutral detergents. Do

not use abrasive products, abrasive

cleaning pads, solvents or metal

objects.

2.5 Disposal

WARNING!

Risk of injury or suffocation.

• Contact your municipal authority for

information on how to discard the

appliance correctly.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

3. PRODUCT DESCRIPTION

3.1 Cooking surface layout

300 mm

145 mm

1 1

211

1

Induction cooking zone

2

Control panel

3.2 Control panel layout

51 2

3

4

10

811 9 7

6

Use the sensor fields to operate the appliance. The displays, indicators and sounds tell

which functions operate.

www.aeg.com

6

Sensor

field

Function Comment

1

ON / OFF To activate and deactivate the hob.

2

Lock / The Child Safety

Device

To lock / unlock the control panel.

3

- Timer indicators of cook-

ing zones

To show for which zone you set the time.

4

- Timer display To show the time in minutes.

5

Power function To activate and deactivate the function.

6

- Heat setting display To show the heat setting.

7

- Control bar To set a heat setting.

8

/

- To increase or decrease the time.

9

- To select the cooking zone.

10

STOP+GO To activate and deactivate the function.

11

Bridge To activate and deactivate the function.

3.3 Heat setting displays

Display Description

The cooking zone is deactivated.

-

The cooking zone operates.

STOP+GO function operates.

Automatic Heat Up function operates.

Power function operates.

+ digit

There is a malfunction.

/ /

OptiHeat Control (3 step Residual heat indicator) : continue cooking /

keep warm / residual heat.

Lock / The Child Safety Device function operates.

Not correct cookware or too small or no cookware on the cooking

zone.

Automatic Switch Off function operates.

ENGLISH 7

3.4 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / There is a risk of

burns from residual heat.

The indicator shows the level

of the residual heat.

The induction cooking zones make the

heat necessary for cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat

of the cookware.

4. DAILY USE

WARNING!

Refer to Safety chapters.

4.1 Activating and

deactivating

Touch for 1 second to activate or

deactivate the hob.

4.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• All cooking zones are deactivated.

• You do not set the heat setting after

you activate the hob.

• You spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• The hob gets too hot (e.g. when, a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• You use incorrect cookware. The

symbol comes on and the cooking

zone deactivates automatically after 2

minutes.

• You do not deactivate a cooking zone

or change the heat setting. After

some time

comes on and the hob

deactivates. See below.

The relation between heat setting and

times of the function:

• , 1 — 3 — 6 hours

• 4 — 7 — 5 hours

• 8 — 9 — 4 hours

• 10 — 14 — 1.5 hours

4.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct

heat setting.

4.4 Using the cooking zones

Put the cookware on the cross / square

which is on the surface that you cook.

Cover the cross / square fully. Induction

cooking zones adapt to the dimension of

the bottom of the cookware

automatically. You can cook with the

large cookware on two cooking zones at

the same time.

4.5 Bridge function

This function connects two left side

cooking zones and they operate as one.

First set the heat setting for one of the

left side cooking zones.

To activate the function: touch . To

set or change the heat setting touch one

of the control sensors.

To deactivate the function: touch .

The cooking zones operate

independently.

When you use only one cooking zone of

the pair we recommend that you use the

rear cooking zone. Also when you use

www.aeg.com

8

large cookware we recommend that you

put it near to the rear cooking zone.

4.6 Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time.

The function sets the highest heat setting

for some time and then decreases to the

correct heat setting.

To activate the function the

cooking zone must be cold.

To activate the function for a cooking

zone: touch

( comes on).

Immediately touch the correct heat

setting. After 3 seconds comes on.

To deactivate the function: change the

heat setting.

4.7 Power function

This function makes more power

available to the induction cooking zones.

The function can be activated for the

induction cooking zone only for a limited

period of time. After this time the

induction cooking zone automatically

sets back to the highest heat setting.

Refer to “Technical

information” chapter.

To activate the function for a cooking

zone: touch . comes on.

To deactivate the function: change the

heat setting.

4.8 Timer

Count Down Timer

You can use this function to set how long

the cooking zone operates for only this

one time.

First set the cooking zone then set the

function. You can set the heat setting

before or after you set the function.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of

the timer to set the time (00 - 99

minutes). When the indicator of the

cooking zone starts to flash slowly the

time counts down.

To see the remaining time: set the

cooking zone with

. The indicator of

the cooking zone starts to flash quickly.

