Amana AWO6317SFS Manuel utilisateur

Marque: Amana

Modèle: AWO6317SFS

Catégorie: Cuisinières

Taper: Manuel utilisateur

THANK YOU for purchasing this high-quality product. Register your new oven at www.amana.com. In Canada, register your oven

at www.amanacanada.ca.

For future reference, please make a note of your product model and serial numbers. These can be located under the control panel.

Model Number _________________________________________ Serial Number __________________________________________

Para una versión de estas instrucciones en español, visite www.amana.com.

Deberá tener los números de modelo y serie. Se encuentran ubicada debajo del panel de control.

Table of Contents

BUILT-IN ELECTRIC OVEN

USERINSTRUCTIONS

W10785116B

OVEN SAFETY ................................................................................2

FEATURE GUIDE ............................................................................3

OVEN USE ....................................................................................... 5

Electronic Oven Controls .............................................................5

Sabbath Mode..............................................................................6

Aluminum Foil ............................................................................... 6

Positioning Racks and Bakeware ................................................6

Oven Vent .....................................................................................7

Baking and Roasting ....................................................................7

Broiling..........................................................................................7

Keep Warm ................................................................................... 8

Favorite ......................................................................................... 8

Cook & Hold .................................................................................9

Cook Time ....................................................................................9

OVEN CARE ..................................................................................10

Self-Cleaning Cycle ....................................................................10

General Cleaning ........................................................................11

Oven Lights ................................................................................11

PROBLEM SOLVER ......................................................................12

ACCESSORIES .............................................................................13

WARRANTY ..................................................................................14

OVEN SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can

happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety

messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electrical shock,

injury to persons, or damage when using the oven, follow

basic precautions, including the following:

■

Proper Installation – Be sure the oven is properly installed

and grounded by a qualified technician.

■

Never Use the Oven for Warming or Heating the Room.

■

Do Not Leave Children Alone – Children should not be left

alone or unattended in area where oven is in use. They

should never be allowed to sit or stand on any part of the

oven.

■ Wear Proper Apparel – Loose-fitting or hanging garments

should never be worn while using the oven.

■ User Servicing – Do not repair or replace any part of the

oven unless specifically recommended in the manual. All

other servicing should be referred to a qualified technician.

■ Storage in Oven – Flammable materials should not be

stored in an oven.

■ Do Not Use Water on Grease Fires – Smother fire or flame

or use dry chemical or foam-type extinguisher.

■ Use Only Dry Potholders – Moist or damp potholders on

hot surfaces may result in burns from steam. Do not let

potholder touch hot heating elements. Do not use a towel

or other bulky cloth.

■ Use Care When Opening Door – Let hot air or steam

escape before removing or replacing food.

■

Do Not Heat Unopened Food Containers – Build-up of

pressure may cause container to burst and result in injury.

■ Keep Oven Vent Ducts Unobstructed.

■

Placement of Oven Racks – Always place oven racks in

desired location while oven is cool. If rack must be moved

while oven is hot, do not let potholder contact hot heating

element in oven.

■

DO NOT TOUCH HEATING ELEMENTS OR INTERIOR

SURFACES OF OVEN – Heating elements may be hot

even though they are dark in color. Interior surfaces of an

oven become hot enough to cause burns. During and after

use, do not touch, or let clothing or other flammable

materials contact heating elements or interior surfaces of

oven until they have had sufficient time to cool. Other

surfaces of the oven may become hot enough to cause

burns – among these surfaces are oven vent openings and

surfaces near these openings, oven doors, and

windows of

oven doors.

For self-cleaning ovens:

■ Do Not Clean Gasket – The gasket is essential for a good

seal. Care should be taken not to rub, damage, or move

the gasket.

■ Do Not Use Oven Cleaners – No commercial oven cleaner

or oven liner protective coating of any kind should be used

in or around any part of the oven.

■

Clean Only Parts Listed in Manual.

■

Before Self-Cleaning the Oven – Remove broiler pan and

other utensils.

State of California Proposition 65 Warnings:

WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other

reproductive harm.

FEATURE GUIDE

This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked

Questions (FAQs) section of our website at www.amana.com for more detailed instructions. In Canada, reference the Customer Service

section at www.amanacanada.ca. For more speciﬁc details on a feature and steps to use the features listed, refer to the titled section for

that feature.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

Keypad Feature Instructions

CLOCK Clock

This clock can use a 12- or 24-hour cycle. See “Electronic Oven Controls” section.

1. Press CLOCK until “Clock” is displayed.

2. Press the number keypads to set the time of day.

3. Press START.

LIGHT Oven cavity light

While the oven door(s) are closed, press LIGHT to turn the light(s) on and off.

The oven light(s) will come on when an oven door is opened.

TIMER ON•OFF Oven timer

The Timer can be set in hours or minutes up to 9 hours and 59 minutes.

1. Press TIMER ON•OFF.

2. Press the number keypads to set the length of time in hr-min. Leading zeros

do not have to be entered. For example, for 2 minutes, enter “2.”

3. Press TIMER ON•OFF to begin the countdown. If enabled, timer tone(s) will

sound at the end of countdown.

4. Press TIMER ON•OFF to cancel the Timer and return to the time of day.

Do not press OFF/CANCEL because the oven will turn off.

START Cooking start

The Start keypad begins any oven function. If Start is not pressed within 2 minutes

after pressing a keypad, the function is canceled and the time of day is displayed.

OFF/CANCEL Oven function

The Off/Cancel keypad stops any oven function except the Clock, Timer, and Control Lock.

BAKE Baking and

roasting

1. Press BAKE.

2. Press the number keypads to set the desired temperature. If the temperature

entered is not in the range of the temperatures allowed, the minimum or maximum

allowed temperature will be displayed. Enter a temperature in the allowable range.

3. (Single rack baking only) Press START. Rapid Preheat will begin.

IMPORTANT: Rapid Preheat should be used only for single-rack baking.

4. (Multiple rack baking) Press START. Press START again to cancel Rapid Preheat.

5. To change the temperature, repeat steps 2 and 3.

6. Press OFF/CANCEL when ﬁnished.

Keypad Feature Instructions

BROIL Broiling

1. Press BROIL.

2. Press the number keypads to set the desired temperature. If the temperature

entered is not in the range of the temperatures allowed, the minimum or maximum

allowed temperature will be displayed. Enter a temperature in the allowable range.

3. Press START, and then allow the oven to preheat for 5 minutes.

4. Position the cookware in the oven, and close the door.

5. To change the temperature, repeat steps 2 and 3.

6. Press OFF/CANCEL when ﬁnished.

FAVORITE Saved favorite

The Favorite feature allows you to save the time and temperature settings from

any active cook function. To save or use favorite, see the “Favorite” section.

KEEP WARM Hold warm

Food must be at serving temperature before placing it in the warmed oven.

1. Press KEEP WARM.

2. Press the number keypads to set the desired temperature. If the temperature

entered is not in the range of the temperatures allowed, the minimum or maximum

allowed temperature will be displayed. Enter a temperature in the allowable range.

3. Press START.

4. To change the temperature, repeat steps 2 and 3.

5. Press OFF/CANCEL when ﬁnished.

DELAY START Delayed start

The Delay Start keypad is used to enter the starting time for an oven function with

a delayed start. Delay Start should not be used for foods such as breads and cakes

because they may not bake properly.

To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

COOK TIME Timed cooking

Cook Time allows the oven to be set to turn on at a certain time of day,

cook for a set length of time, and/or shut off automatically.

To set a Timed Cook or a Delayed Timed Cook, see the “Cook Time” section.

COOK & HOLD Timed cooking

and keep warm

Cook & Hold allows the oven to be set to cook for a set length of time,

followed by a 1-hour Keep Warm cycle.

To set a Cook & Hold or a Delayed Cook & Hold, see the “Cook & Hold” section.

SELF CLEAN Self-cleaning

cycle

See the “Self-Cleaning Cycle” section.

CONTROL LOCK

hold 3 sec.

Oven control

lockout

1. Check that the oven and timer are OFF.

2. Press and hold CONTROL LOCK for 3 seconds.

3. If enabled, a tone will sound and the controls will be locked.

4. Repeat to unlock. No keypads will function with the controls locked.

SETTINGS Oven use

functions

Settings enables you to personalize the audible tones and oven operation to suit

your needs. See the “Oven Use” section.

OVEN USE

Odors and smoke are normal when the oven is used the ﬁrst

few times or when it is heavily soiled.

IMPORTANT: The health of some birds is extremely sensitive to

the fumes given off. Exposure to the fumes may result in death

to certain birds. Always move birds to another closed and well-

ventilated room.

Electronic Oven Controls

Control Display

The display will light up when ﬁrst powered up or after a power

loss. When oven is not in use, the time of day is displayed.

Tones

Tones are audible signals, indicating the following:

One Tone

■ Valid keypad press

■ Oven is preheated (long tone).

■ Kitchen timer (long tone with reminder tone every 60 seconds)

■ Function has been entered.

Three Tones

■ Invalid keypad press

Four Tones

■ End of cycle (with reminder tone every 60 seconds)

Use the Settings keypad to change the tone settings.

Settings

Many features of the oven control can be adjusted to meet

your personal needs. These changes are made using the

Settings keypad.

Use the Settings keypad to scroll through the features that

can be changed. Each press of the Settings keypad will

advance the display to the next setting. After selecting

the feature to be changed, the control will prompt you for

the required input. Details of all of the feature changes are

explained in the following sections.

Press OFF/CANCEL to exit Settings.

Fahrenheit and Celsius

The temperature is preset to Fahrenheit but can be changed

to Celsius.

1. Press SETTINGS until “TEMP UNIT” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press OFF/CANCEL to exit and display the time of day.

Audible Tones Disable

Turns off most tones, including the end of cycle tone

and key press tones. Reminder tones remain enabled

when audible tones are disabled.

1. Press SETTINGS until “SOUND” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press OFF/CANCEL to exit and display the time of day.

Sound Volume

Sets the pitch of the tone to either high or low.

1. Press SETTINGS until “SOUND VOLUME” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press OFF/CANCEL to exit and display the time of day.

End of Cycle Tone

Activates or turns off the tones that sound at the end of a cycle.

1. Press SETTINGS until “END TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press OFF/CANCEL to exit and display the time of day.

Key Press Tones

Activates or turns off the tones when a keypad is pressed.

1. Press SETTINGS until “KEYPRESS TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press OFF/CANCEL to exit and display the time of day.

Reminder Tones Disable

Turns off the short repeating tone that sounds every 1 minute

after the end of cycle tones.

1. Press SETTINGS until “REMINDER TONE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press OFF/CANCEL to exit and display the time of day.

12/24 Hour Clock

1. Press SETTINGS until “12/24 HOUR” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press OFF/CANCEL to exit and display the time of day.

12-Hour Shutoff

The oven control is set to automatically shut off the oven

12 hours after the oven initiates a cook or clean function.

This will not interfere with any timed or delay cook functions.

1. Press SETTINGS until “12 HR AUTO OFF” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press OFF/CANCEL to exit and display the time of day.

Languages - Scrolling Display Text

Language options are English and French.

1. Press SETTINGS until “LANGUAGE” is displayed.

2. The current setting will be displayed.

3. Press the number keypad as instructed by the scrolling

text to select the new language.

4. Press OFF/CANCEL to exit and display the time of day.

Oven Temperature Offset Control

IMPORTANT: Do not use a thermometer to measure oven

temperature. Elements will cycle on and off as needed to provide

consistent temperature, but they may run slightly hot or cool at

any point in time due to this cycling. Most thermometers are slow

to react to temperature change and will not provide an accurate

reading due to this cycling.

The oven provides accurate temperatures; however, it may cook

faster or slower than your previous oven, so the temperature can

be adjusted to personalize it for your cooking needs. It can be

changed to Fahrenheit or Celsius.

To Adjust Oven Temperature:

1. Press SETTINGS until “TEMP CALIB” is displayed.

2. The current setting will be displayed.

3. Press START to select the choice displayed in Step 2.

Wait several seconds for the display to change or press

START, and then continue with Step 4.

4. Press the “3” keypad to increase the temperature in 5°F

(3°C) increments, or press the “6” keypad to decrease

the temperature in 5°F (3°C) increments. The range is

from -30°F to +30°F (-18°C to +18°C).

5. Press START.

6. Press OFF/CANCEL to exit and display the time of day.

Demo Mode

IMPORTANT: This feature is intended for use on the sales ﬂoor

with 120V power connection and permits the control features

to be demonstrated without heating elements turning on. If this

feature is activated, the oven will not work.

1. Press SETTINGS until “DEMO MODE” is displayed.

2. The current setting will be displayed.

3. Press the “1” keypad to adjust the setting.

4. Press OFF/CANCEL to exit and display the time of day.

Sabbath Mode

The Sabbath Mode sets the oven to remain on in a bake setting

until turned off.

When the Sabbath Mode is set, only the Bake cycle will operate.

All other cooking and cleaning cycles are disabled. No tones will

sound, and the displays will not indicate temperature changes.

When the oven door is opened or closed, the oven light will

not turn on or off and the heating elements will not turn on

or off immediately.

NOTE: If a power failure happens while Sabbath Mode is running,

the oven will show Sabbath Mode is on, but the Bake cycle will not

be on. If the oven door is opened during this time, the oven light

will turn on.

To Enable Sabbath Mode Capability (One Time Only):

1. Press SETTINGS until “SABBATH” is displayed.

2. Press the “1” keypad. Sabbath Mode can be activated

for baking.

3. Press OFF/CANCEL to save the setting and exit to display

the time of day.

NOTE: To disable the Sabbath Mode, repeat steps 1 through 3

to change the status from “SABBATH ON” to “SABBATH OFF.”

To Activate Sabbath Mode:

1. Press BAKE.

2. Press the number keypads to set the desired temperature.

If the temperature entered is not in the range of the

temperatures allowed, the minimum or maximum allowed

temperature will be displayed. Enter a temperature in the

allowable range.

3. Press START.

For timed cooking in Sabbath Mode, press COOK TIME, and

then press the number keypads to set the desired cook time.

Press START.

4. Press SETTINGS. Three tones will sound. Then press “7.”

“SAb” will appear in the display.

To Adjust Temperature:

1. Press the number keypad as instructed by the scrolling

text to select the new temperature.