The display shows the remaining time.

To change the time: set the cooking

zone with

. Touch or .

To deactivate the function: set the

cooking zone with and touch . The

remaining time counts back to 00. The

indicator of the cooking zone goes out.

To deactivate the function you can also

touch and at the same time.

When the time comes to an

end, the sound operates and

00 flashes. The cooking

zone deactivates.

To stop the sound: touch .

CountUp Timer (The count up timer)

You can use this function to monitor how

long the cooking zone operates.

To set the cooking zone: touch

again and again until the indicator of a

necessary cooking zone comes on.

To activate the function: touch of

the timer.

comes on. When the

indicator of the cooking zone starts to

flash slowly the time counts up. The

display switches between and

counted time (minutes).

To see how long the cooking zone

operates: set the cooking zone with .

The indicator of the cooking zone starts

to flash quickly. The display shows how

long the zone operates.

To deactivate the function: set the

cooking zone with

and touch or

. The indicator of the cooking zone

goes out.

Minute Minder

You can use this function as a Minute

Minder when the hob is activated and

ENGLISH

9

the cooking zones do not operate (the

heat setting display shows ).

To activate the function: touch .

Touch or of the timer to set the

time. When the time comes to an end,

the sound operates and 00 flashes.

To stop the sound: touch .

The function has no effect

on the operation of the

cooking zones.

4.9 STOP+GO

This function sets all cooking zones that

operate to the lowest heat setting.

When the function operates, you cannot

change the heat setting.

The function does not stop the timer

functions.

To activate the function: touch .

comes on.

To deactivate the function: touch

.

The previous heat setting comes on.

4.10 Lock

You can lock the control panel while

cooking zones operate. It prevents an

accidental change of the heat setting.

Set the heat setting first.

To activate the function: touch .

comes on for 4 seconds.The Timer stays

on.

To deactivate the function: touch .

The previous heat setting comes on.

When you deactivate the

hob, you also deactivate this

function.

4.11 The Child Safety Device

This function prevents an accidental

operation of the hob.

To activate the function: activate the

hob with . Do not set the heat setting.

Touch for 4 seconds. comes on.

Deactivate the hob with .

To deactivate the function: activate the

hob with

. Do not set the heat setting.

Touch for 4 seconds. comes on.

Deactivate the hob with .

To override the function for only one

cooking time: activate the hob with

.

comes on. Touch for 4 seconds.

Set the heat setting in 10 seconds. You

can operate the hob. When you

deactivate the hob with the function

operates again.

4.12 OffSound Control

(Deactivation and activation of

the sounds)

Deactivate the hob. Touch

for 3

seconds. The display comes on and goes

out. Touch

for 3 seconds. or

comes on. Touch of the timer to

choose one of the following:

• - the sounds are off

•

- the sounds are on

To confirm your selection wait until the

hob deactivates automatically.

When the function is set to you can

hear the sounds only when:

• you touch

• Minute Minder comes down

• Count Down Timer comes down

• you put something on the control

panel.

4.13 Power limitation

Originally the hob is at the highest

possible power level.

To decrease or increase the power

level:

1. Deactivate the hob.

2. Touch

for 3 seconds. The display

comes on and goes off.

3. Touch

for 3 seconds. or

comes on.

4. Touch

. P0 comes on.

www.aeg.com

10

5. Touch / of the Timer to set the

power level.

Power levels

Refer to “Technical information” chapter.

• P0 — 7200 W

• P1 — 1500 W

• P2 — 2000 W

• P3 — 2500 W

• P4 — 3000 W

• P5 — 3500 W

• P6 — 4000 W

• P7 — 4500 W

• P8 — 5000 W

• P9 — 6000 W

CAUTION!

Make sure that the selected

power fits to the house

installation fuses.

4.14 Power management

function

• Cooking zones are grouped

according to the location and number

of the phases in the hob (see

illustration).

• Each phase has a maximum electricity

loading of 3700 W.

• The function divides the power

between cooking zones connected to

the same phase.

• The function activates when the total

electricity loading of the cooking

zones connected to a single phase

exceeds 3700 W.

• The function decreases the power to

the other cooking zones connected to

the same phase.

• The heat setting display of the

reduced zones changes between two

levels.

Power management function with

Power limitation function

When you set the Power limitation

function to 4.5 kW or less, power of the

hob is divided between all cooking

zones.