NOTE: The temperature adjustment will not appear on

the display, and no tones will sound. The scrolling text

will be shown on the display as it was before the keypad

was pressed.

2. Press START.

To Deactivate Sabbath Mode:

Press SETTINGS, and then press “7” to return to regular baking,

or press OFF/CANCEL to turn off the oven(s).

Aluminum Foil

IMPORTANT: To avoid permanent damage to the oven bottom

ﬁnish, do not line the oven bottom with any type of foil or liner.

For best cooking results, do not cover entire oven rack with foil

because air must be able to move freely.

Positioning Racks and Bakeware

IMPORTANT: To avoid permanent damage to the porcelain

ﬁnish, do not place food or bakeware directly on the oven

door or bottom.

Racks

■ Position racks before turning on the oven.

■ Do not position racks with bakeware on them.

■ Make sure racks are level.

■ Place food so it will not rise into the broil element. Allow

at least

" (1.3 cm) between pans and the broil element.

To move a rack, pull it out to the stop position, raise the front

edge, and then lift it out. Use the following illustrations and

charts as a guide for positioning racks.

Rack Positions

Broiling

Food Rack Position

Broiled meats, poultry, ﬁsh 6

Broiling/searing meats, hamburgers, steaks 6

Baking

Food Rack Position

Large roasts, roasted meats or poultry 1 or 2

Most baked goods, casseroles 2 or 3

Baking Layer Cakes on 1 Rack

Place the cakes on the rack as shown.

Multiple Rack Cooking

2-rack: Use rack positions 2 and 5 for regular baking.

Baking Layer Cakes on 2 Racks

For best results when baking cakes on 2 racks, use rack

positions 2 and 5 with the Bake function. Place the cakes

on the racks as shown.

Baking Cookies on 2 Racks

For best results when baking cookies on 2 racks, use rack

positions 2 and 5 with the Bake function.

Bakeware

To cook food evenly, hot air must be able to circulate.

Allow 2" (5.0 cm) of space around bakeware and oven walls.

Use the following chart as a guide.

Number of Pan(s) Position on Rack

1 Center of rack

2 Side by side

3 or 4 Refer to the previous illustration

NOTE: Bakeware materials and color may affect results. Dark,

dull, non-stick or glass pans may require shorter baking times;

in contrast insulated or stainless steel pans may require longer

baking times. Follow bakeware manufacturer’s recommendations.

Oven Vent

The oven vent should not be blocked or covered since they allow

the inlet of fresh air into the cooling system. Also, the bottom

vent should not be blocked or covered since it allows the inlet

of fresh air into the cooling system and the outlet of hot air from

the cooling system. Blocking or covering vents will cause poor

air circulation, affecting cooking, cleaning, and cooling results.

Baking and Roasting

Preheating

When beginning a Bake cycle, the oven will begin preheating after

Start is pressed. The oven will take approximately 13 to 19 minutes

to reach 350°F (177°C) with all of the oven racks provided with

your oven inside the oven cavity. Higher temperatures will take

longer to preheat. The preheat cycle rapidly increases the oven

temperature. The actual oven temperature will go above your set

temperature to offset the heat lost when your oven door is opened

to insert food. This ensures that when you place your food in the

oven, the oven will begin at the proper temperature. Insert your

food when the preheat tone sounds. Do not open the door during

preheat before the tone sounds.

Rapid Preheat

Rapid Preheat can be used to shorten the preheating time. Only

one standard ﬂat oven rack should be in the oven during Rapid

Preheat. Extra racks should be removed prior to starting Rapid

Preheat. The preheating cycle should be completed before placing

food in the oven. When the Rapid Preheat cycle is complete, the

oven starts a normal Bake cycle.

IMPORTANT: Rapid Preheat should be used only for

single-rack baking.

Oven Temperature

While in use, the oven elements will cycle on and off as needed

to maintain a consistent temperature, but they may run slightly

hot or cool at any point in time due to this cycling. Opening the

oven door while in use will release the hot air and cool the oven

which could impact the cooking time and performance. It is

recommended to use the oven light to monitor cooking progress.

NOTE: On models with convection, the convection fan may run

in the non-convection bake mode to improve oven performance.

Broiling

When broiling, preheat the oven for 5 minutes before putting food

in, unless recommended otherwise in the recipe. Position food

on grid in a broiler pan, and then place it in the center of the oven

rack. Close the oven door to ensure proper broiling temperature.

NOTE: Odors and smoke are normal the ﬁrst few times the oven

is used or if the oven is heavily soiled.

Changing the temperature when broiling allows more precise

control when cooking. The lower the broil setting is, the slower the

cooking will be. Thicker cuts and unevenly shaped pieces of meat,

ﬁsh, and poultry may cook better at lower broil settings. Place the

food in the upper or lower oven. Refer to the “Positioning Racks

and Bakeware” section for more information.

On lower settings, the broil element will cycle on and off

to maintain the proper temperature.

■ For best results, use a broiler pan and grid. It is designed

to drain juices and help avoid spatter and smoke.

If you would like to purchase a broiler pan, one may

be ordered. Please refer to the “Accessories” section

for more information.

A. Control panel

B. Oven vent

C. Oven

Keep Warm

IMPORTANT: Food must be at serving temperature before placing

it in the warmed oven. Food may be held up to 1 hour; however,

breads and casseroles may become too dry if left in the oven

during the Keep Warm function. For best results, cover food.

The Keep Warm feature allows hot cooked foods to stay

at serving temperature.

To Use:

1. Press KEEP WARM.

2. Press the number keypads to set the desired temperature.

If the temperature entered is not in the range of the

temperatures allowed, the minimum or maximum allowed

temperature will be displayed. Enter a temperature in the

allowable range.

NOTE: The temperature may be changed at any time

by pressing the number keypads to enter the desired

temperature and then START.

3. Press START.

4. Place food in the oven.

5. Press OFF/CANCEL when ﬁnished.

6. Remove food from the oven.

To Cancel Keep Warm:

1. Press OFF/CANCEL.

2. Remove food from oven.

Favorite

The Favorite feature allows you to save the time and temperature

settings from any active cook function.

To Save a Cooking Function as a Favorite:

1. Press FAVORITE.

2. Press “2” to save the last performed cooking function.

A conﬁrmation message will appear.

To Recall and Start a Favorite:

1. Press FAVORITE.

2. Press “1.” The last saved function will appear onscreen.

If no functions have ever been saved, “no favorite saved”

will appear.

3. The set temperature can be changed by using the number

keypad to enter the desired value, then pressing START.

The Cook Time (if available) can be changed by pressing

COOK TIME, and then using the number keypad to enter

desired time, then pressing START. The temperature and

time can be changed after the function has started.

4. Place food in the oven when required.

5. Press OFF/CANCEL when ﬁnished.

6. Remove food from the oven.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

Cook & Hold

Cook & Hold allows the oven to be set to cook for a set length

of time, followed by a 1-hour Keep Warm cycle.

Delay Cook & Hold allows the oven to be set to start cooking

after a length of time you set, cook for a set length of time,

followed by a 1-hour Keep Warm cycle.

Delay start should not be used for food such as breads and cakes

because they may not bake properly. Do not use delayed baking

if oven is already hot.

NOTE: During the Cook & Hold function, the Delay Start

and Cook Time are applied to the baking itself and not

for the “Holding Warm” phase.

1. Press BAKE.

2. Use the number keypads to enter the desired temperature.

NOTE: The temperature may be changed at any time by

using the number keypads to enter the desired temperature,

and then pressing START. Changing the temperature once

food is placed in the oven could affect the performance.

3. Press COOK & HOLD.

4. Use the number keypads to enter the desired cook time.

5. (Optional) If a Delay Start is desired, press DELAY START.

Use the number keypad to enter the desired time for delay.

Repeat steps 1 through 3.

6. Press START. The oven will preheat, and a beep will sound

when the preheat is done.

7. Place the food in the oven, and close the oven door

when preheat is complete.

8. At the end of the time set, the oven will keep warm

automatically, and the end of cycle tone will sound.

NOTE: To change the set cooking time at any time during

the cooking cycle:

a. Press COOK TIME.

b. Enter the desired time using the number keypads.

c. Press START.

d. Press COOK & HOLD.

Once the cook time countdown is complete, “Cooking

complete - Holding warm” will scroll in the text area until the

door is opened, Off/Cancel is pressed, or 1 hour has passed.

9. Press OFF/CANCEL to complete the cycle.

10. Remove food from the oven.

NOTE: To cancel the hold function without canceling the cooking

cycle, press COOK & HOLD after the Cook & Hold function is

enabled. The display will not show any change. Once the cook

time countdown is complete, “Cooking complete” will scroll in

the text area.

Cook Time

To Set a Timed Cook:

1. Press the keypad for any cooking function except Broil

or Keep Warm.

2. Press the number keypads to set the desired temperature.

If the temperature entered is not in the range of the

temperatures allowed, the minimum or maximum allowed

temperature will be displayed. Enter a temperature in the

allowable range.

3. Press COOK TIME.

4. Press the number keypads to enter the length of time to cook.

5. Press START. The display will count down the time.

When the time ends, the oven will shut off automatically.

The temperature and/or time setting can be changed

at any time.

To change the temperature, repeat steps 2 through 5

and press START.

To change the time setting, repeat steps 3 through 5.

6. Press OFF/CANCEL to clear the display.

To Set a Delayed Timed Cook:

1. Press DELAY START.

2. Press the number keypads to enter the number of hours

and/or minutes you want to delay the start time.

3. Press the keypad for any cooking function except Broil

or Keep Warm.

4. Press the number keypads to set the desired temperature.

If the temperature entered is not in the range of the

temperatures allowed, the minimum or maximum allowed

temperature will be displayed. Enter a temperature in the

allowable range.

5. Press START.

6. Press the number keypads to enter the length of time to cook.

7. Press START.

When the start time is reached, the oven will automatically

turn on.

To change the temperature after the delay countdown, repeat

steps 4 and 5. To change the time after the delay countdown,

press COOK TIME and then repeat steps 6 and 7.

When the set cook time ends, the oven will shut off

automatically.

8. Press OFF/CANCEL to clear the display.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

WARNING

Food Poisoning Hazard

Do not let food sit in oven more than one hour before

or after cooking.

Doing so can result in food poisoning or sickness.

OVEN CARE

Self-Cleaning Cycle

IMPORTANT: The health of some birds is extremely sensitive

to the fumes given off during the Self-Cleaning cycle. Exposure

to the fumes may result in death to certain birds. Always move

birds to another closed and well-ventilated room.

Keep the kitchen well-ventilated during the Self-Cleaning cycle

to help get rid of heat, odors, and smoke.

Do not block the oven vent(s) during the Self-Cleaning cycle.

Air must be able to move freely. Depending on your model,

see “Oven Vent” or “Oven Vents” section.

Do not clean, rub, damage, or move the oven door gasket.

Prepare Oven:

■ Remove the broiler pan, grid, cookware and bakeware,

all cooking utensils, oven racks, aluminum foil and, on

some models, the temperature probe from the oven.

■ Use a damp cloth to clean inside door edge and the 1

(38 mm) area around the inside oven cavity frame, being

certain not to move or bend the gasket.

■ Wipe out any loose soil to reduce smoke and avoid damage.

At high temperatures, foods react with porcelain. Staining,

etching, pitting, or faint white spots can result. This will not

affect cooking performance.

IMPORTANT:

■ Oven temperature must be below 500°F (260°C) to

program a clean cycle.

How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel

in the oven may result in discoloring, loss of gloss, hairline

cracks, and popping sounds.

The Self-Cleaning cycle uses very high temperatures, burning

soil to a powdery ash.

Once the oven has completely cooled, remove ash with a damp

cloth. To avoid breaking the glass, do not apply a cool damp cloth

to the inner door glass before it has completely cooled.

The oven light will not light during the Self-Cleaning cycle.

To stop the Self-Cleaning cycle at anytime, press OFF/CANCEL.

If the temperature is too high, the oven door will remain locked.

When the oven is locked, the door of the oven cannot be opened.

To avoid damage to the door, do not force the door open when

the oven is locked.

Before self-cleaning, make sure the door is completely closed or

the door will not lock and the Self-Cleaning cycle will not begin.

NOTE: 12 hours must pass before the next Self-Cleaning

can begin.

The oven is preset for the recommended cleaning cycle; however,

the time can be changed. Suggested cleaning times are 3 hours

for light soil and between 4 hours and 5 hours for average

to heavy soil.

Use the following chart as a guide to determine the desired

cleaning level.

Cleaning Level

Total Cleaning Time

(Includes a 20 Minute Cool Down Time)

1 3 hours 20 minutes

2 3 hours 40 minutes

3 4 hours

4 4 hours 20 minutes

5 4 hours 50 minutes

6 5 hours 20 minutes

To Self-Clean:

1. Close the oven door, and then press SELF CLEAN.

2. Choose the cleaning level desired by pressing the appropriate

number keypad as instructed by the scrolling text.

3. Press START.

The oven door will automatically lock.

When the Self-Cleaning cycle is complete and the oven cools,

the oven door will unlock.

4. When the oven is completely cooled, remove ash

with a damp cloth.

To Delay Start Self-Clean:

1. Close the oven door, and then press DELAY START.

2. Press the number keypads to enter the desired amount

of time by which you want to delay the start.

3. Press SELF CLEAN.

4. Choose the cleaning level desired by pressing the appropriate

number keypad as instructed by the scrolling text.

5. Press START.

The oven door will automatically lock after the

Delay Start countdown.

When the Self-Cleaning cycle is complete and the oven cools,

the oven door will unlock.

6. When the oven is completely cooled, remove ash

with a damp cloth.

WARNING

Burn Hazard

Do not touch the oven during the Self-Cleaning cycle.

Keep children away from oven during

Self-Cleaning cycle.

Failure to follow these instructions can result in burns.

General Cleaning

IMPORTANT: Before cleaning, make sure all controls are

OFF and the oven is cool. Always follow label instructions

on cleaning products. For additional information, you can

visit the Frequently Asked Questions (FAQs) section of

our website at www.amana.com. In Canada, refer to the

Customer Service section at www.amanacanada.ca.

Soap, water, and a soft cloth or sponge are suggested ﬁrst

unless otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES

(on some models)

Food spills containing acids, such as vinegar and tomato, should

be cleaned as soon as the entire oven is cool. These spills may

affect the ﬁnish.