When you set the Power limitation

function to more than 4.5 kW, power of

the hob is divided between two cooking

zones in a pair.

5. HINTS AND TIPS

WARNING!

Refer to Safety chapters.

5.1 Cookware

For induction cooking zones

a strong electro-magnetic

field creates the heat in the

cookware very quickly.

Use the induction cooking

zones with correct cookware.

Cookware material

• correct: cast iron, steel, enamelled

steel, stainless steel, the bottom

made of multi-layer (with correct mark

from a manufacturer).

• not correct: aluminium, copper,

brass, glass, ceramic, porcelain.

Cookware is correct for an induction

hob if:

ENGLISH 11

• some water boils very quickly on a

zone set to the highest heat setting.

• a magnet pulls on to the bottom of

the cookware.

The bottom of the cookware

must be as thick and flat as

possible.

Cookware dimensions

Induction cooking zones adapt to the

dimension of the bottom of the

cookware automatically to some limit.

The cooking zone efficiency is related to

the diameter of the cookware. The

cookware with a smaller diameter than

the minimum receives only a part of the

power generated by the cooking zone.

Refer to “Technical

information” chapter.

5.2 The noises during

operation

If you can hear:

• crack noise: cookware is made of

different materials (sandwich

construction).

• whistle sound: you use one or more

cooking zones with high power levels

and the cookware is made of different

materials (sandwich construction).

• humming: you use high power levels.

• clicking: electric switching occurs.

• hissing, buzzing: the fan operates.

The noises are normal and do not refer

to hob malfunction.

5.3 Energy saving

• If it is possible, always put the lids on

the cookware.

• Put cookware on a cooking zone

before you start it.

• Use the residual heat to keep the

food warm or to melt it.

5.4 Öko Timer (Eco Timer)

To save energy, the heater of the

cooking zone deactivates before the

count down timer sounds. The difference

in the operation time depends on the

heat setting level and the length of the

cooking operation.

5.5 Examples of cooking

applications

The relation between the heat setting

and the cooking zone consumption of

power is not linear. When you increase

the heat setting it is not proportional to

the increase of the cooking zone

consumption of power. It means that the

cooking zone with the medium heat

setting uses less than a half of its power.

The data in the table is for

guidance only.

Heat setting Use to: Time Hints

- 1

Keep cooked food warm as nec-

essary

Put a lid on the cookware

1 - 3 Hollandaise sauce, melt: but-

ter, chocolate, gelatine

5 - 25

min

Mix from time to time

1 - 3 Solidify: fluffy omelettes,

baked eggs

10 - 40

min

Cook with a lid on

3 - 5 Simmer rice and milkbased

dishes, heating up ready-

cooked meals

25 - 50

min

Add the minimum twice as

much liquid as rice, mix milk

dishes part procedure through

5 - 7 Steam vegetables, fish, meat 20 - 45

min

Add some tablespoons of liq-

uid

www.aeg.com12

Heat setting Use to: Time Hints

7 - 9 Steam potatoes 20 - 60

min

Use max. ¼ l water for 750 g of

potatoes

7 - 9 Cook larger quantities of food,

stews and soups

60 - 150

min

Up to 3 l liquid plus ingredi-

ents

9 - 12 Gentle fry: escalope, veal cor-

don bleu, cutlets, rissoles,

sausages, liver, roux, eggs,

pancakes, doughnuts

as nec-

essary

Turn halfway through

12 - 13 Heavy fry, hash browns, loin

steaks, steaks

5 - 15

min

Turn halfway through

14 Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips

Boil large quantities of water. Power function is activated

6. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

6.1 General information

• Clean the hob after each use.

• Always use cookware with clean

bottom.

• Scratches or dark stains on the surface

have no effect on how the hob

operates.

• Use a special scraper for the glass.

• Use a special cleaner applicable for

the surface of the hob.

6.2 Cleaning of the hob

• Remove immediately: melted plastic,

plastic foil, and food with sugar. If not,

the dirt can cause damage to the hob.

Put the special scraper on the glass

surface at an acute angle and move

the blade on the surface.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration.

Clean the hob with a moist cloth and

some detergent. After cleaning, rub

the hob dry with a soft cloth.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Remedy

You cannot activate or oper-

ate the hob.

The hob is not connected to

an electrical supply or it is

connected incorrectly.

Check if the hob is correctly

connected to the electrical

supply. Refer to the connec-

tion diagram.