Cleaning Method:

■ Glass cleaner, mild liquid cleaner, or nonabrasive

scrubbing pad:

Gently clean around the model/serial/rating plate

because scrubbing may remove numbers.

■ affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use

soap-ﬁlled scouring pads, abrasive cleaners, steel-wool pads,

gritty washcloths, or abrasive paper towels. Damage may occur

to stainless steel surfaces, even with one-time or limited use.

Cleaning Method:

Rub in direction of grain to avoid damaging.

■ affresh

Stainless Steel Cleaner Part Number W10355016:

See the “Accessories” section for more information.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers,

ammonia, or sodium hydroxide (lye) because paint surface

may stain.

CONTROL PANEL AND OVEN DOOR EXTERIOR

To avoid damage to the control panel, do not use abrasive

cleaners, steel-wool pads, gritty washcloths, or abrasive

paper towels.

Cleaning Method:

■ Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly

on panel.

■ affresh

Kitchen and Appliance Cleaner Part Number

W10355010 (not included):

See the “Accessories” section for more information.

OVEN RACKS

Cleaning Method:

■ Steel-wool pad

■ For racks that have discolored and are harder to slide, a light

coating of vegetable oil applied to the rack guides will help

them slide.

OVEN CAVITY

Do not use oven cleaners.

Food spills should be cleaned after the oven cools. At high

temperatures, foods react with porcelain and staining, etching,

pitting, or faint white spots can result.

Cleaning Method:

■ Self-Cleaning cycle:

See “Self-Cleaning Cycle” ﬁrst.

Oven Lights

The oven light(s) are standard 40-watt appliance bulbs.

Before replacing, make sure the oven is cool and the controls

are turned off.

To Replace:

1. Disconnect power.

2. Turn the glass bulb cover in the back of the oven

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.

4. Replace bulb, and then bulb cover by turning clockwise.

5. Reconnect power.

PROBLEM SOLVER

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service

call, refer to the warranty page in this manual and scan the code there with your mobile device, or visit http://amana.custhelp.com.

In Canada, visit http://www.amanacanada.ca.

In the U.S.A.:

Whirlpool Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

In Canada:

Whirlpool Brand Home Appliances

Customer eXperience Centre

200 - 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence

Problem Possible Causes and/or Solutions

Nothing will operate

Oven isn’t wired properly - See the Installation Instructions.

Household fuse is blown, or a circuit breaker is tripped - Replace the fuse, or reset the circuit breaker.

If the problem continues, call an electrician.

The control displays an F9 or F9 E0 error code - The electrical outlet in the home may be miswired.

Contact a qualiﬁed electrician to verify the electrical supply.

Oven will not operate

Delay Start is set - See the “Cook Time” section.

Control Lock is on - Press and hold CONTROL LOCK for 3 seconds to unlock.

Control is in Demo Mode - See the “Electronic Oven Controls” section. Demo Mode is used for display

models in a showroom.

Electronic oven control set incorrectly - See the “Electronic Oven Controls” section.

Oven temperature too

high or too low

Oven temperature needs adjustment - See “Oven Temperature Control” in the “Electronic

Oven Controls” section.

Display shows

messages

Power failure (display shows ﬂashing time) - On some models, reset the clock, if needed.

See the “Clock” keypad feature in the “Feature Guide” section.

Error code (display shows letter followed by number) - Press OFF/CANCEL to clear the display.

See “Control Display” in the “Electronic Oven Controls” section. If it reappears, call for service.

See the “Warranty” section for contact information.

Cleaning cycle did not

work on all spills

Several cooking cycles between cleaning cycles or spills on oven walls and doors - Run additional

cleaning cycles. The affresh

Kitchen and Appliance Cleaner can be used for stubborn soils. See the

“Accessories” and “Self-Cleaning Cycle” sections for more information.

Oven cooking results

not what expected

The set temperature was incorrect - Double-check the recipe in a reliable cookbook.

Oven temperature needs adjustment - See “Oven Temperature Control” in the “Electronic

Oven Controls” section.

Oven was not preheated - See the “Baking and Roasting” section.

Racks were positioned improperly - See the “Positioning Racks and Bakeware” section.

Not enough air circulation around bakeware - See the “Positioning Racks and Bakeware” section.

Batter distributed unevenly in pan - Check that batter is level in the pan.

Darker browning of food caused by dull or dark bakeware - Lower the oven temperature 25°F (15°C)

or move rack to a higher position in the oven.

Lighter browning of food caused by shiny or light colored bakeware - Move rack to a lower position

in the oven.

Incorrect length of cooking time was used - Adjust cooking time.

Oven door was not closed - Be sure that the bakeware does not keep the door from closing.

Oven door was opened during cooking - Oven peeking releases oven heat and can result in longer

cooking times.

Rack is too close to bake burner, making baked items too brown on bottom - Move rack to higher

position in the oven.

Pie crusts browning too quickly - Use aluminum foil to cover the edge of the crust and/or reduce

baking temperature.

ACCESSORIES

For accessories in the U.S.A., you can visit our website at www.amana.com or call us at 1-800-843-0304.

In Canada, visit our website at www.amanacanada.ca or call us at 1-800-807-6777.

Granite Cleaner and Polish

Order Part Number W10275756

Porcelain Broiler Pan and Grid

Order Part Number 4396923

Premium Broiler Pan and Roasting Rack

Order Part Number W10123240

affresh

Stainless Steel Cleaning Wipes

(stainless steel models)

Order Part Number W10355049

affresh

Stainless Steel Cleaner

(stainless steel models)

Order Part Number W10355016

affresh

Kitchen and Appliance Cleaner

Order Part Number W10355010

11/14

IF YOU NEED SERVICE:

1. Before contacting us to arrange service, please determine whether your product requires repair. Some

questions can be addressed without service. Please take a few minutes to review the Troubleshooting or

Problem Solver section of the Use and Care Guide, scan the QR code on the right to access additional

resources, or visit http://amana.custhelp.com.

2. All warranty service is provided exclusively by our authorized Amana Service Providers. In the U.S. and

Canada, direct all requests for warranty service to:

Amana Customer eXperience Center

In the U.S.A., call 1-800-843-0304. In Canada, call 1-800-807-6777.

If outside the 50 United States or Canada, contact your authorized Amana dealer to determine whether another warranty applies.

AMANA

MAJOR APPLIANCE

LIMITED WARRANTY

ATTACH YOUR RECEIPT HERE. PROOF OF PURCHASE IS

REQUIRED TO OBTAIN WARRANTY SERVICE.

Please have the following information available when you call the

Customer eXperience Center:

■ Name, address and telephone number

■ Model number and serial number

■ A clear, detailed description of the problem

■ Proof of purchase including dealer or retailer name and address

ONE YEAR LIMITED WARRANTY

WHAT IS COVERED WHAT IS NOT COVERED

For one year from the date of purchase,

when this major appliance is installed,

operated and maintained according to

instructions attached to or furnished with

the product, Amana brand of Whirlpool

Corporation or Whirlpool Canada LP

(hereafter “Amana”) will pay for Factory

Speciﬁed Replacement Parts and repair

labor to correct defects in materials or

workmanship that existed when this

major appliance was purchased, or at

its sole discretion replace the product.

In the event of product replacement,

your appliance will be warranted for

the remaining term of the original unit’s

warranty period.

YOUR SOLE AND EXCLUSIVE REMEDY

UNDER THIS LIMITED WARRANTY

SHALL BE PRODUCT REPAIR AS

PROVIDED HEREIN. Service must be

provided by a Amana designated service

company. This limited warranty is valid

only in the United States or Canada and

applies only when the major appliance

is used in the country in which it was

purchased. This limited warranty is

effective from the date of original

consumer purchase. Proof of original

purchase date is required to obtain

service under this limited warranty.

1. Commercial, non-residential, multiple-family use, or use inconsistent with published user,

operator or installation instructions.

2. In-home instruction on how to use your product.

3. Service to correct improper product maintenance or installation, installation not in

accordance with electrical or plumbing codes or correction of household electrical or

plumbing (i.e. house wiring, fuses or water inlet hoses).

4. Consumable parts (i.e. light bulbs, batteries, air or water ﬁlters, preservation solutions, etc.).

5. Defects or damage caused by the use of non-genuine Amana parts or accessories.

6. Conversion of products from natural gas or L.P. gas.

7. Damage from accident, misuse, abuse, ﬁre, ﬂoods, acts of God or use with products not

approved by Amana.

8. Repairs to parts or systems to correct product damage or defects caused by unauthorized

service, alteration or modiﬁcation of the appliance.

9. Cosmetic damage including scratches, dents, chips, and other damage to the appliance

ﬁnishes unless such damage results from defects in materials and workmanship and is

reported to Amana within 30 days.

10. Discoloration, rust or oxidation of surfaces resulting from caustic or corrosive environments

including but not limited to high salt concentrations, high moisture or humidity or exposure

to chemicals.

11. Food or medicine loss due to product failure.

12. Pick-up or delivery. This product is intended for in-home repair.

13. Travel or transportation expenses for service in remote locations where an authorized

Amana servicer is not available.

14. Removal or reinstallation of inaccessible appliances or built-in ﬁxtures (i.e. trim, decorative

panels, ﬂooring, cabinetry, islands, countertops, drywall, etc.) that interfere with servicing,

removal or replacement of the product.

15. Service or parts for appliances with original model/serial numbers removed, altered or not

easily determined.

The cost of repair or replacement under these excluded circumstances shall be borne by

the customer.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not

allow limitations on the duration of implied warranties of merchantability or ﬁtness, so this limitation may not apply to you. This warranty gives

you speciﬁc legal rights, and you also may have other rights that vary from state to state or province to province.

DISCLAIMER OF REPRESENTATIONS OUTSIDE OF WARRANTY

Amana makes no representations about the quality, durability, or need for service or repair of this major appliance other than the

representations contained in this warranty. If you want a longer or more comprehensive warranty than the limited warranty that comes with

this major appliance, you should ask Amana or your retailer about buying an extended warranty.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. AMANA

SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow the exclusion or

limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This warranty gives you speciﬁc

legal rights, and you also may have other rights that vary from state to state or province to province.

http://amana.custhelp.com

MERCI d’avoir acheté ce produit de grande qualité. Enregistrer le four sur www.amanacanada.ca.

Pour référence ultérieure, consigner par écrit les numéros de modèle et de série de votre produit. Ces derniers peuvent

se trouver sous le panneau de commande.

Numéro de modèle _____________________________________ Numéro de série ________________________________________

Table des matières

INSTRUCTIONS D’UTILISATION

DU FOUR ÉLECTRIQUE

ENCASTRÉ

SÉCURITÉ DU FOUR ...................................................................16

GUIDE DES CARACTÉRISTIQUES .............................................18

UTILISATION DU FOUR ...............................................................20

Commandes électroniques du four ...........................................20

Mode Sabbat ..............................................................................21

Papier d’aluminium ....................................................................21

Positionnement des grilles et

des ustensiles de cuisson au four .............................................22

Évent du four ..............................................................................22

Cuisson au four et rôtissage ......................................................23

Cuisson au gril ............................................................................23

Maintien au chaud ......................................................................23

Favoris ........................................................................................24

Cuisson et maintien au chaud ...................................................24

Durée de cuisson .......................................................................25

ENTRETIEN DU FOUR .................................................................26

Programme d’autonettoyage .....................................................26

Nettoyage général ......................................................................27

Lampes du four ..........................................................................27

RÉSOLUTION DE PROBLÈMES .................................................28

ACCESSOIRES .............................................................................29

GARANTIE .....................................................................................30

SÉCURITÉ DU FOUR

Risque possible de décès ou de blessure grave si vous ne

suivez pas immédiatement les instructions.

Risque possible de décès ou de blessure grave si vous

ne suivez pas les instructions.

Tous les messages de sécurité vous diront quel est le danger potentiel et vous disent comment réduire le risque de blessure et

ce qui peut se produire en cas de non-respect des instructions.

Votre sécurité et celle des autres est très importante.

Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil ménager. Assurez-vous de

toujours lire tous les messages de sécurité et de vous y conformer.

AVERTISSEMENT

DANGER

Voici le symbole d’alerte de sécurité.

Ce symbole d’alerte de sécurité vous signale les dangers potentiels de décès et de blessures graves à vous

et à d’autres.

Tous les messages de sécurité suivront le symbole d’alerte de sécurité et le mot “DANGER” ou

“AVERTISSEMENT”. Ces mots signifient :

CONSERVEZ CES INSTRUCTIONS

IMPORTANTES INSTRUCTIONS DE SÉCURITÉ

AVERTISSEMENT : Pour réduire le risque d’incendie, de

choc électrique, de blessures corporelles ou de dommages

lors de l’utilisation du four, il convient d’observer certaines

précautions élémentaires dont les suivantes :

■ Installation appropriée – S’assurer que le four est

convenablement installé et relié à la terre par un technicien

qualifié.

■ Ne jamais utiliser le four pour chauffer ou réchauffer

une pièce.

■ Ne pas laisser les enfants seuls – Les enfants ne doivent

pas être laissés seuls ou sans surveillance dans la pièce

où le four est en service. Ne jamais laisser les enfants

s’asseoir ou se tenir sur une partie quelconque du four.

■ Porter des vêtements appropriés – Les vêtements amples

ou détachés ne doivent jamais être portés pendant

l’utilisation du four.

■ Entretien par l’utilisateur – Ne pas réparer ni remplacer

toute pièce du four si ce n’est pas spécifiquement

recommandé dans le manuel. Toute autre opération

d’entretien ou de réparation doit être confiée à un

technicien qualifié.

■ Ne pas utiliser d’eau pour éteindre un feu de graisse –

Étouffer le feu ou les flammes ou utiliser des extincteurs

polyvalents à produits chimiques secs ou un extincteur à

mousse.

■

Utiliser seulement des mitaines sèches de four – Des

mitaines de four mouillées ou humides sur des surfaces

chaudes peuvent provoquer des brûlures provenant de la

vapeur. Ne pas laisser les mitaines de four toucher les

éléments chauffants. Ne pas utiliser une serviette ou un

tissu épais.