ENGLISH 13

Problem Possible cause Remedy

The fuse is released. Make sure that the fuse is

the cause of the malfunction.

If the fuse releases again

and again, contact a quali-

fied electrician.

Activate the hob again and

set the heat setting in less

than 10 seconds.

You touched 2 or more sen-

sor fields at the same time.

Touch only one sensor field.

STOP+GO function oper-

ates.

Refer to "Daily use" chapter.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactivated.

You put something on one

or more sensor fields.

Remove the object from the

sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from the

sensor field.

Residual heat indicator does

not come on.

The zone is not hot because

it operated only for a short

time.

If the zone operated suffi-

ciently long to be hot, speak

to an Authorised Service

Centre.

Automatic Heat Up function

does not operate.

The zone is hot. Let the zone become suffi-

ciently cool.

The highest heat setting is

set.

The highest heat setting has

the same power as the func-

tion.

The heat setting changes

between two levels.

Power management function

is activated.

Refer to "Daily use" chapter.

The sensor fields become

hot.

The cookware is too large or

you put it too near to the

controls.

Put large cookware on the

rear zones if possible.

There is no signal when you

touch the panel sensor

fields.

The signals are deactivated. Activate the signals.

Refer to "Daily use" chapter.

comes on.

Automatic Switch Off oper-

ates.

Deactivate the hob and acti-

vate it again.

www.aeg.com14

Problem Possible cause Remedy

comes on.

The Child Safety Device or

the Lock function operates.

Refer to "Daily use" chapter.

comes on.

There is no cookware on the

zone.

Put cookware on the zone.

The cookware is incorrect. Use the correct cookware.

Refer to “Helpful hints and

tips” chapter.

The diameter of the bottom

of the cookware is too small

for the zone.

Use cookware with correct

dimensions.

Refer to “Technical informa-

tion” chapter.

The cookware does not cov-

er the cross / square.

Cover the cross / square

fully.

and a number come on.

There is an error in the hob. Disconnect the hob from the

electrical supply for some

time. Disconnect the fuse

from the electrical system of

the house. Connect it again.

If comes on again, speak

to an Authorised Service

Centre.

comes on.

There is an error in the hob

because a cookware boils

dry. Automatic Switch Off

and the overheating protec-

tion for the zones operate.

Deactivate the hob. Remove

the hot cookware. After ap-

proximately 30 seconds, acti-

vate the zone again. If the

cookware was the problem,

the error message goes out.

Residual heat indicator can

stay on. Let the cookware

become sufficiently cool.

Check if your cookware is

compatible with the hob.

Refer to “Helpful hints and

tips” chapter.

7.2 If you cannot find a

solution...

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre. Give the

data from the rating plate. Give also

three digit letter code for the glass

ceramic (it is in the corner of the glass

surface) and an error message that

comes on. Make sure, you operated the

hob correctly. If not the servicing by a

service technician or dealer will not be

free of charge, also during the warranty

period. The instructions about the

Service Centre and conditions of

guarantee are in the guarantee booklet.

ENGLISH 15

8. INSTALLATION

WARNING!

Refer to Safety chapters.

8.1 Before the installation

Before you install the hob, write down

the information bellow from the rating

plate. The rating plate is on the bottom

of the hob.

Serial number ...........................

8.2 Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in

units and work surfaces that align to the

standards.

8.3 Connection cable

• The hob is supplied with the

connection cable.

• Replace the damaged mains cable

only with the spare parts cable. Speak

to your local Authorised Service

Center.

WARNING!

All electrical connections

must be made by a qualified

electrician.

CAUTION!

Do not drill or solder the

wire ends. This is strictly

forbidden!

CAUTION!

Do not connect the cable

without cable end sleeve.

Two-phase connection

1. Remove the cable end sleeve from

black and brown wires.

2. Remove an insulation of the brown

and black cable ends.

3. Apply a new wire end sleeve of 1.5

mm² on each cable end. (special tool

required).

Cable cross section

N

L1

N

L

230V~ 400V 2~N

L2

One-phase connection - 230 V~ Two-phase connection - 400 V 2 ~ N

Green - yellow Green - yellow

N Blue and grey Blue and grey N

L Black and brown Black L1

Brown L2

8.4 Attaching the seal to the

rabbet

1. Clean the rabbets in the worktop.

2. Cut the supplied seal stripe into 4

stripes. The stripes must have the

same length as the rabbets.