■ Exercer une grande prudence lors de l’ouverture de la

porte. Laisser l’air chaud ou la vapeur s’échapper avant

d’enlever ou de remplacer un plat.

■ Ne pas faire chauffer des contenants fermés –

L’accumulation de pression peut causer une explosion du

contenant et des blessures.

■ Ne jamais obstruer les ouvertures des évents.

■ Placement des grilles du four – Toujours placer les grilles

du four à l’endroit désiré, lorsque le four est froid. Si la

grille doit être déplacée lorsque le four est chaud, ne pas

laisser des mitaines de four toucher l’élément chauffant

dans le four.

■ Remisage dans le four – Des matériaux inflammables ne

doivent pas être remisés dans un four.

■

NE PAS TOUCHER LES ÉLÉMENTS CHAUFFANTS OU

LES SURFACES INTÉRIEURES DU FOUR – les éléments

chauffants peuvent être chauds

même s’ils ont une teinte

foncée. Les surfaces intérieures de four deviennent assez

chaudes pour causer des brûlures. Pendant et après

l’utilisation, ne pas toucher ou laisser des vêtements ou

autres matériaux inflammables venir en contact avec les

éléments chauds ou les surfaces intérieures chaudes du

four avant qu’ils aient eu assez de temps pour refroidir.

D’autres surfaces du four peuvent devenir assez chaudes

pour causer des brûlures. Ces surfaces comprennent les

ouvertures de l’évent du four et la surface près de ces

ouvertures, les portes du four et les hublots des portes

du four.

Fours autonettoyants :

■

Ne pas nettoyer le joint de la porte – Le joint de la porte est

essentiel pour l’étanchéité. Veiller à ne pas frotter,

endommager ou déplacer le joint.

■ Ne pas utiliser les produits commerciaux de nettoyage de

four – On ne doit pas utiliser un produit commercial de

nettoyage de four ou un enduit de protection des surfaces

internes du four quel qu’en soit le type, sur les surfaces du

four ou les surfaces voisines.

■ Nettoyer uniquement les pièces indiquées dans le manuel.

■

Avant d’exécuter le programme d’autonettoyage du four,

enlever la lèchefrite et sa grille et les autres ustensiles.

Avertissements de la proposition 65 de l'État de Californie :

AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

cancers.

AVERTISSEMENT : Ce produit contient au moins un produit chimique connu par l’État de Californie pour être à l’origine de

malformations et autres déficiences de naissance.

GUIDE DES CARACTÉRISTIQUES

Ce manuel couvre différents modèles. Le modèle que vous avez peut comporter toutes les caractéristiques énumérées

ou seulement certaines d’entre elles. Consulter ce manuel ou la section d’aide à la clientèle sur www.amanacanada.ca

pour des instructions plus détaillées. Pour obtenir plus d’information sur une caractéristique ou sur les étapes pour utiliser les

caractéristiques mentionnées, consulter la section titre de la caractéristique.

Touche Caractéristique Instructions

CLOCK (horloge) Horloge

Cette horloge peut utiliser un programme de 12 ou 24 heures. Voir la section

“Commandes électroniques du four”.

1. Appuyer sur CLOCK (horloge) jusqu’à afﬁcher “Clock” (horloge).

2. Appuyer sur les touches numériques pour régler l’heure du jour.

3. Appuyer sur START (mise en marche).

LIGHT

(lampe du four)

Lampe de la

cavité du four

Alors que la(les) porte(s) du four sont fermées, appuyer sur LIGHT (lampe du

four) pour allumer ou éteindre la(les) lampe(s). La(Les) lampe(s) du four s’allument

à l’ouverture de la porte.

TIMER ON•OFF

(marche•arrêt

de la minuterie)

Minuterie du four

La minuterie peut être réglée en heures ou en minutes jusqu’à concurrence de 9 heures

et 59 minutes.

1. Appuyer sur TIMER ON•OFF (marche•arrêt de la minuterie).

2. Appuyer sur les touches numériques pour régler la durée en hr-min. Les zéros

de gauche peuvent ne pas être entrés. Entrer “2” pour 2 minutes par exemple.

3. Appuyer sur TIMER ON•OFF (marche•arrêt de la minuterie) pour commencer le compte

à rebours. Si activés, le(les) signal(signaux) sonore(s) de la minuterie retentissent à la ﬁn

du compte à rebours.

4. Appuyer sur TIMER ON•OFF (marche•arrêt de la minuterie) pour annuler la minuterie

et revenir à l’heure du jour. Ne pas appuyer sur OFF/CANCEL (arrêt/annulation), sinon

le four s’éteindra.

START

(mise en marche)

Démarrage

de la cuisson

La touche Start (mise en marche) met en marche n’importe quelle fonction du four.

Si, après avoir appuyé sur une touche, on n’appuie pas sur Start (mise en marche)

dans les 2 minutes qui suivent, la fonction est annulée et l’heure s’afﬁche.

OFF/CANCEL

(arrêt/annulation)

Fonction du four

La touche Off/Cancel (arrêt/annulation) désactive toutes les fonctions du four à l'exception

de l'horloge, de la minuterie et du verrouillage des commandes du four.

BAKE

(cuisson au four)

Cuisson au four

et rôtissage

1. Appuyer sur BAKE (cuisson au four).

2. Utiliser les touches numériques pour régler la température souhaitée. Si la température

entrée ne se trouve pas dans la fourchette des températures autorisées, la température

minimale ou maximale autorisée s’afﬁche. Entrer une température dans la fourchette

autorisée.

3. (Cuisson au four sur une seule grille uniquement) Appuyer sur START (mise en marche).

Le préchauffage rapide démarre.

IMPORTANT : La fonction de préchauffage rapide doit être utilisée uniquement

pour la cuisson au four sur une seule grille.

4. (Cuisson au four sur plusieurs grilles) Appuyer sur START (mise en marche). Appuyer

de nouveau sur la touche START (mise en marche) pour annuler le préchauffage rapide.

5. Pour modiﬁer la température, répéter les étapes 2 et 3.

6. Appuyer sur OFF/CANCEL (arrêt/annulation) après avoir terminé.

AVERTISSEMENT

Risque d'empoisonnement alimentaire

Ne pas laisser des aliments dans un four plus d'une

heure avant ou après la cuisson.

Le non-respect de cette instruction peut causer un

empoisonnement alimentaire ou une maladie.

Touche Caractéristique Instructions

BROIL

(cuisson au gril)

Cuisson au gril

1. Appuyer sur BROIL (cuisson au gril).

2. Utiliser les touches numériques pour régler la température souhaitée. Si la température

entrée ne se trouve pas dans la fourchette des températures autorisées, la température

minimale ou maximale autorisée s’afﬁche. Entrer une température dans la fourchette

autorisée.

3. Appuyer sur START (mise en marche), et laisser le four préchauffer pendant 5 minutes.

4. Placer les ustensiles de cuisine dans le four et fermer la porte du four.

5. Pour modiﬁer la température, répéter les étapes 2 et 3.

6. Appuyer sur OFF/CANCEL (arrêt/annulation) après avoir terminé.

FAVORITE

(recette favorite)

Recette favorite

sauvegardée

La caractéristique Favori permet de sauvegarder les réglages de durée et de température

de n’importe quelle fonction de cuisson active. Pour sauvegarder et employer la recette

favorite, consulter la section “Recette favorite”.

KEEP WARM

(maintien

au chaud)

Maintien au chaud

Les aliments doivent être à la température de service avant d’être placés

dans le four chaud.

1. Appuyer sur KEEP WARM (maintien au chaud).

2. Utiliser les touches numériques pour régler la température souhaitée. Si la température

entrée ne se trouve pas dans la fourchette des températures autorisées, la température

minimale ou maximale autorisée s’afﬁche. Entrer une température dans la fourchette

autorisée.

3. Appuyer sur START (mise en marche).

4. Pour changer la température, répéter les étapes 2 et 3.

5. Appuyer sur OFF/CANCEL (arrêt/annulation) après avoir terminé.

DELAY START

(mise en marche

différée)

Mise en marche

différée

La touche Delay Start (mise en marche différée) sert à entrer l’heure de mise en marche

pour un four équipé d’une fonction de mise en marche différée. Le mise en marche

différée ne doit pas être utilisée pour les aliments tels que pains et gâteaux, car ils

risquent de ne pas bien cuire.

Pour régler une cuisson minutée ou une cuisson minutée différée, voir la section

“Durée de cuisson”.

COOK TIME

(durée de cuisson)

Cuisson minutée

La fonction de durée de cuisson permet d’allumer le four à une certaine heure de

la journée, d’effectuer une cuisson pendant une durée déterminée et/ou d’éteindre

le four automatiquement.

Pour régler une cuisson minutée ou une cuisson minutée différée, voir la section

“Durée de cuisson”.

COOK & HOLD

(cuisson et

maintien au

chaud)

Cuisson minutée

et maintien

au chaud

La fonction Cook & Hold (cuisson et maintien au chaud) permet de régler une cuisson

au four pendant une durée déterminée suivie d’un programme de maintien au chaud

d’une (1) heure.

Pour régler une cuisson et maintien au chaud ou une cuisson différée et maintien au chaud,

voir la section “Cuisson et maintien au chaud”.

SELF CLEAN

(autonettoyage)

Programme

d'autonettoyage

Voir la section “Programme d’autonettoyage”.

CONTROL LOCK

hold 3 sec.

(commandes

verrouillées

appuyer pendant

3 sec.)

Verrouillage

des commandes

du four

1. Vériﬁer que toutes les fonctions du four et de la table de cuisson sont désactivées,

y compris les fonctions de minuterie et de cuisson minutée.

2. Appuyer sans relâcher sur CONTROL LOCK (commandes verrouillées) pendant

3 secondes.

3. Si cette fonction est activée, un signal sonore retentit et les commandes

sont verrouillées.

4. Répéter pour déverrouiller. Aucune touche ne fonctionne lorsque les commandes

sont verrouillées.

SETTINGS

(réglages)

Fonctions

d'utilisation

du four

Permet de personnaliser les signaux sonores audibles et le fonctionnement du four

pour convenir à vos besoins. Voir la section “Utilisation du four”.

UTILISATION DU FOUR

Des odeurs et de la fumée sont normales lorsque le four

est utilisé la première fois, ou lorsqu’il est très sale.

IMPORTANT : Certains oiseaux sont très sensibles aux

émanations de fumée. L’exposition aux émanations peut

entraîner la mort de certains oiseaux. Toujours déplacer

les oiseaux dans une autre pièce fermée et bien aérée.

Commandes électroniques du four

Afﬁchage des commandes

L’afﬁchage clignote lorsqu’il est mis en marche ou après

une coupure de courant. Lorsque le four n’est pas en marche,

l’heure du jour est afﬁchée.

Signaux sonores

Les signaux sonores indiquent ce qui suit :

Un seul signal sonore

■ Appui sur une touche valide.

■ Le four est préchauffé (signal sonore long).

■ Minuteur de cuisine (signal sonore long avec signal sonore

de rappel toutes les 60 secondes).

■ Fonction entrée.

Trois signaux sonores

■ Appui sur une touche non valide

Quatre signaux sonores

■ Fin de programme (avec signal sonore de rappel toutes

les 60 secondes).

Appuyer sur la touche Settings (réglages) pour modiﬁer

les réglages des signaux sonores.

Réglages

De nombreuses caractéristiques du module de commande du four

peuvent être ajustées pour répondre à vos besoins. On effectue

ces changements à l’aide de la touche Settings (réglages).

Utiliser la touche Settings (réglages) pour faire déﬁler les

caractéristiques qui peuvent être modiﬁées. L’afﬁchage passe

au réglage suivant à chaque pression supplémentaire sur Settings

(réglages). Après avoir sélectionné la caractéristique à modiﬁer,

le tableau de commande demande à l’utilisateur d’effectuer la

manœuvre nécessaire. Les sections suivantes détaillent toutes

les modiﬁcations de caractéristiques.

Appuyer sur OFF/CANCEL (arrêt/annulation) pour sortir

du mode Settings (réglages).

Fahrenheit et Celsius

Le four est préréglé pour un afﬁchage de la température en degrés

Fahrenheit, mais on peut le permuter en degrés Celsius.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que

“TEMP UNIT” (unité de température) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter

ce mode et afﬁcher l’heure.

Désactivation des signaux sonores

Désactive la majorité des signaux sonores, y compris le signal

sonore de ﬁn de programme et les signaux sonores d’appui sur

une touche. Les signaux sonores de rappel restent actifs lorsque

les sons sont désactivés.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “SOUND”

(signaux sonores) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter

ce mode et afﬁcher l’heure.

Volume sonore

Règle le timbre du signal sonore à bas ou élevé.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que

“SOUND VOLUME” (volume sonore) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter

ce mode et afﬁcher l’heure.

Signal sonore de ﬁn de programme

Active ou désactive les signaux sonores qui retentissent

à la ﬁn d’un programme.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “END TONE”

(signal de ﬁn) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter

ce mode et afﬁcher l’heure.

Signaux sonores d’appui sur une touche

Active ou désactive les signaux sonores lorsqu’on appuie

sur une touche.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que “KEYPRESS

TONE” (signal de pression sur une touche) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter

ce mode et afﬁcher l’heure.

Désactivation des signaux sonores de rappel

Désactive les courts signaux sonores qui retentissent toutes

les minutes après les signaux sonores de ﬁn de programme.

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que

“REMINDER TONE” (signal de rappel) s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter

ce mode et afﬁcher l’heure.

Horloge 12/24 heures

1. Appuyer sur SETTINGS (réglages) jusqu’à ce que

“12/24 HOUR” s’afﬁche.

2. Le réglage utilisé à ce moment-là s’afﬁche.

3. Appuyer sur la touche “1” pour modiﬁer le réglage.

4. Appuyer sur OFF/CANCEL (arrêt/annulation) pour quitter

ce mode et afﬁcher l’heure.

La page charge ...

Amana AWO6317SFS Manuel utilisateur

Marque: Amana

Modèle: AWO6317SFS

Catégorie: Cuisinières

Taper: Manuel utilisateur

Télécharger le PDF

rapport

dans d''autres langues

English: Amana AWO6317SFS User manual

Amana AWO6317SFS Manuel utilisateur

Amana AWO6317SFS Manuel utilisateur

dans d''autres langues

Documents connexes

Autres documents