3. Cut the ends of the stripes at an

angle of 45°. They should fit in the

corners of the rabbets accurately.

4. Attach the stripes to the rabbets. Do

not extend the stripes. Do not bond

ends of stripes one over another.

www.aeg.com16

After you assemble the hob, seal the

remaining gap between glass ceramic

and the worktop with silicon. Make sure

the silicon does not get under the glass

ceramic.

8.5 Assembly

min.

50mm

min.

500mm

min.

2mm

< 20 mm

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min

30 mm

min. 500 mm

> 20 mm

min. 2 mm

A

B

A

12 mm

28 mm

38 mm

B

57 mm

41 mm

31 mm

min. 500 mm

774

+1

mm

514

+1

mm

490

+1

mm

min. 55mm

750

+1

mm

R10mm

R5mm

12mm

7mm

min.

38 mm

min.

2 mm

ENGLISH 17

min.

12 mm

min.

2 mm

8.6 Protection box

If you use a protection box (an additional

accessory), the front airflow space of 2

mm and the protective floor directly

below the hob are not necessary. The

protection box accessory may not be

available in some countries. Please

contact your local supplier.

You can not use the

protection box if you install

the hob above an oven.

9. TECHNICAL INFORMATION

9.1 Rating plate

Modell HK854326IB PNC 949 595 354 00

Typ 58 GBD CB AT 220 - 240 V 50 - 60 Hz

Induction 7.2 kW Made in Germany

Ser.Nr. ................. 7.2 kW

AEG

9.2 Cooking zones specification

Cooking zone Nominal power

(maximum heat

setting) [W]

Power function

[W]

Power function

maximum dura-

tion [min]

Cookware di-

ameter [mm]

Left front 2300 3200 10 125 - 210

Left rear 2300 3200 10 125 - 210

Middle front 1400 2500 4 125 - 145

Right rear 2400 3600 10 210 - 300

The power of the cooking zones can be

different in some small range from the

data in the table. It changes with the

material and dimensions of the

cookware.

For optimal cooking results use

cookware not larger than the diameter in

the table.

www.aeg.com18

10. ENVIRONMENTAL CONCERNS

Recycle the materials with the symbol .

Put the packaging in applicable

containers to recycle it. Help protect the

environment and human health and to

recycle waste of electrical and electronic

appliances. Do not dispose appliances

marked with the symbol with the

household waste. Return the product to

your local recycling facility or contact

your municipal office.

ENGLISH 19

TABLE DES MATIÈRES

1. CONSIGNES DE SÉCURITÉ................................................................................... 21

2. INSTRUCTIONS DE SÉCURITÉ.............................................................................. 22

3. DESCRIPTION DE L'APPAREIL.............................................................................. 25

4. UTILISATION QUOTIDIENNE................................................................................27

5. CONSEILS................................................................................................................31

6. ENTRETIEN ET NETTOYAGE................................................................................ 33

7. EN CAS D'ANOMALIE DE FONCTIONNEMENT................................................33

8. INSTALLATION....................................................................................................... 36

9. CARACTÉRISTIQUES TECHNIQUES.....................................................................39

POUR DES RÉSULTATS PARFAITS

Merci d'avoir choisi ce produit AEG. Nous l'avons conçu pour qu'il vous offre des

performances irréprochables pour longtemps, en intégrant des technologies

innovantes qui vous simplifient la vie grâce à des caractéristiques que vous ne

trouverez pas forcément sur des appareils ordinaires. Veuillez prendre quelques

instants pour lire cette notice afin d'utiliser au mieux votre appareil.

Visitez notre site Internet pour :

Obtenir des conseils d'utilisation, des brochures, de l'aide, des informations :

www.aeg.com

Enregistrez votre produit pour obtenir un meilleur service :

www.registeraeg.com

Acheter des accessoires, consommables et pièces de rechange d'origine pour

votre appareil :

www.aeg.com/shop

SERVICE APRÈS-VENTE

Utilisez toujours des pièces d'origine.

Avant de contacter le service, assurez-vous de disposer des informations

suivantes : Modèle, PNC, numéro de série.

Vous trouverez ces informations sur la plaque signalétique.

Avertissement/Consignes de sécurité

Informations générales et conseils

Informations en matière de protection de l'environnement

Sous réserve de modifications.

www.aeg.com

20

La page charge ...

AEG HK854326IB Manuel utilisateur

AEG HK854326IB Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents